All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Vetter <daniel@ffwll.ch>
To: Imre Deak <imre.deak@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 18/49] drm/i915/bxt: add workaround to avoid PTE corruption
Date: Tue, 17 Mar 2015 11:36:47 +0100	[thread overview]
Message-ID: <20150317103647.GA21993@phenom.ffwll.local> (raw)
In-Reply-To: <1426585215-8788-19-git-send-email-imre.deak@intel.com>

On Tue, Mar 17, 2015 at 11:39:44AM +0200, Imre Deak wrote:
> From: Robert Beckett <robert.beckett@intel.com>
> 
> Set TLBPF in TILECTL. This fixes an issue with BXT HW seeing
> corrupted pte entries.

Is this for the ggtt or ppgtt ptes?
-Daniel

> 
> v2:
> - move the workaround to bxt_init_clock_gating (imre)
> 
> Signed-off-by: Robert Beckett <robert.beckett@intel.com> (v1)
> Signed-off-by: Imre Deak <imre.deak@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_reg.h | 1 +
>  drivers/gpu/drm/i915/intel_pm.c | 2 ++
>  2 files changed, 3 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 1d074e8..d69d7b9 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1151,6 +1151,7 @@ enum skl_disp_power_wells {
>  /* control register for cpu gtt access */
>  #define TILECTL				0x101000
>  #define   TILECTL_SWZCTL			(1 << 0)
> +#define   TILECTL_TLBPF			(1 << 1)
>  #define   TILECTL_TLB_PREFETCH_DIS	(1 << 2)
>  #define   TILECTL_BACKSNOOP_DIS		(1 << 3)
>  
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 52d3c02..d3f2557 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -110,6 +110,8 @@ static void bxt_init_clock_gating(struct drm_device *dev)
>  		   GEN8_SDEUNIT_CLOCK_GATE_DISABLE |
>  		   GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ);
>  
> +	/* FIXME: apply on A0 only */
> +	I915_WRITE(TILECTL, I915_READ(TILECTL) | TILECTL_TLBPF);
>  }
>  
>  static void i915_pineview_get_mem_freq(struct drm_device *dev)
> -- 
> 2.1.0
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2015-03-17 10:35 UTC|newest]

Thread overview: 191+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-17  9:39 [PATCH 00/49] Basic Broxton enabling Imre Deak
2015-03-17  9:39 ` [PATCH 01/49] drm/i915/bxt: Add BXT PCI ids Imre Deak
2015-03-23  9:56   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 02/49] drm/i915/bxt: BXT FBC enablement Imre Deak
2015-03-17 17:49   ` Rodrigo Vivi
2015-03-25 20:46     ` Imre Deak
2015-03-26 15:35   ` [PATCH 02.1/49] drm/i915: use proper FBC base register on all new platforms Imre Deak
2015-03-30 10:05     ` Antti Koskipää
2015-03-30 10:04   ` [PATCH 02/49] drm/i915/bxt: BXT FBC enablement Antti Koskipää
2015-03-30 10:04   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 03/49] drm/i915/bxt: Add IS_BROXTON macro Imre Deak
2015-03-23  9:49   ` Sivakumar Thulasimani
2015-03-17  9:39 ` [PATCH 04/49] drm/i915/bxt: Broxton uses the same GMS values as Skylake Imre Deak
2015-03-23 10:23   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 05/49] drm/i915/bxt: Enable PTE encoding Imre Deak
2015-03-23 10:23   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 06/49] drm/i915/bxt: Broxton has 3 sprite planes on pipe A/B, 2 on pipe C Imre Deak
2015-03-23 10:29   ` Antti Koskipää
2015-03-31 11:18   ` Daniel Vetter
2015-03-17  9:39 ` [PATCH 07/49] drm/i915/bxt: Add the plane4 related interrupt definitions Imre Deak
2015-03-23 10:28   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 08/49] drm/i915/bxt: Broxton DDB is 512 blocks Imre Deak
2015-03-23 10:24   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 09/49] drm/i915/bxt: Broxton raises the maximum number of planes to 4 Imre Deak
2015-03-23 10:24   ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 10/49] drm/i915/bxt: map GTT as uncached Imre Deak
2015-03-17 10:33   ` Daniel Vetter
2015-03-17 12:31     ` Imre Deak
2015-03-17 13:47       ` Daniel Vetter
2015-03-27 11:07   ` [PATCH v2] " Imre Deak
2015-03-30 10:02     ` Antti Koskipää
2015-03-17  9:39 ` [PATCH 11/49] drm/i915/gen9: fix PIPE_CONTROL flush for VS_INVALIDATE Imre Deak
2015-03-17 10:35   ` Daniel Vetter
2015-04-08 12:56   ` Nick Hoath
2015-03-17  9:39 ` [PATCH 12/49] drm/i915/bxt: HardWare WorkAround ring initialisation for Broxton Imre Deak
2015-03-19 16:47   ` Nick Hoath
2015-03-17  9:39 ` [PATCH 13/49] drm/i915/bxt: add bxt_init_clock_gating Imre Deak
2015-03-19 16:50   ` Nick Hoath
2015-03-20 10:17     ` Imre Deak
2015-03-27 12:00   ` [PATCH v2 " Imre Deak
2015-04-08  9:35     ` Nick Hoath
2015-03-17  9:39 ` [PATCH 14/49] drm/i915/bxt: add GEN8_SDEUNIT_CLOCK_GATE_DISABLE workaround Imre Deak
2015-03-17 10:35   ` Daniel Vetter
2015-03-17 13:06     ` Imre Deak
2015-03-20  9:08       ` Nick Hoath
2015-03-20 10:37         ` Imre Deak
2015-03-25 14:53           ` Nick Hoath
2015-03-17  9:39 ` [PATCH 15/49] drm/i915/bxt: add GEN8_HDCUNIT_CLOCK_GATE_DISABLE_HDCREQ workaround Imre Deak
2015-04-08 13:04   ` Nick Hoath
2015-04-08 13:10     ` Imre Deak
2015-04-08 13:38       ` Nick Hoath
2015-04-08 13:45         ` Imre Deak
2015-04-08 14:13         ` Nick Hoath
2015-03-17  9:39 ` [PATCH 16/49] drm/i915/bxt: add WaDisableMaskBasedCammingInRCC workaround Imre Deak
2015-03-20  9:05   ` Nick Hoath
2015-03-20 10:25     ` Imre Deak
2015-03-25 14:52       ` Nick Hoath
2015-03-17  9:39 ` [PATCH 17/49] drm/i915/skl: " Imre Deak
2015-03-20  9:07   ` Nick Hoath
2015-03-20 10:33     ` Imre Deak
2015-04-08 13:40       ` Nick Hoath
2015-03-17  9:39 ` [PATCH 18/49] drm/i915/bxt: add workaround to avoid PTE corruption Imre Deak
2015-03-17 10:36   ` Daniel Vetter [this message]
2015-03-17 13:30     ` Imre Deak
2015-04-08 13:11   ` Nick Hoath
2015-03-17  9:39 ` [PATCH 19/49] drm/i915/bxt: don't use unsupported port detection Imre Deak
2015-03-25 16:07   ` Jani Nikula
2015-03-17  9:39 ` [PATCH 20/49] drm/i915/bxt: Add change to support gmbus pin pair for BXT Imre Deak
2015-03-25 16:45   ` Jani Nikula
2015-03-17  9:39 ` [PATCH 21/49] drm/i915/bxt: WARN in case BXT unused gmbus ports are accessed Imre Deak
2015-03-25 16:49   ` Jani Nikula
2015-03-17  9:39 ` [PATCH 22/49] drm/i915/bxt: Avoid registering unused gmbus ports as i2c adapter Imre Deak
2015-03-26 17:14   ` Jani Nikula
2015-03-26 22:24     ` Jani Nikula
2015-03-17  9:39 ` [PATCH 23/49] drm/i915/bxt: Increase DDI buf idle timeout Imre Deak
2015-03-17 10:39   ` Daniel Vetter
2015-03-27 12:19   ` [PATCH v2 " Imre Deak
2015-04-08  9:20     ` Jani Nikula
2015-04-08 12:00       ` Daniel Vetter
2015-03-17  9:39 ` [PATCH 24/49] drm/i915/bxt: DDI Hotplug interrupt setup Imre Deak
2015-03-17 10:48   ` Daniel Vetter
2015-03-17 15:39     ` Imre Deak
2015-03-27 12:54   ` [PATCH v6 " Imre Deak
2015-04-08 10:32     ` Jani Nikula
2015-04-10 12:08     ` [PATCH v7 " Imre Deak
2015-04-13 13:41       ` Jani Nikula
2015-03-17  9:39 ` [PATCH 25/49] drm/i915/bxt: Add DDI hpd handler Imre Deak
2015-03-17 10:52   ` Daniel Vetter
2015-03-17 16:03     ` Imre Deak
2015-03-27 15:22   ` [PATCH 25.1/49] drm/i915/bxt: support for HPD long/short status decoding Imre Deak
2015-04-08 10:58     ` Jani Nikula
2015-04-08 11:18       ` Imre Deak
2015-04-08 11:22         ` Jani Nikula
2015-04-08 10:55   ` [PATCH 25/49] drm/i915/bxt: Add DDI hpd handler Jani Nikula
2015-04-10 12:08   ` [PATCH v2 " Imre Deak
2015-04-13 13:45     ` Jani Nikula
2015-03-17  9:39 ` [PATCH 26/49] drm/i915/bxt: Add BXT support in gen8_irq functions Imre Deak
2015-04-08 11:06   ` Jani Nikula
2015-04-10 12:08   ` [PATCH v2 " Imre Deak
2015-04-13 13:51     ` Jani Nikula
2015-04-13 13:58       ` Imre Deak
2015-04-13 14:48     ` [PATCH v3 " Imre Deak
2015-04-14  7:23       ` Jani Nikula
2015-03-17  9:39 ` [PATCH 27/49] drm/i915/bxt: Enable GMBUS IRQ Imre Deak
2015-04-08 11:11   ` Jani Nikula
2015-04-10 12:08   ` [PATCH v4 " Imre Deak
2015-04-13 13:52     ` Jani Nikula
2015-03-17  9:39 ` [PATCH 28/49] drm/i915/bxt: Define BXT power domains Imre Deak
2015-03-19 17:08   ` Ville Syrjälä
2015-03-17  9:39 ` [PATCH 29/49] drm/i915: Rename vlv_cdclk_freq to cdclk_freq Imre Deak
2015-03-17 10:54   ` Daniel Vetter
2015-03-17 13:20     ` Ville Syrjälä
2015-04-15 19:19   ` Ville Syrjälä
2015-03-17  9:39 ` [PATCH 30/49] drm/i915/bxt: add display initialize/uninitialize sequence Imre Deak
2015-03-19 19:55   ` Ville Syrjälä
2015-03-20 14:10   ` Ville Syrjälä
2015-03-20 17:15     ` Imre Deak
2015-04-02 16:32   ` Ville Syrjälä
2015-04-07 14:07     ` Imre Deak
2015-04-15 13:42   ` [PATCH v4 30/49] drm/i915/bxt: add display initialize/uninitialize sequence (CDCLK) Imre Deak
2015-04-15 14:14     ` Ville Syrjälä
2015-04-15 13:42   ` [PATCH 30.1/49] drm/i915/bxt: add display initialize/uninitialize sequence (PHY) Imre Deak
2015-04-15 14:31     ` Ville Syrjälä
2015-03-17  9:39 ` [PATCH 31/49] drm/i915/bxt: add description about the BXT PHYs Imre Deak
2015-03-19 17:30   ` Ville Syrjälä
2015-04-15 13:42   ` [PATCH v2 " Imre Deak
2015-04-15 13:54     ` Ville Syrjälä
2015-03-17  9:39 ` [PATCH 32/49] drm/i915/bxt: Implement enable/disable for Display C9 state Imre Deak
2015-04-12 10:32   ` sagar.a.kamble
2015-04-13 10:09     ` Imre Deak
2015-04-13 10:25       ` Sagar Arun Kamble
2015-04-16  7:19   ` Daniel Vetter
2015-03-17  9:39 ` [PATCH 33/49] drm/i915/bxt: Add DC9 Trigger sequence Imre Deak
2015-03-30 12:19   ` sagar.a.kamble
2015-04-15 14:13   ` [PATCH v4 " Imre Deak
2015-03-17  9:40 ` [PATCH 34/49] drm/i915/bxt: Restrict PORT_CLK_SEL programming below gen9 Imre Deak
2015-04-15 14:15   ` [PATCH v3 " Imre Deak
2015-04-15 18:55     ` Sagar Arun Kamble
2015-03-17  9:40 ` [PATCH 35/49] drm/i915/bxt: fix panel fitter setup in crtc disable/enable Imre Deak
2015-03-17 13:51   ` Daniel Vetter
2015-03-17 14:22     ` Imre Deak
2015-03-18  8:37       ` Daniel Vetter
2015-03-18 10:31         ` Imre Deak
2015-04-12 10:14   ` sagar.a.kamble
2015-04-12 10:19   ` sagar.a.kamble
2015-04-13  9:21     ` Daniel Vetter
2015-04-12 10:22   ` [PATCH 34/49] drm/i915/bxt: Restrict PORT_CLK_SEL programming below gen9 sagar.a.kamble
2015-04-13 13:21     ` Damien Lespiau
2015-04-13 13:30       ` Imre Deak
2015-04-15 14:18   ` [PATCH v2 35/49] drm/i915/bxt: fix panel fitter setup in crtc disable/enable Imre Deak
2015-03-17  9:40 ` [PATCH 36/49] drm/i915/bxt: Define bxt DDI PLLs and implement enable/disable sequence Imre Deak
2015-03-19 20:27   ` Jesse Barnes
2015-03-19 20:33     ` Imre Deak
2015-03-17  9:40 ` [PATCH 37/49] drm/i915: factor out vlv_PLL_is_optimal Imre Deak
2015-03-19 20:31   ` Jesse Barnes
2015-03-17  9:40 ` [PATCH 38/49] drm/i915: check for div-by-zero in vlv_PLL_is_optimal Imre Deak
2015-03-19 20:31   ` Jesse Barnes
2015-03-20 10:00     ` Daniel Vetter
2015-03-17  9:40 ` [PATCH 39/49] drm/i915/chv: use vlv_PLL_is_optimal in chv_find_best_dpll Imre Deak
2015-03-19 20:34   ` Jesse Barnes
2015-03-19 20:55     ` Imre Deak
2015-03-19 20:56       ` Jesse Barnes
2015-03-20 10:02     ` Daniel Vetter
2015-03-17  9:40 ` [PATCH 40/49] drm/i915/bxt: add bxt_find_best_dpll Imre Deak
2015-03-19 20:39   ` Jesse Barnes
2015-03-17  9:40 ` [PATCH 41/49] drm/i915/bxt: BXT clock divider calculation Imre Deak
2015-03-19 20:46   ` Jesse Barnes
2015-03-17  9:40 ` [PATCH 42/49] drm/i915/bxt: Assign PLL for pipe Imre Deak
2015-03-19 20:48   ` Jesse Barnes
2015-04-16  9:32   ` Daniel Vetter
2015-03-17  9:40 ` [PATCH 43/49] drm/i915/bxt: Determine PLL attached to pipe Imre Deak
2015-03-19 20:48   ` Jesse Barnes
2015-03-17  9:40 ` [PATCH 44/49] drm/i915/bxt: Determine programmed frequency Imre Deak
2015-03-19 20:51   ` Jesse Barnes
2015-03-17  9:40 ` [PATCH 45/49] drm/i915: suppress false PLL state warnings on non-GMCH platforms Imre Deak
2015-03-19 20:53   ` Jesse Barnes
2015-03-19 20:57     ` Imre Deak
2015-03-19 21:19       ` Jesse Barnes
2015-03-17  9:40 ` [PATCH 46/49] drm/i915: Iterate through the initialized DDIs to prepare their buffers Imre Deak
2015-03-23 10:51   ` Sivakumar Thulasimani
2015-03-25 15:04     ` Damien Lespiau
2015-04-24 12:47   ` Ander Conselvan De Oliveira
2015-04-24 15:22     ` Imre Deak
2015-03-17  9:40 ` [PATCH 47/49] drm/i915: Don't write the HDMI buffer translation entry when not needed Imre Deak
2015-03-23 10:57   ` Sivakumar Thulasimani
2015-03-17  9:40 ` [PATCH 48/49] drm/i915/bxt: VSwing programming sequence Imre Deak
2015-03-24  9:19   ` Sivakumar Thulasimani
2015-04-09 17:14     ` Imre Deak
2015-03-17  9:40 ` [PATCH 49/49] drm/i915/bxt: Update max level of vswing Imre Deak
2015-03-17 18:22   ` shuang.he
2015-03-24 10:26   ` Sivakumar Thulasimani

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150317103647.GA21993@phenom.ffwll.local \
    --to=daniel@ffwll.ch \
    --cc=imre.deak@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.