From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Fri, 25 Apr 2014 15:44:56 -0400 Subject: [U-Boot] Please pull u-boot-mpc85xx master In-Reply-To: <53584271.3040600@freescale.com> References: <53584271.3040600@freescale.com> Message-ID: <20140425194456.GG22182@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Apr 23, 2014 at 03:45:05PM -0700, York Sun wrote: > Tom, > > The following changes since commit b149c4c399b111cec1ff7505ca9fabbeeb4fe394: > > ARM:tegra20: Remove aes debug prints (2014-04-18 16:14:17 -0400) > > are available in the git repository at: > > git://git.denx.de/u-boot-mpc85xx.git master > > for you to fetch changes up to 08ad9b068afb8842df4cd559c327f54a42811a8d: > > ar8031: modify the config func of ar8031 to ar8021_config (2014-04-22 17:58:53 > -0700) > > ---------------------------------------------------------------- > Alexander Graf (6): > fdt_support: split fdt_getprop_u32_default > fdt_support: Add helper function to read "ranges" property > PPC: 85xx: Remove IVOR reset > PPC: 85xx: Generalize DDR TLB mapping function > PPC 85xx: Add ELF entry point > PPC 85xx: Add qemu-ppce500 machine > > Aneesh Bansal (9): > powerpc/p1010rdb: SECURE BOOT enabled for NAND > powerpc/p1010rdb: SECURE BOOT- enable workaround for IFC errata A003399 > powerpc/mpc8xxx: SECURE BOOT- Disable law 0 for non PBL platforms > powerpc/mpc85xx: SECURE BOOT- Add secure boot target for BSC9132QDS > powerpc/mpc85xx: SECURE BOOT- Add NAND secure boot target for BSC9132QDS > powerpc/mpc85xx: SECURE BOOT- Add secure boot target for B4860QDS > powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T4240QDS and T4160QDS > powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T2080QDS > powerpc/mpc85xx: SECURE BOOT- Add secure boot target for T1040QDS and T1040RDB > > Codrin Ciubotariu (2): > net/phy: Fix PHY id for VSC8514 > powerpc/cpu/mpc85xx: Add MAC address for layer 2 switch > > Haijun.Zhang (1): > Powerpc/mpc8536DS: Increase SPI/SD uboot Image size to 768K > > Nikhil Badola (4): > fsl/usb: Fix phy type for Second USB controller > fsl/usb: Workaround for USB erratum-A007075 > fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0 > powerpc/mpc85xx: Add Differential SYSCLK config support T1040 > > Prabhakar Kushwaha (19): > board/b4860qds:Slow MDC clock to comply IEEE specs in PBI config > driver/mmc: fix compile warnings > powerpc/T1040: add mtdparts suppport for T104xRDB and T1040QDS > board/t104xrdb: Add support of CPLD > powerpc/mpc85xx: Remove QE firmware copy from NAND > board/t1042rdb_pi: Disable CONFIG_QE and CONFIG_U_QE > powerpc/mpc85xx: Move LAW_EN define outside of config > powerpc/mpc85xx: Avoid hardcoding in SPL linker script > powerpc:Add support of SPL non-relocation > powerpc/mpc85xx:Disable non DDR LAWs before init_law > driver/ifc: define nand_spl_load_image() for SPL > driver/mtd/spi:Read 8KB data chunk during u-boot load in SPL > driver: Add support of image load for MMC & SPI in SPL > Makefile: Add support of CONFIG_SPL_FSL_PBL > board/b4qds:Add support of 2 stage NAND boot-loader > board/t104xrdb: Add support of NAND, SD, SPI boot for T104xRDB > powerpc/mpc85xx:Avoid fix address of bootpg section > powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot size > powerpc/mpc85xx:Update FM1 clock select and shift for B4420 > > Priyanka Jain (1): > driver/net/fm/memac_phy: Initialize mdio_clock for SoCs wih FMANv3 > > Scott Wood (1): > powerpc/85xx: Fix e6500 L2 cache stash IDs > > Shaohui Xie (3): > powerpc/t1040rdb: added a break in switch case > powerpc/t4240: updated RCW and PBI for rev2.0 > powerpc/T4QDS: add two stage boot of nand/sd > > Shengzhou Liu (6): > powerpc/t208xqds: fix nor chip selection when nand boot > powerpc/T208xQDS: add mtdparts suppport > powerpc/T208xRDB: add mtdparts suppport > board/t208xqds: Add support of 2-stage NAND/SPI/SD boot > board/t208xrdb: Add support of 2-stage NAND/SPI/SD boot > board/t2080rdb: some update for t2080rdb > > Tang Yuantian (4): > mpc85xx: Add support for the supplement configuration unit register > mpc85xx/t104x: Add deep sleep framework support > mpc85xx: Add deep sleep support on T1040QDS > mpc85xx: Add deep sleep support on T104xRDB > > York Sun (5): > driver/fsl_ifc: Add a function to finalize CS0 address binding > driver/ddr/fsl: Add DDR4 support to Freescale DDR driver > mpc85xx/T1040QDS_D4: Add DDR4 support > powerpc/mpc85xx: Add workaround for erratum A007212 > drivers/ddr: Fix possible out of bounds error > > Zhao Qiang (5): > QE/FMAN: modify CONFIG_SYS_QE_FMAN_FW_ADDR to CONFIG_SYS_FMAN_FW_ADDR and > CONFIG_SYS_QE_FW_ADDR > QE/U-QE: Add U-QE support > t1040rdb/qe: add QE support for T1040RDB > T1040QDS/U-QE: Add u-qe support to t1040qds > ar8031: modify the config func of ar8031 to ar8021_config > > vijay rai (2): > powerpc/t104xrdb: Unification of T104xRDB header files > powerpc/85xx: Enhance get_sys_info() to check clocking mode > > Makefile | 19 + > README | 37 +- > arch/powerpc/cpu/mpc85xx/Makefile | 2 + > arch/powerpc/cpu/mpc85xx/cmd_errata.c | 23 + > arch/powerpc/cpu/mpc85xx/cpu.c | 10 +- > arch/powerpc/cpu/mpc85xx/cpu_init.c | 161 +++++- > arch/powerpc/cpu/mpc85xx/cpu_init_early.c | 8 +- > arch/powerpc/cpu/mpc85xx/fdt.c | 41 +- > arch/powerpc/cpu/mpc85xx/fixed_ivor.S | 63 --- > arch/powerpc/cpu/mpc85xx/qe_io.c | 2 +- > arch/powerpc/cpu/mpc85xx/release.S | 3 - > arch/powerpc/cpu/mpc85xx/speed.c | 36 +- > arch/powerpc/cpu/mpc85xx/start.S | 34 +- > arch/powerpc/cpu/mpc85xx/t1040_ids.c | 1 + > arch/powerpc/cpu/mpc85xx/tlb.c | 49 +- > arch/powerpc/cpu/mpc85xx/u-boot-nand.lds | 8 +- > arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 19 +- > arch/powerpc/cpu/mpc85xx/u-boot.lds | 7 +- > arch/powerpc/cpu/mpc8xxx/law.c | 52 +- > arch/powerpc/include/asm/config_mpc85xx.h | 29 +- > arch/powerpc/include/asm/fsl_errata.h | 16 + > arch/powerpc/include/asm/fsl_liodn.h | 4 + > arch/powerpc/include/asm/fsl_secure_boot.h | 12 + > arch/powerpc/include/asm/immap_85xx.h | 35 +- > arch/powerpc/include/asm/mmu.h | 8 + > arch/powerpc/lib/board.c | 16 + > board/freescale/b4860qds/Makefile | 9 +- > board/freescale/b4860qds/b4_pbi.cfg | 3 + > board/freescale/b4860qds/ddr.c | 5 +- > board/freescale/b4860qds/spl.c | 114 ++++ > board/freescale/b4860qds/tlb.c | 10 + > board/freescale/qemu-ppce500/Makefile | 9 + > board/freescale/qemu-ppce500/qemu-ppce500.c | 348 ++++++++++++ > board/freescale/t1040qds/ddr.c | 17 +- > board/freescale/t1040qds/ddr.h | 37 +- > board/freescale/t1040qds/t1040qds.c | 39 ++ > board/freescale/t104xrdb/Makefile | 8 +- > board/freescale/t104xrdb/README | 73 +++ > board/freescale/t104xrdb/cpld.c | 112 ++++ > board/freescale/t104xrdb/cpld.h | 40 ++ > board/freescale/t104xrdb/ddr.c | 5 +- > board/freescale/t104xrdb/eth.c | 1 + > board/freescale/t104xrdb/spl.c | 122 ++++ > board/freescale/t104xrdb/t1040_rcw.cfg | 7 + > board/freescale/t104xrdb/t1042_rcw.cfg | 7 + > board/freescale/t104xrdb/t104x_pbi.cfg | 26 + > board/freescale/t104xrdb/t104xrdb.c | 23 + > board/freescale/t104xrdb/tlb.c | 12 + > board/freescale/t208xqds/Makefile | 5 + > board/freescale/t208xqds/ddr.c | 7 +- > board/freescale/t208xqds/spl.c | 137 +++++ > board/freescale/t208xqds/tlb.c | 7 + > board/freescale/t208xrdb/Makefile | 5 + > board/freescale/t208xrdb/README | 86 ++- > board/freescale/t208xrdb/cpld.h | 4 +- > board/freescale/t208xrdb/ddr.c | 8 +- > board/freescale/t208xrdb/spl.c | 107 ++++ > board/freescale/t208xrdb/t208xrdb.c | 2 +- > board/freescale/t208xrdb/tlb.c | 4 +- > board/freescale/t4qds/Makefile | 6 +- > board/freescale/t4qds/ddr.c | 6 +- > board/freescale/t4qds/spl.c | 141 +++++ > board/freescale/t4qds/t4_pbi.cfg | 14 - > board/freescale/t4qds/t4_rcw.cfg | 6 +- > board/freescale/t4qds/tlb.c | 8 +- > boards.cfg | 55 +- > common/ddr_spd.c | 45 +- > common/fdt_support.c | 132 ++++- > doc/README.b4860qds | 36 ++ > doc/README.t4240qds | 53 ++ > drivers/ddr/fsl/Makefile | 19 +- > drivers/ddr/fsl/ctrl_regs.c | 743 +++++++++++++++++++++++-- > drivers/ddr/fsl/ddr4_dimm_params.c | 300 ++++++++++ > drivers/ddr/fsl/fsl_ddr_gen4.c | 234 ++++++++ > drivers/ddr/fsl/interactive.c | 391 ++++++++++++- > drivers/ddr/fsl/lc_common_dimm_params.c | 407 ++++++++------ > drivers/ddr/fsl/main.c | 31 +- > drivers/ddr/fsl/mpc85xx_ddr_gen3.c | 52 +- > drivers/ddr/fsl/options.c | 142 ++--- > drivers/ddr/fsl/util.c | 26 +- > drivers/misc/fsl_ifc.c | 7 + > drivers/mmc/fsl_esdhc_spl.c | 32 +- > drivers/mtd/nand/fsl_ifc_spl.c | 13 - > drivers/mtd/spi/fsl_espi_spl.c | 29 +- > drivers/net/fm/fm.c | 12 +- > drivers/net/fm/memac_phy.c | 12 + > drivers/net/phy/atheros.c | 2 +- > drivers/net/phy/vitesse.c | 2 +- > drivers/qe/qe.c | 2 +- > drivers/qe/qe.h | 2 + > drivers/usb/host/ehci-fsl.c | 38 +- > include/common_timing_params.h | 23 +- > include/configs/B4860QDS.h | 74 ++- > include/configs/BSC9131RDB.h | 2 +- > include/configs/BSC9132QDS.h | 13 +- > include/configs/C29XPCIE.h | 2 +- > include/configs/MPC8536DS.h | 4 +- > include/configs/MPC8569MDS.h | 2 +- > include/configs/P1010RDB.h | 8 +- > include/configs/P1022DS.h | 2 +- > include/configs/P1023RDB.h | 4 +- > include/configs/P1023RDS.h | 6 +- > include/configs/P1_P2_RDB.h | 2 +- > include/configs/P2020DS.h | 2 +- > include/configs/P2041RDB.h | 12 +- > include/configs/T1040QDS.h | 38 +- > include/configs/T1040RDB.h | 687 ----------------------- > include/configs/{T1042RDB_PI.h => T104xRDB.h} | 216 +++++-- > include/configs/T208xQDS.h | 166 ++++-- > include/configs/T208xRDB.h | 139 ++++- > include/configs/T4240EMU.h | 2 +- > include/configs/T4240QDS.h | 105 +++- > include/configs/corenet_ds.h | 12 +- > include/configs/km/km8309-common.h | 2 +- > include/configs/km/kmp204x-common.h | 2 +- > include/configs/p1_p2_rdb_pc.h | 4 +- > include/configs/p1_twr.h | 4 +- > include/configs/qemu-ppce500.h | 206 +++++++ > include/configs/t4qds.h | 19 +- > include/ddr_spd.h | 226 +++++++- > include/e500.h | 3 + > include/fdt_support.h | 4 + > include/fsl_ddr.h | 7 +- > include/fsl_ddr_dimm_params.h | 77 ++- > include/fsl_ddr_sdram.h | 67 ++- > include/fsl_ddrc_version.h | 18 + > include/fsl_esdhc.h | 1 + > include/fsl_ifc.h | 1 + > include/fsl_immap.h | 35 +- > include/fsl_usb.h | 5 + > include/spi_flash.h | 1 + > include/usb/ehci-fsl.h | 7 + > nand_spl/board/freescale/mpc8536ds/Makefile | 6 +- > nand_spl/board/freescale/mpc8569mds/Makefile | 6 +- > nand_spl/board/freescale/mpc8572ds/Makefile | 6 +- > nand_spl/board/freescale/p1023rds/Makefile | 6 +- > nand_spl/board/freescale/p1_p2_rdb/Makefile | 6 +- > 137 files changed, 5777 insertions(+), 1555 deletions(-) > delete mode 100644 arch/powerpc/cpu/mpc85xx/fixed_ivor.S > create mode 100644 board/freescale/b4860qds/spl.c > create mode 100644 board/freescale/qemu-ppce500/Makefile > create mode 100644 board/freescale/qemu-ppce500/qemu-ppce500.c > create mode 100644 board/freescale/t104xrdb/cpld.c > create mode 100644 board/freescale/t104xrdb/cpld.h > create mode 100644 board/freescale/t104xrdb/spl.c > create mode 100644 board/freescale/t104xrdb/t1040_rcw.cfg > create mode 100644 board/freescale/t104xrdb/t1042_rcw.cfg > create mode 100644 board/freescale/t104xrdb/t104x_pbi.cfg > create mode 100644 board/freescale/t208xqds/spl.c > create mode 100644 board/freescale/t208xrdb/spl.c > create mode 100644 board/freescale/t4qds/spl.c > create mode 100644 drivers/ddr/fsl/ddr4_dimm_params.c > create mode 100644 drivers/ddr/fsl/fsl_ddr_gen4.c > delete mode 100644 include/configs/T1040RDB.h > rename include/configs/{T1042RDB_PI.h => T104xRDB.h} (78%) > create mode 100644 include/configs/qemu-ppce500.h > create mode 100644 include/fsl_ddrc_version.h Applied to u-boot/master, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: