From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tom Rini Date: Wed, 1 Apr 2015 07:27:07 -0400 Subject: [U-Boot] [RESEND PATCH 0/6] Add support for Colibri Vybrid Modules In-Reply-To: References: Message-ID: <20150401112707.GH9524@bill-the-cat> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Wed, Apr 01, 2015 at 03:24:17PM +0530, Sanchayan Maity wrote: > Hello, > > This patchset adds support for the Toradex Colibri Vybrid VF50 and VF61 > modules. Boot up has been tested using the serial loader over UART. > > First patch in the series refactors the DDR related code for use by both > the tower board and colibri modules. It also introduces a DDR3 based > JEDEC timing structure. > > Second third and fourth patch in this series are improvement patches > related to RTC, SoC/CPU detection and caches. > > Fifth patch introduces USB support for Vybrid modules. Much of the code > is similar to the ehci-mx6 driver. One open question here would be is > there a better way to take care of this similarity and perhaps share the > code base among the two drivers? Both host and client modes are working > and DFU has also been tested. Currently, we restrict the ports to be in > one of host and client mode. > > Sixth patch adds the actual support for the Colibri modules. > > Comments and feedback are most welcome. Aside from the minor comments, I'll take this after the release, thanks! -- Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: