Hi,

On Thu, Aug 07, 2014 at 10:21:23PM +0000, Paul Walmsley wrote:
> On Fri, 1 Aug 2014, Tony Lindgren wrote:
> 
> > * Paul Walmsley <paul@pwsan.com> [140731 12:29]:
> > > On Thu, 31 Jul 2014, Tony Lindgren wrote:
> > > 
> > > > * Paul Walmsley <paul@pwsan.com> [140730 00:55]:
> > > > > On Tue, 29 Jul 2014, Tony Lindgren wrote:
> > > > > 
> > > > > > The following patch should fix the tests above for 3530es3beagle.
> > > > > > Care to test and ack as I don't have one?
> > > > > 
> > > > > 3530es3beagle retention dynamic idle tests hang on next-20140729.  (Maybe 
> > > > > other boards fail too - haven't tested any others).  
> > > > 
> > > > I just checked that today's linux next works for off-idle and
> > > > wake-up events for at least 37xx evm.
> > > 
> > > I ran the full set of tests across all boards.  The only board that passed 
> > > the dynamic idle testing on next-20140729 was the 3730beaglexm.
> > > 
> > > http://www.pwsan.com/omap/testlogs/next_20140729/20140730124836/README.txt
> > > 
> > > 37xxevm hangs on the first suspend entry:
> > > 
> > > http://www.pwsan.com/omap/testlogs/next_20140729/20140730124836/pm/37xxevm/37xxevm_log.txt
> > > 
> > > If I find some extra time, I'll set up a bisection run.
> > 
> > OK that sounds like some driver suspend regression that needs
> > to be tracked down. I'm seeing it on my 37xx evm also with
> > linux next too.
> 
> It's commit a71e3c37960ce5f9c6a519bc1215e3ba9fa83e75:
> 
> Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
> Date:   Wed Jul 23 16:47:31 2014 -0300
> 
>     net: phy: Set the driver when registering an MDIO bus device
>     
>     mdiobus_register() registers a device which is already bound to a driver.
>     Hence, the driver pointer should be set properly in order to track down
>     the driver associated to the MDIO bus.
>     
>     This will be used to allow ethernet driver to pin down a MDIO bus driver,
>     preventing it from being unloaded while the PHY device is running.
>     
>     Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
>     Tested-by: Florian Fainelli <f.fainelli@gmail.com>
>     Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
>     Signed-off-by: David S. Miller <davem@davemloft.net>
> 
> 
> What's bad is that this went in late during v3.16-rc fixes.  So now v3.16 
> itself is broken, and there's no way to fix it.

we have stable releases for that.

-- 
balbi