All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
Date: Sat, 28 Jun 2014 22:45:21 +0200	[thread overview]
Message-ID: <201406282245.21271.marex@denx.de> (raw)
In-Reply-To: <53AF278F.80403@posteo.de>

On Saturday, June 28, 2014 at 10:37:35 PM, J?rg Krause wrote:
> On 06/28/2014 09:59 PM, Marek Vasut wrote:
> > I would actually be really glad if you could test plain u-boot-usb/master
> > and see if your USB problem is present there. Also, it would be really
> > nice to isolate the sequence of commands which triggers the bug, so we
> > have a proper reproducible testcase.
> > 
> > Anyway, this thread is not a place where I would like to discuss this.
> > This should be discussed in the "original" thread, that is:
> > 
> > Subj: [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC
> 
> I cloned u-boot-usb/master and tested it. I am running "tftpd
> rootfs.ubifs" several times. Here is the log (I shortened the loading
> process bar):
[...]
>     => tftp rootfs.ubifs
>     using ci_udc, OUT ep- IN ep- STATUS ep-
>     MAC 00:19:b8:00:00:02
>     HOST MAC 00:19:b8:00:00:01
>     high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet
>     USB network up!
>     Using usb_ether device
>     TFTP from server 10.0.0.1; our IP address is 10.0.0.2
>     Filename 'rootfs.ubifs'.
>     Load address: 0x40008000
>     Loading: [snip]
>       ##############################################################T ###
>           [snip]
>           1.7 MiB/s

Here it's 1.7MB/s ...

>     done
>     Bytes transferred = 13205504 (c98000 hex)
>     => tftp rootfs.ubifs
>     using ci_udc, OUT ep- IN ep- STATUS ep-
>     MAC 00:19:b8:00:00:02
>     HOST MAC 00:19:b8:00:00:01
>     high speed config #1: 2 mA, Ethernet Gadget, using CDC Ethernet
>     USB network up!
>     Using usb_ether device
>     TFTP from server 10.0.0.1; our IP address is 10.0.0.2
>     Filename 'rootfs.ubifs'.
>     Load address: 0x40008000
>     Loading:
>     #################################################################
>           [snip]
>           5.6 MiB/s

... and here it's 5.6 MB/s ... that's weird.

[...]

> The error always appears after calling tftp the third time! The first
> two runs work fine, but the third one always fails. I run this test
> about 20 times.

And finally, what is the contents of 'rootfs.ubifs' ?

Best regards,

  reply	other threads:[~2014-06-28 20:45 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-23 18:02 [U-Boot] [PATCH] usb: ci_udc: fix interaction with CONFIG_USB_ETH_CDC Stephen Warren
2014-06-23 19:03 ` Eric Nelson
2014-06-25 13:51 ` Marek Vasut
2014-06-25 16:06   ` Stephen Warren
2014-06-27 21:37     ` Jörg Krause
2014-06-27 21:52       ` Jörg Krause
2014-06-27 21:56         ` Stephen Warren
2014-06-27 23:27           ` Jörg Krause
2014-06-27 21:55       ` Stephen Warren
2014-06-27 23:16         ` Jörg Krause
2014-06-27 23:37           ` Stephen Warren
2014-06-28  0:09             ` Jörg Krause
2014-06-28  1:34             ` Jörg Krause
2014-06-28 20:37               ` Jörg Krause
2014-06-28 20:45                 ` Marek Vasut [this message]
2014-06-28 20:53                   ` Jörg Krause
2014-06-29 20:33                     ` Jörg Krause
2014-06-30  9:37                       ` Marek Vasut
2014-06-30 13:34                         ` Jörg Krause
2014-06-30 16:02               ` Stephen Warren
2014-06-30 19:55                 ` Stephen Warren
2014-06-30 22:44                   ` Jörg Krause
2014-06-30 22:51                     ` Stephen Warren
2014-06-30 23:17                       ` Jörg Krause
2014-06-30 23:56                         ` Marek Vasut
2014-06-30 20:55                 ` Jörg Krause
2014-06-30 21:15                   ` Marek Vasut
2014-06-30 21:43                     ` Jörg Krause
2014-06-30 21:50                       ` Marek Vasut
2014-06-25 20:20 ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201406282245.21271.marex@denx.de \
    --to=marex@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.