All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Pavel Machek <pavel@ucw.cz>
Cc: Rafael Wysocki <rjw@rjwysocki.net>,
	sboyd@codeaurora.org, linaro-kernel@lists.linaro.org,
	linux-pm@vger.kernel.org, nm@ti.com, khilman@linaro.org,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Len Brown <len.brown@intel.com>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_
Date: Wed, 2 Sep 2015 12:52:38 +0530	[thread overview]
Message-ID: <20150902072238.GC22673@linux> (raw)
In-Reply-To: <20150901190321.GA6123@amd>

On 01-09-15, 21:03, Pavel Machek wrote:
> Is ..._free_table opposite of ..._init_opp? If so, you might want to
> name them such that it is clear...

Yes, it is opposite of that. Okay, so here is a new patch for this,
lemme know if this looks fine. I will then resend the whole series
again..

@Stephen: Thanks for your reviews, just few more to go (in this
series) :).


Message-Id: <b654f08cfa6d8ed0a6d214e9d4671652aa3842f1.1441178442.git.viresh.kumar@linaro.org>
From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Wed, 2 Sep 2015 11:23:44 +0530
Subject: [PATCH 1/3] PM / OPP: Rename opp init/free table routines

free-table routines are opposite of init-table ones, and must be named
to make that clear. Opposite of 'init' is 'exit', but those doesn't suit
really well.

Replace 'init' with 'add' and 'free' with 'remove'.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-imx/mach-imx6q.c       |  2 +-
 drivers/base/power/opp.c             | 41 ++++++++++++++++++------------------
 drivers/cpufreq/arm_big_little.h     |  2 +-
 drivers/cpufreq/arm_big_little_dt.c  |  4 ++--
 drivers/cpufreq/cpufreq-dt.c         |  6 +++---
 drivers/cpufreq/exynos5440-cpufreq.c |  6 +++---
 drivers/cpufreq/imx6q-cpufreq.c      |  6 +++---
 drivers/cpufreq/mt8173-cpufreq.c     |  6 +++---
 include/linux/pm_opp.h               | 16 +++++++-------
 9 files changed, 44 insertions(+), 45 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 9602cc12d2f1..3286eec91d92 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -350,7 +350,7 @@ static void __init imx6q_opp_init(void)
 		return;
 	}
 
-	if (of_init_opp_table(cpu_dev)) {
+	if (of_add_opp_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;
 	}
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 4741fdc13e83..1515c05bc579 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -800,8 +800,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
  * The opp is made available by default and it can be controlled using
  * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove.
  *
- * NOTE: "dynamic" parameter impacts OPPs added by the of_init_opp_table and
- * freed by of_free_opp_table.
+ * NOTE: "dynamic" parameter impacts OPPs added by the of_add_opp_table and
+ * freed by of_remove_opp_table.
  *
  * Locking: The internal device_opp and opp structures are RCU protected.
  * Hence this function internally uses RCU updater strategy with mutex locks
@@ -1185,7 +1185,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
 
 #ifdef CONFIG_OF
 /**
- * of_free_opp_table() - Free OPP table entries created from static DT entries
+ * of_remove_opp_table() - Free OPP table entries created from static DT entries
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Free OPPs created using static entries present in DT.
@@ -1196,7 +1196,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-void of_free_opp_table(struct device *dev)
+void of_remove_opp_table(struct device *dev)
 {
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *opp, *tmp;
@@ -1231,9 +1231,9 @@ void of_free_opp_table(struct device *dev)
 unlock:
 	mutex_unlock(&dev_opp_list_lock);
 }
-EXPORT_SYMBOL_GPL(of_free_opp_table);
+EXPORT_SYMBOL_GPL(of_remove_opp_table);
 
-void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu;
@@ -1248,10 +1248,10 @@ void of_cpumask_free_opp_table(cpumask_var_t cpumask)
 			continue;
 		}
 
-		of_free_opp_table(cpu_dev);
+		of_remove_opp_table(cpu_dev);
 	}
 }
-EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
+EXPORT_SYMBOL_GPL(of_cpumask_remove_opp_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
@@ -1267,8 +1267,7 @@ static struct device_node *_of_get_opp_desc_node(struct device *dev)
 }
 
 /* Initializes OPP tables based on new bindings */
-static int _of_init_opp_table_v2(struct device *dev,
-				 struct device_node *opp_np)
+static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 {
 	struct device_node *np;
 	struct device_opp *dev_opp;
@@ -1310,13 +1309,13 @@ static int _of_init_opp_table_v2(struct device *dev,
 	return 0;
 
 free_table:
-	of_free_opp_table(dev);
+	of_remove_opp_table(dev);
 
 	return ret;
 }
 
 /* Initializes OPP tables based on old-deprecated bindings */
-static int _of_init_opp_table_v1(struct device *dev)
+static int _of_add_opp_table_v1(struct device *dev)
 {
 	const struct property *prop;
 	const __be32 *val;
@@ -1353,7 +1352,7 @@ static int _of_init_opp_table_v1(struct device *dev)
 }
 
 /**
- * of_init_opp_table() - Initialize opp table from device tree
+ * of_add_opp_table() - Initialize opp table from device tree
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Register the initial OPP table with the OPP library for given device.
@@ -1375,7 +1374,7 @@ static int _of_init_opp_table_v1(struct device *dev)
  * -ENODATA	when empty 'operating-points' property is found
  * -EINVAL	when invalid entries are found in opp-v2 table
  */
-int of_init_opp_table(struct device *dev)
+int of_add_opp_table(struct device *dev)
 {
 	struct device_node *opp_np;
 	int ret;
@@ -1390,17 +1389,17 @@ int of_init_opp_table(struct device *dev)
 		 * Try old-deprecated bindings for backward compatibility with
 		 * older dtbs.
 		 */
-		return _of_init_opp_table_v1(dev);
+		return _of_add_opp_table_v1(dev);
 	}
 
-	ret = _of_init_opp_table_v2(dev, opp_np);
+	ret = _of_add_opp_table_v2(dev, opp_np);
 	of_node_put(opp_np);
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_init_opp_table);
+EXPORT_SYMBOL_GPL(of_add_opp_table);
 
-int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+int of_cpumask_add_opp_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu, ret = 0;
@@ -1415,20 +1414,20 @@ int of_cpumask_init_opp_table(cpumask_var_t cpumask)
 			continue;
 		}
 
-		ret = of_init_opp_table(cpu_dev);
+		ret = of_add_opp_table(cpu_dev);
 		if (ret) {
 			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
 			       __func__, cpu, ret);
 
 			/* Free all other OPPs */
-			of_cpumask_free_opp_table(cpumask);
+			of_cpumask_remove_opp_table(cpumask);
 			break;
 		}
 	}
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table);
+EXPORT_SYMBOL_GPL(of_cpumask_add_opp_table);
 
 /* Required only for V1 bindings, as v2 can manage it from DT itself */
 int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h
index a211f7db9d32..d7ac320ead23 100644
--- a/drivers/cpufreq/arm_big_little.h
+++ b/drivers/cpufreq/arm_big_little.h
@@ -28,7 +28,7 @@ struct cpufreq_arm_bL_ops {
 
 	/*
 	 * This must set opp table for cpu_dev in a similar way as done by
-	 * of_init_opp_table().
+	 * of_add_opp_table().
 	 */
 	int (*init_opp_table)(struct device *cpu_dev);
 
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 36d91dba2965..47ac0ff54e3a 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -54,7 +54,7 @@ static int dt_init_opp_table(struct device *cpu_dev)
 		return -ENOENT;
 	}
 
-	ret = of_init_opp_table(cpu_dev);
+	ret = of_add_opp_table(cpu_dev);
 	of_node_put(np);
 
 	return ret;
@@ -82,7 +82,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = {
 	.name	= "dt-bl",
 	.get_transition_latency = dt_get_transition_latency,
 	.init_opp_table = dt_init_opp_table,
-	.free_opp_table = of_free_opp_table,
+	.free_opp_table = of_remove_opp_table,
 };
 
 static int generic_bL_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c3583cdfadbd..9118a6562644 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -237,7 +237,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 *
 	 * OPPs might be populated at runtime, don't check for error here
 	 */
-	of_cpumask_init_opp_table(policy->cpus);
+	of_cpumask_add_opp_table(policy->cpus);
 
 	if (need_update) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
@@ -356,7 +356,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 out_free_priv:
 	kfree(priv);
 out_free_opp:
-	of_cpumask_free_opp_table(policy->cpus);
+	of_cpumask_remove_opp_table(policy->cpus);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -373,7 +373,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	of_cpumask_free_opp_table(policy->related_cpus);
+	of_cpumask_remove_opp_table(policy->related_cpus);
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index 21a90ed7f3d8..fc46813d3b83 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -360,7 +360,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 		goto err_put_node;
 	}
 
-	ret = of_init_opp_table(dvfs_info->dev);
+	ret = of_add_opp_table(dvfs_info->dev);
 	if (ret) {
 		dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
 		goto err_put_node;
@@ -424,7 +424,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 err_free_table:
 	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
 err_free_opp:
-	of_free_opp_table(dvfs_info->dev);
+	of_remove_opp_table(dvfs_info->dev);
 err_put_node:
 	of_node_put(np);
 	dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
@@ -435,7 +435,7 @@ static int exynos_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&exynos_driver);
 	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
-	of_free_opp_table(dvfs_info->dev);
+	of_remove_opp_table(dvfs_info->dev);
 	return 0;
 }
 
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 380a90d3c57e..3802765aeb9f 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -202,7 +202,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	 */
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
-		ret = of_init_opp_table(cpu_dev);
+		ret = of_add_opp_table(cpu_dev);
 		if (ret < 0) {
 			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
 			goto put_reg;
@@ -312,7 +312,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 out_free_opp:
 	if (free_opp)
-		of_free_opp_table(cpu_dev);
+		of_remove_opp_table(cpu_dev);
 put_reg:
 	if (!IS_ERR(arm_reg))
 		regulator_put(arm_reg);
@@ -340,7 +340,7 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
 	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 	if (free_opp)
-		of_free_opp_table(cpu_dev);
+		of_remove_opp_table(cpu_dev);
 	regulator_put(arm_reg);
 	if (!IS_ERR(pu_reg))
 		regulator_put(pu_reg);
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index 49caed293a3b..519e83146e86 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -344,7 +344,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	/* Both presence and absence of sram regulator are valid cases. */
 	sram_reg = regulator_get_exclusive(cpu_dev, "sram");
 
-	ret = of_init_opp_table(cpu_dev);
+	ret = of_add_opp_table(cpu_dev);
 	if (ret) {
 		pr_warn("no OPP table for cpu%d\n", cpu);
 		goto out_free_resources;
@@ -378,7 +378,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	return 0;
 
 out_free_opp_table:
-	of_free_opp_table(cpu_dev);
+	of_remove_opp_table(cpu_dev);
 
 out_free_resources:
 	if (!IS_ERR(proc_reg))
@@ -404,7 +404,7 @@ static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
 	if (!IS_ERR(info->inter_clk))
 		clk_put(info->inter_clk);
 
-	of_free_opp_table(info->cpu_dev);
+	of_remove_opp_table(info->cpu_dev);
 }
 
 static int mtk_cpufreq_init(struct cpufreq_policy *policy)
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index cab7ba55bedb..5b6243014f8a 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -126,28 +126,28 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-int of_init_opp_table(struct device *dev);
-void of_free_opp_table(struct device *dev);
-int of_cpumask_init_opp_table(cpumask_var_t cpumask);
-void of_cpumask_free_opp_table(cpumask_var_t cpumask);
+int of_add_opp_table(struct device *dev);
+void of_remove_opp_table(struct device *dev);
+int of_cpumask_add_opp_table(cpumask_var_t cpumask);
+void of_cpumask_remove_opp_table(cpumask_var_t cpumask);
 int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
 int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
 #else
-static inline int of_init_opp_table(struct device *dev)
+static inline int of_add_opp_table(struct device *dev)
 {
 	return -EINVAL;
 }
 
-static inline void of_free_opp_table(struct device *dev)
+static inline void of_remove_opp_table(struct device *dev)
 {
 }
 
-static inline int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+static inline int of_cpumask_add_opp_table(cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+static inline void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
 {
 }

  reply	other threads:[~2015-09-02  7:22 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-01  4:58 [PATCH V2 Resend 0/5] PM / OPP: Add debugfs support Viresh Kumar
2015-09-01  4:58 ` [PATCH V2 Resend 1/5] PM / OPP: reuse of_parse_phandle() Viresh Kumar
2015-09-01  4:58   ` Viresh Kumar
2015-09-01 22:48   ` Stephen Boyd
2015-09-01  4:58 ` [PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_ Viresh Kumar
2015-09-01  4:58   ` Viresh Kumar
2015-09-01 19:03   ` Pavel Machek
2015-09-02  7:22     ` Viresh Kumar [this message]
2015-09-02  7:25       ` Viresh Kumar
2015-09-03  0:00         ` Stephen Boyd
2015-09-01  4:58 ` [PATCH V2 Resend 3/5] PM / OPP: Move opp core to its own directory Viresh Kumar
2015-09-01  4:58   ` Viresh Kumar
2015-09-01 22:51   ` Stephen Boyd
2015-09-02  7:13     ` Viresh Kumar
2015-09-01  4:58 ` [PATCH V2 Resend 4/5] PM / OPP: Move cpu specific code to opp/cpu.c Viresh Kumar
2015-09-01  4:58   ` Viresh Kumar
2015-09-01  4:58 ` [PATCH V2 Resend 5/5] PM / OPP: Add debugfs support Viresh Kumar
2015-09-01  4:58   ` Viresh Kumar
2015-09-01 23:00   ` Stephen Boyd
2015-09-03  1:05 ` [PATCH V2 Resend 0/5] " Rafael J. Wysocki
2015-09-03  4:32   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150902072238.GC22673@linux \
    --to=viresh.kumar@linaro.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@linaro.org \
    --cc=len.brown@intel.com \
    --cc=linaro-kernel@lists.linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pavel@ucw.cz \
    --cc=rjw@rjwysocki.net \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.