From mboxrd@z Thu Jan  1 00:00:00 1970
From: Tapani Utriainen <tapani@technexion.com>
Date: Fri, 30 Aug 2013 13:16:56 +0800
Subject: [U-Boot] [PATCH] Add support for TechNexion edm1-cf-imx6 SoM
In-Reply-To: <20130828162644.296f9336@e6520eb>
References: <20130828192333.21f7ca6b@triceratops>
	<20130828162644.296f9336@e6520eb>
Message-ID: <20130830131656.0dc07237@triceratops>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Eric,


On Wed, 28 Aug 2013 16:26:44 +0200
Eric B?nard <eric@eukrea.com> wrote:

> Le Wed, 28 Aug 2013 19:23:33 +0800,
> Tapani <tapani@technexion.com> a ?crit :
> 
> > 
> >     Add support for TechNexion edm-cf-imx6 SoM
> > 
> >     The edm1-cf-imx6 SoM comes in three variants, one with imx6 solo cpu,
> >     one with an imx6 dual lite cpu and one with an imx6 quad cpu.
> > 
> aren't these boards Wandboard without the MicroSD connector but with
> either a eMMC or a NAND ?

No.

While u-boot level edm-cf-imx6 is compatible with Wandboard, there are differences 
(some different pin definitions, different wifi chips, different board ids, 
different maintainers, ... ). Also there is going to be a edm2-cf-imx6 module, 
which we are hoping to be able to share code with instead.

However if someone wants to play with the SPL boot, a edm-cf-imx6 u-boot should 
work on a Wandboard (after changing machine id).

//Tapani