>From 70b8ac1d64192954e04bc4a4f2736349d7df6a8a Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 26 Jun 2014 09:50:25 +1000 Subject: [PATCH] powerpc/eeh: sysfs entries lost The sysfs entries are lost because of commit 2213fb1 ("powerpc/eeh: Skip eeh sysfs when eeh is disabled"). That commit added condition to create sysfs entries with EEH_ENABLED, which isn't populated when trying to create sysfs entries on PowerNV platform during system boot time. The patch fixes the issue by: * Reoder EEH initialization functions so that they're same on PowerNV/pSeries. * Cache PE's primary bus by PowerNV platform instead of EEH core to avoid kernel crash caused by the function reorder. Another benefit with this is to avoid one eeh_probe_mode_dev() in EEH core. Reported-by: Mike Qiu Signed-off-by: Gavin Shan --- arch/powerpc/kernel/eeh_pe.c | 11 ----------- arch/powerpc/platforms/powernv/eeh-powernv.c | 17 ++++++++++++++++- arch/powerpc/platforms/powernv/pci-ioda.c | 2 +- 3 files changed, 17 insertions(+), 13 deletions(-) diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index fbd01eb..1dce071a 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -351,17 +351,6 @@ int eeh_add_to_parent_pe(struct eeh_dev *edev) pe->config_addr = edev->config_addr; /* - * While doing PE reset, we probably hot-reset the - * upstream bridge. However, the PCI devices including - * the associated EEH devices might be removed when EEH - * core is doing recovery. So that won't safe to retrieve - * the bridge through downstream EEH device. We have to - * trace the parent PCI bus, then the upstream bridge. - */ - if (eeh_probe_mode_dev()) - pe->bus = eeh_dev_to_pci_dev(edev)->bus; - - /* * Put the new EEH PE into hierarchy tree. If the parent * can't be found, the newly created PE will be attached * to PHB directly. Otherwise, we have to associate the diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 56a206f..48eb223 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -107,6 +107,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) struct pnv_phb *phb = hose->private_data; struct device_node *dn = pci_device_to_OF_node(dev); struct eeh_dev *edev = of_node_to_eeh_dev(dn); + int ret; /* * When probing the root bridge, which doesn't have any @@ -143,7 +144,21 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag) edev->pe_config_addr = phb->bdfn_to_pe(phb, dev->bus, dev->devfn & 0xff); /* Create PE */ - eeh_add_to_parent_pe(edev); + ret = eeh_add_to_parent_pe(edev); + if (ret) { + pr_warn("%s: Can't add PCI dev %s to parent PE (%d)\n", + __func__, pci_name(dev), ret); + return ret; + } + + /* + * Cache the PE primary bus, which can't be fetched when + * full hotplug is in progress. In that case, all child + * PCI devices of the PE are expected to be removed prior + * to PE reset. + */ + if (!edev->pe->bus) + edev->pe->bus = dev->bus; /* * Enable EEH explicitly so that we will do EEH check diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index de19ede..81f2d3a 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -1142,8 +1142,8 @@ static void pnv_pci_ioda_fixup(void) #ifdef CONFIG_EEH eeh_probe_mode_set(EEH_PROBE_MODE_DEV); - eeh_addr_cache_build(); eeh_init(); + eeh_addr_cache_build(); #endif } -- 1.8.3.2