From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752907AbaCXMBx (ORCPT ); Mon, 24 Mar 2014 08:01:53 -0400 Received: from mail.karo-electronics.de ([81.173.242.67]:53175 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750924AbaCXMBu convert rfc822-to-8bit (ORCPT ); Mon, 24 Mar 2014 08:01:50 -0400 Date: Mon, 24 Mar 2014 13:01:29 +0100 From: Lothar =?UTF-8?B?V2HDn21hbm4=?= To: Shawn Guo Cc: Mark Rutland , devicetree@vger.kernel.org, Russell King , Pawel Moll , Ian Campbell , linux-kernel@vger.kernel.org, Rob Herring , Sascha Hauer , Kumar Gala , linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH] ARM: dts: imx6: add support for Ka-Ro TX6 modules Message-ID: <20140324130129.1c2ec444@ipc1.ka-ro> In-Reply-To: <20140322082352.GF5938@dragon> References: <1395235784-14034-1-git-send-email-LW@KARO-electronics.de> <20140322082352.GF5938@dragon> Organization: Ka-Ro electronics GmbH X-Mailer: Claws Mail 3.8.1 (GTK+ 2.24.10; x86_64-pc-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Shawn, it would help readability a lot if you would trim down the quoted parts of the original mail (like I did with [...] in this reply). Shawn Guo wrote: > On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Waßmann wrote: > > This patch adds support for the Ka-Ro electronics GmbH TX6 modules. > > There are five distinct module types with either i.MX6Q or i.MX6DL and > > LVDS or LCD display interface and one DTS file for a complete system > > with an i.MX6DL based TX6 module and a baseboard mounted on the back > > of a display (imx6dl-tx6dl-comtft.dts). > > > > Signed-off-by: Lothar Waßmann > > --- > > arch/arm/boot/dts/Makefile | 6 + > > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++ > > arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 188 ++++++++ > > arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 166 +++++++ > > arch/arm/boot/dts/imx6q-tx6q-1010.dts | 192 +++++++++ > > arch/arm/boot/dts/imx6q-tx6q-1020.dts | 192 +++++++++ > > arch/arm/boot/dts/imx6q-tx6q-1110.dts | 174 ++++++++ > > arch/arm/boot/dts/imx6qdl-tx6.dtsi | 672 +++++++++++++++++++++++++++++ > > 8 files changed, 1704 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts > > create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi > > [...] > > diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > new file mode 100644 > > index 0000000..6df5a25 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > @@ -0,0 +1,114 @@ > > +/* > > + * Copyright 2014 Lothar Waßmann > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +#include "imx6dl.dtsi" > > +#include "imx6qdl-tx6.dtsi" > > + > > +/ { > > + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; > > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > > Shouldn't it be "karo,imx6dl-tx6dl" instead? > Of course. :( > > + > > + aliases { > > + display = &display; > > + }; > > + > > + backlight: backlight { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm2 0 500000 0>; > > + power-supply = <®_3v3>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + display: display@di0 { > > + compatible = "fsl,imx-parallel-display"; > > + interface-pix-fmt = "rgb24"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_disp0_1>; > > + status = "okay"; > > + > > + port { > > + display0_in: endpoint { > > + remote-endpoint = <&ipu1_di0_disp0>; > > + }; > > + }; > > I do not have OF graph stuff in my tree yet. > You can apply the patch, once it arrives in your tree. [...] > > diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > new file mode 100644 > > index 0000000..c97fb42 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > @@ -0,0 +1,166 @@ > > +/* > > + * Copyright 2014 Lothar Waßmann > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +#include "imx6dl.dtsi" > > +#include "imx6qdl-tx6.dtsi" > > + > > +/ { > > + model = "Ka-Ro electronics TX6U-811x Module"; > > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > > + > > + aliases { > > + display = &lvds0; > > + lvds0 = &lvds0; > > + lvds1 = &lvds1; > > + }; > > + > > + backlight0: backlight0 { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm2 0 500000 0>; > > + power-supply = <®_lcd0_pwr>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + backlight1: backlight1 { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm1 0 500000 0>; > > + power-supply = <®_lcd1_pwr>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + panel0 { > > The convention of device tree node is node-name@unit-address, so in this > case it should probably be panel@0. > AFAIK that's only true for nodes that require a 'reg' property. Thus if it were: panels { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; panel@0 { compatible = "simple-panel"; reg = <0>; power-supply = <®_3v3>; backlight = <&backlight0>; }; [...] > > diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > > new file mode 100644 > > index 0000000..828e7f3 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > > @@ -0,0 +1,672 @@ > > +/* > > + * Copyright 2014 Lothar Waßmann > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include > > +#include > > +#include > > + > > +/ { > > + aliases { > > + can0 = &can2; > > + can1 = &can1; > > + ethernet0 = &fec; > > + lcdif_23bit_pins_a = &pinctrl_disp0_1; > > + lcdif_24bit_pins_a = &pinctrl_disp0_2; > > + pwm0 = &pwm1; > > + pwm1 = &pwm2; > > + reg_can_xcvr = ®_can_xcvr; > > + stk5led = &user_led; > > + usbotg = &usbotg; > > + sdhc0 = &usdhc1; > > + sdhc1 = &usdhc2; > > + }; > > + > > + memory { > > + reg = <0 0>; /* will be filled by U-Boot */ > > + }; > > + > > + clocks { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + mclk: codec_clock { > > clock@0 > OK. > > +&can1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_flexcan1>; > > + xceiver-supply = <®_can_xcvr>; > > + > > Drop the new line. > OK. [...] > > +&i2c3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3>; > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + sgtl5000: sgtl5000@0a { > > + compatible = "fsl,sgtl5000"; > > + reg = <0x0a>; > > + VDDA-supply = <®_2v5>; > > + VDDIO-supply = <®_3v3>; > > + clocks = <&mclk>; > > + }; > > + > > + polytouch: edt-ft5x06@38 { > > + compatible = "edt,edt-ft5x06"; > > + reg = <0x38>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_edt_ft5x06>; > > + interrupt-parent = <&gpio6>; > > + interrupts = <15 0>; > > + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; > > Where are all these bindings documented? > That's one in a separate patch adding DT support to the edt_ft5x06 driver. > > + linux,wakeup; > > + }; > > + > > + touchscreen: tsc2007@48 { > > + compatible = "ti,tsc2007"; > > + reg = <0x48>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_tsc2007>; > > + interrupt-parent = <&gpio3>; > > + interrupts = <26 0>; > > + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; > > + ti,x-plate-ohms = <660>; > > + linux,wakeup; > > + }; > > +}; > > + > > +&iomuxc { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_hog>; > > + > > + imx6qdl-tx6 { > > + pinctrl_hog: hoggrp { > > + fsl,pins = < > > + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ > > + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ > > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT > > Broken comment? > Yeah, right. Bad, that the compiler doesn't complain here. :( [...] > > + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { > > + fsl,pins = < > > + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ > > + >; > > + }; > > + > > + pinctrl_gpmi_nand: gpmi-nand { > > gpminandgrp > OK. > > + pinctrl_kpp: kppgrp { > > + fsl,pins = < > > + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 > > + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 > > + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 > > + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 > > + > > Drop it. > I guess you mean the empty line. OK. [...] > > +&uart2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; > > These two entries can be merged into one. > I prefer to have the handshake pinctrls separate from the data lines so that the uart can be used with or without RTS/CTS, without having to mess around with the pinctrl defs. Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________ From mboxrd@z Thu Jan 1 00:00:00 1970 From: LW@KARO-electronics.de (Lothar =?UTF-8?B?V2HDn21hbm4=?=) Date: Mon, 24 Mar 2014 13:01:29 +0100 Subject: [PATCH] ARM: dts: imx6: add support for Ka-Ro TX6 modules In-Reply-To: <20140322082352.GF5938@dragon> References: <1395235784-14034-1-git-send-email-LW@KARO-electronics.de> <20140322082352.GF5938@dragon> Message-ID: <20140324130129.1c2ec444@ipc1.ka-ro> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Shawn, it would help readability a lot if you would trim down the quoted parts of the original mail (like I did with [...] in this reply). Shawn Guo wrote: > On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Wa?mann wrote: > > This patch adds support for the Ka-Ro electronics GmbH TX6 modules. > > There are five distinct module types with either i.MX6Q or i.MX6DL and > > LVDS or LCD display interface and one DTS file for a complete system > > with an i.MX6DL based TX6 module and a baseboard mounted on the back > > of a display (imx6dl-tx6dl-comtft.dts). > > > > Signed-off-by: Lothar Wa?mann > > --- > > arch/arm/boot/dts/Makefile | 6 + > > arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts | 114 +++++ > > arch/arm/boot/dts/imx6dl-tx6u-801x.dts | 188 ++++++++ > > arch/arm/boot/dts/imx6dl-tx6u-811x.dts | 166 +++++++ > > arch/arm/boot/dts/imx6q-tx6q-1010.dts | 192 +++++++++ > > arch/arm/boot/dts/imx6q-tx6q-1020.dts | 192 +++++++++ > > arch/arm/boot/dts/imx6q-tx6q-1110.dts | 174 ++++++++ > > arch/arm/boot/dts/imx6qdl-tx6.dtsi | 672 +++++++++++++++++++++++++++++ > > 8 files changed, 1704 insertions(+) > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts > > create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts > > create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts > > create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi > > [...] > > diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > new file mode 100644 > > index 0000000..6df5a25 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts > > @@ -0,0 +1,114 @@ > > +/* > > + * Copyright 2014 Lothar Wa?mann > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +#include "imx6dl.dtsi" > > +#include "imx6qdl-tx6.dtsi" > > + > > +/ { > > + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; > > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > > Shouldn't it be "karo,imx6dl-tx6dl" instead? > Of course. :( > > + > > + aliases { > > + display = &display; > > + }; > > + > > + backlight: backlight { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm2 0 500000 0>; > > + power-supply = <®_3v3>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + display: display at di0 { > > + compatible = "fsl,imx-parallel-display"; > > + interface-pix-fmt = "rgb24"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_disp0_1>; > > + status = "okay"; > > + > > + port { > > + display0_in: endpoint { > > + remote-endpoint = <&ipu1_di0_disp0>; > > + }; > > + }; > > I do not have OF graph stuff in my tree yet. > You can apply the patch, once it arrives in your tree. [...] > > diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > new file mode 100644 > > index 0000000..c97fb42 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts > > @@ -0,0 +1,166 @@ > > +/* > > + * Copyright 2014 Lothar Wa?mann > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +/dts-v1/; > > +#include "imx6dl.dtsi" > > +#include "imx6qdl-tx6.dtsi" > > + > > +/ { > > + model = "Ka-Ro electronics TX6U-811x Module"; > > + compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl"; > > + > > + aliases { > > + display = &lvds0; > > + lvds0 = &lvds0; > > + lvds1 = &lvds1; > > + }; > > + > > + backlight0: backlight0 { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm2 0 500000 0>; > > + power-supply = <®_lcd0_pwr>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + backlight1: backlight1 { > > + compatible = "pwm-backlight"; > > + pwms = <&pwm1 0 500000 0>; > > + power-supply = <®_lcd1_pwr>; > > + /* > > + * a poor man's way to create a 1:1 relationship between > > + * the PWM value and the actual duty cycle > > + */ > > + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 > > + 10 11 12 13 14 15 16 17 18 19 > > + 20 21 22 23 24 25 26 27 28 29 > > + 30 31 32 33 34 35 36 37 38 39 > > + 40 41 42 43 44 45 46 47 48 49 > > + 50 51 52 53 54 55 56 57 58 59 > > + 60 61 62 63 64 65 66 67 68 69 > > + 70 71 72 73 74 75 76 77 78 79 > > + 80 81 82 83 84 85 86 87 88 89 > > + 90 91 92 93 94 95 96 97 98 99 > > + 100>; > > + default-brightness-level = <50>; > > + }; > > + > > + panel0 { > > The convention of device tree node is node-name at unit-address, so in this > case it should probably be panel at 0. > AFAIK that's only true for nodes that require a 'reg' property. Thus if it were: panels { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; panel at 0 { compatible = "simple-panel"; reg = <0>; power-supply = <®_3v3>; backlight = <&backlight0>; }; [...] > > diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > > new file mode 100644 > > index 0000000..828e7f3 > > --- /dev/null > > +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi > > @@ -0,0 +1,672 @@ > > +/* > > + * Copyright 2014 Lothar Wa?mann > > + * > > + * The code contained herein is licensed under the GNU General Public > > + * License. You may obtain a copy of the GNU General Public License > > + * Version 2 at the following locations: > > + * > > + * http://www.opensource.org/licenses/gpl-license.html > > + * http://www.gnu.org/copyleft/gpl.html > > + */ > > + > > +#include > > +#include > > +#include > > + > > +/ { > > + aliases { > > + can0 = &can2; > > + can1 = &can1; > > + ethernet0 = &fec; > > + lcdif_23bit_pins_a = &pinctrl_disp0_1; > > + lcdif_24bit_pins_a = &pinctrl_disp0_2; > > + pwm0 = &pwm1; > > + pwm1 = &pwm2; > > + reg_can_xcvr = ®_can_xcvr; > > + stk5led = &user_led; > > + usbotg = &usbotg; > > + sdhc0 = &usdhc1; > > + sdhc1 = &usdhc2; > > + }; > > + > > + memory { > > + reg = <0 0>; /* will be filled by U-Boot */ > > + }; > > + > > + clocks { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + mclk: codec_clock { > > clock at 0 > OK. > > +&can1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_flexcan1>; > > + xceiver-supply = <®_can_xcvr>; > > + > > Drop the new line. > OK. [...] > > +&i2c3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_i2c3>; > > + clock-frequency = <400000>; > > + status = "okay"; > > + > > + sgtl5000: sgtl5000 at 0a { > > + compatible = "fsl,sgtl5000"; > > + reg = <0x0a>; > > + VDDA-supply = <®_2v5>; > > + VDDIO-supply = <®_3v3>; > > + clocks = <&mclk>; > > + }; > > + > > + polytouch: edt-ft5x06 at 38 { > > + compatible = "edt,edt-ft5x06"; > > + reg = <0x38>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_edt_ft5x06>; > > + interrupt-parent = <&gpio6>; > > + interrupts = <15 0>; > > + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; > > Where are all these bindings documented? > That's one in a separate patch adding DT support to the edt_ft5x06 driver. > > + linux,wakeup; > > + }; > > + > > + touchscreen: tsc2007 at 48 { > > + compatible = "ti,tsc2007"; > > + reg = <0x48>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_tsc2007>; > > + interrupt-parent = <&gpio3>; > > + interrupts = <26 0>; > > + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; > > + ti,x-plate-ohms = <660>; > > + linux,wakeup; > > + }; > > +}; > > + > > +&iomuxc { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_hog>; > > + > > + imx6qdl-tx6 { > > + pinctrl_hog: hoggrp { > > + fsl,pins = < > > + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ > > + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ > > + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT > > Broken comment? > Yeah, right. Bad, that the compiler doesn't complain here. :( [...] > > + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { > > + fsl,pins = < > > + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ > > + >; > > + }; > > + > > + pinctrl_gpmi_nand: gpmi-nand { > > gpminandgrp > OK. > > + pinctrl_kpp: kppgrp { > > + fsl,pins = < > > + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 > > + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 > > + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 > > + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 > > + > > Drop it. > I guess you mean the empty line. OK. [...] > > +&uart2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; > > These two entries can be merged into one. > I prefer to have the handshake pinctrls separate from the data lines so that the uart can be used with or without RTS/CTS, without having to mess around with the pinctrl defs. Lothar Wa?mann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra?e 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch?ftsf?hrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info at karo-electronics.de ___________________________________________________________