All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: Huacai Chen <chenhc@lemote.com>
Cc: Ralf Baechle <ralf@linux-mips.org>,
	John Crispin <john@phrozen.org>,
	"Steven J. Hill" <Steven.Hill@imgtec.com>,
	Aurelien Jarno <aurelien@aurel32.net>,
	linux-mips@linux-mips.org, Fuxin Zhang <zhangfx@lemote.com>,
	Zhangjin Wu <wuzhangjin@gmail.com>,
	Hongliang Tao <taohl@lemote.com>, Hua Yan <yanh@lemote.com>
Subject: Re: [PATCH V20 04/12] MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support
Date: Sat, 22 Mar 2014 22:11:09 +0400	[thread overview]
Message-ID: <20140322221109.aeea1ccec916498da6a5ce2d@gmail.com> (raw)
In-Reply-To: <1395398650-19292-5-git-send-email-chenhc@lemote.com>

On Fri, 21 Mar 2014 18:44:02 +0800
Huacai Chen <chenhc@lemote.com> wrote:

> The new UEFI-like firmware interface (LEFI, i.e. Loongson Unified
> Firmware Interface) has 3 advantages:
> 
> 1, Firmware export a physical memory map which is similar to X86's
>    E820 map, so prom_init_memory() will be more elegant that #ifdef
>    clauses can be removed.
> 2, Firmware export a pci irq routing table, we no longer need pci
>    irq routing fixup in kernel's code.
> 3, Firmware has a built-in vga bios, and its address is exported,
>    the linux kernel no longer need an embedded blob.
> 
> With the LEFI interface, Loongson-3A/2G and all their successors can use
> a unified kernel. All Loongson-based machines support this new interface
> except 2E/2F series.

Do you really need to reinvent the wheel?

Why you can't just use existing Open Firmware Device Tree?


> Signed-off-by: Huacai Chen <chenhc@lemote.com>
> Signed-off-by: Hongliang Tao <taohl@lemote.com>
> Signed-off-by: Hua Yan <yanh@lemote.com>
> Tested-by: Alex Smith <alex.smith@imgtec.com>
> Reviewed-by: Alex Smith <alex.smith@imgtec.com>
> ---
>  arch/mips/include/asm/mach-loongson/boot_param.h |  163 ++++++++++++++++++++++
>  arch/mips/include/asm/mach-loongson/loongson.h   |    4 +-
>  arch/mips/loongson/common/env.c                  |   67 +++++++--
>  arch/mips/loongson/common/init.c                 |    9 +-
>  arch/mips/loongson/common/mem.c                  |   42 ++++++
>  arch/mips/loongson/common/pci.c                  |    6 +-
>  arch/mips/loongson/common/reset.c                |   21 +++
>  7 files changed, 292 insertions(+), 20 deletions(-)
>  create mode 100644 arch/mips/include/asm/mach-loongson/boot_param.h
> 
> diff --git a/arch/mips/include/asm/mach-loongson/boot_param.h b/arch/mips/include/asm/mach-loongson/boot_param.h
> new file mode 100644
> index 0000000..829a7ec
> --- /dev/null
> +++ b/arch/mips/include/asm/mach-loongson/boot_param.h
> @@ -0,0 +1,163 @@
> +#ifndef __ASM_MACH_LOONGSON_BOOT_PARAM_H_
> +#define __ASM_MACH_LOONGSON_BOOT_PARAM_H_
> +
> +#define SYSTEM_RAM_LOW		1
> +#define SYSTEM_RAM_HIGH		2
> +#define MEM_RESERVED		3
> +#define PCI_IO			4
> +#define PCI_MEM			5
> +#define LOONGSON_CFG_REG	6
> +#define VIDEO_ROM		7
> +#define ADAPTER_ROM		8
> +#define ACPI_TABLE		9
> +#define MAX_MEMORY_TYPE		10
> +
> +#define LOONGSON3_BOOT_MEM_MAP_MAX 128
> +struct efi_memory_map_loongson {
> +	u16 vers;	/* version of efi_memory_map */
> +	u32 nr_map;	/* number of memory_maps */
> +	u32 mem_freq;	/* memory frequence */
> +	struct mem_map {
> +		u32 node_id;	/* node_id which memory attached to */
> +		u32 mem_type;	/* system memory, pci memory, pci io, etc. */
> +		u64 mem_start;	/* memory map start address */
> +		u32 mem_size;	/* each memory_map size, not the total size */
> +	} map[LOONGSON3_BOOT_MEM_MAP_MAX];
> +} __packed;
> +
> +enum loongson_cpu_type {
> +	Loongson_2E = 0,
> +	Loongson_2F = 1,
> +	Loongson_3A = 2,
> +	Loongson_3B = 3,
> +	Loongson_1A = 4,
> +	Loongson_1B = 5
> +};
> +
> +/*
> + * Capability and feature descriptor structure for MIPS CPU
> + */
> +struct efi_cpuinfo_loongson {
> +	u16 vers;     /* version of efi_cpuinfo_loongson */
> +	u32 processor_id; /* PRID, e.g. 6305, 6306 */
> +	u32 cputype;  /* Loongson_3A/3B, etc. */
> +	u32 total_node;   /* num of total numa nodes */
> +	u32 cpu_startup_core_id; /* Core id */
> +	u32 cpu_clock_freq; /* cpu_clock */
> +	u32 nr_cpus;
> +} __packed;
> +
> +struct system_loongson {
> +	u16 vers;     /* version of system_loongson */
> +	u32 ccnuma_smp; /* 0: no numa; 1: has numa */
> +	u32 sing_double_channel; /* 1:single; 2:double */
> +} __packed;
> +
> +struct irq_source_routing_table {
> +	u16 vers;
> +	u16 size;
> +	u16 rtr_bus;
> +	u16 rtr_devfn;
> +	u32 vendor;
> +	u32 device;
> +	u32 PIC_type;   /* conform use HT or PCI to route to CPU-PIC */
> +	u64 ht_int_bit; /* 3A: 1<<24; 3B: 1<<16 */
> +	u64 ht_enable;  /* irqs used in this PIC */
> +	u32 node_id;    /* node id: 0x0-0; 0x1-1; 0x10-2; 0x11-3 */
> +	u64 pci_mem_start_addr;
> +	u64 pci_mem_end_addr;
> +	u64 pci_io_start_addr;
> +	u64 pci_io_end_addr;
> +	u64 pci_config_addr;
> +	u32 dma_mask_bits;
> +} __packed;
> +
> +struct interface_info {
> +	u16 vers; /* version of the specificition */
> +	u16 size;
> +	u8  flag;
> +	char description[64];
> +} __packed;
> +
> +#define MAX_RESOURCE_NUMBER 128
> +struct resource_loongson {
> +	u64 start; /* resource start address */
> +	u64 end;   /* resource end address */
> +	char name[64];
> +	u32 flags;
> +};
> +
> +struct archdev_data {};  /* arch specific additions */
> +
> +struct board_devices {
> +	char name[64];    /* hold the device name */
> +	u32 num_resources; /* number of device_resource */
> +	/* for each device's resource */
> +	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
> +	/* arch specific additions */
> +	struct archdev_data archdata;
> +};
> +
> +struct loongson_special_attribute {
> +	u16 vers;     /* version of this special */
> +	char special_name[64]; /* special_atribute_name */
> +	u32 loongson_special_type; /* type of special device */
> +	/* for each device's resource */
> +	struct resource_loongson resource[MAX_RESOURCE_NUMBER];
> +};
> +
> +struct loongson_params {
> +	u64 memory_offset;	/* efi_memory_map_loongson struct offset */
> +	u64 cpu_offset;		/* efi_cpuinfo_loongson struct offset */
> +	u64 system_offset;	/* system_loongson struct offset */
> +	u64 irq_offset;		/* irq_source_routing_table struct offset */
> +	u64 interface_offset;	/* interface_info struct offset */
> +	u64 special_offset;	/* loongson_special_attribute struct offset */
> +	u64 boarddev_table_offset;  /* board_devices offset */
> +};
> +
> +struct smbios_tables {
> +	u16 vers;     /* version of smbios */
> +	u64 vga_bios; /* vga_bios address */
> +	struct loongson_params lp;
> +};
> +
> +struct efi_reset_system_t {
> +	u64 ResetCold;
> +	u64 ResetWarm;
> +	u64 ResetType;
> +	u64 Shutdown;
> +	u64 DoSuspend; /* NULL if not support */
> +};
> +
> +struct efi_loongson {
> +	u64 mps;	/* MPS table */
> +	u64 acpi;	/* ACPI table (IA64 ext 0.71) */
> +	u64 acpi20;	/* ACPI table (ACPI 2.0) */
> +	struct smbios_tables smbios;	/* SM BIOS table */
> +	u64 sal_systab;	/* SAL system table */
> +	u64 boot_info;	/* boot info table */
> +};
> +
> +struct boot_params {
> +	struct efi_loongson efi;
> +	struct efi_reset_system_t reset_system;
> +};
> +
> +struct loongson_system_configuration {
> +	u32 nr_cpus;
> +	enum loongson_cpu_type cputype;
> +	u64 ht_control_base;
> +	u64 pci_mem_start_addr;
> +	u64 pci_mem_end_addr;
> +	u64 pci_io_base;
> +	u64 restart_addr;
> +	u64 poweroff_addr;
> +	u64 suspend_addr;
> +	u64 vgabios_addr;
> +	u32 dma_mask_bits;
> +};
> +
> +extern struct efi_memory_map_loongson *loongson_memmap;
> +extern struct loongson_system_configuration loongson_sysconf;
> +#endif
> diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h
> index b286534..5913ea0 100644
> --- a/arch/mips/include/asm/mach-loongson/loongson.h
> +++ b/arch/mips/include/asm/mach-loongson/loongson.h
> @@ -24,8 +24,8 @@ extern void mach_prepare_reboot(void);
>  extern void mach_prepare_shutdown(void);
>  
>  /* environment arguments from bootloader */
> -extern unsigned long cpu_clock_freq;
> -extern unsigned long memsize, highmemsize;
> +extern u32 cpu_clock_freq;
> +extern u32 memsize, highmemsize;
>  
>  /* loongson-specific command line, env and memory initialization */
>  extern void __init prom_init_memory(void);
> diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
> index 0a18fcf..0c543ea 100644
> --- a/arch/mips/loongson/common/env.c
> +++ b/arch/mips/loongson/common/env.c
> @@ -18,29 +18,30 @@
>   * option) any later version.
>   */
>  #include <linux/module.h>
> -
>  #include <asm/bootinfo.h>
> -
>  #include <loongson.h>
> +#include <boot_param.h>
>  
> -unsigned long cpu_clock_freq;
> +u32 cpu_clock_freq;
>  EXPORT_SYMBOL(cpu_clock_freq);
> -unsigned long memsize, highmemsize;
> +struct efi_memory_map_loongson *loongson_memmap;
> +struct loongson_system_configuration loongson_sysconf;
>  
>  #define parse_even_earlier(res, option, p)				\
>  do {									\
>  	unsigned int tmp __maybe_unused;				\
>  									\
>  	if (strncmp(option, (char *)p, strlen(option)) == 0)		\
> -		tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \
> +		tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \
>  } while (0)
>  
>  void __init prom_init_env(void)
>  {
>  	/* pmon passes arguments in 32bit pointers */
> -	int *_prom_envp;
> -	unsigned long bus_clock;
>  	unsigned int processor_id;
> +
> +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
> +	int *_prom_envp;
>  	long l;
>  
>  	/* firmware arguments are initialized in head.S */
> @@ -48,7 +49,6 @@ void __init prom_init_env(void)
>  
>  	l = (long)*_prom_envp;
>  	while (l != 0) {
> -		parse_even_earlier(bus_clock, "busclock", l);
>  		parse_even_earlier(cpu_clock_freq, "cpuclock", l);
>  		parse_even_earlier(memsize, "memsize", l);
>  		parse_even_earlier(highmemsize, "highmemsize", l);
> @@ -57,8 +57,48 @@ void __init prom_init_env(void)
>  	}
>  	if (memsize == 0)
>  		memsize = 256;
> -	if (bus_clock == 0)
> -		bus_clock = 66000000;
> +	pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
> +#else
> +	struct boot_params *boot_p;
> +	struct loongson_params *loongson_p;
> +	struct efi_cpuinfo_loongson *ecpu;
> +	struct irq_source_routing_table *eirq_source;
> +
> +	/* firmware arguments are initialized in head.S */
> +	boot_p = (struct boot_params *)fw_arg2;
> +	loongson_p = &(boot_p->efi.smbios.lp);
> +
> +	ecpu = (struct efi_cpuinfo_loongson *)
> +		((u64)loongson_p + loongson_p->cpu_offset);
> +	eirq_source = (struct irq_source_routing_table *)
> +		((u64)loongson_p + loongson_p->irq_offset);
> +	loongson_memmap = (struct efi_memory_map_loongson *)
> +		((u64)loongson_p + loongson_p->memory_offset);
> +
> +	cpu_clock_freq = ecpu->cpu_clock_freq;
> +	loongson_sysconf.cputype = ecpu->cputype;
> +	loongson_sysconf.nr_cpus = ecpu->nr_cpus;
> +	if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
> +		loongson_sysconf.nr_cpus = NR_CPUS;
> +
> +	loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
> +	loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
> +	loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
> +	loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
> +	if (loongson_sysconf.dma_mask_bits < 32 ||
> +		loongson_sysconf.dma_mask_bits > 64)
> +		loongson_sysconf.dma_mask_bits = 32;
> +
> +	loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
> +	loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
> +	loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
> +
> +	loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
> +	loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
> +	pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
> +		loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
> +		loongson_sysconf.vgabios_addr);
> +#endif
>  	if (cpu_clock_freq == 0) {
>  		processor_id = (&current_cpu_data)->processor_id;
>  		switch (processor_id & PRID_REV_MASK) {
> @@ -68,12 +108,13 @@ void __init prom_init_env(void)
>  		case PRID_REV_LOONGSON2F:
>  			cpu_clock_freq = 797000000;
>  			break;
> +		case PRID_REV_LOONGSON3A:
> +			cpu_clock_freq = 900000000;
> +			break;
>  		default:
>  			cpu_clock_freq = 100000000;
>  			break;
>  		}
>  	}
> -
> -	pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
> -		bus_clock, cpu_clock_freq, memsize, highmemsize);
> +	pr_info("CpuClock = %u\n", cpu_clock_freq);
>  }
> diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
> index ae7af1f..81ba3b4 100644
> --- a/arch/mips/loongson/common/init.c
> +++ b/arch/mips/loongson/common/init.c
> @@ -17,10 +17,6 @@ unsigned long __maybe_unused _loongson_addrwincfg_base;
>  
>  void __init prom_init(void)
>  {
> -	/* init base address of io space */
> -	set_io_port_base((unsigned long)
> -		ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
> -
>  #ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
>  	_loongson_addrwincfg_base = (unsigned long)
>  		ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
> @@ -28,6 +24,11 @@ void __init prom_init(void)
>  
>  	prom_init_cmdline();
>  	prom_init_env();
> +
> +	/* init base address of io space */
> +	set_io_port_base((unsigned long)
> +		ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
> +
>  	prom_init_memory();
>  
>  	/*init the uart base address */
> diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
> index 8626a42..b01d524 100644
> --- a/arch/mips/loongson/common/mem.c
> +++ b/arch/mips/loongson/common/mem.c
> @@ -11,9 +11,14 @@
>  #include <asm/bootinfo.h>
>  
>  #include <loongson.h>
> +#include <boot_param.h>
>  #include <mem.h>
>  #include <pci.h>
>  
> +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
> +
> +u32 memsize, highmemsize;
> +
>  void __init prom_init_memory(void)
>  {
>  	add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
> @@ -49,6 +54,43 @@ void __init prom_init_memory(void)
>  #endif /* !CONFIG_64BIT */
>  }
>  
> +#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */
> +
> +void __init prom_init_memory(void)
> +{
> +	int i;
> +	u32 node_id;
> +	u32 mem_type;
> +
> +	/* parse memory information */
> +	for (i = 0; i < loongson_memmap->nr_map; i++) {
> +		node_id = loongson_memmap->map[i].node_id;
> +		mem_type = loongson_memmap->map[i].mem_type;
> +
> +		if (node_id == 0) {
> +			switch (mem_type) {
> +			case SYSTEM_RAM_LOW:
> +				add_memory_region(loongson_memmap->map[i].mem_start,
> +					(u64)loongson_memmap->map[i].mem_size << 20,
> +					BOOT_MEM_RAM);
> +				break;
> +			case SYSTEM_RAM_HIGH:
> +				add_memory_region(loongson_memmap->map[i].mem_start,
> +					(u64)loongson_memmap->map[i].mem_size << 20,
> +					BOOT_MEM_RAM);
> +				break;
> +			case MEM_RESERVED:
> +				add_memory_region(loongson_memmap->map[i].mem_start,
> +					(u64)loongson_memmap->map[i].mem_size << 20,
> +					BOOT_MEM_RESERVED);
> +				break;
> +			}
> +		}
> +	}
> +}
> +
> +#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */
> +
>  /* override of arch/mips/mm/cache.c: __uncached_access */
>  int __uncached_access(struct file *file, unsigned long addr)
>  {
> diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
> index fa77844..003ab4e 100644
> --- a/arch/mips/loongson/common/pci.c
> +++ b/arch/mips/loongson/common/pci.c
> @@ -11,6 +11,7 @@
>  
>  #include <pci.h>
>  #include <loongson.h>
> +#include <boot_param.h>
>  
>  static struct resource loongson_pci_mem_resource = {
>  	.name	= "pci memory space",
> @@ -82,7 +83,10 @@ static int __init pcibios_init(void)
>  	setup_pcimap();
>  
>  	loongson_pci_controller.io_map_base = mips_io_port_base;
> -
> +#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE
> +	loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
> +	loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
> +#endif
>  	register_pci_controller(&loongson_pci_controller);
>  
>  	return 0;
> diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
> index 65bfbb5..a60715e 100644
> --- a/arch/mips/loongson/common/reset.c
> +++ b/arch/mips/loongson/common/reset.c
> @@ -16,6 +16,7 @@
>  #include <asm/reboot.h>
>  
>  #include <loongson.h>
> +#include <boot_param.h>
>  
>  static inline void loongson_reboot(void)
>  {
> @@ -37,17 +38,37 @@ static inline void loongson_reboot(void)
>  
>  static void loongson_restart(char *command)
>  {
> +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
>  	/* do preparation for reboot */
>  	mach_prepare_reboot();
>  
>  	/* reboot via jumping to boot base address */
>  	loongson_reboot();
> +#else
> +	void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
> +
> +	fw_restart();
> +	while (1) {
> +		if (cpu_wait)
> +			cpu_wait();
> +	}
> +#endif
>  }
>  
>  static void loongson_poweroff(void)
>  {
> +#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
>  	mach_prepare_shutdown();
>  	unreachable();
> +#else
> +	void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
> +
> +	fw_poweroff();
> +	while (1) {
> +		if (cpu_wait)
> +			cpu_wait();
> +	}
> +#endif
>  }
>  
>  static void loongson_halt(void)
> -- 
> 1.7.7.3
> 
> 


-- 
-- 
Best regards,
  Antony Pavlov

  reply	other threads:[~2014-03-22 18:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-21 10:43 [PATCH V20 00/12] MIPS: Add Loongson-3 based machines support Huacai Chen
2014-03-21 10:43 ` [PATCH V20 01/12] MIPS: Loongson: Add basic Loongson-3 definition Huacai Chen
2014-06-09  8:10   ` Yunqiang Su
2014-03-21 10:44 ` [PATCH V20 02/12] MIPS: Loongson: Add basic Loongson-3 CPU support Huacai Chen
2014-03-21 10:44 ` [PATCH V20 03/12] MIPS: Loongson 3: Add Lemote-3A machtypes definition Huacai Chen
2014-03-21 10:44 ` [PATCH V20 04/12] MIPS: Loongson: Add UEFI-like firmware interface (LEFI) support Huacai Chen
2014-03-22 18:11   ` Antony Pavlov [this message]
2014-03-23  1:30     ` "陈华才"
2014-03-21 10:44 ` [PATCH V20 05/12] MIPS: Loongson 3: Add HT-linked PCI support Huacai Chen
2014-03-21 10:44 ` [PATCH V20 06/12] MIPS: Loongson 3: Add IRQ init and dispatch support Huacai Chen
2014-03-21 10:44 ` [PATCH V20 07/12] MIPS: Loongson 3: Add serial port support Huacai Chen
2014-03-21 10:44 ` [PATCH V20 08/12] MIPS: Loongson: Add swiotlb to support All-Memory DMA Huacai Chen
2014-03-21 10:44 ` [PATCH V20 09/12] MIPS: Loongson: Add Loongson-3 Kconfig options Huacai Chen
2014-03-21 10:44 ` [PATCH V20 10/12] MIPS: Loongson 3: Add Loongson-3 SMP support Huacai Chen
2014-03-21 10:44 ` [PATCH V20 11/12] MIPS: Loongson 3: Add CPU hotplug support Huacai Chen
2014-03-21 10:44 ` [PATCH V20 12/12] MIPS: Loongson: Add a Loongson-3 default config file Huacai Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140322221109.aeea1ccec916498da6a5ce2d@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=Steven.Hill@imgtec.com \
    --cc=aurelien@aurel32.net \
    --cc=chenhc@lemote.com \
    --cc=john@phrozen.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    --cc=taohl@lemote.com \
    --cc=wuzhangjin@gmail.com \
    --cc=yanh@lemote.com \
    --cc=zhangfx@lemote.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.