All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: deepak.s@linux.intel.com
Cc: daniel.vetter@ffwll.ch, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH v4] drm/i915/chv: Set min freq to efficient frequency on chv
Date: Fri, 8 May 2015 19:39:36 +0300	[thread overview]
Message-ID: <20150508163936.GJ18908@intel.com> (raw)
In-Reply-To: <1431097992-18204-3-git-send-email-deepak.s@linux.intel.com>

On Fri, May 08, 2015 at 08:43:12PM +0530, deepak.s@linux.intel.com wrote:
> From: Deepak S <deepak.s@linux.intel.com>
> 
> After feedback from the hardware team, now we set the GPU min/idel freq to RPe.
> Punit is expecting us to operate GPU between Rpe & Rp0. If we drop the
> frequency to RPn, punit is failing to change the input voltage to
> minimum :(

As I mentioned I've been unable to reproduce that particular problem
on my BSW. Perhaps add a note about that in the commit message.

> 
> Since Punit validates the rps range [RPe, RP0]. This patch
> removes unused cherryview_rps_min_freq function.

But I can accept that we should stick to the validated range, so I
can slap an r-b on the patch anyway:
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>

> 
> v2: Change commit message
> 
> v3: set min_freq before idle_freq (chris)
> 
> v4: Squash 'Remove unused rps min function' patch
> 
> Signed-off-by: Deepak S <deepak.s@linux.intel.com>
> Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
> ---
>  drivers/gpu/drm/i915/intel_pm.c | 21 ++-------------------
>  1 file changed, 2 insertions(+), 19 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index 852f756..b6b14a4 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4689,24 +4689,6 @@ static int cherryview_rps_guar_freq(struct drm_i915_private *dev_priv)
>  	return rp1;
>  }
>  
> -static int cherryview_rps_min_freq(struct drm_i915_private *dev_priv)
> -{
> -	struct drm_device *dev = dev_priv->dev;
> -	u32 val, rpn;
> -
> -	if (dev->pdev->revision >= 0x20) {
> -		val = vlv_punit_read(dev_priv, FB_GFX_FMIN_AT_VMIN_FUSE);
> -		rpn = ((val >> FB_GFX_FMIN_AT_VMIN_FUSE_SHIFT) &
> -		       FB_GFX_FREQ_FUSE_MASK);
> -	} else { /* For pre-production hardware */
> -		val = vlv_punit_read(dev_priv, PUNIT_GPU_STATUS_REG);
> -		rpn = ((val >> PUNIT_GPU_STATIS_GFX_MIN_FREQ_SHIFT) &
> -		       PUNIT_GPU_STATUS_GFX_MIN_FREQ_MASK);
> -	}
> -
> -	return rpn;
> -}
> -
>  static int valleyview_rps_guar_freq(struct drm_i915_private *dev_priv)
>  {
>  	u32 val, rp1;
> @@ -4958,7 +4940,8 @@ static void cherryview_init_gt_powersave(struct drm_device *dev)
>  			 intel_gpu_freq(dev_priv, dev_priv->rps.rp1_freq),
>  			 dev_priv->rps.rp1_freq);
>  
> -	dev_priv->rps.min_freq = cherryview_rps_min_freq(dev_priv);
> +	/* PUnit validated range is only [RPe, RP0] */
> +	dev_priv->rps.min_freq = dev_priv->rps.efficient_freq;
>  	DRM_DEBUG_DRIVER("min GPU freq: %d MHz (%u)\n",
>  			 intel_gpu_freq(dev_priv, dev_priv->rps.min_freq),
>  			 dev_priv->rps.min_freq);
> -- 
> 1.9.1

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2015-05-08 16:39 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-08 15:13 [PATCH v2 1/2] drm/i915/vlv: Remove wait for for punit to updates freq deepak.s
2015-05-08 15:13 ` [PATCH v2 2/2] drm/i915/chv: Extend set idle rps wa to chv deepak.s
2015-05-08 16:36   ` Ville Syrjälä
2015-05-09 12:41     ` [PATCH v2] " deepak.s
2015-05-09 10:32   ` [PATCH v2 2/2] " shuang.he
2015-05-08 15:13 ` [PATCH v4] drm/i915/chv: Set min freq to efficient frequency on chv deepak.s
2015-05-08 15:24   ` shuang.he
2015-05-08 16:39   ` Ville Syrjälä [this message]
2015-05-09  5:34     ` Deepak S
2015-05-09 12:45       ` deepak.s
2015-05-11 10:23         ` Daniel Vetter
2015-05-11 11:06       ` Ville Syrjälä
2015-05-08 16:34 ` [PATCH v2 1/2] drm/i915/vlv: Remove wait for for punit to updates freq Ville Syrjälä
2015-05-09  5:30   ` Deepak S
2015-05-09 12:34     ` [PATCH v3] " deepak.s
2015-05-09 19:19       ` shuang.he
  -- strict thread matches above, loose matches on Subject: below --
2015-03-28  9:53 [PATCH v3 3/5] drm/i915/chv: Set min freq to efficient frequency on chv deepak.s
2015-04-29  2:53 ` [PATCH v4] " deepak.s
2015-04-29 15:31   ` Ville Syrjälä
2015-04-29 19:53     ` Ville Syrjälä
2015-04-30 10:12       ` Deepak S
2015-04-30 11:19         ` Ville Syrjälä
2015-04-30 14:05           ` Ville Syrjälä
2015-05-02  7:26             ` Deepak S
2015-04-30  2:42   ` shuang.he
2015-05-04  8:04   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150508163936.GJ18908@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=deepak.s@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.