On D_CAN the RXOK, TXOK and LEC bits are cleared/set on read of the status register. No need to update them. Signed-off-by: Thomas Gleixner --- drivers/net/can/c_can/c_can.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) Index: linux-2.6/drivers/net/can/c_can/c_can.c =================================================================== --- linux-2.6.orig/drivers/net/can/c_can/c_can.c +++ linux-2.6/drivers/net/can/c_can/c_can.c @@ -1041,7 +1041,8 @@ static int c_can_handle_bus_err(struct n } /* set a `lec` value so that we can check for updates later */ - priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + if (priv->type != BOSCH_D_CAN) + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); stats->rx_packets++; stats->rx_bytes += cf->can_dlc; @@ -1066,11 +1067,13 @@ static int c_can_poll(struct napi_struct C_CAN_STS_REG); /* handle Tx/Rx events */ - if (priv->current_status & STATUS_TXOK) + if (priv->current_status & STATUS_TXOK && + priv->type != BOSCH_D_CAN) priv->write_reg(priv, C_CAN_STS_REG, priv->current_status & ~STATUS_TXOK); - if (priv->current_status & STATUS_RXOK) + if (priv->current_status & STATUS_RXOK && + priv->type != BOSCH_D_CAN) priv->write_reg(priv, C_CAN_STS_REG, priv->current_status & ~STATUS_RXOK);