From: Kalle Valo <kvalo@qca.qualcomm.com>
To: <ath10k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>
Subject: [PATCH v2 3/8] ath10k: print ath10k wmi op version
Date: Wed, 17 Dec 2014 12:21:03 +0200 [thread overview]
Message-ID: <20141217102103.15964.40410.stgit@potku.adurom.net> (raw)
In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net>
The internal firmware version doesn't tell much to the user, it's more
informative to use that field to print the wmi op version.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debug.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 70a9599aeb7a..6ca24427e184 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -124,7 +124,7 @@ EXPORT_SYMBOL(ath10k_info);
void ath10k_print_driver_info(struct ath10k *ar)
{
- ath10k_info(ar, "%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d wmi %d.%d.%d.%d cal %s max_sta %d\n",
+ ath10k_info(ar, "%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d wmi %d cal %s max_sta %d\n",
ar->hw_params.name,
ar->target_version,
ar->chip_id,
@@ -132,10 +132,7 @@ void ath10k_print_driver_info(struct ath10k *ar)
ar->fw_api,
ar->htt.target_version_major,
ar->htt.target_version_minor,
- ar->fw_version_major,
- ar->fw_version_minor,
- ar->fw_version_release,
- ar->fw_version_build,
+ ar->wmi.op_version,
ath10k_cal_mode_str(ar->cal_mode),
ar->max_num_stations);
ath10k_info(ar, "debug %d debugfs %d tracing %d dfs %d testmode %d\n",
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v2 3/8] ath10k: print ath10k wmi op version
Date: Wed, 17 Dec 2014 12:21:03 +0200 [thread overview]
Message-ID: <20141217102103.15964.40410.stgit@potku.adurom.net> (raw)
In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net>
The internal firmware version doesn't tell much to the user, it's more
informative to use that field to print the wmi op version.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/debug.c | 7 ++-----
1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 70a9599aeb7a..6ca24427e184 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -124,7 +124,7 @@ EXPORT_SYMBOL(ath10k_info);
void ath10k_print_driver_info(struct ath10k *ar)
{
- ath10k_info(ar, "%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d wmi %d.%d.%d.%d cal %s max_sta %d\n",
+ ath10k_info(ar, "%s (0x%08x, 0x%08x) fw %s api %d htt %d.%d wmi %d cal %s max_sta %d\n",
ar->hw_params.name,
ar->target_version,
ar->chip_id,
@@ -132,10 +132,7 @@ void ath10k_print_driver_info(struct ath10k *ar)
ar->fw_api,
ar->htt.target_version_major,
ar->htt.target_version_minor,
- ar->fw_version_major,
- ar->fw_version_minor,
- ar->fw_version_release,
- ar->fw_version_build,
+ ar->wmi.op_version,
ath10k_cal_mode_str(ar->cal_mode),
ar->max_num_stations);
ath10k_info(ar, "debug %d debugfs %d tracing %d dfs %d testmode %d\n",
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-17 10:21 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-17 10:20 [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo
2014-12-17 10:20 ` Kalle Valo
2014-12-17 10:20 ` [PATCH v2 1/8] ath10k: set max_num_vdevs based on wmi op version Kalle Valo
2014-12-17 10:20 ` Kalle Valo
2014-12-17 10:20 ` [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Kalle Valo
2014-12-17 10:20 ` Kalle Valo
2014-12-17 10:21 ` Kalle Valo [this message]
2014-12-17 10:21 ` [PATCH v2 3/8] ath10k: print ath10k wmi op version Kalle Valo
2014-12-17 10:21 ` [PATCH v2 4/8] ath10k: add 10.2.4 firmware support Kalle Valo
2014-12-17 10:21 ` Kalle Valo
2014-12-17 10:21 ` [PATCH v2 5/8] ath10k: add wmi support for pdev_set_quiet_mode Kalle Valo
2014-12-17 10:21 ` Kalle Valo
2014-12-17 10:22 ` [PATCH v2 6/8] ath10k: add thermal cooling device support Kalle Valo
2014-12-17 10:22 ` Kalle Valo
2014-12-17 10:22 ` [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature Kalle Valo
2014-12-17 10:22 ` Kalle Valo
2014-12-17 10:22 ` [PATCH v2 8/8] ath10k: add thermal sensor device support Kalle Valo
2014-12-17 10:22 ` Kalle Valo
2014-12-17 18:56 ` Sebastian Gottschall
[not found] ` <5491D20F.2020202@dd-wrt.com>
2014-12-23 17:43 ` Kalle Valo
2014-12-23 17:43 ` Kalle Valo
2014-12-23 19:52 ` Sebastian Gottschall
2014-12-23 19:52 ` Sebastian Gottschall
2014-12-23 15:21 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo
2014-12-23 15:21 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141217102103.15964.40410.stgit@potku.adurom.net \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.