From: Kalle Valo <kvalo@qca.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org> Subject: [PATCH v2 8/8] ath10k: add thermal sensor device support Date: Wed, 17 Dec 2014 12:22:26 +0200 [thread overview] Message-ID: <20141217102226.15964.32919.stgit@potku.adurom.net> (raw) In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net> From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 2 + drivers/net/wireless/ath/ath10k/thermal.c | 83 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/thermal.h | 14 +++++ drivers/net/wireless/ath/ath10k/wmi.c | 1 4 files changed, 100 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 28bfacb382f3..7d5a7b3add52 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -847,6 +847,7 @@ static void ath10k_core_restart(struct work_struct *work) complete_all(&ar->offchan_tx_completed); complete_all(&ar->install_key_done); complete_all(&ar->vdev_setup_done); + complete_all(&ar->thermal.wmi_sync); wake_up(&ar->htt.empty_tx_wq); wake_up(&ar->wmi.tx_credits_wq); wake_up(&ar->peer_mapping_wq); @@ -1322,6 +1323,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, init_completion(&ar->install_key_done); init_completion(&ar->vdev_setup_done); + init_completion(&ar->thermal.wmi_sync); INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index e98ce8ce27e2..d93913538d18 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -17,6 +17,8 @@ #include <linux/device.h> #include <linux/sysfs.h> #include <linux/thermal.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> #include "core.h" #include "debug.h" #include "wmi-ops.h" @@ -119,9 +121,72 @@ static struct thermal_cooling_device_ops ath10k_thermal_ops = { .set_cur_state = ath10k_thermal_set_cur_dutycycle, }; +static ssize_t ath10k_thermal_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ath10k *ar = dev_get_drvdata(dev); + int ret, temperature; + + mutex_lock(&ar->conf_mutex); + + /* Can't get temperature when the card is off */ + if (ar->state != ATH10K_STATE_ON) { + ret = -ENETDOWN; + goto out; + } + + reinit_completion(&ar->thermal.wmi_sync); + ret = ath10k_wmi_pdev_get_temperature(ar); + if (ret) { + ath10k_warn(ar, "failed to read temperature %d\n", ret); + goto out; + } + + if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) { + ret = -ESHUTDOWN; + goto out; + } + + ret = wait_for_completion_timeout(&ar->thermal.wmi_sync, + ATH10K_THERMAL_SYNC_TIMEOUT_HZ); + if (ret == 0) { + ath10k_warn(ar, "failed to synchronize thermal read\n"); + ret = -ETIMEDOUT; + goto out; + } + + spin_lock_bh(&ar->data_lock); + temperature = ar->thermal.temperature; + spin_unlock_bh(&ar->data_lock); + + ret = snprintf(buf, PAGE_SIZE, "%d", temperature); +out: + mutex_unlock(&ar->conf_mutex); + return ret; +} + +void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature) +{ + spin_lock_bh(&ar->data_lock); + ar->thermal.temperature = temperature; + spin_unlock_bh(&ar->data_lock); + complete(&ar->thermal.wmi_sync); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ath10k_thermal_show_temp, + NULL, 0); + +static struct attribute *ath10k_hwmon_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ath10k_hwmon); + int ath10k_thermal_register(struct ath10k *ar) { struct thermal_cooling_device *cdev; + struct device *hwmon_dev; int ret; cdev = thermal_cooling_device_register("ath10k_thermal", ar, @@ -141,8 +206,26 @@ int ath10k_thermal_register(struct ath10k *ar) } ar->thermal.cdev = cdev; + + /* Do not register hwmon device when temperature reading is not + * supported by firmware + */ + if (ar->wmi.op_version != ATH10K_FW_WMI_OP_VERSION_10_2_4) + return 0; + + hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, + "ath10k_hwmon", ar, + ath10k_hwmon_groups); + if (IS_ERR(hwmon_dev)) { + ath10k_err(ar, "failed to register hwmon device: %ld\n", + PTR_ERR(hwmon_dev)); + ret = -EINVAL; + goto err_remove_link; + } return 0; +err_remove_link: + sysfs_remove_link(&ar->dev->kobj, "thermal_sensor"); err_cooling_destroy: thermal_cooling_device_unregister(cdev); return ret; diff --git a/drivers/net/wireless/ath/ath10k/thermal.h b/drivers/net/wireless/ath/ath10k/thermal.h index e20bb87849ae..bccc17ae0fde 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.h +++ b/drivers/net/wireless/ath/ath10k/thermal.h @@ -20,17 +20,25 @@ #define ATH10K_QUIET_PERIOD_MIN 25 #define ATH10K_QUIET_START_OFFSET 10 #define ATH10K_QUIET_DUTY_CYCLE_MAX 70 +#define ATH10K_HWMON_NAME_LEN 15 +#define ATH10K_THERMAL_SYNC_TIMEOUT_HZ (5*HZ) struct ath10k_thermal { struct thermal_cooling_device *cdev; + struct completion wmi_sync; /* protected by conf_mutex */ u32 duty_cycle; + /* temperature value in Celcius degree + * protected by data_lock + */ + int temperature; }; #ifdef CONFIG_THERMAL int ath10k_thermal_register(struct ath10k *ar); void ath10k_thermal_unregister(struct ath10k *ar); +void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature); #else static inline int ath10k_thermal_register(struct ath10k *ar) { @@ -40,5 +48,11 @@ static inline int ath10k_thermal_register(struct ath10k *ar) static inline void ath10k_thermal_unregister(struct ath10k *ar) { } + +static inline void ath10k_thermal_event_temperature(struct ath10k *ar, + int temperature) +{ +} + #endif #endif /* _THERMAL_ */ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index c2d7ac31fd78..ac742905331b 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3038,6 +3038,7 @@ static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb) if (WARN_ON(skb->len < sizeof(*ev))) return -EPROTO; + ath10k_thermal_event_temperature(ar, __le32_to_cpu(ev->temperature)); return 0; }
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH v2 8/8] ath10k: add thermal sensor device support Date: Wed, 17 Dec 2014 12:22:26 +0200 [thread overview] Message-ID: <20141217102226.15964.32919.stgit@potku.adurom.net> (raw) In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net> From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Temperature sensor generates electrical analog voltage from temperature of each chain. The analog voltage is converted to digital value through ADC. For reading temperature values fom user space, hw monitoring device is used. Whenever the user requests for current temperature, the driver sends WMI command and wait for response. For reading temperature, cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 2 + drivers/net/wireless/ath/ath10k/thermal.c | 83 +++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/thermal.h | 14 +++++ drivers/net/wireless/ath/ath10k/wmi.c | 1 4 files changed, 100 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 28bfacb382f3..7d5a7b3add52 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -847,6 +847,7 @@ static void ath10k_core_restart(struct work_struct *work) complete_all(&ar->offchan_tx_completed); complete_all(&ar->install_key_done); complete_all(&ar->vdev_setup_done); + complete_all(&ar->thermal.wmi_sync); wake_up(&ar->htt.empty_tx_wq); wake_up(&ar->wmi.tx_credits_wq); wake_up(&ar->peer_mapping_wq); @@ -1322,6 +1323,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev, init_completion(&ar->install_key_done); init_completion(&ar->vdev_setup_done); + init_completion(&ar->thermal.wmi_sync); INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work); diff --git a/drivers/net/wireless/ath/ath10k/thermal.c b/drivers/net/wireless/ath/ath10k/thermal.c index e98ce8ce27e2..d93913538d18 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.c +++ b/drivers/net/wireless/ath/ath10k/thermal.c @@ -17,6 +17,8 @@ #include <linux/device.h> #include <linux/sysfs.h> #include <linux/thermal.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> #include "core.h" #include "debug.h" #include "wmi-ops.h" @@ -119,9 +121,72 @@ static struct thermal_cooling_device_ops ath10k_thermal_ops = { .set_cur_state = ath10k_thermal_set_cur_dutycycle, }; +static ssize_t ath10k_thermal_show_temp(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct ath10k *ar = dev_get_drvdata(dev); + int ret, temperature; + + mutex_lock(&ar->conf_mutex); + + /* Can't get temperature when the card is off */ + if (ar->state != ATH10K_STATE_ON) { + ret = -ENETDOWN; + goto out; + } + + reinit_completion(&ar->thermal.wmi_sync); + ret = ath10k_wmi_pdev_get_temperature(ar); + if (ret) { + ath10k_warn(ar, "failed to read temperature %d\n", ret); + goto out; + } + + if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) { + ret = -ESHUTDOWN; + goto out; + } + + ret = wait_for_completion_timeout(&ar->thermal.wmi_sync, + ATH10K_THERMAL_SYNC_TIMEOUT_HZ); + if (ret == 0) { + ath10k_warn(ar, "failed to synchronize thermal read\n"); + ret = -ETIMEDOUT; + goto out; + } + + spin_lock_bh(&ar->data_lock); + temperature = ar->thermal.temperature; + spin_unlock_bh(&ar->data_lock); + + ret = snprintf(buf, PAGE_SIZE, "%d", temperature); +out: + mutex_unlock(&ar->conf_mutex); + return ret; +} + +void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature) +{ + spin_lock_bh(&ar->data_lock); + ar->thermal.temperature = temperature; + spin_unlock_bh(&ar->data_lock); + complete(&ar->thermal.wmi_sync); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ath10k_thermal_show_temp, + NULL, 0); + +static struct attribute *ath10k_hwmon_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL, +}; +ATTRIBUTE_GROUPS(ath10k_hwmon); + int ath10k_thermal_register(struct ath10k *ar) { struct thermal_cooling_device *cdev; + struct device *hwmon_dev; int ret; cdev = thermal_cooling_device_register("ath10k_thermal", ar, @@ -141,8 +206,26 @@ int ath10k_thermal_register(struct ath10k *ar) } ar->thermal.cdev = cdev; + + /* Do not register hwmon device when temperature reading is not + * supported by firmware + */ + if (ar->wmi.op_version != ATH10K_FW_WMI_OP_VERSION_10_2_4) + return 0; + + hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, + "ath10k_hwmon", ar, + ath10k_hwmon_groups); + if (IS_ERR(hwmon_dev)) { + ath10k_err(ar, "failed to register hwmon device: %ld\n", + PTR_ERR(hwmon_dev)); + ret = -EINVAL; + goto err_remove_link; + } return 0; +err_remove_link: + sysfs_remove_link(&ar->dev->kobj, "thermal_sensor"); err_cooling_destroy: thermal_cooling_device_unregister(cdev); return ret; diff --git a/drivers/net/wireless/ath/ath10k/thermal.h b/drivers/net/wireless/ath/ath10k/thermal.h index e20bb87849ae..bccc17ae0fde 100644 --- a/drivers/net/wireless/ath/ath10k/thermal.h +++ b/drivers/net/wireless/ath/ath10k/thermal.h @@ -20,17 +20,25 @@ #define ATH10K_QUIET_PERIOD_MIN 25 #define ATH10K_QUIET_START_OFFSET 10 #define ATH10K_QUIET_DUTY_CYCLE_MAX 70 +#define ATH10K_HWMON_NAME_LEN 15 +#define ATH10K_THERMAL_SYNC_TIMEOUT_HZ (5*HZ) struct ath10k_thermal { struct thermal_cooling_device *cdev; + struct completion wmi_sync; /* protected by conf_mutex */ u32 duty_cycle; + /* temperature value in Celcius degree + * protected by data_lock + */ + int temperature; }; #ifdef CONFIG_THERMAL int ath10k_thermal_register(struct ath10k *ar); void ath10k_thermal_unregister(struct ath10k *ar); +void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature); #else static inline int ath10k_thermal_register(struct ath10k *ar) { @@ -40,5 +48,11 @@ static inline int ath10k_thermal_register(struct ath10k *ar) static inline void ath10k_thermal_unregister(struct ath10k *ar) { } + +static inline void ath10k_thermal_event_temperature(struct ath10k *ar, + int temperature) +{ +} + #endif #endif /* _THERMAL_ */ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index c2d7ac31fd78..ac742905331b 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3038,6 +3038,7 @@ static int ath10k_wmi_event_temperature(struct ath10k *ar, struct sk_buff *skb) if (WARN_ON(skb->len < sizeof(*ev))) return -EPROTO; + ath10k_thermal_event_temperature(ar, __le32_to_cpu(ev->temperature)); return 0; } _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-17 10:22 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-17 10:20 [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:20 ` [PATCH v2 1/8] ath10k: set max_num_vdevs based on wmi op version Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:20 ` [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 3/8] ath10k: print ath10k wmi op version Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 4/8] ath10k: add 10.2.4 firmware support Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 5/8] ath10k: add wmi support for pdev_set_quiet_mode Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 6/8] ath10k: add thermal cooling device support Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 10:22 ` Kalle Valo [this message] 2014-12-17 10:22 ` [PATCH v2 8/8] ath10k: add thermal sensor device support Kalle Valo 2014-12-17 18:56 ` Sebastian Gottschall [not found] ` <5491D20F.2020202@dd-wrt.com> 2014-12-23 17:43 ` Kalle Valo 2014-12-23 17:43 ` Kalle Valo 2014-12-23 19:52 ` Sebastian Gottschall 2014-12-23 19:52 ` Sebastian Gottschall 2014-12-23 15:21 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo 2014-12-23 15:21 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20141217102226.15964.32919.stgit@potku.adurom.net \ --to=kvalo@qca.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.