From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Thu, 22 Jan 2015 20:16:40 +0100 From: Gilles Chanteperdrix Message-ID: <20150122191640.GC29604@hermes.click-hack.org> References: <1537147.Wm9AbiuW5D@soho> <2296691.2JpS0rAJbA@soho> <20150122114038.GE23461@hermes.click-hack.org> <4743020.6q5RsBy8Ia@soho> <54C0F262.6010806@siemens.com> <20150122144930.GL30245@csclub.uwaterloo.ca> <20150122145624.GF26731@hermes.click-hack.org> <20150122172142.GM30245@csclub.uwaterloo.ca> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20150122172142.GM30245@csclub.uwaterloo.ca> Subject: Re: [Xenomai] Xenomai-3 creating debian packages List-Id: Discussions about the Xenomai project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Lennart Sorensen Cc: Jan Kiszka , xenomai@xenomai.org On Thu, Jan 22, 2015 at 12:21:43PM -0500, Lennart Sorensen wrote: > On Thu, Jan 22, 2015 at 03:56:24PM +0100, Gilles Chanteperdrix wrote: > > Unfortunately not, if you want to work with the I-pipe git, you can > > not run prepare-kernel.sh in that directory anyway, otherwise you > > could end-up commiting the Xenomai fragments with the I-pipe kernel. > > I meant as far as patches going from the ipipe and xenomai git trees > into my kernel tree for the end product. > > As far as developing xenomai and ipipe, it very well might not be > solving anything. I don't do that, so I wouldn't know. Then I can tell you, using one I-pipe tree and one Xenomai tree for multiple architectures has been possible for years, this is how I develop on Xenomai. -- Gilles.