From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758531AbaDKPIj (ORCPT ); Fri, 11 Apr 2014 11:08:39 -0400 Received: from top.free-electrons.com ([176.31.233.9]:46894 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757042AbaDKPI3 (ORCPT ); Fri, 11 Apr 2014 11:08:29 -0400 Date: Fri, 11 Apr 2014 12:07:59 -0300 From: "ezequiel.garcia@free-electrons.com" To: Alexey Brodkin , Brian Norris Cc: "linux-kernel@vger.kernel.org" , "linux-mtd@lists.infradead.org" , "devicetree@vger.kernel.org" , "Vineet.Gupta1@synopsys.com" , "Francois.Bedard@synopsys.com" , "grant.likely@linaro.org" , "dwmw2@infradead.org" , "computersforpeace@gmail.com" Subject: Re: [PATCH v2] axs_nand - add driver for NAND controller used on Synopsys AXS dev boards Message-ID: <20140411150759.GA19199@arch.cereza> References: <1396597089-1081-1-git-send-email-abrodkin@synopsys.com> <20140404140933.GA25772@arch.cereza> <1396851239.4081.10.camel@abrodkin-8560l.internal.synopsys.com> <1397227889.3284.17.camel@abrodkin-8560l.internal.synopsys.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1397227889.3284.17.camel@abrodkin-8560l.internal.synopsys.com> User-Agent: Mutt/1.5.22 (2013-10-16) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Apr 11, Alexey Brodkin wrote: > Hi Ezequiel, > > On Mon, 2014-04-07 at 10:13 +0400, Alexey Brodkin wrote: > > Hi Ezequiel, > > > > On Fri, 2014-04-04 at 11:09 -0300, Ezequiel Garcia wrote: > > > On Apr 04, Alexey Brodkin wrote: > > > > Signed-off-by: Alexey Brodkin > > > > > > > > > > Maybe it would be nice adding some driver description here, so the commit > > > log actually says something useful about the commit. > > > > Well, I thought about it but frankly I'm not sure if there's anything > > else to add to commit title "driver for NAND controller used on Synopsys > > AXS dev boards". > > > > Do you think more info may make sense? > > > > > > +/** > > > > + * axs_flag_wait_and_reset - Waits until requested flag in INT_STATUS register > > > > + * is set by HW and resets it by writing "1" in INT_CLR_STATUS. > > > > + * @host: Pointer to private data structure. > > > > + * @flag: Bit/flag offset in INT_STATUS register > > > > + */ > > > > +static void axs_flag_wait_and_reset(struct axs_nand_host *host, int flag) > > > > +{ > > > > + unsigned int i; > > > > + > > > > + for (i = 0; i < AXS_FLAG_WAIT_DELAY * 100; i++) { > > > > + unsigned int status = reg_get(host, INT_STATUS); > > > > + > > > > + if (status & (1 << flag)) { > > > > + reg_set(host, INT_CLR_STATUS, 1 << flag); > > > > + return; > > > > + } > > > > + > > > > + udelay(10); > > > > + } > > > > + > > > > + /* > > > > + * Since we cannot report this problem any further than > > > > + * axs_nand_{write|read}_buf() letting user know there's a problem. > > > > + */ > > > > + dev_err(host->dev, "Waited too long (%d s.) for flag/bit %d\n", > > > > + AXS_FLAG_WAIT_DELAY, flag); > > > > +} > > > > > > Hm... I'm not sure the above is really true. > > > > > > The NAND core uses the replaceable chip->waitfunc callback to check the > > > status of issued commands. See for instance: > > > > > > static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, > > > int page) > > > { > > > int status = 0; > > > const uint8_t *buf = chip->oob_poi; > > > int length = mtd->oobsize; > > > > > > chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); > > > chip->write_buf(mtd, buf, length); > > > /* Send command to program the OOB data */ > > > chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); > > > > > > status = chip->waitfunc(mtd, chip); > > > > > > return status & NAND_STATUS_FAIL ? -EIO : 0; > > > } > > > > > > On the other side, if you are clearing the flags in axs_flag_wait_and_reset() > > > it might be a bit hard for you to get this right. > > > > > > IOW, I'm not saying you *must* do this, but instead suggesting that you take > > > a look at waitfunc() and see if it helps report a proper error in the > > > read/write path. > > > > As I may understand from generic implementation of "waitfunc" in > > "nand_base.c" it checks status of NAND chip itself - which IMHO makes > > sense. And this is done via NAND_CMD_STATUS command sent to chip through > > NAND controller. > > > > In AXS NAND driver you may see 2 types of wait checks: > > 1. NAND_ISR_CMDDONE - this flag means that NAND controller has just > > executed provided command (i.e. set proper signal on control lines of > > NAND chip etc), but it doesn't mean NAND chip itself has completed > > command execution. That's why "waitfunc" is not direct replacement here. > > > > 2. NAND_ISR_{RX|TX}DMACOMPLETE - this flag indicates completion of DMA > > transfer to/from NAND chip to RAM. "waitfunc" won't work here as well. > > > > I hope this explanation makes sense. > > Please treat this message as a gentle reminder. > I'm wondering if my explanation in the previous email makes any sense or > I still need to fix stuff. Well, I was merely suggesting to look into using waitfunc(), so you definitely don't need to fix anything (at least from my side). Just as a comment, regarding your explanation above, I think you can override the waitfunc() and check the NAND_CMD_STATUS, together with the check for your ISR flags. However, you know more about your hardware than me, so this is *just* a suggestion. The driver looks fine broadly speaking. I guess it's up to Brian now to provide further feedback. -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com From mboxrd@z Thu Jan 1 00:00:00 1970 From: "ezequiel.garcia@free-electrons.com" Subject: Re: [PATCH v2] axs_nand - add driver for NAND controller used on Synopsys AXS dev boards Date: Fri, 11 Apr 2014 12:07:59 -0300 Message-ID: <20140411150759.GA19199@arch.cereza> References: <1396597089-1081-1-git-send-email-abrodkin@synopsys.com> <20140404140933.GA25772@arch.cereza> <1396851239.4081.10.camel@abrodkin-8560l.internal.synopsys.com> <1397227889.3284.17.camel@abrodkin-8560l.internal.synopsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1397227889.3284.17.camel@abrodkin-8560l.internal.synopsys.com> Sender: linux-kernel-owner@vger.kernel.org To: Alexey Brodkin Cc: "linux-kernel@vger.kernel.org" , "linux-mtd@lists.infradead.org" , "devicetree@vger.kernel.org" , "Vineet.Gupta1@synopsys.com" , "Francois.Bedard@synopsys.com" , "grant.likely@linaro.org" , "dwmw2@infradead.org" , "computersforpeace@gmail.com" List-Id: devicetree@vger.kernel.org On Apr 11, Alexey Brodkin wrote: > Hi Ezequiel, >=20 > On Mon, 2014-04-07 at 10:13 +0400, Alexey Brodkin wrote: > > Hi Ezequiel, > >=20 > > On Fri, 2014-04-04 at 11:09 -0300, Ezequiel Garcia wrote: > > > On Apr 04, Alexey Brodkin wrote: > > > > Signed-off-by: Alexey Brodkin > > > >=20 > > >=20 > > > Maybe it would be nice adding some driver description here, so th= e commit > > > log actually says something useful about the commit. > >=20 > > Well, I thought about it but frankly I'm not sure if there's anythi= ng > > else to add to commit title "driver for NAND controller used on Syn= opsys > > AXS dev boards". > >=20 > > Do you think more info may make sense? > >=20 > > > > +/** > > > > + * axs_flag_wait_and_reset - Waits until requested flag in INT= _STATUS register > > > > + * is set by HW and resets it by writing "1" in I= NT_CLR_STATUS. > > > > + * @host: Pointer to private data structure. > > > > + * @flag: Bit/flag offset in INT_STATUS register > > > > + */ > > > > +static void axs_flag_wait_and_reset(struct axs_nand_host *host= , int flag) > > > > +{ > > > > + unsigned int i; > > > > + > > > > + for (i =3D 0; i < AXS_FLAG_WAIT_DELAY * 100; i++) { > > > > + unsigned int status =3D reg_get(host, INT_STATUS); > > > > + > > > > + if (status & (1 << flag)) { > > > > + reg_set(host, INT_CLR_STATUS, 1 << flag); > > > > + return; > > > > + } > > > > + > > > > + udelay(10); > > > > + } > > > > + > > > > + /* > > > > + * Since we cannot report this problem any further than > > > > + * axs_nand_{write|read}_buf() letting user know there's a pr= oblem. > > > > + */ > > > > + dev_err(host->dev, "Waited too long (%d s.) for flag/bit %d\n= ", > > > > + AXS_FLAG_WAIT_DELAY, flag); > > > > +} > > >=20 > > > Hm... I'm not sure the above is really true. > > >=20 > > > The NAND core uses the replaceable chip->waitfunc callback to che= ck the > > > status of issued commands. See for instance: > > >=20 > > > static int nand_write_oob_std(struct mtd_info *mtd, struct nand_c= hip *chip, > > > int page) > > > { > > > int status =3D 0; > > > const uint8_t *buf =3D chip->oob_poi; > > > int length =3D mtd->oobsize; > > >=20 > > > chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); > > > chip->write_buf(mtd, buf, length); > > > /* Send command to program the OOB data */ > > > chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); > > >=20 > > > status =3D chip->waitfunc(mtd, chip); > > >=20 > > > return status & NAND_STATUS_FAIL ? -EIO : 0; > > > } > > >=20 > > > On the other side, if you are clearing the flags in axs_flag_wait= _and_reset() > > > it might be a bit hard for you to get this right. > > >=20 > > > IOW, I'm not saying you *must* do this, but instead suggesting th= at you take > > > a look at waitfunc() and see if it helps report a proper error in= the > > > read/write path. > >=20 > > As I may understand from generic implementation of "waitfunc" in > > "nand_base.c" it checks status of NAND chip itself - which IMHO mak= es > > sense. And this is done via NAND_CMD_STATUS command sent to chip th= rough > > NAND controller. > >=20 > > In AXS NAND driver you may see 2 types of wait checks: > > 1. NAND_ISR_CMDDONE - this flag means that NAND controller has just > > executed provided command (i.e. set proper signal on control lines = of > > NAND chip etc), but it doesn't mean NAND chip itself has completed > > command execution. That's why "waitfunc" is not direct replacement = here. > >=20 > > 2. NAND_ISR_{RX|TX}DMACOMPLETE - this flag indicates completion of = DMA > > transfer to/from NAND chip to RAM. "waitfunc" won't work here as we= ll. > >=20 > > I hope this explanation makes sense. >=20 > Please treat this message as a gentle reminder. > I'm wondering if my explanation in the previous email makes any sense= or > I still need to fix stuff. Well, I was merely suggesting to look into using waitfunc(), so you def= initely don't need to fix anything (at least from my side). Just as a comment, regarding your explanation above, I think you can ov= erride the waitfunc() and check the NAND_CMD_STATUS, together with the check f= or your ISR flags. However, you know more about your hardware than me, so this = is *just* a suggestion. The driver looks fine broadly speaking. I guess it's up to Brian now to= provide further feedback. --=20 Ezequiel Garc=EDa, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from top.free-electrons.com ([176.31.233.9] helo=mail.free-electrons.com) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1WYd4U-0006Cw-3z for linux-mtd@lists.infradead.org; Fri, 11 Apr 2014 15:08:50 +0000 Date: Fri, 11 Apr 2014 12:07:59 -0300 From: "ezequiel.garcia@free-electrons.com" To: Alexey Brodkin , Brian Norris Subject: Re: [PATCH v2] axs_nand - add driver for NAND controller used on Synopsys AXS dev boards Message-ID: <20140411150759.GA19199@arch.cereza> References: <1396597089-1081-1-git-send-email-abrodkin@synopsys.com> <20140404140933.GA25772@arch.cereza> <1396851239.4081.10.camel@abrodkin-8560l.internal.synopsys.com> <1397227889.3284.17.camel@abrodkin-8560l.internal.synopsys.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1397227889.3284.17.camel@abrodkin-8560l.internal.synopsys.com> Cc: "devicetree@vger.kernel.org" , "Francois.Bedard@synopsys.com" , "Vineet.Gupta1@synopsys.com" , "linux-kernel@vger.kernel.org" , "linux-mtd@lists.infradead.org" , "grant.likely@linaro.org" , "computersforpeace@gmail.com" , "dwmw2@infradead.org" List-Id: Linux MTD discussion mailing list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Apr 11, Alexey Brodkin wrote: > Hi Ezequiel, > > On Mon, 2014-04-07 at 10:13 +0400, Alexey Brodkin wrote: > > Hi Ezequiel, > > > > On Fri, 2014-04-04 at 11:09 -0300, Ezequiel Garcia wrote: > > > On Apr 04, Alexey Brodkin wrote: > > > > Signed-off-by: Alexey Brodkin > > > > > > > > > > Maybe it would be nice adding some driver description here, so the commit > > > log actually says something useful about the commit. > > > > Well, I thought about it but frankly I'm not sure if there's anything > > else to add to commit title "driver for NAND controller used on Synopsys > > AXS dev boards". > > > > Do you think more info may make sense? > > > > > > +/** > > > > + * axs_flag_wait_and_reset - Waits until requested flag in INT_STATUS register > > > > + * is set by HW and resets it by writing "1" in INT_CLR_STATUS. > > > > + * @host: Pointer to private data structure. > > > > + * @flag: Bit/flag offset in INT_STATUS register > > > > + */ > > > > +static void axs_flag_wait_and_reset(struct axs_nand_host *host, int flag) > > > > +{ > > > > + unsigned int i; > > > > + > > > > + for (i = 0; i < AXS_FLAG_WAIT_DELAY * 100; i++) { > > > > + unsigned int status = reg_get(host, INT_STATUS); > > > > + > > > > + if (status & (1 << flag)) { > > > > + reg_set(host, INT_CLR_STATUS, 1 << flag); > > > > + return; > > > > + } > > > > + > > > > + udelay(10); > > > > + } > > > > + > > > > + /* > > > > + * Since we cannot report this problem any further than > > > > + * axs_nand_{write|read}_buf() letting user know there's a problem. > > > > + */ > > > > + dev_err(host->dev, "Waited too long (%d s.) for flag/bit %d\n", > > > > + AXS_FLAG_WAIT_DELAY, flag); > > > > +} > > > > > > Hm... I'm not sure the above is really true. > > > > > > The NAND core uses the replaceable chip->waitfunc callback to check the > > > status of issued commands. See for instance: > > > > > > static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, > > > int page) > > > { > > > int status = 0; > > > const uint8_t *buf = chip->oob_poi; > > > int length = mtd->oobsize; > > > > > > chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); > > > chip->write_buf(mtd, buf, length); > > > /* Send command to program the OOB data */ > > > chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); > > > > > > status = chip->waitfunc(mtd, chip); > > > > > > return status & NAND_STATUS_FAIL ? -EIO : 0; > > > } > > > > > > On the other side, if you are clearing the flags in axs_flag_wait_and_reset() > > > it might be a bit hard for you to get this right. > > > > > > IOW, I'm not saying you *must* do this, but instead suggesting that you take > > > a look at waitfunc() and see if it helps report a proper error in the > > > read/write path. > > > > As I may understand from generic implementation of "waitfunc" in > > "nand_base.c" it checks status of NAND chip itself - which IMHO makes > > sense. And this is done via NAND_CMD_STATUS command sent to chip through > > NAND controller. > > > > In AXS NAND driver you may see 2 types of wait checks: > > 1. NAND_ISR_CMDDONE - this flag means that NAND controller has just > > executed provided command (i.e. set proper signal on control lines of > > NAND chip etc), but it doesn't mean NAND chip itself has completed > > command execution. That's why "waitfunc" is not direct replacement here. > > > > 2. NAND_ISR_{RX|TX}DMACOMPLETE - this flag indicates completion of DMA > > transfer to/from NAND chip to RAM. "waitfunc" won't work here as well. > > > > I hope this explanation makes sense. > > Please treat this message as a gentle reminder. > I'm wondering if my explanation in the previous email makes any sense or > I still need to fix stuff. Well, I was merely suggesting to look into using waitfunc(), so you definitely don't need to fix anything (at least from my side). Just as a comment, regarding your explanation above, I think you can override the waitfunc() and check the NAND_CMD_STATUS, together with the check for your ISR flags. However, you know more about your hardware than me, so this is *just* a suggestion. The driver looks fine broadly speaking. I guess it's up to Brian now to provide further feedback. -- Ezequiel García, Free Electrons Embedded Linux, Kernel and Android Engineering http://free-electrons.com