[U-Boot] [PATCH] ARM: at91: atmel_nand: Support flash based BBT

[U-Boot] [PATCH] ARM: at91: atmel_nand: Support flash based BBT

[David Dueck]

Signed-off-by: David Dueck <davidcdueck@googlemail.com>
CC: Boris BREZILLON <boris.brezillon@free-electrons.com>
CC: Josh Wu <josh.wu@atmel.com>
CC: Andreas Bie?mann <andreas.devel@googlemail.com>
CC: Scott Wood <scottwood@freescale.com>
---
 drivers/mtd/nand/atmel_nand.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index b16e3aa..a2016e7 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1456,6 +1456,9 @@ int board_nand_init(struct nand_chip *nand)
 	nand->dev_ready = at91_nand_wait_ready;
 #endif
 	nand->chip_delay = 20;
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
+	nand->bbt_options |= NAND_BBT_USE_FLASH;
+#endif
 
 #ifdef CONFIG_ATMEL_NAND_HWECC
 #ifdef CONFIG_ATMEL_NAND_HW_PMECC
@@ -1522,6 +1525,9 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
 	nand->dev_ready = at91_nand_ready;
 #endif
 	nand->chip_delay = 75;
+#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
+	nand->bbt_options |= NAND_BBT_USE_FLASH;
+#endif
 
 	ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
 	if (ret)
-- 
2.3.0

[U-Boot] [PATCH] ARM: at91: atmel_nand: Support flash based BBT

[Boris Brezillon]

Hi David,

On Fri, 20 Mar 2015 08:27:23 +0100
David Dueck <davidcdueck@googlemail.com> wrote:

Can you add a short commit message ?

Apart from that, you have my

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

> Signed-off-by: David Dueck <davidcdueck@googlemail.com>
> CC: Boris BREZILLON <boris.brezillon@free-electrons.com>
> CC: Josh Wu <josh.wu@atmel.com>
> CC: Andreas Bie?mann <andreas.devel@googlemail.com>
> CC: Scott Wood <scottwood@freescale.com>
> ---
>  drivers/mtd/nand/atmel_nand.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
> index b16e3aa..a2016e7 100644
> --- a/drivers/mtd/nand/atmel_nand.c
> +++ b/drivers/mtd/nand/atmel_nand.c
> @@ -1456,6 +1456,9 @@ int board_nand_init(struct nand_chip *nand)
>  	nand->dev_ready = at91_nand_wait_ready;
>  #endif
>  	nand->chip_delay = 20;
> +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
> +	nand->bbt_options |= NAND_BBT_USE_FLASH;
> +#endif
>  
>  #ifdef CONFIG_ATMEL_NAND_HWECC
>  #ifdef CONFIG_ATMEL_NAND_HW_PMECC
> @@ -1522,6 +1525,9 @@ int atmel_nand_chip_init(int devnum, ulong base_addr)
>  	nand->dev_ready = at91_nand_ready;
>  #endif
>  	nand->chip_delay = 75;
> +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
> +	nand->bbt_options |= NAND_BBT_USE_FLASH;
> +#endif
>  
>  	ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL);
>  	if (ret)



-- 
Boris Brezillon, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com