From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753948AbbDBOiy (ORCPT ); Thu, 2 Apr 2015 10:38:54 -0400 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:39349 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753549AbbDBOis (ORCPT ); Thu, 2 Apr 2015 10:38:48 -0400 Date: Thu, 2 Apr 2015 16:38:46 +0200 From: Pavel Machek To: Andrew Morton , pali.rohar@gmail.com, sre@debian.org, sre@ring0.de, kernel list , linux-arm-kernel , linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com, galak@codeaurora.org, bcousson@baylibre.com, sakari.ailus@iki.fi, m.chehab@samsung.com, devicetree@vger.kernel.org Subject: [PATCHv3] media: i2c/adp1653: devicetree support for adp1653 Message-ID: <20150402143846.GA11687@amd> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org We are moving to device tree support on OMAP3, but that currently breaks ADP1653 driver. This adds device tree support, plus required documentation. Signed-off-by: Pavel Machek --- I'm not sure if it is device tree or media framework, either everyone waits for someone else, or noone really cares. Andrew, can you just merge it? Please apply, Pavel diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt new file mode 100644 index 0000000..0fc28a9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt @@ -0,0 +1,37 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain be "adi,adp1653" + + - reg: I2C slave address + + - gpios: References to the GPIO that controls the power for the chip. + +There are two led outputs available - flash and indicator. One led is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller@30 { + compatible = "adi,adp1653"; + reg = <0x30>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + indicator { + max-microamp = <17500>; + }; + }; diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 873fe19..0341009 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -8,6 +8,7 @@ * Contributors: * Sakari Ailus * Tuukka Toivonen + * Pavel Machek * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -34,6 +35,8 @@ #include #include #include +#include +#include #include #include @@ -306,9 +309,17 @@ adp1653_init_device(struct adp1653_flash *flash) static int __adp1653_set_power(struct adp1653_flash *flash, int on) { - int ret; + int ret = 0; + + if (flash->platform_data->power) { + ret = flash->platform_data->power(&flash->subdev, on); + } else { + gpio_set_value(flash->platform_data->power_gpio, on); + if (on) + /* Some delay is apparently required. */ + udelay(20); + } - ret = flash->platform_data->power(&flash->subdev, on); if (ret < 0) return ret; @@ -316,8 +327,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) return 0; ret = adp1653_init_device(flash); - if (ret < 0) + if (ret >= 0) + return ret; + + if (flash->platform_data->power) flash->platform_data->power(&flash->subdev, 0); + else + gpio_set_value(flash->platform_data->power_gpio, 0); return ret; } @@ -407,21 +423,77 @@ static int adp1653_resume(struct device *dev) #endif /* CONFIG_PM */ +static int adp1653_of_init(struct i2c_client *client, + struct adp1653_flash *flash, + struct device_node *node) +{ + u32 val; + struct adp1653_platform_data *pd; + enum of_gpio_flags flags; + int gpio; + struct device_node *child; + + if (!node) + return -EINVAL; + + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + flash->platform_data = pd; + + child = of_get_child_by_name(node, "flash"); + if (!child) + return -EINVAL; + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) + return -EINVAL; + + pd->max_flash_timeout = val; + if (of_property_read_u32(child, "flash-max-microamp", &val)) + return -EINVAL; + pd->max_flash_intensity = val/1000; + + if (of_property_read_u32(child, "max-microamp", &val)) + return -EINVAL; + pd->max_torch_intensity = val/1000; + + child = of_get_child_by_name(node, "indicator"); + if (!child) + return -EINVAL; + if (of_property_read_u32(child, "max-microamp", &val)) + return -EINVAL; + pd->max_indicator_intensity = val; + + if (!of_find_property(node, "gpios", NULL)) { + dev_err(&client->dev, "No gpio node\n"); + return -EINVAL; + } + + pd->power_gpio = of_get_gpio_flags(node, 0, &flags); + if (pd->power_gpio < 0) { + dev_err(&client->dev, "Error getting GPIO\n"); + return -EINVAL; + } + + return 0; +} + + static int adp1653_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct adp1653_flash *flash; int ret; - /* we couldn't work without platform data */ - if (client->dev.platform_data == NULL) - return -ENODEV; - flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); if (flash == NULL) return -ENOMEM; flash->platform_data = client->dev.platform_data; + if (!flash->platform_data) { + ret = adp1653_of_init(client, flash, client->dev.of_node); + if (ret) + return ret; + } mutex_init(&flash->power_lock); @@ -438,10 +510,10 @@ static int adp1653_probe(struct i2c_client *client, goto free_and_quit; flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; - return 0; free_and_quit: + dev_err(&client->dev, "adp1653: failed to register device\n"); v4l2_ctrl_handler_free(&flash->ctrls); return ret; } @@ -464,7 +536,7 @@ static const struct i2c_device_id adp1653_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, adp1653_id_table); -static struct dev_pm_ops adp1653_pm_ops = { +static const struct dev_pm_ops adp1653_pm_ops = { .suspend = adp1653_suspend, .resume = adp1653_resume, }; -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: pavel@ucw.cz (Pavel Machek) Date: Thu, 2 Apr 2015 16:38:46 +0200 Subject: [PATCHv3] media: i2c/adp1653: devicetree support for adp1653 Message-ID: <20150402143846.GA11687@amd> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org We are moving to device tree support on OMAP3, but that currently breaks ADP1653 driver. This adds device tree support, plus required documentation. Signed-off-by: Pavel Machek --- I'm not sure if it is device tree or media framework, either everyone waits for someone else, or noone really cares. Andrew, can you just merge it? Please apply, Pavel diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt new file mode 100644 index 0000000..0fc28a9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt @@ -0,0 +1,37 @@ +* Analog Devices ADP1653 flash LED driver + +Required Properties: + + - compatible: Must contain be "adi,adp1653" + + - reg: I2C slave address + + - gpios: References to the GPIO that controls the power for the chip. + +There are two led outputs available - flash and indicator. One led is +represented by one child node, nodes need to be named "flash" and "indicator". + +Required properties of the LED child node: +- max-microamp : see Documentation/devicetree/bindings/leds/common.txt + +Required properties of the flash LED child node: + +- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt +- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt + +Example: + + adp1653: led-controller at 30 { + compatible = "adi,adp1653"; + reg = <0x30>; + gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ + + flash { + flash-timeout-us = <500000>; + flash-max-microamp = <320000>; + max-microamp = <50000>; + }; + indicator { + max-microamp = <17500>; + }; + }; diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c index 873fe19..0341009 100644 --- a/drivers/media/i2c/adp1653.c +++ b/drivers/media/i2c/adp1653.c @@ -8,6 +8,7 @@ * Contributors: * Sakari Ailus * Tuukka Toivonen + * Pavel Machek * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -34,6 +35,8 @@ #include #include #include +#include +#include #include #include @@ -306,9 +309,17 @@ adp1653_init_device(struct adp1653_flash *flash) static int __adp1653_set_power(struct adp1653_flash *flash, int on) { - int ret; + int ret = 0; + + if (flash->platform_data->power) { + ret = flash->platform_data->power(&flash->subdev, on); + } else { + gpio_set_value(flash->platform_data->power_gpio, on); + if (on) + /* Some delay is apparently required. */ + udelay(20); + } - ret = flash->platform_data->power(&flash->subdev, on); if (ret < 0) return ret; @@ -316,8 +327,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on) return 0; ret = adp1653_init_device(flash); - if (ret < 0) + if (ret >= 0) + return ret; + + if (flash->platform_data->power) flash->platform_data->power(&flash->subdev, 0); + else + gpio_set_value(flash->platform_data->power_gpio, 0); return ret; } @@ -407,21 +423,77 @@ static int adp1653_resume(struct device *dev) #endif /* CONFIG_PM */ +static int adp1653_of_init(struct i2c_client *client, + struct adp1653_flash *flash, + struct device_node *node) +{ + u32 val; + struct adp1653_platform_data *pd; + enum of_gpio_flags flags; + int gpio; + struct device_node *child; + + if (!node) + return -EINVAL; + + pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + flash->platform_data = pd; + + child = of_get_child_by_name(node, "flash"); + if (!child) + return -EINVAL; + if (of_property_read_u32(child, "flash-timeout-microsec", &val)) + return -EINVAL; + + pd->max_flash_timeout = val; + if (of_property_read_u32(child, "flash-max-microamp", &val)) + return -EINVAL; + pd->max_flash_intensity = val/1000; + + if (of_property_read_u32(child, "max-microamp", &val)) + return -EINVAL; + pd->max_torch_intensity = val/1000; + + child = of_get_child_by_name(node, "indicator"); + if (!child) + return -EINVAL; + if (of_property_read_u32(child, "max-microamp", &val)) + return -EINVAL; + pd->max_indicator_intensity = val; + + if (!of_find_property(node, "gpios", NULL)) { + dev_err(&client->dev, "No gpio node\n"); + return -EINVAL; + } + + pd->power_gpio = of_get_gpio_flags(node, 0, &flags); + if (pd->power_gpio < 0) { + dev_err(&client->dev, "Error getting GPIO\n"); + return -EINVAL; + } + + return 0; +} + + static int adp1653_probe(struct i2c_client *client, const struct i2c_device_id *devid) { struct adp1653_flash *flash; int ret; - /* we couldn't work without platform data */ - if (client->dev.platform_data == NULL) - return -ENODEV; - flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL); if (flash == NULL) return -ENOMEM; flash->platform_data = client->dev.platform_data; + if (!flash->platform_data) { + ret = adp1653_of_init(client, flash, client->dev.of_node); + if (ret) + return ret; + } mutex_init(&flash->power_lock); @@ -438,10 +510,10 @@ static int adp1653_probe(struct i2c_client *client, goto free_and_quit; flash->subdev.entity.type = MEDIA_ENT_T_V4L2_SUBDEV_FLASH; - return 0; free_and_quit: + dev_err(&client->dev, "adp1653: failed to register device\n"); v4l2_ctrl_handler_free(&flash->ctrls); return ret; } @@ -464,7 +536,7 @@ static const struct i2c_device_id adp1653_id_table[] = { }; MODULE_DEVICE_TABLE(i2c, adp1653_id_table); -static struct dev_pm_ops adp1653_pm_ops = { +static const struct dev_pm_ops adp1653_pm_ops = { .suspend = adp1653_suspend, .resume = adp1653_resume, }; -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html