From: Lee Jones <lee.jones@linaro.org>
To: torvalds@linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: [GIT PULL] MFD fixes for v3.20
Date: Wed, 18 Feb 2015 16:31:12 +0000 [thread overview]
Message-ID: <20150218163112.GI22296@x1> (raw)
In-Reply-To: <20150217115630.GB3989@x1>
Let's try this one more time.
Linus,
The following changes since commit b7392d2247cfe6771f95d256374f1a8e6a6f48d6:
Linux 3.19-rc2 (2014-12-28 16:49:37 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git tags/mfd-for-linus-3.20
for you to fetch changes up to 0a65fbf64dad890d9dd60ab1dc0ebdb9fb0a9e33:
mfd: intel_soc_pmic: Add missing error check for devm_kzalloc (2015-02-16 17:11:43 +0000)
----------------------------------------------------------------
Changes to existing drivers:
- Repair platform device collision; da9052, wm8994-core
- Regmap configuration amendments; tps65218
- Fix runtime PM deadlock; rtsx_usb
- Remove unused/superfluous code; db8500-prcmu, omap-usb-host
- Enable watchdog timer; lpc_sch
- Add start/stop RX URBs helpers; dln2
- Remove platform device (DT only); max77686, max77802
- Support suspend and resume; dln2
- Add Device Tree support; da9063
- Supply extra error checking; intel_soc_pmic
- Constify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
max77686, lm3533, retu, pcf50633,
davinci_voicecodec, smsc-ece1099,
tps65218, mc13xxx, tps65217, twl-core,
twl6040
New drivers/supported devices:
- Supply new driver for Richtek RT5033
- Supply new driver for DA9150 Charger and FuelGauge
- Supply new driver for Qualcomm Resource Power Manager (RPM)
- Add support for the ir-clk into sun6i-prcm
- Add support for FuelGauge into axp20x
----------------------------------------------------------------
Adam Thomson (1):
mfd: Add support for DA9150 combined charger & fuel-gauge device
Beomho Seo (1):
mfd: rt5033: Add Richtek RT5033 driver core.
Bjorn Andersson (3):
mfd: devicetree: bindings: Add Qualcomm RPM DT binding
mfd: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Add missing state flag in call to RPM
Fabio Estevam (1):
mfd: da9052-core: Fix platform-device id collision
Felipe Balbi (2):
mfd: tps65218: Make INT[12] and STATUS registers volatile
mfd: tps65218: Make INT1 our status_base register
Hans de Goede (1):
mfd: sun6i-prcm: Add support for the ir-clk
Inha Song (1):
mfd: wm8994: Set mfd id-base for regulator devs creation to avoid conflicts
Kiran Padwal (1):
mfd: intel_soc_pmic: Add missing error check for devm_kzalloc
Krzysztof Kozlowski (15):
mfd: 88pm860x-core: Constify struct regmap_config
mfd: hi6421-pmic: Constify struct regmap_config
mfd: intel_soc_pmic: Constify struct regmap_config
mfd: max77686: Constify struct regmap_config
mfd: lm3533: Constify struct regmap_config
mfd: retu: Constify struct regmap_config
mfd: pcf50633: Constify struct regmap_config
mfd: davinci_voicecodec: Constify struct regmap_config
mfd: smsc-ece1099: Constify struct regmap_config
mfd: tps65218: Constify struct regmap_config
mfd: mc13xxx: i2c/spi: Constify struct regmap_config
mfd: tps65217: Constify struct regmap_config
mfd: twl-core: Constify struct regmap_config and reg_default array
mfd: twl6040: Constify struct regmap_config and reg_default array
mfd: max77686/802: Remove support for board files
Lee Jones (1):
Merge tag 'mfd-fixes-3.19' into HEAD
Octavian Purdila (2):
mfd: dln2: Add start/stop RX URBs helpers
mfd: dln2: Add suspend/resume functionality
Ong Boon Leong (1):
mfd: lpc_sch: Enable WDT for Intel Quark X1000
Rickard Strandqvist (2):
mfd: db8500-prcmu: Remove unused function
mfd: omap-usb-host: Remove some unused functions
Roger Tseng (2):
mfd: rtsx_usb: Fix runtime PM deadlock
mfd: rtsx_usb: Defer autosuspend while card exists
Steve Twiss (2):
mfd: da9063: Add device tree support
mfd: devicetree: Add bindings for DA9063
Todd E Brandt (1):
mfd: axp20x: Add support for fuel gauge cell driver
Documentation/devicetree/bindings/mfd/da9063.txt | 93 ++++++++++++
Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 70 +++++++++
drivers/mfd/88pm860x-core.c | 2 +-
drivers/mfd/Kconfig | 39 +++++
drivers/mfd/Makefile | 4 +-
drivers/mfd/da9052-core.c | 3 +-
drivers/mfd/da9063-core.c | 2 +
drivers/mfd/da9063-i2c.c | 9 ++
drivers/mfd/da9150-core.c | 413 +++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/davinci_voicecodec.c | 2 +-
drivers/mfd/db8500-prcmu.c | 9 --
drivers/mfd/dln2.c | 71 +++++++--
drivers/mfd/hi6421-pmic-core.c | 2 +-
drivers/mfd/intel_soc_pmic_core.c | 3 +
drivers/mfd/intel_soc_pmic_core.h | 2 +-
drivers/mfd/intel_soc_pmic_crc.c | 2 +-
drivers/mfd/lm3533-core.c | 2 +-
drivers/mfd/lpc_sch.c | 1 +
drivers/mfd/max77686.c | 29 +---
drivers/mfd/mc13xxx-i2c.c | 2 +-
drivers/mfd/mc13xxx-spi.c | 2 +-
drivers/mfd/omap-usb-host.c | 10 --
drivers/mfd/pcf50633-core.c | 2 +-
drivers/mfd/qcom_rpm.c | 581 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/mfd/retu-mfd.c | 2 +-
drivers/mfd/rt5033.c | 142 +++++++++++++++++
drivers/mfd/rtsx_usb.c | 22 ++-
drivers/mfd/smsc-ece1099.c | 2 +-
drivers/mfd/sun6i-prcm.c | 14 ++
drivers/mfd/tps65217.c | 2 +-
drivers/mfd/tps65218.c | 14 +-
drivers/mfd/twl-core.c | 8 +-
drivers/mfd/twl6040.c | 4 +-
drivers/mfd/wm8994-core.c | 6 +-
drivers/regulator/qcom_rpm-regulator.c | 1 +
include/dt-bindings/mfd/qcom-rpm.h | 154 +++++++++++++++++++
include/linux/mfd/axp20x.h | 43 +++++-
include/linux/mfd/da9063/core.h | 1 +
include/linux/mfd/da9150/core.h | 68 +++++++++
include/linux/mfd/da9150/registers.h | 1155 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/max77686-private.h | 1 -
include/linux/mfd/max77686.h | 28 ----
include/linux/mfd/qcom_rpm.h | 13 ++
include/linux/mfd/rt5033-private.h | 260 +++++++++++++++++++++++++++++++
include/linux/mfd/rt5033.h | 62 ++++++++
45 files changed, 3239 insertions(+), 118 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
create mode 100644 Documentation/devicetree/bindings/mfd/qcom-rpm.txt
create mode 100644 drivers/mfd/da9150-core.c
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 drivers/mfd/rt5033.c
create mode 100644 include/dt-bindings/mfd/qcom-rpm.h
create mode 100644 include/linux/mfd/da9150/core.h
create mode 100644 include/linux/mfd/da9150/registers.h
create mode 100644 include/linux/mfd/qcom_rpm.h
create mode 100644 include/linux/mfd/rt5033-private.h
create mode 100644 include/linux/mfd/rt5033.h
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
prev parent reply other threads:[~2015-02-18 16:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 11:56 [GIT PULL] MFD fixes for v3.20 Lee Jones
2015-02-18 16:22 ` Linus Torvalds
2015-02-18 16:29 ` Lee Jones
2015-02-18 16:31 ` Lee Jones [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150218163112.GI22296@x1 \
--to=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.