* [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
@ 2015-01-22 2:25 ` Simon Horman
0 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2015-01-22 2:25 UTC (permalink / raw)
To: linux-arm-kernel
* Correct base address of SD3 div6 clk.
* Update div6 labels and MSTP output names
There appears to have been some inconsistency and confusion here as on
the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
This has no run-time affect as the clock nodes are not currently used.
Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
* A similar change to update the div6 clock node names and labels,
and the MSTP clock output-names is required for the r8a7791.
The base addresses appear to be correct there.
---
arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8f78da5..b98534e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -294,16 +294,16 @@
"lb", "qspi", "sdh", "sd0", "z";
};
/* Variable factor clocks */
- sd1_clk: sd2_clk@e6150078 {
+ sd2_clk: sd2_clk@e6150078 {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150078 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd1";
};
- sd2_clk: sd3_clk@e615007c {
+ sd3_clk: sd3_clk@e615026c {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615007c 0 4>;
+ reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd2";
@@ -518,7 +518,7 @@
mstp3_clks: mstp3_clks@e615013c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+ clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
<&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
@@ -527,7 +527,7 @@
R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>;
clock-output-names - "sdhi2", "sdhi1", "sdhi0",
+ "sdhi3", "sdhi2", "sdhi0",
"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
};
mstp7_clks: mstp7_clks@e615014c {
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
@ 2015-01-22 2:25 ` Simon Horman
0 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2015-01-22 2:25 UTC (permalink / raw)
To: linux-arm-kernel
* Correct base address of SD3 div6 clk.
* Update div6 labels and MSTP output names
There appears to have been some inconsistency and confusion here as on
the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
This has no run-time affect as the clock nodes are not currently used.
Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
* A similar change to update the div6 clock node names and labels,
and the MSTP clock output-names is required for the r8a7791.
The base addresses appear to be correct there.
---
arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 8f78da5..b98534e 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -294,16 +294,16 @@
"lb", "qspi", "sdh", "sd0", "z";
};
/* Variable factor clocks */
- sd1_clk: sd2_clk at e6150078 {
+ sd2_clk: sd2_clk at e6150078 {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe6150078 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd1";
};
- sd2_clk: sd3_clk at e615007c {
+ sd3_clk: sd3_clk at e615026c {
compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615007c 0 4>;
+ reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd2";
@@ -518,7 +518,7 @@
mstp3_clks: mstp3_clks at e615013c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
- clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
+ clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
<&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
clock-indices = <
@@ -527,7 +527,7 @@
R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>;
clock-output-names =
- "sdhi2", "sdhi1", "sdhi0",
+ "sdhi3", "sdhi2", "sdhi0",
"mmcif0", "cmt1", "usbdmac0", "usbdmac1";
};
mstp7_clks: mstp7_clks at e615014c {
--
2.1.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
2015-01-22 2:25 ` Simon Horman
@ 2015-01-27 0:59 ` Simon Horman
-1 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2015-01-27 0:59 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 22, 2015 at 11:25:59AM +0900, Simon Horman wrote:
> * Correct base address of SD3 div6 clk.
> * Update div6 labels and MSTP output names
> There appears to have been some inconsistency and confusion here as on
> the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
> the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
>
> This has no run-time affect as the clock nodes are not currently used.
>
> Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert,
could you find a moment to look over this.
Its a follow-up to an earlier patch which you gave me some
feedback on.
>
> ---
> * A similar change to update the div6 clock node names and labels,
> and the MSTP clock output-names is required for the r8a7791.
> The base addresses appear to be correct there.
> ---
> arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> index 8f78da5..b98534e 100644
> --- a/arch/arm/boot/dts/r8a7794.dtsi
> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> @@ -294,16 +294,16 @@
> "lb", "qspi", "sdh", "sd0", "z";
> };
> /* Variable factor clocks */
> - sd1_clk: sd2_clk@e6150078 {
> + sd2_clk: sd2_clk@e6150078 {
> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> reg = <0 0xe6150078 0 4>;
> clocks = <&pll1_div2_clk>;
> #clock-cells = <0>;
> clock-output-names = "sd1";
> };
> - sd2_clk: sd3_clk@e615007c {
> + sd3_clk: sd3_clk@e615026c {
> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> - reg = <0 0xe615007c 0 4>;
> + reg = <0 0xe615026c 0 4>;
> clocks = <&pll1_div2_clk>;
> #clock-cells = <0>;
> clock-output-names = "sd2";
> @@ -518,7 +518,7 @@
> mstp3_clks: mstp3_clks@e615013c {
> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
> - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
> #clock-cells = <1>;
> clock-indices = <
> @@ -527,7 +527,7 @@
> R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
> >;
> clock-output-names > - "sdhi2", "sdhi1", "sdhi0",
> + "sdhi3", "sdhi2", "sdhi0",
> "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
> };
> mstp7_clks: mstp7_clks@e615014c {
> --
> 2.1.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
@ 2015-01-27 0:59 ` Simon Horman
0 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2015-01-27 0:59 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Jan 22, 2015 at 11:25:59AM +0900, Simon Horman wrote:
> * Correct base address of SD3 div6 clk.
> * Update div6 labels and MSTP output names
> There appears to have been some inconsistency and confusion here as on
> the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
> the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
>
> This has no run-time affect as the clock nodes are not currently used.
>
> Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Geert,
could you find a moment to look over this.
Its a follow-up to an earlier patch which you gave me some
feedback on.
>
> ---
> * A similar change to update the div6 clock node names and labels,
> and the MSTP clock output-names is required for the r8a7791.
> The base addresses appear to be correct there.
> ---
> arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> index 8f78da5..b98534e 100644
> --- a/arch/arm/boot/dts/r8a7794.dtsi
> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> @@ -294,16 +294,16 @@
> "lb", "qspi", "sdh", "sd0", "z";
> };
> /* Variable factor clocks */
> - sd1_clk: sd2_clk at e6150078 {
> + sd2_clk: sd2_clk at e6150078 {
> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> reg = <0 0xe6150078 0 4>;
> clocks = <&pll1_div2_clk>;
> #clock-cells = <0>;
> clock-output-names = "sd1";
> };
> - sd2_clk: sd3_clk at e615007c {
> + sd3_clk: sd3_clk at e615026c {
> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> - reg = <0 0xe615007c 0 4>;
> + reg = <0 0xe615026c 0 4>;
> clocks = <&pll1_div2_clk>;
> #clock-cells = <0>;
> clock-output-names = "sd2";
> @@ -518,7 +518,7 @@
> mstp3_clks: mstp3_clks at e615013c {
> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
> - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
> #clock-cells = <1>;
> clock-indices = <
> @@ -527,7 +527,7 @@
> R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
> >;
> clock-output-names =
> - "sdhi2", "sdhi1", "sdhi0",
> + "sdhi3", "sdhi2", "sdhi0",
> "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
> };
> mstp7_clks: mstp7_clks at e615014c {
> --
> 2.1.4
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
2015-01-27 0:59 ` Simon Horman
@ 2015-01-27 8:48 ` Geert Uytterhoeven
-1 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2015-01-27 8:48 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Tue, Jan 27, 2015 at 1:59 AM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Jan 22, 2015 at 11:25:59AM +0900, Simon Horman wrote:
>> * Correct base address of SD3 div6 clk.
>> * Update div6 labels and MSTP output names
>> There appears to have been some inconsistency and confusion here as on
>> the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
>> the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
>>
>> This has no run-time affect as the clock nodes are not currently used.
>>
>> Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
>> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
>> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> Geert,
>
> could you find a moment to look over this.
> Its a follow-up to an earlier patch which you gave me some
> feedback on.
Sorry, it fell through the cracks.
>> ---
>> * A similar change to update the div6 clock node names and labels,
>> and the MSTP clock output-names is required for the r8a7791.
>> The base addresses appear to be correct there.
>> ---
>> arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
>> index 8f78da5..b98534e 100644
>> --- a/arch/arm/boot/dts/r8a7794.dtsi
>> +++ b/arch/arm/boot/dts/r8a7794.dtsi
>> @@ -294,16 +294,16 @@
>> "lb", "qspi", "sdh", "sd0", "z";
>> };
>> /* Variable factor clocks */
>> - sd1_clk: sd2_clk@e6150078 {
>> + sd2_clk: sd2_clk@e6150078 {
>> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
>> reg = <0 0xe6150078 0 4>;
>> clocks = <&pll1_div2_clk>;
>> #clock-cells = <0>;
>> clock-output-names = "sd1";
I think these should be "sd2"...
>> };
>> - sd2_clk: sd3_clk@e615007c {
>> + sd3_clk: sd3_clk@e615026c {
>> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
>> - reg = <0 0xe615007c 0 4>;
>> + reg = <0 0xe615026c 0 4>;
>> clocks = <&pll1_div2_clk>;
>> #clock-cells = <0>;
>> clock-output-names = "sd2";
... and "sd3", as they refer to the clock signals from the clock generator,
and thus should match the register and label names.
(Note: The (old) R-Car E2 v0.1 datasheet does call them SD1 and SD2 :-(
>> @@ -518,7 +518,7 @@
>> mstp3_clks: mstp3_clks@e615013c {
>> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
>> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
>> - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
>> + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
>> <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
>> #clock-cells = <1>;
>> clock-indices = <
>> @@ -527,7 +527,7 @@
>> R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>> >;
>> clock-output-names >> - "sdhi2", "sdhi1", "sdhi0",
>> + "sdhi3", "sdhi2", "sdhi0",
These are disputable: the MSTP docs indeed call them SDHI3, SDHI2, and
SDHI0 (in the latest R-Car Gen2 family datasheet revision).
But for all(?) other MSTP clocks they match the actual module instances
that are driven by the clocks.
So I think these should stay "sdhi2", "sdhi1", and "sdhi0", as they refer to
the SDHI instances, not the parent clocks.
At least we should be consistent with the R8A7794_CLK_SDHIx indices,
which are 2, 1, and 0, not 3, 2, 0.
>> "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
>> };
>> mstp7_clks: mstp7_clks@e615014c {
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
@ 2015-01-27 8:48 ` Geert Uytterhoeven
0 siblings, 0 replies; 8+ messages in thread
From: Geert Uytterhoeven @ 2015-01-27 8:48 UTC (permalink / raw)
To: linux-arm-kernel
Hi Simon,
On Tue, Jan 27, 2015 at 1:59 AM, Simon Horman <horms@verge.net.au> wrote:
> On Thu, Jan 22, 2015 at 11:25:59AM +0900, Simon Horman wrote:
>> * Correct base address of SD3 div6 clk.
>> * Update div6 labels and MSTP output names
>> There appears to have been some inconsistency and confusion here as on
>> the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
>> the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
>>
>> This has no run-time affect as the clock nodes are not currently used.
>>
>> Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
>> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
>> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
>
> Geert,
>
> could you find a moment to look over this.
> Its a follow-up to an earlier patch which you gave me some
> feedback on.
Sorry, it fell through the cracks.
>> ---
>> * A similar change to update the div6 clock node names and labels,
>> and the MSTP clock output-names is required for the r8a7791.
>> The base addresses appear to be correct there.
>> ---
>> arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
>> index 8f78da5..b98534e 100644
>> --- a/arch/arm/boot/dts/r8a7794.dtsi
>> +++ b/arch/arm/boot/dts/r8a7794.dtsi
>> @@ -294,16 +294,16 @@
>> "lb", "qspi", "sdh", "sd0", "z";
>> };
>> /* Variable factor clocks */
>> - sd1_clk: sd2_clk at e6150078 {
>> + sd2_clk: sd2_clk at e6150078 {
>> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
>> reg = <0 0xe6150078 0 4>;
>> clocks = <&pll1_div2_clk>;
>> #clock-cells = <0>;
>> clock-output-names = "sd1";
I think these should be "sd2"...
>> };
>> - sd2_clk: sd3_clk at e615007c {
>> + sd3_clk: sd3_clk at e615026c {
>> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
>> - reg = <0 0xe615007c 0 4>;
>> + reg = <0 0xe615026c 0 4>;
>> clocks = <&pll1_div2_clk>;
>> #clock-cells = <0>;
>> clock-output-names = "sd2";
... and "sd3", as they refer to the clock signals from the clock generator,
and thus should match the register and label names.
(Note: The (old) R-Car E2 v0.1 datasheet does call them SD1 and SD2 :-(
>> @@ -518,7 +518,7 @@
>> mstp3_clks: mstp3_clks at e615013c {
>> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
>> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
>> - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
>> + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
>> <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
>> #clock-cells = <1>;
>> clock-indices = <
>> @@ -527,7 +527,7 @@
>> R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
>> >;
>> clock-output-names =
>> - "sdhi2", "sdhi1", "sdhi0",
>> + "sdhi3", "sdhi2", "sdhi0",
These are disputable: the MSTP docs indeed call them SDHI3, SDHI2, and
SDHI0 (in the latest R-Car Gen2 family datasheet revision).
But for all(?) other MSTP clocks they match the actual module instances
that are driven by the clocks.
So I think these should stay "sdhi2", "sdhi1", and "sdhi0", as they refer to
the SDHI instances, not the parent clocks.
At least we should be consistent with the R8A7794_CLK_SDHIx indices,
which are 2, 1, and 0, not 3, 2, 0.
>> "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
>> };
>> mstp7_clks: mstp7_clks at e615014c {
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
2015-01-27 8:48 ` Geert Uytterhoeven
@ 2015-01-28 0:55 ` Simon Horman
-1 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2015-01-28 0:55 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 27, 2015 at 09:48:09AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Tue, Jan 27, 2015 at 1:59 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Thu, Jan 22, 2015 at 11:25:59AM +0900, Simon Horman wrote:
> >> * Correct base address of SD3 div6 clk.
> >> * Update div6 labels and MSTP output names
> >> There appears to have been some inconsistency and confusion here as on
> >> the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
> >> the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
> >>
> >> This has no run-time affect as the clock nodes are not currently used.
> >>
> >> Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
> >> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> >> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> >
> > Geert,
> >
> > could you find a moment to look over this.
> > Its a follow-up to an earlier patch which you gave me some
> > feedback on.
>
> Sorry, it fell through the cracks.
No problem, its a low priority item.
Thanks for pointing out all the problems with my patch.
I've attempted to address them in "ARM: shmobile: r8a7794: Correct SDHI
clock base address, labels and output-names".
>
> >> ---
> >> * A similar change to update the div6 clock node names and labels,
> >> and the MSTP clock output-names is required for the r8a7791.
> >> The base addresses appear to be correct there.
> >> ---
> >> arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
> >> 1 file changed, 5 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> >> index 8f78da5..b98534e 100644
> >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> >> @@ -294,16 +294,16 @@
> >> "lb", "qspi", "sdh", "sd0", "z";
> >> };
> >> /* Variable factor clocks */
> >> - sd1_clk: sd2_clk@e6150078 {
> >> + sd2_clk: sd2_clk@e6150078 {
> >> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> >> reg = <0 0xe6150078 0 4>;
> >> clocks = <&pll1_div2_clk>;
> >> #clock-cells = <0>;
> >> clock-output-names = "sd1";
>
> I think these should be "sd2"...
>
> >> };
> >> - sd2_clk: sd3_clk@e615007c {
> >> + sd3_clk: sd3_clk@e615026c {
> >> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> >> - reg = <0 0xe615007c 0 4>;
> >> + reg = <0 0xe615026c 0 4>;
> >> clocks = <&pll1_div2_clk>;
> >> #clock-cells = <0>;
> >> clock-output-names = "sd2";
>
> ... and "sd3", as they refer to the clock signals from the clock generator,
> and thus should match the register and label names.
>
> (Note: The (old) R-Car E2 v0.1 datasheet does call them SD1 and SD2 :-(
>
> >> @@ -518,7 +518,7 @@
> >> mstp3_clks: mstp3_clks@e615013c {
> >> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
> >> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
> >> - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> >> + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> >> <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
> >> #clock-cells = <1>;
> >> clock-indices = <
> >> @@ -527,7 +527,7 @@
> >> R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
> >> >;
> >> clock-output-names > >> - "sdhi2", "sdhi1", "sdhi0",
> >> + "sdhi3", "sdhi2", "sdhi0",
>
> These are disputable: the MSTP docs indeed call them SDHI3, SDHI2, and
> SDHI0 (in the latest R-Car Gen2 family datasheet revision).
> But for all(?) other MSTP clocks they match the actual module instances
> that are driven by the clocks.
> So I think these should stay "sdhi2", "sdhi1", and "sdhi0", as they refer to
> the SDHI instances, not the parent clocks.
>
> At least we should be consistent with the R8A7794_CLK_SDHIx indices,
> which are 2, 1, and 0, not 3, 2, 0.
>
> >> "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
> >> };
> >> mstp7_clks: mstp7_clks@e615014c {
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names
@ 2015-01-28 0:55 ` Simon Horman
0 siblings, 0 replies; 8+ messages in thread
From: Simon Horman @ 2015-01-28 0:55 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jan 27, 2015 at 09:48:09AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
>
> On Tue, Jan 27, 2015 at 1:59 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Thu, Jan 22, 2015 at 11:25:59AM +0900, Simon Horman wrote:
> >> * Correct base address of SD3 div6 clk.
> >> * Update div6 labels and MSTP output names
> >> There appears to have been some inconsistency and confusion here as on
> >> the r8a7790 these clocks are referred to as SD(HI)1 and SD(HI)2 while on
> >> the r8a7791 and r8a7794 they are referred to as SD(HI)2 and SD(HI)3.
> >>
> >> This has no run-time affect as the clock nodes are not currently used.
> >>
> >> Fixes: 8e181633e6ca96049 ("ARM: shmobile: r8a7794: Add SDHI clocks to device tree")
> >> Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> >> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> >> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
> >
> > Geert,
> >
> > could you find a moment to look over this.
> > Its a follow-up to an earlier patch which you gave me some
> > feedback on.
>
> Sorry, it fell through the cracks.
No problem, its a low priority item.
Thanks for pointing out all the problems with my patch.
I've attempted to address them in "ARM: shmobile: r8a7794: Correct SDHI
clock base address, labels and output-names".
>
> >> ---
> >> * A similar change to update the div6 clock node names and labels,
> >> and the MSTP clock output-names is required for the r8a7791.
> >> The base addresses appear to be correct there.
> >> ---
> >> arch/arm/boot/dts/r8a7794.dtsi | 10 +++++-----
> >> 1 file changed, 5 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
> >> index 8f78da5..b98534e 100644
> >> --- a/arch/arm/boot/dts/r8a7794.dtsi
> >> +++ b/arch/arm/boot/dts/r8a7794.dtsi
> >> @@ -294,16 +294,16 @@
> >> "lb", "qspi", "sdh", "sd0", "z";
> >> };
> >> /* Variable factor clocks */
> >> - sd1_clk: sd2_clk at e6150078 {
> >> + sd2_clk: sd2_clk at e6150078 {
> >> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> >> reg = <0 0xe6150078 0 4>;
> >> clocks = <&pll1_div2_clk>;
> >> #clock-cells = <0>;
> >> clock-output-names = "sd1";
>
> I think these should be "sd2"...
>
> >> };
> >> - sd2_clk: sd3_clk at e615007c {
> >> + sd3_clk: sd3_clk at e615026c {
> >> compatible = "renesas,r8a7794-div6-clock", "renesas,cpg-div6-clock";
> >> - reg = <0 0xe615007c 0 4>;
> >> + reg = <0 0xe615026c 0 4>;
> >> clocks = <&pll1_div2_clk>;
> >> #clock-cells = <0>;
> >> clock-output-names = "sd2";
>
> ... and "sd3", as they refer to the clock signals from the clock generator,
> and thus should match the register and label names.
>
> (Note: The (old) R-Car E2 v0.1 datasheet does call them SD1 and SD2 :-(
>
> >> @@ -518,7 +518,7 @@
> >> mstp3_clks: mstp3_clks at e615013c {
> >> compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
> >> reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
> >> - clocks = <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> >> + clocks = <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7794_CLK_SD0>,
> >> <&mmc0_clk>, <&rclk_clk>, <&hp_clk>, <&hp_clk>;
> >> #clock-cells = <1>;
> >> clock-indices = <
> >> @@ -527,7 +527,7 @@
> >> R8A7794_CLK_USBDMAC0 R8A7794_CLK_USBDMAC1
> >> >;
> >> clock-output-names =
> >> - "sdhi2", "sdhi1", "sdhi0",
> >> + "sdhi3", "sdhi2", "sdhi0",
>
> These are disputable: the MSTP docs indeed call them SDHI3, SDHI2, and
> SDHI0 (in the latest R-Car Gen2 family datasheet revision).
> But for all(?) other MSTP clocks they match the actual module instances
> that are driven by the clocks.
> So I think these should stay "sdhi2", "sdhi1", and "sdhi0", as they refer to
> the SDHI instances, not the parent clocks.
>
> At least we should be consistent with the R8A7794_CLK_SDHIx indices,
> which are 2, 1, and 0, not 3, 2, 0.
>
> >> "mmcif0", "cmt1", "usbdmac0", "usbdmac1";
> >> };
> >> mstp7_clks: mstp7_clks at e615014c {
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-01-28 0:55 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-22 2:25 [PATCH repost] ARM: shmobile: r8a7794: Correct SDHI base address, clock labels and output-names Simon Horman
2015-01-22 2:25 ` Simon Horman
2015-01-27 0:59 ` Simon Horman
2015-01-27 0:59 ` Simon Horman
2015-01-27 8:48 ` Geert Uytterhoeven
2015-01-27 8:48 ` Geert Uytterhoeven
2015-01-28 0:55 ` Simon Horman
2015-01-28 0:55 ` Simon Horman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.