From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751670AbaENSUy (ORCPT ); Wed, 14 May 2014 14:20:54 -0400 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:50495 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751029AbaENSUv (ORCPT ); Wed, 14 May 2014 14:20:51 -0400 Date: Wed, 14 May 2014 20:20:47 +0200 From: Pavel Machek To: Jiri Kosina Cc: "Rafael J. Wysocki" , Linux-pm mailing list , kernel list Subject: Re: 3.15-rc: regression in suspend Message-ID: <20140514182046.GA13342@amd.pavel.ucw.cz> References: <20140513160926.GA3621@amd.pavel.ucw.cz> <20140513163734.GA4602@amd.pavel.ucw.cz> <20140513214155.GA5087@amd.pavel.ucw.cz> <20140514155759.GB9723@amd.pavel.ucw.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20140514155759.GB9723@amd.pavel.ucw.cz> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Wed 2014-05-14 17:57:59, Pavel Machek wrote: > On Wed 2014-05-14 14:39:19, Jiri Kosina wrote: > > On Tue, 13 May 2014, Pavel Machek wrote: > > > > > > > There seems to be regression in 3.15 w.r.t. suspend to ram and suspend > > > > > to disk. > > > > > > > > > > Resume sometiems works, but often, system is half-usable, with "what > > > > > do you want to do suspend/hibernate" dialog staying on screen. > > > > > > > > > > I did echo disk > /sys/power/state, and echo never returned to the > > > > > shell prompt. (X was not really working, either.) > > > > > > > > > > It is still there on 3.15.0-rc3+. I'll update to rc5 now. > > > > > > > > 3.15.0-rc5+ seems to behave a bit better. Lets see if it reappears. > > > > > > It did. > > > > So it might in the end of the day the same thing as I have reported in > > > > https://bugs.freedesktop.org/show_bug.cgi?id=76554 > > > > which is not 100% reproducible either (although with newer kernels it's > > *much* more reproducible for me than with older). > > > > > It worked few times on -rc5, but then I rebooted and problem > > > re-appeared. > > > > If you could capture dmesg of the resume where X fails to resume properly > > to see whether you have i915 ring initialization errors there as well? > > I did dmesg and I believe I would have noticed "*ERROR*" there.. but > I'll of course capture the buffer when it happens. > > Note that X do work somehow after resume (I can't switch virtual > desktops and dialog is stuck on screen, but it is not complete > failure). I can do ctrl-alt-f1 and get to useful prompt. Oops. You were right. It seems it is duplicate after all. [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00001020 tail 00000000 start 00003000 Full dmesg is below. Oops, I already bisected one i915 regression this release :-(. Pavel Initializing cgroup subsys cpu Linux version 3.15.0-rc5+ (pavel@amd) (gcc version 4.4.5 (Debian 4.4.5-8) ) #355 SMP Tue May 13 18:19:09 CEST 2014 e820: BIOS-provided physical RAM map: BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved BIOS-e820: [mem 0x0000000000100000-0x00000000bd87dfff] usable BIOS-e820: [mem 0x00000000bd87e000-0x00000000bd900fff] ACPI NVS BIOS-e820: [mem 0x00000000bd901000-0x00000000bda42fff] reserved BIOS-e820: [mem 0x00000000bda43000-0x00000000bda56fff] ACPI NVS BIOS-e820: [mem 0x00000000bda57000-0x00000000bdb54fff] reserved BIOS-e820: [mem 0x00000000bdb55000-0x00000000bdb5dfff] ACPI data BIOS-e820: [mem 0x00000000bdb5e000-0x00000000bdb67fff] ACPI NVS BIOS-e820: [mem 0x00000000bdb68000-0x00000000bdb88fff] reserved BIOS-e820: [mem 0x00000000bdb89000-0x00000000bdb8efff] ACPI NVS BIOS-e820: [mem 0x00000000bdb8f000-0x00000000bdcfffff] usable BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! SMBIOS 2.4 present. DMI: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 e820: update [mem 0x00000000-0x00000fff] usable ==> reserved e820: remove [mem 0x000a0000-0x000fffff] usable e820: last_pfn = 0xbdd00 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-E7FFF uncachable E8000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F00000000 write-back 1 base 100000000 mask FC0000000 write-back 2 base 0BDD00000 mask FFFF00000 write-through 3 base 0BDE00000 mask FFFE00000 uncachable 4 base 0BE000000 mask FFE000000 uncachable 5 base 0C0000000 mask FC0000000 uncachable 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped: [mem 0x00000000-0x053fffff] Base memory trampoline at [c009a000] 9a000 size 16384 init_memory_mapping: [mem 0x00000000-0x000fffff] [mem 0x00000000-0x000fffff] page 4k init_memory_mapping: [mem 0x37000000-0x373fffff] [mem 0x37000000-0x373fffff] page 4k BRK [0x0510c000, 0x0510cfff] PGTABLE init_memory_mapping: [mem 0x30000000-0x36ffffff] [mem 0x30000000-0x36ffffff] page 4k BRK [0x0510d000, 0x0510dfff] PGTABLE BRK [0x0510e000, 0x0510efff] PGTABLE BRK [0x0510f000, 0x0510ffff] PGTABLE BRK [0x05110000, 0x05110fff] PGTABLE BRK [0x05111000, 0x05111fff] PGTABLE init_memory_mapping: [mem 0x00100000-0x2fffffff] [mem 0x00100000-0x2fffffff] page 4k init_memory_mapping: [mem 0x37400000-0x377fdfff] [mem 0x37400000-0x377fdfff] page 4k ACPI: RSDP 0x000F03C0 000024 (v02 INTEL ) ACPI: XSDT 0xBDB5CE18 000044 (v01 INTEL DG41MJ 00000006 MSFT 00010013) ACPI: FACP 0xBDB5BD98 0000F4 (v04 INTEL DG41RQ 00000006 MSFT 00010013) ACPI BIOS Warning (bug): 32/64X FACS address mismatch in FADT: 0xBDB5FF40/0x00000000BDB64F40, using 64-bit address (20140214/tbfadt-271) ACPI: DSDT 0xBDB55018 005983 (v01 INTEL DG41MJ 00000006 INTL 20051117) ACPI: FACS 0xBDB64F40 000040 ACPI: APIC 0xBDB5BF18 00006C (v02 INTEL DG41MJ 00000006 MSFT 00010013) ACPI: MCFG 0xBDB66E18 00003C (v01 INTEL DG41MJ 00000006 MSFT 00000097) ACPI: HPET 0xBDB66D98 000038 (v01 INTEL DG41MJ 00000006 AMI. 00000003) ACPI: Local APIC address 0xfee00000 2149MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 Zone ranges: DMA [mem 0x00001000-0x00ffffff] Normal [mem 0x01000000-0x377fdfff] HighMem [mem 0x377fe000-0xbdcfffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009dfff] node 0: [mem 0x00100000-0xbd87dfff] node 0: [mem 0xbdb8f000-0xbdcfffff] On node 0 totalpages: 776588 free_area_init_node: node 0, pgdat c4b58980, node_mem_map f5885024 DMA zone: 36 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3997 pages, LIFO batch:0 Normal zone: 1962 pages used for memmap Normal zone: 223230 pages, LIFO batch:31 HighMem zone: 4836 pages used for memmap HighMem zone: 549361 pages, LIFO batch:31 Using APIC driver default Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 smpboot: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @f7794000 s29312 r0 d23936 u53248 pcpu-alloc: s29312 r0 d23936 u53248 alloc=13*4096 pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774590 Kernel command line: BOOT_IMAGE=(hd0,2)/l/linux-good/arch/x86/boot/bzImage root=/dev/sda3 resume=/dev/sda1 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing CPU#0 xsave: enabled xstate_bv 0x3, cntxt size 0x240 Initializing HighMem for node 0 (000377fe:000bdd00) Initializing Movable for node 0 (00000000:00000000) Memory: 3059448K/3106352K available (8175K kernel code, 533K rwdata, 3012K rodata, 492K init, 5108K bss, 46904K reserved, 2197444K highmem) virtual kernel memory layout: fixmap : 0xffe6f000 - 0xfffff000 (1600 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc4b76000 - 0xc4bf1000 ( 492 kB) .data : 0xc47fc1cf - 0xc4b746c0 (3553 kB) .text : 0xc4000000 - 0xc47fc1cf (8176 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. Hierarchical RCU implementation. RCU dyntick-idle grace-period acceleration is enabled. RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 NR_IRQS:2304 nr_irqs:712 16 CPU 0 irqstacks, hard=f541a000 soft=f541c000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 16384 ... MAX_LOCKDEP_CHAINS: 32768 ... CHAINHASH_SIZE: 16384 memory used by lock dependency info: 3551 kB per task-struct memory footprint: 1152 bytes ODEBUG: 11 of 11 active objects replaced hpet clockevent registered tsc: Fast TSC calibration using PIT tsc: Detected 2800.142 MHz processor Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.28 BogoMIPS (lpj=11200568) pid_max: default: 32768 minimum: 301 ACPI: Core revision 20140214 ACPI: All ACPI Tables successfully acquired Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 tlb_flushall_shift: -1 debug: unmapping init [mem 0xc4bf1000-0xc4bf8fff] Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (fam: 06, model: 17, stepping: 0a) Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic registers: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 0000000700000003 CPU 1 irqstacks, hard=f55b8000 soft=f55ba000 x86: Booting SMP configuration: .... node #0, CPUs: #1 Initializing CPU#1 x86: Booted up 1 node, 2 CPUs smpboot: Total of 2 processors activated (11200.56 BogoMIPS) NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xbd87e000-0xbd900fff] (536576 bytes) PM: Registering ACPI NVS region [mem 0xbda43000-0xbda56fff] (81920 bytes) PM: Registering ACPI NVS region [mem 0xbdb5e000-0xbdb67fff] (40960 bytes) PM: Registering ACPI NVS region [mem 0xbdb89000-0xbdb8efff] (24576 bytes) NET: Registered protocol family 16 cpuidle: using governor ladder cpuidle: using governor menu ACPI: bus type PCI registered acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: Executed 1 blocks of module-level executable AML code ACPI: SSDT 0xBDB5FC18 0002CC (v01 AMI IST 00000001 MSFT 03000001) ACPI: Dynamic OEM Table Load: ACPI: SSDT 0x00000000 0002CC (v01 AMI IST 00000001 MSFT 03000001) ACPI: Interpreter enabled ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: \_PR_.CPU3: failed to get CPU APIC ID. ACPI: \_PR_.CPU4: failed to get CPU APIC ID. ACPI: \_PR_.CPU5: failed to get CPU APIC ID. ACPI: \_PR_.CPU6: failed to get CPU APIC ID. ACPI: \_PR_.CPU7: failed to get CPU APIC ID. ACPI: \_PR_.CPU8: failed to get CPU APIC ID. ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000 pci 0000:00:01.0: [8086:2e31] type 01 class 0x060400 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: System wakeup disabled by ACPI pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000 pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] pci 0000:00:02.0: reg 0x20: [io 0xf140-0xf147] pci 0000:00:02.1: [8086:2e33] type 00 class 0x038000 pci 0000:00:02.1: reg 0x10: [mem 0xd0400000-0xd04fffff 64bit] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 pci 0000:00:1b.0: reg 0x10: [mem 0xd0600000-0xd0603fff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: System wakeup disabled by ACPI pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: System wakeup disabled by ACPI pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 pci 0000:00:1d.0: reg 0x20: [io 0xf080-0xf09f] pci 0000:00:1d.0: System wakeup disabled by ACPI pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 pci 0000:00:1d.1: reg 0x20: [io 0xf060-0xf07f] pci 0000:00:1d.1: System wakeup disabled by ACPI pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 pci 0000:00:1d.2: reg 0x20: [io 0xf040-0xf05f] pci 0000:00:1d.2: System wakeup disabled by ACPI pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 pci 0000:00:1d.3: reg 0x20: [io 0xf020-0xf03f] pci 0000:00:1d.3: System wakeup disabled by ACPI pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 pci 0000:00:1d.7: reg 0x10: [mem 0xd0604000-0xd06043ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: System wakeup disabled by ACPI pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 pci 0000:00:1e.0: System wakeup disabled by ACPI pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 pci 0000:00:1f.0: can't claim BAR 7 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 0x18: [io 0x08f0-0x08f7] pci 0000:00:1f.1: reg 0x1c: [io 0x08f8-0x08fb] pci 0000:00:1f.1: reg 0x20: [io 0xf0f0-0xf0ff] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f pci 0000:00:1f.2: reg 0x10: [io 0xf0e0-0xf0e7] pci 0000:00:1f.2: reg 0x14: [io 0xf0d0-0xf0d3] pci 0000:00:1f.2: reg 0x18: [io 0xf0c0-0xf0c7] pci 0000:00:1f.2: reg 0x1c: [io 0xf0b0-0xf0b3] pci 0000:00:1f.2: reg 0x20: [io 0xf0a0-0xf0af] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff] pci 0000:03:00.0: reg 0x18: [mem 0xd0514000-0xd0514fff 64bit pref] pci 0000:03:00.0: reg 0x20: [mem 0xd0510000-0xd0513fff 64bit pref] pci 0000:03:00.0: reg 0x30: [mem 0xd0500000-0xd050ffff pref] pci 0000:03:00.0: supports D1 D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: Enabled 2 GPEs in block 00 to 1F vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:00:02.0 SCSI subsystem initialized libata version 3.00 loaded. ACPI: bus type USB registered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff] e820: reserve RAM buffer [mem 0xbd87e000-0xbfffffff] e820: reserve RAM buffer [mem 0xbdd00000-0xbfffffff] Bluetooth: Core ver 2.19 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at net/wireless/reg.c:479 regulatory_init+0x88/0xf5() db.txt is empty, you should update it... Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc5+ #355 Hardware name: /DG41MJ, BIOS MJG4110H.86A.0006.2009.1223.1155 12/23/2009 000001df f5517e44 c47f5aaf c4a9ff8c f5517e74 c403875a c4aa9e34 f5517ea0 00000001 c4a9ff8c 000001df c4bac935 c4bac935 00000000 c4bac7d6 f5517ec8 f5517e8c c40387fe 00000009 f5517e84 c4aa9e34 f5517ea0 f5517ecc c4bac935 Call Trace: [] dump_stack+0x41/0x52 [] warn_slowpath_common+0x7a/0xa0 [] ? regulatory_init+0x88/0xf5 [] ? regulatory_init+0x88/0xf5 [] ? cache_initialize+0x86/0x86 [] warn_slowpath_fmt+0x2e/0x30 [] regulatory_init+0x88/0xf5 [] cfg80211_init+0x5f/0xd7 [] ? bt_init+0x6e/0x98 [] do_one_initcall+0xca/0x180 [] ? __wake_up+0x1b/0x50 [] ? repair_env_string+0x15/0x5b [] ? parse_args+0x1f1/0x440 [] kernel_init_freeable+0xec/0x191 [] ? kernel_init_freeable+0x191/0x191 [] kernel_init+0xb/0xe0 [] ret_from_kernel_thread+0x21/0x30 [] ? rest_init+0xb0/0xb0 ---[ end trace 61e8190fed118a63 ]--- cfg80211: Calling CRDA to update world regulatory domain Switched to clocksource hpet pnp: PnP ACPI init ACPI: bus type PNP registered system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved system 00:00: [mem 0xe0000000-0xefffffff] has been reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) system 00:01: [io 0x0800-0x087f] could not be reserved system 00:01: [io 0x0480-0x04bf] has been reserved system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:01: [mem 0xff000000-0xffffffff] could not be reserved system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [dma 0 disabled] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:04: [dma 3] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active) pnp 00:05: [dma 4] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active) system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) pnp: PnP ACPI: found 11 devices ACPI: bus type PNP unregistered pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:1c.0: BAR 8: assigned [mem 0xd0700000-0xd08fffff] pci 0000:00:1c.0: BAR 9: assigned [mem 0xd0900000-0xd0afffff 64bit pref] pci 0000:00:1c.1: BAR 9: assigned [mem 0xd0b00000-0xd0cfffff 64bit pref] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01] pci 0000:00:1c.0: PCI bridge to [bus 02] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.0: bridge window [mem 0xd0700000-0xd08fffff] pci 0000:00:1c.0: bridge window [mem 0xd0900000-0xd0afffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff] pci 0000:00:1c.1: bridge window [mem 0xd0500000-0xd05fffff] pci 0000:00:1c.1: bridge window [mem 0xd0b00000-0xd0cfffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0700000-0xd08fffff] pci_bus 0000:02: resource 2 [mem 0xd0900000-0xd0afffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] pci_bus 0000:03: resource 1 [mem 0xd0500000-0xd05fffff] pci_bus 0000:03: resource 2 [mem 0xd0b00000-0xd0cfffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0xc0000000-0xffffffff] NET: Registered protocol family 2 TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 6, 294912 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP: reno registered UDP hash table entries: 512 (order: 3, 40960 bytes) UDP-Lite hash table entries: 512 (order: 3, 40960 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device PCI: CLS 64 bytes, default 64 futex hash table entries: 1024 (order: 4, 65536 bytes) bounce pool size: 64 pages ntfs: driver 2.1.30 [Flags: R/W]. fuse init (API version 7.23) msgmni has been set to 1683 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed usbcore: registered new interface driver udlfb intel_idle: does not run on family 6 model 23 input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] GHES: HEST is not enabled! ERST DBG: ERST support is disabled. Error: Driver 'battery' is already registered, aborting... Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A lp: driver loaded but no devices found Non-volatile memory driver v1.3 intel_rng: Firmware space is locked read-only. If you can't or intel_rng: don't want to disable this in firmware setup, and if intel_rng: you are certain that your system has a functional intel_rng: RNG, try using the 'no_fwh_detect' option. Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G41 Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 32768K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [drm] Initialized drm 1.1.0 20060810 [drm] Memory usable by graphics device = 2048M [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] Driver supports precise vblank timestamp query. vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem fbcon: inteldrmfb (fb0) is primary device Console: switching to colour frame buffer device 192x60 i915 0000:00:02.0: fb0: inteldrmfb frame buffer device i915 0000:00:02.0: registered panic notifier ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20140214/video-1251) ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no) input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2 [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 parport_pc 00:04: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). loop: module loaded nbd: registered device at major 43 ata_piix 0000:00:1f.1: version 2.13 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf0f0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf0f8 irq 15 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata2: port disabled--ignoring scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xf0e0 ctl 0xf0d0 bmdma 0xf0a0 irq 19 ata4: SATA max UDMA/133 cmd 0xf0c0 ctl 0xf0b0 bmdma 0xf0a8 irq 19 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k e1000e: Copyright(c) 1999 - 2014 Intel Corporation. r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:03:00.0 eth0: RTL8168d/8111d at 0xf8024000, 00:27:0e:2a:43:71, XID 081000c0 IRQ 17 r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] PPP generic driver version 2.4.2 PPP BSD Compression module registered PPP Deflate Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds iwl3945: Copyright(c) 2003-2011 Intel Corporation usbcore: registered new interface driver ax88179_178a usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus usbcore: registered new interface driver cdc_ncm ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:1d.7: EHCI Host Controller ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:1d.7: debug port 1 ehci-pci 0000:00:1d.7: cache line size of 64 is not supported ehci-pci 0000:00:1d.7: irq 23, io mem 0xd0604000 ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 3.15.0-rc5+ ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci-pci: OHCI PCI platform driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: detected 2 ports uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f080 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: detected 2 ports uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f060 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: detected 2 ports uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f040 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: detected 2 ports uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000f020 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller ata3.01: NODEV after polling detection usb usb5: Manufacturer: Linux 3.15.0-rc5+ uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata3.00: ATAPI: HL-DT-ST DVDRAM GT20N, CQ02, max UDMA/133 usbcore: registered new interface driver cdc_acm cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver usblp usbcore: registered new interface driver usb-storage usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver usbserial usbcore: registered new interface driver usbserial_generic usbserial: USB Serial support registered for generic usbcore: registered new interface driver ftdi_sio usbserial: USB Serial support registered for FTDI USB Serial Device usbcore: registered new interface driver option usbserial: USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver pl2303 usbserial: USB Serial support registered for pl2303 usbcore: registered new interface driver ti_usb_3410_5052 usbserial: USB Serial support registered for TI USB 3410 1 port adapter usbserial: USB Serial support registered for TI USB 5052 2 port adapter driver ftdi-elan usbcore: registered new interface driver ftdi-elan i8042: PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input4 rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 ata3.00: configured for UDMA/133 rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CQ02 PQ: 0 ANSI: 5 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized usbcore: registered new interface driver btusb lguest: mapped switcher at ffe65000 sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman hidraw: raw HID events driver (C) Jiri Kosina usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver snd-usb-audio sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 2:0:0:0: Attached scsi CD-ROM sr0 sr 2:0:0:0: Attached scsi generic sg0 type 5 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP: cubic registered NET: Registered protocol family 17 Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: BNEP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 Bluetooth: HIDP socket layer initialized Using IPI No-Shortcut mode ata4.00: ATA-9: ST1000LM014-1EJ164, SM11, max UDMA/133 rtc_cmos 00:06: setting system clock to 2014-05-13 19:46:01 UTC (1400010361) ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) PM: Checking hibernation image partition /dev/sda1 sound hdaudioC0D2: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) sound hdaudioC0D2: mono: mono_out=0x0 sound hdaudioC0D2: inputs: sound hdaudioC0D2: Front Mic=0x19 sound hdaudioC0D2: Rear Mic=0x18 sound hdaudioC0D2: Line=0x1a input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 usb 1-4: new high-speed USB device number 2 using ehci-pci ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST1000LM014-1EJ1 SM11 PQ: 0 ANSI: 5 sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 3:0:0:0: Attached scsi generic sg1 type 0 sd 3:0:0:0: [sda] 4096-byte physical blocks sd 3:0:0:0: [sda] Write Protect is off sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 3:0:0:0: [sda] Attached SCSI disk PM: Hibernation image partition 8:1 present PM: Looking for hibernation image. PM: Image not found (code -22) PM: Hibernation image not present or could not be loaded. ALSA device list: #0: HDA Intel at 0xd0600000 irq 16 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 0 and added 0 devices. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:3. devtmpfs: mounted debug: unmapping init [mem 0xc4b76000-0xc4bf0fff] Write protecting the kernel text: 8180k Write protecting the kernel read-only data: 3016k usb 1-4: New USB device found, idVendor=058f, idProduct=6362 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: Mass Storage Device usb 1-4: Manufacturer: Generic usb 1-4: SerialNumber: 058F312D81B usb-storage 1-4:1.0: USB Mass Storage device detected scsi4 : usb-storage 1-4:1.0 tsc: Refined TSC clocksource calibration: 2799.956 MHz udev[1661]: starting version 164 usb 5-1: new low-speed USB device number 2 using uhci_hcd usb 5-1: New USB device found, idVendor=046d, idProduct=c050 usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-1: Product: USB-PS/2 Optical Mouse usb 5-1: Manufacturer: Logitech input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/0003:046D:C050.0001/input/input10 hid-generic 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-1/input0 usb 5-2: new low-speed USB device number 3 using uhci_hcd scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 sd 4:0:0:0: [sdb] Attached SCSI removable disk sd 4:0:0:1: Attached scsi generic sg3 type 0 scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 sd 4:0:0:1: [sdc] Attached SCSI removable disk sd 4:0:0:2: Attached scsi generic sg4 type 0 scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 sd 4:0:0:2: [sdd] Attached SCSI removable disk Adding 2097148k swap on /dev/sda1. Priority:-1 extents:1 across:2097148k sd 4:0:0:3: Attached scsi generic sg5 type 0 sd 4:0:0:3: [sde] Attached SCSI removable disk Switched to clocksource tsc EXT3-fs (sda3): using internal journal usb 5-2: New USB device found, idVendor=04f2, idProduct=0111 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: USB Keyboard usb 5-2: Manufacturer: Chicony input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/0003:04F2:0111.0002/input/input11 hid-generic 0003:04F2:0111.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input0 input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/0003:04F2:0111.0003/input/input12 hid-generic 0003:04F2:0111.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.3-2/input1 EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro EXT3-fs (sda4): error: can't find ext3 filesystem on dev sda4. random: nonblocking pool is initialized input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13 r8169 0000:03:00.0: Direct firmware load failed with error -2 r8169 0000:03:00.0: Falling back to user helper r8169 0000:03:00.0 eth1: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-12) r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link down sshd (3175): /proc/3175/oom_adj is deprecated, please use /proc/3175/oom_score_adj instead. r8169 0000:03:00.0 eth1: link up perf interrupt took too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 perf interrupt took too long (5008 > 5000), lowering kernel.perf_event_max_sample_rate to 25000 PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.006 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.007 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 3:0:0:0: [sda] Synchronizing SCSI cache parport_pc 00:04: disabled sd 3:0:0:0: [sda] Stopping disk serial 00:03: disabled serial 00:03: System wakeup disabled by ACPI PM: suspend of devices complete after 334.723 msecs PM: suspend devices took 0.336 seconds PM: late suspend of devices complete after 16.001 msecs pcieport 0000:00:1c.1: System wakeup enabled by ACPI ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI PM: noirq suspend of devices complete after 16.089 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... smpboot: CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 TSC synchronization [CPU#0 -> CPU#1]: Measured 2298956531 cycles TSC warp between CPUs, turning off TSC clock. tsc: Marking TSC unstable due to check_tsc_sync_source failed CPU1 is up ACPI: Waking up from system sleep state S3 ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event Switched to clocksource hpet uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI PM: noirq resume of devices complete after 1270502.801 msecs PM: early resume of devices complete after 1.691 msecs usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset serial 00:03: activated parport_pc 00:04: activated pcieport 0000:00:1c.1: System wakeup disabled by ACPI ata2: port disabled--ignoring sd 3:0:0:0: [sda] Starting disk ata3.01: NODEV after polling detection ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: configured for UDMA/133 ata4.00: configured for UDMA/133 usb 5-2: reset low-speed USB device number 3 using uhci_hcd usb 5-1: reset low-speed USB device number 2 using uhci_hcd PM: resume of devices complete after 2922.312 msecs PM: resume devices took 2.924 seconds ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event() PM: Finishing wakeup. Restarting tasks ... i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings done. video LNXVIDEO:00: Restoring backlight state r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link up PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.010 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.011 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 3:0:0:0: [sda] Synchronizing SCSI cache sd 3:0:0:0: [sda] Stopping disk parport_pc 00:04: disabled serial 00:03: disabled serial 00:03: System wakeup disabled by ACPI PM: suspend of devices complete after 322.768 msecs PM: suspend devices took 0.324 seconds PM: late suspend of devices complete after 15.985 msecs pcieport 0000:00:1c.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI PM: noirq suspend of devices complete after 16.100 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... smpboot: CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 CPU1 is up ACPI: Waking up from system sleep state S3 ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI PM: noirq resume of devices complete after 13.758 msecs PM: early resume of devices complete after 1.325 msecs usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset serial 00:03: activated parport_pc 00:04: activated pcieport 0000:00:1c.1: System wakeup disabled by ACPI ata2: port disabled--ignoring sd 3:0:0:0: [sda] Starting disk ata3.01: NODEV after polling detection ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata3.00: configured for UDMA/133 ata4.00: configured for UDMA/133 usb 5-2: reset low-speed USB device number 3 using uhci_hcd usb 5-1: reset low-speed USB device number 2 using uhci_hcd PM: resume of devices complete after 3046.488 msecs PM: resume devices took 3.048 seconds ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event() PM: Finishing wakeup. Restarting tasks ... i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings done. video LNXVIDEO:00: Restoring backlight state r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link up PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.011 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) sd 3:0:0:0: [sda] Synchronizing SCSI cache parport_pc 00:04: disabled serial 00:03: disabled serial 00:03: System wakeup disabled by ACPI sd 3:0:0:0: [sda] Stopping disk PM: suspend of devices complete after 350.696 msecs PM: suspend devices took 0.352 seconds PM: late suspend of devices complete after 15.995 msecs pcieport 0000:00:1c.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI PM: noirq suspend of devices complete after 16.097 msecs ACPI: Preparing to enter system sleep state S3 PM: Saving platform NVS memory Disabling non-boot CPUs ... smpboot: CPU 1 is now offline ACPI: Low-level resume complete PM: Restoring platform NVS memory Enabling non-boot CPUs ... x86: Booting SMP configuration: smpboot: Booting Node 0 Processor 1 APIC 0x1 Initializing CPU#1 CPU1 is up ACPI: Waking up from system sleep state S3 ACPI: \_SB_.PWRB: ACPI_NOTIFY_DEVICE_WAKE event ACPI: \_SB_.PCI0.USB0: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB1: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB2: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.USB3: ACPI_NOTIFY_BUS_CHECK event ACPI: \_SB_.PCI0.EUSB: ACPI_NOTIFY_BUS_CHECK event uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI PM: noirq resume of devices complete after 16.838 msecs PM: early resume of devices complete after 1.327 msecs usb usb2: root hub lost power or was reset usb usb3: root hub lost power or was reset usb usb4: root hub lost power or was reset usb usb5: root hub lost power or was reset pcieport 0000:00:1c.1: System wakeup disabled by ACPI serial 00:03: activated parport_pc 00:04: activated ata2: port disabled--ignoring sd 3:0:0:0: [sda] Starting disk [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00001020 tail 00000000 start 00003000 ata3.01: NODEV after polling detection ata3.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata4.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -5 PM: Device 0000:00:02.0 failed to resume async: error -5 ata3.00: configured for UDMA/133 ata4.00: configured for UDMA/133 usb 5-1: reset low-speed USB device number 2 using uhci_hcd usb 5-2: reset low-speed USB device number 3 using uhci_hcd PM: resume of devices complete after 2964.956 msecs PM: resume devices took 2.964 seconds ACPI: \_SB_.PCI0.USB0: Bus check in hotplug_event() PM: Finishing wakeup. Restarting tasks ... i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB1: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB2: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.USB3: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings ACPI: \_SB_.PCI0.EUSB: Bus check in hotplug_event() i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment pci 0000:00:1e.0: PCI bridge to [bus 04] agpgart-intel 0000:00:00.0: no hotplug settings from platform agpgart-intel 0000:00:00.0: using default PCI settings pcieport 0000:00:01.0: no hotplug settings from platform i915 0000:00:02.0: no hotplug settings from platform i915 0000:00:02.0: using default PCI settings pci 0000:00:02.1: no hotplug settings from platform pci 0000:00:02.1: using default PCI settings snd_hda_intel 0000:00:1b.0: no hotplug settings from platform pcieport 0000:00:1c.0: no hotplug settings from platform pcieport 0000:00:1c.1: no hotplug settings from platform r8169 0000:03:00.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: no hotplug settings from platform uhci_hcd 0000:00:1d.0: using default PCI settings uhci_hcd 0000:00:1d.1: no hotplug settings from platform uhci_hcd 0000:00:1d.1: using default PCI settings uhci_hcd 0000:00:1d.2: no hotplug settings from platform uhci_hcd 0000:00:1d.2: using default PCI settings uhci_hcd 0000:00:1d.3: no hotplug settings from platform uhci_hcd 0000:00:1d.3: using default PCI settings ehci-pci 0000:00:1d.7: no hotplug settings from platform ehci-pci 0000:00:1d.7: using default PCI settings pci 0000:00:1e.0: no hotplug settings from platform pci 0000:00:1e.0: using default PCI settings pci 0000:00:1f.0: no hotplug settings from platform pci 0000:00:1f.0: using default PCI settings ata_piix 0000:00:1f.1: no hotplug settings from platform ata_piix 0000:00:1f.1: using default PCI settings ata_piix 0000:00:1f.2: no hotplug settings from platform ata_piix 0000:00:1f.2: using default PCI settings pci 0000:00:1f.3: no hotplug settings from platform pci 0000:00:1f.3: using default PCI settings done. video LNXVIDEO:00: Restoring backlight state r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link down r8169 0000:03:00.0 eth1: link up -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html