From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Tue, 17 Mar 2015 16:16:14 +0100 Subject: [U-Boot] [PATCH] dfu: cmd: trigger watchdog before calling usb_gadget_handle_interrupts In-Reply-To: <55082BA6.6050605@denx.de> References: <1426170850-25688-1-git-send-email-hs@denx.de> <20150317105202.3ec3d070@amdc2363> <55080698.9020505@denx.de> <20150317135638.03fcd2ba@amdc2363> <55082BA6.6050605@denx.de> Message-ID: <20150317161614.5dbf495f@amdc2363> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Heiko, > Hello Lukasz, > > Am 17.03.2015 13:56, schrieb Lukasz Majewski: > > Hi Heiko, > > > >> Hello Lukasz, > >> > >> Am 17.03.2015 10:52, schrieb Lukasz Majewski: > >>> Hi Heiko, > >>> > >>>> trigger watchdog before calling usb_gadget_handle_interrupts() > >>>> This prevents board resets when calling dfu command on boards > >>>> which have a watchdog. > >>>> > >>>> Signed-off-by: Heiko Schocher > >>>> --- > >>>> > >>>> common/cmd_dfu.c | 2 ++ > >>>> 1 file changed, 2 insertions(+) > >>>> > >>>> diff --git a/common/cmd_dfu.c b/common/cmd_dfu.c > >>>> index e975abe..46af4cf 100644 > >>>> --- a/common/cmd_dfu.c > >>>> +++ b/common/cmd_dfu.c > >>>> @@ -9,6 +9,7 @@ > >>>> */ > >>>> > >>>> #include > >>>> +#include > >>>> #include > >>>> #include > >>>> #include > >>>> @@ -64,6 +65,7 @@ static int do_dfu(cmd_tbl_t *cmdtp, int flag, > >>>> int argc, char * const argv[]) if (ctrlc()) > >>>> goto exit; > >>>> > >>>> + WATCHDOG_RESET(); > >>>> usb_gadget_handle_interrupts(); > >>>> } > >>>> exit: > >>> > >>> It seems strange for me, that we must reset watchdog when looping > >>> in the dfu. > >> > >> Hmm.. maybe I overlook something, but If you look into this > >> while(1) loop, there is no trigger of the watchdog ... and if I > >> start the dfu command without a USB cable on the board, what > >> triggers the boards watchdog? > > > > So the problem is when cable is not attached to the board and you > > call dfu command to execute? > > Yes. For UMS gadget there is defined g_dnl_board_usb_cable_connected() function. However, it is not yet supported in dfu and requires working MUIC block, which might be not available at your board. > > >>> What is the WATCHDOG interval on the affected board? > >> > >> ~5 seconds > >> > >> Ah, this is on an at91 board .. and in the > >> drivers/serial/atmel_usart.c atmel_serial_tstc() is no > >> WATCHDOG_RESET... > >> > >> So ctrlc() does not trigger the watchdog > > > > Could you be a bit more specific here. Does your board expect > > ctrlc() to update watchdog, so it won't reset? > > I do not know, if ctrlc() must trigger the WDT ... I just looked into > the while(1) loop in common/cmd_dfu.c. There is only ctrlc() which > could trigger the WDT... and on at91 it does not trigger it ... By trigger you mean reset WDT core and don't reset the board? > > If dfu transfer is started there is some output on the console, which > triggers the WDT too ... do you have a board with a running WDT? On trats/trats2 we disable WDT when we enter the u-boot. I can imagine following situation when WDT is enabled when u-boot starts (its timeout is ~5sec) and then you start dfu transfer with not connected cable. Then 5sec pass since cable is not connected and no transfer is ongoing. This causes board reset by WDT. Am I right? > > bye, > Heiko -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group