All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Roper <matthew.d.roper@intel.com>
To: ville.syrjala@linux.intel.com
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 7/9] drm/i915: Update watermarks after the derived plane state is uptodate
Date: Tue, 10 Mar 2015 10:13:52 -0700	[thread overview]
Message-ID: <20150310171352.GJ27526@intel.com> (raw)
In-Reply-To: <1425986129-15547-8-git-send-email-ville.syrjala@linux.intel.com>

On Tue, Mar 10, 2015 at 01:15:27PM +0200, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> 
> When enabling planes during .crtc_enable() we currently want to update
> the watermarks before enabling the planes. We already do it once just
> before enabling the pipe, but at that point out derived plane state is
> still out of whack, so we need to do it again after the .atomic_check()
> hooks have been called.
> 
> What this means is now we could actually start to trust the derived
> plane state (clipped size, 'visible', etc.) in the watermark code.
> 
> The pre pipe enable watermark update is supposed to be just make sure
> the other pipes are ready to have their FIFOs potentially reduced, so we
> need to keep it there as well.
> 
> Since we don't yet have proper two-part watermark update leave the
> watermakrs alone in the plane disable case. This way they'll get updated
> only after the planes and pipe have all been turned off.
> 
> Cc: Matt Roper <matthew.d.roper@intel.com>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

Reviewed-by: Matt Roper <matthew.d.roper@intel.com>

> ---
>  drivers/gpu/drm/i915/intel_display.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 33680a8..a9201a7 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -4167,6 +4167,8 @@ static void _intel_crtc_enable_planes(struct intel_crtc *crtc)
>  			state->visible = false;
>  	}
>  
> +	intel_update_watermarks(&crtc->base);
> +
>  	crtc_funcs->atomic_begin(&crtc->base);
>  
>  	for_each_intel_plane(dev, plane) {
> @@ -4213,6 +4215,8 @@ static void _intel_crtc_disable_planes(struct intel_crtc *crtc)
>  	}
>  
>  	crtc_funcs->atomic_flush(&crtc->base);
> +
> +	/* we'll defer watermark update to after the pipe has been disabled */
>  }
>  
>  void hsw_enable_ips(struct intel_crtc *crtc)
> -- 
> 2.0.5
> 

-- 
Matt Roper
Graphics Software Engineer
IoTG Platform Enabling & Development
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-03-10 17:14 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-10 11:15 [PATCH 0/9] drm/i915: Update derived plane state at crtc enable/disable ville.syrjala
2015-03-10 11:15 ` [PATCH 1/9] drm/i915: Remove debug prints from primary plane update funcs ville.syrjala
2015-03-10 15:55   ` Jesse Barnes
2015-03-10 11:15 ` [PATCH 2/9] drm/i915: Reduce clutter by using the local plane pointer ville.syrjala
2015-03-10 16:00   ` Jesse Barnes
2015-03-10 11:15 ` [PATCH 3/9] drm/i915: Use plane->state->fb instead of plane->fb in intel_plane_restore() ville.syrjala
2015-03-10 17:01   ` Matt Roper
2015-03-10 17:48     ` Ville Syrjälä
2015-03-11  9:41       ` Daniel Vetter
2015-03-11 10:04         ` Daniel Vetter
2015-03-10 11:15 ` [PATCH 4/9] drm/i915: Make derived plane state correct after crtc_enable ville.syrjala
2015-03-10 17:01   ` Matt Roper
2015-03-10 17:57     ` Ville Syrjälä
2015-03-11  9:52       ` Daniel Vetter
2015-03-11 10:03         ` Daniel Vetter
2015-03-11 10:05         ` Ville Syrjälä
2015-03-11 10:24           ` Daniel Vetter
2015-03-11 12:19             ` Ville Syrjälä
2015-03-11 16:23               ` Daniel Vetter
2015-03-11 16:40                 ` Ville Syrjälä
2015-03-10 11:15 ` [PATCH 5/9] drm/i915: Pass primary plane size to .update_primary_plane() ville.syrjala
2015-03-10 17:10   ` Matt Roper
2015-03-10 17:59     ` Ville Syrjälä
2015-03-10 20:57       ` Matt Roper
2015-03-11  9:42         ` Ville Syrjälä
2015-03-11  9:57       ` Daniel Vetter
2015-03-11  5:09   ` sonika
2015-03-11  9:27     ` Ville Syrjälä
2015-03-11  9:26       ` sonika
2015-03-19 14:28   ` [PATCH v2 " ville.syrjala
2015-03-20  9:49     ` Jindal, Sonika
2015-03-20 10:04       ` Ville Syrjälä
2015-03-20 10:53         ` Jindal, Sonika
2015-03-20 14:26           ` Ville Syrjälä
2015-03-23  4:11     ` sonika
2015-03-10 11:15 ` [PATCH 6/9] drm/i915: Pass the primary plane position " ville.syrjala
2015-03-19 14:29   ` [PATCH v2 " ville.syrjala
2015-03-20 11:22     ` Jindal, Sonika
2015-03-10 11:15 ` [PATCH 7/9] drm/i915: Update watermarks after the derived plane state is uptodate ville.syrjala
2015-03-10 17:13   ` Matt Roper [this message]
2015-03-11  9:59     ` Daniel Vetter
2015-03-10 11:15 ` [PATCH 8/9] drm/i915: Use state->visible in wm calculation ville.syrjala
2015-03-10 17:19   ` Matt Roper
2015-03-10 18:01     ` Ville Syrjälä
2015-03-19 14:31   ` [PATCH v2 " ville.syrjala
2015-03-10 11:15 ` [PATCH 9/9] drm/i915: Don't re-enable an explicitly disabled primary plane due to sprite coverage changes ville.syrjala
2015-03-10 17:58   ` shuang.he
2015-03-11 10:00   ` Daniel Vetter
2015-03-11 10:09     ` Ville Syrjälä
2015-03-11 10:28       ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150310171352.GJ27526@intel.com \
    --to=matthew.d.roper@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=ville.syrjala@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.