All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kashyap Chamarthy <kchamart@redhat.com>
To: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Bandan Das <bsd@redhat.com>, kvm@vger.kernel.org, dgilbert@redhat.com
Subject: Re: [nVMX] With 3.20.0-0.rc0.git5.1 on L0, booting L2 guest results in L1 *rebooting*
Date: Wed, 18 Feb 2015 11:20:32 +0100	[thread overview]
Message-ID: <20150218102032.GD11686@tesla.redhat.com> (raw)
In-Reply-To: <54E38359.2010900@siemens.com>

On Tue, Feb 17, 2015 at 07:07:21PM +0100, Jan Kiszka wrote:
> On 2015-02-17 19:00, Bandan Das wrote:
> > Kashyap Chamarthy <kchamart@redhat.com> writes:
> > ..
> >>>
> >>> Does enable_apicv make a difference?
> >>
> >> Actually, I did perform a test (on Paolo's suggestion on IRC) with
> >> enable_apicv=0 on physical host, and it didn't make any difference:
> >>
> >> $ cat /proc/cmdline 
> >> BOOT_IMAGE=/vmlinuz-3.20.0-0.rc0.git5.1.fc23.x86_64 root=/dev/mapper/fedora--server_dell--per910--02-root ro console=ttyS1,115200n81 rd.lvm.lv=fedora-server_dell-per910-02/swap rd.lvm.lv=fedora-server_dell-per910-02/root LANG=en_US.UTF-8 enable_apicv=0
> > 
> > I am not sure if this works ? enable_apicv is a kvm_intel module parameter
> 
> Good point. Has to be kvm_intel.enable_apicv=0 (if the module is built in).

Hmm, yeah, I should have just added "options kvm-intel enable_apicv=n"
(without quotes) to  /etc/modprobe.d/dist.conf.

I just rebooted the host with "kvm_intel.enable_apicv=0" on Kernel command
line:

$ dmesg | grep apicv
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.20.0-0.rc0.git5.1.fc23.x86_64 root=/dev/mapper/fedora--server_dell--per910--02-root ro console=ttyS1,115200n81 rd.lvm.lv=fedora-server_dell-per910-02/swap rd.lvm.lv=fedora-server_dell-per910-02/root LANG=en_US.UTF-8 kvm_intel.enable_apicv=0
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.20.0-0.rc0.git5.1.fc23.x86_64 root=/dev/mapper/fedora--server_dell--per910--02-root ro console=ttyS1,115200n81 rd.lvm.lv=fedora-server_dell-per910-02/swap rd.lvm.lv=fedora-server_dell-per910-02/root LANG=en_US.UTF-8 kvm_intel.enable_apicv=0

$ cat /sys/module/kvm_intel/parameters/enable_apicv
N
 

Then, booted an L2 guest over L1's serial console, while observing
host's `dmesg -w`, I can see the same traceback:

. . .
[  918.327553] ------------[ cut here ]------------
[  918.332196] WARNING: CPU: 13 PID: 2201 at arch/x86/kvm/vmx.c:9190 nested_vmx_vmexit+0x96e/0xb00 [kvm_intel]()
[  918.342162] Modules linked in: vhost_net vhost macvtap macvlan xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ip6table_filter ip6_tables cfg80211 rfkill iTCO_wdt ipmi_devintf iTCO_vendor_support gpio_ich dcdbas coretemp kvm_intel kvm crc32c_intel serio_raw ipmi_ssif ipmi_si tpm_tis tpm ipmi_msghandler acpi_power_meter i7core_edac lpc_ich edac_core acpi_cpufreq mfd_core shpchp wmi mgag200 i2c_algo_bit drm_kms_helper ttm drm ata_generic pata_acpi megaraid_sas bnx2
[  918.396548] CPU: 13 PID: 2201 Comm: qemu-system-x86 Not tainted 3.20.0-0.rc0.git5.1.fc23.x86_64 #1
[  918.405605] Hardware name: Dell Inc. PowerEdge R910/0P658H, BIOS 2.8.2 10/25/2012
[  918.413138]  0000000000000000 00000000651bc665 ffff883f619ebc18 ffffffff818760f7
[  918.420790]  0000000000000000 0000000000000000 ffff883f619ebc58 ffffffff810ab80a
[  918.428336]  ffff887f5b838000 ffff883f3f8c8000 0000000000000000 0000000000000014
[  918.435865] Call Trace:
[  918.438390]  [<ffffffff818760f7>] dump_stack+0x4c/0x65
[  918.443590]  [<ffffffff810ab80a>] warn_slowpath_common+0x8a/0xc0
[  918.449596]  [<ffffffff810ab93a>] warn_slowpath_null+0x1a/0x20
[  918.455494]  [<ffffffffa100857e>] nested_vmx_vmexit+0x96e/0xb00 [kvm_intel]
[  918.462455]  [<ffffffffa100b5f7>] ? vmx_handle_exit+0x1e7/0xcb2 [kvm_intel]
[  918.469444]  [<ffffffffa0236972>] ? kvm_arch_vcpu_ioctl_run+0x6d2/0x1b50 [kvm]
[  918.476731]  [<ffffffffa100892a>] vmx_queue_exception+0x10a/0x150 [kvm_intel]
[  918.483870]  [<ffffffffa023730b>] kvm_arch_vcpu_ioctl_run+0x106b/0x1b50 [kvm]
[  918.491078]  [<ffffffffa0236972>] ? kvm_arch_vcpu_ioctl_run+0x6d2/0x1b50 [kvm]
[  918.498302]  [<ffffffff8110760d>] ? trace_hardirqs_on+0xd/0x10
[  918.504203]  [<ffffffffa021edf6>] ? vcpu_load+0x26/0x70 [kvm]
[  918.510012]  [<ffffffff81103c0f>] ? lock_release_holdtime.part.29+0xf/0x200
[  918.516973]  [<ffffffffa021f203>] kvm_vcpu_ioctl+0x383/0x7e0 [kvm]
[  918.523157]  [<ffffffff81027b9d>] ? native_sched_clock+0x2d/0xa0
[  918.529167]  [<ffffffff810d5fc6>] ? creds_are_invalid.part.1+0x16/0x50
[  918.535701]  [<ffffffff810d6021>] ? creds_are_invalid+0x21/0x30
[  918.541678]  [<ffffffff813a61da>] ? inode_has_perm.isra.48+0x2a/0xa0
[  918.548097]  [<ffffffff8128c7b8>] do_vfs_ioctl+0x2e8/0x530
[  918.553579]  [<ffffffff8128ca81>] SyS_ioctl+0x81/0xa0
[  918.558635]  [<ffffffff8187f8e9>] system_call_fastpath+0x12/0x17
[  918.564640] ---[ end trace b07d41c569219c46 ]---
[ 1092.389383 <  173.824743>] kvm [2168]: vcpu0 unhandled rdmsr: 0x1c9
[ 1092.394374 <    0.004991>] kvm [2168]: vcpu0 unhandled rdmsr: 0x1a6
[ 1092.399399 <    0.005025>] kvm [2168]: vcpu0 unhandled rdmsr: 0x3f6
. . .

-- 
/kashyap

  reply	other threads:[~2015-02-18 10:20 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-16 20:40 [nVMX] With 3.20.0-0.rc0.git5.1 on L0, booting L2 guest results in L1 *rebooting* Kashyap Chamarthy
2015-02-17  6:02 ` Jan Kiszka
2015-02-17 11:24   ` Kashyap Chamarthy
2015-02-17 18:00     ` Bandan Das
2015-02-17 18:07       ` Jan Kiszka
2015-02-18 10:20         ` Kashyap Chamarthy [this message]
2015-02-18 16:42     ` Paolo Bonzini
2015-02-19 12:07       ` Kashyap Chamarthy
2015-02-19 15:01         ` Radim Krčmář
2015-02-19 16:02           ` Radim Krčmář
2015-02-19 16:07             ` Radim Krčmář
2015-02-19 21:10             ` Kashyap Chamarthy
2015-02-19 22:28               ` Kashyap Chamarthy
2015-02-20 16:14                 ` Radim Krčmář
2015-02-20 19:45                   ` Kashyap Chamarthy
2015-02-22 15:46                     ` Kashyap Chamarthy
2015-02-23 13:56                       ` Radim Krčmář
2015-02-23 16:14                         ` Kashyap Chamarthy
2015-02-23 17:09                           ` Kashyap Chamarthy
2015-02-23 18:05                             ` Kashyap Chamarthy
2015-02-24 16:30                               ` [PATCH] KVM: nVMX: mask unrestricted_guest if disabled on L0 Radim Krčmář
2015-02-24 16:39                                 ` Jan Kiszka
2015-02-24 18:32                                   ` Bandan Das
2015-02-25 15:50                                 ` Kashyap Chamarthy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150218102032.GD11686@tesla.redhat.com \
    --to=kchamart@redhat.com \
    --cc=bsd@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=jan.kiszka@siemens.com \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.