* [PATCH v2] xfstests: test for atime-related mount options
@ 2014-02-17 20:25 ` Koen De Wit
0 siblings, 0 replies; 6+ messages in thread
From: Koen De Wit @ 2014-02-17 20:25 UTC (permalink / raw)
To: xfs; +Cc: linux-btrfs, Koen De Wit
Tests the noatime, relatime, strictatime and nodiratime mount options.
There is an extra check for Btrfs to ensure that the access time is
never updated on read-only subvolumes. (Regression test for bug fixed
with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
---
v1->v2:
- Fix typo in _cleanup()
- Explicitly passing relatime mount option
- Adding _require_relatime method to common/rc
- Adding extra test for read-only mounts
diff --git a/common/rc b/common/rc
index e91568b..e55d09e 100644
--- a/common/rc
+++ b/common/rc
@@ -2159,6 +2159,14 @@ _verify_reflink()
|| echo "$1 and $2 are not reflinks: different extents"
}
+_require_relatime()
+{
+ _scratch_mkfs > /dev/null 2>&1
+ _mount -t $FSTYP -o relatime $SCRATCH_DEV $SCRATCH_MNT || \
+ _notrun "relatime not supported by the current kernel"
+ _scratch_unmount
+}
+
_create_loop_device()
{
file=$1
diff --git a/tests/generic/323 b/tests/generic/323
new file mode 100644
index 0000000..54f2739
--- /dev/null
+++ b/tests/generic/323
@@ -0,0 +1,199 @@
+# Tests the noatime, relatime, strictatime and nodiratime mount options.
+# There is an extra check for Btrfs to ensure that the access time is
+# never updated on read-only subvolumes. (Regression test for bug fixed
+# with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_relatime
+
+rm -f $seqres.full
+
+_stat() {
+ stat --printf="%x;%y;%z" $1
+}
+
+_compare_stat_times() {
+ updated=$1 # 3 chars indicating if access, modify and
+ # change times should be updated (Y) or not (N)
+ IFS=';' read -a first_stat <<< "$2" # Convert first stat to array
+ IFS=';' read -a second_stat <<< "$3" # Convert second stat to array
+ test_step=$4 # Will be printed to output stream in case of an
+ # error, to make debugging easier
+ types=( access modify change )
+
+ for i in 0 1 2; do
+ if [ "${first_stat[$i]}" == "${second_stat[$i]}" ]; then
+ if [ "${updated:$i:1}" == "Y" ]; then
+ echo -n "ERROR: ${types[$i]} time has not been updated "
+ echo $test_step
+ fi
+ else
+ if [ "${updated:$i:1}" == "N" ]; then
+ echo -n "ERROR: ${types[$i]} time has changed "
+ echo $test_step
+ fi
+ fi
+ done
+}
+
+_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
+_scratch_mount "-o relatime"
+
+if [ "$FSTYP" = "btrfs" ]; then
+ TPATH=$SCRATCH_MNT/sub1
+ $BTRFS_UTIL_PROG subvolume create $TPATH > $seqres.full
+else
+ TPATH=$SCRATCH_MNT
+fi
+
+mkdir $TPATH/dir1
+echo "aaa" > $TPATH/dir1/file1
+file1_stat_before_first_access=`_stat $TPATH/dir1/file1`
+
+# Accessing file1 the first time
+cat $TPATH/dir1/file1 > /dev/null
+file1_stat_after_first_access=`_stat $TPATH/dir1/file1`
+_compare_stat_times YNN "$file1_stat_before_first_access" \
+ "$file1_stat_after_first_access" "after accessing file1 first time"
+
+# Accessing file1 a second time
+cat $TPATH/dir1/file1 > /dev/null
+file1_stat_after_second_access=`_stat $TPATH/dir1/file1`
+_compare_stat_times NNN "$file1_stat_after_first_access" \
+ "$file1_stat_after_second_access" "after accessing file1 second time"
+
+# Remounting with nodiratime option
+_scratch_unmount
+_scratch_mount "-o nodiratime"
+file1_stat_after_remount=`_stat $TPATH/dir1/file1`
+_compare_stat_times NNN "$file1_stat_after_second_access" \
+ "$file1_stat_after_remount" "for file1 after remount"
+
+# Creating dir2 and file2, checking directory stats
+mkdir $TPATH/dir2
+dir2_stat_before_file_creation=`_stat $TPATH/dir2`
+echo "bbb" > $TPATH/dir2/file2
+dir2_stat_after_file_creation=`_stat $TPATH/dir2`
+_compare_stat_times NYY "$dir2_stat_before_file_creation" \
+ "$dir2_stat_after_file_creation" "for dir2 after file creation"
+
+# Accessing file2
+file2_stat_before_first_access=`_stat $TPATH/dir2/file2`
+cat $TPATH/dir2/file2 > /dev/null
+file2_stat_after_first_access=`_stat $TPATH/dir2/file2`
+_compare_stat_times YNN "$file2_stat_before_first_access" \
+ "$file2_stat_after_first_access" "after accessing file2"
+dir2_stat_after_file_access=`_stat $TPATH/dir2`
+_compare_stat_times NNN "$dir2_stat_after_file_creation" \
+ "$dir2_stat_after_file_access" "for dir2 after file access"
+
+# Remounting with noatime option, creating a file and accessing it
+_scratch_unmount
+_scratch_mount "-o noatime"
+echo "ccc" > $TPATH/dir2/file3
+file3_stat_before_first_access=`_stat $TPATH/dir2/file3`
+cat $TPATH/dir2/file3 > /dev/null
+file3_stat_after_first_access=`_stat $TPATH/dir2/file3`
+_compare_stat_times NNN "$file3_stat_before_first_access" \
+ "$file3_stat_after_first_access" "after accessing file3 first time"
+
+# Checking that the modify and change times are still updated
+file1_stat_before_modify=`_stat $TPATH/dir1/file1`
+echo "xyz" > $TPATH/dir1/file1
+file1_stat_after_modify=`_stat $TPATH/dir1/file1`
+_compare_stat_times NYY "$file1_stat_before_modify" \
+ "$file1_stat_after_modify" "after modifying file1"
+mv $TPATH/dir1/file1 $TPATH/dir1/file1_renamed
+file1_stat_after_change=`_stat $TPATH/dir1/file1_renamed`
+_compare_stat_times NNY "$file1_stat_after_modify" \
+ "$file1_stat_after_change" "after changing file1"
+
+# Remounting with strictatime option and
+# accessing a previously created file twice
+_scratch_unmount
+_scratch_mount "-o strictatime"
+cat $TPATH/dir2/file3 > /dev/null
+file3_stat_after_second_access=`_stat $TPATH/dir2/file3`
+_compare_stat_times YNN "$file3_stat_after_first_access" \
+ "$file3_stat_after_second_access" "after accessing file3 second time"
+cat $TPATH/dir2/file3 > /dev/null
+file3_stat_after_third_access=`_stat $TPATH/dir2/file3`
+_compare_stat_times YNN "$file3_stat_after_second_access" \
+ "$file3_stat_after_third_access" "after accessing file3 third time"
+
+# Btrfs only: Creating readonly snapshot. Access time should never
+# be updated, even when the strictatime mount option is active
+if [ "$FSTYP" = "btrfs" ]; then
+ SPATH=$SCRATCH_MNT/snap1
+ btrfs subvol snapshot -r $TPATH $SPATH >> $seqres.full
+ dir2_stat_readonly_before_access=`_stat $SPATH/dir2`
+ ls $SPATH/dir2 >> $seqres.full
+ cat $SPATH/dir2/file3 >> $seqres.full
+ dir2_stat_readonly_after_access=`_stat $SPATH/dir2`
+ _compare_stat_times NNN "$dir2_stat_readonly_before_access" \
+ "$dir2_stat_readonly_after_access" "for dir in readonly subvol"
+ file3_stat_readonly_after_access=`_stat $SPATH/dir2/file3`
+ _compare_stat_times NNN "$file3_stat_after_third_access" \
+ "$file3_stat_readonly_after_access" "for file in readonly subvol"
+fi
+
+# Remounting read-only. Access time should never be updated, despite the
+# strictatime mount option.
+dir2_stat_before_ro_mount=`_stat $TPATH/dir2`
+file3_stat_before_ro_mount=`_stat $TPATH/dir2/file3`
+_scratch_unmount
+_scratch_mount "-o ro,strictatime"
+ls $TPATH/dir2 > /dev/null
+cat $TPATH/dir2/file3 > /dev/null
+dir2_stat_after_ro_mount=`_stat $TPATH/dir2`
+_compare_stat_times NNN "$dir2_stat_before_ro_mount" \
+ "$dir2_stat_after_ro_mount" "for dir in read-only filesystem"
+file3_stat_after_ro_mount=`_stat $TPATH/dir2/file3`
+_compare_stat_times NNN "$file3_stat_before_ro_mount" \
+ "$file3_stat_after_ro_mount" "for file in read-only filesystem"
+
+# success, all done
+_scratch_unmount
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/generic/323.out b/tests/generic/323.out
new file mode 100644
index 0000000..5dba9b5
--- /dev/null
+++ b/tests/generic/323.out
@@ -0,0 +1,2 @@
+QA output created by 323
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index f492461..3a72ee4 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -125,3 +125,4 @@
320 auto rw
321 auto quick metadata log
322 auto quick metadata log
+323 atime auto quick
--
1.7.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2] xfstests: test for atime-related mount options
@ 2014-02-17 20:25 ` Koen De Wit
0 siblings, 0 replies; 6+ messages in thread
From: Koen De Wit @ 2014-02-17 20:25 UTC (permalink / raw)
To: xfs; +Cc: Koen De Wit, linux-btrfs
Tests the noatime, relatime, strictatime and nodiratime mount options.
There is an extra check for Btrfs to ensure that the access time is
never updated on read-only subvolumes. (Regression test for bug fixed
with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
---
v1->v2:
- Fix typo in _cleanup()
- Explicitly passing relatime mount option
- Adding _require_relatime method to common/rc
- Adding extra test for read-only mounts
diff --git a/common/rc b/common/rc
index e91568b..e55d09e 100644
--- a/common/rc
+++ b/common/rc
@@ -2159,6 +2159,14 @@ _verify_reflink()
|| echo "$1 and $2 are not reflinks: different extents"
}
+_require_relatime()
+{
+ _scratch_mkfs > /dev/null 2>&1
+ _mount -t $FSTYP -o relatime $SCRATCH_DEV $SCRATCH_MNT || \
+ _notrun "relatime not supported by the current kernel"
+ _scratch_unmount
+}
+
_create_loop_device()
{
file=$1
diff --git a/tests/generic/323 b/tests/generic/323
new file mode 100644
index 0000000..54f2739
--- /dev/null
+++ b/tests/generic/323
@@ -0,0 +1,199 @@
+# Tests the noatime, relatime, strictatime and nodiratime mount options.
+# There is an extra check for Btrfs to ensure that the access time is
+# never updated on read-only subvolumes. (Regression test for bug fixed
+# with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# real QA test starts here
+
+_supported_fs generic
+_supported_os Linux
+_require_scratch
+_require_relatime
+
+rm -f $seqres.full
+
+_stat() {
+ stat --printf="%x;%y;%z" $1
+}
+
+_compare_stat_times() {
+ updated=$1 # 3 chars indicating if access, modify and
+ # change times should be updated (Y) or not (N)
+ IFS=';' read -a first_stat <<< "$2" # Convert first stat to array
+ IFS=';' read -a second_stat <<< "$3" # Convert second stat to array
+ test_step=$4 # Will be printed to output stream in case of an
+ # error, to make debugging easier
+ types=( access modify change )
+
+ for i in 0 1 2; do
+ if [ "${first_stat[$i]}" == "${second_stat[$i]}" ]; then
+ if [ "${updated:$i:1}" == "Y" ]; then
+ echo -n "ERROR: ${types[$i]} time has not been updated "
+ echo $test_step
+ fi
+ else
+ if [ "${updated:$i:1}" == "N" ]; then
+ echo -n "ERROR: ${types[$i]} time has changed "
+ echo $test_step
+ fi
+ fi
+ done
+}
+
+_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
+_scratch_mount "-o relatime"
+
+if [ "$FSTYP" = "btrfs" ]; then
+ TPATH=$SCRATCH_MNT/sub1
+ $BTRFS_UTIL_PROG subvolume create $TPATH > $seqres.full
+else
+ TPATH=$SCRATCH_MNT
+fi
+
+mkdir $TPATH/dir1
+echo "aaa" > $TPATH/dir1/file1
+file1_stat_before_first_access=`_stat $TPATH/dir1/file1`
+
+# Accessing file1 the first time
+cat $TPATH/dir1/file1 > /dev/null
+file1_stat_after_first_access=`_stat $TPATH/dir1/file1`
+_compare_stat_times YNN "$file1_stat_before_first_access" \
+ "$file1_stat_after_first_access" "after accessing file1 first time"
+
+# Accessing file1 a second time
+cat $TPATH/dir1/file1 > /dev/null
+file1_stat_after_second_access=`_stat $TPATH/dir1/file1`
+_compare_stat_times NNN "$file1_stat_after_first_access" \
+ "$file1_stat_after_second_access" "after accessing file1 second time"
+
+# Remounting with nodiratime option
+_scratch_unmount
+_scratch_mount "-o nodiratime"
+file1_stat_after_remount=`_stat $TPATH/dir1/file1`
+_compare_stat_times NNN "$file1_stat_after_second_access" \
+ "$file1_stat_after_remount" "for file1 after remount"
+
+# Creating dir2 and file2, checking directory stats
+mkdir $TPATH/dir2
+dir2_stat_before_file_creation=`_stat $TPATH/dir2`
+echo "bbb" > $TPATH/dir2/file2
+dir2_stat_after_file_creation=`_stat $TPATH/dir2`
+_compare_stat_times NYY "$dir2_stat_before_file_creation" \
+ "$dir2_stat_after_file_creation" "for dir2 after file creation"
+
+# Accessing file2
+file2_stat_before_first_access=`_stat $TPATH/dir2/file2`
+cat $TPATH/dir2/file2 > /dev/null
+file2_stat_after_first_access=`_stat $TPATH/dir2/file2`
+_compare_stat_times YNN "$file2_stat_before_first_access" \
+ "$file2_stat_after_first_access" "after accessing file2"
+dir2_stat_after_file_access=`_stat $TPATH/dir2`
+_compare_stat_times NNN "$dir2_stat_after_file_creation" \
+ "$dir2_stat_after_file_access" "for dir2 after file access"
+
+# Remounting with noatime option, creating a file and accessing it
+_scratch_unmount
+_scratch_mount "-o noatime"
+echo "ccc" > $TPATH/dir2/file3
+file3_stat_before_first_access=`_stat $TPATH/dir2/file3`
+cat $TPATH/dir2/file3 > /dev/null
+file3_stat_after_first_access=`_stat $TPATH/dir2/file3`
+_compare_stat_times NNN "$file3_stat_before_first_access" \
+ "$file3_stat_after_first_access" "after accessing file3 first time"
+
+# Checking that the modify and change times are still updated
+file1_stat_before_modify=`_stat $TPATH/dir1/file1`
+echo "xyz" > $TPATH/dir1/file1
+file1_stat_after_modify=`_stat $TPATH/dir1/file1`
+_compare_stat_times NYY "$file1_stat_before_modify" \
+ "$file1_stat_after_modify" "after modifying file1"
+mv $TPATH/dir1/file1 $TPATH/dir1/file1_renamed
+file1_stat_after_change=`_stat $TPATH/dir1/file1_renamed`
+_compare_stat_times NNY "$file1_stat_after_modify" \
+ "$file1_stat_after_change" "after changing file1"
+
+# Remounting with strictatime option and
+# accessing a previously created file twice
+_scratch_unmount
+_scratch_mount "-o strictatime"
+cat $TPATH/dir2/file3 > /dev/null
+file3_stat_after_second_access=`_stat $TPATH/dir2/file3`
+_compare_stat_times YNN "$file3_stat_after_first_access" \
+ "$file3_stat_after_second_access" "after accessing file3 second time"
+cat $TPATH/dir2/file3 > /dev/null
+file3_stat_after_third_access=`_stat $TPATH/dir2/file3`
+_compare_stat_times YNN "$file3_stat_after_second_access" \
+ "$file3_stat_after_third_access" "after accessing file3 third time"
+
+# Btrfs only: Creating readonly snapshot. Access time should never
+# be updated, even when the strictatime mount option is active
+if [ "$FSTYP" = "btrfs" ]; then
+ SPATH=$SCRATCH_MNT/snap1
+ btrfs subvol snapshot -r $TPATH $SPATH >> $seqres.full
+ dir2_stat_readonly_before_access=`_stat $SPATH/dir2`
+ ls $SPATH/dir2 >> $seqres.full
+ cat $SPATH/dir2/file3 >> $seqres.full
+ dir2_stat_readonly_after_access=`_stat $SPATH/dir2`
+ _compare_stat_times NNN "$dir2_stat_readonly_before_access" \
+ "$dir2_stat_readonly_after_access" "for dir in readonly subvol"
+ file3_stat_readonly_after_access=`_stat $SPATH/dir2/file3`
+ _compare_stat_times NNN "$file3_stat_after_third_access" \
+ "$file3_stat_readonly_after_access" "for file in readonly subvol"
+fi
+
+# Remounting read-only. Access time should never be updated, despite the
+# strictatime mount option.
+dir2_stat_before_ro_mount=`_stat $TPATH/dir2`
+file3_stat_before_ro_mount=`_stat $TPATH/dir2/file3`
+_scratch_unmount
+_scratch_mount "-o ro,strictatime"
+ls $TPATH/dir2 > /dev/null
+cat $TPATH/dir2/file3 > /dev/null
+dir2_stat_after_ro_mount=`_stat $TPATH/dir2`
+_compare_stat_times NNN "$dir2_stat_before_ro_mount" \
+ "$dir2_stat_after_ro_mount" "for dir in read-only filesystem"
+file3_stat_after_ro_mount=`_stat $TPATH/dir2/file3`
+_compare_stat_times NNN "$file3_stat_before_ro_mount" \
+ "$file3_stat_after_ro_mount" "for file in read-only filesystem"
+
+# success, all done
+_scratch_unmount
+echo "Silence is golden"
+status=0
+exit
diff --git a/tests/generic/323.out b/tests/generic/323.out
new file mode 100644
index 0000000..5dba9b5
--- /dev/null
+++ b/tests/generic/323.out
@@ -0,0 +1,2 @@
+QA output created by 323
+Silence is golden
diff --git a/tests/generic/group b/tests/generic/group
index f492461..3a72ee4 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -125,3 +125,4 @@
320 auto rw
321 auto quick metadata log
322 auto quick metadata log
+323 atime auto quick
--
1.7.1
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2] xfstests: test for atime-related mount options
2014-02-17 20:25 ` Koen De Wit
@ 2014-02-17 20:40 ` Eric Sandeen
-1 siblings, 0 replies; 6+ messages in thread
From: Eric Sandeen @ 2014-02-17 20:40 UTC (permalink / raw)
To: Koen De Wit, xfs; +Cc: linux-btrfs
On 2/17/14, 2:25 PM, Koen De Wit wrote:
> Tests the noatime, relatime, strictatime and nodiratime mount options.
>
> There is an extra check for Btrfs to ensure that the access time is
> never updated on read-only subvolumes. (Regression test for bug fixed
> with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
I think this looks ok. Only little nit is that _require_relatime
now implicitly requires scratch, but *shrug* it was Dave's idea. ;)
Thanks!
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
> Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
> ---
>
> v1->v2:
> - Fix typo in _cleanup()
> - Explicitly passing relatime mount option
> - Adding _require_relatime method to common/rc
> - Adding extra test for read-only mounts
>
> diff --git a/common/rc b/common/rc
> index e91568b..e55d09e 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2159,6 +2159,14 @@ _verify_reflink()
> || echo "$1 and $2 are not reflinks: different extents"
> }
>
> +_require_relatime()
> +{
> + _scratch_mkfs > /dev/null 2>&1
> + _mount -t $FSTYP -o relatime $SCRATCH_DEV $SCRATCH_MNT || \
> + _notrun "relatime not supported by the current kernel"
> + _scratch_unmount
> +}
> +
> _create_loop_device()
> {
> file=$1
> diff --git a/tests/generic/323 b/tests/generic/323
> new file mode 100644
> index 0000000..54f2739
> --- /dev/null
> +++ b/tests/generic/323
> @@ -0,0 +1,199 @@
> +# Tests the noatime, relatime, strictatime and nodiratime mount options.
> +# There is an extra check for Btrfs to ensure that the access time is
> +# never updated on read-only subvolumes. (Regression test for bug fixed
> +# with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -rf $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch
> +_require_relatime
> +
> +rm -f $seqres.full
> +
> +_stat() {
> + stat --printf="%x;%y;%z" $1
> +}
> +
> +_compare_stat_times() {
> + updated=$1 # 3 chars indicating if access, modify and
> + # change times should be updated (Y) or not (N)
> + IFS=';' read -a first_stat <<< "$2" # Convert first stat to array
> + IFS=';' read -a second_stat <<< "$3" # Convert second stat to array
> + test_step=$4 # Will be printed to output stream in case of an
> + # error, to make debugging easier
> + types=( access modify change )
> +
> + for i in 0 1 2; do
> + if [ "${first_stat[$i]}" == "${second_stat[$i]}" ]; then
> + if [ "${updated:$i:1}" == "Y" ]; then
> + echo -n "ERROR: ${types[$i]} time has not been updated "
> + echo $test_step
> + fi
> + else
> + if [ "${updated:$i:1}" == "N" ]; then
> + echo -n "ERROR: ${types[$i]} time has changed "
> + echo $test_step
> + fi
> + fi
> + done
> +}
> +
> +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mount "-o relatime"
> +
> +if [ "$FSTYP" = "btrfs" ]; then
> + TPATH=$SCRATCH_MNT/sub1
> + $BTRFS_UTIL_PROG subvolume create $TPATH > $seqres.full
> +else
> + TPATH=$SCRATCH_MNT
> +fi
> +
> +mkdir $TPATH/dir1
> +echo "aaa" > $TPATH/dir1/file1
> +file1_stat_before_first_access=`_stat $TPATH/dir1/file1`
> +
> +# Accessing file1 the first time
> +cat $TPATH/dir1/file1 > /dev/null
> +file1_stat_after_first_access=`_stat $TPATH/dir1/file1`
> +_compare_stat_times YNN "$file1_stat_before_first_access" \
> + "$file1_stat_after_first_access" "after accessing file1 first time"
> +
> +# Accessing file1 a second time
> +cat $TPATH/dir1/file1 > /dev/null
> +file1_stat_after_second_access=`_stat $TPATH/dir1/file1`
> +_compare_stat_times NNN "$file1_stat_after_first_access" \
> + "$file1_stat_after_second_access" "after accessing file1 second time"
> +
> +# Remounting with nodiratime option
> +_scratch_unmount
> +_scratch_mount "-o nodiratime"
> +file1_stat_after_remount=`_stat $TPATH/dir1/file1`
> +_compare_stat_times NNN "$file1_stat_after_second_access" \
> + "$file1_stat_after_remount" "for file1 after remount"
> +
> +# Creating dir2 and file2, checking directory stats
> +mkdir $TPATH/dir2
> +dir2_stat_before_file_creation=`_stat $TPATH/dir2`
> +echo "bbb" > $TPATH/dir2/file2
> +dir2_stat_after_file_creation=`_stat $TPATH/dir2`
> +_compare_stat_times NYY "$dir2_stat_before_file_creation" \
> + "$dir2_stat_after_file_creation" "for dir2 after file creation"
> +
> +# Accessing file2
> +file2_stat_before_first_access=`_stat $TPATH/dir2/file2`
> +cat $TPATH/dir2/file2 > /dev/null
> +file2_stat_after_first_access=`_stat $TPATH/dir2/file2`
> +_compare_stat_times YNN "$file2_stat_before_first_access" \
> + "$file2_stat_after_first_access" "after accessing file2"
> +dir2_stat_after_file_access=`_stat $TPATH/dir2`
> +_compare_stat_times NNN "$dir2_stat_after_file_creation" \
> + "$dir2_stat_after_file_access" "for dir2 after file access"
> +
> +# Remounting with noatime option, creating a file and accessing it
> +_scratch_unmount
> +_scratch_mount "-o noatime"
> +echo "ccc" > $TPATH/dir2/file3
> +file3_stat_before_first_access=`_stat $TPATH/dir2/file3`
> +cat $TPATH/dir2/file3 > /dev/null
> +file3_stat_after_first_access=`_stat $TPATH/dir2/file3`
> +_compare_stat_times NNN "$file3_stat_before_first_access" \
> + "$file3_stat_after_first_access" "after accessing file3 first time"
> +
> +# Checking that the modify and change times are still updated
> +file1_stat_before_modify=`_stat $TPATH/dir1/file1`
> +echo "xyz" > $TPATH/dir1/file1
> +file1_stat_after_modify=`_stat $TPATH/dir1/file1`
> +_compare_stat_times NYY "$file1_stat_before_modify" \
> + "$file1_stat_after_modify" "after modifying file1"
> +mv $TPATH/dir1/file1 $TPATH/dir1/file1_renamed
> +file1_stat_after_change=`_stat $TPATH/dir1/file1_renamed`
> +_compare_stat_times NNY "$file1_stat_after_modify" \
> + "$file1_stat_after_change" "after changing file1"
> +
> +# Remounting with strictatime option and
> +# accessing a previously created file twice
> +_scratch_unmount
> +_scratch_mount "-o strictatime"
> +cat $TPATH/dir2/file3 > /dev/null
> +file3_stat_after_second_access=`_stat $TPATH/dir2/file3`
> +_compare_stat_times YNN "$file3_stat_after_first_access" \
> + "$file3_stat_after_second_access" "after accessing file3 second time"
> +cat $TPATH/dir2/file3 > /dev/null
> +file3_stat_after_third_access=`_stat $TPATH/dir2/file3`
> +_compare_stat_times YNN "$file3_stat_after_second_access" \
> + "$file3_stat_after_third_access" "after accessing file3 third time"
> +
> +# Btrfs only: Creating readonly snapshot. Access time should never
> +# be updated, even when the strictatime mount option is active
> +if [ "$FSTYP" = "btrfs" ]; then
> + SPATH=$SCRATCH_MNT/snap1
> + btrfs subvol snapshot -r $TPATH $SPATH >> $seqres.full
> + dir2_stat_readonly_before_access=`_stat $SPATH/dir2`
> + ls $SPATH/dir2 >> $seqres.full
> + cat $SPATH/dir2/file3 >> $seqres.full
> + dir2_stat_readonly_after_access=`_stat $SPATH/dir2`
> + _compare_stat_times NNN "$dir2_stat_readonly_before_access" \
> + "$dir2_stat_readonly_after_access" "for dir in readonly subvol"
> + file3_stat_readonly_after_access=`_stat $SPATH/dir2/file3`
> + _compare_stat_times NNN "$file3_stat_after_third_access" \
> + "$file3_stat_readonly_after_access" "for file in readonly subvol"
> +fi
> +
> +# Remounting read-only. Access time should never be updated, despite the
> +# strictatime mount option.
> +dir2_stat_before_ro_mount=`_stat $TPATH/dir2`
> +file3_stat_before_ro_mount=`_stat $TPATH/dir2/file3`
> +_scratch_unmount
> +_scratch_mount "-o ro,strictatime"
> +ls $TPATH/dir2 > /dev/null
> +cat $TPATH/dir2/file3 > /dev/null
> +dir2_stat_after_ro_mount=`_stat $TPATH/dir2`
> +_compare_stat_times NNN "$dir2_stat_before_ro_mount" \
> + "$dir2_stat_after_ro_mount" "for dir in read-only filesystem"
> +file3_stat_after_ro_mount=`_stat $TPATH/dir2/file3`
> +_compare_stat_times NNN "$file3_stat_before_ro_mount" \
> + "$file3_stat_after_ro_mount" "for file in read-only filesystem"
> +
> +# success, all done
> +_scratch_unmount
> +echo "Silence is golden"
> +status=0
> +exit
> diff --git a/tests/generic/323.out b/tests/generic/323.out
> new file mode 100644
> index 0000000..5dba9b5
> --- /dev/null
> +++ b/tests/generic/323.out
> @@ -0,0 +1,2 @@
> +QA output created by 323
> +Silence is golden
> diff --git a/tests/generic/group b/tests/generic/group
> index f492461..3a72ee4 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -125,3 +125,4 @@
> 320 auto rw
> 321 auto quick metadata log
> 322 auto quick metadata log
> +323 atime auto quick
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] xfstests: test for atime-related mount options
@ 2014-02-17 20:40 ` Eric Sandeen
0 siblings, 0 replies; 6+ messages in thread
From: Eric Sandeen @ 2014-02-17 20:40 UTC (permalink / raw)
To: Koen De Wit, xfs; +Cc: linux-btrfs
On 2/17/14, 2:25 PM, Koen De Wit wrote:
> Tests the noatime, relatime, strictatime and nodiratime mount options.
>
> There is an extra check for Btrfs to ensure that the access time is
> never updated on read-only subvolumes. (Regression test for bug fixed
> with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
I think this looks ok. Only little nit is that _require_relatime
now implicitly requires scratch, but *shrug* it was Dave's idea. ;)
Thanks!
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
> Signed-off-by: Koen De Wit <koen.de.wit@oracle.com>
> ---
>
> v1->v2:
> - Fix typo in _cleanup()
> - Explicitly passing relatime mount option
> - Adding _require_relatime method to common/rc
> - Adding extra test for read-only mounts
>
> diff --git a/common/rc b/common/rc
> index e91568b..e55d09e 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -2159,6 +2159,14 @@ _verify_reflink()
> || echo "$1 and $2 are not reflinks: different extents"
> }
>
> +_require_relatime()
> +{
> + _scratch_mkfs > /dev/null 2>&1
> + _mount -t $FSTYP -o relatime $SCRATCH_DEV $SCRATCH_MNT || \
> + _notrun "relatime not supported by the current kernel"
> + _scratch_unmount
> +}
> +
> _create_loop_device()
> {
> file=$1
> diff --git a/tests/generic/323 b/tests/generic/323
> new file mode 100644
> index 0000000..54f2739
> --- /dev/null
> +++ b/tests/generic/323
> @@ -0,0 +1,199 @@
> +# Tests the noatime, relatime, strictatime and nodiratime mount options.
> +# There is an extra check for Btrfs to ensure that the access time is
> +# never updated on read-only subvolumes. (Regression test for bug fixed
> +# with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
> +#
> +#-----------------------------------------------------------------------
> +# Copyright (c) 2014, Oracle and/or its affiliates. All Rights Reserved.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation.
> +#
> +# This program is distributed in the hope that it would be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write the Free Software Foundation,
> +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
> +#-----------------------------------------------------------------------
> +
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap "_cleanup; exit \$status" 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -rf $tmp.*
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# real QA test starts here
> +
> +_supported_fs generic
> +_supported_os Linux
> +_require_scratch
> +_require_relatime
> +
> +rm -f $seqres.full
> +
> +_stat() {
> + stat --printf="%x;%y;%z" $1
> +}
> +
> +_compare_stat_times() {
> + updated=$1 # 3 chars indicating if access, modify and
> + # change times should be updated (Y) or not (N)
> + IFS=';' read -a first_stat <<< "$2" # Convert first stat to array
> + IFS=';' read -a second_stat <<< "$3" # Convert second stat to array
> + test_step=$4 # Will be printed to output stream in case of an
> + # error, to make debugging easier
> + types=( access modify change )
> +
> + for i in 0 1 2; do
> + if [ "${first_stat[$i]}" == "${second_stat[$i]}" ]; then
> + if [ "${updated:$i:1}" == "Y" ]; then
> + echo -n "ERROR: ${types[$i]} time has not been updated "
> + echo $test_step
> + fi
> + else
> + if [ "${updated:$i:1}" == "N" ]; then
> + echo -n "ERROR: ${types[$i]} time has changed "
> + echo $test_step
> + fi
> + fi
> + done
> +}
> +
> +_scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed"
> +_scratch_mount "-o relatime"
> +
> +if [ "$FSTYP" = "btrfs" ]; then
> + TPATH=$SCRATCH_MNT/sub1
> + $BTRFS_UTIL_PROG subvolume create $TPATH > $seqres.full
> +else
> + TPATH=$SCRATCH_MNT
> +fi
> +
> +mkdir $TPATH/dir1
> +echo "aaa" > $TPATH/dir1/file1
> +file1_stat_before_first_access=`_stat $TPATH/dir1/file1`
> +
> +# Accessing file1 the first time
> +cat $TPATH/dir1/file1 > /dev/null
> +file1_stat_after_first_access=`_stat $TPATH/dir1/file1`
> +_compare_stat_times YNN "$file1_stat_before_first_access" \
> + "$file1_stat_after_first_access" "after accessing file1 first time"
> +
> +# Accessing file1 a second time
> +cat $TPATH/dir1/file1 > /dev/null
> +file1_stat_after_second_access=`_stat $TPATH/dir1/file1`
> +_compare_stat_times NNN "$file1_stat_after_first_access" \
> + "$file1_stat_after_second_access" "after accessing file1 second time"
> +
> +# Remounting with nodiratime option
> +_scratch_unmount
> +_scratch_mount "-o nodiratime"
> +file1_stat_after_remount=`_stat $TPATH/dir1/file1`
> +_compare_stat_times NNN "$file1_stat_after_second_access" \
> + "$file1_stat_after_remount" "for file1 after remount"
> +
> +# Creating dir2 and file2, checking directory stats
> +mkdir $TPATH/dir2
> +dir2_stat_before_file_creation=`_stat $TPATH/dir2`
> +echo "bbb" > $TPATH/dir2/file2
> +dir2_stat_after_file_creation=`_stat $TPATH/dir2`
> +_compare_stat_times NYY "$dir2_stat_before_file_creation" \
> + "$dir2_stat_after_file_creation" "for dir2 after file creation"
> +
> +# Accessing file2
> +file2_stat_before_first_access=`_stat $TPATH/dir2/file2`
> +cat $TPATH/dir2/file2 > /dev/null
> +file2_stat_after_first_access=`_stat $TPATH/dir2/file2`
> +_compare_stat_times YNN "$file2_stat_before_first_access" \
> + "$file2_stat_after_first_access" "after accessing file2"
> +dir2_stat_after_file_access=`_stat $TPATH/dir2`
> +_compare_stat_times NNN "$dir2_stat_after_file_creation" \
> + "$dir2_stat_after_file_access" "for dir2 after file access"
> +
> +# Remounting with noatime option, creating a file and accessing it
> +_scratch_unmount
> +_scratch_mount "-o noatime"
> +echo "ccc" > $TPATH/dir2/file3
> +file3_stat_before_first_access=`_stat $TPATH/dir2/file3`
> +cat $TPATH/dir2/file3 > /dev/null
> +file3_stat_after_first_access=`_stat $TPATH/dir2/file3`
> +_compare_stat_times NNN "$file3_stat_before_first_access" \
> + "$file3_stat_after_first_access" "after accessing file3 first time"
> +
> +# Checking that the modify and change times are still updated
> +file1_stat_before_modify=`_stat $TPATH/dir1/file1`
> +echo "xyz" > $TPATH/dir1/file1
> +file1_stat_after_modify=`_stat $TPATH/dir1/file1`
> +_compare_stat_times NYY "$file1_stat_before_modify" \
> + "$file1_stat_after_modify" "after modifying file1"
> +mv $TPATH/dir1/file1 $TPATH/dir1/file1_renamed
> +file1_stat_after_change=`_stat $TPATH/dir1/file1_renamed`
> +_compare_stat_times NNY "$file1_stat_after_modify" \
> + "$file1_stat_after_change" "after changing file1"
> +
> +# Remounting with strictatime option and
> +# accessing a previously created file twice
> +_scratch_unmount
> +_scratch_mount "-o strictatime"
> +cat $TPATH/dir2/file3 > /dev/null
> +file3_stat_after_second_access=`_stat $TPATH/dir2/file3`
> +_compare_stat_times YNN "$file3_stat_after_first_access" \
> + "$file3_stat_after_second_access" "after accessing file3 second time"
> +cat $TPATH/dir2/file3 > /dev/null
> +file3_stat_after_third_access=`_stat $TPATH/dir2/file3`
> +_compare_stat_times YNN "$file3_stat_after_second_access" \
> + "$file3_stat_after_third_access" "after accessing file3 third time"
> +
> +# Btrfs only: Creating readonly snapshot. Access time should never
> +# be updated, even when the strictatime mount option is active
> +if [ "$FSTYP" = "btrfs" ]; then
> + SPATH=$SCRATCH_MNT/snap1
> + btrfs subvol snapshot -r $TPATH $SPATH >> $seqres.full
> + dir2_stat_readonly_before_access=`_stat $SPATH/dir2`
> + ls $SPATH/dir2 >> $seqres.full
> + cat $SPATH/dir2/file3 >> $seqres.full
> + dir2_stat_readonly_after_access=`_stat $SPATH/dir2`
> + _compare_stat_times NNN "$dir2_stat_readonly_before_access" \
> + "$dir2_stat_readonly_after_access" "for dir in readonly subvol"
> + file3_stat_readonly_after_access=`_stat $SPATH/dir2/file3`
> + _compare_stat_times NNN "$file3_stat_after_third_access" \
> + "$file3_stat_readonly_after_access" "for file in readonly subvol"
> +fi
> +
> +# Remounting read-only. Access time should never be updated, despite the
> +# strictatime mount option.
> +dir2_stat_before_ro_mount=`_stat $TPATH/dir2`
> +file3_stat_before_ro_mount=`_stat $TPATH/dir2/file3`
> +_scratch_unmount
> +_scratch_mount "-o ro,strictatime"
> +ls $TPATH/dir2 > /dev/null
> +cat $TPATH/dir2/file3 > /dev/null
> +dir2_stat_after_ro_mount=`_stat $TPATH/dir2`
> +_compare_stat_times NNN "$dir2_stat_before_ro_mount" \
> + "$dir2_stat_after_ro_mount" "for dir in read-only filesystem"
> +file3_stat_after_ro_mount=`_stat $TPATH/dir2/file3`
> +_compare_stat_times NNN "$file3_stat_before_ro_mount" \
> + "$file3_stat_after_ro_mount" "for file in read-only filesystem"
> +
> +# success, all done
> +_scratch_unmount
> +echo "Silence is golden"
> +status=0
> +exit
> diff --git a/tests/generic/323.out b/tests/generic/323.out
> new file mode 100644
> index 0000000..5dba9b5
> --- /dev/null
> +++ b/tests/generic/323.out
> @@ -0,0 +1,2 @@
> +QA output created by 323
> +Silence is golden
> diff --git a/tests/generic/group b/tests/generic/group
> index f492461..3a72ee4 100644
> --- a/tests/generic/group
> +++ b/tests/generic/group
> @@ -125,3 +125,4 @@
> 320 auto rw
> 321 auto quick metadata log
> 322 auto quick metadata log
> +323 atime auto quick
>
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] xfstests: test for atime-related mount options
2014-02-17 20:40 ` Eric Sandeen
@ 2014-02-18 1:05 ` Dave Chinner
-1 siblings, 0 replies; 6+ messages in thread
From: Dave Chinner @ 2014-02-18 1:05 UTC (permalink / raw)
To: Eric Sandeen; +Cc: Koen De Wit, xfs, linux-btrfs
On Mon, Feb 17, 2014 at 02:40:45PM -0600, Eric Sandeen wrote:
> On 2/17/14, 2:25 PM, Koen De Wit wrote:
> > Tests the noatime, relatime, strictatime and nodiratime mount options.
> >
> > There is an extra check for Btrfs to ensure that the access time is
> > never updated on read-only subvolumes. (Regression test for bug fixed
> > with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
>
> I think this looks ok. Only little nit is that _require_relatime
> now implicitly requires scratch, but *shrug* it was Dave's idea. ;)
There's a _require_scratch call in there, so it's all good. ;)
Thanks Koen!
> Thanks!
>
> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
And thanks for the reivew, Eric ;)
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] xfstests: test for atime-related mount options
@ 2014-02-18 1:05 ` Dave Chinner
0 siblings, 0 replies; 6+ messages in thread
From: Dave Chinner @ 2014-02-18 1:05 UTC (permalink / raw)
To: Eric Sandeen; +Cc: Koen De Wit, linux-btrfs, xfs
On Mon, Feb 17, 2014 at 02:40:45PM -0600, Eric Sandeen wrote:
> On 2/17/14, 2:25 PM, Koen De Wit wrote:
> > Tests the noatime, relatime, strictatime and nodiratime mount options.
> >
> > There is an extra check for Btrfs to ensure that the access time is
> > never updated on read-only subvolumes. (Regression test for bug fixed
> > with commit 93fd63c2f001ca6797c6b15b696a484b165b4800)
>
> I think this looks ok. Only little nit is that _require_relatime
> now implicitly requires scratch, but *shrug* it was Dave's idea. ;)
There's a _require_scratch call in there, so it's all good. ;)
Thanks Koen!
> Thanks!
>
> Reviewed-by: Eric Sandeen <sandeen@redhat.com>
And thanks for the reivew, Eric ;)
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
_______________________________________________
xfs mailing list
xfs@oss.sgi.com
http://oss.sgi.com/mailman/listinfo/xfs
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-02-18 1:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-17 20:25 [PATCH v2] xfstests: test for atime-related mount options Koen De Wit
2014-02-17 20:25 ` Koen De Wit
2014-02-17 20:40 ` Eric Sandeen
2014-02-17 20:40 ` Eric Sandeen
2014-02-18 1:05 ` Dave Chinner
2014-02-18 1:05 ` Dave Chinner
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.