From: Jay Fenlason <fenlason@redhat.com>
To: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: alsa-devel@alsa-project.org, tiwai@suse.de, perex@perex.cz,
ffado-devel@lists.sf.net, linux1394-devel@lists.sourceforge.net
Subject: Re: [RFC v3] [PATCH 00/52] Enhancement for support of firewire devices
Date: Mon, 24 Feb 2014 12:28:47 -0500 [thread overview]
Message-ID: <20140224172846.GA880@redhat.com> (raw)
In-Reply-To: <53080CB3.9000504@sakamocchi.jp>
On Sat, Feb 22, 2014 at 11:34:27AM +0900, Takashi Sakamoto wrote:
> Hi Jay,
>
> Thanks for your testing.
>
> But I cannot respond to your bugs without enough information.
>
> Please inform me what you tested. My RFC v3 patches or my repository
> in github? If my repository in github, please show me HEAD in your
> local repository.
The RFC v3 patches.
> Additionally, please send me:
>
> 1. PreSonus Inspire1394
> $ cat /proc/asound/cardX/#formation
[hack@precision ~]$ cat /proc/asound/card3/#formation
Output Stream from device:
Rate PCM MIDI
22050 0 0
24000 0 0
32000 0 0
44100 4 0
48000 4 0
88200 4 0
96000 4 0
176400 0 0
192000 0 0
Input Stream to device:
Rate PCM MIDI
22050 0 0
24000 0 0
32000 0 0
44100 2 0
48000 2 0
88200 2 0
96000 2 0
176400 0 0
192000 0 0
> $ cat /proc/asound/cardX/#clock
[hack@precision ~]$ cat /proc/asound/card3/#clock
Sampling rate: 44100
Clock Source: Internal (MSU-dest: 3)
> $ cat /proc/asound/cardX/#firmware
[hack@precision ~]$ cat /proc/asound/card3/#firmware
Manufacturer: bridgeCo
Protocol Ver: 1
Build Ver: 0
GUID: 0x000A9200E6120698
Model ID: 0x9C
Model Rev: 1
Firmware Date: 20050902
Firmware Time: 182323
Firmware ID: 0x10001
Firmware Ver: 16777215
Base Addr: 0x20080000
Max Size: 1572864
Loader Date: 20050902
Loader Time: 174321
> $ aplay --verbose -D plughw:X /usr/share/sounds/alsa/Noise.wav
[hack@precision ~]$ aplay --verbose -D plughw:3
/usr/share/sounds/alsa/Noise.wav
Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little
Endian, Rate 48000 Hz, Mono
Plug PCM: Route conversion PCM (sformat=S16_LE)
Transformation table:
0 <- 0
1 <- 0
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 24000
period_size : 6000
period_time : 125000
tstamp_mode : NONE
period_step : 1
avail_min : 6000
period_event : 0
start_threshold : 24000
stop_threshold : 24000
silence_threshold: 0
silence_size : 0
boundary : 6755399441055744000
Slave: Hardware PCM card 3 'Inspire1394' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : MMAP_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 24000
period_size : 6000
period_time : 125000
tstamp_mode : NONE
period_step : 1
avail_min : 6000
period_event : 0
start_threshold : 24000
stop_threshold : 24000
silence_threshold: 0
silence_size : 0
boundary : 6755399441055744000
appl_ptr : 0
hw_ptr : 0
> $ arecord --verbose -D plughw:X /tmp/test.wav
[hack@precision ~]$ arecord --verbose -D plughw:3 /tmp/test.wav
Recording WAVE '/tmp/test.wav' : Unsigned 8 bit, Rate 8000 Hz, Mono
Plug PCM: Rate conversion PCM (48000, sformat=U8)
Converter: linear-interpolation
Protocol version: 10002
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : U8
subformat : STD
channels : 1
rate : 8000
exact rate : 8000 (8000/1)
msbits : 8
buffer_size : 1365
period_size : 341
period_time : 42666
tstamp_mode : NONE
period_step : 1
avail_min : 341
period_event : 0
start_threshold : 1
stop_threshold : 1365
silence_threshold: 0
silence_size : 0
boundary : 768426686420090880
Slave: Route conversion PCM (sformat=S32_LE)
Transformation table:
0 <- 0*0.25 + 1*0.25 + 2*0.25 + 3*0.25
Its setup is:
stream : CAPTURE
access : MMAP_INTERLEAVED
format : U8
subformat : STD
channels : 1
rate : 48000
exact rate : 48000 (48000/1)
msbits : 8
buffer_size : 8192
period_size : 2048
period_time : 42666
tstamp_mode : NONE
period_step : 1
avail_min : 2048
period_event : 0
start_threshold : 6
stop_threshold : 8192
silence_threshold: 0
silence_size : 0
boundary : 4611686018427387904
Slave: Hardware PCM card 3 'Inspire1394' device 0 subdevice 0
Its setup is:
stream : CAPTURE
access : MMAP_INTERLEAVED
format : S32_LE
subformat : STD
channels : 4
rate : 48000
exact rate : 48000 (48000/1)
msbits : 24
buffer_size : 8192
period_size : 2048
period_time : 42666
tstamp_mode : NONE
period_step : 1
avail_min : 2048
period_event : 0
start_threshold : 6
stop_threshold : 8192
silence_threshold: 0
silence_size : 0
boundary : 4611686018427387904
appl_ptr : 0
hw_ptr : 0
^CAborted by signal Interrupt...
arecord: pcm_read:2031: read error: Interrupted system call
> ('X' should be for inspire1394.)
>
> 2. FireWave
> $ cat /proc/asound/cards
[hack@precision ~]$ cat /proc/asound/cards
0 [ICH5 ]: ICH4 - Intel ICH5
Intel ICH5 with AD1981B at irq 17
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xf0710000 irq 89
2 [Surrou ]: FireWave - Griffin FireWave Surrou
Griffin Technology Griffin FireWave Surrou
(OXFW970 0104), GUID 001292060052048
3 [Inspire1394 ]: BeBoB - Inspire1394
Presonus Inspire1394 (id:156, rev:1), GUID
000a9200e6120698 at fw2.0, S400
> $ cat /proc/asound/cardY/#formation
[hack@precision ~]$ cat /proc/asound/card2/#formation
Output Stream from device:
Rate PCM MIDI
32000 0 0
44100 0 0
48000 0 0
88200 0 0
96000 0 0
176400 0 0
192000 0 0
Input Stream to device:
Rate PCM MIDI
32000 6 0
44100 6 0
48000 2 0
88200 0 0
96000 2 0
176400 0 0
192000 0 0
> $ cat /proc/asound/cardY/#clock
[hack@precision ~]$ cat /proc/asound/card2/#clock
[hack@precision ~]$
> $ aplay --verbose -D plughw:Y /usr/share/sounds/alsa/Noise.wav
> ('Y' should be for FireWave.)
[hack@precision ~]$ aplay --verbose -D plughw:2
/usr/share/sounds/alsa/Noise.wav
Playing WAVE '/usr/share/sounds/alsa/Noise.wav' : Signed 16 bit Little
Endian, Rate 48000 Hz, Mono
aplay: set_params:1297: Unable to install hw params:
ACCESS: RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: 48000
PERIOD_TIME: 125000
PERIOD_SIZE: 6000
PERIOD_BYTES: 12000
PERIODS: 4
BUFFER_TIME: 500000
BUFFER_SIZE: 24000
BUFFER_BYTES: 48000
TICK_TIME: 0
> And I need dump of config_rom for FireWave.
> $ hexdump -C /sys/bus/firewire/devices/fwZ/config_rom
> ('Z' should be 1 or 2 for FireWave.)
I'm including the hexdump for the Inspire1394 here and a decoded
version of the FireWave's config rom (as reported by my fwhack tool)
[hack@precision ~]$ echo /dev/fw*
/dev/fw0 /dev/fw1 /dev/fw2 /dev/fw3
[hack@precision ~]$ hexdump -C /sys/bus/firewire/devices/fw3/config_rom
00000000 a8 06 27 04 34 39 33 31 03 50 ff 20 06 92 12 00 |..'.4931.P. ....|
00000010 81 04 52 00 9a 54 06 00 92 12 00 03 0a 00 00 81 |..R..T..........|
00000020 70 f9 00 17 10 00 00 81 c0 83 00 0c 01 00 00 d1 |p...............|
00000030 bd ba 04 00 2d a0 00 12 01 00 01 13 70 f9 00 17 |....-.......p...|
00000040 0e 00 00 81 1e 89 07 00 00 00 00 00 00 00 00 00 |................|
00000050 66 69 72 47 20 6e 69 66 68 63 65 54 6f 6c 6f 6e |firG nifhceTolon|
00000060 00 00 79 67 2b 0c 04 00 00 00 00 00 00 00 00 00 |..yg+...........|
00000070 65 72 69 46 65 76 61 57 1a 90 09 00 00 00 00 00 |eriFevaW........|
00000080 00 00 00 00 66 69 72 47 20 6e 69 66 65 72 69 46 |....firG niferiF|
00000090 65 76 61 57 72 75 53 20 6e 75 6f 72 00 00 00 64 |evaWruS nuor...d|
000000a0
[hack@precision ~]$ hexdump -C /sys/bus/firewire/devices/fw2/config_rom
00000000 28 ea 2b 04 34 39 33 31 22 61 64 f0 00 92 0a 00 |(.+.4931"ad.....|
00000010 98 06 12 e6 75 f1 09 00 9c 00 00 04 c0 83 00 0c |....u...........|
00000020 92 0a 00 03 12 00 00 81 01 00 01 17 15 00 00 81 |................|
00000030 ff ff ff 13 02 00 00 d1 06 00 00 d4 c9 af 04 00 |................|
00000040 2d a0 00 12 01 00 01 13 01 00 01 17 13 00 00 81 |-...............|
00000050 c7 37 06 00 f5 07 00 12 01 00 00 13 c7 ff ff 3a |.7.............:|
00000060 00 00 10 3b c7 ff ff 3c 00 00 60 3d a5 74 04 00 |...;...<..`=.t..|
00000070 00 00 00 00 00 00 00 00 73 65 72 50 73 75 6e 6f |........serPsuno|
00000080 18 12 05 00 00 00 00 00 00 00 00 00 70 73 6e 49 |............psnI|
00000090 31 65 72 69 00 34 39 33 18 12 05 00 00 00 00 00 |1eri.493........|
000000a0 00 00 00 00 70 73 6e 49 31 65 72 69 00 34 39 33 |....psnI1eri.493|
000000b0
[hack@precision ~]$ fwhack /dev/fw3
i
info: version = 5, rom_length = 160, bus_reset_closure = 1, card = 1
rom (40 quadlets):
042706a8 31333934 20ff5003 00129206
00520481 0006549a 03001292 8100000a
1700f970 81000010 0c0083c0 d1000001
0004babd 1200a02d 13010001 1700f970
8100000e 0007891e 00000000 00000000
47726966 66696e20 54656368 6e6f6c6f
67790000 00040c2b 00000000 00000000
46697265 57617665 0009901a 00000000
00000000 47726966 66696e20 46697265
57617665 20537572 726f756e 64000000
Info length: 4
CRC length: 27
CRC: 6a8
Bus Info Block: ISC res1=0, cyc_clk_acc=ff, max_rec=64, res2=3, max_rom=Quadlet, generation=0, res3=0, link_spd=3, node_vendor_id=001292, node_chip_id=0600520481
6 elements CRC 549a
Immediate Vendor 1292
Leaf Descriptor a
key type 2
7 elements CRC 891e
Text 0 Griffin Technology
Immediate Model f970
Leaf Descriptor 10
key type 2
4 elements CRC c2b
Text 0 FireWave
Immediate Node Capabilities 83c0
Directory Unit 1
key type 3
4 elements CRC babd
Immediate Specifier ID a02d
Immediate Version 10001
Immediate Model f970
Leaf Descriptor e
key type 2
9 elements CRC 901a
Text 0 Griffin FireWave Surround
bus reset: closure = 1, type = 0, node_id = ffc1, local_node_id = ffc2, bm_node_id = ffc2, irm_node_id = ffc2, root_node_id = ffc2, generation = 4
Let me know if there is any other information you need.
-- JF
------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
next prev parent reply other threads:[~2014-02-24 17:28 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-29 13:44 [RFC v3] [PATCH 00/52] Enhancement for support of firewire devices Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 01/52] firewire-lib: Rename functions, structure, member for AMDTP Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 02/52] firewire-lib: Add macros instead of fixed value " Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 03/52] firewire-lib: Add 'direction' member to 'amdtp_stream' structure Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 04/52] firewire-lib: Split some codes into functions to reuse for both streams Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 05/52] firewire-lib: Add support for AMDTP in-stream and PCM capture Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 06/52] firewire-lib: Add support for MIDI capture/playback Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 07/52] firewire-lib: Give syt value as parameter to handle_out_packet() Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 08/52] firewire-lib: Add support for duplex streams synchronization in blocking mode Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 09/52] firewire-lib: Add sort function for transmitted packet Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 10/52] firewire-lib: Add transfer delay to synchronized duplex streams Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 11/52] firewire-lib: Add support for channel mapping Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 12/52] firewire-lib: Rename macros, variables and functions for CMP Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 13/52] firewire-lib: Add 'direction' member to 'cmp_connection' structure Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 14/52] firewire-lib: Add handling output connection by CMP Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 15/52] firewire-lib: Add a new function to check others' connection Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 16/52] firewire-lib: Add some AV/C general commands Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 17/52] firewire-lib: Add quirks for Fireworks Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 18/52] fireworks: Add skelton for Fireworks based devices Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 19/52] fireworks: Add transaction and some commands Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 20/52] fireworks: Add connection and stream management Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 21/52] fireworks: Add proc interface for debugging purpose Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 22/52] fireworks: Add MIDI interface Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 23/52] fireworks: Add PCM interface Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 24/52] fireworks: Add hwdep interface Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 25/52] fireworks: Add command/response functionality into " Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 26/52] bebob: Add skelton for BeBoB based devices Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 27/52] bebob: Add commands and connections/streams management Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 28/52] bebob: Add proc interface for debugging purpose Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 29/52] bebob: Add MIDI interface Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 30/52] bebob: Add PCM interface Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 31/52] bebob: Add hwdep interface Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 32/52] bebob: Prepare for device specific operations Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 33/52] bebob: Add support for Terratec PHASE, EWS series and Aureon Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 34/52] bebob: Add support for Yamaha GO series Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 35/52] bebob: Add support for Focusrite Saffire/SaffirePro series Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 36/52] bebob: Add support for M-Audio usual Firewire series Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 37/52] bebob: Send a cue to load firmware for M-Audio " Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 38/52] speakers: Rename to oxfw Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 39/52] oxfw: Move to its own directory Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 40/52] oxfw: Split stream functionality to a new file and add a header file Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 41/52] oxfw: Split PCM functionality to a new file Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 42/52] oxfw: Split control " Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 43/52] oxfw: Change the way to name card Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 44/52] oxfw: Change the way to make PCM rules/constraints Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 45/52] oxfw: Add proc interface for debugging purpose Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 46/52] oxfw: Change the way to start stream Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 47/52] oxfw: Add some AV/C commands to get stream formation and supported sample rate Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 48/52] oxfw: Add support for Behringer/Mackie devices Takashi Sakamoto
2014-01-29 13:44 ` [PATCH 49/52] oxfw: Add support AMDTP in-stream and PCM capture Takashi Sakamoto
2014-01-29 14:49 ` [PATCH 50/52] oxfw: Add support for capture/playback MIDI messages Takashi Sakamoto
2014-01-29 14:49 ` [PATCH 51/52] oxfw: Add hwdep interface Takashi Sakamoto
2014-01-29 14:49 ` [PATCH 52/52] bebob: Add support for M-Audio special Firewire series Takashi Sakamoto
2014-02-25 14:02 ` Takashi Sakamoto
2014-02-25 20:04 ` Clemens Ladisch
2014-02-25 20:12 ` [FFADO-devel] [alsa-devel] " Малышев Михаил
2014-02-26 9:53 ` Takashi Sakamoto
2014-01-30 0:16 ` About impacts to user-land Takashi Sakamoto
2014-02-21 16:54 ` [FFADO-devel] [RFC v3] [PATCH 00/52] Enhancement for support of firewire devices Jay Fenlason
2014-02-21 20:28 ` Stefan Richter
2014-02-21 20:39 ` Stefan Richter
2014-02-22 2:34 ` Takashi Sakamoto
2014-02-24 17:28 ` Jay Fenlason [this message]
2014-02-25 3:41 ` Takashi Sakamoto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140224172846.GA880@redhat.com \
--to=fenlason@redhat.com \
--cc=alsa-devel@alsa-project.org \
--cc=ffado-devel@lists.sf.net \
--cc=linux1394-devel@lists.sourceforge.net \
--cc=o-takashi@sakamocchi.jp \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.