[PATCH 3.12 000/107] 3.12.11-stable review

[PATCH 3.12 000/107] 3.12.11-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.12.11 release.
There are 107 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Feb 13 18:47:29 UTC 2014.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.12.11-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.12.11-rc1

Adrian Hunter <adrian.hunter@intel.com>
    mmc: sdhci-pci: Fix possibility of chip->fixes being null

Adrian Hunter <adrian.hunter@intel.com>
    mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend

Borislav Petkov <bp@alien8.de>
    rtc-cmos: Add an alarm disable quirk

John Stultz <john.stultz@linaro.org>
    timekeeping: Fix missing timekeeping_update in suspend path

John Stultz <john.stultz@linaro.org>
    timekeeping: Fix CLOCK_TAI timer/nanosleep delays

John Stultz <john.stultz@linaro.org>
    3.13.y: timekeeping: Fix clock_set/clock_was_set think-o

John Stultz <john.stultz@linaro.org>
    timekeeping: Avoid possible deadlock from clock_was_set_delayed

John Stultz <john.stultz@linaro.org>
    timekeeping: Fix potential lost pv notification of time change

John Stultz <john.stultz@linaro.org>
    timekeeping: Fix lost updates to tai adjustment

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ftrace: Have function graph only trace based on global_ops filters

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ftrace: Fix synchronization location disabling and freeing ftrace_ops

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ftrace: Synchronize setting function_trace_op with ftrace_trace_function

Dave Airlie <airlied@redhat.com>
    drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversion

Dave Airlie <airlied@redhat.com>
    drm/mgag200: fix typo causing bw limits to be ignored on some chips

Dave Airlie <airlied@redhat.com>
    drm/mgag200: fix oops in cursor code.

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"

Dave Airlie <airlied@redhat.com>
    drm: ast,cirrus,mgag200: use drm_can_sleep

Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
    drm/gma500: Lock struct_mutex around cursor updates

Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
    drm/rcar-du: Update plane pitch in .mode_set_base() operation

Daniel Vetter <daniel.vetter@ffwll.ch>
    drm/gem: Always initialize the gem object in object_init

Takashi Iwai <tiwai@suse.de>
    drm/cirrus: correct register values for 16bpp

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Decouple GPU error reporting from ring initialisation

Stanislaw Gruszka <sgruszka@redhat.com>
    i915: remove pm_qos request on error

Todd Previte <tprevite@gmail.com>
    drm/i915: VLV2 - Fix hotplug detect bits

Akash Goel <akash.goel@intel.com>
    drm/i915: Fix the offset issue for the stolen GEM objects

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Flush outstanding requests before allocating new seqno

Ilia Mirkin <imirkin@alum.mit.edu>
    drm/nouveau/falcon: use vmalloc to create firwmare copies

Maarten Lankhorst <maarten.lankhorst@canonical.com>
    drm/nouveau: fix m2mf copy to tiled gart

Mikulas Patocka <mpatocka@redhat.com>
    dm sysfs: fix a module unload race

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon/dce8: workaround for atom BlankCrtc table

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon/DCE4+: clear bios scratch dpms bit (v2)

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix DAC interrupt handling on DCE5+

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add UVD support for OLAND

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: set the full cache bit for fences on r7xx+

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix surface sync in fence on cayman (v2)

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: disable ss on DP for DCE3.x

Marek Olšák <marek.olsak@amd.com>
    drm/radeon: skip colorbuffer checking if COLOR_INFO.FORMAT is set to INVALID

Malcolm Priestley <tvboxspy@gmail.com>
    m88rs2000: set symbol rate accurately

Malcolm Priestley <tvboxspy@gmail.com>
    m88rs2000: add m88rs2000_set_carrieroffset

Olivier Grenie <olivier.grenie@parrot.com>
    dib8000: fix regression with dib807x

Mauro Carvalho Chehab <m.chehab@samsung.com>
    nxt200x: increase write buffer size

Malcolm Priestley <tvboxspy@gmail.com>
    it913x: Add support for Avermedia H335 id 0x0335

Marek Szyprowski <m.szyprowski@samsung.com>
    media: s5p_mfc: remove s5p_mfc_get_node_type() function

Mauro Carvalho Chehab <m.chehab@samsung.com>
    dib8000: make 32 bits read atomic

Antti Palosaari <crope@iki.fi>
    media: anysee: fix non-working E30 Combo Plus DVB-T

Marek Szyprowski <m.szyprowski@samsung.com>
    media: media: v4l2-dev: fix video device index assignment

David Rientjes <rientjes@google.com>
    mm, oom: base root bonus on current usage

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Fix connection reset hang with percpu_ida_alloc

Kent Overstreet <kmo@daterainc.com>
    percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask

Paul Bolle <pebolle@tiscali.nl>
    mei: mei_hbm_dispatch() returns void

Michel Dänzer <michel.daenzer@amd.com>
    radeon/pm: Guard access to rdev->pm.power_state array

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon/dpm: disable mclk switching on desktop RV770

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: warn users when hw_i2c is enabled (v2)

Joe Thornber <ejt@redhat.com>
    dm space map metadata: fix bug in resizing of thin metadata

Joe Thornber <ejt@redhat.com>
    dm space map metadata: fix extending the space map

Joe Thornber <ejt@redhat.com>
    dm space map common: make sure new space is used during extend

Mikulas Patocka <mpatocka@redhat.com>
    dm: wait until embedded kobject is released before destroying a device

Mike Snitzer <snitzer@redhat.com>
    dm thin: fix set_pool_mode exposed pool operation races

Mike Snitzer <snitzer@redhat.com>
    dm thin: initialize dm_thin_new_mapping returned by get_next_mapping

Joe Thornber <ejt@redhat.com>
    dm thin: fix discard support to a previously shared block

Jeff Layton <jlayton@redhat.com>
    sunrpc: don't wait for write before allowing reads from use-gss-proxy file

Weston Andros Adamson <dros@netapp.com>
    sunrpc: Fix infinite loop in RPC state machine

Trond Myklebust <trond.myklebust@primarydata.com>
    NFSv4: Fix a slot leak in nfs40_sequence_done

Boaz Harrosh <bharrosh@panasas.com>
    pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done

Weston Andros Adamson <dros@primarydata.com>
    nfs4: fix discover_server_trunking use after free

Trond Myklebust <trond.myklebust@primarydata.com>
    NFSv4.1: Handle errors correctly in nfs41_walk_client_list

Scott Mayhew <smayhew@redhat.com>
    nfs: always make sure page is up-to-date before extending a write to cover the entire page

Weston Andros Adamson <dros@primarydata.com>
    nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME

Trond Myklebust <Trond.Myklebust@netapp.com>
    NFSv4: OPEN must handle the NFS4ERR_IO return code correctly

Mika Westerberg <mika.westerberg@linux.intel.com>
    spi/pxa2xx: initialize DMA channels to -1 to prevent inadvertent match

Daniel Santos <daniel.santos@pobox.com>
    spidev: fix hang when transfer_one_message fails

Jonas Gorski <jogo@openwrt.org>
    spi/bcm63xx: don't substract prepend length from total length

Ira Weiny <ira.weiny@intel.com>
    IB/qib: Fix QP check when looping back to/from QP1

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: xtfpga: fix definitions of platform devices

Boaz Harrosh <bharrosh@panasas.com>
    ore: Fix wrong math in allocation of per device BIO

Michael Grzeschik <m.grzeschik@pengutronix.de>
    mtd: mxc_nand: remove duplicated ecc_stats counting

Heiko Carstens <heiko.carstens@de.ibm.com>
    tile: remove compat_sys_lookup_dcookie declaration to fix compile error

Heiko Carstens <heiko.carstens@de.ibm.com>
    fs/compat: fix lookup_dcookie() parameter handling

Heiko Carstens <heiko.carstens@de.ibm.com>
    fs/compat: fix parameter handling for compat readv/writev syscalls

Heiko Carstens <heiko.carstens@de.ibm.com>
    compat: fix sys_fanotify_mark

Mark Brown <broonie@linaro.org>
    ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API

Josh Triplett <josh@joshtriplett.org>
    turbostat: Use GCC's CPUID functions to support PIC

Josh Triplett <josh@joshtriplett.org>
    turbostat: Don't put unprocessed uapi headers in the include path

Li Zefan <lizefan@huawei.com>
    slub: Fix calculation of cpu slabs

Gregory CLEMENT <gregory.clement@free-electrons.com>
    ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed

Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
    ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER

Wolfram Sang <wsa@the-dreams.de>
    mmc: core: sd: implement proper support for sd3.0 au sizes

Ludovic Desroches <ludovic.desroches@atmel.com>
    mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

Ray Jui <rjui@broadcom.com>
    mmc: fix host release issue after discard operation

Andrey Vagin <avagin@openvz.org>
    mm: don't lose the SOFT_DIRTY flag on mprotect

Cyrill Gorcunov <gorcunov@gmail.com>
    mm: ignore VM_SOFTDIRTY on VMA merging

Michal Hocko <mhocko@suse.cz>
    memcg: fix css reference leak and endless loop in mem_cgroup_iter

Michal Hocko <mhocko@suse.cz>
    memcg: fix endless loop caused by mem_cgroup_iter

Johannes Weiner <hannes@cmpxchg.org>
    mm/page-writeback.c: do not count anon pages as dirtyable memory

Johannes Weiner <hannes@cmpxchg.org>
    mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory

Hugh Dickins <hughd@google.com>
    mm/memcg: iteration skip memcgs not yet fully initialized

Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
    mm/memory-failure.c: shift page lock from head page to tail page after thp split

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/pvhvm: If xen_platform_pci=0 is set don't blow up (v4).

AKASHI Takahiro <takahiro.akashi@linaro.org>
    audit: correct a type mismatch in audit_syscall_exit()

Richard Guy Briggs <rgb@redhat.com>
    audit: reset audit backlog wait time after error recovery

Miklos Szeredi <mszeredi@suse.cz>
    fuse: fix pipe_buf_operations

Bjorn Helgaas <bhelgaas@google.com>
    Revert "EISA: Initialize device before its resources"

Alex Williamson <alex.williamson@redhat.com>
    intel-iommu: fix off-by-one in pagetable freeing

Wanlong Gao <gaowanlong@cn.fujitsu.com>
    arch/sh/kernel/kgdb.c: add missing #include <linux/sched.h>

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracing: Check if tracing is enabled in trace_puts()

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    tracing: Have trace buffer point back to trace_array

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    SELinux: Fix memory leak upon loading policy


-------------

Diffstat:

 Documentation/filesystems/proc.txt                 |   4 +-
 Makefile                                           |   4 +-
 arch/arm/mach-mvebu/mvebu-soc-id.c                 |   2 +-
 arch/arm/plat-orion/irq.c                          |  47 +++++
 arch/sh/kernel/kgdb.c                              |   1 +
 arch/tile/include/asm/compat.h                     |   1 -
 arch/x86/include/asm/pgtable_types.h               |   3 +-
 arch/x86/xen/platform-pci-unplug.c                 |  74 ++++++++
 arch/xtensa/platforms/xtfpga/setup.c               |  12 +-
 drivers/acpi/bus.c                                 |   9 +
 drivers/block/xen-blkfront.c                       |   4 +-
 drivers/char/tpm/xen-tpmfront.c                    |   4 +
 drivers/eisa/eisa-bus.c                            |  26 +--
 drivers/gpu/drm/ast/ast_fb.c                       |   2 +-
 drivers/gpu/drm/cirrus/cirrus_fbdev.c              |   2 +-
 drivers/gpu/drm/cirrus/cirrus_mode.c               |   4 +-
 drivers/gpu/drm/drm_gem.c                          |   3 +-
 drivers/gpu/drm/gma500/gma_display.c               |  12 +-
 drivers/gpu/drm/i915/i915_dma.c                    |   1 +
 drivers/gpu/drm/i915/i915_drv.h                    |   1 +
 drivers/gpu/drm/i915/i915_gem_stolen.c             |   2 +-
 drivers/gpu/drm/i915/i915_gpu_error.c              |  22 ++-
 drivers/gpu/drm/i915/i915_reg.h                    |  10 +-
 drivers/gpu/drm/i915/intel_dp.c                    |  40 +++--
 drivers/gpu/drm/i915/intel_ringbuffer.c            |  12 +-
 drivers/gpu/drm/mgag200/mgag200_cursor.c           |   8 +-
 drivers/gpu/drm/mgag200/mgag200_fb.c               |   2 +-
 drivers/gpu/drm/mgag200/mgag200_mode.c             |   4 +-
 drivers/gpu/drm/nouveau/core/engine/falcon.c       |  20 ++-
 drivers/gpu/drm/nouveau/nouveau_bo.c               |  33 +---
 drivers/gpu/drm/radeon/atombios_crtc.c             |  25 ++-
 drivers/gpu/drm/radeon/evergreen.c                 |   4 +-
 drivers/gpu/drm/radeon/evergreen_cs.c              |   5 +-
 drivers/gpu/drm/radeon/ni.c                        |  16 +-
 drivers/gpu/drm/radeon/nid.h                       |   1 +
 drivers/gpu/drm/radeon/r600.c                      |  13 +-
 drivers/gpu/drm/radeon/r600_cs.c                   |   5 +-
 drivers/gpu/drm/radeon/r600d.h                     |   1 +
 drivers/gpu/drm/radeon/radeon_atombios.c           |   4 +
 drivers/gpu/drm/radeon/radeon_i2c.c                |   3 +
 drivers/gpu/drm/radeon/radeon_pm.c                 |   6 +-
 drivers/gpu/drm/radeon/radeon_uvd.c                |   1 +
 drivers/gpu/drm/radeon/rv770_dpm.c                 |   6 +
 drivers/gpu/drm/radeon/si.c                        |   2 +-
 drivers/gpu/drm/radeon/sid.h                       |   2 +-
 drivers/gpu/drm/radeon/uvd_v2_2.c                  |   1 +
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c             |   1 -
 drivers/gpu/drm/rcar-du/rcar_du_plane.c            |  21 +--
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c            |   9 +-
 drivers/infiniband/hw/qib/qib_ud.c                 |   9 +-
 drivers/input/misc/xen-kbdfront.c                  |   4 +
 drivers/iommu/intel-iommu.c                        |   2 +-
 drivers/md/Kconfig                                 |   4 +
 drivers/md/Makefile                                |   1 +
 drivers/md/dm-builtin.c                            |  48 ++++++
 drivers/md/dm-sysfs.c                              |   5 +-
 drivers/md/dm-thin-metadata.c                      |  20 +++
 drivers/md/dm-thin-metadata.h                      |   2 +
 drivers/md/dm-thin.c                               |  71 +++++---
 drivers/md/dm.c                                    |  15 +-
 drivers/md/dm.h                                    |  17 ++
 drivers/md/persistent-data/dm-space-map-common.c   |   6 +-
 drivers/md/persistent-data/dm-space-map-metadata.c |  28 ++-
 drivers/media/dvb-core/dvb-usb-ids.h               |   1 +
 drivers/media/dvb-frontends/dib8000.c              |  42 +++--
 drivers/media/dvb-frontends/m88rs2000.c            | 117 +++++++++----
 drivers/media/dvb-frontends/m88rs2000.h            |   2 +
 drivers/media/dvb-frontends/nxt200x.c              |   2 +-
 drivers/media/platform/s5p-mfc/s5p_mfc.c           |  28 +--
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h    |   9 -
 drivers/media/usb/dvb-usb-v2/anysee.c              |   3 +-
 drivers/media/usb/dvb-usb-v2/it913x.c              |   3 +
 drivers/media/v4l2-core/v4l2-dev.c                 |   2 +-
 drivers/misc/mei/hbm.c                             |   2 +-
 drivers/mmc/card/block.c                           |   7 +-
 drivers/mmc/core/sd.c                              |  37 ++--
 drivers/mmc/host/atmel-mci.c                       |  13 +-
 drivers/mmc/host/sdhci-pci.c                       |  12 ++
 drivers/mtd/nand/mxc_nand.c                        |   1 -
 drivers/net/xen-netfront.c                         |   2 +-
 drivers/pci/xen-pcifront.c                         |   4 +
 drivers/rtc/rtc-cmos.c                             |  52 +++++-
 drivers/spi/spi-bcm63xx.c                          |   2 -
 drivers/spi/spi-pxa2xx.c                           |   2 +
 drivers/spi/spi.c                                  |   4 +-
 drivers/target/iscsi/iscsi_target_util.c           |   8 +-
 drivers/vhost/scsi.c                               |   2 +-
 drivers/video/xen-fbfront.c                        |   4 +
 drivers/xen/xenbus/xenbus_probe_frontend.c         |   2 +-
 fs/dcookies.c                                      |   2 +-
 fs/exofs/ore.c                                     |  37 ++--
 fs/fuse/dev.c                                      |  22 +--
 fs/nfs/nfs4client.c                                |  18 +-
 fs/nfs/nfs4proc.c                                  |  40 ++++-
 fs/nfs/nfs4xdr.c                                   |  47 +++--
 fs/nfs/write.c                                     |  11 +-
 fs/notify/fanotify/fanotify_user.c                 |   4 +-
 fs/read_write.c                                    |  16 +-
 fs/splice.c                                        |  18 ++
 include/linux/audit.h                              |   2 +-
 include/linux/compat.h                             |  18 +-
 include/linux/percpu_ida.h                         |   3 +-
 include/linux/pipe_fs_i.h                          |   2 +
 include/linux/vmstat.h                             |   2 -
 include/scsi/osd_ore.h                             |   1 +
 include/xen/platform_pci.h                         |  23 +++
 kernel/audit.c                                     |   5 +-
 kernel/time/timekeeping.c                          |  47 +++--
 kernel/trace/ftrace.c                              | 190 ++++++++++++++++-----
 kernel/trace/trace.c                               |   8 +
 lib/percpu_ida.c                                   |  21 ++-
 mm/internal.h                                      |   1 -
 mm/memcontrol.c                                    |  37 ++--
 mm/memory-failure.c                                |  21 +--
 mm/mmap.c                                          |  12 +-
 mm/oom_kill.c                                      |   2 +-
 mm/page-writeback.c                                |  57 +++----
 mm/slub.c                                          |   8 +-
 mm/vmscan.c                                        |  23 +--
 net/core/skbuff.c                                  |  32 +---
 net/sunrpc/auth_gss/gss_rpc_upcall.c               |   2 -
 net/sunrpc/auth_gss/svcauth_gss.c                  |  33 +---
 net/sunrpc/clnt.c                                  |   8 +-
 net/sunrpc/netns.h                                 |   1 -
 security/selinux/ss/policydb.c                     |  14 +-
 tools/power/x86/turbostat/Makefile                 |   2 +-
 tools/power/x86/turbostat/turbostat.c              |  13 +-
 127 files changed, 1302 insertions(+), 591 deletions(-)

[PATCH 3.12 001/107] SELinux: Fix memory leak upon loading policy

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 8ed814602876bec9bad2649ca17f34b499357a1c upstream.

Hello.

I got below leak with linux-3.10.0-54.0.1.el7.x86_64 .

[  681.903890] kmemleak: 5538 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

Below is a patch, but I don't know whether we need special handing for undoing
ebitmap_set_bit() call.
----------
>>From fe97527a90fe95e2239dfbaa7558f0ed559c0992 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon, 6 Jan 2014 16:30:21 +0900
Subject: [PATCH 3.12 001/107] SELinux: Fix memory leak upon loading policy

Commit 2463c26d "SELinux: put name based create rules in a hashtable" did not
check return value from hashtab_insert() in filename_trans_read(). It leaks
memory if hashtab_insert() returns error.

  unreferenced object 0xffff88005c9160d0 (size 8):
    comm "systemd", pid 1, jiffies 4294688674 (age 235.265s)
    hex dump (first 8 bytes):
      57 0b 00 00 6b 6b 6b a5                          W...kkk.
    backtrace:
      [<ffffffff816604ae>] kmemleak_alloc+0x4e/0xb0
      [<ffffffff811cba5e>] kmem_cache_alloc_trace+0x12e/0x360
      [<ffffffff812aec5d>] policydb_read+0xd1d/0xf70
      [<ffffffff812b345c>] security_load_policy+0x6c/0x500
      [<ffffffff812a623c>] sel_write_load+0xac/0x750
      [<ffffffff811eb680>] vfs_write+0xc0/0x1f0
      [<ffffffff811ec08c>] SyS_write+0x4c/0xa0
      [<ffffffff81690419>] system_call_fastpath+0x16/0x1b
      [<ffffffffffffffff>] 0xffffffffffffffff

However, we should not return EEXIST error to the caller, or the systemd will
show below message and the boot sequence freezes.

  systemd[1]: Failed to load SELinux policy. Freezing.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/selinux/ss/policydb.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -1941,7 +1941,19 @@ static int filename_trans_read(struct po
 		if (rc)
 			goto out;
 
-		hashtab_insert(p->filename_trans, ft, otype);
+		rc = hashtab_insert(p->filename_trans, ft, otype);
+		if (rc) {
+			/*
+			 * Do not return -EEXIST to the caller, or the system
+			 * will not boot.
+			 */
+			if (rc != -EEXIST)
+				goto out;
+			/* But free memory to avoid memory leak. */
+			kfree(ft);
+			kfree(name);
+			kfree(otype);
+		}
 	}
 	hash_eval(p->filename_trans, "filenametr");
 	return 0;

[PATCH 3.12 001/107] SELinux: Fix memory leak upon loading policy

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

commit 8ed814602876bec9bad2649ca17f34b499357a1c upstream.

Hello.

I got below leak with linux-3.10.0-54.0.1.el7.x86_64 .

[  681.903890] kmemleak: 5538 new suspected memory leaks (see /sys/kernel/debug/kmemleak)

Below is a patch, but I don't know whether we need special handing for undoing
ebitmap_set_bit() call.
----------
>>>From fe97527a90fe95e2239dfbaa7558f0ed559c0992 Mon Sep 17 00:00:00 2001
From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Date: Mon, 6 Jan 2014 16:30:21 +0900
Subject: [PATCH 3.12 001/107] SELinux: Fix memory leak upon loading policy

Commit 2463c26d "SELinux: put name based create rules in a hashtable" did not
check return value from hashtab_insert() in filename_trans_read(). It leaks
memory if hashtab_insert() returns error.

  unreferenced object 0xffff88005c9160d0 (size 8):
    comm "systemd", pid 1, jiffies 4294688674 (age 235.265s)
    hex dump (first 8 bytes):
      57 0b 00 00 6b 6b 6b a5                          W...kkk.
    backtrace:
      [<ffffffff816604ae>] kmemleak_alloc+0x4e/0xb0
      [<ffffffff811cba5e>] kmem_cache_alloc_trace+0x12e/0x360
      [<ffffffff812aec5d>] policydb_read+0xd1d/0xf70
      [<ffffffff812b345c>] security_load_policy+0x6c/0x500
      [<ffffffff812a623c>] sel_write_load+0xac/0x750
      [<ffffffff811eb680>] vfs_write+0xc0/0x1f0
      [<ffffffff811ec08c>] SyS_write+0x4c/0xa0
      [<ffffffff81690419>] system_call_fastpath+0x16/0x1b
      [<ffffffffffffffff>] 0xffffffffffffffff

However, we should not return EEXIST error to the caller, or the systemd will
show below message and the boot sequence freezes.

  systemd[1]: Failed to load SELinux policy. Freezing.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/selinux/ss/policydb.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

--- a/security/selinux/ss/policydb.c
+++ b/security/selinux/ss/policydb.c
@@ -1941,7 +1941,19 @@ static int filename_trans_read(struct po
 		if (rc)
 			goto out;
 
-		hashtab_insert(p->filename_trans, ft, otype);
+		rc = hashtab_insert(p->filename_trans, ft, otype);
+		if (rc) {
+			/*
+			 * Do not return -EEXIST to the caller, or the system
+			 * will not boot.
+			 */
+			if (rc != -EEXIST)
+				goto out;
+			/* But free memory to avoid memory leak. */
+			kfree(ft);
+			kfree(name);
+			kfree(otype);
+		}
 	}
 	hash_eval(p->filename_trans, "filenametr");
 	return 0;

[PATCH 3.12 002/107] tracing: Have trace buffer point back to trace_array

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit dced341b2d4f06668efaab33f88de5d287c0f45b upstream.

The trace buffer has a descriptor pointer that goes back to the trace
array. But it was never assigned. Luckily, nothing uses it (yet), but
it will in the future.

Although nothing currently uses this, if any of the new features get
backported to older kernels, and because this is such a simple change,
I'm marking it for stable too.

Fixes: 12883efb670c "tracing: Consolidate max_tr into main trace_array structure"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -5872,6 +5872,8 @@ allocate_trace_buffer(struct trace_array
 
 	rb_flags = trace_flags & TRACE_ITER_OVERWRITE ? RB_FL_OVERWRITE : 0;
 
+	buf->tr = tr;
+
 	buf->buffer = ring_buffer_alloc(size, rb_flags);
 	if (!buf->buffer)
 		return -ENOMEM;

[PATCH 3.12 003/107] tracing: Check if tracing is enabled in trace_puts()

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 3132e107d608f8753240d82d61303c500fd515b4 upstream.

If trace_puts() is used very early in boot up, it can crash the machine
if it is called before the ring buffer is allocated. If a trace_printk()
is used with no arguments, then it will be converted into a trace_puts()
and suffer the same fate.

Fixes: 09ae72348ecc "tracing: Add trace_puts() for even faster trace_printk() tracing"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -435,6 +435,9 @@ int __trace_puts(unsigned long ip, const
 	unsigned long irq_flags;
 	int alloc;
 
+	if (unlikely(tracing_selftest_running || tracing_disabled))
+		return 0;
+
 	alloc = sizeof(*entry) + size + 2; /* possible \n added */
 
 	local_save_flags(irq_flags);
@@ -475,6 +478,9 @@ int __trace_bputs(unsigned long ip, cons
 	unsigned long irq_flags;
 	int size = sizeof(struct bputs_entry);
 
+	if (unlikely(tracing_selftest_running || tracing_disabled))
+		return 0;
+
 	local_save_flags(irq_flags);
 	buffer = global_trace.trace_buffer.buffer;
 	event = trace_buffer_lock_reserve(buffer, TRACE_BPUTS, size,

[PATCH 3.12 004/107] arch/sh/kernel/kgdb.c: add missing #include <linux/sched.h>

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wanlong Gao <gaowanlong@cn.fujitsu.com>

commit 53a52f17d96c8d47c79a7dafa81426317e89c7c1 upstream.

  arch/sh/kernel/kgdb.c: In function 'sleeping_thread_to_gdb_regs':
  arch/sh/kernel/kgdb.c:225:32: error: implicit declaration of function 'task_stack_page' [-Werror=implicit-function-declaration]
  arch/sh/kernel/kgdb.c:242:23: error: dereferencing pointer to incomplete type
  arch/sh/kernel/kgdb.c:243:22: error: dereferencing pointer to incomplete type
  arch/sh/kernel/kgdb.c: In function 'singlestep_trap_handler':
  arch/sh/kernel/kgdb.c:310:27: error: 'SIGTRAP' undeclared (first use in this function)
  arch/sh/kernel/kgdb.c:310:27: note: each undeclared identifier is reported only once for each function it appears in

This was introduced by commit 16559ae48c76 ("kgdb: remove #include
<linux/serial_8250.h> from kgdb.h").

[geert@linux-m68k.org: reworded and reformatted]
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/sh/kernel/kgdb.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/sh/kernel/kgdb.c
+++ b/arch/sh/kernel/kgdb.c
@@ -13,6 +13,7 @@
 #include <linux/kdebug.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/sched.h>
 #include <asm/cacheflush.h>
 #include <asm/traps.h>
 

[PATCH 3.12 005/107] intel-iommu: fix off-by-one in pagetable freeing

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit 08336fd218e087cc4fcc458e6b6dcafe8702b098 upstream.

dma_pte_free_level() has an off-by-one error when checking whether a pte
is completely covered by a range.  Take for example the case of
attempting to free pfn 0x0 - 0x1ff, ie.  512 entries covering the first
2M superpage.

The level_size() is 0x200 and we test:

  static void dma_pte_free_level(...
	...

	if (!(0 > 0 || 0x1ff < 0 + 0x200)) {
		...
	}

Clearly the 2nd test is true, which means we fail to take the branch to
clear and free the pagetable entry.  As a result, we're leaking
pagetables and failing to install new pages over the range.

This was found with a PCI device assigned to a QEMU guest using vfio-pci
without a VGA device present.  The first 1M of guest address space is
mapped with various combinations of 4K pages, but eventually the range
is entirely freed and replaced with a 2M contiguous mapping.
intel-iommu errors out with something like:

  ERROR: DMA PTE for vPFN 0x0 already set (to 5c2b8003 not 849c00083)

In this case 5c2b8003 is the pointer to the previous leaf page that was
neither freed nor cleared and 849c00083 is the superpage entry that
we're trying to replace it with.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -917,7 +917,7 @@ static void dma_pte_free_level(struct dm
 
 		/* If range covers entire pagetable, free it */
 		if (!(start_pfn > level_pfn ||
-		      last_pfn < level_pfn + level_size(level))) {
+		      last_pfn < level_pfn + level_size(level) - 1)) {
 			dma_clear_pte(pte);
 			domain_flush_cache(domain, pte, sizeof(*pte));
 			free_pgtable_page(level_pte);

[PATCH 3.12 006/107] Revert "EISA: Initialize device before its resources"

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjorn Helgaas <bhelgaas@google.com>

commit 765ee51f9a3f652959b4c7297d198a28e37952b4 upstream.

This reverts commit 26abfeed4341872364386c6a52b9acef8c81a81a.

In the eisa_probe() force_probe path, if we were unable to request slot
resources (e.g., [io 0x800-0x8ff]), we skipped the slot with "Cannot
allocate resource for EISA slot %d" before reading the EISA signature in
eisa_init_device().

Commit 26abfeed4341 moved eisa_init_device() earlier, so we tried to read
the EISA signature before requesting the slot resources, and this caused
hangs during boot.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1251816
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/eisa/eisa-bus.c |   26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)

--- a/drivers/eisa/eisa-bus.c
+++ b/drivers/eisa/eisa-bus.c
@@ -275,11 +275,13 @@ static int __init eisa_request_resources
 		}
 		
 		if (slot) {
+			edev->res[i].name  = NULL;
 			edev->res[i].start = SLOT_ADDRESS(root, slot)
 					     + (i * 0x400);
 			edev->res[i].end   = edev->res[i].start + 0xff;
 			edev->res[i].flags = IORESOURCE_IO;
 		} else {
+			edev->res[i].name  = NULL;
 			edev->res[i].start = SLOT_ADDRESS(root, slot)
 					     + EISA_VENDOR_ID_OFFSET;
 			edev->res[i].end   = edev->res[i].start + 3;
@@ -326,19 +328,20 @@ static int __init eisa_probe(struct eisa
 		return -ENOMEM;
 	}
 		
-	if (eisa_init_device(root, edev, 0)) {
+	if (eisa_request_resources(root, edev, 0)) {
+		dev_warn(root->dev,
+		         "EISA: Cannot allocate resource for mainboard\n");
 		kfree(edev);
 		if (!root->force_probe)
-			return -ENODEV;
+			return -EBUSY;
 		goto force_probe;
 	}
 
-	if (eisa_request_resources(root, edev, 0)) {
-		dev_warn(root->dev,
-		         "EISA: Cannot allocate resource for mainboard\n");
+	if (eisa_init_device(root, edev, 0)) {
+		eisa_release_resources(edev);
 		kfree(edev);
 		if (!root->force_probe)
-			return -EBUSY;
+			return -ENODEV;
 		goto force_probe;
 	}
 
@@ -361,11 +364,6 @@ static int __init eisa_probe(struct eisa
 			continue;
 		}
 
-		if (eisa_init_device(root, edev, i)) {
-			kfree(edev);
-			continue;
-		}
-
 		if (eisa_request_resources(root, edev, i)) {
 			dev_warn(root->dev,
 			         "Cannot allocate resource for EISA slot %d\n",
@@ -373,6 +371,12 @@ static int __init eisa_probe(struct eisa
 			kfree(edev);
 			continue;
 		}
+
+		if (eisa_init_device(root, edev, i)) {
+			eisa_release_resources(edev);
+			kfree(edev);
+			continue;
+		}
 
 		if (edev->state == (EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED))
 			enabled_str = " (forced enabled)";

[PATCH 3.12 007/107] fuse: fix pipe_buf_operations

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit 28a625cbc2a14f17b83e47ef907b2658576a32aa upstream.

Having this struct in module memory could Oops when if the module is
unloaded while the buffer still persists in a pipe.

Since sock_pipe_buf_ops is essentially the same as fuse_dev_pipe_buf_steal
merge them into nosteal_pipe_buf_ops (this is the same as
default_pipe_buf_ops except stealing the page from the buffer is not
allowed).

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fuse/dev.c             |   22 +++++-----------------
 fs/splice.c               |   18 ++++++++++++++++++
 include/linux/pipe_fs_i.h |    2 ++
 net/core/skbuff.c         |   32 +-------------------------------
 4 files changed, 26 insertions(+), 48 deletions(-)

--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1296,22 +1296,6 @@ static ssize_t fuse_dev_read(struct kioc
 	return fuse_dev_do_read(fc, file, &cs, iov_length(iov, nr_segs));
 }
 
-static int fuse_dev_pipe_buf_steal(struct pipe_inode_info *pipe,
-				   struct pipe_buffer *buf)
-{
-	return 1;
-}
-
-static const struct pipe_buf_operations fuse_dev_pipe_buf_ops = {
-	.can_merge = 0,
-	.map = generic_pipe_buf_map,
-	.unmap = generic_pipe_buf_unmap,
-	.confirm = generic_pipe_buf_confirm,
-	.release = generic_pipe_buf_release,
-	.steal = fuse_dev_pipe_buf_steal,
-	.get = generic_pipe_buf_get,
-};
-
 static ssize_t fuse_dev_splice_read(struct file *in, loff_t *ppos,
 				    struct pipe_inode_info *pipe,
 				    size_t len, unsigned int flags)
@@ -1358,7 +1342,11 @@ static ssize_t fuse_dev_splice_read(stru
 		buf->page = bufs[page_nr].page;
 		buf->offset = bufs[page_nr].offset;
 		buf->len = bufs[page_nr].len;
-		buf->ops = &fuse_dev_pipe_buf_ops;
+		/*
+		 * Need to be careful about this.  Having buf->ops in module
+		 * code can Oops if the buffer persists after module unload.
+		 */
+		buf->ops = &nosteal_pipe_buf_ops;
 
 		pipe->nrbufs++;
 		page_nr++;
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -555,6 +555,24 @@ static const struct pipe_buf_operations
 	.get = generic_pipe_buf_get,
 };
 
+static int generic_pipe_buf_nosteal(struct pipe_inode_info *pipe,
+				    struct pipe_buffer *buf)
+{
+	return 1;
+}
+
+/* Pipe buffer operations for a socket and similar. */
+const struct pipe_buf_operations nosteal_pipe_buf_ops = {
+	.can_merge = 0,
+	.map = generic_pipe_buf_map,
+	.unmap = generic_pipe_buf_unmap,
+	.confirm = generic_pipe_buf_confirm,
+	.release = generic_pipe_buf_release,
+	.steal = generic_pipe_buf_nosteal,
+	.get = generic_pipe_buf_get,
+};
+EXPORT_SYMBOL(nosteal_pipe_buf_ops);
+
 static ssize_t kernel_readv(struct file *file, const struct iovec *vec,
 			    unsigned long vlen, loff_t offset)
 {
--- a/include/linux/pipe_fs_i.h
+++ b/include/linux/pipe_fs_i.h
@@ -157,6 +157,8 @@ int generic_pipe_buf_confirm(struct pipe
 int generic_pipe_buf_steal(struct pipe_inode_info *, struct pipe_buffer *);
 void generic_pipe_buf_release(struct pipe_inode_info *, struct pipe_buffer *);
 
+extern const struct pipe_buf_operations nosteal_pipe_buf_ops;
+
 /* for F_SETPIPE_SZ and F_GETPIPE_SZ */
 long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
 struct pipe_inode_info *get_pipe_info(struct file *file);
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -74,36 +74,6 @@
 struct kmem_cache *skbuff_head_cache __read_mostly;
 static struct kmem_cache *skbuff_fclone_cache __read_mostly;
 
-static void sock_pipe_buf_release(struct pipe_inode_info *pipe,
-				  struct pipe_buffer *buf)
-{
-	put_page(buf->page);
-}
-
-static void sock_pipe_buf_get(struct pipe_inode_info *pipe,
-				struct pipe_buffer *buf)
-{
-	get_page(buf->page);
-}
-
-static int sock_pipe_buf_steal(struct pipe_inode_info *pipe,
-			       struct pipe_buffer *buf)
-{
-	return 1;
-}
-
-
-/* Pipe buffer operations for a socket. */
-static const struct pipe_buf_operations sock_pipe_buf_ops = {
-	.can_merge = 0,
-	.map = generic_pipe_buf_map,
-	.unmap = generic_pipe_buf_unmap,
-	.confirm = generic_pipe_buf_confirm,
-	.release = sock_pipe_buf_release,
-	.steal = sock_pipe_buf_steal,
-	.get = sock_pipe_buf_get,
-};
-
 /**
  *	skb_panic - private function for out-of-line support
  *	@skb:	buffer
@@ -1800,7 +1770,7 @@ int skb_splice_bits(struct sk_buff *skb,
 		.partial = partial,
 		.nr_pages_max = MAX_SKB_FRAGS,
 		.flags = flags,
-		.ops = &sock_pipe_buf_ops,
+		.ops = &nosteal_pipe_buf_ops,
 		.spd_release = sock_spd_release,
 	};
 	struct sk_buff *frag_iter;

[PATCH 3.12 008/107] audit: reset audit backlog wait time after error recovery

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Guy Briggs <rgb@redhat.com>

commit e789e561a50de0aaa8c695662d97aaa5eac9d55f upstream.

When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero.  Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.

See also:
	https://lkml.org/lkml/2013/9/2/473

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/audit.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -103,7 +103,8 @@ static int	audit_rate_limit;
 
 /* Number of outstanding audit_buffers allowed. */
 static int	audit_backlog_limit = 64;
-static int	audit_backlog_wait_time = 60 * HZ;
+#define AUDIT_BACKLOG_WAIT_TIME (60 * HZ)
+static int	audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
 static int	audit_backlog_wait_overflow = 0;
 
 /* The identity of the user shutting down the audit system. */
@@ -1135,6 +1136,8 @@ struct audit_buffer *audit_log_start(str
 		return NULL;
 	}
 
+	audit_backlog_wait_time = AUDIT_BACKLOG_WAIT_TIME;
+
 	ab = audit_buffer_alloc(ctx, gfp_mask, type);
 	if (!ab) {
 		audit_log_lost("out of memory in audit_log_start");

[PATCH 3.12 009/107] audit: correct a type mismatch in audit_syscall_exit()

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: AKASHI Takahiro <takahiro.akashi@linaro.org>

commit 06bdadd7634551cfe8ce071fe44d0311b3033d9e upstream.

audit_syscall_exit() saves a result of regs_return_value() in intermediate
"int" variable and passes it to __audit_syscall_exit(), which expects its
second argument as a "long" value.  This will result in truncating the
value returned by a system call and making a wrong audit record.

I don't know why gcc compiler doesn't complain about this, but anyway it
causes a problem at runtime on arm64 (and probably most 64-bit archs).

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/audit.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -135,7 +135,7 @@ static inline void audit_syscall_exit(vo
 {
 	if (unlikely(current->audit_context)) {
 		int success = is_syscall_success(pt_regs);
-		int return_code = regs_return_value(pt_regs);
+		long return_code = regs_return_value(pt_regs);
 
 		__audit_syscall_exit(success, return_code);
 	}

[PATCH 3.12 010/107] xen/pvhvm: If xen_platform_pci=0 is set dont blow up (v4).

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 51c71a3bbaca868043cc45b3ad3786dd48a90235 upstream.

The user has the option of disabling the platform driver:
00:02.0 Unassigned class [ff80]: XenSource, Inc. Xen Platform Device (rev 01)

which is used to unplug the emulated drivers (IDE, Realtek 8169, etc)
and allow the PV drivers to take over. If the user wishes
to disable that they can set:

  xen_platform_pci=0
  (in the guest config file)

or
  xen_emul_unplug=never
  (on the Linux command line)

except it does not work properly. The PV drivers still try to
load and since the Xen platform driver is not run - and it
has not initialized the grant tables, most of the PV drivers
stumble upon:

input: Xen Virtual Keyboard as /devices/virtual/input/input5
input: Xen Virtual Pointer as /devices/virtual/input/input6M
------------[ cut here ]------------
kernel BUG at /home/konrad/ssd/konrad/linux/drivers/xen/grant-table.c:1206!
invalid opcode: 0000 [#1] SMP
Modules linked in: xen_kbdfront(+) xenfs xen_privcmd
CPU: 6 PID: 1389 Comm: modprobe Not tainted 3.13.0-rc1upstream-00021-ga6c892b-dirty #1
Hardware name: Xen HVM domU, BIOS 4.4-unstable 11/26/2013
RIP: 0010:[<ffffffff813ddc40>]  [<ffffffff813ddc40>] get_free_entries+0x2e0/0x300
Call Trace:
 [<ffffffff8150d9a3>] ? evdev_connect+0x1e3/0x240
 [<ffffffff813ddd0e>] gnttab_grant_foreign_access+0x2e/0x70
 [<ffffffffa0010081>] xenkbd_connect_backend+0x41/0x290 [xen_kbdfront]
 [<ffffffffa0010a12>] xenkbd_probe+0x2f2/0x324 [xen_kbdfront]
 [<ffffffff813e5757>] xenbus_dev_probe+0x77/0x130
 [<ffffffff813e7217>] xenbus_frontend_dev_probe+0x47/0x50
 [<ffffffff8145e9a9>] driver_probe_device+0x89/0x230
 [<ffffffff8145ebeb>] __driver_attach+0x9b/0xa0
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145eb50>] ? driver_probe_device+0x230/0x230
 [<ffffffff8145cf1c>] bus_for_each_dev+0x8c/0xb0
 [<ffffffff8145e7d9>] driver_attach+0x19/0x20
 [<ffffffff8145e260>] bus_add_driver+0x1a0/0x220
 [<ffffffff8145f1ff>] driver_register+0x5f/0xf0
 [<ffffffff813e55c5>] xenbus_register_driver_common+0x15/0x20
 [<ffffffff813e76b3>] xenbus_register_frontend+0x23/0x40
 [<ffffffffa0015000>] ? 0xffffffffa0014fff
 [<ffffffffa001502b>] xenkbd_init+0x2b/0x1000 [xen_kbdfront]
 [<ffffffff81002049>] do_one_initcall+0x49/0x170

.. snip..

which is hardly nice. This patch fixes this by having each
PV driver check for:
 - if running in PV, then it is fine to execute (as that is their
   native environment).
 - if running in HVM, check if user wanted 'xen_emul_unplug=never',
   in which case bail out and don't load any PV drivers.
 - if running in HVM, and if PCI device 5853:0001 (xen_platform_pci)
   does not exist, then bail out and not load PV drivers.
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=ide-disks',
   then bail out for all PV devices _except_ the block one.
   Ditto for the network one ('nics').
 - (v2) if running in HVM, and if the user wanted 'xen_emul_unplug=unnecessary'
   then load block PV driver, and also setup the legacy IDE paths.
   In (v3) make it actually load PV drivers.

Reported-by: Sander Eikelenboom <linux@eikelenboom.it
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Reported-and-Tested-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Add extra logic to handle the myrid ways 'xen_emul_unplug'
can be used per Ian and Stefano suggestion]
[v3: Make the unnecessary case work properly]
[v4: s/disks/ide-disks/ spotted by Fabio]
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> [for PCI parts]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/platform-pci-unplug.c         |   74 +++++++++++++++++++++++++++++
 drivers/block/xen-blkfront.c               |    4 -
 drivers/char/tpm/xen-tpmfront.c            |    4 +
 drivers/input/misc/xen-kbdfront.c          |    4 +
 drivers/net/xen-netfront.c                 |    2 
 drivers/pci/xen-pcifront.c                 |    4 +
 drivers/video/xen-fbfront.c                |    4 +
 drivers/xen/xenbus/xenbus_probe_frontend.c |    2 
 include/xen/platform_pci.h                 |   23 +++++++++
 9 files changed, 117 insertions(+), 4 deletions(-)

--- a/arch/x86/xen/platform-pci-unplug.c
+++ b/arch/x86/xen/platform-pci-unplug.c
@@ -69,6 +69,80 @@ static int check_platform_magic(void)
 	return 0;
 }
 
+bool xen_has_pv_devices()
+{
+	if (!xen_domain())
+		return false;
+
+	/* PV domains always have them. */
+	if (xen_pv_domain())
+		return true;
+
+	/* And user has xen_platform_pci=0 set in guest config as
+	 * driver did not modify the value. */
+	if (xen_platform_pci_unplug == 0)
+		return false;
+
+	if (xen_platform_pci_unplug & XEN_UNPLUG_NEVER)
+		return false;
+
+	if (xen_platform_pci_unplug & XEN_UNPLUG_ALL)
+		return true;
+
+	/* This is an odd one - we are going to run legacy
+	 * and PV drivers at the same time. */
+	if (xen_platform_pci_unplug & XEN_UNPLUG_UNNECESSARY)
+		return true;
+
+	/* And the caller has to follow with xen_pv_{disk,nic}_devices
+	 * to be certain which driver can load. */
+	return false;
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_devices);
+
+static bool __xen_has_pv_device(int state)
+{
+	/* HVM domains might or might not */
+	if (xen_hvm_domain() && (xen_platform_pci_unplug & state))
+		return true;
+
+	return xen_has_pv_devices();
+}
+
+bool xen_has_pv_nic_devices(void)
+{
+	return __xen_has_pv_device(XEN_UNPLUG_ALL_NICS | XEN_UNPLUG_ALL);
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_nic_devices);
+
+bool xen_has_pv_disk_devices(void)
+{
+	return __xen_has_pv_device(XEN_UNPLUG_ALL_IDE_DISKS |
+				   XEN_UNPLUG_AUX_IDE_DISKS | XEN_UNPLUG_ALL);
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_disk_devices);
+
+/*
+ * This one is odd - it determines whether you want to run PV _and_
+ * legacy (IDE) drivers together. This combination is only possible
+ * under HVM.
+ */
+bool xen_has_pv_and_legacy_disk_devices(void)
+{
+	if (!xen_domain())
+		return false;
+
+	/* N.B. This is only ever used in HVM mode */
+	if (xen_pv_domain())
+		return false;
+
+	if (xen_platform_pci_unplug & XEN_UNPLUG_UNNECESSARY)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(xen_has_pv_and_legacy_disk_devices);
+
 void xen_unplug_emulated_devices(void)
 {
 	int r;
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -1278,7 +1278,7 @@ static int blkfront_probe(struct xenbus_
 		char *type;
 		int len;
 		/* no unplug has been done: do not hook devices != xen vbds */
-		if (xen_platform_pci_unplug & XEN_UNPLUG_UNNECESSARY) {
+		if (xen_has_pv_and_legacy_disk_devices()) {
 			int major;
 
 			if (!VDEV_IS_EXTENDED(vdevice))
@@ -2022,7 +2022,7 @@ static int __init xlblk_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	if (xen_hvm_domain() && !xen_platform_pci_unplug)
+	if (!xen_has_pv_disk_devices())
 		return -ENODEV;
 
 	if (register_blkdev(XENVBD_MAJOR, DEV_NAME)) {
--- a/drivers/char/tpm/xen-tpmfront.c
+++ b/drivers/char/tpm/xen-tpmfront.c
@@ -17,6 +17,7 @@
 #include <xen/xenbus.h>
 #include <xen/page.h>
 #include "tpm.h"
+#include <xen/platform_pci.h>
 
 struct tpm_private {
 	struct tpm_chip *chip;
@@ -423,6 +424,9 @@ static int __init xen_tpmfront_init(void
 	if (!xen_domain())
 		return -ENODEV;
 
+	if (!xen_has_pv_devices())
+		return -ENODEV;
+
 	return xenbus_register_frontend(&tpmfront_driver);
 }
 module_init(xen_tpmfront_init);
--- a/drivers/input/misc/xen-kbdfront.c
+++ b/drivers/input/misc/xen-kbdfront.c
@@ -29,6 +29,7 @@
 #include <xen/interface/io/fbif.h>
 #include <xen/interface/io/kbdif.h>
 #include <xen/xenbus.h>
+#include <xen/platform_pci.h>
 
 struct xenkbd_info {
 	struct input_dev *kbd;
@@ -380,6 +381,9 @@ static int __init xenkbd_init(void)
 	if (xen_initial_domain())
 		return -ENODEV;
 
+	if (!xen_has_pv_devices())
+		return -ENODEV;
+
 	return xenbus_register_frontend(&xenkbd_driver);
 }
 
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -2070,7 +2070,7 @@ static int __init netif_init(void)
 	if (!xen_domain())
 		return -ENODEV;
 
-	if (xen_hvm_domain() && !xen_platform_pci_unplug)
+	if (!xen_has_pv_nic_devices())
 		return -ENODEV;
 
 	pr_info("Initialising Xen virtual ethernet driver\n");
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -20,6 +20,7 @@
 #include <linux/workqueue.h>
 #include <linux/bitops.h>
 #include <linux/time.h>
+#include <xen/platform_pci.h>
 
 #include <asm/xen/swiotlb-xen.h>
 #define INVALID_GRANT_REF (0)
@@ -1138,6 +1139,9 @@ static int __init pcifront_init(void)
 	if (!xen_pv_domain() || xen_initial_domain())
 		return -ENODEV;
 
+	if (!xen_has_pv_devices())
+		return -ENODEV;
+
 	pci_frontend_registrar(1 /* enable */);
 
 	return xenbus_register_frontend(&xenpci_driver);
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/xen-fbfront.c
@@ -35,6 +35,7 @@
 #include <xen/interface/io/fbif.h>
 #include <xen/interface/io/protocols.h>
 #include <xen/xenbus.h>
+#include <xen/platform_pci.h>
 
 struct xenfb_info {
 	unsigned char		*fb;
@@ -699,6 +700,9 @@ static int __init xenfb_init(void)
 	if (xen_initial_domain())
 		return -ENODEV;
 
+	if (!xen_has_pv_devices())
+		return -ENODEV;
+
 	return xenbus_register_frontend(&xenfb_driver);
 }
 
--- a/drivers/xen/xenbus/xenbus_probe_frontend.c
+++ b/drivers/xen/xenbus/xenbus_probe_frontend.c
@@ -496,7 +496,7 @@ subsys_initcall(xenbus_probe_frontend_in
 #ifndef MODULE
 static int __init boot_wait_for_devices(void)
 {
-	if (xen_hvm_domain() && !xen_platform_pci_unplug)
+	if (!xen_has_pv_devices())
 		return -ENODEV;
 
 	ready_to_wait_for_devices = 1;
--- a/include/xen/platform_pci.h
+++ b/include/xen/platform_pci.h
@@ -48,4 +48,27 @@ static inline int xen_must_unplug_disks(
 
 extern int xen_platform_pci_unplug;
 
+#if defined(CONFIG_XEN_PVHVM)
+extern bool xen_has_pv_devices(void);
+extern bool xen_has_pv_disk_devices(void);
+extern bool xen_has_pv_nic_devices(void);
+extern bool xen_has_pv_and_legacy_disk_devices(void);
+#else
+static inline bool xen_has_pv_devices(void)
+{
+	return IS_ENABLED(CONFIG_XEN);
+}
+static inline bool xen_has_pv_disk_devices(void)
+{
+	return IS_ENABLED(CONFIG_XEN);
+}
+static inline bool xen_has_pv_nic_devices(void)
+{
+	return IS_ENABLED(CONFIG_XEN);
+}
+static inline bool xen_has_pv_and_legacy_disk_devices(void)
+{
+	return false;
+}
+#endif
 #endif /* _XEN_PLATFORM_PCI_H */

[PATCH 3.12 011/107] mm/memory-failure.c: shift page lock from head page to tail page after thp split

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>

commit 54b9dd14d09f24927285359a227aa363ce46089e upstream.

After thp split in hwpoison_user_mappings(), we hold page lock on the
raw error page only between try_to_unmap, hence we are in danger of race
condition.

I found in the RHEL7 MCE-relay testing that we have "bad page" error
when a memory error happens on a thp tail page used by qemu-kvm:

  Triggering MCE exception on CPU 10
  mce: [Hardware Error]: Machine check events logged
  MCE exception done on CPU 10
  MCE 0x38c535: Killing qemu-kvm:8418 due to hardware memory corruption
  MCE 0x38c535: dirty LRU page recovery: Recovered
  qemu-kvm[8418]: segfault at 20 ip 00007ffb0f0f229a sp 00007fffd6bc5240 error 4 in qemu-kvm[7ffb0ef14000+420000]
  BUG: Bad page state in process qemu-kvm  pfn:38c400
  page:ffffea000e310000 count:0 mapcount:0 mapping:          (null) index:0x7ffae3c00
  page flags: 0x2fffff0008001d(locked|referenced|uptodate|dirty|swapbacked)
  Modules linked in: hwpoison_inject mce_inject vhost_net macvtap macvlan ...
  CPU: 0 PID: 8418 Comm: qemu-kvm Tainted: G   M        --------------   3.10.0-54.0.1.el7.mce_test_fixed.x86_64 #1
  Hardware name: NEC NEC Express5800/R120b-1 [N8100-1719F]/MS-91E7-001, BIOS 4.6.3C19 02/10/2011
  Call Trace:
    dump_stack+0x19/0x1b
    bad_page.part.59+0xcf/0xe8
    free_pages_prepare+0x148/0x160
    free_hot_cold_page+0x31/0x140
    free_hot_cold_page_list+0x46/0xa0
    release_pages+0x1c1/0x200
    free_pages_and_swap_cache+0xad/0xd0
    tlb_flush_mmu.part.46+0x4c/0x90
    tlb_finish_mmu+0x55/0x60
    exit_mmap+0xcb/0x170
    mmput+0x67/0xf0
    vhost_dev_cleanup+0x231/0x260 [vhost_net]
    vhost_net_release+0x3f/0x90 [vhost_net]
    __fput+0xe9/0x270
    ____fput+0xe/0x10
    task_work_run+0xc4/0xe0
    do_exit+0x2bb/0xa40
    do_group_exit+0x3f/0xa0
    get_signal_to_deliver+0x1d0/0x6e0
    do_signal+0x48/0x5e0
    do_notify_resume+0x71/0xc0
    retint_signal+0x48/0x8c

The reason of this bug is that a page fault happens before unlocking the
head page at the end of memory_failure().  This strange page fault is
trying to access to address 0x20 and I'm not sure why qemu-kvm does
this, but anyway as a result the SIGSEGV makes qemu-kvm exit and on the
way we catch the bad page bug/warning because we try to free a locked
page (which was the former head page.)

To fix this, this patch suggests to shift page lock from head page to
tail page just after thp split.  SIGSEGV still happens, but it affects
only error affected VMs, not a whole system.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memory-failure.c |   21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

--- a/mm/memory-failure.c
+++ b/mm/memory-failure.c
@@ -856,14 +856,14 @@ static int page_action(struct page_state
  * the pages and send SIGBUS to the processes if the data was dirty.
  */
 static int hwpoison_user_mappings(struct page *p, unsigned long pfn,
-				  int trapno, int flags)
+				  int trapno, int flags, struct page **hpagep)
 {
 	enum ttu_flags ttu = TTU_UNMAP | TTU_IGNORE_MLOCK | TTU_IGNORE_ACCESS;
 	struct address_space *mapping;
 	LIST_HEAD(tokill);
 	int ret;
 	int kill = 1, forcekill;
-	struct page *hpage = compound_head(p);
+	struct page *hpage = *hpagep;
 	struct page *ppage;
 
 	if (PageReserved(p) || PageSlab(p))
@@ -942,11 +942,14 @@ static int hwpoison_user_mappings(struct
 			 * We pinned the head page for hwpoison handling,
 			 * now we split the thp and we are interested in
 			 * the hwpoisoned raw page, so move the refcount
-			 * to it.
+			 * to it. Similarly, page lock is shifted.
 			 */
 			if (hpage != p) {
 				put_page(hpage);
 				get_page(p);
+				lock_page(p);
+				unlock_page(hpage);
+				*hpagep = p;
 			}
 			/* THP is split, so ppage should be the real poisoned page. */
 			ppage = p;
@@ -964,17 +967,11 @@ static int hwpoison_user_mappings(struct
 	if (kill)
 		collect_procs(ppage, &tokill);
 
-	if (hpage != ppage)
-		lock_page(ppage);
-
 	ret = try_to_unmap(ppage, ttu);
 	if (ret != SWAP_SUCCESS)
 		printk(KERN_ERR "MCE %#lx: failed to unmap page (mapcount=%d)\n",
 				pfn, page_mapcount(ppage));
 
-	if (hpage != ppage)
-		unlock_page(ppage);
-
 	/*
 	 * Now that the dirty bit has been propagated to the
 	 * struct page and all unmaps done we can decide if
@@ -1193,8 +1190,12 @@ int memory_failure(unsigned long pfn, in
 	/*
 	 * Now take care of user space mappings.
 	 * Abort on fail: __delete_from_page_cache() assumes unmapped page.
+	 *
+	 * When the raw error page is thp tail page, hpage points to the raw
+	 * page after thp split.
 	 */
-	if (hwpoison_user_mappings(p, pfn, trapno, flags) != SWAP_SUCCESS) {
+	if (hwpoison_user_mappings(p, pfn, trapno, flags, &hpage)
+	    != SWAP_SUCCESS) {
 		printk(KERN_ERR "MCE %#lx: cannot unmap page, give up\n", pfn);
 		res = -EBUSY;
 		goto out;

[PATCH 3.12 012/107] mm/memcg: iteration skip memcgs not yet fully initialized

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit d8ad30559715ce97afb7d1a93a12fd90e8fff312 upstream.

It is surprising that the mem_cgroup iterator can return memcgs which
have not yet been fully initialized.  By accident (or trial and error?)
this appears not to present an actual problem; but it may be better to
prevent such surprises, by skipping memcgs not yet online.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memcontrol.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1081,10 +1081,8 @@ skip_node:
 	 * protected by css_get and the tree walk is rcu safe.
 	 */
 	if (next_css) {
-		struct mem_cgroup *mem = mem_cgroup_from_css(next_css);
-
-		if (css_tryget(&mem->css))
-			return mem;
+		if ((next_css->flags & CSS_ONLINE) && css_tryget(next_css))
+			return mem_cgroup_from_css(next_css);
 		else {
 			prev_css = next_css;
 			goto skip_node;

[PATCH 3.12 013/107] mm/page-writeback.c: fix dirty_balance_reserve subtraction from dirtyable memory

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Weiner <hannes@cmpxchg.org>

commit a804552b9a15c931cfc2a92a2e0aed1add8b580a upstream.

Tejun reported stuttering and latency spikes on a system where random
tasks would enter direct reclaim and get stuck on dirty pages.  Around
50% of memory was occupied by tmpfs backed by an SSD, and another disk
(rotating) was reading and writing at max speed to shrink a partition.

: The problem was pretty ridiculous.  It's a 8gig machine w/ one ssd and 10k
: rpm harddrive and I could reliably reproduce constant stuttering every
: several seconds for as long as buffered IO was going on on the hard drive
: either with tmpfs occupying somewhere above 4gig or a test program which
: allocates about the same amount of anon memory.  Although swap usage was
: zero, turning off swap also made the problem go away too.
:
: The trigger conditions seem quite plausible - high anon memory usage w/
: heavy buffered IO and swap configured - and it's highly likely that this
: is happening in the wild too.  (this can happen with copying large files
: to usb sticks too, right?)

This patch (of 2):

The dirty_balance_reserve is an approximation of the fraction of free
pages that the page allocator does not make available for page cache
allocations.  As a result, it has to be taken into account when
calculating the amount of "dirtyable memory", the baseline to which
dirty_background_ratio and dirty_ratio are applied.

However, currently the reserve is subtracted from the sum of free and
reclaimable pages, which is non-sensical and leads to erroneous results
when the system is dominated by unreclaimable pages and the
dirty_balance_reserve is bigger than free+reclaimable.  In that case, at
least the already allocated cache should be considered dirtyable.

Fix the calculation by subtracting the reserve from the amount of free
pages, then adding the reclaimable pages on top.

[akpm@linux-foundation.org: fix CONFIG_HIGHMEM build]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Tested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/page-writeback.c |   55 ++++++++++++++++++++++------------------------------
 1 file changed, 24 insertions(+), 31 deletions(-)

--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -191,6 +191,25 @@ static unsigned long writeout_period_tim
  * global dirtyable memory first.
  */
 
+/**
+ * zone_dirtyable_memory - number of dirtyable pages in a zone
+ * @zone: the zone
+ *
+ * Returns the zone's number of pages potentially available for dirty
+ * page cache.  This is the base value for the per-zone dirty limits.
+ */
+static unsigned long zone_dirtyable_memory(struct zone *zone)
+{
+	unsigned long nr_pages;
+
+	nr_pages = zone_page_state(zone, NR_FREE_PAGES);
+	nr_pages -= min(nr_pages, zone->dirty_balance_reserve);
+
+	nr_pages += zone_reclaimable_pages(zone);
+
+	return nr_pages;
+}
+
 static unsigned long highmem_dirtyable_memory(unsigned long total)
 {
 #ifdef CONFIG_HIGHMEM
@@ -198,11 +217,9 @@ static unsigned long highmem_dirtyable_m
 	unsigned long x = 0;
 
 	for_each_node_state(node, N_HIGH_MEMORY) {
-		struct zone *z =
-			&NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
+		struct zone *z = &NODE_DATA(node)->node_zones[ZONE_HIGHMEM];
 
-		x += zone_page_state(z, NR_FREE_PAGES) +
-		     zone_reclaimable_pages(z) - z->dirty_balance_reserve;
+		x += zone_dirtyable_memory(z);
 	}
 	/*
 	 * Unreclaimable memory (kernel memory or anonymous memory
@@ -238,9 +255,11 @@ static unsigned long global_dirtyable_me
 {
 	unsigned long x;
 
-	x = global_page_state(NR_FREE_PAGES) + global_reclaimable_pages();
+	x = global_page_state(NR_FREE_PAGES);
 	x -= min(x, dirty_balance_reserve);
 
+	x += global_reclaimable_pages();
+
 	if (!vm_highmem_is_dirtyable)
 		x -= highmem_dirtyable_memory(x);
 
@@ -289,32 +308,6 @@ void global_dirty_limits(unsigned long *
 }
 
 /**
- * zone_dirtyable_memory - number of dirtyable pages in a zone
- * @zone: the zone
- *
- * Returns the zone's number of pages potentially available for dirty
- * page cache.  This is the base value for the per-zone dirty limits.
- */
-static unsigned long zone_dirtyable_memory(struct zone *zone)
-{
-	/*
-	 * The effective global number of dirtyable pages may exclude
-	 * highmem as a big-picture measure to keep the ratio between
-	 * dirty memory and lowmem reasonable.
-	 *
-	 * But this function is purely about the individual zone and a
-	 * highmem zone can hold its share of dirty pages, so we don't
-	 * care about vm_highmem_is_dirtyable here.
-	 */
-	unsigned long nr_pages = zone_page_state(zone, NR_FREE_PAGES) +
-		zone_reclaimable_pages(zone);
-
-	/* don't allow this to underflow */
-	nr_pages -= min(nr_pages, zone->dirty_balance_reserve);
-	return nr_pages;
-}
-
-/**
  * zone_dirty_limit - maximum number of dirty pages allowed in a zone
  * @zone: the zone
  *

[PATCH 3.12 014/107] mm/page-writeback.c: do not count anon pages as dirtyable memory

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johannes Weiner <hannes@cmpxchg.org>

commit a1c3bfb2f67ef766de03f1f56bdfff9c8595ab14 upstream.

The VM is currently heavily tuned to avoid swapping.  Whether that is
good or bad is a separate discussion, but as long as the VM won't swap
to make room for dirty cache, we can not consider anonymous pages when
calculating the amount of dirtyable memory, the baseline to which
dirty_background_ratio and dirty_ratio are applied.

A simple workload that occupies a significant size (40+%, depending on
memory layout, storage speeds etc.) of memory with anon/tmpfs pages and
uses the remainder for a streaming writer demonstrates this problem.  In
that case, the actual cache pages are a small fraction of what is
considered dirtyable overall, which results in an relatively large
portion of the cache pages to be dirtied.  As kswapd starts rotating
these, random tasks enter direct reclaim and stall on IO.

Only consider free pages and file pages dirtyable.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Tested-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/vmstat.h |    2 --
 mm/internal.h          |    1 -
 mm/page-writeback.c    |    6 ++++--
 mm/vmscan.c            |   23 +----------------------
 4 files changed, 5 insertions(+), 27 deletions(-)

--- a/include/linux/vmstat.h
+++ b/include/linux/vmstat.h
@@ -142,8 +142,6 @@ static inline unsigned long zone_page_st
 	return x;
 }
 
-extern unsigned long global_reclaimable_pages(void);
-
 #ifdef CONFIG_NUMA
 /*
  * Determine the per node value of a stat item. This function
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -85,7 +85,6 @@ extern unsigned long highest_memmap_pfn;
  */
 extern int isolate_lru_page(struct page *page);
 extern void putback_lru_page(struct page *page);
-extern unsigned long zone_reclaimable_pages(struct zone *zone);
 extern bool zone_reclaimable(struct zone *zone);
 
 /*
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -205,7 +205,8 @@ static unsigned long zone_dirtyable_memo
 	nr_pages = zone_page_state(zone, NR_FREE_PAGES);
 	nr_pages -= min(nr_pages, zone->dirty_balance_reserve);
 
-	nr_pages += zone_reclaimable_pages(zone);
+	nr_pages += zone_page_state(zone, NR_INACTIVE_FILE);
+	nr_pages += zone_page_state(zone, NR_ACTIVE_FILE);
 
 	return nr_pages;
 }
@@ -258,7 +259,8 @@ static unsigned long global_dirtyable_me
 	x = global_page_state(NR_FREE_PAGES);
 	x -= min(x, dirty_balance_reserve);
 
-	x += global_reclaimable_pages();
+	x += global_page_state(NR_INACTIVE_FILE);
+	x += global_page_state(NR_ACTIVE_FILE);
 
 	if (!vm_highmem_is_dirtyable)
 		x -= highmem_dirtyable_memory(x);
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -147,7 +147,7 @@ static bool global_reclaim(struct scan_c
 }
 #endif
 
-unsigned long zone_reclaimable_pages(struct zone *zone)
+static unsigned long zone_reclaimable_pages(struct zone *zone)
 {
 	int nr;
 
@@ -3297,27 +3297,6 @@ void wakeup_kswapd(struct zone *zone, in
 	wake_up_interruptible(&pgdat->kswapd_wait);
 }
 
-/*
- * The reclaimable count would be mostly accurate.
- * The less reclaimable pages may be
- * - mlocked pages, which will be moved to unevictable list when encountered
- * - mapped pages, which may require several travels to be reclaimed
- * - dirty pages, which is not "instantly" reclaimable
- */
-unsigned long global_reclaimable_pages(void)
-{
-	int nr;
-
-	nr = global_page_state(NR_ACTIVE_FILE) +
-	     global_page_state(NR_INACTIVE_FILE);
-
-	if (get_nr_swap_pages() > 0)
-		nr += global_page_state(NR_ACTIVE_ANON) +
-		      global_page_state(NR_INACTIVE_ANON);
-
-	return nr;
-}
-
 #ifdef CONFIG_HIBERNATION
 /*
  * Try to free `nr_to_reclaim' of memory, system-wide, and return the number of

[PATCH 3.12 015/107] memcg: fix endless loop caused by mem_cgroup_iter

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.cz>

commit ecc736fc3c71c411a9d201d8588c9e7e049e5d8c upstream.

Hugh has reported an endless loop when the hardlimit reclaim sees the
same group all the time.  This might happen when the reclaim races with
the memcg removal.

shrink_zone
                                                [rmdir root]
  mem_cgroup_iter(root, NULL, reclaim)
    // prev = NULL
    rcu_read_lock()
    mem_cgroup_iter_load
      last_visited = iter->last_visited   // gets root || NULL
      css_tryget(last_visited)            // failed
      last_visited = NULL                 [1]
    memcg = root = __mem_cgroup_iter_next(root, NULL)
    mem_cgroup_iter_update
      iter->last_visited = root;
    reclaim->generation = iter->generation

 mem_cgroup_iter(root, root, reclaim)
   // prev = root
   rcu_read_lock
    mem_cgroup_iter_load
      last_visited = iter->last_visited   // gets root
      css_tryget(last_visited)            // failed
    [1]

The issue seemed to be introduced by commit 5f5781619718 ("memcg: relax
memcg iter caching") which has replaced unconditional css_get/css_put by
css_tryget/css_put for the cached iterator.

This patch fixes the issue by skipping css_tryget on the root of the
tree walk in mem_cgroup_iter_load and symmetrically doesn't release it
in mem_cgroup_iter_update.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Hugh Dickins <hughd@google.com>
Tested-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memcontrol.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1120,7 +1120,15 @@ mem_cgroup_iter_load(struct mem_cgroup_r
 	if (iter->last_dead_count == *sequence) {
 		smp_rmb();
 		position = iter->last_visited;
-		if (position && !css_tryget(&position->css))
+
+		/*
+		 * We cannot take a reference to root because we might race
+		 * with root removal and returning NULL would end up in
+		 * an endless loop on the iterator user level when root
+		 * would be returned all the time.
+		 */
+		if (position && position != root &&
+				!css_tryget(&position->css))
 			position = NULL;
 	}
 	return position;
@@ -1129,9 +1137,11 @@ mem_cgroup_iter_load(struct mem_cgroup_r
 static void mem_cgroup_iter_update(struct mem_cgroup_reclaim_iter *iter,
 				   struct mem_cgroup *last_visited,
 				   struct mem_cgroup *new_position,
+				   struct mem_cgroup *root,
 				   int sequence)
 {
-	if (last_visited)
+	/* root reference counting symmetric to mem_cgroup_iter_load */
+	if (last_visited && last_visited != root)
 		css_put(&last_visited->css);
 	/*
 	 * We store the sequence count from the time @last_visited was
@@ -1206,7 +1216,8 @@ struct mem_cgroup *mem_cgroup_iter(struc
 		memcg = __mem_cgroup_iter_next(root, last_visited);
 
 		if (reclaim) {
-			mem_cgroup_iter_update(iter, last_visited, memcg, seq);
+			mem_cgroup_iter_update(iter, last_visited, memcg, root,
+					seq);
 
 			if (!memcg)
 				iter->generation++;

[PATCH 3.12 016/107] memcg: fix css reference leak and endless loop in mem_cgroup_iter

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.cz>

commit 0eef615665ede1e0d603ea9ecca88c1da6f02234 upstream.

Commit 19f39402864e ("memcg: simplify mem_cgroup_iter") has reorganized
mem_cgroup_iter code in order to simplify it.  A part of that change was
dropping an optimization which didn't call css_tryget on the root of the
walked tree.  The patch however didn't change the css_put part in
mem_cgroup_iter which excludes root.

This wasn't an issue at the time because __mem_cgroup_iter_next bailed
out for root early without taking a reference as cgroup iterators
(css_next_descendant_pre) didn't visit root themselves.

Nevertheless cgroup iterators have been reworked to visit root by commit
bd8815a6d802 ("cgroup: make css_for_each_descendant() and friends
include the origin css in the iteration") when the root bypass have been
dropped in __mem_cgroup_iter_next.  This means that css_put is not
called for root and so css along with mem_cgroup and other cgroup
internal object tied by css lifetime are never freed.

Fix the issue by reintroducing root check in __mem_cgroup_iter_next and
do not take css reference for it.

This reference counting magic protects us also from another issue, an
endless loop reported by Hugh Dickins when reclaim races with root
removal and css_tryget called by iterator internally would fail.  There
would be no other nodes to visit so __mem_cgroup_iter_next would return
NULL and mem_cgroup_iter would interpret it as "start looping from root
again" and so mem_cgroup_iter would loop forever internally.

Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reported-by: Hugh Dickins <hughd@google.com>
Tested-by: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memcontrol.c |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1079,14 +1079,22 @@ skip_node:
 	 * skipped and we should continue the tree walk.
 	 * last_visited css is safe to use because it is
 	 * protected by css_get and the tree walk is rcu safe.
+	 *
+	 * We do not take a reference on the root of the tree walk
+	 * because we might race with the root removal when it would
+	 * be the only node in the iterated hierarchy and mem_cgroup_iter
+	 * would end up in an endless loop because it expects that at
+	 * least one valid node will be returned. Root cannot disappear
+	 * because caller of the iterator should hold it already so
+	 * skipping css reference should be safe.
 	 */
 	if (next_css) {
-		if ((next_css->flags & CSS_ONLINE) && css_tryget(next_css))
+		if ((next_css->flags & CSS_ONLINE) &&
+				(next_css == &root->css || css_tryget(next_css)))
 			return mem_cgroup_from_css(next_css);
-		else {
-			prev_css = next_css;
-			goto skip_node;
-		}
+
+		prev_css = next_css;
+		goto skip_node;
 	}
 
 	return NULL;

[PATCH 3.12 017/107] mm: ignore VM_SOFTDIRTY on VMA merging

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Cyrill Gorcunov <gorcunov@gmail.com>

commit 34228d473efe764d4db7c0536375f0c993e6e06a upstream.

The VM_SOFTDIRTY bit affects vma merge routine: if two VMAs has all bits
in vm_flags matched except dirty bit the kernel can't longer merge them
and this forces the kernel to generate new VMAs instead.

It finally may lead to the situation when userspace application reaches
vm.max_map_count limit and get crashed in worse case

 | (gimp:11768): GLib-ERROR **: gmem.c:110: failed to allocate 4096 bytes
 |
 | (file-tiff-load:12038): LibGimpBase-WARNING **: file-tiff-load: gimp_wire_read(): error
 | xinit: connection to X server lost
 |
 | waiting for X server to shut down
 | /usr/lib64/gimp/2.0/plug-ins/file-tiff-load terminated: Hangup
 | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup
 | /usr/lib64/gimp/2.0/plug-ins/script-fu terminated: Hangup

  https://bugzilla.kernel.org/show_bug.cgi?id=67651
  https://bugzilla.gnome.org/show_bug.cgi?id=719619#c0

Initial problem came from missed VM_SOFTDIRTY in do_brk() routine but
even if we would set up VM_SOFTDIRTY here, there is still a way to
prevent VMAs from merging: one can call

 | echo 4 > /proc/$PID/clear_refs

and clear all VM_SOFTDIRTY over all VMAs presented in memory map, then
new do_brk() will try to extend old VMA and finds that dirty bit doesn't
match thus new VMA will be generated.

As discussed with Pavel, the right approach should be to ignore
VM_SOFTDIRTY bit when we're trying to merge VMAs and if merge successed
we mark extended VMA with dirty bit where needed.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reported-by: Bastian Hougaard <gnome@rvzt.net>
Reported-by: Mel Gorman <mgorman@suse.de>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/mmap.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -895,7 +895,15 @@ again:			remove_next = 1 + (end > next->
 static inline int is_mergeable_vma(struct vm_area_struct *vma,
 			struct file *file, unsigned long vm_flags)
 {
-	if (vma->vm_flags ^ vm_flags)
+	/*
+	 * VM_SOFTDIRTY should not prevent from VMA merging, if we
+	 * match the flags but dirty bit -- the caller should mark
+	 * merged VMA as dirty. If dirty bit won't be excluded from
+	 * comparison, we increase pressue on the memory system forcing
+	 * the kernel to generate new VMAs when old one could be
+	 * extended instead.
+	 */
+	if ((vma->vm_flags ^ vm_flags) & ~VM_SOFTDIRTY)
 		return 0;
 	if (vma->vm_file != file)
 		return 0;
@@ -1084,7 +1092,7 @@ static int anon_vma_compatible(struct vm
 	return a->vm_end == b->vm_start &&
 		mpol_equal(vma_policy(a), vma_policy(b)) &&
 		a->vm_file == b->vm_file &&
-		!((a->vm_flags ^ b->vm_flags) & ~(VM_READ|VM_WRITE|VM_EXEC)) &&
+		!((a->vm_flags ^ b->vm_flags) & ~(VM_READ|VM_WRITE|VM_EXEC|VM_SOFTDIRTY)) &&
 		b->vm_pgoff == a->vm_pgoff + ((b->vm_start - a->vm_start) >> PAGE_SHIFT);
 }
 

[PATCH 3.12 018/107] mm: dont lose the SOFT_DIRTY flag on mprotect

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrey Vagin <avagin@openvz.org>

commit 24f91eba18bbfdb27e71a1aae5b3a61b67fcd091 upstream.

The SOFT_DIRTY bit shows that the content of memory was changed after a
defined point in the past.  mprotect() doesn't change the content of
memory, so it must not change the SOFT_DIRTY bit.

This bug causes a malfunction: on the first iteration all pages are
dumped.  On other iterations only pages with the SOFT_DIRTY bit are
dumped.  So if the SOFT_DIRTY bit is cleared from a page by mistake, the
page is not dumped and its content will be restored incorrectly.

This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify()
is called only for present pages.

Fixes commit 0f8975ec4db2 ("mm: soft-dirty bits for user memory changes
tracking").

Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/pgtable_types.h |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -121,7 +121,8 @@
 
 /* Set of bits not changed in pte_modify */
 #define _PAGE_CHG_MASK	(PTE_PFN_MASK | _PAGE_PCD | _PAGE_PWT |		\
-			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY)
+			 _PAGE_SPECIAL | _PAGE_ACCESSED | _PAGE_DIRTY |	\
+			 _PAGE_SOFT_DIRTY)
 #define _HPAGE_CHG_MASK (_PAGE_CHG_MASK | _PAGE_PSE)
 
 #define _PAGE_CACHE_MASK	(_PAGE_PCD | _PAGE_PWT)

[PATCH 3.12 019/107] mmc: fix host release issue after discard operation

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ray Jui <rjui@broadcom.com>

commit f662ae48ae67dfd42739e65750274fe8de46240a upstream.

Under function mmc_blk_issue_rq, after an MMC discard operation,
the MMC request data structure may be freed in memory. Later in
the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK
is dangerous and invalid. It causes the MMC host not to be released
when it should.

This patch fixes the issue by marking the special request down before
the discard/flush operation.

Reported by: Harold (SoonYeal) Yang <haroldsy@broadcom.com>
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Seungwon Jeon <tgih.jun@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/card/block.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1959,6 +1959,7 @@ static int mmc_blk_issue_rq(struct mmc_q
 	struct mmc_card *card = md->queue.card;
 	struct mmc_host *host = card->host;
 	unsigned long flags;
+	unsigned int cmd_flags = req ? req->cmd_flags : 0;
 
 	if (req && !mq->mqrq_prev->req)
 		/* claim host only for the first request */
@@ -1974,7 +1975,7 @@ static int mmc_blk_issue_rq(struct mmc_q
 	}
 
 	mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
-	if (req && req->cmd_flags & REQ_DISCARD) {
+	if (cmd_flags & REQ_DISCARD) {
 		/* complete ongoing async transfer before issuing discard */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
@@ -1983,7 +1984,7 @@ static int mmc_blk_issue_rq(struct mmc_q
 			ret = mmc_blk_issue_secdiscard_rq(mq, req);
 		else
 			ret = mmc_blk_issue_discard_rq(mq, req);
-	} else if (req && req->cmd_flags & REQ_FLUSH) {
+	} else if (cmd_flags & REQ_FLUSH) {
 		/* complete ongoing async transfer before issuing flush */
 		if (card->host->areq)
 			mmc_blk_issue_rw_rq(mq, NULL);
@@ -1999,7 +2000,7 @@ static int mmc_blk_issue_rq(struct mmc_q
 
 out:
 	if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) ||
-	     (req && (req->cmd_flags & MMC_REQ_SPECIAL_MASK)))
+	     (cmd_flags & MMC_REQ_SPECIAL_MASK))
 		/*
 		 * Release host when there are no more requests
 		 * and after special request(discard, flush) is done.

[PATCH 3.12 020/107] mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ludovic Desroches <ludovic.desroches@atmel.com>

commit 66b512eda74d59b17eac04c4da1b38d82059e6c9 upstream.

With some SDIO devices, timeout errors can happen when reading data.
To solve this issue, the DMA transfer has to be activated before sending
the command to the device. This order is incorrect in PDC mode. So we
have to take care if we are using DMA or PDC to know when to send the
MMC command.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/atmel-mci.c |   13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1193,11 +1193,22 @@ static void atmci_start_request(struct a
 	iflags |= ATMCI_CMDRDY;
 	cmd = mrq->cmd;
 	cmdflags = atmci_prepare_command(slot->mmc, cmd);
-	atmci_send_command(host, cmd, cmdflags);
+
+	/*
+	 * DMA transfer should be started before sending the command to avoid
+	 * unexpected errors especially for read operations in SDIO mode.
+	 * Unfortunately, in PDC mode, command has to be sent before starting
+	 * the transfer.
+	 */
+	if (host->submit_data != &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
 
 	if (data)
 		host->submit_data(host, data);
 
+	if (host->submit_data == &atmci_submit_data_dma)
+		atmci_send_command(host, cmd, cmdflags);
+
 	if (mrq->stop) {
 		host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop);
 		host->stop_cmdr |= ATMCI_CMDR_STOP_XFER;

[PATCH 3.12 021/107] mmc: core: sd: implement proper support for sd3.0 au sizes

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wolfram Sang <wsa@the-dreams.de>

commit 9288cac05405a7da406097a44721aa4004609b4d upstream.

This reverts and updates commit 77776fd0a4cc541b9 ("mmc: sd: fix the
maximum au_size for SD3.0"). The au_size for SD3.0 cannot be achieved
by a simple bit shift, so this needs to be implemented differently.
Also, don't print the warning in case of 0 since 'not defined' is
different from 'invalid'.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/core/sd.c |   37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -11,6 +11,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/sizes.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
 
@@ -44,6 +45,13 @@ static const unsigned int tacc_mant[] =
 	35,	40,	45,	50,	55,	60,	70,	80,
 };
 
+static const unsigned int sd_au_size[] = {
+	0,		SZ_16K / 512,		SZ_32K / 512,	SZ_64K / 512,
+	SZ_128K / 512,	SZ_256K / 512,		SZ_512K / 512,	SZ_1M / 512,
+	SZ_2M / 512,	SZ_4M / 512,		SZ_8M / 512,	(SZ_8M + SZ_4M) / 512,
+	SZ_16M / 512,	(SZ_16M + SZ_8M) / 512,	SZ_32M / 512,	SZ_64M / 512,
+};
+
 #define UNSTUFF_BITS(resp,start,size)					\
 	({								\
 		const int __size = size;				\
@@ -215,7 +223,7 @@ static int mmc_decode_scr(struct mmc_car
 static int mmc_read_ssr(struct mmc_card *card)
 {
 	unsigned int au, es, et, eo;
-	int err, i, max_au;
+	int err, i;
 	u32 *ssr;
 
 	if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
@@ -239,26 +247,25 @@ static int mmc_read_ssr(struct mmc_card
 	for (i = 0; i < 16; i++)
 		ssr[i] = be32_to_cpu(ssr[i]);
 
-	/* SD3.0 increases max AU size to 64MB (0xF) from 4MB (0x9) */
-	max_au = card->scr.sda_spec3 ? 0xF : 0x9;
-
 	/*
 	 * UNSTUFF_BITS only works with four u32s so we have to offset the
 	 * bitfield positions accordingly.
 	 */
 	au = UNSTUFF_BITS(ssr, 428 - 384, 4);
-	if (au > 0 && au <= max_au) {
-		card->ssr.au = 1 << (au + 4);
-		es = UNSTUFF_BITS(ssr, 408 - 384, 16);
-		et = UNSTUFF_BITS(ssr, 402 - 384, 6);
-		eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
-		if (es && et) {
-			card->ssr.erase_timeout = (et * 1000) / es;
-			card->ssr.erase_offset = eo * 1000;
+	if (au) {
+		if (au <= 9 || card->scr.sda_spec3) {
+			card->ssr.au = sd_au_size[au];
+			es = UNSTUFF_BITS(ssr, 408 - 384, 16);
+			et = UNSTUFF_BITS(ssr, 402 - 384, 6);
+			if (es && et) {
+				eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
+				card->ssr.erase_timeout = (et * 1000) / es;
+				card->ssr.erase_offset = eo * 1000;
+			}
+		} else {
+			pr_warning("%s: SD Status: Invalid Allocation Unit size.\n",
+				   mmc_hostname(card->host));
 		}
-	} else {
-		pr_warning("%s: SD Status: Invalid Allocation Unit "
-			"size.\n", mmc_hostname(card->host));
 	}
 out:
 	kfree(ssr);

[PATCH 3.12 022/107] ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

commit f28d7de6bd4d41774744e011141945affa127da4 upstream.

DT-enabled Marvell Kirkwood and Dove SoCs make use of an irqchip
driver. As expected for irqchip drivers, it uses a C-style
interrupt handler and therefore selects MULTI_IRQ_HANDLER.

Now, compiling a kernel with both non-DT and DT support enabled,
selecting MULTI_IRQ_HANDLER will break ASM irq handler used by
non-DT boards.

Therefore, we provide a C-style irq handler even for non-DT boards,
if MULTI_IRQ_HANDLER is set. By installing the C-style irq handler
in orion_irq_init this is transparent to all non-DT board files.

While the regression report was filed on Marvell Kirkwood, also
Marvell Dove non-DT boards are affected and fixed by this patch.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Ian Campbell <ijc@hellion.org.uk>
Reported-by: Ian Campbell <ijc@hellion.org.uk>
Fixes: 2326f04321a9 ("ARM: kirkwood: convert to DT irqchip and clocksource")
Fixes: f07d73e33d0e ("ARM: dove: convert to DT irqchip and clocksource")
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/plat-orion/irq.c |   47 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

--- a/arch/arm/plat-orion/irq.c
+++ b/arch/arm/plat-orion/irq.c
@@ -15,8 +15,51 @@
 #include <linux/io.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
+#include <asm/exception.h>
 #include <plat/irq.h>
 #include <plat/orion-gpio.h>
+#include <mach/bridge-regs.h>
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+/*
+ * Compiling with both non-DT and DT support enabled, will
+ * break asm irq handler used by non-DT boards. Therefore,
+ * we provide a C-style irq handler even for non-DT boards,
+ * if MULTI_IRQ_HANDLER is set.
+ *
+ * Notes:
+ * - this is prepared for Kirkwood and Dove only, update
+ *   accordingly if you add Orion5x or MV78x00.
+ * - Orion5x uses different macro names and has only one
+ *   set of CAUSE/MASK registers.
+ * - MV78x00 uses the same macro names but has a third
+ *   set of CAUSE/MASK registers.
+ *
+ */
+
+static void __iomem *orion_irq_base = IRQ_VIRT_BASE;
+
+asmlinkage void
+__exception_irq_entry orion_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(orion_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(orion_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(orion_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+#endif
 
 void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 {
@@ -35,6 +78,10 @@ void __init orion_irq_init(unsigned int
 	ct->chip.irq_unmask = irq_gc_mask_set_bit;
 	irq_setup_generic_chip(gc, IRQ_MSK(32), IRQ_GC_INIT_MASK_CACHE,
 			       IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE);
+
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+	set_handle_irq(orion_legacy_handle_irq);
+#endif
 }
 
 #ifdef CONFIG_OF

[PATCH 3.12 023/107] ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gregory CLEMENT <gregory.clement@free-electrons.com>

commit dc4910d9e93f8cc56b190dd8fc9e789135978216 upstream.

When pci_base is accessed whereas it has not been properly mapped by
of_iomap() the kernel hang. The check of this pointer made an improper
use of IS_ERR() instead of comparing to NULL. This patch fix this
issue.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Fixes: 930ab3d403ae (i2c: mv64xxx: Add I2C Transaction Generator support)
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-mvebu/mvebu-soc-id.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-mvebu/mvebu-soc-id.c
+++ b/arch/arm/mach-mvebu/mvebu-soc-id.c
@@ -88,7 +88,7 @@ static int __init mvebu_soc_id_init(void
 	}
 
 	pci_base = of_iomap(child, 0);
-	if (IS_ERR(pci_base)) {
+	if (pci_base == NULL) {
 		pr_err("cannot map registers\n");
 		ret = -ENOMEM;
 		goto res_ioremap;

[PATCH 3.12 024/107] slub: Fix calculation of cpu slabs

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Zefan <lizefan@huawei.com>

commit 8afb1474db4701d1ab80cd8251137a3260e6913e upstream.

  /sys/kernel/slab/:t-0000048 # cat cpu_slabs
  231 N0=16 N1=215
  /sys/kernel/slab/:t-0000048 # cat slabs
  145 N0=36 N1=109

See, the number of slabs is smaller than that of cpu slabs.

The bug was introduced by commit 49e2258586b423684f03c278149ab46d8f8b6700
("slub: per cpu cache for partial pages").

We should use page->pages instead of page->pobjects when calculating
the number of cpu partial slabs. This also fixes the mapping of slabs
and nodes.

As there's no variable storing the number of total/active objects in
cpu partial slabs, and we don't have user interfaces requiring those
statistics, I just add WARN_ON for those cases.

Acked-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/slub.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/mm/slub.c
+++ b/mm/slub.c
@@ -4272,7 +4272,13 @@ static ssize_t show_slab_objects(struct
 
 			page = ACCESS_ONCE(c->partial);
 			if (page) {
-				x = page->pobjects;
+				node = page_to_nid(page);
+				if (flags & SO_TOTAL)
+					WARN_ON_ONCE(1);
+				else if (flags & SO_OBJECTS)
+					WARN_ON_ONCE(1);
+				else
+					x = page->pages;
 				total += x;
 				nodes[node] += x;
 			}

[PATCH 3.12 025/107] turbostat: Dont put unprocessed uapi headers in the include path

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Triplett <josh@joshtriplett.org>

commit b731f3119de57144e16c19fd593b8daeb637843e upstream.

turbostat's Makefile puts arch/x86/include/uapi/ in the include path, so
that it can include <asm/msr.h> from it.  It isn't in general safe to
include even uapi headers directly from the kernel tree without
processing them through scripts/headers_install.sh, but asm/msr.h
happens to work.

However, that include path can break with some versions of system
headers, by overriding some system headers with the unprocessed versions
directly from the kernel source.  For instance:

In file included from /build/x86-generic/usr/include/bits/sigcontext.h:28:0,
                 from /build/x86-generic/usr/include/signal.h:339,
                 from /build/x86-generic/usr/include/sys/wait.h:31,
                 from turbostat.c:27:
../../../../arch/x86/include/uapi/asm/sigcontext.h:4:28: fatal error: linux/compiler.h: No such file or directory

This occurs because the system bits/sigcontext.h on that build system
includes <asm/sigcontext.h>, and asm/sigcontext.h in the kernel source
includes <linux/compiler.h>, which scripts/headers_install.sh would have
filtered out.

Since turbostat really only wants a single header, just include that one
header rather than putting an entire directory of kernel headers on the
include path.

In the process, switch from msr.h to msr-index.h, since turbostat just
wants the MSR numbers.

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/power/x86/turbostat/Makefile    |    2 +-
 tools/power/x86/turbostat/turbostat.c |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@@ -5,7 +5,7 @@ DESTDIR		:=
 
 turbostat : turbostat.c
 CFLAGS +=	-Wall
-CFLAGS +=	-I../../../../arch/x86/include/uapi/
+CFLAGS +=	-DMSRHEADER='"../../../../arch/x86/include/uapi/asm/msr-index.h"'
 
 %: %.c
 	@mkdir -p $(BUILD_OUTPUT)
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -20,7 +20,7 @@
  */
 
 #define _GNU_SOURCE
-#include <asm/msr.h>
+#include MSRHEADER
 #include <stdio.h>
 #include <unistd.h>
 #include <sys/types.h>

[PATCH 3.12 027/107] ACPI / init: Flag use of ACPI and ACPI idioms for power supplies to regulator API

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mark Brown <broonie@linaro.org>

commit 49a12877d2777cadcb838981c3c4f5a424aef310 upstream.

There is currently no facility in ACPI to express the hookup of voltage
regulators, the expectation is that the regulators that exist in the
system will be handled transparently by firmware if they need software
control at all. This means that if for some reason the regulator API is
enabled on such a system it should assume that any supplies that devices
need are provided by the system at all relevant times without any software
intervention.

Tell the regulator core to make this assumption by calling
regulator_has_full_constraints(). Do this as soon as we know we are using
ACPI so that the information is available to the regulator core as early
as possible. This will cause the regulator core to pretend that there is
an always on regulator supplying any supply that is requested but that has
not otherwise been mapped which is the behaviour expected on a system with
ACPI.

Should the ability to specify regulators be added in future revisions of
ACPI then once we have support for ACPI mappings in the kernel the same
assumptions will apply. It is also likely that systems will default to a
mode of operation which does not require any interpretation of these
mappings in order to be compatible with existing operating system releases
so it should remain safe to make these assumptions even if the mappings
exist but are not supported by the kernel.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/bus.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -33,6 +33,7 @@
 #include <linux/proc_fs.h>
 #include <linux/acpi.h>
 #include <linux/slab.h>
+#include <linux/regulator/machine.h>
 #ifdef CONFIG_X86
 #include <asm/mpspec.h>
 #endif
@@ -575,6 +576,14 @@ void __init acpi_early_init(void)
 		goto error0;
 	}
 
+	/*
+	 * If the system is using ACPI then we can be reasonably
+	 * confident that any regulators are managed by the firmware
+	 * so tell the regulator core it has everything it needs to
+	 * know.
+	 */
+	regulator_has_full_constraints();
+
 	return;
 
       error0:

[PATCH 3.12 028/107] compat: fix sys_fanotify_mark

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit 592f6b842f64e416c7598a1b97c649b34241e22d upstream.

Commit 91c2e0bcae72 ("unify compat fanotify_mark(2), switch to
COMPAT_SYSCALL_DEFINE") added a new unified compat fanotify_mark syscall
to be used by all architectures.

Unfortunately the unified version merges the split mask parameter in a
wrong way: the lower and higher word got swapped.

This was discovered with glibc's tst-fanotify test case.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Andreas Krebbel <krebbel@linux.vnet.ibm.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Acked-by: "David S. Miller" <davem@davemloft.net>
Acked-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/notify/fanotify/fanotify_user.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/notify/fanotify/fanotify_user.c
+++ b/fs/notify/fanotify/fanotify_user.c
@@ -888,9 +888,9 @@ COMPAT_SYSCALL_DEFINE6(fanotify_mark,
 {
 	return sys_fanotify_mark(fanotify_fd, flags,
 #ifdef __BIG_ENDIAN
-				((__u64)mask1 << 32) | mask0,
-#else
 				((__u64)mask0 << 32) | mask1,
+#else
+				((__u64)mask1 << 32) | mask0,
 #endif
 				 dfd, pathname);
 }

[PATCH 3.12 029/107] fs/compat: fix parameter handling for compat readv/writev syscalls

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit dfd948e32af2e7b28bcd7a490c0a30d4b8df2a36 upstream.

We got a report that the pwritev syscall does not work correctly in
compat mode on s390.

It turned out that with commit 72ec35163f9f ("switch compat readv/writev
variants to COMPAT_SYSCALL_DEFINE") we lost the zero extension of a
couple of syscall parameters because the some parameter types haven't
been converted from unsigned long to compat_ulong_t.

This is needed for architectures where the ABI requires that the caller
of a function performed zero and/or sign extension to 64 bit of all
parameters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/read_write.c        |   16 ++++++++--------
 include/linux/compat.h |   16 ++++++++--------
 2 files changed, 16 insertions(+), 16 deletions(-)

--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -977,9 +977,9 @@ out:
 	return ret;
 }
 
-COMPAT_SYSCALL_DEFINE3(readv, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE3(readv, compat_ulong_t, fd,
 		const struct compat_iovec __user *,vec,
-		unsigned long, vlen)
+		compat_ulong_t, vlen)
 {
 	struct fd f = fdget(fd);
 	ssize_t ret;
@@ -1014,9 +1014,9 @@ COMPAT_SYSCALL_DEFINE4(preadv64, unsigne
 	return ret;
 }
 
-COMPAT_SYSCALL_DEFINE5(preadv, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE5(preadv, compat_ulong_t, fd,
 		const struct compat_iovec __user *,vec,
-		unsigned long, vlen, u32, pos_low, u32, pos_high)
+		compat_ulong_t, vlen, u32, pos_low, u32, pos_high)
 {
 	loff_t pos = ((loff_t)pos_high << 32) | pos_low;
 	return compat_sys_preadv64(fd, vec, vlen, pos);
@@ -1044,9 +1044,9 @@ out:
 	return ret;
 }
 
-COMPAT_SYSCALL_DEFINE3(writev, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE3(writev, compat_ulong_t, fd,
 		const struct compat_iovec __user *, vec,
-		unsigned long, vlen)
+		compat_ulong_t, vlen)
 {
 	struct fd f = fdget(fd);
 	ssize_t ret;
@@ -1081,9 +1081,9 @@ COMPAT_SYSCALL_DEFINE4(pwritev64, unsign
 	return ret;
 }
 
-COMPAT_SYSCALL_DEFINE5(pwritev, unsigned long, fd,
+COMPAT_SYSCALL_DEFINE5(pwritev, compat_ulong_t, fd,
 		const struct compat_iovec __user *,vec,
-		unsigned long, vlen, u32, pos_low, u32, pos_high)
+		compat_ulong_t, vlen, u32, pos_low, u32, pos_high)
 {
 	loff_t pos = ((loff_t)pos_high << 32) | pos_low;
 	return compat_sys_pwritev64(fd, vec, vlen, pos);
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -327,16 +327,16 @@ asmlinkage long compat_sys_keyctl(u32 op
 			      u32 arg2, u32 arg3, u32 arg4, u32 arg5);
 asmlinkage long compat_sys_ustat(unsigned dev, struct compat_ustat __user *u32);
 
-asmlinkage ssize_t compat_sys_readv(unsigned long fd,
-		const struct compat_iovec __user *vec, unsigned long vlen);
-asmlinkage ssize_t compat_sys_writev(unsigned long fd,
-		const struct compat_iovec __user *vec, unsigned long vlen);
-asmlinkage ssize_t compat_sys_preadv(unsigned long fd,
+asmlinkage ssize_t compat_sys_readv(compat_ulong_t fd,
+		const struct compat_iovec __user *vec, compat_ulong_t vlen);
+asmlinkage ssize_t compat_sys_writev(compat_ulong_t fd,
+		const struct compat_iovec __user *vec, compat_ulong_t vlen);
+asmlinkage ssize_t compat_sys_preadv(compat_ulong_t fd,
 		const struct compat_iovec __user *vec,
-		unsigned long vlen, u32 pos_low, u32 pos_high);
-asmlinkage ssize_t compat_sys_pwritev(unsigned long fd,
+		compat_ulong_t vlen, u32 pos_low, u32 pos_high);
+asmlinkage ssize_t compat_sys_pwritev(compat_ulong_t fd,
 		const struct compat_iovec __user *vec,
-		unsigned long vlen, u32 pos_low, u32 pos_high);
+		compat_ulong_t vlen, u32 pos_low, u32 pos_high);
 asmlinkage long comat_sys_lseek(unsigned int, compat_off_t, unsigned int);
 
 asmlinkage long compat_sys_execve(const char __user *filename, const compat_uptr_t __user *argv,

[PATCH 3.12 030/107] fs/compat: fix lookup_dcookie() parameter handling

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit d8d14bd09cddbaf0168d61af638455a26bd027ff upstream.

Commit d5dc77bfeeab ("consolidate compat lookup_dcookie()") coverted all
architectures to the new compat_sys_lookup_dcookie() syscall.

The "len" paramater of the new compat syscall must have the type
compat_size_t in order to enforce zero extension for architectures where
the ABI requires that the caller of a function performed zero and/or
sign extension to 64 bit of all parameters.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/dcookies.c          |    2 +-
 include/linux/compat.h |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

--- a/fs/dcookies.c
+++ b/fs/dcookies.c
@@ -204,7 +204,7 @@ out:
 }
 
 #ifdef CONFIG_COMPAT
-COMPAT_SYSCALL_DEFINE4(lookup_dcookie, u32, w0, u32, w1, char __user *, buf, size_t, len)
+COMPAT_SYSCALL_DEFINE4(lookup_dcookie, u32, w0, u32, w1, char __user *, buf, compat_size_t, len)
 {
 #ifdef __BIG_ENDIAN
 	return sys_lookup_dcookie(((u64)w0 << 32) | w1, buf, len);
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -422,7 +422,7 @@ extern long compat_arch_ptrace(struct ta
 asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
 				  compat_long_t addr, compat_long_t data);
 
-asmlinkage long compat_sys_lookup_dcookie(u32, u32, char __user *, size_t);
+asmlinkage long compat_sys_lookup_dcookie(u32, u32, char __user *, compat_size_t);
 /*
  * epoll (fs/eventpoll.c) compat bits follow ...
  */

[PATCH 3.12 031/107] tile: remove compat_sys_lookup_dcookie declaration to fix compile error

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Heiko Carstens <heiko.carstens@de.ibm.com>

commit 5a5e75f4714a592f31e57f248b8f5c866f278b8d upstream.

With commit d8d14bd09cdd ("fs/compat: fix lookup_dcookie() parameter
handling") I changed the type of the len parameter of the
lookup_dcookie() syscall.

However I missed that there was still a stale declaration in
arch/tile/..  which now causes a compile error on tile:

  In file included from fs/dcookies.c:28:0:
  include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie'
  fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie'

Simply remove the declaration in the tile architecture, which is only a
leftover from before the different compat lookup_dcookie() versions have
been merged.  The correct declaration is now in include/linux/compat.h

The build error was reported by Fenguang's build bot.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/tile/include/asm/compat.h |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/tile/include/asm/compat.h
+++ b/arch/tile/include/asm/compat.h
@@ -281,7 +281,6 @@ long compat_sys_pread64(unsigned int fd,
 			u32 dummy, u32 low, u32 high);
 long compat_sys_pwrite64(unsigned int fd, char __user *ubuf, size_t count,
 			 u32 dummy, u32 low, u32 high);
-long compat_sys_lookup_dcookie(u32 low, u32 high, char __user *buf, size_t len);
 long compat_sys_sync_file_range2(int fd, unsigned int flags,
 				 u32 offset_lo, u32 offset_hi,
 				 u32 nbytes_lo, u32 nbytes_hi);

[PATCH 3.12 032/107] mtd: mxc_nand: remove duplicated ecc_stats counting

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Grzeschik <m.grzeschik@pengutronix.de>

commit 0566477762f9e174e97af347ee9c865f908a5647 upstream.

The ecc_stats.corrected count variable will already be incremented in
the above framework-layer just after this callback.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/mxc_nand.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -676,7 +676,6 @@ static int mxc_nand_correct_data_v2_v3(s
 		ecc_stat >>= 4;
 	} while (--no_subpages);
 
-	mtd->ecc_stats.corrected += ret;
 	pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
 
 	return ret;

[PATCH 3.12 033/107] ore: Fix wrong math in allocation of per device BIO

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boaz Harrosh <bharrosh@panasas.com>

commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream.

At IO preparation we calculate the max pages at each device and
allocate a BIO per device of that size. The calculation was wrong
on some unaligned corner cases offset/length combination and would
make prepare return with -ENOMEM. This would be bad for pnfs-objects
that would in that case IO through MDS. And fatal for exofs were it
would fail writes with EIO.

Fix it by doing the proper math, that will work in all cases. (I
ran a test with all possible offset/length combinations this time
round).

Also when reading we do not need to allocate for the parity units
since we jump over them.

Also lower the max_io_length to take into account the parity pages
so not to allocate BIOs bigger than PAGE_SIZE

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/exofs/ore.c         |   37 +++++++++++++++++++++++++------------
 include/scsi/osd_ore.h |    1 +
 2 files changed, 26 insertions(+), 12 deletions(-)

--- a/fs/exofs/ore.c
+++ b/fs/exofs/ore.c
@@ -103,7 +103,7 @@ int ore_verify_layout(unsigned total_com
 
 	layout->max_io_length =
 		(BIO_MAX_PAGES_KMALLOC * PAGE_SIZE - layout->stripe_unit) *
-							layout->group_width;
+					(layout->group_width - layout->parity);
 	if (layout->parity) {
 		unsigned stripe_length =
 				(layout->group_width - layout->parity) *
@@ -286,7 +286,8 @@ int  ore_get_rw_state(struct ore_layout
 	if (length) {
 		ore_calc_stripe_info(layout, offset, length, &ios->si);
 		ios->length = ios->si.length;
-		ios->nr_pages = (ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
+		ios->nr_pages = ((ios->offset & (PAGE_SIZE - 1)) +
+				 ios->length + PAGE_SIZE - 1) / PAGE_SIZE;
 		if (layout->parity)
 			_ore_post_alloc_raid_stuff(ios);
 	}
@@ -536,6 +537,7 @@ void ore_calc_stripe_info(struct ore_lay
 	u64	H = LmodS - G * T;
 
 	u32	N = div_u64(H, U);
+	u32	Nlast;
 
 	/* "H - (N * U)" is just "H % U" so it's bound to u32 */
 	u32	C = (u32)(H - (N * U)) / stripe_unit + G * group_width;
@@ -568,6 +570,10 @@ void ore_calc_stripe_info(struct ore_lay
 	si->length = T - H;
 	if (si->length > length)
 		si->length = length;
+
+	Nlast = div_u64(H + si->length + U - 1, U);
+	si->maxdevUnits = Nlast - N;
+
 	si->M = M;
 }
 EXPORT_SYMBOL(ore_calc_stripe_info);
@@ -583,13 +589,16 @@ int _ore_add_stripe_unit(struct ore_io_s
 	int ret;
 
 	if (per_dev->bio == NULL) {
-		unsigned pages_in_stripe = ios->layout->group_width *
-					(ios->layout->stripe_unit / PAGE_SIZE);
-		unsigned nr_pages = ios->nr_pages * ios->layout->group_width /
-					(ios->layout->group_width -
-					 ios->layout->parity);
-		unsigned bio_size = (nr_pages + pages_in_stripe) /
-					ios->layout->group_width;
+		unsigned bio_size;
+
+		if (!ios->reading) {
+			bio_size = ios->si.maxdevUnits;
+		} else {
+			bio_size = (ios->si.maxdevUnits + 1) *
+			     (ios->layout->group_width - ios->layout->parity) /
+			     ios->layout->group_width;
+		}
+		bio_size *= (ios->layout->stripe_unit / PAGE_SIZE);
 
 		per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size);
 		if (unlikely(!per_dev->bio)) {
@@ -609,8 +618,12 @@ int _ore_add_stripe_unit(struct ore_io_s
 		added_len = bio_add_pc_page(q, per_dev->bio, pages[pg],
 					    pglen, pgbase);
 		if (unlikely(pglen != added_len)) {
-			ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=%u\n",
-				   per_dev->bio->bi_vcnt);
+			/* If bi_vcnt == bi_max then this is a SW BUG */
+			ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=0x%x "
+				   "bi_max=0x%x BIO_MAX=0x%x cur_len=0x%x\n",
+				   per_dev->bio->bi_vcnt,
+				   per_dev->bio->bi_max_vecs,
+				   BIO_MAX_PAGES_KMALLOC, cur_len);
 			ret = -ENOMEM;
 			goto out;
 		}
@@ -1098,7 +1111,7 @@ int ore_truncate(struct ore_layout *layo
 		size_attr->attr = g_attr_logical_length;
 		size_attr->attr.val_ptr = &size_attr->newsize;
 
-		ORE_DBGMSG("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
+		ORE_DBGMSG2("trunc(0x%llx) obj_offset=0x%llx dev=%d\n",
 			     _LLU(oc->comps->obj.id), _LLU(obj_size), i);
 		ret = _truncate_mirrors(ios, i * ios->layout->mirrors_p1,
 					&size_attr->attr);
--- a/include/scsi/osd_ore.h
+++ b/include/scsi/osd_ore.h
@@ -102,6 +102,7 @@ struct ore_striping_info {
 	unsigned unit_off;
 	unsigned cur_pg;
 	unsigned cur_comp;
+	unsigned maxdevUnits;
 };
 
 struct ore_io_state;

[PATCH 3.12 034/107] xtensa: xtfpga: fix definitions of platform devices

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit a558d99263936b8a67d4eff8918745a77bfd8c31 upstream.

Remove __initdata attribute, as the devices may be used after init
sections are freed.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/platforms/xtfpga/setup.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/arch/xtensa/platforms/xtfpga/setup.c
+++ b/arch/xtensa/platforms/xtfpga/setup.c
@@ -194,7 +194,7 @@ void __init platform_calibrate_ccount(vo
  *  Ethernet -- OpenCores Ethernet MAC (ethoc driver)
  */
 
-static struct resource ethoc_res[] __initdata = {
+static struct resource ethoc_res[] = {
 	[0] = { /* register space */
 		.start = OETH_REGS_PADDR,
 		.end   = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
@@ -212,7 +212,7 @@ static struct resource ethoc_res[] __ini
 	},
 };
 
-static struct ethoc_platform_data ethoc_pdata __initdata = {
+static struct ethoc_platform_data ethoc_pdata = {
 	/*
 	 * The MAC address for these boards is 00:50:c2:13:6f:xx.
 	 * The last byte (here as zero) is read from the DIP switches on the
@@ -222,7 +222,7 @@ static struct ethoc_platform_data ethoc_
 	.phy_id = -1,
 };
 
-static struct platform_device ethoc_device __initdata = {
+static struct platform_device ethoc_device = {
 	.name = "ethoc",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(ethoc_res),
@@ -236,13 +236,13 @@ static struct platform_device ethoc_devi
  *  UART
  */
 
-static struct resource serial_resource __initdata = {
+static struct resource serial_resource = {
 	.start	= DUART16552_PADDR,
 	.end	= DUART16552_PADDR + 0x1f,
 	.flags	= IORESOURCE_MEM,
 };
 
-static struct plat_serial8250_port serial_platform_data[] __initdata = {
+static struct plat_serial8250_port serial_platform_data[] = {
 	[0] = {
 		.mapbase	= DUART16552_PADDR,
 		.irq		= DUART16552_INTNUM,
@@ -255,7 +255,7 @@ static struct plat_serial8250_port seria
 	{ },
 };
 
-static struct platform_device xtavnet_uart __initdata = {
+static struct platform_device xtavnet_uart = {
 	.name		= "serial8250",
 	.id		= PLAT8250_DEV_PLATFORM,
 	.dev		= {

[PATCH 3.12 035/107] IB/qib: Fix QP check when looping back to/from QP1

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ira Weiny <ira.weiny@intel.com>

commit 6e0ea9e6cbcead7fa8c76e3e3b9de4a50c5131c5 upstream.

The GSI QP type is compatible with and should be allowed to send data
to/from any UD QP.  This was found when testing ibacm on the same node
as an SA.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/hw/qib/qib_ud.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -57,13 +57,20 @@ static void qib_ud_loopback(struct qib_q
 	struct qib_sge *sge;
 	struct ib_wc wc;
 	u32 length;
+	enum ib_qp_type sqptype, dqptype;
 
 	qp = qib_lookup_qpn(ibp, swqe->wr.wr.ud.remote_qpn);
 	if (!qp) {
 		ibp->n_pkt_drops++;
 		return;
 	}
-	if (qp->ibqp.qp_type != sqp->ibqp.qp_type ||
+
+	sqptype = sqp->ibqp.qp_type == IB_QPT_GSI ?
+			IB_QPT_UD : sqp->ibqp.qp_type;
+	dqptype = qp->ibqp.qp_type == IB_QPT_GSI ?
+			IB_QPT_UD : qp->ibqp.qp_type;
+
+	if (dqptype != sqptype ||
 	    !(ib_qib_state_ops[qp->state] & QIB_PROCESS_RECV_OK)) {
 		ibp->n_pkt_drops++;
 		goto drop;

[PATCH 3.12 036/107] spi/bcm63xx: dont substract prepend length from total length

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jonas Gorski <jogo@openwrt.org>

commit 86b3bde003e6bf60ccb9c09b4115b8a2f533974c upstream.

The spi command must include the full message length including any
prepended writes, else transfers larger than 256 bytes will be
incomplete.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-bcm63xx.c |    2 --
 1 file changed, 2 deletions(-)

--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -169,8 +169,6 @@ static int bcm63xx_txrx_bufs(struct spi_
 			       transfer_list);
 	}
 
-	len -= prepend_len;
-
 	init_completion(&bs->done);
 
 	/* Fill in the Message control register */

[PATCH 3.12 037/107] spidev: fix hang when transfer_one_message fails

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Santos <daniel.santos@pobox.com>

commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d upstream.

This corrects a problem in spi_pump_messages() that leads to an spi
message hanging forever when a call to transfer_one_message() fails.
This failure occurs in my MCP2210 driver when the cs_change bit is set
on the last transfer in a message, an operation which the hardware does
not support.

Rationale
Since the transfer_one_message() returns an int, we must presume that it
may fail.  If transfer_one_message() should never fail, it should return
void.  Thus, calls to transfer_one_message() should properly manage a
failure.

Fixes: ffbbdd21329f3 (spi: create a message queueing infrastructure)
Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -600,7 +600,9 @@ static void spi_pump_messages(struct kth
 	ret = master->transfer_one_message(master, master->cur_msg);
 	if (ret) {
 		dev_err(&master->dev,
-			"failed to transfer one message from queue\n");
+			"failed to transfer one message from queue: %d\n", ret);
+		master->cur_msg->status = ret;
+		spi_finalize_current_message(master);
 		return;
 	}
 }

[PATCH 3.12 038/107] spi/pxa2xx: initialize DMA channels to -1 to prevent inadvertent match

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 483c319188c74e82b29a0ed7a7fa7065570f2193 upstream.

Commit cddb339badb0 (spi/pxa2xx: convert to dma_request_slave_channel_compat())
converted the driver to use ACPI provided DMA helpers but it forgot to
initialize the platform data for the channels to -1. Failing to do so will
result inadvertent match in the filter function because 0 is a valid
channel number.

Prevent this from happening by initializing both platform data channels
correctly to -1.

Fixes: cddb339badb0 (spi/pxa2xx: convert to dma_request_slave_channel_compat())
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-pxa2xx.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1070,6 +1070,8 @@ pxa2xx_spi_acpi_get_pdata(struct platfor
 
 	pdata->num_chipselect = 1;
 	pdata->enable_dma = true;
+	pdata->tx_chan_id = -1;
+	pdata->rx_chan_id = -1;
 
 	return pdata;
 }

[PATCH 3.12 039/107] NFSv4: OPEN must handle the NFS4ERR_IO return code correctly

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit c7848f69ec4a8c03732cde5c949bd2aa711a9f4b upstream.

decode_op_hdr() cannot distinguish between an XDR decoding error and
the perfectly valid errorcode NFS4ERR_IO. This is normally not a
problem, but for the particular case of OPEN, we need to be able
to increment the NFSv4 open sequence id when the server returns
a valid response.

Reported-by: J Bruce Fields <bfields@fieldses.org>
Link: http://lkml.kernel.org/r/20131204210356.GA19452@fieldses.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4xdr.c |   47 +++++++++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 16 deletions(-)

--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -3053,7 +3053,8 @@ out_overflow:
 	return -EIO;
 }
 
-static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
+static bool __decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected,
+		int *nfs_retval)
 {
 	__be32 *p;
 	uint32_t opnum;
@@ -3063,19 +3064,32 @@ static int decode_op_hdr(struct xdr_stre
 	if (unlikely(!p))
 		goto out_overflow;
 	opnum = be32_to_cpup(p++);
-	if (opnum != expected) {
-		dprintk("nfs: Server returned operation"
-			" %d but we issued a request for %d\n",
-				opnum, expected);
-		return -EIO;
-	}
+	if (unlikely(opnum != expected))
+		goto out_bad_operation;
 	nfserr = be32_to_cpup(p);
-	if (nfserr != NFS_OK)
-		return nfs4_stat_to_errno(nfserr);
-	return 0;
+	if (nfserr == NFS_OK)
+		*nfs_retval = 0;
+	else
+		*nfs_retval = nfs4_stat_to_errno(nfserr);
+	return true;
+out_bad_operation:
+	dprintk("nfs: Server returned operation"
+		" %d but we issued a request for %d\n",
+			opnum, expected);
+	*nfs_retval = -EREMOTEIO;
+	return false;
 out_overflow:
 	print_overflow_msg(__func__, xdr);
-	return -EIO;
+	*nfs_retval = -EIO;
+	return false;
+}
+
+static int decode_op_hdr(struct xdr_stream *xdr, enum nfs_opnum4 expected)
+{
+	int retval;
+
+	__decode_op_hdr(xdr, expected, &retval);
+	return retval;
 }
 
 /* Dummy routine */
@@ -4957,11 +4971,12 @@ static int decode_open(struct xdr_stream
 	uint32_t savewords, bmlen, i;
 	int status;
 
-	status = decode_op_hdr(xdr, OP_OPEN);
-	if (status != -EIO)
-		nfs_increment_open_seqid(status, res->seqid);
-	if (!status)
-		status = decode_stateid(xdr, &res->stateid);
+	if (!__decode_op_hdr(xdr, OP_OPEN, &status))
+		return status;
+	nfs_increment_open_seqid(status, res->seqid);
+	if (status)
+		return status;
+	status = decode_stateid(xdr, &res->stateid);
 	if (unlikely(status))
 		return status;
 

[PATCH 3.12 040/107] nfs4.1: properly handle ENOTSUP in SECINFO_NO_NAME

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Weston Andros Adamson <dros@primarydata.com>

commit 78b19bae0813bd6f921ca58490196abd101297bd upstream.

Don't check for -NFS4ERR_NOTSUPP, it's already been mapped to -ENOTSUPP
by nfs4_stat_to_errno.

This allows the client to mount v4.1 servers that don't support
SECINFO_NO_NAME by falling back to the "guess and check" method of
nfs4_find_root_sec.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7561,7 +7561,7 @@ nfs41_proc_secinfo_no_name(struct nfs_se
 		switch (err) {
 		case 0:
 		case -NFS4ERR_WRONGSEC:
-		case -NFS4ERR_NOTSUPP:
+		case -ENOTSUPP:
 			goto out;
 		default:
 			err = nfs4_handle_exception(server, err, &exception);
@@ -7595,7 +7595,7 @@ nfs41_find_root_sec(struct nfs_server *s
 	 * Fall back on "guess and check" method if
 	 * the server doesn't support SECINFO_NO_NAME
 	 */
-	if (err == -NFS4ERR_WRONGSEC || err == -NFS4ERR_NOTSUPP) {
+	if (err == -NFS4ERR_WRONGSEC || err == -ENOTSUPP) {
 		err = nfs4_find_root_sec(server, fhandle, info);
 		goto out_freepage;
 	}

[PATCH 3.12 042/107] NFSv4.1: Handle errors correctly in nfs41_walk_client_list

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit 64590daa9e0dfb3aad89e3ab9230683b76211d5b upstream.

Both nfs41_walk_client_list and nfs40_walk_client_list expect the
'status' variable to be set to the value -NFS4ERR_STALE_CLIENTID
if the loop fails to find a match.
The problem is that the 'pos->cl_cons_state > NFS_CS_READY' changes
the value of 'status', and sets it either to the value '0' (which
indicates success), or to the value EINTR.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4client.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -491,9 +491,10 @@ int nfs40_walk_client_list(struct nfs_cl
 			prev = pos;
 
 			status = nfs_wait_client_init_complete(pos);
-			spin_lock(&nn->nfs_client_lock);
 			if (status < 0)
-				continue;
+				goto out;
+			status = -NFS4ERR_STALE_CLIENTID;
+			spin_lock(&nn->nfs_client_lock);
 		}
 		if (pos->cl_cons_state != NFS_CS_READY)
 			continue;
@@ -631,7 +632,8 @@ int nfs41_walk_client_list(struct nfs_cl
 			}
 			spin_lock(&nn->nfs_client_lock);
 			if (status < 0)
-				continue;
+				break;
+			status = -NFS4ERR_STALE_CLIENTID;
 		}
 		if (pos->cl_cons_state != NFS_CS_READY)
 			continue;

[PATCH 3.12 043/107] nfs4: fix discover_server_trunking use after free

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Weston Andros Adamson <dros@primarydata.com>

commit abad2fa5ba67725a3f9c376c8cfe76fbe94a3041 upstream.

If clp is new (cl_count = 1) and it matches another client in
nfs4_discover_server_trunking, the nfs_put_client will free clp before
->cl_preserve_clid is set.

Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4client.c |   10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

--- a/fs/nfs/nfs4client.c
+++ b/fs/nfs/nfs4client.c
@@ -407,13 +407,11 @@ struct nfs_client *nfs4_init_client(stru
 	error = nfs4_discover_server_trunking(clp, &old);
 	if (error < 0)
 		goto error;
-	nfs_put_client(clp);
-	if (clp != old) {
-		clp->cl_preserve_clid = true;
-		clp = old;
-	}
 
-	return clp;
+	if (clp != old)
+		clp->cl_preserve_clid = true;
+	nfs_put_client(clp);
+	return old;
 
 error:
 	nfs_mark_client_ready(clp, error);

[PATCH 3.12 044/107] pnfs: Proper delay for NFS4ERR_RECALLCONFLICT in layout_get_done

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Boaz Harrosh <bharrosh@panasas.com>

commit ed7e5423014ad89720fcf315c0b73f2c5d0c7bd2 upstream.

An NFS4ERR_RECALLCONFLICT is returned by server from a GET_LAYOUT
only when a Server Sent a RECALL do to that GET_LAYOUT, or
the RECALL and GET_LAYOUT crossed on the wire.
In any way this means we want to wait at most until in-flight IO
is finished and the RECALL can be satisfied.

So a proper wait here is more like 1/10 of a second, not 15 seconds
like we have now. In case of a server bug we delay exponentially
longer on each retry.

Current code totally craps out performance of very large files on
most pnfs-objects layouts, because of how the map changes when the
file has grown into the next raid group.

[Stable: This will patch back to 3.9. If there are earlier still
 maintained trees, please tell me I'll send a patch]

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |   34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -7057,9 +7057,9 @@ static void nfs4_layoutget_done(struct r
 	struct nfs_server *server = NFS_SERVER(inode);
 	struct pnfs_layout_hdr *lo;
 	struct nfs4_state *state = NULL;
-	unsigned long timeo, giveup;
+	unsigned long timeo, now, giveup;
 
-	dprintk("--> %s\n", __func__);
+	dprintk("--> %s tk_status => %d\n", __func__, -task->tk_status);
 
 	if (!nfs41_sequence_done(task, &lgp->res.seq_res))
 		goto out;
@@ -7067,12 +7067,38 @@ static void nfs4_layoutget_done(struct r
 	switch (task->tk_status) {
 	case 0:
 		goto out;
+	/*
+	 * NFS4ERR_LAYOUTTRYLATER is a conflict with another client
+	 * (or clients) writing to the same RAID stripe
+	 */
 	case -NFS4ERR_LAYOUTTRYLATER:
+	/*
+	 * NFS4ERR_RECALLCONFLICT is when conflict with self (must recall
+	 * existing layout before getting a new one).
+	 */
 	case -NFS4ERR_RECALLCONFLICT:
 		timeo = rpc_get_timeout(task->tk_client);
 		giveup = lgp->args.timestamp + timeo;
-		if (time_after(giveup, jiffies))
-			task->tk_status = -NFS4ERR_DELAY;
+		now = jiffies;
+		if (time_after(giveup, now)) {
+			unsigned long delay;
+
+			/* Delay for:
+			 * - Not less then NFS4_POLL_RETRY_MIN.
+			 * - One last time a jiffie before we give up
+			 * - exponential backoff (time_now minus start_attempt)
+			 */
+			delay = max_t(unsigned long, NFS4_POLL_RETRY_MIN,
+				    min((giveup - now - 1),
+					now - lgp->args.timestamp));
+
+			dprintk("%s: NFS4ERR_RECALLCONFLICT waiting %lu\n",
+				__func__, delay);
+			rpc_delay(task, delay);
+			task->tk_status = 0;
+			rpc_restart_call_prepare(task);
+			goto out; /* Do not call nfs4_async_handle_error() */
+		}
 		break;
 	case -NFS4ERR_EXPIRED:
 	case -NFS4ERR_BAD_STATEID:

[PATCH 3.12 045/107] NFSv4: Fix a slot leak in nfs40_sequence_done

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trond.myklebust@primarydata.com>

commit cab92c19821a814ecf5a5279e2699bf28e66caee upstream.

The check for whether or not we sent an RPC call in nfs40_sequence_done
is insufficient to decide whether or not we are holding a session slot,
and thus should not be used to decide when to free that slot.

This patch replaces the RPC_WAS_SENT() test with the correct test for
whether or not slot == NULL.

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -532,7 +532,7 @@ static int nfs40_sequence_done(struct rp
 	struct nfs4_slot *slot = res->sr_slot;
 	struct nfs4_slot_table *tbl;
 
-	if (!RPC_WAS_SENT(task))
+	if (slot == NULL)
 		goto out;
 
 	tbl = slot->table;

[PATCH 3.12 046/107] sunrpc: Fix infinite loop in RPC state machine

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Weston Andros Adamson <dros@netapp.com>

commit 6ff33b7dd0228b7d7ed44791bbbc98b03fd15d9d upstream.

When a task enters call_refreshresult with status 0 from call_refresh and
!rpcauth_uptodatecred(task) it enters call_refresh again with no rate-limiting
or max number of retries.

Instead of trying forever, make use of the retry path that other errors use.

This only seems to be possible when the crrefresh callback is gss_refresh_null,
which only happens when destroying the context.

To reproduce:

1) mount with sec=krb5 (or sec=sys with krb5 negotiated for non FSID specific
   operations).

2) reboot - the client will be stuck and will need to be hard rebooted

BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:46]
Modules linked in: rpcsec_gss_krb5 nfsv4 nfs fscache ppdev crc32c_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd serio_raw i2c_piix4 i2c_core e1000 parport_pc parport shpchp nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd sunrpc autofs4 mptspi scsi_transport_spi mptscsih mptbase ata_generic floppy
irq event stamp: 195724
hardirqs last  enabled at (195723): [<ffffffff814a925c>] restore_args+0x0/0x30
hardirqs last disabled at (195724): [<ffffffff814b0a6a>] apic_timer_interrupt+0x6a/0x80
softirqs last  enabled at (195722): [<ffffffff8103f583>] __do_softirq+0x1df/0x276
softirqs last disabled at (195717): [<ffffffff8103f852>] irq_exit+0x53/0x9a
CPU: 0 PID: 46 Comm: kworker/0:2 Not tainted 3.13.0-rc3-branch-dros_testing+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
Workqueue: rpciod rpc_async_schedule [sunrpc]
task: ffff8800799c4260 ti: ffff880079002000 task.ti: ffff880079002000
RIP: 0010:[<ffffffffa0064fd4>]  [<ffffffffa0064fd4>] __rpc_execute+0x8a/0x362 [sunrpc]
RSP: 0018:ffff880079003d18  EFLAGS: 00000246
RAX: 0000000000000005 RBX: 0000000000000007 RCX: 0000000000000007
RDX: 0000000000000007 RSI: ffff88007aecbae8 RDI: ffff8800783d8900
RBP: ffff880079003d78 R08: ffff88006e30e9f8 R09: ffffffffa005a3d7
R10: ffff88006e30e7b0 R11: ffff8800783d8900 R12: ffffffffa006675e
R13: ffff880079003ce8 R14: ffff88006e30e7b0 R15: ffff8800783d8900
FS:  0000000000000000(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3072333000 CR3: 0000000001a0b000 CR4: 00000000001407f0
Stack:
 ffff880079003d98 0000000000000246 0000000000000000 ffff88007a9a4830
 ffff880000000000 ffffffff81073f47 ffff88007f212b00 ffff8800799c4260
 ffff8800783d8988 ffff88007f212b00 ffffe8ffff604800 0000000000000000
Call Trace:
 [<ffffffff81073f47>] ? trace_hardirqs_on_caller+0x145/0x1a1
 [<ffffffffa00652d3>] rpc_async_schedule+0x27/0x32 [sunrpc]
 [<ffffffff81052974>] process_one_work+0x211/0x3a5
 [<ffffffff810528d5>] ? process_one_work+0x172/0x3a5
 [<ffffffff81052eeb>] worker_thread+0x134/0x202
 [<ffffffff81052db7>] ? rescuer_thread+0x280/0x280
 [<ffffffff81052db7>] ? rescuer_thread+0x280/0x280
 [<ffffffff810584a0>] kthread+0xc9/0xd1
 [<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61
 [<ffffffff814afd6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61
Code: e8 87 63 fd e0 c6 05 10 dd 01 00 01 48 8b 43 70 4c 8d 6b 70 45 31 e4 a8 02 0f 85 d5 02 00 00 4c 8b 7b 48 48 c7 43 48 00 00 00 00 <4c> 8b 4b 50 4d 85 ff 75 0c 4d 85 c9 4d 89 cf 0f 84 32 01 00 00

And the output of "rpcdebug -m rpc -s all":

RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refresh (status 0)
RPC:    61 call_refreshresult (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refreshresult (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/clnt.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1433,9 +1433,13 @@ call_refreshresult(struct rpc_task *task
 	task->tk_action = call_refresh;
 	switch (status) {
 	case 0:
-		if (rpcauth_uptodatecred(task))
+		if (rpcauth_uptodatecred(task)) {
 			task->tk_action = call_allocate;
-		return;
+			return;
+		}
+		/* Use rate-limiting and a max number of retries if refresh
+		 * had status 0 but failed to update the cred.
+		 */
 	case -ETIMEDOUT:
 		rpc_delay(task, 3*HZ);
 	case -EAGAIN:

[PATCH 3.12 047/107] sunrpc: dont wait for write before allowing reads from use-gss-proxy file

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Layton <jlayton@redhat.com>

commit 1654a04cd702fd19c297c36300a6ab834cf8c072 upstream.

It doesn't make much sense to make reads from this procfile hang. As
far as I can tell, only gssproxy itself will open this file and it
never reads from it. Change it to just give the present setting of
sn->use_gss_proxy without waiting for anything.

Note that we do not want to call use_gss_proxy() in this codepath
since an inopportune read of this file could cause it to be disabled
prematurely.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/auth_gss/gss_rpc_upcall.c |    2 --
 net/sunrpc/auth_gss/svcauth_gss.c    |   33 ++-------------------------------
 net/sunrpc/netns.h                   |    1 -
 3 files changed, 2 insertions(+), 34 deletions(-)

--- a/net/sunrpc/auth_gss/gss_rpc_upcall.c
+++ b/net/sunrpc/auth_gss/gss_rpc_upcall.c
@@ -137,7 +137,6 @@ void init_gssp_clnt(struct sunrpc_net *s
 {
 	mutex_init(&sn->gssp_lock);
 	sn->gssp_clnt = NULL;
-	init_waitqueue_head(&sn->gssp_wq);
 }
 
 int set_gssp_clnt(struct net *net)
@@ -154,7 +153,6 @@ int set_gssp_clnt(struct net *net)
 		sn->gssp_clnt = clnt;
 	}
 	mutex_unlock(&sn->gssp_lock);
-	wake_up(&sn->gssp_wq);
 	return ret;
 }
 
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -1295,34 +1295,9 @@ static int set_gss_proxy(struct net *net
 	else
 		ret = -EBUSY;
 	spin_unlock(&use_gssp_lock);
-	wake_up(&sn->gssp_wq);
 	return ret;
 }
 
-static inline bool gssp_ready(struct sunrpc_net *sn)
-{
-	switch (sn->use_gss_proxy) {
-		case -1:
-			return false;
-		case 0:
-			return true;
-		case 1:
-			return sn->gssp_clnt;
-	}
-	WARN_ON_ONCE(1);
-	return false;
-}
-
-static int wait_for_gss_proxy(struct net *net, struct file *file)
-{
-	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
-
-	if (file->f_flags & O_NONBLOCK && !gssp_ready(sn))
-		return -EAGAIN;
-	return wait_event_interruptible(sn->gssp_wq, gssp_ready(sn));
-}
-
-
 static ssize_t write_gssp(struct file *file, const char __user *buf,
 			 size_t count, loff_t *ppos)
 {
@@ -1355,16 +1330,12 @@ static ssize_t read_gssp(struct file *fi
 			 size_t count, loff_t *ppos)
 {
 	struct net *net = PDE_DATA(file_inode(file));
+	struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
 	unsigned long p = *ppos;
 	char tbuf[10];
 	size_t len;
-	int ret;
-
-	ret = wait_for_gss_proxy(net, file);
-	if (ret)
-		return ret;
 
-	snprintf(tbuf, sizeof(tbuf), "%d\n", use_gss_proxy(net));
+	snprintf(tbuf, sizeof(tbuf), "%d\n", sn->use_gss_proxy);
 	len = strlen(tbuf);
 	if (p >= len)
 		return 0;
--- a/net/sunrpc/netns.h
+++ b/net/sunrpc/netns.h
@@ -26,7 +26,6 @@ struct sunrpc_net {
 	unsigned int rpcb_is_af_local : 1;
 
 	struct mutex gssp_lock;
-	wait_queue_head_t gssp_wq;
 	struct rpc_clnt *gssp_clnt;
 	int use_gss_proxy;
 	int pipe_version;

[PATCH 3.12 048/107] dm thin: fix discard support to a previously shared block

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 19fa1a6756ed9e92daa9537c03b47d6b55cc2316 upstream.

If a snapshot is created and later deleted the origin dm_thin_device's
snapshotted_time will have been updated to reflect the snapshot's
creation time.  The 'shared' flag in the dm_thin_lookup_result struct
returned from dm_thin_find_block() is an approximation based on
snapshotted_time -- this is done to avoid 0(n), or worse, time
complexity.  In this case, the shared flag would be true.

But because the 'shared' flag reflects an approximation a block can be
incorrectly assumed to be shared (e.g. false positive for 'shared'
because the snapshot no longer exists).  This could result in discards
issued to a thin device not being passed down to the pool's underlying
data device.

To fix this we double check that a thin block is really still in-use
after a mapping is removed using dm_pool_block_is_used().  If the
reference count for a block is now zero the discard is allowed to be
passed down.

Also add a 'definitely_not_shared' member to the dm_thin_new_mapping
structure -- reflects that the 'shared' flag in the response from
dm_thin_find_block() can only be held as definitive if false is
returned.

Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1043527

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin-metadata.c |   20 ++++++++++++++++++++
 drivers/md/dm-thin-metadata.h |    2 ++
 drivers/md/dm-thin.c          |   14 ++++++++++++--
 3 files changed, 34 insertions(+), 2 deletions(-)

--- a/drivers/md/dm-thin-metadata.c
+++ b/drivers/md/dm-thin-metadata.c
@@ -1349,6 +1349,12 @@ dm_thin_id dm_thin_dev_id(struct dm_thin
 	return td->id;
 }
 
+/*
+ * Check whether @time (of block creation) is older than @td's last snapshot.
+ * If so then the associated block is shared with the last snapshot device.
+ * Any block on a device created *after* the device last got snapshotted is
+ * necessarily not shared.
+ */
 static bool __snapshotted_since(struct dm_thin_device *td, uint32_t time)
 {
 	return td->snapshotted_time > time;
@@ -1457,6 +1463,20 @@ int dm_thin_remove_block(struct dm_thin_
 
 	return r;
 }
+
+int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result)
+{
+	int r;
+	uint32_t ref_count;
+
+	down_read(&pmd->root_lock);
+	r = dm_sm_get_count(pmd->data_sm, b, &ref_count);
+	if (!r)
+		*result = (ref_count != 0);
+	up_read(&pmd->root_lock);
+
+	return r;
+}
 
 bool dm_thin_changed_this_transaction(struct dm_thin_device *td)
 {
--- a/drivers/md/dm-thin-metadata.h
+++ b/drivers/md/dm-thin-metadata.h
@@ -181,6 +181,8 @@ int dm_pool_get_data_block_size(struct d
 
 int dm_pool_get_data_dev_size(struct dm_pool_metadata *pmd, dm_block_t *result);
 
+int dm_pool_block_is_used(struct dm_pool_metadata *pmd, dm_block_t b, bool *result);
+
 /*
  * Returns -ENOSPC if the new size is too small and already allocated
  * blocks would be lost.
--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -512,6 +512,7 @@ struct dm_thin_new_mapping {
 	unsigned quiesced:1;
 	unsigned prepared:1;
 	unsigned pass_discard:1;
+	unsigned definitely_not_shared:1;
 
 	struct thin_c *tc;
 	dm_block_t virt_block;
@@ -683,7 +684,15 @@ static void process_prepared_discard_pas
 	cell_defer_no_holder(tc, m->cell2);
 
 	if (m->pass_discard)
-		remap_and_issue(tc, m->bio, m->data_block);
+		if (m->definitely_not_shared)
+			remap_and_issue(tc, m->bio, m->data_block);
+		else {
+			bool used = false;
+			if (dm_pool_block_is_used(tc->pool->pmd, m->data_block, &used) || used)
+				bio_endio(m->bio, 0);
+			else
+				remap_and_issue(tc, m->bio, m->data_block);
+		}
 	else
 		bio_endio(m->bio, 0);
 
@@ -1040,7 +1049,8 @@ static void process_discard(struct thin_
 			 */
 			m = get_next_mapping(pool);
 			m->tc = tc;
-			m->pass_discard = (!lookup_result.shared) && pool->pf.discard_passdown;
+			m->pass_discard = pool->pf.discard_passdown;
+			m->definitely_not_shared = !lookup_result.shared;
 			m->virt_block = block;
 			m->data_block = lookup_result.block;
 			m->cell = cell;

[PATCH 3.12 049/107] dm thin: initialize dm_thin_new_mapping returned by get_next_mapping

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit 16961b042db8cc5cf75d782b4255193ad56e1d4f upstream.

As additional members are added to the dm_thin_new_mapping structure
care should be taken to make sure they get initialized before use.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin.c |   17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)

--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -760,13 +760,17 @@ static int ensure_next_mapping(struct po
 
 static struct dm_thin_new_mapping *get_next_mapping(struct pool *pool)
 {
-	struct dm_thin_new_mapping *r = pool->next_mapping;
+	struct dm_thin_new_mapping *m = pool->next_mapping;
 
 	BUG_ON(!pool->next_mapping);
 
+	memset(m, 0, sizeof(struct dm_thin_new_mapping));
+	INIT_LIST_HEAD(&m->list);
+	m->bio = NULL;
+
 	pool->next_mapping = NULL;
 
-	return r;
+	return m;
 }
 
 static void schedule_copy(struct thin_c *tc, dm_block_t virt_block,
@@ -778,15 +782,10 @@ static void schedule_copy(struct thin_c
 	struct pool *pool = tc->pool;
 	struct dm_thin_new_mapping *m = get_next_mapping(pool);
 
-	INIT_LIST_HEAD(&m->list);
-	m->quiesced = 0;
-	m->prepared = 0;
 	m->tc = tc;
 	m->virt_block = virt_block;
 	m->data_block = data_dest;
 	m->cell = cell;
-	m->err = 0;
-	m->bio = NULL;
 
 	if (!dm_deferred_set_add_work(pool->shared_read_ds, &m->list))
 		m->quiesced = 1;
@@ -849,15 +848,12 @@ static void schedule_zero(struct thin_c
 	struct pool *pool = tc->pool;
 	struct dm_thin_new_mapping *m = get_next_mapping(pool);
 
-	INIT_LIST_HEAD(&m->list);
 	m->quiesced = 1;
 	m->prepared = 0;
 	m->tc = tc;
 	m->virt_block = virt_block;
 	m->data_block = data_block;
 	m->cell = cell;
-	m->err = 0;
-	m->bio = NULL;
 
 	/*
 	 * If the whole block of data is being overwritten or we are not
@@ -1055,7 +1051,6 @@ static void process_discard(struct thin_
 			m->data_block = lookup_result.block;
 			m->cell = cell;
 			m->cell2 = cell2;
-			m->err = 0;
 			m->bio = bio;
 
 			if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list)) {

[PATCH 3.12 050/107] dm thin: fix set_pool_mode exposed pool operation races

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit 8b64e881eb40ac8b9bfcbce068a97eef819044ee upstream.

The pool mode must not be switched until after the corresponding pool
process_* methods have been established.  Otherwise, because
set_pool_mode() isn't interlocked with the IO path for performance
reasons, the IO path can end up executing process_* operations that
don't match the mode.  This patch eliminates problems like the following
(as seen on really fast PCIe SSD storage when transitioning the pool's
mode from PM_READ_ONLY to PM_WRITE):

kernel: device-mapper: thin: 253:2: reached low water mark for data device: sending event.
kernel: device-mapper: thin: 253:2: no free data space available.
kernel: device-mapper: thin: 253:2: switching pool to read-only mode
kernel: device-mapper: thin: 253:2: switching pool to write mode
kernel: ------------[ cut here ]------------
kernel: WARNING: CPU: 11 PID: 7564 at drivers/md/dm-thin.c:995 handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]()
...
kernel: Workqueue: dm-thin do_worker [dm_thin_pool]
kernel: 00000000000003e3 ffff880308831cc8 ffffffff8152ebcb 00000000000003e3
kernel: 0000000000000000 ffff880308831d08 ffffffff8104c46c ffff88032502a800
kernel: ffff880036409000 ffff88030ec7ce00 0000000000000001 00000000ffffffc3
kernel: Call Trace:
kernel: [<ffffffff8152ebcb>] dump_stack+0x49/0x5e
kernel: [<ffffffff8104c46c>] warn_slowpath_common+0x8c/0xc0
kernel: [<ffffffff8104c4ba>] warn_slowpath_null+0x1a/0x20
kernel: [<ffffffffa001e2c6>] handle_unserviceable_bio+0x146/0x160 [dm_thin_pool]
kernel: [<ffffffffa001f276>] process_bio_read_only+0x136/0x180 [dm_thin_pool]
kernel: [<ffffffffa0020b75>] process_deferred_bios+0xc5/0x230 [dm_thin_pool]
kernel: [<ffffffffa0020d31>] do_worker+0x51/0x60 [dm_thin_pool]
kernel: [<ffffffff81067823>] process_one_work+0x183/0x490
kernel: [<ffffffff81068c70>] worker_thread+0x120/0x3a0
kernel: [<ffffffff81068b50>] ? manage_workers+0x160/0x160
kernel: [<ffffffff8106e86e>] kthread+0xce/0xf0
kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70
kernel: [<ffffffff8153b3ec>] ret_from_fork+0x7c/0xb0
kernel: [<ffffffff8106e7a0>] ? kthread_freezable_should_stop+0x70/0x70
kernel: ---[ end trace 3f00528e08ffa55c ]---
kernel: device-mapper: thin: pool mode is PM_WRITE not PM_READ_ONLY like expected!?

dm-thin.c:995 was the WARN_ON_ONCE(get_pool_mode(pool) != PM_READ_ONLY);
at the top of handle_unserviceable_bio().  And as the additional
debugging I had conveys: the pool mode was _not_ PM_READ_ONLY like
expected, it was already PM_WRITE, yet pool->process_bio was still set
to process_bio_read_only().

Also, while fixing this up, reduce logging of redundant pool mode
transitions by checking new_mode is different from old_mode.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin.c |   40 +++++++++++++++++++++++++++-------------
 1 file changed, 27 insertions(+), 13 deletions(-)

--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -1395,16 +1395,16 @@ static enum pool_mode get_pool_mode(stru
 	return pool->pf.mode;
 }
 
-static void set_pool_mode(struct pool *pool, enum pool_mode mode)
+static void set_pool_mode(struct pool *pool, enum pool_mode new_mode)
 {
 	int r;
+	enum pool_mode old_mode = pool->pf.mode;
 
-	pool->pf.mode = mode;
-
-	switch (mode) {
+	switch (new_mode) {
 	case PM_FAIL:
-		DMERR("%s: switching pool to failure mode",
-		      dm_device_name(pool->pool_md));
+		if (old_mode != new_mode)
+			DMERR("%s: switching pool to failure mode",
+			      dm_device_name(pool->pool_md));
 		dm_pool_metadata_read_only(pool->pmd);
 		pool->process_bio = process_bio_fail;
 		pool->process_discard = process_bio_fail;
@@ -1413,13 +1413,15 @@ static void set_pool_mode(struct pool *p
 		break;
 
 	case PM_READ_ONLY:
-		DMERR("%s: switching pool to read-only mode",
-		      dm_device_name(pool->pool_md));
+		if (old_mode != new_mode)
+			DMERR("%s: switching pool to read-only mode",
+			      dm_device_name(pool->pool_md));
 		r = dm_pool_abort_metadata(pool->pmd);
 		if (r) {
 			DMERR("%s: aborting transaction failed",
 			      dm_device_name(pool->pool_md));
-			set_pool_mode(pool, PM_FAIL);
+			new_mode = PM_FAIL;
+			set_pool_mode(pool, new_mode);
 		} else {
 			dm_pool_metadata_read_only(pool->pmd);
 			pool->process_bio = process_bio_read_only;
@@ -1430,6 +1432,9 @@ static void set_pool_mode(struct pool *p
 		break;
 
 	case PM_WRITE:
+		if (old_mode != new_mode)
+			DMINFO("%s: switching pool to write mode",
+			       dm_device_name(pool->pool_md));
 		dm_pool_metadata_read_write(pool->pmd);
 		pool->process_bio = process_bio;
 		pool->process_discard = process_discard;
@@ -1437,6 +1442,8 @@ static void set_pool_mode(struct pool *p
 		pool->process_prepared_discard = process_prepared_discard;
 		break;
 	}
+
+	pool->pf.mode = new_mode;
 }
 
 /*----------------------------------------------------------------*/
@@ -1653,6 +1660,17 @@ static int bind_control_target(struct po
 	enum pool_mode new_mode = pt->adjusted_pf.mode;
 
 	/*
+	 * Don't change the pool's mode until set_pool_mode() below.
+	 * Otherwise the pool's process_* function pointers may
+	 * not match the desired pool mode.
+	 */
+	pt->adjusted_pf.mode = old_mode;
+
+	pool->ti = ti;
+	pool->pf = pt->adjusted_pf;
+	pool->low_water_blocks = pt->low_water_blocks;
+
+	/*
 	 * If we were in PM_FAIL mode, rollback of metadata failed.  We're
 	 * not going to recover without a thin_repair.  So we never let the
 	 * pool move out of the old mode.  On the other hand a PM_READ_ONLY
@@ -1662,10 +1680,6 @@ static int bind_control_target(struct po
 	if (old_mode == PM_FAIL)
 		new_mode = old_mode;
 
-	pool->ti = ti;
-	pool->low_water_blocks = pt->low_water_blocks;
-	pool->pf = pt->adjusted_pf;
-
 	set_pool_mode(pool, new_mode);
 
 	return 0;

[PATCH 3.12 051/107] dm: wait until embedded kobject is released before destroying a device

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit be35f486108227e10fe5d96fd42fb2b344c59983 upstream.

There may be other parts of the kernel holding a reference on the dm
kobject.  We must wait until all references are dropped before
deallocating the mapped_device structure.

The dm_kobject_release method signals that all references are dropped
via completion.  But dm_kobject_release doesn't free the kobject (which
is embedded in the mapped_device structure).

This is the sequence of operations:
* when destroying a DM device, call kobject_put from dm_sysfs_exit
* wait until all users stop using the kobject, when it happens the
  release method is called
* the release method signals the completion and should return without
  delay
* the dm device removal code that waits on the completion continues
* the dm device removal code drops the dm_mod reference the device had
* the dm device removal code frees the mapped_device structure that
  contains the kobject

Using kobject this way should avoid the module unload race that was
mentioned at the beginning of this thread:
https://lkml.org/lkml/2014/1/4/83

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-sysfs.c |   10 +++++++++-
 drivers/md/dm.c       |   11 +++++++++++
 drivers/md/dm.h       |    2 ++
 3 files changed, 22 insertions(+), 1 deletion(-)

--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -79,6 +79,11 @@ static const struct sysfs_ops dm_sysfs_o
 	.show	= dm_attr_show,
 };
 
+static void dm_kobject_release(struct kobject *kobj)
+{
+	complete(dm_get_completion_from_kobject(kobj));
+}
+
 /*
  * dm kobject is embedded in mapped_device structure
  * no need to define release function here
@@ -86,6 +91,7 @@ static const struct sysfs_ops dm_sysfs_o
 static struct kobj_type dm_ktype = {
 	.sysfs_ops	= &dm_sysfs_ops,
 	.default_attrs	= dm_attrs,
+	.release	= dm_kobject_release,
 };
 
 /*
@@ -104,5 +110,7 @@ int dm_sysfs_init(struct mapped_device *
  */
 void dm_sysfs_exit(struct mapped_device *md)
 {
-	kobject_put(dm_kobject(md));
+	struct kobject *kobj = dm_kobject(md);
+	kobject_put(kobj);
+	wait_for_completion(dm_get_completion_from_kobject(kobj));
 }
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -197,6 +197,9 @@ struct mapped_device {
 	/* sysfs handle */
 	struct kobject kobj;
 
+	/* wait until the kobject is released */
+	struct completion kobj_completion;
+
 	/* zero-length flush that will be cloned and submitted to targets */
 	struct bio flush_bio;
 
@@ -2005,6 +2008,7 @@ static struct mapped_device *alloc_dev(i
 	init_waitqueue_head(&md->wait);
 	INIT_WORK(&md->work, dm_wq_work);
 	init_waitqueue_head(&md->eventq);
+	init_completion(&md->kobj_completion);
 
 	md->disk->major = _major;
 	md->disk->first_minor = minor;
@@ -2889,6 +2893,13 @@ struct mapped_device *dm_get_from_kobjec
 	return md;
 }
 
+struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
+{
+	struct mapped_device *md = container_of(kobj, struct mapped_device, kobj);
+
+	return &md->kobj_completion;
+}
+
 int dm_suspended_md(struct mapped_device *md)
 {
 	return test_bit(DMF_SUSPENDED, &md->flags);
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
+#include <linux/completion.h>
 
 #include "dm-stats.h"
 
@@ -142,6 +143,7 @@ int dm_sysfs_init(struct mapped_device *
 void dm_sysfs_exit(struct mapped_device *md);
 struct kobject *dm_kobject(struct mapped_device *md);
 struct mapped_device *dm_get_from_kobject(struct kobject *kobj);
+struct completion *dm_get_completion_from_kobject(struct kobject *kobj);
 
 /*
  * Targets for linear and striped mappings

[PATCH 3.12 052/107] dm space map common: make sure new space is used during extend

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 12c91a5c2d2a8e8cc40a9552313e1e7b0a2d9ee3 upstream.

When extending a low level space map we should update nr_blocks at
the start so the new space is used for the index entries.

Otherwise extend can fail, e.g.: sm_metadata_extend call sequence
that fails:
 -> sm_ll_extend
    -> dm_tm_new_block -> dm_sm_new_block -> sm_bootstrap_new_block
    => returns -ENOSPC because smm->begin == smm->ll.nr_blocks

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-space-map-common.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/md/persistent-data/dm-space-map-common.c
+++ b/drivers/md/persistent-data/dm-space-map-common.c
@@ -245,6 +245,10 @@ int sm_ll_extend(struct ll_disk *ll, dm_
 		return -EINVAL;
 	}
 
+	/*
+	 * We need to set this before the dm_tm_new_block() call below.
+	 */
+	ll->nr_blocks = nr_blocks;
 	for (i = old_blocks; i < blocks; i++) {
 		struct dm_block *b;
 		struct disk_index_entry idx;
@@ -252,6 +256,7 @@ int sm_ll_extend(struct ll_disk *ll, dm_
 		r = dm_tm_new_block(ll->tm, &dm_sm_bitmap_validator, &b);
 		if (r < 0)
 			return r;
+
 		idx.blocknr = cpu_to_le64(dm_block_location(b));
 
 		r = dm_tm_unlock(ll->tm, b);
@@ -266,7 +271,6 @@ int sm_ll_extend(struct ll_disk *ll, dm_
 			return r;
 	}
 
-	ll->nr_blocks = nr_blocks;
 	return 0;
 }
 

[PATCH 3.12 053/107] dm space map metadata: fix extending the space map

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 7e664b3dec431eebf0c5df5ff704d6197634cf35 upstream.

When extending a metadata space map we should do the first commit whilst
still in bootstrap mode -- a mode where all blocks get allocated in the
new area.

That way the commit overhead is allocated from the newly added space.
Otherwise we risk running out of space.

With this fix, and the previous commit "dm space map common: make sure
new space is used during extend", the following device mapper testsuite
test passes:
 dmtest run --suite thin-provisioning -n /resize_metadata_no_io/

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-space-map-metadata.c |   18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -608,20 +608,28 @@ static int sm_metadata_extend(struct dm_
 	 * Flick into a mode where all blocks get allocated in the new area.
 	 */
 	smm->begin = old_len;
-	memcpy(&smm->sm, &bootstrap_ops, sizeof(smm->sm));
+	memcpy(sm, &bootstrap_ops, sizeof(*sm));
 
 	/*
 	 * Extend.
 	 */
 	r = sm_ll_extend(&smm->ll, extra_blocks);
+	if (r)
+		goto out;
 
+	for (i = old_len; !r && i < smm->begin; i++) {
+		r = sm_ll_inc(&smm->ll, i, &ev);
+		if (r)
+			goto out;
+	}
+
+	r = sm_metadata_commit(sm);
+
+out:
 	/*
 	 * Switch back to normal behaviour.
 	 */
-	memcpy(&smm->sm, &ops, sizeof(smm->sm));
-	for (i = old_len; !r && i < smm->begin; i++)
-		r = sm_ll_inc(&smm->ll, i, &ev);
-
+	memcpy(sm, &ops, sizeof(*sm));
 	return r;
 }
 

[PATCH 3.12 054/107] dm space map metadata: fix bug in resizing of thin metadata

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit fca028438fb903852beaf7c3fe1cd326651af57d upstream.

This bug was introduced in commit 7e664b3dec431e ("dm space map metadata:
fix extending the space map").

When extending a dm-thin metadata volume we:

- Switch the space map into a simple bootstrap mode, which allocates
  all space linearly from the newly added space.
- Add new bitmap entries for the new space
- Increment the reference counts for those newly allocated bitmap
  entries
- Commit changes to disk
- Switch back out of bootstrap mode.

But, the disk commit may allocate space itself, if so this fact will be
lost when switching out of bootstrap mode.

The bug exhibited itself as an error when the bitmap_root, with an
erroneous ref count of 0, was subsequently decremented as part of a
later disk commit.  This would cause the disk commit to fail, and thinp
to enter read_only mode.  The metadata was not damaged (thin_check
passed).

The fix is to put the increments + commit into a loop, running until
the commit has not allocated extra space.  In practise this loop only
runs twice.

With this fix the following device mapper testsuite test passes:
 dmtest run --suite thin-provisioning -n thin_remove_works_after_resize

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/persistent-data/dm-space-map-metadata.c |   18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)

--- a/drivers/md/persistent-data/dm-space-map-metadata.c
+++ b/drivers/md/persistent-data/dm-space-map-metadata.c
@@ -617,13 +617,23 @@ static int sm_metadata_extend(struct dm_
 	if (r)
 		goto out;
 
-	for (i = old_len; !r && i < smm->begin; i++) {
-		r = sm_ll_inc(&smm->ll, i, &ev);
+	/*
+	 * We repeatedly increment then commit until the commit doesn't
+	 * allocate any new blocks.
+	 */
+	do {
+		for (i = old_len; !r && i < smm->begin; i++) {
+			r = sm_ll_inc(&smm->ll, i, &ev);
+			if (r)
+				goto out;
+		}
+		old_len = smm->begin;
+
+		r = sm_ll_commit(&smm->ll);
 		if (r)
 			goto out;
-	}
 
-	r = sm_metadata_commit(sm);
+	} while (old_len != smm->begin);
 
 out:
 	/*

[PATCH 3.12 056/107] drm/radeon/dpm: disable mclk switching on desktop RV770

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 8097d94116d0c17e774ba4c8256e774018dc2a46 upstream.

Mclk switching doesn't seem to work reliably on these
cards.  Most RV770 boards specify the same mclk for all
performance levels anyway so in most cases, this has
no affect.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73067

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/rv770_dpm.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -2531,6 +2531,12 @@ bool rv770_dpm_vblank_too_short(struct r
 	    (rdev->pdev->subsystem_device == 0x1c42))
 		switch_limit = 200;
 
+	/* RV770 */
+	/* mclk switching doesn't seem to work reliably on desktop RV770s */
+	if ((rdev->family == CHIP_RV770) &&
+	    !(rdev->flags & RADEON_IS_MOBILITY))
+		switch_limit = 0xffffffff; /* disable mclk switching */
+
 	if (vblank_time < switch_limit)
 		return true;
 	else

[PATCH 3.12 058/107] mei: mei_hbm_dispatch() returns void

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Bolle <pebolle@tiscali.nl>

Building hbm.o for v3.13.2 triggers a GCC warning:
    drivers/misc/mei/hbm.c: In function 'mei_hbm_dispatch':
    drivers/misc/mei/hbm.c:596:3: warning: 'return' with a value, in function returning void [enabled by default]
       return 0;
       ^

GCC is correct, obviously. So let's return void instead of zero here.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Compile tested only.

 drivers/misc/mei/hbm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -593,7 +593,7 @@ void mei_hbm_dispatch(struct mei_device
 	 */
 	if (dev->hbm_state == MEI_HBM_IDLE) {
 		dev_dbg(&dev->pdev->dev, "hbm: state is idle ignore spurious messages\n");
-		return 0;
+		return;
 	}
 
 	switch (mei_msg->hbm_cmd) {

[PATCH 3.12 059/107] percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kent Overstreet <kmo@daterainc.com>

commit 6f6b5d1ec56acdeab0503d2b823f6f88a0af493e upstream.

This patch changes percpu_ida_alloc() + callers to accept task state
bitmask for prepare_to_wait() for code like target/iscsi that needs
it for interruptible sleep, that is provided in a subsequent patch.

It now expects TASK_UNINTERRUPTIBLE when the caller is able to sleep
waiting for a new tag, or TASK_RUNNING when the caller cannot sleep,
and is forced to return a negative value when no tags are available.

v2 changes:
  - Include blk-mq + tcm_fc + vhost/scsi + target/iscsi changes
  - Drop signal_pending_state() call
v3 changes:
  - Only call prepare_to_wait() + finish_wait() when != TASK_RUNNING
    (PeterZ)

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_util.c |    8 ++++++--
 drivers/vhost/scsi.c                     |    2 +-
 include/linux/percpu_ida.h               |    3 ++-
 lib/percpu_ida.c                         |   16 +++++++++-------
 4 files changed, 18 insertions(+), 11 deletions(-)

--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -156,9 +156,13 @@ struct iscsi_cmd *iscsit_allocate_cmd(st
 {
 	struct iscsi_cmd *cmd;
 	struct se_session *se_sess = conn->sess->se_sess;
-	int size, tag;
+	int size, tag, state = (gfp_mask & __GFP_WAIT) ? TASK_UNINTERRUPTIBLE :
+				TASK_RUNNING;
+
+	tag = percpu_ida_alloc(&se_sess->sess_tag_pool, state);
+	if (tag < 0)
+		return NULL;
 
-	tag = percpu_ida_alloc(&se_sess->sess_tag_pool, gfp_mask);
 	size = sizeof(struct iscsi_cmd) + conn->conn_transport->priv_size;
 	cmd = (struct iscsi_cmd *)(se_sess->sess_cmd_map + (tag * size));
 	memset(cmd, 0, size);
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -728,7 +728,7 @@ vhost_scsi_get_tag(struct vhost_virtqueu
 	}
 	se_sess = tv_nexus->tvn_se_sess;
 
-	tag = percpu_ida_alloc(&se_sess->sess_tag_pool, GFP_ATOMIC);
+	tag = percpu_ida_alloc(&se_sess->sess_tag_pool, TASK_RUNNING);
 	if (tag < 0) {
 		pr_err("Unable to obtain tag for tcm_vhost_cmd\n");
 		return ERR_PTR(-ENOMEM);
--- a/include/linux/percpu_ida.h
+++ b/include/linux/percpu_ida.h
@@ -4,6 +4,7 @@
 #include <linux/types.h>
 #include <linux/bitops.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/spinlock_types.h>
 #include <linux/wait.h>
 #include <linux/cpumask.h>
@@ -51,7 +52,7 @@ struct percpu_ida {
 	} ____cacheline_aligned_in_smp;
 };
 
-int percpu_ida_alloc(struct percpu_ida *pool, gfp_t gfp);
+int percpu_ida_alloc(struct percpu_ida *pool, int state);
 void percpu_ida_free(struct percpu_ida *pool, unsigned tag);
 
 void percpu_ida_destroy(struct percpu_ida *pool);
--- a/lib/percpu_ida.c
+++ b/lib/percpu_ida.c
@@ -142,22 +142,22 @@ static inline unsigned alloc_local_tag(s
 /**
  * percpu_ida_alloc - allocate a tag
  * @pool: pool to allocate from
- * @gfp: gfp flags
+ * @state: task state for prepare_to_wait
  *
  * Returns a tag - an integer in the range [0..nr_tags) (passed to
  * tag_pool_init()), or otherwise -ENOSPC on allocation failure.
  *
  * Safe to be called from interrupt context (assuming it isn't passed
- * __GFP_WAIT, of course).
+ * TASK_UNINTERRUPTIBLE, of course).
  *
  * @gfp indicates whether or not to wait until a free id is available (it's not
  * used for internal memory allocations); thus if passed __GFP_WAIT we may sleep
  * however long it takes until another thread frees an id (same semantics as a
  * mempool).
  *
- * Will not fail if passed __GFP_WAIT.
+ * Will not fail if passed TASK_UNINTERRUPTIBLE.
  */
-int percpu_ida_alloc(struct percpu_ida *pool, gfp_t gfp)
+int percpu_ida_alloc(struct percpu_ida *pool, int state)
 {
 	DEFINE_WAIT(wait);
 	struct percpu_ida_cpu *tags;
@@ -184,7 +184,8 @@ int percpu_ida_alloc(struct percpu_ida *
 		 *
 		 * global lock held and irqs disabled, don't need percpu lock
 		 */
-		prepare_to_wait(&pool->wait, &wait, TASK_UNINTERRUPTIBLE);
+		if (state != TASK_RUNNING)
+			prepare_to_wait(&pool->wait, &wait, state);
 
 		if (!tags->nr_free)
 			alloc_global_tags(pool, tags);
@@ -201,7 +202,7 @@ int percpu_ida_alloc(struct percpu_ida *
 		spin_unlock(&pool->lock);
 		local_irq_restore(flags);
 
-		if (tag >= 0 || !(gfp & __GFP_WAIT))
+		if (tag >= 0 || state == TASK_RUNNING)
 			break;
 
 		schedule();
@@ -209,8 +210,9 @@ int percpu_ida_alloc(struct percpu_ida *
 		local_irq_save(flags);
 		tags = this_cpu_ptr(pool->tag_cpu);
 	}
+	if (state != TASK_RUNNING)
+		finish_wait(&pool->wait, &wait);
 
-	finish_wait(&pool->wait, &wait);
 	return tag;
 }
 EXPORT_SYMBOL_GPL(percpu_ida_alloc);

[PATCH 3.12 060/107] iscsi-target: Fix connection reset hang with percpu_ida_alloc

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 555b270e25b0279b98083518a85f4b1da144a181 upstream.

This patch addresses a bug where connection reset would hang
indefinately once percpu_ida_alloc() was starved for tags, due
to the fact that it always assumed uninterruptible sleep mode.

So now make percpu_ida_alloc() check for signal_pending_state() for
making interruptible sleep optional, and convert iscsit_allocate_cmd()
to set TASK_INTERRUPTIBLE for GFP_KERNEL, or TASK_RUNNING for
GFP_ATOMIC.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target_util.c |    2 +-
 lib/percpu_ida.c                         |    9 +++++++--
 2 files changed, 8 insertions(+), 3 deletions(-)

--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -156,7 +156,7 @@ struct iscsi_cmd *iscsit_allocate_cmd(st
 {
 	struct iscsi_cmd *cmd;
 	struct se_session *se_sess = conn->sess->se_sess;
-	int size, tag, state = (gfp_mask & __GFP_WAIT) ? TASK_UNINTERRUPTIBLE :
+	int size, tag, state = (gfp_mask & __GFP_WAIT) ? TASK_INTERRUPTIBLE :
 				TASK_RUNNING;
 
 	tag = percpu_ida_alloc(&se_sess->sess_tag_pool, state);
--- a/lib/percpu_ida.c
+++ b/lib/percpu_ida.c
@@ -148,14 +148,14 @@ static inline unsigned alloc_local_tag(s
  * tag_pool_init()), or otherwise -ENOSPC on allocation failure.
  *
  * Safe to be called from interrupt context (assuming it isn't passed
- * TASK_UNINTERRUPTIBLE, of course).
+ * TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE, of course).
  *
  * @gfp indicates whether or not to wait until a free id is available (it's not
  * used for internal memory allocations); thus if passed __GFP_WAIT we may sleep
  * however long it takes until another thread frees an id (same semantics as a
  * mempool).
  *
- * Will not fail if passed TASK_UNINTERRUPTIBLE.
+ * Will not fail if passed TASK_UNINTERRUPTIBLE | TASK_INTERRUPTIBLE.
  */
 int percpu_ida_alloc(struct percpu_ida *pool, int state)
 {
@@ -205,6 +205,11 @@ int percpu_ida_alloc(struct percpu_ida *
 		if (tag >= 0 || state == TASK_RUNNING)
 			break;
 
+		if (signal_pending_state(state, current)) {
+			tag = -ERESTARTSYS;
+			break;
+		}
+
 		schedule();
 
 		local_irq_save(flags);

[PATCH 3.12 061/107] mm, oom: base root bonus on current usage

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Rientjes <rientjes@google.com>

commit 778c14affaf94a9e4953179d3e13a544ccce7707 upstream.

A 3% of system memory bonus is sometimes too excessive in comparison to
other processes.

With commit a63d83f427fb ("oom: badness heuristic rewrite"), the OOM
killer tries to avoid killing privileged tasks by subtracting 3% of
overall memory (system or cgroup) from their per-task consumption.  But
as a result, all root tasks that consume less than 3% of overall memory
are considered equal, and so it only takes 33+ privileged tasks pushing
the system out of memory for the OOM killer to do something stupid and
kill dhclient or other root-owned processes.  For example, on a 32G
machine it can't tell the difference between the 1M agetty and the 10G
fork bomb member.

The changelog describes this 3% boost as the equivalent to the global
overcommit limit being 3% higher for privileged tasks, but this is not
the same as discounting 3% of overall memory from _every privileged task
individually_ during OOM selection.

Replace the 3% of system memory bonus with a 3% of current memory usage
bonus.

By giving root tasks a bonus that is proportional to their actual size,
they remain comparable even when relatively small.  In the example
above, the OOM killer will discount the 1M agetty's 256 badness points
down to 179, and the 10G fork bomb's 262144 points down to 183500 points
and make the right choice, instead of discounting both to 0 and killing
agetty because it's first in the task list.

Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/filesystems/proc.txt |    4 ++--
 mm/oom_kill.c                      |    2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1376,8 +1376,8 @@ may allocate from based on an estimation
 For example, if a task is using all allowed memory, its badness score will be
 1000.  If it is using half of its allowed memory, its score will be 500.
 
-There is an additional factor included in the badness score: root
-processes are given 3% extra memory over other tasks.
+There is an additional factor included in the badness score: the current memory
+and swap usage is discounted by 3% for root processes.
 
 The amount of "allowed" memory depends on the context in which the oom killer
 was called.  If it is due to the memory assigned to the allocating task's cpuset
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -170,7 +170,7 @@ unsigned long oom_badness(struct task_st
 	 * implementation used by LSMs.
 	 */
 	if (has_capability_noaudit(p, CAP_SYS_ADMIN))
-		adj -= 30;
+		points -= (points * 3) / 100;
 
 	/* Normalize to oom_score_adj units */
 	adj *= totalpages / 1000;

[PATCH 3.12 062/107] media: media: v4l2-dev: fix video device index assignment

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit 6c3df5da67f1f53df78c7e20cd53a481dc28eade upstream.

The side effect of commit 1056e4388b045 ("v4l2-dev: Fix race condition on
__video_register_device") is the increased number of index value assigned
on video_device registration. Before that commit video_devices were
numbered from 0, after it, the indexes starts from 1, because get_index()
always count the device, which is being registered. Some device drivers
rely on video_device index number for internal purposes, i.e. s5p-mfc
driver stopped working after that patch. This patch restores the old method
of numbering the video_device indexes.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Ricardo Ribalda <ricardo.ribalda@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/v4l2-dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-dev.c
+++ b/drivers/media/v4l2-core/v4l2-dev.c
@@ -872,8 +872,8 @@ int __video_register_device(struct video
 
 	/* Should not happen since we thought this minor was free */
 	WARN_ON(video_device[vdev->minor] != NULL);
-	video_device[vdev->minor] = vdev;
 	vdev->index = get_index(vdev);
+	video_device[vdev->minor] = vdev;
 	mutex_unlock(&videodev_lock);
 
 	if (vdev->ioctl_ops)

[PATCH 3.12 063/107] media: anysee: fix non-working E30 Combo Plus DVB-T

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antti Palosaari <crope@iki.fi>

commit c57f87e62368c33ebda11a4993380c8e5a19a5c5 upstream.

PLL was attached twice to frontend0 leaving frontend1 without a tuner.
frontend0 is DVB-C and frontend1 is DVB-T.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/usb/dvb-usb-v2/anysee.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/usb/dvb-usb-v2/anysee.c
+++ b/drivers/media/usb/dvb-usb-v2/anysee.c
@@ -442,6 +442,7 @@ static struct cxd2820r_config anysee_cxd
  * IOD[0] ZL10353 1=enabled
  * IOE[0] tuner 0=enabled
  * tuner is behind ZL10353 I2C-gate
+ * tuner is behind TDA10023 I2C-gate
  *
  * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)"
  * PCB: 508TC (rev0.6)
@@ -956,7 +957,7 @@ static int anysee_tuner_attach(struct dv
 
 		if (fe && adap->fe[1]) {
 			/* attach tuner for 2nd FE */
-			fe = dvb_attach(dvb_pll_attach, adap->fe[0],
+			fe = dvb_attach(dvb_pll_attach, adap->fe[1],
 					(0xc0 >> 1), &d->i2c_adap,
 					DVB_PLL_SAMSUNG_DTOS403IH102A);
 		}

[PATCH 3.12 064/107] [media] dib8000: make 32 bits read atomic

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <m.chehab@samsung.com>

commit 5ac64ba12aca3bef18e61c866583155a3bbf81c4 upstream.

As the dvb-frontend kthread can be called anytime, it can race
with some get status ioctl. So, it seems better to avoid one to
race with the other while reading a 32 bits register.
I can't see any other reason for having a mutex there at I2C, except
to provide such kind of protection, as the I2C core already has a
mutex to protect I2C transfers.

Note: instead of this approach, it could eventually remove the dib8000
specific mutex for it, and either group the 4 ops into one xfer or
to manually control the I2C mutex. The main advantage of the current
approach is that the changes are smaller and more puntual.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/dib8000.c |   33 +++++++++++++++++++++++++--------
 1 file changed, 25 insertions(+), 8 deletions(-)

--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -157,15 +157,10 @@ static u16 dib8000_i2c_read16(struct i2c
 	return ret;
 }
 
-static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
+static u16 __dib8000_read_word(struct dib8000_state *state, u16 reg)
 {
 	u16 ret;
 
-	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
-		dprintk("could not acquire lock");
-		return 0;
-	}
-
 	state->i2c_write_buffer[0] = reg >> 8;
 	state->i2c_write_buffer[1] = reg & 0xff;
 
@@ -183,6 +178,21 @@ static u16 dib8000_read_word(struct dib8
 		dprintk("i2c read error on %d", reg);
 
 	ret = (state->i2c_read_buffer[0] << 8) | state->i2c_read_buffer[1];
+
+	return ret;
+}
+
+static u16 dib8000_read_word(struct dib8000_state *state, u16 reg)
+{
+	u16 ret;
+
+	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock");
+		return 0;
+	}
+
+	ret = __dib8000_read_word(state, reg);
+
 	mutex_unlock(&state->i2c_buffer_lock);
 
 	return ret;
@@ -192,8 +202,15 @@ static u32 dib8000_read32(struct dib8000
 {
 	u16 rw[2];
 
-	rw[0] = dib8000_read_word(state, reg + 0);
-	rw[1] = dib8000_read_word(state, reg + 1);
+	if (mutex_lock_interruptible(&state->i2c_buffer_lock) < 0) {
+		dprintk("could not acquire lock");
+		return 0;
+	}
+
+	rw[0] = __dib8000_read_word(state, reg + 0);
+	rw[1] = __dib8000_read_word(state, reg + 1);
+
+	mutex_unlock(&state->i2c_buffer_lock);
 
 	return ((rw[0] << 16) | (rw[1]));
 }

[PATCH 3.12 065/107] [media] media: s5p_mfc: remove s5p_mfc_get_node_type() function

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@samsung.com>

commit b80cb8dc4162bc954cc71efec192ed89f2061573 upstream.

s5p_mfc_get_node_type() relies on get_index() helper function, which in
turn relies on video_device index numbers assigned on driver
registration. All this code is not really needed, because there is
already access to respective video_device structures via common
s5p_mfc_dev structure. This fixes the issues introduced by patch
1056e4388b0454917a512618c8416a98628fc9ce ("v4l2-dev: Fix race condition
on __video_register_device"), which has been merged in v3.12-rc1.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/platform/s5p-mfc/s5p_mfc.c        |   28 ++++++------------------
 drivers/media/platform/s5p-mfc/s5p_mfc_common.h |    9 -------
 2 files changed, 7 insertions(+), 30 deletions(-)

--- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
@@ -177,21 +177,6 @@ unlock:
 		mutex_unlock(&dev->mfc_mutex);
 }
 
-static enum s5p_mfc_node_type s5p_mfc_get_node_type(struct file *file)
-{
-	struct video_device *vdev = video_devdata(file);
-
-	if (!vdev) {
-		mfc_err("failed to get video_device");
-		return MFCNODE_INVALID;
-	}
-	if (vdev->index == 0)
-		return MFCNODE_DECODER;
-	else if (vdev->index == 1)
-		return MFCNODE_ENCODER;
-	return MFCNODE_INVALID;
-}
-
 static void s5p_mfc_clear_int_flags(struct s5p_mfc_dev *dev)
 {
 	mfc_write(dev, 0, S5P_FIMV_RISC_HOST_INT);
@@ -701,6 +686,7 @@ irq_cleanup_hw:
 /* Open an MFC node */
 static int s5p_mfc_open(struct file *file)
 {
+	struct video_device *vdev = video_devdata(file);
 	struct s5p_mfc_dev *dev = video_drvdata(file);
 	struct s5p_mfc_ctx *ctx = NULL;
 	struct vb2_queue *q;
@@ -738,7 +724,7 @@ static int s5p_mfc_open(struct file *fil
 	/* Mark context as idle */
 	clear_work_bit_irqsave(ctx);
 	dev->ctx[ctx->num] = ctx;
-	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+	if (vdev == dev->vfd_dec) {
 		ctx->type = MFCINST_DECODER;
 		ctx->c_ops = get_dec_codec_ops();
 		s5p_mfc_dec_init(ctx);
@@ -748,7 +734,7 @@ static int s5p_mfc_open(struct file *fil
 			mfc_err("Failed to setup mfc controls\n");
 			goto err_ctrls_setup;
 		}
-	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+	} else if (vdev == dev->vfd_enc) {
 		ctx->type = MFCINST_ENCODER;
 		ctx->c_ops = get_enc_codec_ops();
 		/* only for encoder */
@@ -793,10 +779,10 @@ static int s5p_mfc_open(struct file *fil
 	q = &ctx->vq_dst;
 	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE;
 	q->drv_priv = &ctx->fh;
-	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+	if (vdev == dev->vfd_dec) {
 		q->io_modes = VB2_MMAP;
 		q->ops = get_dec_queue_ops();
-	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+	} else if (vdev == dev->vfd_enc) {
 		q->io_modes = VB2_MMAP | VB2_USERPTR;
 		q->ops = get_enc_queue_ops();
 	} else {
@@ -815,10 +801,10 @@ static int s5p_mfc_open(struct file *fil
 	q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
 	q->io_modes = VB2_MMAP;
 	q->drv_priv = &ctx->fh;
-	if (s5p_mfc_get_node_type(file) == MFCNODE_DECODER) {
+	if (vdev == dev->vfd_dec) {
 		q->io_modes = VB2_MMAP;
 		q->ops = get_dec_queue_ops();
-	} else if (s5p_mfc_get_node_type(file) == MFCNODE_ENCODER) {
+	} else if (vdev == dev->vfd_enc) {
 		q->io_modes = VB2_MMAP | VB2_USERPTR;
 		q->ops = get_enc_queue_ops();
 	} else {
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_common.h
@@ -115,15 +115,6 @@ enum s5p_mfc_fmt_type {
 };
 
 /**
- * enum s5p_mfc_node_type - The type of an MFC device node.
- */
-enum s5p_mfc_node_type {
-	MFCNODE_INVALID = -1,
-	MFCNODE_DECODER = 0,
-	MFCNODE_ENCODER = 1,
-};
-
-/**
  * enum s5p_mfc_inst_type - The type of an MFC instance.
  */
 enum s5p_mfc_inst_type {

[PATCH 3.12 066/107] [media] it913x: Add support for Avermedia H335 id 0x0335

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 17f335c304ac19d9b11814238fe8a7519d80e2ff upstream.

Trivial USB ID addition for Avermedia H335.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-core/dvb-usb-ids.h  |    1 +
 drivers/media/usb/dvb-usb-v2/it913x.c |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/media/dvb-core/dvb-usb-ids.h
+++ b/drivers/media/dvb-core/dvb-usb-ids.h
@@ -239,6 +239,7 @@
 #define USB_PID_AVERMEDIA_A835B_4835			0x4835
 #define USB_PID_AVERMEDIA_1867				0x1867
 #define USB_PID_AVERMEDIA_A867				0xa867
+#define USB_PID_AVERMEDIA_H335				0x0335
 #define USB_PID_AVERMEDIA_TWINSTAR			0x0825
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
 #define USB_PID_TECHNOTREND_CONNECT_S2400_8KEEPROM	0x3009
--- a/drivers/media/usb/dvb-usb-v2/it913x.c
+++ b/drivers/media/usb/dvb-usb-v2/it913x.c
@@ -799,6 +799,9 @@ static const struct usb_device_id it913x
 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2,
 		&it913x_properties, "Digital Dual TV Receiver CTVDIGDUAL_V2",
 			RC_MAP_IT913X_V1) },
+	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335,
+		&it913x_properties, "Avermedia H335",
+			RC_MAP_IT913X_V2) },
 	{}		/* Terminating entry */
 };
 

[PATCH 3.12 067/107] [media] nxt200x: increase write buffer size

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab <m.chehab@samsung.com>

commit fa1e1de6bb679f2c86da3311bbafee7eaf78f125 upstream.

The buffer size on nxt200x is not enough:

	...
	> Dec 20 10:52:04 rich kernel: [   31.747949] nxt200x: nxt200x_writebytes: i2c wr reg=002c: len=255 is too big!
	...

Increase it to 256 bytes.

Reported-by: Rich Freeman <rich0@gentoo.org>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/nxt200x.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/dvb-frontends/nxt200x.c
+++ b/drivers/media/dvb-frontends/nxt200x.c
@@ -40,7 +40,7 @@
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
 /* Max transfer size done by I2C transfer functions */
-#define MAX_XFER_SIZE  64
+#define MAX_XFER_SIZE  256
 
 #define NXT2002_DEFAULT_FIRMWARE "dvb-fe-nxt2002.fw"
 #define NXT2004_DEFAULT_FIRMWARE "dvb-fe-nxt2004.fw"

[PATCH 3.12 068/107] [media] dib8000: fix regression with dib807x

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Olivier Grenie <olivier.grenie@parrot.com>

commit d67350f8c4e67f5eba627e1fd111f16257ca9c95 upstream.

Commit 173a64cb3fcf broke support for some dib807x versions.

Fix it by providing backward compatibility with the older versions.

[mkrufky@linuxtv.org: conflict handling and CodingStyle fixes]

Signed-off-by: Olivier Grenie <olivier.grenie@parrot.com>
Acked-by: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/dib8000.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/media/dvb-frontends/dib8000.c
+++ b/drivers/media/dvb-frontends/dib8000.c
@@ -2462,7 +2462,8 @@ static int dib8000_autosearch_start(stru
 	if (state->revision == 0x8090)
 		internal = dib8000_read32(state, 23) / 1000;
 
-	if (state->autosearch_state == AS_SEARCHING_FFT) {
+	if ((state->revision >= 0x8002) &&
+	    (state->autosearch_state == AS_SEARCHING_FFT)) {
 		dib8000_write_word(state,  37, 0x0065); /* P_ctrl_pha_off_max default values */
 		dib8000_write_word(state, 116, 0x0000); /* P_ana_gain to 0 */
 
@@ -2498,7 +2499,8 @@ static int dib8000_autosearch_start(stru
 		dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (1 << 13)); /* P_restart_ccg = 1 */
 		dib8000_write_word(state, 770, (dib8000_read_word(state, 770) & 0xdfff) | (0 << 13)); /* P_restart_ccg = 0 */
 		dib8000_write_word(state, 0, (dib8000_read_word(state, 0) & 0x7ff) | (0 << 15) | (1 << 13)); /* P_restart_search = 0; */
-	} else if (state->autosearch_state == AS_SEARCHING_GUARD) {
+	} else if ((state->revision >= 0x8002) &&
+		   (state->autosearch_state == AS_SEARCHING_GUARD)) {
 		c->transmission_mode = TRANSMISSION_MODE_8K;
 		c->guard_interval = GUARD_INTERVAL_1_8;
 		c->inversion = 0;
@@ -2600,7 +2602,8 @@ static int dib8000_autosearch_irq(struct
 	struct dib8000_state *state = fe->demodulator_priv;
 	u16 irq_pending = dib8000_read_word(state, 1284);
 
-	if (state->autosearch_state == AS_SEARCHING_FFT) {
+	if ((state->revision >= 0x8002) &&
+	    (state->autosearch_state == AS_SEARCHING_FFT)) {
 		if (irq_pending & 0x1) {
 			dprintk("dib8000_autosearch_irq: max correlation result available");
 			return 3;

[PATCH 3.12 069/107] [media] m88rs2000: add m88rs2000_set_carrieroffset

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit 06af15d1b6f45c60358feab88004472e5428f01c upstream.

Set the carrier offset correctly using the default mclk values.

Add function m88rs2000_get_mclk to calculate the mclk value
against crystal frequency which will later be used for
other functions.

Add function m88rs2000_set_carrieroffset to calculate
and set the offset value.

variable offset becomes a signed value.

Register 0x86 is set the appropriate value according to
remainder value of frequency % 192857 calculation as
shown.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/m88rs2000.c |   77 +++++++++++++++++++++++---------
 drivers/media/dvb-frontends/m88rs2000.h |    2 
 2 files changed, 59 insertions(+), 20 deletions(-)

--- a/drivers/media/dvb-frontends/m88rs2000.c
+++ b/drivers/media/dvb-frontends/m88rs2000.c
@@ -110,6 +110,52 @@ static u8 m88rs2000_readreg(struct m88rs
 	return b1[0];
 }
 
+static u32 m88rs2000_get_mclk(struct dvb_frontend *fe)
+{
+	struct m88rs2000_state *state = fe->demodulator_priv;
+	u32 mclk;
+	u8 reg;
+	/* Must not be 0x00 or 0xff */
+	reg = m88rs2000_readreg(state, 0x86);
+	if (!reg || reg == 0xff)
+		return 0;
+
+	reg /= 2;
+	reg += 1;
+
+	mclk = (u32)(reg * RS2000_FE_CRYSTAL_KHZ + 28 / 2) / 28;
+
+	return mclk;
+}
+
+static int m88rs2000_set_carrieroffset(struct dvb_frontend *fe, s16 offset)
+{
+	struct m88rs2000_state *state = fe->demodulator_priv;
+	u32 mclk;
+	s32 tmp;
+	u8 reg;
+	int ret;
+
+	mclk = m88rs2000_get_mclk(fe);
+	if (!mclk)
+		return -EINVAL;
+
+	tmp = (offset * 4096 + (s32)mclk / 2) / (s32)mclk;
+	if (tmp < 0)
+		tmp += 4096;
+
+	/* Carrier Offset */
+	ret = m88rs2000_writereg(state, 0x9c, (u8)(tmp >> 4));
+
+	reg = m88rs2000_readreg(state, 0x9d);
+	reg &= 0xf;
+	reg |= (u8)(tmp & 0xf) << 4;
+
+	ret |= m88rs2000_writereg(state, 0x9d, reg);
+
+	return ret;
+}
+
 static int m88rs2000_set_symbolrate(struct dvb_frontend *fe, u32 srate)
 {
 	struct m88rs2000_state *state = fe->demodulator_priv;
@@ -540,9 +586,8 @@ static int m88rs2000_set_frontend(struct
 	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
 	fe_status_t status;
 	int i, ret = 0;
-	s32 tmp;
 	u32 tuner_freq;
-	u16 offset = 0;
+	s16 offset = 0;
 	u8 reg;
 
 	state->no_lock_count = 0;
@@ -567,26 +612,18 @@ static int m88rs2000_set_frontend(struct
 	if (ret < 0)
 		return -ENODEV;
 
-	offset = tuner_freq - c->frequency;
+	offset = (s16)((s32)tuner_freq - c->frequency);
 
-	/* calculate offset assuming 96000kHz*/
-	tmp = offset;
-	tmp *= 65536;
-
-	tmp = (2 * tmp + 96000) / (2 * 96000);
-	if (tmp < 0)
-		tmp += 65536;
-
-	offset = tmp & 0xffff;
-
-	ret = m88rs2000_writereg(state, 0x9a, 0x30);
-	/* Unknown usually 0xc6 sometimes 0xc1 */
-	reg = m88rs2000_readreg(state, 0x86);
-	ret |= m88rs2000_writereg(state, 0x86, reg);
-	/* Offset lower nibble always 0 */
-	ret |= m88rs2000_writereg(state, 0x9c, (offset >> 8));
-	ret |= m88rs2000_writereg(state, 0x9d, offset & 0xf0);
+	/* default mclk value 96.4285 * 2 * 1000 = 192857 */
+	if (((c->frequency % 192857) >= (192857 - 3000)) ||
+				(c->frequency % 192857) <= 3000)
+		ret = m88rs2000_writereg(state, 0x86, 0xc2);
+	else
+		ret = m88rs2000_writereg(state, 0x86, 0xc6);
 
+	ret |= m88rs2000_set_carrieroffset(fe, offset);
+	if (ret < 0)
+		return -ENODEV;
 
 	/* Reset Demod */
 	ret = m88rs2000_tab_set(state, fe_reset);
--- a/drivers/media/dvb-frontends/m88rs2000.h
+++ b/drivers/media/dvb-frontends/m88rs2000.h
@@ -53,6 +53,8 @@ static inline struct dvb_frontend *m88rs
 }
 #endif /* CONFIG_DVB_M88RS2000 */
 
+#define RS2000_FE_CRYSTAL_KHZ 27000
+
 enum {
 	DEMOD_WRITE = 0x1,
 	WRITE_DELAY = 0x10,

[PATCH 3.12 070/107] [media] m88rs2000: set symbol rate accurately

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Malcolm Priestley <tvboxspy@gmail.com>

commit dd4491dfb9eb4fa3bfa7dc73ba989e69fbce2e10 upstream.

Current setting of symbol rate is not very actuate causing
loss of lock.

Covert temp to u64 and use mclk to calculate from big number.

Calculate symbol rate by dividing symbol rate by 1000 times
1 << 24 and dividing sum by mclk.

Add other symbol rate settings to function registers 0xa0-0xa3.

In set_frontend add changes to register 0xf1 this must be done
prior call to fe_reset. Register 0x00 doesn't need a second
write of 0x1

Applied after patch
m88rs2000: add m88rs2000_set_carrieroffset

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/dvb-frontends/m88rs2000.c |   42 +++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 11 deletions(-)

--- a/drivers/media/dvb-frontends/m88rs2000.c
+++ b/drivers/media/dvb-frontends/m88rs2000.c
@@ -160,24 +160,44 @@ static int m88rs2000_set_symbolrate(stru
 {
 	struct m88rs2000_state *state = fe->demodulator_priv;
 	int ret;
-	u32 temp;
+	u64 temp;
+	u32 mclk;
 	u8 b[3];
 
 	if ((srate < 1000000) || (srate > 45000000))
 		return -EINVAL;
 
+	mclk = m88rs2000_get_mclk(fe);
+	if (!mclk)
+		return -EINVAL;
+
 	temp = srate / 1000;
-	temp *= 11831;
-	temp /= 68;
-	temp -= 3;
+	temp *= 1 << 24;
+
+	do_div(temp, mclk);
 
 	b[0] = (u8) (temp >> 16) & 0xff;
 	b[1] = (u8) (temp >> 8) & 0xff;
 	b[2] = (u8) temp & 0xff;
+
 	ret = m88rs2000_writereg(state, 0x93, b[2]);
 	ret |= m88rs2000_writereg(state, 0x94, b[1]);
 	ret |= m88rs2000_writereg(state, 0x95, b[0]);
 
+	if (srate > 10000000)
+		ret |= m88rs2000_writereg(state, 0xa0, 0x20);
+	else
+		ret |= m88rs2000_writereg(state, 0xa0, 0x60);
+
+	ret |= m88rs2000_writereg(state, 0xa1, 0xe0);
+
+	if (srate > 12000000)
+		ret |= m88rs2000_writereg(state, 0xa3, 0x20);
+	else if (srate > 2800000)
+		ret |= m88rs2000_writereg(state, 0xa3, 0x98);
+	else
+		ret |= m88rs2000_writereg(state, 0xa3, 0x90);
+
 	deb_info("m88rs2000: m88rs2000_set_symbolrate\n");
 	return ret;
 }
@@ -307,8 +327,6 @@ struct inittab m88rs2000_shutdown[] = {
 
 struct inittab fe_reset[] = {
 	{DEMOD_WRITE, 0x00, 0x01},
-	{DEMOD_WRITE, 0xf1, 0xbf},
-	{DEMOD_WRITE, 0x00, 0x01},
 	{DEMOD_WRITE, 0x20, 0x81},
 	{DEMOD_WRITE, 0x21, 0x80},
 	{DEMOD_WRITE, 0x10, 0x33},
@@ -351,9 +369,6 @@ struct inittab fe_trigger[] = {
 	{DEMOD_WRITE, 0x9b, 0x64},
 	{DEMOD_WRITE, 0x9e, 0x00},
 	{DEMOD_WRITE, 0x9f, 0xf8},
-	{DEMOD_WRITE, 0xa0, 0x20},
-	{DEMOD_WRITE, 0xa1, 0xe0},
-	{DEMOD_WRITE, 0xa3, 0x38},
 	{DEMOD_WRITE, 0x98, 0xff},
 	{DEMOD_WRITE, 0xc0, 0x0f},
 	{DEMOD_WRITE, 0x89, 0x01},
@@ -625,8 +640,13 @@ static int m88rs2000_set_frontend(struct
 	if (ret < 0)
 		return -ENODEV;
 
-	/* Reset Demod */
-	ret = m88rs2000_tab_set(state, fe_reset);
+	/* Reset demod by symbol rate */
+	if (c->symbol_rate > 27500000)
+		ret = m88rs2000_writereg(state, 0xf1, 0xa4);
+	else
+		ret = m88rs2000_writereg(state, 0xf1, 0xbf);
+
+	ret |= m88rs2000_tab_set(state, fe_reset);
 	if (ret < 0)
 		return -ENODEV;
 

[PATCH 3.12 072/107] drm/radeon: disable ss on DP for DCE3.x

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit d8e24525094200601236fa64a54cf73e3d682f2e upstream.

Seems to cause problems with certain DP monitors.

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=40699

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/atombios_crtc.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -938,11 +938,14 @@ static bool atombios_crtc_prepare_pll(st
 							radeon_atombios_get_ppll_ss_info(rdev,
 											 &radeon_crtc->ss,
 											 ATOM_DP_SS_ID1);
-				} else
+				} else {
 					radeon_crtc->ss_enabled =
 						radeon_atombios_get_ppll_ss_info(rdev,
 										 &radeon_crtc->ss,
 										 ATOM_DP_SS_ID1);
+				}
+				/* disable spread spectrum on DCE3 DP */
+				radeon_crtc->ss_enabled = false;
 			}
 			break;
 		case ATOM_ENCODER_MODE_LVDS:

[PATCH 3.12 073/107] drm/radeon: fix surface sync in fence on cayman (v2)

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 10e9ffae463396c5a25fdfe8a48d7c98a87f6b85 upstream.

We need to set the engine bit to select the ME and
also set the full cache bit.  Should help stability
on TN and cayman.

V2: fix up surface sync in ib execute as well

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/ni.c  |   16 +++++++---------
 drivers/gpu/drm/radeon/nid.h |    1 +
 2 files changed, 8 insertions(+), 9 deletions(-)

--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -1335,13 +1335,12 @@ void cayman_fence_ring_emit(struct radeo
 {
 	struct radeon_ring *ring = &rdev->ring[fence->ring];
 	u64 addr = rdev->fence_drv[fence->ring].gpu_addr;
+	u32 cp_coher_cntl = PACKET3_FULL_CACHE_ENA | PACKET3_TC_ACTION_ENA |
+		PACKET3_SH_ACTION_ENA;
 
 	/* flush read cache over gart for this vmid */
-	radeon_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1));
-	radeon_ring_write(ring, (CP_COHER_CNTL2 - PACKET3_SET_CONFIG_REG_START) >> 2);
-	radeon_ring_write(ring, 0);
 	radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
-	radeon_ring_write(ring, PACKET3_TC_ACTION_ENA | PACKET3_SH_ACTION_ENA);
+	radeon_ring_write(ring, PACKET3_ENGINE_ME | cp_coher_cntl);
 	radeon_ring_write(ring, 0xFFFFFFFF);
 	radeon_ring_write(ring, 0);
 	radeon_ring_write(ring, 10); /* poll interval */
@@ -1357,6 +1356,8 @@ void cayman_fence_ring_emit(struct radeo
 void cayman_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib)
 {
 	struct radeon_ring *ring = &rdev->ring[ib->ring];
+	u32 cp_coher_cntl = PACKET3_FULL_CACHE_ENA | PACKET3_TC_ACTION_ENA |
+		PACKET3_SH_ACTION_ENA;
 
 	/* set to DX10/11 mode */
 	radeon_ring_write(ring, PACKET3(PACKET3_MODE_CONTROL, 0));
@@ -1381,14 +1382,11 @@ void cayman_ring_ib_execute(struct radeo
 			  (ib->vm ? (ib->vm->id << 24) : 0));
 
 	/* flush read cache over gart for this vmid */
-	radeon_ring_write(ring, PACKET3(PACKET3_SET_CONFIG_REG, 1));
-	radeon_ring_write(ring, (CP_COHER_CNTL2 - PACKET3_SET_CONFIG_REG_START) >> 2);
-	radeon_ring_write(ring, ib->vm ? ib->vm->id : 0);
 	radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
-	radeon_ring_write(ring, PACKET3_TC_ACTION_ENA | PACKET3_SH_ACTION_ENA);
+	radeon_ring_write(ring, PACKET3_ENGINE_ME | cp_coher_cntl);
 	radeon_ring_write(ring, 0xFFFFFFFF);
 	radeon_ring_write(ring, 0);
-	radeon_ring_write(ring, 10); /* poll interval */
+	radeon_ring_write(ring, ((ib->vm ? ib->vm->id : 0) << 24) | 10); /* poll interval */
 }
 
 static void cayman_cp_enable(struct radeon_device *rdev, bool enable)
--- a/drivers/gpu/drm/radeon/nid.h
+++ b/drivers/gpu/drm/radeon/nid.h
@@ -1154,6 +1154,7 @@
 #              define PACKET3_DB_ACTION_ENA        (1 << 26)
 #              define PACKET3_SH_ACTION_ENA        (1 << 27)
 #              define PACKET3_SX_ACTION_ENA        (1 << 28)
+#              define PACKET3_ENGINE_ME            (1 << 31)
 #define	PACKET3_ME_INITIALIZE				0x44
 #define		PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16)
 #define	PACKET3_COND_WRITE				0x45

[PATCH 3.12 074/107] drm/radeon: set the full cache bit for fences on r7xx+

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit d45b964a22cad962d3ede1eba8d24f5cee7b2a92 upstream.

Needed to properly flush the read caches for fences.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/r600.c  |   13 +++++++------
 drivers/gpu/drm/radeon/r600d.h |    1 +
 2 files changed, 8 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2554,14 +2554,17 @@ void r600_fence_ring_emit(struct radeon_
 			  struct radeon_fence *fence)
 {
 	struct radeon_ring *ring = &rdev->ring[fence->ring];
+	u32 cp_coher_cntl = PACKET3_TC_ACTION_ENA | PACKET3_VC_ACTION_ENA |
+		PACKET3_SH_ACTION_ENA;
+
+	if (rdev->family >= CHIP_RV770)
+		cp_coher_cntl |= PACKET3_FULL_CACHE_ENA;
 
 	if (rdev->wb.use_event) {
 		u64 addr = rdev->fence_drv[fence->ring].gpu_addr;
 		/* flush read cache over gart */
 		radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
-		radeon_ring_write(ring, PACKET3_TC_ACTION_ENA |
-					PACKET3_VC_ACTION_ENA |
-					PACKET3_SH_ACTION_ENA);
+		radeon_ring_write(ring, cp_coher_cntl);
 		radeon_ring_write(ring, 0xFFFFFFFF);
 		radeon_ring_write(ring, 0);
 		radeon_ring_write(ring, 10); /* poll interval */
@@ -2575,9 +2578,7 @@ void r600_fence_ring_emit(struct radeon_
 	} else {
 		/* flush read cache over gart */
 		radeon_ring_write(ring, PACKET3(PACKET3_SURFACE_SYNC, 3));
-		radeon_ring_write(ring, PACKET3_TC_ACTION_ENA |
-					PACKET3_VC_ACTION_ENA |
-					PACKET3_SH_ACTION_ENA);
+		radeon_ring_write(ring, cp_coher_cntl);
 		radeon_ring_write(ring, 0xFFFFFFFF);
 		radeon_ring_write(ring, 0);
 		radeon_ring_write(ring, 10); /* poll interval */
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -1547,6 +1547,7 @@
 #              define PACKET3_CP_DMA_CMD_DAIC      (1 << 29)
 #define	PACKET3_SURFACE_SYNC				0x43
 #              define PACKET3_CB0_DEST_BASE_ENA    (1 << 6)
+#              define PACKET3_FULL_CACHE_ENA       (1 << 20) /* r7xx+ only */
 #              define PACKET3_TC_ACTION_ENA        (1 << 23)
 #              define PACKET3_VC_ACTION_ENA        (1 << 24)
 #              define PACKET3_CB_ACTION_ENA        (1 << 25)

[PATCH 3.12 075/107] drm/radeon: add UVD support for OLAND

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 5d029339bb8ce69aeb68280c3de67d3cea456146 upstream.

It seems this got dropped when we merged UVD support
last year.  Add this back now.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_uvd.c |    1 +
 drivers/gpu/drm/radeon/uvd_v2_2.c   |    1 +
 2 files changed, 2 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -91,6 +91,7 @@ int radeon_uvd_init(struct radeon_device
 	case CHIP_VERDE:
 	case CHIP_PITCAIRN:
 	case CHIP_ARUBA:
+	case CHIP_OLAND:
 		fw_name = FIRMWARE_TAHITI;
 		break;
 
--- a/drivers/gpu/drm/radeon/uvd_v2_2.c
+++ b/drivers/gpu/drm/radeon/uvd_v2_2.c
@@ -153,6 +153,7 @@ int uvd_v2_2_resume(struct radeon_device
 		chip_id = 0x01000015;
 		break;
 	case CHIP_PITCAIRN:
+	case CHIP_OLAND:
 		chip_id = 0x01000016;
 		break;
 	case CHIP_ARUBA:

[PATCH 3.12 076/107] drm/radeon: fix DAC interrupt handling on DCE5+

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit e9a321c6b2ac954a7dbf235f419c255a424a1273 upstream.

DCE5 and newer hardware only has 1 DAC.  Use the correct
offset.  This may fix display problems on certain board
configurations.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c |    4 ++--
 drivers/gpu/drm/radeon/si.c        |    2 +-
 drivers/gpu/drm/radeon/sid.h       |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4249,8 +4249,8 @@ void evergreen_disable_interrupt_state(s
 		WREG32(GRPH_INT_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, 0);
 	}
 
-	/* only one DAC on DCE6 */
-	if (!ASIC_IS_DCE6(rdev))
+	/* only one DAC on DCE5 */
+	if (!ASIC_IS_DCE5(rdev))
 		WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
 	WREG32(DACB_AUTODETECT_INT_CONTROL, 0);
 
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5625,7 +5625,7 @@ static void si_disable_interrupt_state(s
 	}
 
 	if (!ASIC_IS_NODCE(rdev)) {
-		WREG32(DACA_AUTODETECT_INT_CONTROL, 0);
+		WREG32(DAC_AUTODETECT_INT_CONTROL, 0);
 
 		tmp = RREG32(DC_HPD1_INT_CONTROL) & DC_HPDx_INT_POLARITY;
 		WREG32(DC_HPD1_INT_CONTROL, tmp);
--- a/drivers/gpu/drm/radeon/sid.h
+++ b/drivers/gpu/drm/radeon/sid.h
@@ -770,7 +770,7 @@
 #       define GRPH_PFLIP_INT_MASK                      (1 << 0)
 #       define GRPH_PFLIP_INT_TYPE                      (1 << 8)
 
-#define	DACA_AUTODETECT_INT_CONTROL			0x66c8
+#define	DAC_AUTODETECT_INT_CONTROL			0x67c8
 
 #define DC_HPD1_INT_STATUS                              0x601c
 #define DC_HPD2_INT_STATUS                              0x6028

[PATCH 3.12 077/107] drm/radeon/DCE4+: clear bios scratch dpms bit (v2)

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 6802d4bad83f50081b2788698570218aaff8d10e upstream.

The BlankCrtc table in some DCE8 boards has some
logic shortcuts for the vbios when this bit is set.
Clear it for driver use.

v2: fix typo

Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_atombios.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -3944,6 +3944,10 @@ void radeon_atom_initialize_bios_scratch
 	/* tell the bios not to handle mode switching */
 	bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH;
 
+	/* clear the vbios dpms state */
+	if (ASIC_IS_DCE4(rdev))
+		bios_2_scratch &= ~ATOM_S2_DEVICE_DPMS_STATE;
+
 	if (rdev->family >= CHIP_R600) {
 		WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch);
 		WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch);

[PATCH 3.12 078/107] drm/radeon/dce8: workaround for atom BlankCrtc table

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 78fe9e545ce6d510b979dc2d8e14096a279fc519 upstream.

Some DCE8 boards have a funky BlankCrtc table that results
in a timeout when trying to blank the display.  The
timeout is harmless (all operations needed from the table
are complete), but wastes time and is confusing to users so
work around it.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=73420

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/atombios_crtc.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -209,6 +209,16 @@ static void atombios_enable_crtc_memreq(
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 }
 
+static const u32 vga_control_regs[6] =
+{
+	AVIVO_D1VGA_CONTROL,
+	AVIVO_D2VGA_CONTROL,
+	EVERGREEN_D3VGA_CONTROL,
+	EVERGREEN_D4VGA_CONTROL,
+	EVERGREEN_D5VGA_CONTROL,
+	EVERGREEN_D6VGA_CONTROL,
+};
+
 static void atombios_blank_crtc(struct drm_crtc *crtc, int state)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -216,13 +226,23 @@ static void atombios_blank_crtc(struct d
 	struct radeon_device *rdev = dev->dev_private;
 	int index = GetIndexIntoMasterTable(COMMAND, BlankCRTC);
 	BLANK_CRTC_PS_ALLOCATION args;
+	u32 vga_control = 0;
 
 	memset(&args, 0, sizeof(args));
 
+	if (ASIC_IS_DCE8(rdev)) {
+		vga_control = RREG32(vga_control_regs[radeon_crtc->crtc_id]);
+		WREG32(vga_control_regs[radeon_crtc->crtc_id], vga_control | 1);
+	}
+
 	args.ucCRTC = radeon_crtc->crtc_id;
 	args.ucBlanking = state;
 
 	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+
+	if (ASIC_IS_DCE8(rdev)) {
+		WREG32(vga_control_regs[radeon_crtc->crtc_id], vga_control);
+	}
 }
 
 static void atombios_powergate_crtc(struct drm_crtc *crtc, int state)

[PATCH 3.12 079/107] dm sysfs: fix a module unload race

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 2995fa78e423d7193f3b57835f6c1c75006a0315 upstream.

This reverts commit be35f48610 ("dm: wait until embedded kobject is
released before destroying a device") and provides an improved fix.

The kobject release code that calls the completion must be placed in a
non-module file, otherwise there is a module unload race (if the process
calling dm_kobject_release is preempted and the DM module unloaded after
the completion is triggered, but before dm_kobject_release returns).

To fix this race, this patch moves the completion code to dm-builtin.c
which is always compiled directly into the kernel if BLK_DEV_DM is
selected.

The patch introduces a new dm_kobject_holder structure, its purpose is
to keep the completion and kobject in one place, so that it can be
accessed from non-module code without the need to export the layout of
struct mapped_device to that code.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/md/Kconfig      |    4 ++++
 drivers/md/Makefile     |    1 +
 drivers/md/dm-builtin.c |   48 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/md/dm-sysfs.c   |    5 -----
 drivers/md/dm.c         |   26 +++++---------------------
 drivers/md/dm.h         |   17 ++++++++++++++++-
 6 files changed, 74 insertions(+), 27 deletions(-)

--- a/drivers/md/Kconfig
+++ b/drivers/md/Kconfig
@@ -176,8 +176,12 @@ config MD_FAULTY
 
 source "drivers/md/bcache/Kconfig"
 
+config BLK_DEV_DM_BUILTIN
+	boolean
+
 config BLK_DEV_DM
 	tristate "Device mapper support"
+	select BLK_DEV_DM_BUILTIN
 	---help---
 	  Device-mapper is a low level volume manager.  It works by allowing
 	  people to specify mappings for ranges of logical sectors.  Various
--- a/drivers/md/Makefile
+++ b/drivers/md/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_MD_FAULTY)		+= faulty.o
 obj-$(CONFIG_BCACHE)		+= bcache/
 obj-$(CONFIG_BLK_DEV_MD)	+= md-mod.o
 obj-$(CONFIG_BLK_DEV_DM)	+= dm-mod.o
+obj-$(CONFIG_BLK_DEV_DM_BUILTIN) += dm-builtin.o
 obj-$(CONFIG_DM_BUFIO)		+= dm-bufio.o
 obj-$(CONFIG_DM_BIO_PRISON)	+= dm-bio-prison.o
 obj-$(CONFIG_DM_CRYPT)		+= dm-crypt.o
--- /dev/null
+++ b/drivers/md/dm-builtin.c
@@ -0,0 +1,48 @@
+#include "dm.h"
+
+/*
+ * The kobject release method must not be placed in the module itself,
+ * otherwise we are subject to module unload races.
+ *
+ * The release method is called when the last reference to the kobject is
+ * dropped. It may be called by any other kernel code that drops the last
+ * reference.
+ *
+ * The release method suffers from module unload race. We may prevent the
+ * module from being unloaded at the start of the release method (using
+ * increased module reference count or synchronizing against the release
+ * method), however there is no way to prevent the module from being
+ * unloaded at the end of the release method.
+ *
+ * If this code were placed in the dm module, the following race may
+ * happen:
+ *  1. Some other process takes a reference to dm kobject
+ *  2. The user issues ioctl function to unload the dm device
+ *  3. dm_sysfs_exit calls kobject_put, however the object is not released
+ *     because of the other reference taken at step 1
+ *  4. dm_sysfs_exit waits on the completion
+ *  5. The other process that took the reference in step 1 drops it,
+ *     dm_kobject_release is called from this process
+ *  6. dm_kobject_release calls complete()
+ *  7. a reschedule happens before dm_kobject_release returns
+ *  8. dm_sysfs_exit continues, the dm device is unloaded, module reference
+ *     count is decremented
+ *  9. The user unloads the dm module
+ * 10. The other process that was rescheduled in step 7 continues to run,
+ *     it is now executing code in unloaded module, so it crashes
+ *
+ * Note that if the process that takes the foreign reference to dm kobject
+ * has a low priority and the system is sufficiently loaded with
+ * higher-priority processes that prevent the low-priority process from
+ * being scheduled long enough, this bug may really happen.
+ *
+ * In order to fix this module unload race, we place the release method
+ * into a helper code that is compiled directly into the kernel.
+ */
+
+void dm_kobject_release(struct kobject *kobj)
+{
+	complete(dm_get_completion_from_kobject(kobj));
+}
+
+EXPORT_SYMBOL(dm_kobject_release);
--- a/drivers/md/dm-sysfs.c
+++ b/drivers/md/dm-sysfs.c
@@ -79,11 +79,6 @@ static const struct sysfs_ops dm_sysfs_o
 	.show	= dm_attr_show,
 };
 
-static void dm_kobject_release(struct kobject *kobj)
-{
-	complete(dm_get_completion_from_kobject(kobj));
-}
-
 /*
  * dm kobject is embedded in mapped_device structure
  * no need to define release function here
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -194,11 +194,8 @@ struct mapped_device {
 	/* forced geometry settings */
 	struct hd_geometry geometry;
 
-	/* sysfs handle */
-	struct kobject kobj;
-
-	/* wait until the kobject is released */
-	struct completion kobj_completion;
+	/* kobject and completion */
+	struct dm_kobject_holder kobj_holder;
 
 	/* zero-length flush that will be cloned and submitted to targets */
 	struct bio flush_bio;
@@ -2008,7 +2005,7 @@ static struct mapped_device *alloc_dev(i
 	init_waitqueue_head(&md->wait);
 	INIT_WORK(&md->work, dm_wq_work);
 	init_waitqueue_head(&md->eventq);
-	init_completion(&md->kobj_completion);
+	init_completion(&md->kobj_holder.completion);
 
 	md->disk->major = _major;
 	md->disk->first_minor = minor;
@@ -2870,20 +2867,14 @@ struct gendisk *dm_disk(struct mapped_de
 
 struct kobject *dm_kobject(struct mapped_device *md)
 {
-	return &md->kobj;
+	return &md->kobj_holder.kobj;
 }
 
-/*
- * struct mapped_device should not be exported outside of dm.c
- * so use this check to verify that kobj is part of md structure
- */
 struct mapped_device *dm_get_from_kobject(struct kobject *kobj)
 {
 	struct mapped_device *md;
 
-	md = container_of(kobj, struct mapped_device, kobj);
-	if (&md->kobj != kobj)
-		return NULL;
+	md = container_of(kobj, struct mapped_device, kobj_holder.kobj);
 
 	if (test_bit(DMF_FREEING, &md->flags) ||
 	    dm_deleting_md(md))
@@ -2893,13 +2884,6 @@ struct mapped_device *dm_get_from_kobjec
 	return md;
 }
 
-struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
-{
-	struct mapped_device *md = container_of(kobj, struct mapped_device, kobj);
-
-	return &md->kobj_completion;
-}
-
 int dm_suspended_md(struct mapped_device *md)
 {
 	return test_bit(DMF_SUSPENDED, &md->flags);
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -16,6 +16,7 @@
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/completion.h>
+#include <linux/kobject.h>
 
 #include "dm-stats.h"
 
@@ -139,11 +140,25 @@ void dm_interface_exit(void);
 /*
  * sysfs interface
  */
+struct dm_kobject_holder {
+	struct kobject kobj;
+	struct completion completion;
+};
+
+static inline struct completion *dm_get_completion_from_kobject(struct kobject *kobj)
+{
+	return &container_of(kobj, struct dm_kobject_holder, kobj)->completion;
+}
+
 int dm_sysfs_init(struct mapped_device *md);
 void dm_sysfs_exit(struct mapped_device *md);
 struct kobject *dm_kobject(struct mapped_device *md);
 struct mapped_device *dm_get_from_kobject(struct kobject *kobj);
-struct completion *dm_get_completion_from_kobject(struct kobject *kobj);
+
+/*
+ * The kobject helper
+ */
+void dm_kobject_release(struct kobject *kobj);
 
 /*
  * Targets for linear and striped mappings

[PATCH 3.12 080/107] drm/nouveau: fix m2mf copy to tiled gart

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maarten Lankhorst <maarten.lankhorst@canonical.com>

commit ce8f7699f2b6ffe4aa8368b8d9d370875accaa5f upstream.

Commit de7b7d59d54852c introduced tiled GART, but a linear copy is
still performed. This may result in errors on eviction, fix it by
checking tiling from memtype.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/nouveau_bo.c |   33 ++++++++-------------------------
 1 file changed, 8 insertions(+), 25 deletions(-)

--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -802,25 +802,25 @@ nv50_bo_move_m2mf(struct nouveau_channel
 		  struct ttm_mem_reg *old_mem, struct ttm_mem_reg *new_mem)
 {
 	struct nouveau_mem *node = old_mem->mm_node;
-	struct nouveau_bo *nvbo = nouveau_bo(bo);
 	u64 length = (new_mem->num_pages << PAGE_SHIFT);
 	u64 src_offset = node->vma[0].offset;
 	u64 dst_offset = node->vma[1].offset;
+	int src_tiled = !!node->memtype;
+	int dst_tiled = !!((struct nouveau_mem *)new_mem->mm_node)->memtype;
 	int ret;
 
 	while (length) {
 		u32 amount, stride, height;
 
+		ret = RING_SPACE(chan, 18 + 6 * (src_tiled + dst_tiled));
+		if (ret)
+			return ret;
+
 		amount  = min(length, (u64)(4 * 1024 * 1024));
 		stride  = 16 * 4;
 		height  = amount / stride;
 
-		if (old_mem->mem_type == TTM_PL_VRAM &&
-		    nouveau_bo_tile_layout(nvbo)) {
-			ret = RING_SPACE(chan, 8);
-			if (ret)
-				return ret;
-
+		if (src_tiled) {
 			BEGIN_NV04(chan, NvSubCopy, 0x0200, 7);
 			OUT_RING  (chan, 0);
 			OUT_RING  (chan, 0);
@@ -830,19 +830,10 @@ nv50_bo_move_m2mf(struct nouveau_channel
 			OUT_RING  (chan, 0);
 			OUT_RING  (chan, 0);
 		} else {
-			ret = RING_SPACE(chan, 2);
-			if (ret)
-				return ret;
-
 			BEGIN_NV04(chan, NvSubCopy, 0x0200, 1);
 			OUT_RING  (chan, 1);
 		}
-		if (new_mem->mem_type == TTM_PL_VRAM &&
-		    nouveau_bo_tile_layout(nvbo)) {
-			ret = RING_SPACE(chan, 8);
-			if (ret)
-				return ret;
-
+		if (dst_tiled) {
 			BEGIN_NV04(chan, NvSubCopy, 0x021c, 7);
 			OUT_RING  (chan, 0);
 			OUT_RING  (chan, 0);
@@ -852,18 +843,10 @@ nv50_bo_move_m2mf(struct nouveau_channel
 			OUT_RING  (chan, 0);
 			OUT_RING  (chan, 0);
 		} else {
-			ret = RING_SPACE(chan, 2);
-			if (ret)
-				return ret;
-
 			BEGIN_NV04(chan, NvSubCopy, 0x021c, 1);
 			OUT_RING  (chan, 1);
 		}
 
-		ret = RING_SPACE(chan, 14);
-		if (ret)
-			return ret;
-
 		BEGIN_NV04(chan, NvSubCopy, 0x0238, 2);
 		OUT_RING  (chan, upper_32_bits(src_offset));
 		OUT_RING  (chan, upper_32_bits(dst_offset));

[PATCH 3.12 081/107] drm/nouveau/falcon: use vmalloc to create firwmare copies

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilia Mirkin <imirkin@alum.mit.edu>

commit 90d6db1635d5e225623af2e2e859feb607345287 upstream.

Some firmware images may be large (64K), so using kmalloc memory is
inappropriate for them. Use vmalloc instead, to avoid high-order
allocation failures.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/nouveau/core/engine/falcon.c |   20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

--- a/drivers/gpu/drm/nouveau/core/engine/falcon.c
+++ b/drivers/gpu/drm/nouveau/core/engine/falcon.c
@@ -56,6 +56,16 @@ _nouveau_falcon_wr32(struct nouveau_obje
 	nv_wr32(falcon, falcon->addr + addr, data);
 }
 
+static void *
+vmemdup(const void *src, size_t len)
+{
+	void *p = vmalloc(len);
+
+	if (p)
+		memcpy(p, src, len);
+	return p;
+}
+
 int
 _nouveau_falcon_init(struct nouveau_object *object)
 {
@@ -111,7 +121,7 @@ _nouveau_falcon_init(struct nouveau_obje
 
 		ret = request_firmware(&fw, name, &device->pdev->dev);
 		if (ret == 0) {
-			falcon->code.data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+			falcon->code.data = vmemdup(fw->data, fw->size);
 			falcon->code.size = fw->size;
 			falcon->data.data = NULL;
 			falcon->data.size = 0;
@@ -134,7 +144,7 @@ _nouveau_falcon_init(struct nouveau_obje
 			return ret;
 		}
 
-		falcon->data.data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+		falcon->data.data = vmemdup(fw->data, fw->size);
 		falcon->data.size = fw->size;
 		release_firmware(fw);
 		if (!falcon->data.data)
@@ -149,7 +159,7 @@ _nouveau_falcon_init(struct nouveau_obje
 			return ret;
 		}
 
-		falcon->code.data = kmemdup(fw->data, fw->size, GFP_KERNEL);
+		falcon->code.data = vmemdup(fw->data, fw->size);
 		falcon->code.size = fw->size;
 		release_firmware(fw);
 		if (!falcon->code.data)
@@ -235,8 +245,8 @@ _nouveau_falcon_fini(struct nouveau_obje
 	if (!suspend) {
 		nouveau_gpuobj_ref(NULL, &falcon->core);
 		if (falcon->external) {
-			kfree(falcon->data.data);
-			kfree(falcon->code.data);
+			vfree(falcon->data.data);
+			vfree(falcon->code.data);
 			falcon->code.data = NULL;
 		}
 	}

[PATCH 3.12 082/107] drm/i915: Flush outstanding requests before allocating new seqno

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 304d695c3dc8eb65206b9eaf16f8d1a41510d1cf upstream.

In very rare cases (such as a memory failure stress test) it is possible
to fill the entire ring without emitting a request. Under this
circumstance, the outstanding request is flushed and waited upon. After
space on the ring is cleared, we return to emitting the new command -
except that we just cleared the seqno allocated for this operation and
trigger the sanity check that a request is only ever emitted with a
valid seqno. The fix is to rearrange the code to make sure the
allocation of the seqno for this operation is after any required flushes
of outstanding operations.

The bug exists since the preallocation was introduced in
commit 9d7730914f4cd496e356acfab95b41075aa8eae8
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Nov 27 16:22:52 2012 +0000

    drm/i915: Preallocate next seqno before touching the ring

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_ringbuffer.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1501,8 +1501,8 @@ intel_ring_alloc_seqno(struct intel_ring
 	return i915_gem_get_seqno(ring->dev, &ring->outstanding_lazy_request);
 }
 
-static int __intel_ring_begin(struct intel_ring_buffer *ring,
-			      int bytes)
+static int __intel_ring_prepare(struct intel_ring_buffer *ring,
+				int bytes)
 {
 	int ret;
 
@@ -1518,7 +1518,6 @@ static int __intel_ring_begin(struct int
 			return ret;
 	}
 
-	ring->space -= bytes;
 	return 0;
 }
 
@@ -1533,12 +1532,17 @@ int intel_ring_begin(struct intel_ring_b
 	if (ret)
 		return ret;
 
+	ret = __intel_ring_prepare(ring, num_dwords * sizeof(uint32_t));
+	if (ret)
+		return ret;
+
 	/* Preallocate the olr before touching the ring */
 	ret = intel_ring_alloc_seqno(ring);
 	if (ret)
 		return ret;
 
-	return __intel_ring_begin(ring, num_dwords * sizeof(uint32_t));
+	ring->space -= num_dwords * sizeof(uint32_t);
+	return 0;
 }
 
 void intel_ring_init_seqno(struct intel_ring_buffer *ring, u32 seqno)

[PATCH 3.12 083/107] drm/i915: Fix the offset issue for the stolen GEM objects

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Akash Goel <akash.goel@intel.com>

commit ec14ba47791965d2c08e0a681ff44eacbf3c4553 upstream.

The 'offset' field of the 'scatterlist' structure was wrongly
programmed with the offset value from the base of stolen area,
whereas this field indicates the offset from where the interested
data starts within the first PAGE pointed to by 'scattterlist'
structure. As a result when a new GEM object allocated from stolen
area is mapped to GTT, it could lead to an overwrite of GTT entries
as the page count calculation will go wrong, refer the function
'sg_page_count'.

v2: Modified the commit message. (Chris)

Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem_stolen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_gem_stolen.c
+++ b/drivers/gpu/drm/i915/i915_gem_stolen.c
@@ -250,7 +250,7 @@ i915_pages_create_for_stolen(struct drm_
 	}
 
 	sg = st->sgl;
-	sg->offset = offset;
+	sg->offset = 0;
 	sg->length = size;
 
 	sg_dma_address(sg) = (dma_addr_t)dev_priv->mm.stolen_base + offset;

[PATCH 3.12 084/107] drm/i915: VLV2 - Fix hotplug detect bits

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Todd Previte <tprevite@gmail.com>

commit 232a6ee9af8adb185640f67fcaaa9014a9aa0573 upstream.

Add new definitions for hotplug live status bits for VLV2 since they're
in reverse order from the gen4x ones.

Changelog:
- Restored gen4 bit definitions
- Added new definitions for VLV2
- Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct
  bit defintions
- Replaced a lost trailing brace for the added switch()

Signed-off-by: Todd Previte <tprevite@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951
[danvet: Switch to _VLV postfix instead of prefix and regroupg
comments again so that the g4x warning is right next to those defines.
Also add a _G4X suffix for those special ones. Also cc stable.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_reg.h |   10 +++++++---
 drivers/gpu/drm/i915/intel_dp.c |   40 ++++++++++++++++++++++++++++------------
 2 files changed, 35 insertions(+), 15 deletions(-)

--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1955,9 +1955,13 @@
  * Please check the detailed lore in the commit message for for experimental
  * evidence.
  */
-#define   PORTD_HOTPLUG_LIVE_STATUS               (1 << 29)
-#define   PORTC_HOTPLUG_LIVE_STATUS               (1 << 28)
-#define   PORTB_HOTPLUG_LIVE_STATUS               (1 << 27)
+#define   PORTD_HOTPLUG_LIVE_STATUS_G4X		(1 << 29)
+#define   PORTC_HOTPLUG_LIVE_STATUS_G4X		(1 << 28)
+#define   PORTB_HOTPLUG_LIVE_STATUS_G4X		(1 << 27)
+/* VLV DP/HDMI bits again match Bspec */
+#define   PORTD_HOTPLUG_LIVE_STATUS_VLV		(1 << 27)
+#define   PORTC_HOTPLUG_LIVE_STATUS_VLV		(1 << 28)
+#define   PORTB_HOTPLUG_LIVE_STATUS_VLV		(1 << 29)
 #define   PORTD_HOTPLUG_INT_STATUS		(3 << 21)
 #define   PORTC_HOTPLUG_INT_STATUS		(3 << 19)
 #define   PORTB_HOTPLUG_INT_STATUS		(3 << 17)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -2803,18 +2803,34 @@ g4x_dp_detect(struct intel_dp *intel_dp)
 		return status;
 	}
 
-	switch (intel_dig_port->port) {
-	case PORT_B:
-		bit = PORTB_HOTPLUG_LIVE_STATUS;
-		break;
-	case PORT_C:
-		bit = PORTC_HOTPLUG_LIVE_STATUS;
-		break;
-	case PORT_D:
-		bit = PORTD_HOTPLUG_LIVE_STATUS;
-		break;
-	default:
-		return connector_status_unknown;
+	if (IS_VALLEYVIEW(dev)) {
+		switch (intel_dig_port->port) {
+		case PORT_B:
+			bit = PORTB_HOTPLUG_LIVE_STATUS_VLV;
+			break;
+		case PORT_C:
+			bit = PORTC_HOTPLUG_LIVE_STATUS_VLV;
+			break;
+		case PORT_D:
+			bit = PORTD_HOTPLUG_LIVE_STATUS_VLV;
+			break;
+		default:
+			return connector_status_unknown;
+		}
+	} else {
+		switch (intel_dig_port->port) {
+		case PORT_B:
+			bit = PORTB_HOTPLUG_LIVE_STATUS_G4X;
+			break;
+		case PORT_C:
+			bit = PORTC_HOTPLUG_LIVE_STATUS_G4X;
+			break;
+		case PORT_D:
+			bit = PORTD_HOTPLUG_LIVE_STATUS_G4X;
+			break;
+		default:
+			return connector_status_unknown;
+		}
 	}
 
 	if ((I915_READ(PORT_HOTPLUG_STAT) & bit) == 0)

[PATCH 3.12 085/107] i915: remove pm_qos request on error

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislaw Gruszka <sgruszka@redhat.com>

commit 22accca01713b13dac386ca90b787aadf88f6551 upstream.

Not removing pm qos request and free memory for it can cause crash,
when some other driver use pm qos. For example, this oops:

BUG: unable to handle kernel paging request at fffffffffffffff8
IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0
Call Trace:
 [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0
 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100
 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e]

was caused by earlier i915 probe failure:

[drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000
[drm:i915_driver_load] *ERROR* failed to init modeset
i915: probe of 0000:00:02.0 failed with error -5

Bug report:
http://bugzilla.redhat.com/show_bug.cgi?id=1057533

Reported-by: Giandomenico De Tullio <ghisha@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
[danvet: Drop unnecessary code movement.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_dma.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1683,6 +1683,7 @@ out_gem_unload:
 
 	intel_teardown_gmbus(dev);
 	intel_teardown_mchbar(dev);
+	pm_qos_remove_request(&dev_priv->pm_qos);
 	destroy_workqueue(dev_priv->wq);
 out_mtrrfree:
 	arch_phys_wc_del(dev_priv->gtt.mtrr);

[PATCH 3.12 087/107] drm/cirrus: correct register values for 16bpp

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 2510538fa000dd13a3e57b79bf073ffb1748976c upstream.

When the mode is set with 16bpp on QEMU, the output gets totally broken.
The culprit is the bogus register values set for 16bpp, which was likely
copied from from a wrong place.

Addresses https://bugzilla.novell.com/show_bug.cgi?id=799216

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/cirrus/cirrus_mode.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/cirrus/cirrus_mode.c
+++ b/drivers/gpu/drm/cirrus/cirrus_mode.c
@@ -273,8 +273,8 @@ static int cirrus_crtc_mode_set(struct d
 		sr07 |= 0x11;
 		break;
 	case 16:
-		sr07 |= 0xc1;
-		hdr = 0xc0;
+		sr07 |= 0x17;
+		hdr = 0xc1;
 		break;
 	case 24:
 		sr07 |= 0x15;

[PATCH 3.12 088/107] drm/gem: Always initialize the gem object in object_init

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Vetter <daniel.vetter@ffwll.ch>

commit 6ab11a2635ce988ebc2e798947beb72cf7324119 upstream.

At least drm/i915 expects that the obj->dev pointer is set even in
failure paths. Specifically when the shmem initialization fails we
call i915_gem_object_free which needs to deref obj->base.dev to get at
the slab pointer in the device private structure. And the shmem
allocation can easily fail when userspace is hitting open file limits.

Doing the structure init even when the shmem file allocation fails
prevents this Oops.

This is a regression from

commit 89c8233f82d9c8af5b20e72e4a185a38a7d3c50b
Author: David Herrmann <dh.herrmann@gmail.com>
Date:   Thu Jul 11 11:56:32 2013 +0200

    drm/gem: simplify object initialization

v2: Add regression note which Chris supplied.

Testcase: igt/gem_fd_exhaustion
Reported-and-Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
References: http://lists.freedesktop.org/archives/intel-gfx/2014-January/038433.html
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/drm_gem.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/drm_gem.c
+++ b/drivers/gpu/drm/drm_gem.c
@@ -129,11 +129,12 @@ int drm_gem_object_init(struct drm_devic
 {
 	struct file *filp;
 
+	drm_gem_private_object_init(dev, obj, size);
+
 	filp = shmem_file_setup("drm mm object", size, VM_NORESERVE);
 	if (IS_ERR(filp))
 		return PTR_ERR(filp);
 
-	drm_gem_private_object_init(dev, obj, size);
 	obj->filp = filp;
 
 	return 0;

[PATCH 3.12 089/107] drm/rcar-du: Update plane pitch in .mode_set_base() operation

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

commit eb86301f293da3c362db729a9f40ddb25755902b upstream.

When setting a new frame buffer with the mode set base operation the
pitch value might change. Set the hardware plane pitch register at the
same time as the plane base address in the rcar_du_plane_update_base()
function to make sure the pitch value always matches the frame buffer.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c  |    1 -
 drivers/gpu/drm/rcar-du/rcar_du_plane.c |   21 +++++++++++----------
 2 files changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c
@@ -371,7 +371,6 @@ static int rcar_du_crtc_mode_set(struct
 		goto error;
 
 	rcrtc->plane->format = format;
-	rcrtc->plane->pitch = crtc->fb->pitches[0];
 
 	rcrtc->plane->src_x = x;
 	rcrtc->plane->src_y = y;
--- a/drivers/gpu/drm/rcar-du/rcar_du_plane.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_plane.c
@@ -104,6 +104,15 @@ void rcar_du_plane_update_base(struct rc
 {
 	struct rcar_du_group *rgrp = plane->group;
 	unsigned int index = plane->hwindex;
+	u32 mwr;
+
+	/* Memory pitch (expressed in pixels) */
+	if (plane->format->planes == 2)
+		mwr = plane->pitch;
+	else
+		mwr = plane->pitch * 8 / plane->format->bpp;
+
+	rcar_du_plane_write(rgrp, index, PnMWR, mwr);
 
 	/* The Y position is expressed in raster line units and must be doubled
 	 * for 32bpp formats, according to the R8A7790 datasheet. No mention of
@@ -133,6 +142,8 @@ void rcar_du_plane_compute_base(struct r
 {
 	struct drm_gem_cma_object *gem;
 
+	plane->pitch = fb->pitches[0];
+
 	gem = drm_fb_cma_get_gem_obj(fb, 0);
 	plane->dma[0] = gem->paddr + fb->offsets[0];
 
@@ -209,7 +220,6 @@ static void __rcar_du_plane_setup(struct
 	struct rcar_du_group *rgrp = plane->group;
 	u32 ddcr2 = PnDDCR2_CODE;
 	u32 ddcr4;
-	u32 mwr;
 
 	/* Data format
 	 *
@@ -240,14 +250,6 @@ static void __rcar_du_plane_setup(struct
 	rcar_du_plane_write(rgrp, index, PnDDCR2, ddcr2);
 	rcar_du_plane_write(rgrp, index, PnDDCR4, ddcr4);
 
-	/* Memory pitch (expressed in pixels) */
-	if (plane->format->planes == 2)
-		mwr = plane->pitch;
-	else
-		mwr = plane->pitch * 8 / plane->format->bpp;
-
-	rcar_du_plane_write(rgrp, index, PnMWR, mwr);
-
 	/* Destination position and size */
 	rcar_du_plane_write(rgrp, index, PnDSXR, plane->width);
 	rcar_du_plane_write(rgrp, index, PnDSYR, plane->height);
@@ -309,7 +311,6 @@ rcar_du_plane_update(struct drm_plane *p
 
 	rplane->crtc = crtc;
 	rplane->format = format;
-	rplane->pitch = fb->pitches[0];
 
 	rplane->src_x = src_x >> 16;
 	rplane->src_y = src_y >> 16;

[PATCH 3.12 090/107] drm/gma500: Lock struct_mutex around cursor updates

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>

commit 631794b44bd3dbfba37074954d5c584c9e8725f0 upstream.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64361
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/gma500/gma_display.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/gma500/gma_display.c
+++ b/drivers/gpu/drm/gma500/gma_display.c
@@ -349,6 +349,7 @@ int gma_crtc_cursor_set(struct drm_crtc
 	/* If we didn't get a handle then turn the cursor off */
 	if (!handle) {
 		temp = CURSOR_MODE_DISABLE;
+		mutex_lock(&dev->struct_mutex);
 
 		if (gma_power_begin(dev, false)) {
 			REG_WRITE(control, temp);
@@ -365,6 +366,7 @@ int gma_crtc_cursor_set(struct drm_crtc
 			gma_crtc->cursor_obj = NULL;
 		}
 
+		mutex_unlock(&dev->struct_mutex);
 		return 0;
 	}
 
@@ -374,9 +376,12 @@ int gma_crtc_cursor_set(struct drm_crtc
 		return -EINVAL;
 	}
 
+	mutex_lock(&dev->struct_mutex);
 	obj = drm_gem_object_lookup(dev, file_priv, handle);
-	if (!obj)
-		return -ENOENT;
+	if (!obj) {
+		ret = -ENOENT;
+		goto unlock;
+	}
 
 	if (obj->size < width * height * 4) {
 		dev_dbg(dev->dev, "Buffer is too small\n");
@@ -440,10 +445,13 @@ int gma_crtc_cursor_set(struct drm_crtc
 	}
 
 	gma_crtc->cursor_obj = obj;
+unlock:
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 
 unref_cursor:
 	drm_gem_object_unreference(obj);
+	mutex_unlock(&dev->struct_mutex);
 	return ret;
 }
 

[PATCH 3.12 091/107] drm: ast,cirrus,mgag200: use drm_can_sleep

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit f4b4718b61d1d5a7442a4fd6863ea80c3a10e508 upstream.

these 3 were checking in_interrupt but we have situations where
calling vunmap under this could cause a BUG to be hit in
smp_call_function_many. Use the drm_can_sleep macro instead,
which should stop this path from been taken in this case.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/ast/ast_fb.c          |    2 +-
 drivers/gpu/drm/cirrus/cirrus_fbdev.c |    2 +-
 drivers/gpu/drm/mgag200/mgag200_fb.c  |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/ast/ast_fb.c
+++ b/drivers/gpu/drm/ast/ast_fb.c
@@ -65,7 +65,7 @@ static void ast_dirty_update(struct ast_
 	 * then the BO is being moved and we should
 	 * store up the damage until later.
 	 */
-	if (!in_interrupt())
+	if (!drm_can_sleep())
 		ret = ast_bo_reserve(bo, true);
 	if (ret) {
 		if (ret != -EBUSY)
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -39,7 +39,7 @@ static void cirrus_dirty_update(struct c
 	 * then the BO is being moved and we should
 	 * store up the damage until later.
 	 */
-	if (!in_interrupt())
+	if (!drm_can_sleep())
 		ret = cirrus_bo_reserve(bo, true);
 	if (ret) {
 		if (ret != -EBUSY)
--- a/drivers/gpu/drm/mgag200/mgag200_fb.c
+++ b/drivers/gpu/drm/mgag200/mgag200_fb.c
@@ -41,7 +41,7 @@ static void mga_dirty_update(struct mga_
 	 * then the BO is being moved and we should
 	 * store up the damage until later.
 	 */
-	if (!in_interrupt())
+	if (!drm_can_sleep())
 		ret = mgag200_bo_reserve(bo, true);
 	if (ret) {
 		if (ret != -EBUSY)

[PATCH 3.12 092/107] drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls"

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit cf5e3413337309050c05e13dcebe85b7194a21e5 upstream.

The call to ttm_eu_backoff_reservation() as part of an error path would cause
a lock imbalance if the reservation ticket was not initialized. This error is
easily triggered from user-space by submitting a bogus command stream.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -1483,11 +1483,11 @@ int vmw_execbuf_process(struct drm_file
 	ret = vmw_cmd_check_all(dev_priv, sw_context, kernel_commands,
 				command_size);
 	if (unlikely(ret != 0))
-		goto out_err;
+		goto out_err_nores;
 
 	ret = vmw_resources_reserve(sw_context);
 	if (unlikely(ret != 0))
-		goto out_err;
+		goto out_err_nores;
 
 	ret = ttm_eu_reserve_buffers(&ticket, &sw_context->validate_nodes);
 	if (unlikely(ret != 0))
@@ -1569,10 +1569,11 @@ int vmw_execbuf_process(struct drm_file
 	return 0;
 
 out_err:
-	vmw_resource_relocations_free(&sw_context->res_relocations);
-	vmw_free_relocations(sw_context);
 	ttm_eu_backoff_reservation(&ticket, &sw_context->validate_nodes);
+out_err_nores:
 	vmw_resource_list_unreserve(&sw_context->resource_list, true);
+	vmw_resource_relocations_free(&sw_context->res_relocations);
+	vmw_free_relocations(sw_context);
 	vmw_clear_validations(sw_context);
 	if (unlikely(dev_priv->pinned_bo != NULL &&
 		     !dev_priv->query_cid_valid))

[PATCH 3.12 093/107] drm/mgag200: fix oops in cursor code.

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit 53dac830537b51df555ba5e7ebb236705b7eaa7c upstream.

In some cases we enter the cursor code with file_priv = NULL causing an oops,
we also can try to unpin something that isn't pinned, and this is a good fix for it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/mgag200/mgag200_cursor.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/mgag200/mgag200_cursor.c
+++ b/drivers/gpu/drm/mgag200/mgag200_cursor.c
@@ -22,8 +22,10 @@ static void mga_hide_cursor(struct mga_d
 {
 	WREG8(MGA_CURPOSXL, 0);
 	WREG8(MGA_CURPOSXH, 0);
-	mgag200_bo_unpin(mdev->cursor.pixels_1);
-	mgag200_bo_unpin(mdev->cursor.pixels_2);
+	if (mdev->cursor.pixels_1->pin_count)
+		mgag200_bo_unpin(mdev->cursor.pixels_1);
+	if (mdev->cursor.pixels_2->pin_count)
+		mgag200_bo_unpin(mdev->cursor.pixels_2);
 }
 
 int mga_crtc_cursor_set(struct drm_crtc *crtc,
@@ -32,7 +34,7 @@ int mga_crtc_cursor_set(struct drm_crtc
 			uint32_t width,
 			uint32_t height)
 {
-	struct drm_device *dev = (struct drm_device *)file_priv->minor->dev;
+	struct drm_device *dev = crtc->dev;
 	struct mga_device *mdev = (struct mga_device *)dev->dev_private;
 	struct mgag200_bo *pixels_1 = mdev->cursor.pixels_1;
 	struct mgag200_bo *pixels_2 = mdev->cursor.pixels_2;

[PATCH 3.12 094/107] drm/mgag200: fix typo causing bw limits to be ignored on some chips

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit ec22b4aa993abbd18f5bbbcb20a1c56be3b1d38b upstream.

mode->mdev otherwise the bw limits never kick in.

Reported in RHEL testing.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/mgag200/mgag200_mode.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/mgag200/mgag200_mode.c
+++ b/drivers/gpu/drm/mgag200/mgag200_mode.c
@@ -1521,11 +1521,11 @@ static int mga_vga_mode_valid(struct drm
 		(mga_vga_calculate_mode_bandwidth(mode, bpp)
 			> (32700 * 1024))) {
 		return MODE_BANDWIDTH;
-	} else if (mode->type == G200_EH &&
+	} else if (mdev->type == G200_EH &&
 		(mga_vga_calculate_mode_bandwidth(mode, bpp)
 			> (37500 * 1024))) {
 		return MODE_BANDWIDTH;
-	} else if (mode->type == G200_ER &&
+	} else if (mdev->type == G200_ER &&
 		(mga_vga_calculate_mode_bandwidth(mode,
 			bpp) > (55000 * 1024))) {
 		return MODE_BANDWIDTH;

[PATCH 3.12 095/107] drm/mgag200,ast,cirrus: fix regression with drm_can_sleep conversion

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dave Airlie <airlied@redhat.com>

commit 8b7ad1bb3d440da888f2a939dc870eba429b9192 upstream.

I totally sign inverted my way out of this one.

Reported-by: "Sabrina Dubroca" <sd@queasysnail.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/ast/ast_fb.c          |    2 +-
 drivers/gpu/drm/cirrus/cirrus_fbdev.c |    2 +-
 drivers/gpu/drm/mgag200/mgag200_fb.c  |    2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/gpu/drm/ast/ast_fb.c
+++ b/drivers/gpu/drm/ast/ast_fb.c
@@ -65,7 +65,7 @@ static void ast_dirty_update(struct ast_
 	 * then the BO is being moved and we should
 	 * store up the damage until later.
 	 */
-	if (!drm_can_sleep())
+	if (drm_can_sleep())
 		ret = ast_bo_reserve(bo, true);
 	if (ret) {
 		if (ret != -EBUSY)
--- a/drivers/gpu/drm/cirrus/cirrus_fbdev.c
+++ b/drivers/gpu/drm/cirrus/cirrus_fbdev.c
@@ -39,7 +39,7 @@ static void cirrus_dirty_update(struct c
 	 * then the BO is being moved and we should
 	 * store up the damage until later.
 	 */
-	if (!drm_can_sleep())
+	if (drm_can_sleep())
 		ret = cirrus_bo_reserve(bo, true);
 	if (ret) {
 		if (ret != -EBUSY)
--- a/drivers/gpu/drm/mgag200/mgag200_fb.c
+++ b/drivers/gpu/drm/mgag200/mgag200_fb.c
@@ -41,7 +41,7 @@ static void mga_dirty_update(struct mga_
 	 * then the BO is being moved and we should
 	 * store up the damage until later.
 	 */
-	if (!drm_can_sleep())
+	if (drm_can_sleep())
 		ret = mgag200_bo_reserve(bo, true);
 	if (ret) {
 		if (ret != -EBUSY)

[PATCH 3.12 096/107] ftrace: Synchronize setting function_trace_op with ftrace_trace_function

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 405e1d834807e51b2ebd3dea81cb51e53fb61504 upstream.

ftrace_trace_function is a variable that holds what function will be called
directly by the assembly code (mcount). If just a single function is
registered and it handles recursion itself, then the assembly will call that
function directly without any helper function. It also passes in the
ftrace_op that was registered with the callback. The ftrace_op to send is
stored in the function_trace_op variable.

The ftrace_trace_function and function_trace_op needs to be coordinated such
that the called callback wont be called with the wrong ftrace_op, otherwise
bad things can happen if it expected a different op. Luckily, there's no
callback that doesn't use the helper functions that requires this. But
there soon will be and this needs to be fixed.

Use a set_function_trace_op to store the ftrace_op to set the
function_trace_op to when it is safe to do so (during the update function
within the breakpoint or stop machine calls). Or if dynamic ftrace is not
being used (static tracing) then we have to do a bit more synchronization
when the ftrace_trace_function is set as that takes affect immediately
(as oppose to dynamic ftrace doing it with the modification of the trampoline).

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |   87 +++++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 72 insertions(+), 15 deletions(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -85,6 +85,8 @@ int function_trace_stop __read_mostly;
 
 /* Current function tracing op */
 struct ftrace_ops *function_trace_op __read_mostly = &ftrace_list_end;
+/* What to set function_trace_op to */
+static struct ftrace_ops *set_function_trace_op;
 
 /* List for set_ftrace_pid's pids. */
 LIST_HEAD(ftrace_pids);
@@ -278,6 +280,23 @@ static void update_global_ops(void)
 	global_ops.func = func;
 }
 
+static void ftrace_sync(struct work_struct *work)
+{
+	/*
+	 * This function is just a stub to implement a hard force
+	 * of synchronize_sched(). This requires synchronizing
+	 * tasks even in userspace and idle.
+	 *
+	 * Yes, function tracing is rude.
+	 */
+}
+
+static void ftrace_sync_ipi(void *data)
+{
+	/* Probably not needed, but do it anyway */
+	smp_rmb();
+}
+
 static void update_ftrace_function(void)
 {
 	ftrace_func_t func;
@@ -296,16 +315,59 @@ static void update_ftrace_function(void)
 	     !FTRACE_FORCE_LIST_FUNC)) {
 		/* Set the ftrace_ops that the arch callback uses */
 		if (ftrace_ops_list == &global_ops)
-			function_trace_op = ftrace_global_list;
+			set_function_trace_op = ftrace_global_list;
 		else
-			function_trace_op = ftrace_ops_list;
+			set_function_trace_op = ftrace_ops_list;
 		func = ftrace_ops_list->func;
 	} else {
 		/* Just use the default ftrace_ops */
-		function_trace_op = &ftrace_list_end;
+		set_function_trace_op = &ftrace_list_end;
 		func = ftrace_ops_list_func;
 	}
 
+	/* If there's no change, then do nothing more here */
+	if (ftrace_trace_function == func)
+		return;
+
+	/*
+	 * If we are using the list function, it doesn't care
+	 * about the function_trace_ops.
+	 */
+	if (func == ftrace_ops_list_func) {
+		ftrace_trace_function = func;
+		/*
+		 * Don't even bother setting function_trace_ops,
+		 * it would be racy to do so anyway.
+		 */
+		return;
+	}
+
+#ifndef CONFIG_DYNAMIC_FTRACE
+	/*
+	 * For static tracing, we need to be a bit more careful.
+	 * The function change takes affect immediately. Thus,
+	 * we need to coorditate the setting of the function_trace_ops
+	 * with the setting of the ftrace_trace_function.
+	 *
+	 * Set the function to the list ops, which will call the
+	 * function we want, albeit indirectly, but it handles the
+	 * ftrace_ops and doesn't depend on function_trace_op.
+	 */
+	ftrace_trace_function = ftrace_ops_list_func;
+	/*
+	 * Make sure all CPUs see this. Yes this is slow, but static
+	 * tracing is slow and nasty to have enabled.
+	 */
+	schedule_on_each_cpu(ftrace_sync);
+	/* Now all cpus are using the list ops. */
+	function_trace_op = set_function_trace_op;
+	/* Make sure the function_trace_op is visible on all CPUs */
+	smp_wmb();
+	/* Nasty way to force a rmb on all cpus */
+	smp_call_function(ftrace_sync_ipi, NULL, 1);
+	/* OK, we are all set to update the ftrace_trace_function now! */
+#endif /* !CONFIG_DYNAMIC_FTRACE */
+
 	ftrace_trace_function = func;
 }
 
@@ -410,17 +472,6 @@ static int __register_ftrace_function(st
 	return 0;
 }
 
-static void ftrace_sync(struct work_struct *work)
-{
-	/*
-	 * This function is just a stub to implement a hard force
-	 * of synchronize_sched(). This requires synchronizing
-	 * tasks even in userspace and idle.
-	 *
-	 * Yes, function tracing is rude.
-	 */
-}
-
 static int __unregister_ftrace_function(struct ftrace_ops *ops)
 {
 	int ret;
@@ -1992,8 +2043,14 @@ void ftrace_modify_all_code(int command)
 	else if (command & FTRACE_DISABLE_CALLS)
 		ftrace_replace_code(0);
 
-	if (update && ftrace_trace_function != ftrace_ops_list_func)
+	if (update && ftrace_trace_function != ftrace_ops_list_func) {
+		function_trace_op = set_function_trace_op;
+		smp_wmb();
+		/* If irqs are disabled, we are in stop machine */
+		if (!irqs_disabled())
+			smp_call_function(ftrace_sync_ipi, NULL, 1);
 		ftrace_update_ftrace_func(ftrace_trace_function);
+	}
 
 	if (command & FTRACE_START_FUNC_RET)
 		ftrace_enable_ftrace_graph_caller();

[PATCH 3.12 097/107] ftrace: Fix synchronization location disabling and freeing ftrace_ops

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit a4c35ed241129dd142be4cadb1e5a474a56d5464 upstream.

The synchronization needed after ftrace_ops are unregistered must happen
after the callback is disabled from becing called by functions.

The current location happens after the function is being removed from the
internal lists, but not after the function callbacks were disabled, leaving
the functions susceptible of being called after their callbacks are freed.

This affects perf and any externel users of function tracing (LTTng and
SystemTap).

Fixes: cdbe61bfe704 "ftrace: Allow dynamically allocated function tracers"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |   58 +++++++++++++++++++++++++++-----------------------
 1 file changed, 32 insertions(+), 26 deletions(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -490,20 +490,6 @@ static int __unregister_ftrace_function(
 	} else if (ops->flags & FTRACE_OPS_FL_CONTROL) {
 		ret = remove_ftrace_list_ops(&ftrace_control_list,
 					     &control_ops, ops);
-		if (!ret) {
-			/*
-			 * The ftrace_ops is now removed from the list,
-			 * so there'll be no new users. We must ensure
-			 * all current users are done before we free
-			 * the control data.
-			 * Note synchronize_sched() is not enough, as we
-			 * use preempt_disable() to do RCU, but the function
-			 * tracer can be called where RCU is not active
-			 * (before user_exit()).
-			 */
-			schedule_on_each_cpu(ftrace_sync);
-			control_ops_free(ops);
-		}
 	} else
 		ret = remove_ftrace_ops(&ftrace_ops_list, ops);
 
@@ -513,17 +499,6 @@ static int __unregister_ftrace_function(
 	if (ftrace_enabled)
 		update_ftrace_function();
 
-	/*
-	 * Dynamic ops may be freed, we must make sure that all
-	 * callers are done before leaving this function.
-	 *
-	 * Again, normal synchronize_sched() is not good enough.
-	 * We need to do a hard force of sched synchronization.
-	 */
-	if (ops->flags & FTRACE_OPS_FL_DYNAMIC)
-		schedule_on_each_cpu(ftrace_sync);
-
-
 	return 0;
 }
 
@@ -2213,10 +2188,41 @@ static int ftrace_shutdown(struct ftrace
 		command |= FTRACE_UPDATE_TRACE_FUNC;
 	}
 
-	if (!command || !ftrace_enabled)
+	if (!command || !ftrace_enabled) {
+		/*
+		 * If these are control ops, they still need their
+		 * per_cpu field freed. Since, function tracing is
+		 * not currently active, we can just free them
+		 * without synchronizing all CPUs.
+		 */
+		if (ops->flags & FTRACE_OPS_FL_CONTROL)
+			control_ops_free(ops);
 		return 0;
+	}
 
 	ftrace_run_update_code(command);
+
+	/*
+	 * Dynamic ops may be freed, we must make sure that all
+	 * callers are done before leaving this function.
+	 * The same goes for freeing the per_cpu data of the control
+	 * ops.
+	 *
+	 * Again, normal synchronize_sched() is not good enough.
+	 * We need to do a hard force of sched synchronization.
+	 * This is because we use preempt_disable() to do RCU, but
+	 * the function tracers can be called where RCU is not watching
+	 * (like before user_exit()). We can not rely on the RCU
+	 * infrastructure to do the synchronization, thus we must do it
+	 * ourselves.
+	 */
+	if (ops->flags & (FTRACE_OPS_FL_DYNAMIC | FTRACE_OPS_FL_CONTROL)) {
+		schedule_on_each_cpu(ftrace_sync);
+
+		if (ops->flags & FTRACE_OPS_FL_CONTROL)
+			control_ops_free(ops);
+	}
+
 	return 0;
 }
 

[PATCH 3.12 098/107] ftrace: Have function graph only trace based on global_ops filters

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 23a8e8441a0a74dd612edf81dc89d1600bc0a3d1 upstream.

Doing some different tests, I discovered that function graph tracing, when
filtered via the set_ftrace_filter and set_ftrace_notrace files, does
not always keep with them if another function ftrace_ops is registered
to trace functions.

The reason is that function graph just happens to trace all functions
that the function tracer enables. When there was only one user of
function tracing, the function graph tracer did not need to worry about
being called by functions that it did not want to trace. But now that there
are other users, this becomes a problem.

For example, one just needs to do the following:

 # cd /sys/kernel/debug/tracing
 # echo schedule > set_ftrace_filter
 # echo function_graph > current_tracer
 # cat trace
[..]
 0)               |  schedule() {
 ------------------------------------------
 0)    <idle>-0    =>   rcu_pre-7
 ------------------------------------------

 0) ! 2980.314 us |  }
 0)               |  schedule() {
 ------------------------------------------
 0)   rcu_pre-7    =>    <idle>-0
 ------------------------------------------

 0) + 20.701 us   |  }

 # echo 1 > /proc/sys/kernel/stack_tracer_enabled
 # cat trace
[..]
 1) + 20.825 us   |      }
 1) + 21.651 us   |    }
 1) + 30.924 us   |  } /* SyS_ioctl */
 1)               |  do_page_fault() {
 1)               |    __do_page_fault() {
 1)   0.274 us    |      down_read_trylock();
 1)   0.098 us    |      find_vma();
 1)               |      handle_mm_fault() {
 1)               |        _raw_spin_lock() {
 1)   0.102 us    |          preempt_count_add();
 1)   0.097 us    |          do_raw_spin_lock();
 1)   2.173 us    |        }
 1)               |        do_wp_page() {
 1)   0.079 us    |          vm_normal_page();
 1)   0.086 us    |          reuse_swap_page();
 1)   0.076 us    |          page_move_anon_rmap();
 1)               |          unlock_page() {
 1)   0.082 us    |            page_waitqueue();
 1)   0.086 us    |            __wake_up_bit();
 1)   1.801 us    |          }
 1)   0.075 us    |          ptep_set_access_flags();
 1)               |          _raw_spin_unlock() {
 1)   0.098 us    |            do_raw_spin_unlock();
 1)   0.105 us    |            preempt_count_sub();
 1)   1.884 us    |          }
 1)   9.149 us    |        }
 1) + 13.083 us   |      }
 1)   0.146 us    |      up_read();

When the stack tracer was enabled, it enabled all functions to be traced, which
now the function graph tracer also traces. This is a side effect that should
not occur.

To fix this a test is added when the function tracing is changed, as well as when
the graph tracer is enabled, to see if anything other than the ftrace global_ops
function tracer is enabled. If so, then the graph tracer calls a test trampoline
that will look at the function that is being traced and compare it with the
filters defined by the global_ops.

As an optimization, if there's no other function tracers registered, or if
the only registered function tracers also use the global ops, the function
graph infrastructure will call the registered function graph callback directly
and not go through the test trampoline.

Fixes: d2d45c7a03a2 "tracing: Have stack_tracer use a separate list of functions"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |   45 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 44 insertions(+), 1 deletion(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -297,6 +297,12 @@ static void ftrace_sync_ipi(void *data)
 	smp_rmb();
 }
 
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+static void update_function_graph_func(void);
+#else
+static inline void update_function_graph_func(void) { }
+#endif
+
 static void update_ftrace_function(void)
 {
 	ftrace_func_t func;
@@ -329,6 +335,8 @@ static void update_ftrace_function(void)
 	if (ftrace_trace_function == func)
 		return;
 
+	update_function_graph_func();
+
 	/*
 	 * If we are using the list function, it doesn't care
 	 * about the function_trace_ops.
@@ -4840,6 +4848,7 @@ int ftrace_graph_entry_stub(struct ftrac
 trace_func_graph_ret_t ftrace_graph_return =
 			(trace_func_graph_ret_t)ftrace_stub;
 trace_func_graph_ent_t ftrace_graph_entry = ftrace_graph_entry_stub;
+static trace_func_graph_ent_t __ftrace_graph_entry = ftrace_graph_entry_stub;
 
 /* Try to assign a return stack array on FTRACE_RETSTACK_ALLOC_SIZE tasks. */
 static int alloc_retstack_tasklist(struct ftrace_ret_stack **ret_stack_list)
@@ -4981,6 +4990,30 @@ static struct ftrace_ops fgraph_ops __re
 				FTRACE_OPS_FL_RECURSION_SAFE,
 };
 
+static int ftrace_graph_entry_test(struct ftrace_graph_ent *trace)
+{
+	if (!ftrace_ops_test(&global_ops, trace->func, NULL))
+		return 0;
+	return __ftrace_graph_entry(trace);
+}
+
+/*
+ * The function graph tracer should only trace the functions defined
+ * by set_ftrace_filter and set_ftrace_notrace. If another function
+ * tracer ops is registered, the graph tracer requires testing the
+ * function against the global ops, and not just trace any function
+ * that any ftrace_ops registered.
+ */
+static void update_function_graph_func(void)
+{
+	if (ftrace_ops_list == &ftrace_list_end ||
+	    (ftrace_ops_list == &global_ops &&
+	     global_ops.next == &ftrace_list_end))
+		ftrace_graph_entry = __ftrace_graph_entry;
+	else
+		ftrace_graph_entry = ftrace_graph_entry_test;
+}
+
 int register_ftrace_graph(trace_func_graph_ret_t retfunc,
 			trace_func_graph_ent_t entryfunc)
 {
@@ -5005,7 +5038,16 @@ int register_ftrace_graph(trace_func_gra
 	}
 
 	ftrace_graph_return = retfunc;
-	ftrace_graph_entry = entryfunc;
+
+	/*
+	 * Update the indirect function to the entryfunc, and the
+	 * function that gets called to the entry_test first. Then
+	 * call the update fgraph entry function to determine if
+	 * the entryfunc should be called directly or not.
+	 */
+	__ftrace_graph_entry = entryfunc;
+	ftrace_graph_entry = ftrace_graph_entry_test;
+	update_function_graph_func();
 
 	ret = ftrace_startup(&fgraph_ops, FTRACE_START_FUNC_RET);
 
@@ -5024,6 +5066,7 @@ void unregister_ftrace_graph(void)
 	ftrace_graph_active--;
 	ftrace_graph_return = (trace_func_graph_ret_t)ftrace_stub;
 	ftrace_graph_entry = ftrace_graph_entry_stub;
+	__ftrace_graph_entry = ftrace_graph_entry_stub;
 	ftrace_shutdown(&fgraph_ops, FTRACE_STOP_FUNC_RET);
 	unregister_pm_notifier(&ftrace_suspend_notifier);
 	unregister_trace_sched_switch(ftrace_graph_probe_sched_switch, NULL);

[PATCH 3.12 099/107] timekeeping: Fix lost updates to tai adjustment

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit f55c07607a38f84b5c7e6066ee1cfe433fa5643c upstream.

Since 48cdc135d4840 (Implement a shadow timekeeper), we have to
call timekeeping_update() after any adjustment to the timekeeping
structure in order to make sure that any adjustments to the structure
persist.

Unfortunately, the updates to the tai offset via adjtimex do not
trigger this update, causing adjustments to the tai offset to be
made and then over-written by the previous value at the next
update_wall_time() call.

This patch resovles the issue by calling timekeeping_update()
right after setting the tai offset.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -610,6 +610,7 @@ void timekeeping_set_tai_offset(s32 tai_
 	raw_spin_lock_irqsave(&timekeeper_lock, flags);
 	write_seqcount_begin(&timekeeper_seq);
 	__timekeeping_set_tai_offset(tk, tai_offset);
+	timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
 	write_seqcount_end(&timekeeper_seq);
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
 	clock_was_set();
@@ -1697,7 +1698,7 @@ int do_adjtimex(struct timex *txc)
 
 	if (tai != orig_tai) {
 		__timekeeping_set_tai_offset(tk, tai);
-		update_pvclock_gtod(tk, true);
+		timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
 		clock_was_set_delayed();
 	}
 	write_seqcount_end(&timekeeper_seq);

[PATCH 3.12 100/107] timekeeping: Fix potential lost pv notification of time change

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 5258d3f25c76f6ab86e9333abf97a55a877d3870 upstream.

In 780427f0e11 (Indicate that clock was set in the pvclock
gtod notifier), logic was added to pass a CLOCK_WAS_SET
notification to the pvclock notifier chain.

While that patch added a action flag returned from
accumulate_nsecs_to_secs(), it only uses the returned value
in one location, and not in the logarithmic accumulation.

This means if a leap second triggered during the logarithmic
accumulation (which is most likely where it would happen),
the notification that the clock was set would not make it to
the pv notifiers.

This patch extends the logarithmic_accumulation pass down
that action flag so proper notification will occur.

This patch also changes the varialbe action -> clock_set
per Ingo's suggestion.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: <xen-devel@lists.xen.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1256,7 +1256,7 @@ out_adjust:
 static inline unsigned int accumulate_nsecs_to_secs(struct timekeeper *tk)
 {
 	u64 nsecps = (u64)NSEC_PER_SEC << tk->shift;
-	unsigned int action = 0;
+	unsigned int clock_set = 0;
 
 	while (tk->xtime_nsec >= nsecps) {
 		int leap;
@@ -1279,10 +1279,10 @@ static inline unsigned int accumulate_ns
 			__timekeeping_set_tai_offset(tk, tk->tai_offset - leap);
 
 			clock_was_set_delayed();
-			action = TK_CLOCK_WAS_SET;
+			clock_set = TK_CLOCK_WAS_SET;
 		}
 	}
-	return action;
+	return clock_set;
 }
 
 /**
@@ -1295,7 +1295,8 @@ static inline unsigned int accumulate_ns
  * Returns the unconsumed cycles.
  */
 static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset,
-						u32 shift)
+						u32 shift,
+						unsigned int *clock_set)
 {
 	cycle_t interval = tk->cycle_interval << shift;
 	u64 raw_nsecs;
@@ -1309,7 +1310,7 @@ static cycle_t logarithmic_accumulation(
 	tk->cycle_last += interval;
 
 	tk->xtime_nsec += tk->xtime_interval << shift;
-	accumulate_nsecs_to_secs(tk);
+	*clock_set |= accumulate_nsecs_to_secs(tk);
 
 	/* Accumulate raw time */
 	raw_nsecs = (u64)tk->raw_interval << shift;
@@ -1367,7 +1368,7 @@ static void update_wall_time(void)
 	struct timekeeper *tk = &shadow_timekeeper;
 	cycle_t offset;
 	int shift = 0, maxshift;
-	unsigned int action;
+	unsigned int clock_set = 0;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&timekeeper_lock, flags);
@@ -1402,7 +1403,8 @@ static void update_wall_time(void)
 	maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
 	shift = min(shift, maxshift);
 	while (offset >= tk->cycle_interval) {
-		offset = logarithmic_accumulation(tk, offset, shift);
+		offset = logarithmic_accumulation(tk, offset, shift,
+							&clock_set);
 		if (offset < tk->cycle_interval<<shift)
 			shift--;
 	}
@@ -1420,7 +1422,7 @@ static void update_wall_time(void)
 	 * Finally, make sure that after the rounding
 	 * xtime_nsec isn't larger than NSEC_PER_SEC
 	 */
-	action = accumulate_nsecs_to_secs(tk);
+	clock_set |= accumulate_nsecs_to_secs(tk);
 
 	write_seqcount_begin(&timekeeper_seq);
 	/* Update clock->cycle_last with the new value */
@@ -1436,7 +1438,7 @@ static void update_wall_time(void)
 	 * updating.
 	 */
 	memcpy(real_tk, tk, sizeof(*tk));
-	timekeeping_update(real_tk, action);
+	timekeeping_update(real_tk, clock_set);
 	write_seqcount_end(&timekeeper_seq);
 out:
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

[PATCH 3.12 100/107] timekeeping: Fix potential lost pv notification of time change

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 5258d3f25c76f6ab86e9333abf97a55a877d3870 upstream.

In 780427f0e11 (Indicate that clock was set in the pvclock
gtod notifier), logic was added to pass a CLOCK_WAS_SET
notification to the pvclock notifier chain.

While that patch added a action flag returned from
accumulate_nsecs_to_secs(), it only uses the returned value
in one location, and not in the logarithmic accumulation.

This means if a leap second triggered during the logarithmic
accumulation (which is most likely where it would happen),
the notification that the clock was set would not make it to
the pv notifiers.

This patch extends the logarithmic_accumulation pass down
that action flag so proper notification will occur.

This patch also changes the varialbe action -> clock_set
per Ingo's suggestion.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: <xen-devel@lists.xen.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1256,7 +1256,7 @@ out_adjust:
 static inline unsigned int accumulate_nsecs_to_secs(struct timekeeper *tk)
 {
 	u64 nsecps = (u64)NSEC_PER_SEC << tk->shift;
-	unsigned int action = 0;
+	unsigned int clock_set = 0;
 
 	while (tk->xtime_nsec >= nsecps) {
 		int leap;
@@ -1279,10 +1279,10 @@ static inline unsigned int accumulate_ns
 			__timekeeping_set_tai_offset(tk, tk->tai_offset - leap);
 
 			clock_was_set_delayed();
-			action = TK_CLOCK_WAS_SET;
+			clock_set = TK_CLOCK_WAS_SET;
 		}
 	}
-	return action;
+	return clock_set;
 }
 
 /**
@@ -1295,7 +1295,8 @@ static inline unsigned int accumulate_ns
  * Returns the unconsumed cycles.
  */
 static cycle_t logarithmic_accumulation(struct timekeeper *tk, cycle_t offset,
-						u32 shift)
+						u32 shift,
+						unsigned int *clock_set)
 {
 	cycle_t interval = tk->cycle_interval << shift;
 	u64 raw_nsecs;
@@ -1309,7 +1310,7 @@ static cycle_t logarithmic_accumulation(
 	tk->cycle_last += interval;
 
 	tk->xtime_nsec += tk->xtime_interval << shift;
-	accumulate_nsecs_to_secs(tk);
+	*clock_set |= accumulate_nsecs_to_secs(tk);
 
 	/* Accumulate raw time */
 	raw_nsecs = (u64)tk->raw_interval << shift;
@@ -1367,7 +1368,7 @@ static void update_wall_time(void)
 	struct timekeeper *tk = &shadow_timekeeper;
 	cycle_t offset;
 	int shift = 0, maxshift;
-	unsigned int action;
+	unsigned int clock_set = 0;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&timekeeper_lock, flags);
@@ -1402,7 +1403,8 @@ static void update_wall_time(void)
 	maxshift = (64 - (ilog2(ntp_tick_length())+1)) - 1;
 	shift = min(shift, maxshift);
 	while (offset >= tk->cycle_interval) {
-		offset = logarithmic_accumulation(tk, offset, shift);
+		offset = logarithmic_accumulation(tk, offset, shift,
+							&clock_set);
 		if (offset < tk->cycle_interval<<shift)
 			shift--;
 	}
@@ -1420,7 +1422,7 @@ static void update_wall_time(void)
 	 * Finally, make sure that after the rounding
 	 * xtime_nsec isn't larger than NSEC_PER_SEC
 	 */
-	action = accumulate_nsecs_to_secs(tk);
+	clock_set |= accumulate_nsecs_to_secs(tk);
 
 	write_seqcount_begin(&timekeeper_seq);
 	/* Update clock->cycle_last with the new value */
@@ -1436,7 +1438,7 @@ static void update_wall_time(void)
 	 * updating.
 	 */
 	memcpy(real_tk, tk, sizeof(*tk));
-	timekeeping_update(real_tk, action);
+	timekeeping_update(real_tk, clock_set);
 	write_seqcount_end(&timekeeper_seq);
 out:
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);

[PATCH 3.12 101/107] timekeeping: Avoid possible deadlock from clock_was_set_delayed

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 6fdda9a9c5db367130cf32df5d6618d08b89f46a upstream.

As part of normal operaions, the hrtimer subsystem frequently calls
into the timekeeping code, creating a locking order of
  hrtimer locks -> timekeeping locks

clock_was_set_delayed() was suppoed to allow us to avoid deadlocks
between the timekeeping the hrtimer subsystem, so that we could
notify the hrtimer subsytem the time had changed while holding
the timekeeping locks. This was done by scheduling delayed work
that would run later once we were out of the timekeeing code.

But unfortunately the lock chains are complex enoguh that in
scheduling delayed work, we end up eventually trying to grab
an hrtimer lock.

Sasha Levin noticed this in testing when the new seqlock lockdep
enablement triggered the following (somewhat abrieviated) message:

[  251.100221] ======================================================
[  251.100221] [ INFO: possible circular locking dependency detected ]
[  251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted
[  251.101967] -------------------------------------------------------
[  251.101967] kworker/10:1/4506 is trying to acquire lock:
[  251.101967]  (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70
[  251.101967]
[  251.101967] but task is already holding lock:
[  251.101967]  (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[  251.101967]
[  251.101967] which lock already depends on the new lock.
[  251.101967]
[  251.101967]
[  251.101967] the existing dependency chain (in reverse order) is:
[  251.101967]
-> #5 (hrtimer_bases.lock#11){-.-...}:
[snipped]
-> #4 (&rt_b->rt_runtime_lock){-.-...}:
[snipped]
-> #3 (&rq->lock){-.-.-.}:
[snipped]
-> #2 (&p->pi_lock){-.-.-.}:
[snipped]
-> #1 (&(&pool->lock)->rlock){-.-...}:
[  251.101967]        [<ffffffff81194803>] validate_chain+0x6c3/0x7b0
[  251.101967]        [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580
[  251.101967]        [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0
[  251.101967]        [<ffffffff84398500>] _raw_spin_lock+0x40/0x80
[  251.101967]        [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0
[  251.101967]        [<ffffffff81154168>] queue_work_on+0x98/0x120
[  251.101967]        [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30
[  251.101967]        [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160
[  251.101967]        [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70
[  251.101967]        [<ffffffff843a4b49>] ia32_sysret+0x0/0x5
[  251.101967]
-> #0 (timekeeper_seq){----..}:
[snipped]
[  251.101967] other info that might help us debug this:
[  251.101967]
[  251.101967] Chain exists of:
  timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11

[  251.101967]  Possible unsafe locking scenario:
[  251.101967]
[  251.101967]        CPU0                    CPU1
[  251.101967]        ----                    ----
[  251.101967]   lock(hrtimer_bases.lock#11);
[  251.101967]                                lock(&rt_b->rt_runtime_lock);
[  251.101967]                                lock(hrtimer_bases.lock#11);
[  251.101967]   lock(timekeeper_seq);
[  251.101967]
[  251.101967]  *** DEADLOCK ***
[  251.101967]
[  251.101967] 3 locks held by kworker/10:1/4506:
[  251.101967]  #0:  (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[  251.101967]  #1:  (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530
[  251.101967]  #2:  (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70
[  251.101967]
[  251.101967] stack backtrace:
[  251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053
[  251.101967] Workqueue: events clock_was_set_work

So the best solution is to avoid calling clock_was_set_delayed() while
holding the timekeeping lock, and instead using a flag variable to
decide if we should call clock_was_set() once we've released the locks.

This works for the case here, where the do_adjtimex() was the deadlock
trigger point. Unfortuantely, in update_wall_time() we still hold
the jiffies lock, which would deadlock with the ipi triggered by
clock_was_set(), preventing us from calling it even after we drop the
timekeeping lock. So instead call clock_was_set_delayed() at that point.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 051855fe68bc..d62682b6df4a 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1278,7 +1278,6 @@ static inline unsigned int accumulate_nsecs_to_secs(struct timekeeper *tk)
 
 			__timekeeping_set_tai_offset(tk, tk->tai_offset - leap);
 
-			clock_was_set_delayed();
 			clock_set = TK_CLOCK_WAS_SET;
 		}
 	}
@@ -1442,6 +1441,19 @@ static void update_wall_time(void)
 	write_seqcount_end(&timekeeper_seq);
 out:
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
+	if (clock_was_set) {
+		/*
+		 * XXX -  I'd rather we just call clock_was_set(), but
+		 * since we're currently holding the jiffies lock, calling
+		 * clock_was_set would trigger an ipi which would then grab
+		 * the jiffies lock and we'd deadlock. :(
+		 * The right solution should probably be droping
+		 * the jiffies lock before calling update_wall_time
+		 * but that requires some rework of the tick sched
+		 * code.
+		 */
+		clock_was_set_delayed();
+	}
 }
 
 /**
@@ -1702,11 +1714,13 @@ int do_adjtimex(struct timex *txc)
 	if (tai != orig_tai) {
 		__timekeeping_set_tai_offset(tk, tai);
 		timekeeping_update(tk, TK_MIRROR | TK_CLOCK_WAS_SET);
-		clock_was_set_delayed();
 	}
 	write_seqcount_end(&timekeeper_seq);
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
 
+	if (tai != orig_tai)
+		clock_was_set();
+
 	ntp_notify_cmos_timer();
 
 	return ret;

[PATCH 3.12 102/107] 3.13.y: timekeeping: Fix clock_set/clock_was_set think-o

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

In backporting 6fdda9a9c5db367130cf32df5d6618d08b89f46a
(timekeeping: Avoid possible deadlock from clock_was_set_delayed),
I ralized the patch had a think-o where instead of checking
clock_set I accidentally typed clock_was_set (which is a function
- so the conditional always is true).

Upstream this was resolved in the immediately following patch
47a1b796306356f358e515149d86baf0cc6bf007 (tick/timekeeping: Call
update_wall_time outside the jiffies lock). But since that patch
really isn't -stable material, so this patch only pulls
the name change.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 kernel/time/timekeeping.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1441,7 +1441,7 @@ static void update_wall_time(void)
 	write_seqcount_end(&timekeeper_seq);
 out:
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
-	if (clock_was_set) {
+	if (clock_set) {
 		/*
 		 * XXX -  I'd rather we just call clock_was_set(), but
 		 * since we're currently holding the jiffies lock, calling

[PATCH 3.12 103/107] timekeeping: Fix CLOCK_TAI timer/nanosleep delays

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 04005f6011e3b504cd4d791d9769f7cb9a3b2eae upstream.

A think-o in the calculation of the monotonic -> tai time offset
results in CLOCK_TAI timers and nanosleeps to expire late (the
latency is ~2x the tai offset).

Fix this by adding the tai offset from the realtime offset instead
of subtracting.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -77,7 +77,7 @@ static void tk_set_wall_to_mono(struct t
 	tk->wall_to_monotonic = wtm;
 	set_normalized_timespec(&tmp, -wtm.tv_sec, -wtm.tv_nsec);
 	tk->offs_real = timespec_to_ktime(tmp);
-	tk->offs_tai = ktime_sub(tk->offs_real, ktime_set(tk->tai_offset, 0));
+	tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tk->tai_offset, 0));
 }
 
 static void tk_set_sleep_time(struct timekeeper *tk, struct timespec t)
@@ -595,7 +595,7 @@ s32 timekeeping_get_tai_offset(void)
 static void __timekeeping_set_tai_offset(struct timekeeper *tk, s32 tai_offset)
 {
 	tk->tai_offset = tai_offset;
-	tk->offs_tai = ktime_sub(tk->offs_real, ktime_set(tai_offset, 0));
+	tk->offs_tai = ktime_add(tk->offs_real, ktime_set(tai_offset, 0));
 }
 
 /**

[PATCH 3.12 104/107] timekeeping: Fix missing timekeeping_update in suspend path

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: John Stultz <john.stultz@linaro.org>

commit 330a1617b0a6268d427aa5922c94d082b1d3e96d upstream.

Since 48cdc135d4840 (Implement a shadow timekeeper), we have to
call timekeeping_update() after any adjustment to the timekeeping
structure in order to make sure that any adjustments to the structure
persist.

In the timekeeping suspend path, we udpate the timekeeper
structure, so we should be sure to update the shadow-timekeeper
before releasing the timekeeping locks. Currently this isn't done.

In most cases, the next time related code to run would be
timekeeping_resume, which does update the shadow-timekeeper, but
in an abundence of caution, this patch adds the call to
timekeeping_update() in the suspend path.

Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/timekeeping.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -1024,6 +1024,8 @@ static int timekeeping_suspend(void)
 		timekeeping_suspend_time =
 			timespec_add(timekeeping_suspend_time, delta_delta);
 	}
+
+	timekeeping_update(tk, TK_MIRROR);
 	write_seqcount_end(&timekeeper_seq);
 	raw_spin_unlock_irqrestore(&timekeeper_lock, flags);
 

[PATCH 3.12 105/107] rtc-cmos: Add an alarm disable quirk

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Borislav Petkov <bp@alien8.de>

commit d5a1c7e3fc38d9c7d629e1e47f32f863acbdec3d upstream.

41c7f7424259f ("rtc: Disable the alarm in the hardware (v2)") added the
functionality to disable the RTC wake alarm when shutting down the box.

However, there are at least two b0rked BIOSes we know about:

https://bugzilla.novell.com/show_bug.cgi?id=812592
https://bugzilla.novell.com/show_bug.cgi?id=805740

where, when wakeup alarm is enabled in the BIOS, the machine reboots
automatically right after shutdown, regardless of what wakeup time is
programmed.

Bisecting the issue lead to this patch so disable its functionality with
a DMI quirk only for those boxes.

Cc: Brecht Machiels <brecht@mos6581.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
[jstultz: Changed variable name for clarity, added extra dmi entry]
Tested-by: Brecht Machiels <brecht@mos6581.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-cmos.c |   52 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 51 insertions(+), 1 deletion(-)

--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -34,11 +34,11 @@
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
-#include <linux/mod_devicetable.h>
 #include <linux/log2.h>
 #include <linux/pm.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
+#include <linux/dmi.h>
 
 /* this is for "generic access to PC-style RTC" using CMOS_READ/CMOS_WRITE */
 #include <asm-generic/rtc.h>
@@ -377,6 +377,51 @@ static int cmos_set_alarm(struct device
 	return 0;
 }
 
+/*
+ * Do not disable RTC alarm on shutdown - workaround for b0rked BIOSes.
+ */
+static bool alarm_disable_quirk;
+
+static int __init set_alarm_disable_quirk(const struct dmi_system_id *id)
+{
+	alarm_disable_quirk = true;
+	pr_info("rtc-cmos: BIOS has alarm-disable quirk. ");
+	pr_info("RTC alarms disabled\n");
+	return 0;
+}
+
+static const struct dmi_system_id rtc_quirks[] __initconst = {
+	/* https://bugzilla.novell.com/show_bug.cgi?id=805740 */
+	{
+		.callback = set_alarm_disable_quirk,
+		.ident    = "IBM Truman",
+		.matches  = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "4852570"),
+		},
+	},
+	/* https://bugzilla.novell.com/show_bug.cgi?id=812592 */
+	{
+		.callback = set_alarm_disable_quirk,
+		.ident    = "Gigabyte GA-990XA-UD3",
+		.matches  = {
+			DMI_MATCH(DMI_SYS_VENDOR,
+					"Gigabyte Technology Co., Ltd."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "GA-990XA-UD3"),
+		},
+	},
+	/* http://permalink.gmane.org/gmane.linux.kernel/1604474 */
+	{
+		.callback = set_alarm_disable_quirk,
+		.ident    = "Toshiba Satellite L300",
+		.matches  = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite L300"),
+		},
+	},
+	{}
+};
+
 static int cmos_alarm_irq_enable(struct device *dev, unsigned int enabled)
 {
 	struct cmos_rtc	*cmos = dev_get_drvdata(dev);
@@ -385,6 +430,9 @@ static int cmos_alarm_irq_enable(struct
 	if (!is_valid_irq(cmos->irq))
 		return -EINVAL;
 
+	if (alarm_disable_quirk)
+		return 0;
+
 	spin_lock_irqsave(&rtc_lock, flags);
 
 	if (enabled)
@@ -1158,6 +1206,8 @@ static int __init cmos_init(void)
 			platform_driver_registered = true;
 	}
 
+	dmi_check_system(rtc_quirks);
+
 	if (retval == 0)
 		return 0;
 

[PATCH 3.12 106/107] mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

commit 77a0122e0838663795651aa0beb2325156f98c09 upstream.

A host controller for a SD card may need a GPIO for card detect in order
to wake up from runtime suspend when a card is inserted.  If that GPIO is
not configured, then the host controller will not wake up.  Fix that for
the affected devices by not enabling runtime PM unless the GPIO is
successfully set up.

This affects BYT sd card host controller which had runtime PM enabled from
v3.11.  For completeness, the MFD sd card host controller is flagged also.

The original patch before rebasing (see link below) was tested on v3.11.10
and v3.12.4 although the patch applied with some offsets and fuzz.  The
original patch is here:

    http://marc.info/?l=linux-mmc&m=138676702327057

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-pci.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -59,6 +59,7 @@ struct sdhci_pci_fixes {
 	unsigned int		quirks;
 	unsigned int		quirks2;
 	bool			allow_runtime_pm;
+	bool			own_cd_for_runtime_pm;
 
 	int			(*probe) (struct sdhci_pci_chip *);
 
@@ -290,6 +291,7 @@ static const struct sdhci_pci_fixes sdhc
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sd = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.allow_runtime_pm = true,
+	.own_cd_for_runtime_pm = true,
 };
 
 static const struct sdhci_pci_fixes sdhci_intel_mfd_sdio = {
@@ -354,6 +356,7 @@ static const struct sdhci_pci_fixes sdhc
 static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
 	.quirks2	= SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON,
 	.allow_runtime_pm = true,
+	.own_cd_for_runtime_pm = true,
 };
 
 /* O2Micro extra registers */
@@ -1381,6 +1384,14 @@ static struct sdhci_pci_slot *sdhci_pci_
 
 	sdhci_pci_add_own_cd(slot);
 
+	/*
+	 * Check if the chip needs a separate GPIO for card detect to wake up
+	 * from runtime suspend.  If it is not there, don't allow runtime PM.
+	 * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
+	 */
+	if (chip->fixes->own_cd_for_runtime_pm && !gpio_is_valid(slot->cd_gpio))
+		chip->allow_runtime_pm = false;
+
 	return slot;
 
 remove:

[PATCH 3.12 107/107] mmc: sdhci-pci: Fix possibility of chip->fixes being null

[Greg Kroah-Hartman]

3.12-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

commit 945be38caa287b177b8c17ffaae7754cab6a658f upstream.

It is possible for chip->fixes to be null.  Check before dereferencing it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci-pci.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -1389,7 +1389,8 @@ static struct sdhci_pci_slot *sdhci_pci_
 	 * from runtime suspend.  If it is not there, don't allow runtime PM.
 	 * Note sdhci_pci_add_own_cd() sets slot->cd_gpio to -EINVAL on failure.
 	 */
-	if (chip->fixes->own_cd_for_runtime_pm && !gpio_is_valid(slot->cd_gpio))
+	if (chip->fixes && chip->fixes->own_cd_for_runtime_pm &&
+	    !gpio_is_valid(slot->cd_gpio))
 		chip->allow_runtime_pm = false;
 
 	return slot;

Re: [PATCH 3.12 000/107] 3.12.11-stable review

[Guenter Roeck]

On Tue, Feb 11, 2014 at 11:04:26AM -0800, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.12.11 release.
> There are 107 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Thu Feb 13 18:47:29 UTC 2014.
> Anything received after that time might be too late.
> 

Build results:
	total: 126 pass: 121 skipped: 5 fail: 0

qemu tests all passed.

Results are as expected.

Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.12 000/107] 3.12.11-stable review

[Shuah Khan]

On 02/11/2014 12:04 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.12.11 release.
> There are 107 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Feb 13 18:47:29 UTC 2014.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.12.11-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Worked fine on all my test systems. Compile tests and boot tests passed. 
No dmesg regressions: emerg, crit, alert, err are clean. No regressions 
in warn.

-- Shuah

-- 
Shuah Khan
Senior Linux Kernel Developer - Open Source Group
Samsung Research America(Silicon Valley)
shuah.kh@samsung.com | (970) 672-0658

Re: [PATCH 3.12 037/107] spidev: fix hang when transfer_one_message fails

[Geert Uytterhoeven]

On Tue, Feb 11, 2014 at 8:05 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> 3.12-stable review patch.  If anyone has any objections, please let me know.

Sorry for not noticing this was queued up for stable before, but this
patch was reverted in mainline:

commit 1f802f8249a0da536877842c43c7204064c4de8b
Author: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Date:   Tue Jan 28 10:33:03 2014 +0100

    spi: Fix crash with double message finalisation on error handling

    This reverts commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d.

    It causes a NULL pointer dereference with drivers using the generic
    spi_transfer_one_message(), which always calls
    spi_finalize_current_message(), which zeroes master->cur_msg.

    Drivers implementing transfer_one_message() theirselves must always call
    spi_finalize_current_message(), even if the transfer failed:

     * @transfer_one_message: the subsystem calls the driver to transfer a singl
     *      message while queuing transfers that arrive in the meantime. When th
     *      driver is finished with this message, it must call
     *      spi_finalize_current_message() so the subsystem can issue the next
     *      transfer

    Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
    Signed-off-by: Mark Brown <broonie@linaro.org>

> ------------------
>
> From: Daniel Santos <daniel.santos@pobox.com>
>
> commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d upstream.
>
> This corrects a problem in spi_pump_messages() that leads to an spi
> message hanging forever when a call to transfer_one_message() fails.
> This failure occurs in my MCP2210 driver when the cs_change bit is set
> on the last transfer in a message, an operation which the hardware does
> not support.
>
> Rationale
> Since the transfer_one_message() returns an int, we must presume that it
> may fail.  If transfer_one_message() should never fail, it should return
> void.  Thus, calls to transfer_one_message() should properly manage a
> failure.
>
> Fixes: ffbbdd21329f3 (spi: create a message queueing infrastructure)
> Signed-off-by: Daniel Santos <daniel.santos@pobox.com>
> Signed-off-by: Mark Brown <broonie@linaro.org>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
>  drivers/spi/spi.c |    4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -600,7 +600,9 @@ static void spi_pump_messages(struct kth
>         ret = master->transfer_one_message(master, master->cur_msg);
>         if (ret) {
>                 dev_err(&master->dev,
> -                       "failed to transfer one message from queue\n");
> +                       "failed to transfer one message from queue: %d\n", ret);
> +               master->cur_msg->status = ret;
> +               spi_finalize_current_message(master);
>                 return;
>         }
>  }

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH 3.12 037/107] spidev: fix hang when transfer_one_message fails

[Greg Kroah-Hartman]

On Thu, Feb 20, 2014 at 01:42:08PM +0100, Geert Uytterhoeven wrote:
> On Tue, Feb 11, 2014 at 8:05 PM, Greg Kroah-Hartman
> <gregkh@linuxfoundation.org> wrote:
> > 3.12-stable review patch.  If anyone has any objections, please let me know.
> 
> Sorry for not noticing this was queued up for stable before, but this
> patch was reverted in mainline:
> 
> commit 1f802f8249a0da536877842c43c7204064c4de8b
> Author: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
> Date:   Tue Jan 28 10:33:03 2014 +0100
> 
>     spi: Fix crash with double message finalisation on error handling
> 
>     This reverts commit e120cc0dcf2880a4c5c0a6cb27b655600a1cfa1d.
> 
>     It causes a NULL pointer dereference with drivers using the generic
>     spi_transfer_one_message(), which always calls
>     spi_finalize_current_message(), which zeroes master->cur_msg.
> 
>     Drivers implementing transfer_one_message() theirselves must always call
>     spi_finalize_current_message(), even if the transfer failed:
> 
>      * @transfer_one_message: the subsystem calls the driver to transfer a singl
>      *      message while queuing transfers that arrive in the meantime. When th
>      *      driver is finished with this message, it must call
>      *      spi_finalize_current_message() so the subsystem can issue the next
>      *      transfer
> 
>     Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
>     Signed-off-by: Mark Brown <broonie@linaro.org>

Thanks for catching this, I've queued it up now.

greg k-h