On Tue, Feb 10, 2015 at 05:10:04PM +0800, Zhangfei Gao wrote: > Add usb phy controller for hi6220 platform > > Signed-off-by: Zhangfei Gao > --- > drivers/usb/phy/Kconfig | 9 ++ > drivers/usb/phy/Makefile | 1 + > drivers/usb/phy/phy-hi6220-usb.c | 306 +++++++++++++++++++++++++++++++++++++++ > 3 files changed, 316 insertions(+) > create mode 100644 drivers/usb/phy/phy-hi6220-usb.c > > diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig > index c6d0c8e..405a3d0 100644 > --- a/drivers/usb/phy/Kconfig > +++ b/drivers/usb/phy/Kconfig > @@ -173,6 +173,15 @@ config USB_MXS_PHY > > MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x. > > +config USB_HI6220_PHY > + tristate "hi6220 USB PHY support" > + select USB_PHY > + select MFD_SYSCON > + help > + Enable this to support the HISILICON HI6220 USB PHY. > + > + To compile this driver as a module, choose M here. > + > config USB_RCAR_PHY > tristate "Renesas R-Car USB PHY support" > depends on USB || USB_GADGET > diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile > index 75f2bba..00172d3 100644 > --- a/drivers/usb/phy/Makefile > +++ b/drivers/usb/phy/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o > obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o > obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o > obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o > +obj-$(CONFIG_USB_HI6220_PHY) += phy-hi6220-usb.o new drivers only on drivers/phy/, sorry. -- balbi