From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Wed, 11 Mar 2015 00:01:56 +0000 Subject: Re: Can't boot kernel v4.0-rc2 on Koelsch Message-Id: <20150311000150.GA6958@verge.net.au> List-Id: References: <2263226.JPOqZgiCRj@avalon> In-Reply-To: <2263226.JPOqZgiCRj@avalon> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: linux-sh@vger.kernel.org On Tue, Mar 10, 2015 at 12:32:59PM +0100, Geert Uytterhoeven wrote: > Hi Hiep-san, > > On Tue, Mar 10, 2015 at 10:03 AM, Cao Minh Hiep wrote: > > On 2015年03月10日 17:05, Nobuhiro Iwamatsu wrote: > >> This is user land issue. > >> Hiep, if you have not changed ttySCX in inittab, you will need to change. > >> Could you check your inittab? > >> > >> --- a/inittab 2015-03-10 15:01:58.986609389 +0900 > >> +++ b/inittab 2015-03-10 15:00:32.132094877 +0900 > >> @@ -28,7 +28,7 @@ > >> l6:6:wait:/etc/init.d/rc 6 > >> # Normally not reached, but fallthrough in case of emergency. > >> z6:6:respawn:/sbin/sulogin > >> -SC6:12345:respawn:/sbin/getty -L 38400 ttySC6 > >> +SC0:12345:respawn:/sbin/getty -L 38400 ttySC0 > >> # /sbin/getty invocations for the runlevels. > >> # > >> # The "id" field MUST be the same as the last > > > > There is no inittab file in Linaro userland that I am using. > > I'm not familiar with the Linaro userland. > > Is there any other configuration file that contains the string "ttySC6"? > Or does the Linaro userland derive it from the kernel command line? > If yes, perhaps there's a newer version that does look at stdout-path instead? > > The goal of the stdout-path support was to have a better description in DT > and automate things. So I don't think reverting the change is the proper way > forward. > > If you can't get it to work, I think we should bring it up with the DT people > first, some of which work for Linaro. I am inclined to agree with with Geert on this issue.