All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andri Yngvason <andri.yngvason@marel.com>
To: "Ahmed S. Darwish" <darwish.07@gmail.com>,
	Olivier Sobrie <olivier@sobrie.be>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Wolfgang Grandegger <wg@grandegger.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Linux-CAN <linux-can@vger.kernel.org>,
	netdev <netdev@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling
Date: Wed, 21 Jan 2015 10:33:19 +0000	[thread overview]
Message-ID: <20150121103319.14511.57709@shannon> (raw)
In-Reply-To: <20150120214537.GB16828@linux>

Quoting Ahmed S. Darwish (2015-01-20 21:45:37)
> From: Ahmed S. Darwish <ahmed.darwish@valeo.com>
> 
> Replace most of the can interface's state and error counters
> handling with the new can-dev can_change_state() mechanism.
> 
> Suggested-by: Andri Yngvason <andri.yngvason@marel.com>
> Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
> ---
>  drivers/net/can/usb/kvaser_usb.c | 114 +++++++++++++++++++--------------------
>  1 file changed, 55 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
> index 971c5f9..0386d3f 100644
> --- a/drivers/net/can/usb/kvaser_usb.c
> +++ b/drivers/net/can/usb/kvaser_usb.c
> @@ -620,40 +620,43 @@ static void kvaser_usb_unlink_tx_urbs(struct kvaser_usb_net_priv *priv)
>  }
>  
>  static void kvaser_usb_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
> -                                                const struct kvaser_usb_error_summary *es)
> +                                                const struct kvaser_usb_error_summary *es,
> +                                                struct can_frame *cf)
>  {
>         struct net_device_stats *stats;
> -       enum can_state new_state;
> -
> -       stats = &priv->netdev->stats;
> -       new_state = priv->can.state;
> +       enum can_state cur_state, new_state, tx_state, rx_state;
>  
>         netdev_dbg(priv->netdev, "Error status: 0x%02x\n", es->status);
>  
> -       if (es->status & M16C_STATE_BUS_OFF) {
> -               priv->can.can_stats.bus_off++;
> +       stats = &priv->netdev->stats;
> +       new_state = cur_state = priv->can.state;
> +
> +       if (es->status & M16C_STATE_BUS_OFF)
>                 new_state = CAN_STATE_BUS_OFF;
> -       } else if (es->status & M16C_STATE_BUS_PASSIVE) {
> -               if (priv->can.state != CAN_STATE_ERROR_PASSIVE)
> -                       priv->can.can_stats.error_passive++;
> +       else if (es->status & M16C_STATE_BUS_PASSIVE)
>                 new_state = CAN_STATE_ERROR_PASSIVE;
> -       }
>  
>         if (es->status == M16C_STATE_BUS_ERROR) {
> -               if ((priv->can.state < CAN_STATE_ERROR_WARNING) &&
> -                   ((es->txerr >= 96) || (es->rxerr >= 96))) {
> -                       priv->can.can_stats.error_warning++;
> +               if ((cur_state < CAN_STATE_ERROR_WARNING) &&
> +                   ((es->txerr >= 96) || (es->rxerr >= 96)))
>                         new_state = CAN_STATE_ERROR_WARNING;
> -               } else if (priv->can.state > CAN_STATE_ERROR_ACTIVE) {
> +               else if (cur_state > CAN_STATE_ERROR_ACTIVE)
>                         new_state = CAN_STATE_ERROR_ACTIVE;
> -               }
>         }
>  
>         if (!es->status)
>                 new_state = CAN_STATE_ERROR_ACTIVE;
>  
> +       if (new_state != cur_state) {
> +               tx_state = (es->txerr >= es->rxerr) ? new_state : 0;
> +               rx_state = (es->txerr <= es->rxerr) ? new_state : 0;
> +
> +               can_change_state(priv->netdev, cf, tx_state, rx_state);
> +               new_state = priv->can.state;
> +       }
> +
>         if (priv->can.restart_ms &&
> -           (priv->can.state >= CAN_STATE_BUS_OFF) &&
> +           (cur_state >= CAN_STATE_BUS_OFF) &&
>             (new_state < CAN_STATE_BUS_OFF)) {
>                 priv->can.can_stats.restarts++;
>         }
> @@ -665,18 +668,17 @@ static void kvaser_usb_rx_error_update_can_state(struct kvaser_usb_net_priv *pri
>  
>         priv->bec.txerr = es->txerr;
>         priv->bec.rxerr = es->rxerr;
> -       priv->can.state = new_state;
>  }
>  
>  static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
>                                 const struct kvaser_msg *msg)
>  {
> -       struct can_frame *cf;
> +       struct can_frame *cf, tmp_cf = { .can_id = CAN_ERR_FLAG, .can_dlc = CAN_ERR_DLC };
>         struct sk_buff *skb;
>         struct net_device_stats *stats;
>         struct kvaser_usb_net_priv *priv;
>         struct kvaser_usb_error_summary es = { };
> -       enum can_state old_state;
> +       enum can_state old_state, new_state;
>  
>         switch (msg->id) {
>         case CMD_CAN_ERROR_EVENT:
> @@ -721,60 +723,54 @@ static void kvaser_usb_rx_error(const struct kvaser_usb *dev,
>         }
>  
>         /* Update all of the can interface's state and error counters before
> -        * trying any skb allocation that can actually fail with -ENOMEM.
> +        * trying any memory allocation that can actually fail with -ENOMEM.
> +        *
> +        * We send a temporary stack-allocated error can frame to
> +        * can_change_state() for the very same reason.
> +        *
> +        * TODO: Split can_change_state() responsibility between updating the
> +        * can interface's state and counters, and the setting up of can error
> +        * frame ID and data to userspace. Remove stack allocation afterwards.
>          */
>         old_state = priv->can.state;
> -       kvaser_usb_rx_error_update_can_state(priv, &es);
> +       kvaser_usb_rx_error_update_can_state(priv, &es, &tmp_cf);
> +       new_state = priv->can.state;
>  
>         skb = alloc_can_err_skb(priv->netdev, &cf);
>         if (!skb) {
>                 stats->rx_dropped++;
>                 return;
>         }
> +       memcpy(cf, &tmp_cf, sizeof(*cf));
>  
> -       if (es.status & M16C_STATE_BUS_OFF) {
> -               cf->can_id |= CAN_ERR_BUSOFF;
> -
> -               if (!priv->can.restart_ms)
> -                       kvaser_usb_simple_msg_async(priv, CMD_STOP_CHIP);
> -               netif_carrier_off(priv->netdev);
> -       } else if (es.status & M16C_STATE_BUS_PASSIVE) {
> -               if (old_state != CAN_STATE_ERROR_PASSIVE) {
> -                       cf->can_id |= CAN_ERR_CRTL;
> -
> -                       if (es.txerr || es.rxerr)
> -                               cf->data[1] = (es.txerr > es.rxerr)
> -                                               ? CAN_ERR_CRTL_TX_PASSIVE
> -                                               : CAN_ERR_CRTL_RX_PASSIVE;
> -                       else
> -                               cf->data[1] = CAN_ERR_CRTL_TX_PASSIVE |
> -                                             CAN_ERR_CRTL_RX_PASSIVE;
> +       if (new_state != old_state) {
> +               if (es.status & M16C_STATE_BUS_OFF) {
> +                       if (!priv->can.restart_ms)
> +                               kvaser_usb_simple_msg_async(priv, CMD_STOP_CHIP);
> +                       netif_carrier_off(priv->netdev);
> +               }
> +
> +               if (es.status == M16C_STATE_BUS_ERROR) {
> +                       if ((old_state >= CAN_STATE_ERROR_WARNING) ||
> +                           (es.txerr < 96 && es.rxerr < 96)) {
> +                               if (old_state > CAN_STATE_ERROR_ACTIVE) {
> +                                       cf->can_id |= CAN_ERR_PROT;
> +                                       cf->data[2] = CAN_ERR_PROT_ACTIVE;
> +                               }
> +                       }
>                 }
> -       }
>  
> -       if (es.status == M16C_STATE_BUS_ERROR) {
> -               if ((old_state < CAN_STATE_ERROR_WARNING) &&
> -                   ((es.txerr >= 96) || (es.rxerr >= 96))) {
> -                       cf->can_id |= CAN_ERR_CRTL;
> -                       cf->data[1] = (es.txerr > es.rxerr)
> -                                       ? CAN_ERR_CRTL_TX_WARNING
> -                                       : CAN_ERR_CRTL_RX_WARNING;
> -               } else if (old_state > CAN_STATE_ERROR_ACTIVE) {
> +               if (!es.status) {
>                         cf->can_id |= CAN_ERR_PROT;
>                         cf->data[2] = CAN_ERR_PROT_ACTIVE;
>                 }
> -       }
>  
> -       if (!es.status) {
> -               cf->can_id |= CAN_ERR_PROT;
> -               cf->data[2] = CAN_ERR_PROT_ACTIVE;
> -       }
> -
> -       if (priv->can.restart_ms &&
> -           (old_state >= CAN_STATE_BUS_OFF) &&
> -           (priv->can.state < CAN_STATE_BUS_OFF)) {
> -               cf->can_id |= CAN_ERR_RESTARTED;
> -               netif_carrier_on(priv->netdev);
> +               if (priv->can.restart_ms &&
> +                   (old_state >= CAN_STATE_BUS_OFF) &&
> +                   (new_state < CAN_STATE_BUS_OFF)) {
> +                       cf->can_id |= CAN_ERR_RESTARTED;
> +                       netif_carrier_on(priv->netdev);
> +               }
>         }
>  
>         if (es.error_factor) {
> -- 
> 1.9.1

Looks good.

--
Andri

  parent reply	other threads:[~2015-01-21 10:33 UTC|newest]

Thread overview: 98+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36   ` Olivier Sobrie
2014-12-24 15:04     ` Ahmed S. Darwish
2014-12-28 21:51       ` Olivier Sobrie
2014-12-30 15:33         ` Ahmed S. Darwish
2014-12-31 12:13           ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52   ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59   ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25  0:02     ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25  0:04       ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54       ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25  2:50   ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25  9:38     ` Ahmed S. Darwish
2014-12-28 21:52   ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34   ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52   ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57     ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31       ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53         ` Marc Kleine-Budde
2015-01-08 15:19           ` Ahmed S. Darwish
2015-01-12 11:51             ` Marc Kleine-Budde
2015-01-12 12:26               ` Ahmed S. Darwish
2015-01-12 12:34                 ` Marc Kleine-Budde
2015-01-09  3:06           ` Ahmed S. Darwish
2015-01-09 14:05             ` Marc Kleine-Budde
2015-01-09 16:23               ` Oliver Hartkopp
2015-01-08  9:59   ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11   ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15     ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36       ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45         ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51           ` Marc Kleine-Budde
2015-01-12 10:14             ` Ahmed S. Darwish
2015-01-12 10:25               ` Marc Kleine-Budde
2015-01-12 13:33               ` Olivier Sobrie
2015-01-12 13:50                 ` Ahmed S. Darwish
2015-01-12 11:20         ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43         ` Marc Kleine-Budde
2015-01-12 12:07           ` Ahmed S. Darwish
2015-01-12 12:36             ` Ahmed S. Darwish
2015-01-12 13:53         ` Olivier Sobrie
2015-01-18 20:12           ` Ahmed S. Darwish
2015-01-18 20:13             ` Marc Kleine-Budde
2015-01-12 11:09       ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36         ` Ahmed S. Darwish
2015-01-16 14:39           ` Marc Kleine-Budde
2015-01-16 15:50           ` Andri Yngvason
2015-01-18 20:33             ` Ahmed S. Darwish
2015-01-11 20:49     ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05       ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45   ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47     ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48       ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50         ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24         ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59           ` Ahmed S. Darwish
2015-01-21 10:33     ` Andri Yngvason [this message]
2015-01-21 10:44       ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Marc Kleine-Budde
2015-01-21 11:00         ` Andri Yngvason
2015-01-21 11:53       ` Wolfgang Grandegger
2015-01-21 14:43         ` Ahmed S. Darwish
2015-01-21 15:00           ` Andri Yngvason
2015-01-21 15:36             ` Ahmed S. Darwish
2015-01-21 16:13               ` Wolfgang Grandegger
2015-01-23  6:07                 ` Ahmed S. Darwish
2015-01-23 10:32                   ` Andri Yngvason
2015-01-25  2:43                     ` Ahmed S. Darwish
2015-01-26 10:21                       ` Andri Yngvason
2015-01-21 16:37               ` Andri Yngvason
2015-01-21 16:20     ` Andri Yngvason
2015-01-21 22:59       ` Marc Kleine-Budde
2015-01-22 10:14         ` Andri Yngvason
2015-01-25  2:49           ` Ahmed S. Darwish
2015-01-25  3:21       ` Ahmed S. Darwish
2015-01-26  5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26  5:20   ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26  5:22     ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26  5:24       ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26  5:25         ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26  5:27           ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26  5:29             ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26  5:33               ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34                 ` Andri Yngvason
2015-01-26 10:26               ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28             ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50               ` Marc Kleine-Budde
2015-01-26 10:52                 ` Andri Yngvason
2015-01-26 10:53                   ` Marc Kleine-Budde
2015-01-26  9:55   ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07   ` Marc Kleine-Budde
2015-01-26 10:56     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150121103319.14511.57709@shannon \
    --to=andri.yngvason@marel.com \
    --cc=darwish.07@gmail.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=olivier@sobrie.be \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.