From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Sun, 3 Aug 2014 15:48:20 +0200 Subject: [U-Boot] [PATCH 05/18] compulab: eeprom: add support for defining eeprom i2c bus In-Reply-To: <1407051288-17324-6-git-send-email-nikita@compulab.co.il> References: <1407051288-17324-1-git-send-email-nikita@compulab.co.il> <1407051288-17324-6-git-send-email-nikita@compulab.co.il> Message-ID: <201408031548.20247.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Sunday, August 03, 2014 at 09:34:35 AM, Nikita Kiryanov wrote: > Create CONFIG_SYS_I2C_EEPROM_BUS #define to tell the EEPROM > module what I2C bus the EEPROM is located at. Make cl_eeprom_read() > switch to that bus when reading EEPROM. > > Cc: Igor Grinberg > Cc: Dmitry Lifshitz > Cc: Tom Rini > Acked-by: Igor Grinberg > Acked-by: Dmitry Lifshitz > Signed-off-by: Nikita Kiryanov > --- > board/compulab/common/eeprom.c | 10 +++++++++- > include/configs/cm_t335.h | 1 + > include/configs/cm_t35.h | 1 + > include/configs/cm_t54.h | 1 + > 4 files changed, 12 insertions(+), 1 deletion(-) > > diff --git a/board/compulab/common/eeprom.c > b/board/compulab/common/eeprom.c index 20fe3e1..b5c1c2a 100644 > --- a/board/compulab/common/eeprom.c > +++ b/board/compulab/common/eeprom.c > @@ -31,8 +31,16 @@ static int cl_eeprom_layout; /* Implicitly > LAYOUT_INVALID */ > > static int cl_eeprom_read(uint offset, uchar *buf, int len) > { > - return i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, offset, > + int res; > + unsigned int current_i2c_bus = i2c_get_bus_num(); > + > + i2c_set_bus_num(CONFIG_SYS_I2C_EEPROM_BUS); Please handle the return value of this function too. [...] BR,MV