From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings
Date: Fri, 13 Dec 2013 12:48:32 +0100 [thread overview]
Message-ID: <201312131248.32208.marex@denx.de> (raw)
In-Reply-To: <1386899355-17379-6-git-send-email-troy.kisky@boundarydevices.com>
On Friday, December 13, 2013 at 02:49:09 AM, Troy Kisky wrote:
> Don't use 0x80000000 to get default pad settings.
What is the rationale behind this change please? Can you explain more in detail?
> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
> ---
> arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index be899d3..b548647 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> @@ -114,13 +114,13 @@
> imx6q-sabrelite {
> pinctrl_hog: hoggrp {
> fsl,pins = <
> -/* uSDHC4 CD */ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000
> -/* spi-nor CS */ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000
> -/* otg power en */ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
> -/* ethernet phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
> -/* USDHC3 CD */ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
> -/* USDHC3 WP */ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
> -/* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
> +/* uSDHC4 CD */ MX6QDL_PAD_NANDF_D6__GPIO2_IO06
0x1b0b0
> +/* spi-nor CS */ MX6QDL_PAD_EIM_D19__GPIO3_IO19
0x1b0b0
> +/* otg power en */ MX6QDL_PAD_EIM_D22__GPIO3_IO22
0x1b0b0
> +/* ethernet phy reset */ MX6QDL_PAD_EIM_D23__GPIO3_IO23
0x000b0
> +/* USDHC3 CD */ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00
0x1b0b0
> +/* USDHC3 WP */ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01
0x1f0b0
> +/* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1
0x000b0
>
> >;
>
> };
Best regards,
Marek Vasut
next prev parent reply other threads:[~2013-12-13 11:48 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-13 1:49 [PATCH V1 00/11] Update Sabre Lite Troy Kisky
2013-12-13 1:49 ` [PATCH V1 01/11] ARM: dts: imx: sabrelite: add Dual Lite/Solo support Troy Kisky
2013-12-13 11:46 ` Marek Vasut
2013-12-13 18:51 ` Troy Kisky
2013-12-13 21:51 ` Marek Vasut
2013-12-13 1:49 ` [PATCH V1 02/11] ARM: dts: imx6qdl-sabrelite: Add uart1 support Troy Kisky
2013-12-13 11:46 ` Marek Vasut
2013-12-13 1:49 ` [PATCH V1 03/11] ARM: dts: imx6qdl-sabrelite: remove usdhc4 wp-gpio Troy Kisky
2013-12-13 11:46 ` Marek Vasut
2013-12-14 13:46 ` Shawn Guo
2013-12-16 19:42 ` Troy Kisky
2013-12-16 19:54 ` Marek Vasut
2013-12-16 23:59 ` Troy Kisky
2013-12-13 1:49 ` [PATCH V1 04/11] ARM: dts: imx6qdl-sabrelite: add comments for pinctrl_hog Troy Kisky
2013-12-13 11:47 ` Marek Vasut
2013-12-14 13:54 ` Shawn Guo
2013-12-13 1:49 ` [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings Troy Kisky
2013-12-13 11:48 ` Marek Vasut [this message]
2013-12-13 18:42 ` Troy Kisky
2013-12-13 21:50 ` Marek Vasut
2013-12-14 1:44 ` Troy Kisky
2013-12-14 5:00 ` Marek Vasut
2013-12-14 13:29 ` Shawn Guo
2013-12-14 14:16 ` Marek Vasut
2013-12-13 1:49 ` [PATCH V1 06/11] ARM: dts: imx6qdl-sabrelite: add gpio-keys Troy Kisky
2013-12-13 11:51 ` Marek Vasut
2013-12-13 18:45 ` Troy Kisky
2013-12-13 21:50 ` Marek Vasut
2013-12-13 21:55 ` Eric Nelson
2013-12-14 5:00 ` Marek Vasut
2013-12-14 13:57 ` Shawn Guo
2013-12-13 1:49 ` [PATCH V1 07/11] ARM: dts: imx6qdl-sabrelite: add pwms for backlights Troy Kisky
2013-12-13 11:53 ` Marek Vasut
2013-12-13 14:09 ` Eric Nelson
2013-12-13 1:49 ` [PATCH V1 08/11] ARM: dts: imx6qdl-sabrelite: add skews for Micrel phy Troy Kisky
2013-12-13 11:53 ` Marek Vasut
2013-12-13 1:49 ` [PATCH V1 09/11] ARM: dts: imx6qdl-sabrelite: fix ENET group Troy Kisky
2013-12-13 11:54 ` Marek Vasut
2013-12-13 1:49 ` [PATCH V1 10/11] ARM: dts: imx6qdl-sabrelite: Add over-current pin to usbotg Troy Kisky
2013-12-13 11:54 ` Marek Vasut
2013-12-13 1:49 ` [PATCH V1 11/11] ARM: dts: imx: add nitrogen6x board Troy Kisky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201312131248.32208.marex@denx.de \
--to=marex@denx.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.