From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965202AbbKEWXe (ORCPT ); Thu, 5 Nov 2015 17:23:34 -0500 Received: from bh-25.webhostbox.net ([208.91.199.152]:38689 "EHLO bh-25.webhostbox.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932265AbbKEWXc (ORCPT ); Thu, 5 Nov 2015 17:23:32 -0500 Date: Thu, 5 Nov 2015 14:23:25 -0800 From: Guenter Roeck To: Akshay Bhat Cc: linux-watchdog@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, wim@iguana.be, tharvey@gateworks.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, shawnguo@kernel.org, kernel@pengutronix.de, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org, justin.waters@timesys.com, l.stach@pengutronix.de, festevam@gmail.com, sr@denx.de Subject: Re: [PATCH v4 1/2] watchdog: imx2_wdt: add external reset support via 'ext-reset-output' dt prop Message-ID: <20151105222325.GA26159@roeck-us.net> References: <1446758362-11702-1-git-send-email-akshay.bhat@timesys.com> <1446758362-11702-2-git-send-email-akshay.bhat@timesys.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1446758362-11702-2-git-send-email-akshay.bhat@timesys.com> User-Agent: Mutt/1.5.23 (2014-03-12) X-Authenticated_sender: guenter@roeck-us.net X-OutGoing-Spam-Status: No, score=-1.0 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - bh-25.webhostbox.net X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - roeck-us.net X-Get-Message-Sender-Via: bh-25.webhostbox.net: authenticated_id: guenter@roeck-us.net X-Source: X-Source-Args: X-Source-Dir: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Nov 05, 2015 at 04:19:21PM -0500, Akshay Bhat wrote: > From: Tim Harvey > > The IMX6 watchdog supports assertion of a signal (WDOG_B) which > can be pinmux'd to an external pin. This is typically used for boards that > have PMIC's in control of the IMX6 power rails. In fact, failure to use > such an external reset on boards with external PMIC's can result in various > hangs due to the IMX6 not being fully reset [1] as well as the board failing > to reset because its PMIC has not been reset to provide adequate voltage for > the CPU when coming out of reset at 800Mhz. > > This uses a new device-tree property 'ext-reset-output' to indicate the > board has such a reset and to cause the watchdog to be configured to assert > WDOG_B instead of an internal reset both on a watchdog timeout and in > system_restart. > > [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/333689.html > > Cc: Lucas Stach > Signed-off-by: Tim Harvey > --- > .../devicetree/bindings/watchdog/fsl-imx-wdt.txt | 2 ++ > drivers/watchdog/imx2_wdt.c | 20 ++++++++++++++++++-- > 2 files changed, 20 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > index 8dab6fd..9b89b3a 100644 > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > @@ -9,6 +9,8 @@ Optional property: properties ? > - big-endian: If present the watchdog device's registers are implemented > in big endian mode, otherwise in native mode(same with CPU), for more > detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. > +- ext-reset-output: If present the watchdog device is configured to assert its Should that have a vendor prefix ? Also, not sure if "-output" has any real value in the property name. "fsl,external-reset", maybe ? > + external reset (WDOG_B) instead of issuing a software reset. > > Examples: > > diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c > index 29ef719..84bfec4 100644 > --- a/drivers/watchdog/imx2_wdt.c > +++ b/drivers/watchdog/imx2_wdt.c > @@ -41,6 +41,8 @@ > > #define IMX2_WDT_WCR 0x00 /* Control Register */ > #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ > +#define IMX2_WDT_WCR_WDA (1 << 5) /* -> External Reset WDOG_B */ > +#define IMX2_WDT_WCR_SRS (1 << 4) /* -> Software Reset Signal */ > #define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ > #define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ > #define IMX2_WDT_WCR_WDZST (1 << 0) /* -> Watchdog timer Suspend */ > @@ -65,6 +67,7 @@ struct imx2_wdt_device { > struct timer_list timer; /* Pings the watchdog when closed */ > struct watchdog_device wdog; > struct notifier_block restart_handler; > + bool ext_reset; > }; > > static bool nowayout = WATCHDOG_NOWAYOUT; > @@ -90,6 +93,13 @@ static int imx2_restart_handler(struct notifier_block *this, unsigned long mode, > struct imx2_wdt_device *wdev = container_of(this, > struct imx2_wdt_device, > restart_handler); > + > + /* Use internal reset or external - not both */ > + if (wdev->ext_reset) > + wcr_enable |= IMX2_WDT_WCR_SRS; /* do not assert int reset */ > + else > + wcr_enable |= IMX2_WDT_WCR_WDA; /* do not assert ext-reset */ > + > /* Assert SRS signal */ > regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable); > /* > @@ -119,8 +129,12 @@ static inline void imx2_wdt_setup(struct watchdog_device *wdog) > val |= IMX2_WDT_WCR_WDZST; > /* Strip the old watchdog Time-Out value */ > val &= ~IMX2_WDT_WCR_WT; > - /* Generate reset if WDOG times out */ > - val &= ~IMX2_WDT_WCR_WRE; > + /* Generate internal chip-level reset if WDOG times out */ > + if (!wdev->ext_reset) > + val &= ~IMX2_WDT_WCR_WRE; > + /* Or if external-reset assert WDOG_B reset only on time-out */ > + else > + val |= IMX2_WDT_WCR_WRE; I don't really understand what this means. Normally I would hope that a watchdog only generates a reset if/when it times out. > /* Keep Watchdog Disabled */ > val &= ~IMX2_WDT_WCR_WDE; > /* Set the watchdog's Time-Out value */ > @@ -267,6 +281,8 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) > regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val); > wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0; > > + wdev->ext_reset = of_property_read_bool(pdev->dev.of_node, > + "ext-reset-output"); > wdog->timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); > if (wdog->timeout != timeout) > dev_warn(&pdev->dev, "Initial timeout out of range! Clamped from %u to %u\n", > -- > 2.6.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: Guenter Roeck Subject: Re: [PATCH v4 1/2] watchdog: imx2_wdt: add external reset support via 'ext-reset-output' dt prop Date: Thu, 5 Nov 2015 14:23:25 -0800 Message-ID: <20151105222325.GA26159@roeck-us.net> References: <1446758362-11702-1-git-send-email-akshay.bhat@timesys.com> <1446758362-11702-2-git-send-email-akshay.bhat@timesys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1446758362-11702-2-git-send-email-akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org> Sender: linux-watchdog-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Akshay Bhat Cc: linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, pawel.moll-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org, tharvey-UMMOYl/HMS+akBO8gow8eQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, justin.waters-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org, l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, sr-ynQEQJNshbs@public.gmane.org List-Id: devicetree@vger.kernel.org On Thu, Nov 05, 2015 at 04:19:21PM -0500, Akshay Bhat wrote: > From: Tim Harvey > > The IMX6 watchdog supports assertion of a signal (WDOG_B) which > can be pinmux'd to an external pin. This is typically used for boards that > have PMIC's in control of the IMX6 power rails. In fact, failure to use > such an external reset on boards with external PMIC's can result in various > hangs due to the IMX6 not being fully reset [1] as well as the board failing > to reset because its PMIC has not been reset to provide adequate voltage for > the CPU when coming out of reset at 800Mhz. > > This uses a new device-tree property 'ext-reset-output' to indicate the > board has such a reset and to cause the watchdog to be configured to assert > WDOG_B instead of an internal reset both on a watchdog timeout and in > system_restart. > > [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/333689.html > > Cc: Lucas Stach > Signed-off-by: Tim Harvey > --- > .../devicetree/bindings/watchdog/fsl-imx-wdt.txt | 2 ++ > drivers/watchdog/imx2_wdt.c | 20 ++++++++++++++++++-- > 2 files changed, 20 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > index 8dab6fd..9b89b3a 100644 > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > @@ -9,6 +9,8 @@ Optional property: properties ? > - big-endian: If present the watchdog device's registers are implemented > in big endian mode, otherwise in native mode(same with CPU), for more > detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. > +- ext-reset-output: If present the watchdog device is configured to assert its Should that have a vendor prefix ? Also, not sure if "-output" has any real value in the property name. "fsl,external-reset", maybe ? > + external reset (WDOG_B) instead of issuing a software reset. > > Examples: > > diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c > index 29ef719..84bfec4 100644 > --- a/drivers/watchdog/imx2_wdt.c > +++ b/drivers/watchdog/imx2_wdt.c > @@ -41,6 +41,8 @@ > > #define IMX2_WDT_WCR 0x00 /* Control Register */ > #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ > +#define IMX2_WDT_WCR_WDA (1 << 5) /* -> External Reset WDOG_B */ > +#define IMX2_WDT_WCR_SRS (1 << 4) /* -> Software Reset Signal */ > #define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ > #define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ > #define IMX2_WDT_WCR_WDZST (1 << 0) /* -> Watchdog timer Suspend */ > @@ -65,6 +67,7 @@ struct imx2_wdt_device { > struct timer_list timer; /* Pings the watchdog when closed */ > struct watchdog_device wdog; > struct notifier_block restart_handler; > + bool ext_reset; > }; > > static bool nowayout = WATCHDOG_NOWAYOUT; > @@ -90,6 +93,13 @@ static int imx2_restart_handler(struct notifier_block *this, unsigned long mode, > struct imx2_wdt_device *wdev = container_of(this, > struct imx2_wdt_device, > restart_handler); > + > + /* Use internal reset or external - not both */ > + if (wdev->ext_reset) > + wcr_enable |= IMX2_WDT_WCR_SRS; /* do not assert int reset */ > + else > + wcr_enable |= IMX2_WDT_WCR_WDA; /* do not assert ext-reset */ > + > /* Assert SRS signal */ > regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable); > /* > @@ -119,8 +129,12 @@ static inline void imx2_wdt_setup(struct watchdog_device *wdog) > val |= IMX2_WDT_WCR_WDZST; > /* Strip the old watchdog Time-Out value */ > val &= ~IMX2_WDT_WCR_WT; > - /* Generate reset if WDOG times out */ > - val &= ~IMX2_WDT_WCR_WRE; > + /* Generate internal chip-level reset if WDOG times out */ > + if (!wdev->ext_reset) > + val &= ~IMX2_WDT_WCR_WRE; > + /* Or if external-reset assert WDOG_B reset only on time-out */ > + else > + val |= IMX2_WDT_WCR_WRE; I don't really understand what this means. Normally I would hope that a watchdog only generates a reset if/when it times out. > /* Keep Watchdog Disabled */ > val &= ~IMX2_WDT_WCR_WDE; > /* Set the watchdog's Time-Out value */ > @@ -267,6 +281,8 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) > regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val); > wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0; > > + wdev->ext_reset = of_property_read_bool(pdev->dev.of_node, > + "ext-reset-output"); > wdog->timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); > if (wdog->timeout != timeout) > dev_warn(&pdev->dev, "Initial timeout out of range! Clamped from %u to %u\n", > -- > 2.6.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in > the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: linux@roeck-us.net (Guenter Roeck) Date: Thu, 5 Nov 2015 14:23:25 -0800 Subject: [PATCH v4 1/2] watchdog: imx2_wdt: add external reset support via 'ext-reset-output' dt prop In-Reply-To: <1446758362-11702-2-git-send-email-akshay.bhat@timesys.com> References: <1446758362-11702-1-git-send-email-akshay.bhat@timesys.com> <1446758362-11702-2-git-send-email-akshay.bhat@timesys.com> Message-ID: <20151105222325.GA26159@roeck-us.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Nov 05, 2015 at 04:19:21PM -0500, Akshay Bhat wrote: > From: Tim Harvey > > The IMX6 watchdog supports assertion of a signal (WDOG_B) which > can be pinmux'd to an external pin. This is typically used for boards that > have PMIC's in control of the IMX6 power rails. In fact, failure to use > such an external reset on boards with external PMIC's can result in various > hangs due to the IMX6 not being fully reset [1] as well as the board failing > to reset because its PMIC has not been reset to provide adequate voltage for > the CPU when coming out of reset at 800Mhz. > > This uses a new device-tree property 'ext-reset-output' to indicate the > board has such a reset and to cause the watchdog to be configured to assert > WDOG_B instead of an internal reset both on a watchdog timeout and in > system_restart. > > [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-March/333689.html > > Cc: Lucas Stach > Signed-off-by: Tim Harvey > --- > .../devicetree/bindings/watchdog/fsl-imx-wdt.txt | 2 ++ > drivers/watchdog/imx2_wdt.c | 20 ++++++++++++++++++-- > 2 files changed, 20 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > index 8dab6fd..9b89b3a 100644 > --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt > @@ -9,6 +9,8 @@ Optional property: properties ? > - big-endian: If present the watchdog device's registers are implemented > in big endian mode, otherwise in native mode(same with CPU), for more > detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. > +- ext-reset-output: If present the watchdog device is configured to assert its Should that have a vendor prefix ? Also, not sure if "-output" has any real value in the property name. "fsl,external-reset", maybe ? > + external reset (WDOG_B) instead of issuing a software reset. > > Examples: > > diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c > index 29ef719..84bfec4 100644 > --- a/drivers/watchdog/imx2_wdt.c > +++ b/drivers/watchdog/imx2_wdt.c > @@ -41,6 +41,8 @@ > > #define IMX2_WDT_WCR 0x00 /* Control Register */ > #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ > +#define IMX2_WDT_WCR_WDA (1 << 5) /* -> External Reset WDOG_B */ > +#define IMX2_WDT_WCR_SRS (1 << 4) /* -> Software Reset Signal */ > #define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ > #define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ > #define IMX2_WDT_WCR_WDZST (1 << 0) /* -> Watchdog timer Suspend */ > @@ -65,6 +67,7 @@ struct imx2_wdt_device { > struct timer_list timer; /* Pings the watchdog when closed */ > struct watchdog_device wdog; > struct notifier_block restart_handler; > + bool ext_reset; > }; > > static bool nowayout = WATCHDOG_NOWAYOUT; > @@ -90,6 +93,13 @@ static int imx2_restart_handler(struct notifier_block *this, unsigned long mode, > struct imx2_wdt_device *wdev = container_of(this, > struct imx2_wdt_device, > restart_handler); > + > + /* Use internal reset or external - not both */ > + if (wdev->ext_reset) > + wcr_enable |= IMX2_WDT_WCR_SRS; /* do not assert int reset */ > + else > + wcr_enable |= IMX2_WDT_WCR_WDA; /* do not assert ext-reset */ > + > /* Assert SRS signal */ > regmap_write(wdev->regmap, IMX2_WDT_WCR, wcr_enable); > /* > @@ -119,8 +129,12 @@ static inline void imx2_wdt_setup(struct watchdog_device *wdog) > val |= IMX2_WDT_WCR_WDZST; > /* Strip the old watchdog Time-Out value */ > val &= ~IMX2_WDT_WCR_WT; > - /* Generate reset if WDOG times out */ > - val &= ~IMX2_WDT_WCR_WRE; > + /* Generate internal chip-level reset if WDOG times out */ > + if (!wdev->ext_reset) > + val &= ~IMX2_WDT_WCR_WRE; > + /* Or if external-reset assert WDOG_B reset only on time-out */ > + else > + val |= IMX2_WDT_WCR_WRE; I don't really understand what this means. Normally I would hope that a watchdog only generates a reset if/when it times out. > /* Keep Watchdog Disabled */ > val &= ~IMX2_WDT_WCR_WDE; > /* Set the watchdog's Time-Out value */ > @@ -267,6 +281,8 @@ static int __init imx2_wdt_probe(struct platform_device *pdev) > regmap_read(wdev->regmap, IMX2_WDT_WRSR, &val); > wdog->bootstatus = val & IMX2_WDT_WRSR_TOUT ? WDIOF_CARDRESET : 0; > > + wdev->ext_reset = of_property_read_bool(pdev->dev.of_node, > + "ext-reset-output"); > wdog->timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); > if (wdog->timeout != timeout) > dev_warn(&pdev->dev, "Initial timeout out of range! Clamped from %u to %u\n", > -- > 2.6.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html