From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Tue, 11 Feb 2014 09:13:22 +0200 From: Andrei Emeltchenko To: Marcel Holtmann Cc: "Viswanatham, RaviTeja" , "bluez mailin list (linux-bluetooth@vger.kernel.org)" Subject: Re: Message-ID: <20140211071321.GB8980@aemeltch-MOBL1> References: <9BC883E0D59F6B4DBD525D460025714B08AE336F@deessmx03.dees.eberspaecher.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: List-ID: Hi All, On Mon, Feb 10, 2014 at 10:35:24AM -0800, Marcel Holtmann wrote: > Hi Ravi, > > > I am working on Ubuntu 12.04 with a Bluetooth 3.0 +HS + wifi combo USB > > dongle. > > > > I want to reach a data transfer speed of up to 24 Mbit/s. > > > > My Questions: Does Bluez support high speed data transfer rates up to > > 24 Mbit/s (Bluetooth 3.0+HS) ? > > > > If it does, is there any user configuration involved to achieve that? > > What other requirements need to be met? Does, Bluetooth enables AMP > > function to communicate 802.11n channel to support high speed or it > > has to be configure with any other drivers? > > > > I am new to Linux a detail explanation would be really appreciated. > > Thank you in advance for your support. > > we do support Bluetooth HS operation. However your WiFi device needs to > be exposed as AMP Controller. Most WiFi hardware needs a special driver > to expose itself as AMP Controller. There is no generic driver for > mac80211 subsystem in the kernel. Some devices have AMP Controller implemented in firmware. I was using Marvell SD8787, probably newer Marvell devices also works. You may check drivers/bluetooth/btmrvl_main.c to see how HCI dev_type HCI_AMP is assigned. Best regards Andrei Emeltchenko