All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joe MacDonald <Joe_MacDonald@mentor.com>
To: Rongqing Li <rongqing.li@windriver.com>
Cc: openembedded-devel@lists.openembedded.org
Subject: Re: [PATCH][meta-networking][v3] squid: upgrade to 3.5.5
Date: Tue, 1 Sep 2015 09:31:53 -0400	[thread overview]
Message-ID: <20150901133153.GA21369@mentor.com> (raw)
In-Reply-To: <55E5565B.5050308@windriver.com>

[-- Attachment #1: Type: text/plain, Size: 6817 bytes --]

[Re: [oe] [PATCH][meta-networking][v3] squid: upgrade to 3.5.5] On 15.09.01 (Tue 15:40) Rongqing Li wrote:

> ping

I marked this patch rejected in patchworks after asking about the PAM
dependency, I encourage everyone to check the state of any patch there
as that's my primary workflow now since I know that's also the
management system Martin uses and I want to make the coordination as
easy as possible.

I initially missed your follow up because it was after the unrelated
comment about a queue of patches that'd recently been merged.

Your response was that there was no configuration option to disable PAM
after you looked at the code.  I had a quick look through and the issue
is more complicated than that.  There absolutely is a way to turn off
building the PAM module (see --enable-auth-basic) but that will only
address one of a large number of potential QA issues, now that I look at
it.  The default will also depend on LDAP, NIS, SASL, RADIUS and so on.

I think the correct solution for this would be to have each of the
helpers optionally enabled based on what your image contains
(PKGCONFIG/DISTRO_FEATURES maybe) but for now it's probably okay to
remove the dependency and re-submit something like below without change
#5.  Please also have another look at the error from the world builds to
see if we need to either blacklist Squid or if there's a 'insane'
workaround that'll squelch the error until we get it cleaned up
properly.

Then on the upgrade to 3.5.7 (the current stable) we'll want to do
something cleaner.

-J.

> 
> -Roy
> 
> On 2015年07月07日 09:55, rongqing.li@windriver.com wrote:
> >From: Roy Li <rongqing.li@windriver.com>
> >
> >1. Remove the squid-change-ksh-referen*.patch which is not needed, since
> >    3.5.5 did not use ksh by default.
> >2. Update the checksum of COPYING,since the date in it has been changed.
> >3. Define BUILDCXXFLAGS, otherwise the target gcc options -std=c++11 will
> >    add into it, and lead to building failure since host gcc maybe not
> >    support "-std=c++11"
> >4. Assume to support GNU atomic operations by default, the running check
> >    on cross-compile setup does not work
> >5. Add the dependency on libpam
> >
> >Signed-off-by: Roy Li <rongqing.li@windriver.com>
> >---
> >  ...ge-ksh-reference-in-krb-ldap-helper-to-sh.patch | 39 ----------------------
> >  .../squid/{squid_3.4.7.bb => squid_3.5.5.bb}       | 11 +++---
> >  2 files changed, 6 insertions(+), 44 deletions(-)
> >  delete mode 100644 meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
> >  rename meta-networking/recipes-daemons/squid/{squid_3.4.7.bb => squid_3.5.5.bb} (86%)
> >
> >diff --git a/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch b/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
> >deleted file mode 100644
> >index 8e03860..0000000
> >--- a/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
> >+++ /dev/null
> >@@ -1,39 +0,0 @@
> >-squid: change ksh reference in krb ldap helper to sh
> >-
> >-Very simple cert_tool script with no ksh specifics.
> >-Change it to use sh so a package dependency doesn't
> >-get created to ksh.
> >-
> >-Upstream-Status: Pending
> >-
> >-Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
> >-Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
> >----
> >- helpers/external_acl/kerberos_ldap_group/cert_tool | 6 +++---
> >- 1 file changed, 3 insertions(+), 3 deletions(-)
> >-
> >-diff --git a/helpers/external_acl/kerberos_ldap_group/cert_tool b/helpers/external_acl/kerberos_ldap_group/cert_tool
> >-index 9f14959..8c4ea11 100644
> >---- a/helpers/external_acl/kerberos_ldap_group/cert_tool
> >-+++ b/helpers/external_acl/kerberos_ldap_group/cert_tool
> >-@@ -1,4 +1,4 @@
> >--#!/bin/ksh
> >-+#!/bin/sh
> >- #
> >- #  -----------------------------------------------------------------------------
> >- #
> >-@@ -64,9 +64,9 @@ QUIT
> >- # Create database for Sun ldap and pem file for Openldap
> >- #
> >- rm ${server}_[0-9]*.pem 2>/dev/null
> >--let i=0
> >-+i=0
> >-  ls ${server}_[0-9]*.cert | while read file; do
> >-- let i=i+1
> >-+ i=`expr $i + 1`
> >-  cat  $file  >> ${server}_$i.pem
> >-  CA=`openssl x509 -noout -text -in  ${server}_$i.pem | grep -i "CA:.*true"`
> >-  if [ -n "$CA" ]; then
> >---
> >-1.9.1
> >-
> >diff --git a/meta-networking/recipes-daemons/squid/squid_3.4.7.bb b/meta-networking/recipes-daemons/squid/squid_3.5.5.bb
> >similarity index 86%
> >rename from meta-networking/recipes-daemons/squid/squid_3.4.7.bb
> >rename to meta-networking/recipes-daemons/squid/squid_3.5.5.bb
> >index 7b00dfc..198319d 100644
> >--- a/meta-networking/recipes-daemons/squid/squid_3.4.7.bb
> >+++ b/meta-networking/recipes-daemons/squid/squid_3.5.5.bb
> >@@ -16,19 +16,18 @@ SRC_URI = "http://www.squid-cache.org/Versions/v${MAJ_VER}/${MIN_VER}/${BPN}-${P
> >             file://Set-up-for-cross-compilation.patch \
> >             file://Skip-AC_RUN_IFELSE-tests.patch \
> >             file://Fix-flawed-dynamic-ldb-link-test-in-configure.patch \
> >-           file://squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch \
> >             file://squid-use-serial-tests-config-needed-by-ptest.patch \
> >             file://run-ptest \
> >             file://volatiles.03_squid \
> >  "
> >
> >  LIC_FILES_CHKSUM = "file://COPYING;md5=c492e2d6d32ec5c1aad0e0609a141ce9 \
> >-                    file://COPYRIGHT;md5=2900f50789c498be8e9f1eb23b55cbe9 \
> >+                    file://errors/COPYRIGHT;md5=0fed8f1462f6fdbc62bb431bcb618f46 \
> >                     "
> >-SRC_URI[md5sum] = "9951034b10f7ee0f45a95cfae61c57c2"
> >-SRC_URI[sha256sum] = "7b423f3d3495a317503ca559ea535f80445fd7c4e3c3e268cb7a8c97c61af2b6"
> >+SRC_URI[md5sum] = "6aac5c2e9cbbeabcbf2e9e49a178a931"
> >+SRC_URI[sha256sum] = "741c24a307c50f0d845d53cabb66b36d91ce9a73c8a165eae5def5e4d11e6a0d"
> >
> >-DEPENDS = "libtool krb5 openldap db cyrus-sasl"
> >+DEPENDS = "libtool krb5 openldap db cyrus-sasl libpam"
> >
> >  inherit autotools useradd ptest
> >
> >@@ -38,6 +37,8 @@ USERADD_PARAM_${PN} = "--system --no-create-home --home-dir /var/run/squid --she
> >  PACKAGECONFIG ??= ""
> >  PACKAGECONFIG[libnetfilter-conntrack] = "--with-netfilter-conntrack=${includedir}, --without-netfilter-conntrack, libnetfilter-conntrack"
> >  EXTRA_OECONF += "--with-default-user=squid"
> >+export BUILDCXXFLAGS="${BUILD_CXXFLAGS}"
> >+CACHED_CONFIGUREVARS += "squid_cv_gnu_atomics=yes"
> >
> >  TESTDIR = "test-suite"
> >  do_compile_ptest() {
> >
> 
-- 
-Joe MacDonald.
:wq

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 484 bytes --]

  reply	other threads:[~2015-09-01 13:32 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-07  1:55 [PATCH][meta-networking][v3] squid: upgrade to 3.5.5 rongqing.li
2015-07-31  1:16 ` Rongqing Li
2015-08-06 14:56   ` Joe MacDonald
2015-08-07  2:43     ` Rongqing Li
2015-08-07 13:53       ` Joe MacDonald
2015-09-01  7:40 ` Rongqing Li
2015-09-01 13:31   ` Joe MacDonald [this message]
2015-09-06  1:52     ` Rongqing Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150901133153.GA21369@mentor.com \
    --to=joe_macdonald@mentor.com \
    --cc=openembedded-devel@lists.openembedded.org \
    --cc=rongqing.li@windriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.