On Tue, Apr 01, 2014 at 01:37:27PM +0300, Roger Quadros wrote:
> The USB3 PHY driver (ti-pipe3) was updated so that the relevant
> clock phandles are expected in the DT node.
> Provide the necessary clocks.
> 
> Reported-by: Kishon Vijay Abraham I <kishon@ti.com>
> Signed-off-by: Roger Quadros <rogerq@ti.com>

Great!!!

Acked-by: Felipe Balbi <balbi@ti.com>

> ---
>  arch/arm/boot/dts/omap5.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index 757f0b9..4df1e7a 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -794,6 +794,12 @@
>  				      <0x4a084c00 0x40>;
>  				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
>  				ctrl-module = <&omap_control_usb3phy>;
> +				clocks = <&usb_phy_cm_clk32k>,
> +					 <&sys_clkin>,
> +					 <&usb_otg_ss_refclk960m>;
> +				clock-names =	"wkupclk",
> +						"sysclk",
> +						"refclk";
>  				#phy-cells = <0>;
>  			};
>  		};
> -- 
> 1.8.3.2
> 

-- 
balbi