[PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

The OF node passed to irq_domain_add_linear() should be a
pointer to interrupt controller's device tree node, or NULL,
but not the PCI controller's node.

This fixes an oops in msi_domain_alloc_irqs() when it tries
to call msi_check().

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
 drivers/pci/host/pcie-rcar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 2377bf0..c6fa562 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 	msi->chip.setup_irq = rcar_msi_setup_irq;
 	msi->chip.teardown_irq = rcar_msi_teardown_irq;
 
-	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
+	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
 					    &msi_domain_ops, &msi->chip);
 	if (!msi->domain) {
 		dev_err(&pdev->dev, "failed to create IRQ domain\n");
-- 
1.9.1

[PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

The OF node passed to irq_domain_add_linear() should be a
pointer to interrupt controller's device tree node, or NULL,
but not the PCI controller's node.

This fixes an oops in msi_domain_alloc_irqs() when it tries
to call msi_check().

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
---
 drivers/pci/host/pcie-rcar.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
index 2377bf0..c6fa562 100644
--- a/drivers/pci/host/pcie-rcar.c
+++ b/drivers/pci/host/pcie-rcar.c
@@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
 	msi->chip.setup_irq = rcar_msi_setup_irq;
 	msi->chip.teardown_irq = rcar_msi_teardown_irq;
 
-	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
+	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
 					    &msi_domain_ops, &msi->chip);
 	if (!msi->domain) {
 		dev_err(&pdev->dev, "failed to create IRQ domain\n");
-- 
1.9.1

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 560 bytes --]

On Tue, Nov 03, 2015 at 09:28:19AM +0000, Phil Edworthy wrote:
> The OF node passed to irq_domain_add_linear() should be a
> pointer to interrupt controller's device tree node, or NULL,
> but not the PCI controller's node.
> 
> This fixes an oops in msi_domain_alloc_irqs() when it tries
> to call msi_check().
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Was this the MSI problem you were talking about?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 560 bytes --]

On Tue, Nov 03, 2015 at 09:28:19AM +0000, Phil Edworthy wrote:
> The OF node passed to irq_domain_add_linear() should be a
> pointer to interrupt controller's device tree node, or NULL,
> but not the PCI controller's node.
> 
> This fixes an oops in msi_domain_alloc_irqs() when it tries
> to call msi_check().
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Was this the MSI problem you were talking about?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Wolfram,

On 07 November 2015 14:00, Wolfram wrote:
> On Tue, Nov 03, 2015 at 09:28:19AM +0000, Phil Edworthy wrote:
> > The OF node passed to irq_domain_add_linear() should be a
> > pointer to interrupt controller's device tree node, or NULL,
> > but not the PCI controller's node.
> >
> > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > to call msi_check().
> >
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> 
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Was this the MSI problem you were talking about?
Yes, that was the one.

Thanks for the review & test.
Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Wolfram,

On 07 November 2015 14:00, Wolfram wrote:
> On Tue, Nov 03, 2015 at 09:28:19AM +0000, Phil Edworthy wrote:
> > The OF node passed to irq_domain_add_linear() should be a
> > pointer to interrupt controller's device tree node, or NULL,
> > but not the PCI controller's node.
> >
> > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > to call msi_check().
> >
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> 
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> Was this the MSI problem you were talking about?
Yes, that was the one.

Thanks for the review & test.
Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

cc'ing others (Tegra, Altera, Designware) who may have the same bug

On 03 November 2015 09:28, Phil Edworthy wrote:
> The OF node passed to irq_domain_add_linear() should be a
> pointer to interrupt controller's device tree node, or NULL,
> but not the PCI controller's node.
> 
> This fixes an oops in msi_domain_alloc_irqs() when it tries
> to call msi_check().
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> ---
>  drivers/pci/host/pcie-rcar.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index 2377bf0..c6fa562 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
>  	msi->chip.setup_irq = rcar_msi_setup_irq;
>  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> 
> -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> INT_PCI_MSI_NR,
> +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
>  					    &msi_domain_ops, &msi->chip);
>  	if (!msi->domain) {
>  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> --
> 1.9.1

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

cc'ing others (Tegra, Altera, Designware) who may have the same bug

On 03 November 2015 09:28, Phil Edworthy wrote:
> The OF node passed to irq_domain_add_linear() should be a
> pointer to interrupt controller's device tree node, or NULL,
> but not the PCI controller's node.
> 
> This fixes an oops in msi_domain_alloc_irqs() when it tries
> to call msi_check().
> 
> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> ---
>  drivers/pci/host/pcie-rcar.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> index 2377bf0..c6fa562 100644
> --- a/drivers/pci/host/pcie-rcar.c
> +++ b/drivers/pci/host/pcie-rcar.c
> @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
>  	msi->chip.setup_irq = rcar_msi_setup_irq;
>  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> 
> -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> INT_PCI_MSI_NR,
> +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
>  					    &msi_domain_ops, &msi->chip);
>  	if (!msi->domain) {
>  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> --
> 1.9.1

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1814 bytes --]

On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> cc'ing others (Tegra, Altera, Designware) who may have the same bug
> 
> On 03 November 2015 09:28, Phil Edworthy wrote:
> > The OF node passed to irq_domain_add_linear() should be a
> > pointer to interrupt controller's device tree node, or NULL,
> > but not the PCI controller's node.
> > 
> > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > to call msi_check().
> > 
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > ---
> >  drivers/pci/host/pcie-rcar.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > index 2377bf0..c6fa562 100644
> > --- a/drivers/pci/host/pcie-rcar.c
> > +++ b/drivers/pci/host/pcie-rcar.c
> > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
> >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > 
> > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > INT_PCI_MSI_NR,
> > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> >  					    &msi_domain_ops, &msi->chip);
> >  	if (!msi->domain) {
> >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");

On Tegra the PCI controller is in fact the interrupt controller for
MSIs. And looking at the code here it seems like the same would apply to
RCAR.

I'm also slightly confused as to why this would cause ->msi_check() to
fail. The default implementation (msi_domain_ops_check()) doesn't do
anything.

Also, how is passing in NULL instead of a valid struct device_node *
going to prevent an oops? Perhaps this is one of those reference count
imbalance bugs that have recently been showing up?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1814 bytes --]

On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> cc'ing others (Tegra, Altera, Designware) who may have the same bug
> 
> On 03 November 2015 09:28, Phil Edworthy wrote:
> > The OF node passed to irq_domain_add_linear() should be a
> > pointer to interrupt controller's device tree node, or NULL,
> > but not the PCI controller's node.
> > 
> > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > to call msi_check().
> > 
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > ---
> >  drivers/pci/host/pcie-rcar.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > index 2377bf0..c6fa562 100644
> > --- a/drivers/pci/host/pcie-rcar.c
> > +++ b/drivers/pci/host/pcie-rcar.c
> > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
> >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > 
> > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > INT_PCI_MSI_NR,
> > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> >  					    &msi_domain_ops, &msi->chip);
> >  	if (!msi->domain) {
> >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");

On Tegra the PCI controller is in fact the interrupt controller for
MSIs. And looking at the code here it seems like the same would apply to
RCAR.

I'm also slightly confused as to why this would cause ->msi_check() to
fail. The default implementation (msi_domain_ops_check()) doesn't do
anything.

Also, how is passing in NULL instead of a valid struct device_node *
going to prevent an oops? Perhaps this is one of those reference count
imbalance bugs that have recently been showing up?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Thierry,

On 09 November 2015 16:11, Thierry wrote:
> On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> >
> > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > The OF node passed to irq_domain_add_linear() should be a
> > > pointer to interrupt controller's device tree node, or NULL,
> > > but not the PCI controller's node.
> > >
> > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > to call msi_check().
> > >
> > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > ---
> > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > index 2377bf0..c6fa562 100644
> > > --- a/drivers/pci/host/pcie-rcar.c
> > > +++ b/drivers/pci/host/pcie-rcar.c
> > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
> > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > >
> > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > INT_PCI_MSI_NR,
> > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > >  					    &msi_domain_ops, &msi->chip);
> > >  	if (!msi->domain) {
> > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> 
> On Tegra the PCI controller is in fact the interrupt controller for
> MSIs. And looking at the code here it seems like the same would apply to
> RCAR.
Yes you are correct here. 

> I'm also slightly confused as to why this would cause ->msi_check() to
> fail. The default implementation (msi_domain_ops_check()) doesn't do
> anything.
> 
> Also, how is passing in NULL instead of a valid struct device_node *
> going to prevent an oops? Perhaps this is one of those reference count
> imbalance bugs that have recently been showing up?
On arm64 (previously I didn't realise this just affects arm64, not arm),
the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
struct device::msi_domain") return an uninitialized msi domain that leads
to the oops. It appears that these changes assume that msi interrupt
controller is separate from the PCI controller.

Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Thierry,

On 09 November 2015 16:11, Thierry wrote:
> On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> >
> > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > The OF node passed to irq_domain_add_linear() should be a
> > > pointer to interrupt controller's device tree node, or NULL,
> > > but not the PCI controller's node.
> > >
> > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > to call msi_check().
> > >
> > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > ---
> > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > index 2377bf0..c6fa562 100644
> > > --- a/drivers/pci/host/pcie-rcar.c
> > > +++ b/drivers/pci/host/pcie-rcar.c
> > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie *pcie)
> > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > >
> > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > INT_PCI_MSI_NR,
> > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > >  					    &msi_domain_ops, &msi->chip);
> > >  	if (!msi->domain) {
> > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> 
> On Tegra the PCI controller is in fact the interrupt controller for
> MSIs. And looking at the code here it seems like the same would apply to
> RCAR.
Yes you are correct here. 

> I'm also slightly confused as to why this would cause ->msi_check() to
> fail. The default implementation (msi_domain_ops_check()) doesn't do
> anything.
> 
> Also, how is passing in NULL instead of a valid struct device_node *
> going to prevent an oops? Perhaps this is one of those reference count
> imbalance bugs that have recently been showing up?
On arm64 (previously I didn't realise this just affects arm64, not arm),
the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
struct device::msi_domain") return an uninitialized msi domain that leads
to the oops. It appears that these changes assume that msi interrupt
controller is separate from the PCI controller.

Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Thierry,

On 09 November 2015 17:24, Phil wrote:
> On 09 November 2015 16:11, Thierry wrote:
> > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > >
> > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > The OF node passed to irq_domain_add_linear() should be a
> > > > pointer to interrupt controller's device tree node, or NULL,
> > > > but not the PCI controller's node.
> > > >
> > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > to call msi_check().
> > > >
> > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > ---
> > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > index 2377bf0..c6fa562 100644
> > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> *pcie)
> > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > >
> > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > INT_PCI_MSI_NR,
> > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > >  					    &msi_domain_ops, &msi->chip);
> > > >  	if (!msi->domain) {
> > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> >
> > On Tegra the PCI controller is in fact the interrupt controller for
> > MSIs. And looking at the code here it seems like the same would apply to
> > RCAR.
> Yes you are correct here.
> 
> > I'm also slightly confused as to why this would cause ->msi_check() to
> > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > anything.
> >
> > Also, how is passing in NULL instead of a valid struct device_node *
> > going to prevent an oops? Perhaps this is one of those reference count
> > imbalance bugs that have recently been showing up?
> On arm64 (previously I didn't realise this just affects arm64, not arm),
> the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> struct device::msi_domain") return an uninitialized msi domain that leads
> to the oops. It appears that these changes assume that msi interrupt
> controller is separate from the PCI controller.
More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
pci_msi_get_domain() calls dev_get_msi_domain() and at this point
dev->msi_domain is uninitialized.

Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Thierry,

On 09 November 2015 17:24, Phil wrote:
> On 09 November 2015 16:11, Thierry wrote:
> > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > >
> > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > The OF node passed to irq_domain_add_linear() should be a
> > > > pointer to interrupt controller's device tree node, or NULL,
> > > > but not the PCI controller's node.
> > > >
> > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > to call msi_check().
> > > >
> > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > ---
> > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > index 2377bf0..c6fa562 100644
> > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> *pcie)
> > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > >
> > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > INT_PCI_MSI_NR,
> > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > >  					    &msi_domain_ops, &msi->chip);
> > > >  	if (!msi->domain) {
> > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> >
> > On Tegra the PCI controller is in fact the interrupt controller for
> > MSIs. And looking at the code here it seems like the same would apply to
> > RCAR.
> Yes you are correct here.
> 
> > I'm also slightly confused as to why this would cause ->msi_check() to
> > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > anything.
> >
> > Also, how is passing in NULL instead of a valid struct device_node *
> > going to prevent an oops? Perhaps this is one of those reference count
> > imbalance bugs that have recently been showing up?
> On arm64 (previously I didn't realise this just affects arm64, not arm),
> the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> struct device::msi_domain") return an uninitialized msi domain that leads
> to the oops. It appears that these changes assume that msi interrupt
> controller is separate from the PCI controller.
More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
pci_msi_get_domain() calls dev_get_msi_domain() and at this point
dev->msi_domain is uninitialized.

Phil

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Simon Horman]

On Sat, Nov 07, 2015 at 02:59:51PM +0100, Wolfram Sang wrote:
> On Tue, Nov 03, 2015 at 09:28:19AM +0000, Phil Edworthy wrote:
> > The OF node passed to irq_domain_add_linear() should be a
> > pointer to interrupt controller's device tree node, or NULL,
> > but not the PCI controller's node.
> > 
> > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > to call msi_check().
> > 
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> 
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Hi Bjorn,

please feel free to apply.

Acked-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Simon Horman]

On Sat, Nov 07, 2015 at 02:59:51PM +0100, Wolfram Sang wrote:
> On Tue, Nov 03, 2015 at 09:28:19AM +0000, Phil Edworthy wrote:
> > The OF node passed to irq_domain_add_linear() should be a
> > pointer to interrupt controller's device tree node, or NULL,
> > but not the PCI controller's node.
> > 
> > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > to call msi_check().
> > 
> > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> 
> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Hi Bjorn,

please feel free to apply.

Acked-by: Simon Horman <horms+renesas@verge.net.au>

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2914 bytes --]

On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> Hi Thierry,
> 
> On 09 November 2015 17:24, Phil wrote:
> > On 09 November 2015 16:11, Thierry wrote:
> > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > >
> > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > but not the PCI controller's node.
> > > > >
> > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > to call msi_check().
> > > > >
> > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > ---
> > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > index 2377bf0..c6fa562 100644
> > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > *pcie)
> > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > >
> > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > INT_PCI_MSI_NR,
> > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > >  					    &msi_domain_ops, &msi->chip);
> > > > >  	if (!msi->domain) {
> > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > >
> > > On Tegra the PCI controller is in fact the interrupt controller for
> > > MSIs. And looking at the code here it seems like the same would apply to
> > > RCAR.
> > Yes you are correct here.
> > 
> > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > anything.
> > >
> > > Also, how is passing in NULL instead of a valid struct device_node *
> > > going to prevent an oops? Perhaps this is one of those reference count
> > > imbalance bugs that have recently been showing up?
> > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > struct device::msi_domain") return an uninitialized msi domain that leads
> > to the oops. It appears that these changes assume that msi interrupt
> > controller is separate from the PCI controller.
> More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> dev->msi_domain is uninitialized.

Marc, any idea what's going on here?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 2914 bytes --]

On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> Hi Thierry,
> 
> On 09 November 2015 17:24, Phil wrote:
> > On 09 November 2015 16:11, Thierry wrote:
> > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > >
> > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > but not the PCI controller's node.
> > > > >
> > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > to call msi_check().
> > > > >
> > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > ---
> > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > index 2377bf0..c6fa562 100644
> > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > *pcie)
> > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > >
> > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > INT_PCI_MSI_NR,
> > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > >  					    &msi_domain_ops, &msi->chip);
> > > > >  	if (!msi->domain) {
> > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > >
> > > On Tegra the PCI controller is in fact the interrupt controller for
> > > MSIs. And looking at the code here it seems like the same would apply to
> > > RCAR.
> > Yes you are correct here.
> > 
> > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > anything.
> > >
> > > Also, how is passing in NULL instead of a valid struct device_node *
> > > going to prevent an oops? Perhaps this is one of those reference count
> > > imbalance bugs that have recently been showing up?
> > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > struct device::msi_domain") return an uninitialized msi domain that leads
> > to the oops. It appears that these changes assume that msi interrupt
> > controller is separate from the PCI controller.
> More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> dev->msi_domain is uninitialized.

Marc, any idea what's going on here?

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On Tue, 10 Nov 2015 16:52:33 +0100
Thierry Reding <treding@nvidia.com> wrote:

> On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > Hi Thierry,
> > 
> > On 09 November 2015 17:24, Phil wrote:
> > > On 09 November 2015 16:11, Thierry wrote:
> > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > > >
> > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > but not the PCI controller's node.
> > > > > >
> > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > to call msi_check().
> > > > > >
> > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > ---
> > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > > index 2377bf0..c6fa562 100644
> > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > > *pcie)
> > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > >
> > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > INT_PCI_MSI_NR,
> > > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > > >  					    &msi_domain_ops, &msi->chip);
> > > > > >  	if (!msi->domain) {
> > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > >
> > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > MSIs. And looking at the code here it seems like the same would apply to
> > > > RCAR.
> > > Yes you are correct here.
> > > 
> > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > > anything.
> > > >
> > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > going to prevent an oops? Perhaps this is one of those reference count
> > > > imbalance bugs that have recently been showing up?
> > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > > struct device::msi_domain") return an uninitialized msi domain that leads
> > > to the oops. It appears that these changes assume that msi interrupt
> > > controller is separate from the PCI controller.
> > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > dev->msi_domain is uninitialized.
> 
> Marc, any idea what's going on here?

Thanks for putting me in the loop.

No precise idea yet, but the proposed fix definitely looks like the
wrong one. Actually, not passing a node identifier to any domain
constructor is pretty much always a mistake when using DT.

Can someone post a stack trace for this issue so that I can have a
look? I'm currently traveling, so expect a slightly delayed reply...

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny.

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 11 November 2015 16:38, Marc Zyngier wrote:
> On Tue, 10 Nov 2015 16:52:33 +0100
> Thierry Reding <treding@nvidia.com> wrote:
> 
> > On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > > Hi Thierry,
> > >
> > > On 09 November 2015 17:24, Phil wrote:
> > > > On 09 November 2015 16:11, Thierry wrote:
> > > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > > > >
> > > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > > but not the PCI controller's node.
> > > > > > >
> > > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > > to call msi_check().
> > > > > > >
> > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > > ---
> > > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > > > index 2377bf0..c6fa562 100644
> > > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > > > *pcie)
> > > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > > >
> > > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > > INT_PCI_MSI_NR,
> > > > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > > > >  					    &msi_domain_ops, &msi-
> >chip);
> > > > > > >  	if (!msi->domain) {
> > > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > > >
> > > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > > MSIs. And looking at the code here it seems like the same would apply to
> > > > > RCAR.
> > > > Yes you are correct here.
> > > >
> > > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > > > anything.
> > > > >
> > > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > > going to prevent an oops? Perhaps this is one of those reference count
> > > > > imbalance bugs that have recently been showing up?
> > > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > > > struct device::msi_domain") return an uninitialized msi domain that leads
> > > > to the oops. It appears that these changes assume that msi interrupt
> > > > controller is separate from the PCI controller.
> > > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > > dev->msi_domain is uninitialized.
> >
> > Marc, any idea what's going on here?
> 
> Thanks for putting me in the loop.
> 
> No precise idea yet, but the proposed fix definitely looks like the
> wrong one. Actually, not passing a node identifier to any domain
> constructor is pretty much always a mistake when using DT.
> 
> Can someone post a stack trace for this issue so that I can have a
> look? I'm currently traveling, so expect a slightly delayed reply...

Unfortunately, not all the code for this arm64 board is upstream
yet, this code base is off 4.3-rc7.

systemd-udevd[1315]: undefined instruction: pcÿffffc03106d41c
Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
Modules linked in: e1000e(+)
CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
PC is at 0xffffffc03106d41c
LR is at msi_domain_alloc_irqs+0x3c/0x1e0
pc : [<ffffffc03106d41c>] lr : [<ffffffc0000fa744>] pstate: 00000145
sp : ffffffc030ecf930
x29: ffffffc030ecf930 x28: 0000000000000124
x27: ffffffc0312628dc x26: ffffffc03193c890
x25: ffffffc0311fd000 x24: 00000000000001b4
x23: ffffffc0311fd160 x22: ffffffc03193a810
x21: ffffffc03193c800 x20: ffffffc0312628c0
x19: 0000000000000003 x18: 0000000000770000
x17: 0000007f96948570 x16: ffffffc0001dfa70
x15: 003b9aca00000000 x14: 63696d616e796420
x13: 6f74207465732029 x12: 0000000000000038
x11: ffffff8000668fff x10: 0140000000000000
x9 : 0000000000000000 x8 : ffffffc030d7f500
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000000
x3 : ffffffc03106d418 x2 : ffffffc03193c890
x1 : ffffffc0311fd160 x0 : ffffffc0311fd000

Process systemd-udevd (pid: 1315, stack limit = 0xffffffc030ecc020)
Stack: (0xffffffc030ecf930 to 0xffffffc030ed0000)
f920:                                   ffffffc030ecf9a0 ffffffc00036537c
f940: ffffffc03193c800 ffffffc0312628c0 ffffffc03193c800 ffffff8000668000
f960: ffffffc03193c890 0000000000000001 0000000000000003 ffffffc03193ca70
f980: ffffffc03193c890 0000000000000001 0000000000000002 ffffffc03193ca70
f9a0: ffffffc030ecf9d0 ffffffc000365990 0000000000000003 ffffffc000365960
f9c0: 0000000000000003 ffffffc0003658dc ffffffc030ecfa40 ffffffc000365a30
f9e0: 0000000000000003 ffffffc0312628c0 ffffffc03193c800 0000000000000003
fa00: ffffffc0304107c0 ffffffbffc020250 ffffffc030410000 0000000000020000
fa20: 0000000000000001 ffffffc03193c800 ffffffc03193c890 000000000004e5e0
fa40: ffffffc030ecfa70 ffffffbffc0192ec ffffffc0304107c0 ffffffc03193c800
fa60: ffffffc03193c890 ffffffbffc01e5e0 ffffffc030ecfa90 ffffffbffc01c9b8
fa80: ffffffc0304127c0 ffffffbffc01e5e0 ffffffc030ecfb10 ffffffc00035aaf0
faa0: ffffffc03193c890 ffffffbffc025f98 ffffffc03193c800 ffffffbffc025f30
fac0: ffffffbffc0206e8 ffffffbffc026090 ffffffc030ff3d00 ffffff800029d000
fae0: ffffffc0001173bc ffffffc00035aadc ffffffc03193c890 0000ffbffc025f98
fb00: ffffffc03193c800 ffffffbffc025f30 ffffffc030ecfb50 ffffffc0003d6030
fb20: ffffffc03193c890 ffffffc0009ca000 0000000000000000 ffffffbffc025f98
fb40: 0000000000000002 ffffffc0009ca000 ffffffc030ecfb90 ffffffc0003d61c0
fb60: ffffffc03193c890 ffffffbffc025f98 ffffffc03193c8f0 ffffffc00095bf08
fb80: ffffffc000968000 ffffffc0003d614c ffffffc030ecfbc0 ffffffc0003d4240
fba0: 0000000000000000 ffffffbffc025f98 ffffffc0003d6124 ffffffc030ecfc10
fbc0: ffffffc030ecfc00 ffffffc0003d5a9c ffffffbffc025f98 ffffffc030502cc0
fbe0: 0000000000000000 ffffffc000608b28 ffffffc0318e04a8 ffffffc0319d47e8
fc00: ffffffc030ecfc10 ffffffc0003d56d8 ffffffc030ecfc50 ffffffc0003d6a38
fc20: ffffffbffc025f98 ffffffc000934b20 ffffffc031262d00 ffffffbffc031000
fc40: 0000000000000000 0000000000000008 ffffffc030ecfc70 ffffffc00035995c
fc60: ffffffc000934b20 ffffffc000934b20 ffffffc030ecfc80 ffffffbffc031034
fc80: ffffffc030ecfc90 ffffffc0000828ec ffffffc030ecfd10 ffffffc00013ecc4
fca0: ffffffbffc026040 ffffffc000941000 ffffffbffc026040 ffffffc031262dc0
fcc0: 0000000000000001 ffffffc000941000 ffffffbffc026040 0000000000000001
fce0: 0000000000000001 ffffffbffc026090 ffffffc030ff3d00 ffffff800029d000
fd00: ffffffc0001173bc ffffffc030ff3d10 ffffffc030ecfd40 ffffffc00011a700
fd20: ffffffc030ecfe70 ffffffc030ff3d10 ffffffbffc026040 0000000000000001
fd40: ffffffc030ecfe40 ffffffc00011ac3c 0000000000000000 0000000000000009
fd60: 0000007f96809f40 0000007f96944c14 0000000080000000 0000000000000015
fd80: 000000000000011c 0000000000000111 ffffffc00061b000 ffffffc030ecc000
fda0: ffffffc000000076 0000006400000077 ffffffbf00000072 ffffff800000006e
fdc0: ffffffbf0000003f ffffffbffc031070 ffffffc0306125c0 ffffffc0306125c0
fde0: 000081a40000000f 0000000000000001 0000000000000000 00000000003c10e3
fe00: 00000000564449f9 0000000000000000 0000000000000000 0000000000000000
fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
fe40: 0000007fef721500 ffffffc000085cb0 0000000000000000 0000007f96809f40
fe60: ffffffffffffffff ffffffc030ecfed0 ffffff800029d000 00000000003c10e3
fe80: ffffff8000497b90 ffffff80004979d5 ffffff8000659d80 0000000000026370
fea0: 000000000002c418 0000000000000000 0000000000000000 0000002d0000002c
fec0: 0000000000000017 0000000000000012 0000000000000009 0000007f96809f40
fee0: 0000000000000000 0000000000000009 0000000000000000 60ceffffffffffff
ff00: ffffffffffffffff ffffffffffffffff 0000000000000111 fefefefefefeff42
ff20: 0101010101010101 0000000000000018 0000000000000000 ffffffffffff0000
ff40: 0000007f9688366c 0000000000000020 0000007f96944bf0 0000007f9681a768
ff60: 0000000000520000 000000559d66f190 0000007f96809f40 0000000000020000
ff80: 0000000000000000 0000007fef721ad8 0000000000000000 000000559d671360
ffa0: 0000000000000000 0000007fef721ac8 0000000000020000 0000007fef721500
ffc0: 0000007f96803c44 0000007fef721500 0000007f96944c14 0000000080000000
ffe0: 0000000000000009 0000000000000111 ffffffffffffffff ffffffffffffffff
Call trace:
[<ffffffc03106d41c>] 0xffffffc03106d41c
[<ffffffc000365378>] pci_msi_setup_msi_irqs+0x24/0x64
[<ffffffc00036598c>] pci_enable_msix+0x3cc/0x438
[<ffffffc000365a2c>] pci_enable_msix_range+0x34/0x80
[<ffffffbffc0192e8>] e1000e_set_interrupt_capability+0xd0/0x110 [e1000e]
[<ffffffbffc01c9b4>] e1000_probe+0x444/0xcb8 [e1000e]
[<ffffffc00035aaec>] pci_device_probe+0x94/0x10c
[<ffffffc0003d602c>] driver_probe_device+0x1e8/0x2e0
[<ffffffc0003d61bc>] __driver_attach+0x98/0xa0
[<ffffffc0003d423c>] bus_for_each_dev+0x54/0x98
[<ffffffc0003d5a98>] driver_attach+0x1c/0x28
[<ffffffc0003d56d4>] bus_add_driver+0x1c0/0x228
[<ffffffc0003d6a34>] driver_register+0x5c/0xf4
[<ffffffc000359958>] __pci_register_driver+0x40/0x4c
[<ffffffbffc031030>] e1000_init_module+0x30/0x70 [e1000e]
[<ffffffc0000828e8>] do_one_initcall+0x88/0x198
[<ffffffc00013ecc0>] do_init_module+0x58/0x1c4
[<ffffffc00011a6fc>] load_module+0x1954/0x1ce0
[<ffffffc00011ac38>] SyS_finit_module+0x78/0x88
[<ffffffc000085cac>] el0_svc_naked+0x20/0x28
Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
---[ end trace 3249daca187c36b0 ]---

Thanks
Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 11 November 2015 16:38, Marc Zyngier wrote:
> On Tue, 10 Nov 2015 16:52:33 +0100
> Thierry Reding <treding@nvidia.com> wrote:
> 
> > On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > > Hi Thierry,
> > >
> > > On 09 November 2015 17:24, Phil wrote:
> > > > On 09 November 2015 16:11, Thierry wrote:
> > > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > > > >
> > > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > > but not the PCI controller's node.
> > > > > > >
> > > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > > to call msi_check().
> > > > > > >
> > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > > ---
> > > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > > > index 2377bf0..c6fa562 100644
> > > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > > > *pcie)
> > > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > > >
> > > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > > INT_PCI_MSI_NR,
> > > > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > > > >  					    &msi_domain_ops, &msi-
> >chip);
> > > > > > >  	if (!msi->domain) {
> > > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > > >
> > > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > > MSIs. And looking at the code here it seems like the same would apply to
> > > > > RCAR.
> > > > Yes you are correct here.
> > > >
> > > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > > > anything.
> > > > >
> > > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > > going to prevent an oops? Perhaps this is one of those reference count
> > > > > imbalance bugs that have recently been showing up?
> > > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > > > struct device::msi_domain") return an uninitialized msi domain that leads
> > > > to the oops. It appears that these changes assume that msi interrupt
> > > > controller is separate from the PCI controller.
> > > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > > dev->msi_domain is uninitialized.
> >
> > Marc, any idea what's going on here?
> 
> Thanks for putting me in the loop.
> 
> No precise idea yet, but the proposed fix definitely looks like the
> wrong one. Actually, not passing a node identifier to any domain
> constructor is pretty much always a mistake when using DT.
> 
> Can someone post a stack trace for this issue so that I can have a
> look? I'm currently traveling, so expect a slightly delayed reply...

Unfortunately, not all the code for this arm64 board is upstream
yet, this code base is off 4.3-rc7.

systemd-udevd[1315]: undefined instruction: pc=ffffffc03106d41c
Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
Modules linked in: e1000e(+)
CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
PC is at 0xffffffc03106d41c
LR is at msi_domain_alloc_irqs+0x3c/0x1e0
pc : [<ffffffc03106d41c>] lr : [<ffffffc0000fa744>] pstate: 00000145
sp : ffffffc030ecf930
x29: ffffffc030ecf930 x28: 0000000000000124
x27: ffffffc0312628dc x26: ffffffc03193c890
x25: ffffffc0311fd000 x24: 00000000000001b4
x23: ffffffc0311fd160 x22: ffffffc03193a810
x21: ffffffc03193c800 x20: ffffffc0312628c0
x19: 0000000000000003 x18: 0000000000770000
x17: 0000007f96948570 x16: ffffffc0001dfa70
x15: 003b9aca00000000 x14: 63696d616e796420
x13: 6f74207465732029 x12: 0000000000000038
x11: ffffff8000668fff x10: 0140000000000000
x9 : 0000000000000000 x8 : ffffffc030d7f500
x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000000
x3 : ffffffc03106d418 x2 : ffffffc03193c890
x1 : ffffffc0311fd160 x0 : ffffffc0311fd000

Process systemd-udevd (pid: 1315, stack limit = 0xffffffc030ecc020)
Stack: (0xffffffc030ecf930 to 0xffffffc030ed0000)
f920:                                   ffffffc030ecf9a0 ffffffc00036537c
f940: ffffffc03193c800 ffffffc0312628c0 ffffffc03193c800 ffffff8000668000
f960: ffffffc03193c890 0000000000000001 0000000000000003 ffffffc03193ca70
f980: ffffffc03193c890 0000000000000001 0000000000000002 ffffffc03193ca70
f9a0: ffffffc030ecf9d0 ffffffc000365990 0000000000000003 ffffffc000365960
f9c0: 0000000000000003 ffffffc0003658dc ffffffc030ecfa40 ffffffc000365a30
f9e0: 0000000000000003 ffffffc0312628c0 ffffffc03193c800 0000000000000003
fa00: ffffffc0304107c0 ffffffbffc020250 ffffffc030410000 0000000000020000
fa20: 0000000000000001 ffffffc03193c800 ffffffc03193c890 000000000004e5e0
fa40: ffffffc030ecfa70 ffffffbffc0192ec ffffffc0304107c0 ffffffc03193c800
fa60: ffffffc03193c890 ffffffbffc01e5e0 ffffffc030ecfa90 ffffffbffc01c9b8
fa80: ffffffc0304127c0 ffffffbffc01e5e0 ffffffc030ecfb10 ffffffc00035aaf0
faa0: ffffffc03193c890 ffffffbffc025f98 ffffffc03193c800 ffffffbffc025f30
fac0: ffffffbffc0206e8 ffffffbffc026090 ffffffc030ff3d00 ffffff800029d000
fae0: ffffffc0001173bc ffffffc00035aadc ffffffc03193c890 0000ffbffc025f98
fb00: ffffffc03193c800 ffffffbffc025f30 ffffffc030ecfb50 ffffffc0003d6030
fb20: ffffffc03193c890 ffffffc0009ca000 0000000000000000 ffffffbffc025f98
fb40: 0000000000000002 ffffffc0009ca000 ffffffc030ecfb90 ffffffc0003d61c0
fb60: ffffffc03193c890 ffffffbffc025f98 ffffffc03193c8f0 ffffffc00095bf08
fb80: ffffffc000968000 ffffffc0003d614c ffffffc030ecfbc0 ffffffc0003d4240
fba0: 0000000000000000 ffffffbffc025f98 ffffffc0003d6124 ffffffc030ecfc10
fbc0: ffffffc030ecfc00 ffffffc0003d5a9c ffffffbffc025f98 ffffffc030502cc0
fbe0: 0000000000000000 ffffffc000608b28 ffffffc0318e04a8 ffffffc0319d47e8
fc00: ffffffc030ecfc10 ffffffc0003d56d8 ffffffc030ecfc50 ffffffc0003d6a38
fc20: ffffffbffc025f98 ffffffc000934b20 ffffffc031262d00 ffffffbffc031000
fc40: 0000000000000000 0000000000000008 ffffffc030ecfc70 ffffffc00035995c
fc60: ffffffc000934b20 ffffffc000934b20 ffffffc030ecfc80 ffffffbffc031034
fc80: ffffffc030ecfc90 ffffffc0000828ec ffffffc030ecfd10 ffffffc00013ecc4
fca0: ffffffbffc026040 ffffffc000941000 ffffffbffc026040 ffffffc031262dc0
fcc0: 0000000000000001 ffffffc000941000 ffffffbffc026040 0000000000000001
fce0: 0000000000000001 ffffffbffc026090 ffffffc030ff3d00 ffffff800029d000
fd00: ffffffc0001173bc ffffffc030ff3d10 ffffffc030ecfd40 ffffffc00011a700
fd20: ffffffc030ecfe70 ffffffc030ff3d10 ffffffbffc026040 0000000000000001
fd40: ffffffc030ecfe40 ffffffc00011ac3c 0000000000000000 0000000000000009
fd60: 0000007f96809f40 0000007f96944c14 0000000080000000 0000000000000015
fd80: 000000000000011c 0000000000000111 ffffffc00061b000 ffffffc030ecc000
fda0: ffffffc000000076 0000006400000077 ffffffbf00000072 ffffff800000006e
fdc0: ffffffbf0000003f ffffffbffc031070 ffffffc0306125c0 ffffffc0306125c0
fde0: 000081a40000000f 0000000000000001 0000000000000000 00000000003c10e3
fe00: 00000000564449f9 0000000000000000 0000000000000000 0000000000000000
fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
fe40: 0000007fef721500 ffffffc000085cb0 0000000000000000 0000007f96809f40
fe60: ffffffffffffffff ffffffc030ecfed0 ffffff800029d000 00000000003c10e3
fe80: ffffff8000497b90 ffffff80004979d5 ffffff8000659d80 0000000000026370
fea0: 000000000002c418 0000000000000000 0000000000000000 0000002d0000002c
fec0: 0000000000000017 0000000000000012 0000000000000009 0000007f96809f40
fee0: 0000000000000000 0000000000000009 0000000000000000 60ceffffffffffff
ff00: ffffffffffffffff ffffffffffffffff 0000000000000111 fefefefefefeff42
ff20: 0101010101010101 0000000000000018 0000000000000000 ffffffffffff0000
ff40: 0000007f9688366c 0000000000000020 0000007f96944bf0 0000007f9681a768
ff60: 0000000000520000 000000559d66f190 0000007f96809f40 0000000000020000
ff80: 0000000000000000 0000007fef721ad8 0000000000000000 000000559d671360
ffa0: 0000000000000000 0000007fef721ac8 0000000000020000 0000007fef721500
ffc0: 0000007f96803c44 0000007fef721500 0000007f96944c14 0000000080000000
ffe0: 0000000000000009 0000000000000111 ffffffffffffffff ffffffffffffffff
Call trace:
[<ffffffc03106d41c>] 0xffffffc03106d41c
[<ffffffc000365378>] pci_msi_setup_msi_irqs+0x24/0x64
[<ffffffc00036598c>] pci_enable_msix+0x3cc/0x438
[<ffffffc000365a2c>] pci_enable_msix_range+0x34/0x80
[<ffffffbffc0192e8>] e1000e_set_interrupt_capability+0xd0/0x110 [e1000e]
[<ffffffbffc01c9b4>] e1000_probe+0x444/0xcb8 [e1000e]
[<ffffffc00035aaec>] pci_device_probe+0x94/0x10c
[<ffffffc0003d602c>] driver_probe_device+0x1e8/0x2e0
[<ffffffc0003d61bc>] __driver_attach+0x98/0xa0
[<ffffffc0003d423c>] bus_for_each_dev+0x54/0x98
[<ffffffc0003d5a98>] driver_attach+0x1c/0x28
[<ffffffc0003d56d4>] bus_add_driver+0x1c0/0x228
[<ffffffc0003d6a34>] driver_register+0x5c/0xf4
[<ffffffc000359958>] __pci_register_driver+0x40/0x4c
[<ffffffbffc031030>] e1000_init_module+0x30/0x70 [e1000e]
[<ffffffc0000828e8>] do_one_initcall+0x88/0x198
[<ffffffc00013ecc0>] do_init_module+0x58/0x1c4
[<ffffffc00011a6fc>] load_module+0x1954/0x1ce0
[<ffffffc00011ac38>] SyS_finit_module+0x78/0x88
[<ffffffc000085cac>] el0_svc_naked+0x20/0x28
Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
---[ end trace 3249daca187c36b0 ]---

Thanks
Phil

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On Thu, 12 Nov 2015 08:57:03 +0000
Phil Edworthy <phil.edworthy@renesas.com> wrote:

> Hi Marc,
> 
> On 11 November 2015 16:38, Marc Zyngier wrote:
> > On Tue, 10 Nov 2015 16:52:33 +0100
> > Thierry Reding <treding@nvidia.com> wrote:
> > 
> > > On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > > > Hi Thierry,
> > > >
> > > > On 09 November 2015 17:24, Phil wrote:
> > > > > On 09 November 2015 16:11, Thierry wrote:
> > > > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > > > > >
> > > > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > > > but not the PCI controller's node.
> > > > > > > >
> > > > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > > > to call msi_check().
> > > > > > > >
> > > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > > > ---
> > > > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > > >
> > > > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > > > > index 2377bf0..c6fa562 100644
> > > > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > > > > *pcie)
> > > > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > > > >
> > > > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > > > INT_PCI_MSI_NR,
> > > > > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > > > > >  					    &msi_domain_ops, &msi-
> > >chip);
> > > > > > > >  	if (!msi->domain) {
> > > > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > > > >
> > > > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > > > MSIs. And looking at the code here it seems like the same would apply to
> > > > > > RCAR.
> > > > > Yes you are correct here.
> > > > >
> > > > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > > > > anything.
> > > > > >
> > > > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > > > going to prevent an oops? Perhaps this is one of those reference count
> > > > > > imbalance bugs that have recently been showing up?
> > > > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > > > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > > > > struct device::msi_domain") return an uninitialized msi domain that leads
> > > > > to the oops. It appears that these changes assume that msi interrupt
> > > > > controller is separate from the PCI controller.
> > > > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > > > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > > > dev->msi_domain is uninitialized.
> > >
> > > Marc, any idea what's going on here?
> > 
> > Thanks for putting me in the loop.
> > 
> > No precise idea yet, but the proposed fix definitely looks like the
> > wrong one. Actually, not passing a node identifier to any domain
> > constructor is pretty much always a mistake when using DT.
> > 
> > Can someone post a stack trace for this issue so that I can have a
> > look? I'm currently traveling, so expect a slightly delayed reply...
> 
> Unfortunately, not all the code for this arm64 board is upstream
> yet, this code base is off 4.3-rc7.

Oh, this is arm64? Well, you're not supposed to use the old
msi_controller stuff on arm64 - I really want all arm64 controllers to
be converted to generic MSI domains. Please have a look at the xgene
code, for example.

But irrespective of that, I share Thierry's skepticism:

> systemd-udevd[1315]: undefined instruction: pcÿffffc03106d41c
> Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
> Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
> Modules linked in: e1000e(+)
> CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
> Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
> task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
> PC is at 0xffffffc03106d41c

You are clearly jumping to nowhereland, and I doubt this is related to
the domain of_node being set. Are you overriding arch_setup_msi_irq one
way or another?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny.

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On Thu, 12 Nov 2015 08:57:03 +0000
Phil Edworthy <phil.edworthy@renesas.com> wrote:

> Hi Marc,
> 
> On 11 November 2015 16:38, Marc Zyngier wrote:
> > On Tue, 10 Nov 2015 16:52:33 +0100
> > Thierry Reding <treding@nvidia.com> wrote:
> > 
> > > On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > > > Hi Thierry,
> > > >
> > > > On 09 November 2015 17:24, Phil wrote:
> > > > > On 09 November 2015 16:11, Thierry wrote:
> > > > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > > > cc'ing others (Tegra, Altera, Designware) who may have the same bug
> > > > > > >
> > > > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > > > but not the PCI controller's node.
> > > > > > > >
> > > > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > > > to call msi_check().
> > > > > > > >
> > > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > > > ---
> > > > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > > >
> > > > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c
> > > > > > > > index 2377bf0..c6fa562 100644
> > > > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct rcar_pcie
> > > > > *pcie)
> > > > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > > > >
> > > > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > > > INT_PCI_MSI_NR,
> > > > > > > > +	msi->domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> > > > > > > >  					    &msi_domain_ops, &msi-
> > >chip);
> > > > > > > >  	if (!msi->domain) {
> > > > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > > > >
> > > > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > > > MSIs. And looking at the code here it seems like the same would apply to
> > > > > > RCAR.
> > > > > Yes you are correct here.
> > > > >
> > > > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > > > fail. The default implementation (msi_domain_ops_check()) doesn't do
> > > > > > anything.
> > > > > >
> > > > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > > > going to prevent an oops? Perhaps this is one of those reference count
> > > > > > imbalance bugs that have recently been showing up?
> > > > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field from
> > > > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain use
> > > > > struct device::msi_domain") return an uninitialized msi domain that leads
> > > > > to the oops. It appears that these changes assume that msi interrupt
> > > > > controller is separate from the PCI controller.
> > > > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > > > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > > > dev->msi_domain is uninitialized.
> > >
> > > Marc, any idea what's going on here?
> > 
> > Thanks for putting me in the loop.
> > 
> > No precise idea yet, but the proposed fix definitely looks like the
> > wrong one. Actually, not passing a node identifier to any domain
> > constructor is pretty much always a mistake when using DT.
> > 
> > Can someone post a stack trace for this issue so that I can have a
> > look? I'm currently traveling, so expect a slightly delayed reply...
> 
> Unfortunately, not all the code for this arm64 board is upstream
> yet, this code base is off 4.3-rc7.

Oh, this is arm64? Well, you're not supposed to use the old
msi_controller stuff on arm64 - I really want all arm64 controllers to
be converted to generic MSI domains. Please have a look at the xgene
code, for example.

But irrespective of that, I share Thierry's skepticism:

> systemd-udevd[1315]: undefined instruction: pc=ffffffc03106d41c
> Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
> Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
> Modules linked in: e1000e(+)
> CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
> Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
> task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
> PC is at 0xffffffc03106d41c

You are clearly jumping to nowhereland, and I doubt this is related to
the domain of_node being set. Are you overriding arch_setup_msi_irq one
way or another?

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny.

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 12 November 2015 20:31, Marc Zyngier wrote:
> Phil Edworthy <phil.edworthy@renesas.com> wrote:
> > On 11 November 2015 16:38, Marc Zyngier wrote:
> > > On Tue, 10 Nov 2015 16:52:33 +0100
> > > Thierry Reding <treding@nvidia.com> wrote:
> > >
> > > > On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > > > > Hi Thierry,
> > > > >
> > > > > On 09 November 2015 17:24, Phil wrote:
> > > > > > On 09 November 2015 16:11, Thierry wrote:
> > > > > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > > > > cc'ing others (Tegra, Altera, Designware) who may have the same
> bug
> > > > > > > >
> > > > > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > > > > but not the PCI controller's node.
> > > > > > > > >
> > > > > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > > > > to call msi_check().
> > > > > > > > >
> > > > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > > > > ---
> > > > > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > > > >
> > > > > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-
> rcar.c
> > > > > > > > > index 2377bf0..c6fa562 100644
> > > > > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct
> rcar_pcie
> > > > > > *pcie)
> > > > > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > > > > >
> > > > > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > > > > INT_PCI_MSI_NR,
> > > > > > > > > +	msi->domain = irq_domain_add_linear(NULL,
> INT_PCI_MSI_NR,
> > > > > > > > >  					    &msi_domain_ops, &msi-
> > > >chip);
> > > > > > > > >  	if (!msi->domain) {
> > > > > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > > > > >
> > > > > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > > > > MSIs. And looking at the code here it seems like the same would apply
> to
> > > > > > > RCAR.
> > > > > > Yes you are correct here.
> > > > > >
> > > > > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > > > > fail. The default implementation (msi_domain_ops_check()) doesn't
> do
> > > > > > > anything.
> > > > > > >
> > > > > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > > > > going to prevent an oops? Perhaps this is one of those reference
> count
> > > > > > > imbalance bugs that have recently been showing up?
> > > > > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > > > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field
> from
> > > > > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain
> use
> > > > > > struct device::msi_domain") return an uninitialized msi domain that
> leads
> > > > > > to the oops. It appears that these changes assume that msi interrupt
> > > > > > controller is separate from the PCI controller.
> > > > > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > > > > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > > > > dev->msi_domain is uninitialized.
> > > >
> > > > Marc, any idea what's going on here?
> > >
> > > Thanks for putting me in the loop.
> > >
> > > No precise idea yet, but the proposed fix definitely looks like the
> > > wrong one. Actually, not passing a node identifier to any domain
> > > constructor is pretty much always a mistake when using DT.
> > >
> > > Can someone post a stack trace for this issue so that I can have a
> > > look? I'm currently traveling, so expect a slightly delayed reply...
> >
> > Unfortunately, not all the code for this arm64 board is upstream
> > yet, this code base is off 4.3-rc7.
> 
> Oh, this is arm64? Well, you're not supposed to use the old
> msi_controller stuff on arm64 - I really want all arm64 controllers to
> be converted to generic MSI domains. Please have a look at the xgene
> code, for example.
Oh right, I wasn't aware of that. I had hoped that drivers weren't so
arch specific...

 
> But irrespective of that, I share Thierry's skepticism:
> 
> > systemd-udevd[1315]: undefined instruction: pcÿffffc03106d41c
> > Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
> > Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
> > Modules linked in: e1000e(+)
> > CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
> > Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
> > task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
> > PC is at 0xffffffc03106d41c
> 
> You are clearly jumping to nowhereland, and I doubt this is related to
> the domain of_node being set. Are you overriding arch_setup_msi_irq one
> way or another?
No, I'm not overriding arch_setup_msi_irq at all.

Since the stack trace doesn't help that much I added some tracing:
pci_msi_setup_msi_irqs()
  calls pci_msi_get_domain()
    calls dev_get_msi_domain(), gets a non-NULL domain.
pci_msi_setup_msi_irqs()
  calls pci_msi_domain_alloc_irqs()
    calls msi_domain_alloc_irqs()
msi_domain_alloc_irqs:273: opsÿffffc03193a810
msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
That looks to me as though msi_check is off pointing to the weeds.

By passing a NULL domain into irq_domain_add_linear() you get:
pci_msi_setup_msi_irqs()
  calls pci_msi_get_domain()
    calls dev_get_msi_domain(), gets a NULL domain.
    calls arch_setup_msi_irq()
All ok then.

Thanks for your help,
Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 12 November 2015 20:31, Marc Zyngier wrote:
> Phil Edworthy <phil.edworthy@renesas.com> wrote:
> > On 11 November 2015 16:38, Marc Zyngier wrote:
> > > On Tue, 10 Nov 2015 16:52:33 +0100
> > > Thierry Reding <treding@nvidia.com> wrote:
> > >
> > > > On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
> > > > > Hi Thierry,
> > > > >
> > > > > On 09 November 2015 17:24, Phil wrote:
> > > > > > On 09 November 2015 16:11, Thierry wrote:
> > > > > > > On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
> > > > > > > > cc'ing others (Tegra, Altera, Designware) who may have the same
> bug
> > > > > > > >
> > > > > > > > On 03 November 2015 09:28, Phil Edworthy wrote:
> > > > > > > > > The OF node passed to irq_domain_add_linear() should be a
> > > > > > > > > pointer to interrupt controller's device tree node, or NULL,
> > > > > > > > > but not the PCI controller's node.
> > > > > > > > >
> > > > > > > > > This fixes an oops in msi_domain_alloc_irqs() when it tries
> > > > > > > > > to call msi_check().
> > > > > > > > >
> > > > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
> > > > > > > > > ---
> > > > > > > > >  drivers/pci/host/pcie-rcar.c | 2 +-
> > > > > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > > > > >
> > > > > > > > > diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-
> rcar.c
> > > > > > > > > index 2377bf0..c6fa562 100644
> > > > > > > > > --- a/drivers/pci/host/pcie-rcar.c
> > > > > > > > > +++ b/drivers/pci/host/pcie-rcar.c
> > > > > > > > > @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct
> rcar_pcie
> > > > > > *pcie)
> > > > > > > > >  	msi->chip.setup_irq = rcar_msi_setup_irq;
> > > > > > > > >  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
> > > > > > > > >
> > > > > > > > > -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > > > > > > > > INT_PCI_MSI_NR,
> > > > > > > > > +	msi->domain = irq_domain_add_linear(NULL,
> INT_PCI_MSI_NR,
> > > > > > > > >  					    &msi_domain_ops, &msi-
> > > >chip);
> > > > > > > > >  	if (!msi->domain) {
> > > > > > > > >  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
> > > > > > >
> > > > > > > On Tegra the PCI controller is in fact the interrupt controller for
> > > > > > > MSIs. And looking at the code here it seems like the same would apply
> to
> > > > > > > RCAR.
> > > > > > Yes you are correct here.
> > > > > >
> > > > > > > I'm also slightly confused as to why this would cause ->msi_check() to
> > > > > > > fail. The default implementation (msi_domain_ops_check()) doesn't
> do
> > > > > > > anything.
> > > > > > >
> > > > > > > Also, how is passing in NULL instead of a valid struct device_node *
> > > > > > > going to prevent an oops? Perhaps this is one of those reference
> count
> > > > > > > imbalance bugs that have recently been showing up?
> > > > > > On arm64 (previously I didn't realise this just affects arm64, not arm),
> > > > > > the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field
> from
> > > > > > msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain
> use
> > > > > > struct device::msi_domain") return an uninitialized msi domain that
> leads
> > > > > > to the oops. It appears that these changes assume that msi interrupt
> > > > > > controller is separate from the PCI controller.
> > > > > More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
> > > > > pci_msi_get_domain() calls dev_get_msi_domain() and at this point
> > > > > dev->msi_domain is uninitialized.
> > > >
> > > > Marc, any idea what's going on here?
> > >
> > > Thanks for putting me in the loop.
> > >
> > > No precise idea yet, but the proposed fix definitely looks like the
> > > wrong one. Actually, not passing a node identifier to any domain
> > > constructor is pretty much always a mistake when using DT.
> > >
> > > Can someone post a stack trace for this issue so that I can have a
> > > look? I'm currently traveling, so expect a slightly delayed reply...
> >
> > Unfortunately, not all the code for this arm64 board is upstream
> > yet, this code base is off 4.3-rc7.
> 
> Oh, this is arm64? Well, you're not supposed to use the old
> msi_controller stuff on arm64 - I really want all arm64 controllers to
> be converted to generic MSI domains. Please have a look at the xgene
> code, for example.
Oh right, I wasn't aware of that. I had hoped that drivers weren't so
arch specific...

 
> But irrespective of that, I share Thierry's skepticism:
> 
> > systemd-udevd[1315]: undefined instruction: pc=ffffffc03106d41c
> > Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
> > Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
> > Modules linked in: e1000e(+)
> > CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
> > Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
> > task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
> > PC is at 0xffffffc03106d41c
> 
> You are clearly jumping to nowhereland, and I doubt this is related to
> the domain of_node being set. Are you overriding arch_setup_msi_irq one
> way or another?
No, I'm not overriding arch_setup_msi_irq at all.

Since the stack trace doesn't help that much I added some tracing:
pci_msi_setup_msi_irqs()
  calls pci_msi_get_domain()
    calls dev_get_msi_domain(), gets a non-NULL domain.
pci_msi_setup_msi_irqs()
  calls pci_msi_domain_alloc_irqs()
    calls msi_domain_alloc_irqs()
msi_domain_alloc_irqs:273: ops=ffffffc03193a810
msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
That looks to me as though msi_check is off pointing to the weeds.

By passing a NULL domain into irq_domain_add_linear() you get:
pci_msi_setup_msi_irqs()
  calls pci_msi_get_domain()
    calls dev_get_msi_domain(), gets a NULL domain.
    calls arch_setup_msi_irq()
All ok then.

Thanks for your help,
Phil

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On 13/11/15 09:36, Phil Edworthy wrote:
> Hi Marc,
> 
> On 12 November 2015 20:31, Marc Zyngier wrote:
>> Phil Edworthy <phil.edworthy@renesas.com> wrote:
>>> On 11 November 2015 16:38, Marc Zyngier wrote:
>>>> On Tue, 10 Nov 2015 16:52:33 +0100
>>>> Thierry Reding <treding@nvidia.com> wrote:
>>>>
>>>>> On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
>>>>>> Hi Thierry,
>>>>>>
>>>>>> On 09 November 2015 17:24, Phil wrote:
>>>>>>> On 09 November 2015 16:11, Thierry wrote:
>>>>>>>> On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
>>>>>>>>> cc'ing others (Tegra, Altera, Designware) who may have the same
>> bug
>>>>>>>>>
>>>>>>>>> On 03 November 2015 09:28, Phil Edworthy wrote:
>>>>>>>>>> The OF node passed to irq_domain_add_linear() should be a
>>>>>>>>>> pointer to interrupt controller's device tree node, or NULL,
>>>>>>>>>> but not the PCI controller's node.
>>>>>>>>>>
>>>>>>>>>> This fixes an oops in msi_domain_alloc_irqs() when it tries
>>>>>>>>>> to call msi_check().
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
>>>>>>>>>> ---
>>>>>>>>>>  drivers/pci/host/pcie-rcar.c | 2 +-
>>>>>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>>>>
>>>>>>>>>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-
>> rcar.c
>>>>>>>>>> index 2377bf0..c6fa562 100644
>>>>>>>>>> --- a/drivers/pci/host/pcie-rcar.c
>>>>>>>>>> +++ b/drivers/pci/host/pcie-rcar.c
>>>>>>>>>> @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct
>> rcar_pcie
>>>>>>> *pcie)
>>>>>>>>>>  	msi->chip.setup_irq = rcar_msi_setup_irq;
>>>>>>>>>>  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
>>>>>>>>>>
>>>>>>>>>> -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
>>>>>>>>>> INT_PCI_MSI_NR,
>>>>>>>>>> +	msi->domain = irq_domain_add_linear(NULL,
>> INT_PCI_MSI_NR,
>>>>>>>>>>  					    &msi_domain_ops, &msi-
>>>>> chip);
>>>>>>>>>>  	if (!msi->domain) {
>>>>>>>>>>  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
>>>>>>>>
>>>>>>>> On Tegra the PCI controller is in fact the interrupt controller for
>>>>>>>> MSIs. And looking at the code here it seems like the same would apply
>> to
>>>>>>>> RCAR.
>>>>>>> Yes you are correct here.
>>>>>>>
>>>>>>>> I'm also slightly confused as to why this would cause ->msi_check() to
>>>>>>>> fail. The default implementation (msi_domain_ops_check()) doesn't
>> do
>>>>>>>> anything.
>>>>>>>>
>>>>>>>> Also, how is passing in NULL instead of a valid struct device_node *
>>>>>>>> going to prevent an oops? Perhaps this is one of those reference
>> count
>>>>>>>> imbalance bugs that have recently been showing up?
>>>>>>> On arm64 (previously I didn't realise this just affects arm64, not arm),
>>>>>>> the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field
>> from
>>>>>>> msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain
>> use
>>>>>>> struct device::msi_domain") return an uninitialized msi domain that
>> leads
>>>>>>> to the oops. It appears that these changes assume that msi interrupt
>>>>>>> controller is separate from the PCI controller.
>>>>>> More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
>>>>>> pci_msi_get_domain() calls dev_get_msi_domain() and at this point
>>>>>> dev->msi_domain is uninitialized.
>>>>>
>>>>> Marc, any idea what's going on here?
>>>>
>>>> Thanks for putting me in the loop.
>>>>
>>>> No precise idea yet, but the proposed fix definitely looks like the
>>>> wrong one. Actually, not passing a node identifier to any domain
>>>> constructor is pretty much always a mistake when using DT.
>>>>
>>>> Can someone post a stack trace for this issue so that I can have a
>>>> look? I'm currently traveling, so expect a slightly delayed reply...
>>>
>>> Unfortunately, not all the code for this arm64 board is upstream
>>> yet, this code base is off 4.3-rc7.
>>
>> Oh, this is arm64? Well, you're not supposed to use the old
>> msi_controller stuff on arm64 - I really want all arm64 controllers to
>> be converted to generic MSI domains. Please have a look at the xgene
>> code, for example.
> Oh right, I wasn't aware of that. I had hoped that drivers weren't so
> arch specific...

They are not. Generic MSI domains are supported on all other
architectures that select this option (arm, x86).

>> But irrespective of that, I share Thierry's skepticism:
>>
>>> systemd-udevd[1315]: undefined instruction: pcÿffffc03106d41c
>>> Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
>>> Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
>>> Modules linked in: e1000e(+)
>>> CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
>>> Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
>>> task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
>>> PC is at 0xffffffc03106d41c
>>
>> You are clearly jumping to nowhereland, and I doubt this is related to
>> the domain of_node being set. Are you overriding arch_setup_msi_irq one
>> way or another?
> No, I'm not overriding arch_setup_msi_irq at all.
> 
> Since the stack trace doesn't help that much I added some tracing:
> pci_msi_setup_msi_irqs()
>   calls pci_msi_get_domain()
>     calls dev_get_msi_domain(), gets a non-NULL domain.
> pci_msi_setup_msi_irqs()
>   calls pci_msi_domain_alloc_irqs()
>     calls msi_domain_alloc_irqs()
> msi_domain_alloc_irqs:273: opsÿffffc03193a810
> msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
> systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
> That looks to me as though msi_check is off pointing to the weeds.

So the next step is to find out who initializes msi_check. Assuming
someone does...

> By passing a NULL domain into irq_domain_add_linear() you get:
> pci_msi_setup_msi_irqs()
>   calls pci_msi_get_domain()
>     calls dev_get_msi_domain(), gets a NULL domain.
>     calls arch_setup_msi_irq()
> All ok then.

Yes, because you're sidestepping the issue. Any chance you could dig a
bit deeper? I'd really like to nail this one down (before we convert
your PCI driver to the right API... ;-).

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On 13/11/15 09:36, Phil Edworthy wrote:
> Hi Marc,
> 
> On 12 November 2015 20:31, Marc Zyngier wrote:
>> Phil Edworthy <phil.edworthy@renesas.com> wrote:
>>> On 11 November 2015 16:38, Marc Zyngier wrote:
>>>> On Tue, 10 Nov 2015 16:52:33 +0100
>>>> Thierry Reding <treding@nvidia.com> wrote:
>>>>
>>>>> On Mon, Nov 09, 2015 at 06:01:49PM +0000, Phil Edworthy wrote:
>>>>>> Hi Thierry,
>>>>>>
>>>>>> On 09 November 2015 17:24, Phil wrote:
>>>>>>> On 09 November 2015 16:11, Thierry wrote:
>>>>>>>> On Mon, Nov 09, 2015 at 03:20:24PM +0000, Phil Edworthy wrote:
>>>>>>>>> cc'ing others (Tegra, Altera, Designware) who may have the same
>> bug
>>>>>>>>>
>>>>>>>>> On 03 November 2015 09:28, Phil Edworthy wrote:
>>>>>>>>>> The OF node passed to irq_domain_add_linear() should be a
>>>>>>>>>> pointer to interrupt controller's device tree node, or NULL,
>>>>>>>>>> but not the PCI controller's node.
>>>>>>>>>>
>>>>>>>>>> This fixes an oops in msi_domain_alloc_irqs() when it tries
>>>>>>>>>> to call msi_check().
>>>>>>>>>>
>>>>>>>>>> Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
>>>>>>>>>> ---
>>>>>>>>>>  drivers/pci/host/pcie-rcar.c | 2 +-
>>>>>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>>>>
>>>>>>>>>> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-
>> rcar.c
>>>>>>>>>> index 2377bf0..c6fa562 100644
>>>>>>>>>> --- a/drivers/pci/host/pcie-rcar.c
>>>>>>>>>> +++ b/drivers/pci/host/pcie-rcar.c
>>>>>>>>>> @@ -709,7 +709,7 @@ static int rcar_pcie_enable_msi(struct
>> rcar_pcie
>>>>>>> *pcie)
>>>>>>>>>>  	msi->chip.setup_irq = rcar_msi_setup_irq;
>>>>>>>>>>  	msi->chip.teardown_irq = rcar_msi_teardown_irq;
>>>>>>>>>>
>>>>>>>>>> -	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
>>>>>>>>>> INT_PCI_MSI_NR,
>>>>>>>>>> +	msi->domain = irq_domain_add_linear(NULL,
>> INT_PCI_MSI_NR,
>>>>>>>>>>  					    &msi_domain_ops, &msi-
>>>>> chip);
>>>>>>>>>>  	if (!msi->domain) {
>>>>>>>>>>  		dev_err(&pdev->dev, "failed to create IRQ domain\n");
>>>>>>>>
>>>>>>>> On Tegra the PCI controller is in fact the interrupt controller for
>>>>>>>> MSIs. And looking at the code here it seems like the same would apply
>> to
>>>>>>>> RCAR.
>>>>>>> Yes you are correct here.
>>>>>>>
>>>>>>>> I'm also slightly confused as to why this would cause ->msi_check() to
>>>>>>>> fail. The default implementation (msi_domain_ops_check()) doesn't
>> do
>>>>>>>> anything.
>>>>>>>>
>>>>>>>> Also, how is passing in NULL instead of a valid struct device_node *
>>>>>>>> going to prevent an oops? Perhaps this is one of those reference
>> count
>>>>>>>> imbalance bugs that have recently been showing up?
>>>>>>> On arm64 (previously I didn't realise this just affects arm64, not arm),
>>>>>>> the changes in commit f075915ac0b11 ("PCI/MSI: Drop domain field
>> from
>>>>>>> msi_controller") and d8a1cb757550 ("PCI/MSI: Let pci_msi_get_domain
>> use
>>>>>>> struct device::msi_domain") return an uninitialized msi domain that
>> leads
>>>>>>> to the oops. It appears that these changes assume that msi interrupt
>>>>>>> controller is separate from the PCI controller.
>>>>>> More accurately, when CONFIG_GENERIC_MSI_IRQ_DOMAIN is enabled,
>>>>>> pci_msi_get_domain() calls dev_get_msi_domain() and at this point
>>>>>> dev->msi_domain is uninitialized.
>>>>>
>>>>> Marc, any idea what's going on here?
>>>>
>>>> Thanks for putting me in the loop.
>>>>
>>>> No precise idea yet, but the proposed fix definitely looks like the
>>>> wrong one. Actually, not passing a node identifier to any domain
>>>> constructor is pretty much always a mistake when using DT.
>>>>
>>>> Can someone post a stack trace for this issue so that I can have a
>>>> look? I'm currently traveling, so expect a slightly delayed reply...
>>>
>>> Unfortunately, not all the code for this arm64 board is upstream
>>> yet, this code base is off 4.3-rc7.
>>
>> Oh, this is arm64? Well, you're not supposed to use the old
>> msi_controller stuff on arm64 - I really want all arm64 controllers to
>> be converted to generic MSI domains. Please have a look at the xgene
>> code, for example.
> Oh right, I wasn't aware of that. I had hoped that drivers weren't so
> arch specific...

They are not. Generic MSI domains are supported on all other
architectures that select this option (arm, x86).

>> But irrespective of that, I share Thierry's skepticism:
>>
>>> systemd-udevd[1315]: undefined instruction: pc=ffffffc03106d41c
>>> Code: ffffffc0 311f9740 ffffffc0 3106d138 (ffffffc0)
>>> Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP
>>> Modules linked in: e1000e(+)
>>> CPU: 0 PID: 1315 Comm: systemd-udevd Not tainted 4.3.0-rc7+ #4
>>> Hardware name: Renesas Salvator-X board based on r8a7795 (DT)
>>> task: ffffffc0307af080 ti: ffffffc030ecc000 task.ti: ffffffc030ecc000
>>> PC is at 0xffffffc03106d41c
>>
>> You are clearly jumping to nowhereland, and I doubt this is related to
>> the domain of_node being set. Are you overriding arch_setup_msi_irq one
>> way or another?
> No, I'm not overriding arch_setup_msi_irq at all.
> 
> Since the stack trace doesn't help that much I added some tracing:
> pci_msi_setup_msi_irqs()
>   calls pci_msi_get_domain()
>     calls dev_get_msi_domain(), gets a non-NULL domain.
> pci_msi_setup_msi_irqs()
>   calls pci_msi_domain_alloc_irqs()
>     calls msi_domain_alloc_irqs()
> msi_domain_alloc_irqs:273: ops=ffffffc03193a810
> msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
> systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
> That looks to me as though msi_check is off pointing to the weeds.

So the next step is to find out who initializes msi_check. Assuming
someone does...

> By passing a NULL domain into irq_domain_add_linear() you get:
> pci_msi_setup_msi_irqs()
>   calls pci_msi_get_domain()
>     calls dev_get_msi_domain(), gets a NULL domain.
>     calls arch_setup_msi_irq()
> All ok then.

Yes, because you're sidestepping the issue. Any chance you could dig a
bit deeper? I'd really like to nail this one down (before we convert
your PCI driver to the right API... ;-).

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 16 November 2015 18:31, Marc Zyngier wrote:
> On 13/11/15 09:36, Phil Edworthy wrote:
<snip>
> > Since the stack trace doesn't help that much I added some tracing:
> > pci_msi_setup_msi_irqs()
> >   calls pci_msi_get_domain()
> >     calls dev_get_msi_domain(), gets a non-NULL domain.
> > pci_msi_setup_msi_irqs()
> >   calls pci_msi_domain_alloc_irqs()
> >     calls msi_domain_alloc_irqs()
> > msi_domain_alloc_irqs:273: opsÿffffc03193a810
> > msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
> > systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
> > That looks to me as though msi_check is off pointing to the weeds.
> 
> So the next step is to find out who initializes msi_check. Assuming
> someone does...
Nothing initializes msi_check... 

 
> > By passing a NULL domain into irq_domain_add_linear() you get:
> > pci_msi_setup_msi_irqs()
> >   calls pci_msi_get_domain()
> >     calls dev_get_msi_domain(), gets a NULL domain.
> >     calls arch_setup_msi_irq()
> > All ok then.
> 
> Yes, because you're sidestepping the issue. Any chance you could dig a
> bit deeper? I'd really like to nail this one down (before we convert
> your PCI driver to the right API... ;-).
The problem appears to be that when the pci host driver enables msi
it calls the following:
	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
					    &msi_domain_ops, &msi->chip);
The last arg is documented as:
* @host_data: Controller private data pointer 
In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.

However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
struct msi_domain_info.

It seems that a number of other pci host drivers do the same, so I am
surprised that no one else has seen this.

Thanks for your help,
Phil

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 16 November 2015 18:31, Marc Zyngier wrote:
> On 13/11/15 09:36, Phil Edworthy wrote:
<snip>
> > Since the stack trace doesn't help that much I added some tracing:
> > pci_msi_setup_msi_irqs()
> >   calls pci_msi_get_domain()
> >     calls dev_get_msi_domain(), gets a non-NULL domain.
> > pci_msi_setup_msi_irqs()
> >   calls pci_msi_domain_alloc_irqs()
> >     calls msi_domain_alloc_irqs()
> > msi_domain_alloc_irqs:273: ops=ffffffc03193a810
> > msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
> > systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
> > That looks to me as though msi_check is off pointing to the weeds.
> 
> So the next step is to find out who initializes msi_check. Assuming
> someone does...
Nothing initializes msi_check... 

 
> > By passing a NULL domain into irq_domain_add_linear() you get:
> > pci_msi_setup_msi_irqs()
> >   calls pci_msi_get_domain()
> >     calls dev_get_msi_domain(), gets a NULL domain.
> >     calls arch_setup_msi_irq()
> > All ok then.
> 
> Yes, because you're sidestepping the issue. Any chance you could dig a
> bit deeper? I'd really like to nail this one down (before we convert
> your PCI driver to the right API... ;-).
The problem appears to be that when the pci host driver enables msi
it calls the following:
	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
					    &msi_domain_ops, &msi->chip);
The last arg is documented as:
* @host_data: Controller private data pointer 
In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.

However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
struct msi_domain_info.

It seems that a number of other pci host drivers do the same, so I am
surprised that no one else has seen this.

Thanks for your help,
Phil

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On 18/11/15 18:01, Phil Edworthy wrote:
> Hi Marc,
> 
> On 16 November 2015 18:31, Marc Zyngier wrote:
>> On 13/11/15 09:36, Phil Edworthy wrote:
> <snip>
>>> Since the stack trace doesn't help that much I added some tracing:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a non-NULL domain.
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_domain_alloc_irqs()
>>>     calls msi_domain_alloc_irqs()
>>> msi_domain_alloc_irqs:273: opsÿffffc03193a810
>>> msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
>>> systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
>>> That looks to me as though msi_check is off pointing to the weeds.
>>
>> So the next step is to find out who initializes msi_check. Assuming
>> someone does...
> Nothing initializes msi_check... 
> 
>  
>>> By passing a NULL domain into irq_domain_add_linear() you get:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a NULL domain.
>>>     calls arch_setup_msi_irq()
>>> All ok then.
>>
>> Yes, because you're sidestepping the issue. Any chance you could dig a
>> bit deeper? I'd really like to nail this one down (before we convert
>> your PCI driver to the right API... ;-).
> The problem appears to be that when the pci host driver enables msi
> it calls the following:
> 	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> 					    &msi_domain_ops, &msi->chip);
> The last arg is documented as:
> * @host_data: Controller private data pointer 
> In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> 
> However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> struct msi_domain_info.
> 
> It seems that a number of other pci host drivers do the same, so I am
> surprised that no one else has seen this.

Yup, me too. Feels like a massive blunder. I'll cook something.

Thanks a lot for tracking this.

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On 18/11/15 18:01, Phil Edworthy wrote:
> Hi Marc,
> 
> On 16 November 2015 18:31, Marc Zyngier wrote:
>> On 13/11/15 09:36, Phil Edworthy wrote:
> <snip>
>>> Since the stack trace doesn't help that much I added some tracing:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a non-NULL domain.
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_domain_alloc_irqs()
>>>     calls msi_domain_alloc_irqs()
>>> msi_domain_alloc_irqs:273: ops=ffffffc03193a810
>>> msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
>>> systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
>>> That looks to me as though msi_check is off pointing to the weeds.
>>
>> So the next step is to find out who initializes msi_check. Assuming
>> someone does...
> Nothing initializes msi_check... 
> 
>  
>>> By passing a NULL domain into irq_domain_add_linear() you get:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a NULL domain.
>>>     calls arch_setup_msi_irq()
>>> All ok then.
>>
>> Yes, because you're sidestepping the issue. Any chance you could dig a
>> bit deeper? I'd really like to nail this one down (before we convert
>> your PCI driver to the right API... ;-).
> The problem appears to be that when the pci host driver enables msi
> it calls the following:
> 	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> 					    &msi_domain_ops, &msi->chip);
> The last arg is documented as:
> * @host_data: Controller private data pointer 
> In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> 
> However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> struct msi_domain_info.
> 
> It seems that a number of other pci host drivers do the same, so I am
> surprised that no one else has seen this.

Yup, me too. Feels like a massive blunder. I'll cook something.

Thanks a lot for tracking this.

	M.
-- 
Jazz is not dead. It just smells funny...

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On 18/11/15 18:01, Phil Edworthy wrote:
> Hi Marc,
> 
> On 16 November 2015 18:31, Marc Zyngier wrote:
>> On 13/11/15 09:36, Phil Edworthy wrote:
> <snip>
>>> Since the stack trace doesn't help that much I added some tracing:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a non-NULL domain.
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_domain_alloc_irqs()
>>>     calls msi_domain_alloc_irqs()
>>> msi_domain_alloc_irqs:273: opsÿffffc03193a810
>>> msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
>>> systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
>>> That looks to me as though msi_check is off pointing to the weeds.
>>
>> So the next step is to find out who initializes msi_check. Assuming
>> someone does...
> Nothing initializes msi_check... 
> 
>  
>>> By passing a NULL domain into irq_domain_add_linear() you get:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a NULL domain.
>>>     calls arch_setup_msi_irq()
>>> All ok then.
>>
>> Yes, because you're sidestepping the issue. Any chance you could dig a
>> bit deeper? I'd really like to nail this one down (before we convert
>> your PCI driver to the right API... ;-).
> The problem appears to be that when the pci host driver enables msi
> it calls the following:
> 	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> 					    &msi_domain_ops, &msi->chip);
> The last arg is documented as:
> * @host_data: Controller private data pointer 
> In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> 
> However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> struct msi_domain_info.
> 
> It seems that a number of other pci host drivers do the same, so I am
> surprised that no one else has seen this.

Can you please give this hack a go and let me know if that helps?

Thanks,

	M.

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 53e4632..7eaa4c8 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -54,7 +54,7 @@ static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	struct irq_domain *domain;
 
 	domain = pci_msi_get_domain(dev);
-	if (domain)
+	if (domain && irq_domain_is_hierarchy(domain))
 		return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
 
 	return arch_setup_msi_irqs(dev, nvec, type);
@@ -65,7 +65,7 @@ static void pci_msi_teardown_msi_irqs(struct pci_dev *dev)
 	struct irq_domain *domain;
 
 	domain = pci_msi_get_domain(dev);
-	if (domain)
+	if (domain && irq_domain_is_hierarchy(domain))
 		pci_msi_domain_free_irqs(domain, dev);
 	else
 		arch_teardown_msi_irqs(dev);

-- 
Jazz is not dead. It just smells funny...

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On 18/11/15 18:01, Phil Edworthy wrote:
> Hi Marc,
> 
> On 16 November 2015 18:31, Marc Zyngier wrote:
>> On 13/11/15 09:36, Phil Edworthy wrote:
> <snip>
>>> Since the stack trace doesn't help that much I added some tracing:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a non-NULL domain.
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_domain_alloc_irqs()
>>>     calls msi_domain_alloc_irqs()
>>> msi_domain_alloc_irqs:273: ops=ffffffc03193a810
>>> msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
>>> systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
>>> That looks to me as though msi_check is off pointing to the weeds.
>>
>> So the next step is to find out who initializes msi_check. Assuming
>> someone does...
> Nothing initializes msi_check... 
> 
>  
>>> By passing a NULL domain into irq_domain_add_linear() you get:
>>> pci_msi_setup_msi_irqs()
>>>   calls pci_msi_get_domain()
>>>     calls dev_get_msi_domain(), gets a NULL domain.
>>>     calls arch_setup_msi_irq()
>>> All ok then.
>>
>> Yes, because you're sidestepping the issue. Any chance you could dig a
>> bit deeper? I'd really like to nail this one down (before we convert
>> your PCI driver to the right API... ;-).
> The problem appears to be that when the pci host driver enables msi
> it calls the following:
> 	msi->domain = irq_domain_add_linear(pcie->dev->of_node, INT_PCI_MSI_NR,
> 					    &msi_domain_ops, &msi->chip);
> The last arg is documented as:
> * @host_data: Controller private data pointer 
> In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> 
> However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> struct msi_domain_info.
> 
> It seems that a number of other pci host drivers do the same, so I am
> surprised that no one else has seen this.

Can you please give this hack a go and let me know if that helps?

Thanks,

	M.

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 53e4632..7eaa4c8 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -54,7 +54,7 @@ static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 	struct irq_domain *domain;
 
 	domain = pci_msi_get_domain(dev);
-	if (domain)
+	if (domain && irq_domain_is_hierarchy(domain))
 		return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
 
 	return arch_setup_msi_irqs(dev, nvec, type);
@@ -65,7 +65,7 @@ static void pci_msi_teardown_msi_irqs(struct pci_dev *dev)
 	struct irq_domain *domain;
 
 	domain = pci_msi_get_domain(dev);
-	if (domain)
+	if (domain && irq_domain_is_hierarchy(domain))
 		pci_msi_domain_free_irqs(domain, dev);
 	else
 		arch_teardown_msi_irqs(dev);

-- 
Jazz is not dead. It just smells funny...

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 20 November 2015 09:49, Marc Zyngier wrote:
> On 18/11/15 18:01, Phil Edworthy wrote:
> > Hi Marc,
> >
> > On 16 November 2015 18:31, Marc Zyngier wrote:
> >> On 13/11/15 09:36, Phil Edworthy wrote:
> > <snip>
> >>> Since the stack trace doesn't help that much I added some tracing:
> >>> pci_msi_setup_msi_irqs()
> >>>   calls pci_msi_get_domain()
> >>>     calls dev_get_msi_domain(), gets a non-NULL domain.
> >>> pci_msi_setup_msi_irqs()
> >>>   calls pci_msi_domain_alloc_irqs()
> >>>     calls msi_domain_alloc_irqs()
> >>> msi_domain_alloc_irqs:273: opsÿffffc03193a810
> >>> msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
> >>> systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
> >>> That looks to me as though msi_check is off pointing to the weeds.
> >>
> >> So the next step is to find out who initializes msi_check. Assuming
> >> someone does...
> > Nothing initializes msi_check...
> >
> >
> >>> By passing a NULL domain into irq_domain_add_linear() you get:
> >>> pci_msi_setup_msi_irqs()
> >>>   calls pci_msi_get_domain()
> >>>     calls dev_get_msi_domain(), gets a NULL domain.
> >>>     calls arch_setup_msi_irq()
> >>> All ok then.
> >>
> >> Yes, because you're sidestepping the issue. Any chance you could dig a
> >> bit deeper? I'd really like to nail this one down (before we convert
> >> your PCI driver to the right API... ;-).
> > The problem appears to be that when the pci host driver enables msi
> > it calls the following:
> > 	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> INT_PCI_MSI_NR,
> > 					    &msi_domain_ops, &msi->chip);
> > The last arg is documented as:
> > * @host_data: Controller private data pointer
> > In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> >
> > However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> > struct msi_domain_info.
> >
> > It seems that a number of other pci host drivers do the same, so I am
> > surprised that no one else has seen this.
> 
> Can you please give this hack a go and let me know if that helps?
Works for me!

Many thanks
Phil

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 53e4632..7eaa4c8 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -54,7 +54,7 @@ static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int
> nvec, int type)
>  	struct irq_domain *domain;
> 
>  	domain = pci_msi_get_domain(dev);
> -	if (domain)
> +	if (domain && irq_domain_is_hierarchy(domain))
>  		return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
> 
>  	return arch_setup_msi_irqs(dev, nvec, type);
> @@ -65,7 +65,7 @@ static void pci_msi_teardown_msi_irqs(struct pci_dev *dev)
>  	struct irq_domain *domain;
> 
>  	domain = pci_msi_get_domain(dev);
> -	if (domain)
> +	if (domain && irq_domain_is_hierarchy(domain))
>  		pci_msi_domain_free_irqs(domain, dev);
>  	else
>  		arch_teardown_msi_irqs(dev);
> 
> --
> Jazz is not dead. It just smells funny...

RE: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Phil Edworthy]

Hi Marc,

On 20 November 2015 09:49, Marc Zyngier wrote:
> On 18/11/15 18:01, Phil Edworthy wrote:
> > Hi Marc,
> >
> > On 16 November 2015 18:31, Marc Zyngier wrote:
> >> On 13/11/15 09:36, Phil Edworthy wrote:
> > <snip>
> >>> Since the stack trace doesn't help that much I added some tracing:
> >>> pci_msi_setup_msi_irqs()
> >>>   calls pci_msi_get_domain()
> >>>     calls dev_get_msi_domain(), gets a non-NULL domain.
> >>> pci_msi_setup_msi_irqs()
> >>>   calls pci_msi_domain_alloc_irqs()
> >>>     calls msi_domain_alloc_irqs()
> >>> msi_domain_alloc_irqs:273: ops=ffffffc03193a810
> >>> msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
> >>> systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
> >>> That looks to me as though msi_check is off pointing to the weeds.
> >>
> >> So the next step is to find out who initializes msi_check. Assuming
> >> someone does...
> > Nothing initializes msi_check...
> >
> >
> >>> By passing a NULL domain into irq_domain_add_linear() you get:
> >>> pci_msi_setup_msi_irqs()
> >>>   calls pci_msi_get_domain()
> >>>     calls dev_get_msi_domain(), gets a NULL domain.
> >>>     calls arch_setup_msi_irq()
> >>> All ok then.
> >>
> >> Yes, because you're sidestepping the issue. Any chance you could dig a
> >> bit deeper? I'd really like to nail this one down (before we convert
> >> your PCI driver to the right API... ;-).
> > The problem appears to be that when the pci host driver enables msi
> > it calls the following:
> > 	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> INT_PCI_MSI_NR,
> > 					    &msi_domain_ops, &msi->chip);
> > The last arg is documented as:
> > * @host_data: Controller private data pointer
> > In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> >
> > However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> > struct msi_domain_info.
> >
> > It seems that a number of other pci host drivers do the same, so I am
> > surprised that no one else has seen this.
> 
> Can you please give this hack a go and let me know if that helps?
Works for me!

Many thanks
Phil

> diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
> index 53e4632..7eaa4c8 100644
> --- a/drivers/pci/msi.c
> +++ b/drivers/pci/msi.c
> @@ -54,7 +54,7 @@ static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int
> nvec, int type)
>  	struct irq_domain *domain;
> 
>  	domain = pci_msi_get_domain(dev);
> -	if (domain)
> +	if (domain && irq_domain_is_hierarchy(domain))
>  		return pci_msi_domain_alloc_irqs(domain, dev, nvec, type);
> 
>  	return arch_setup_msi_irqs(dev, nvec, type);
> @@ -65,7 +65,7 @@ static void pci_msi_teardown_msi_irqs(struct pci_dev *dev)
>  	struct irq_domain *domain;
> 
>  	domain = pci_msi_get_domain(dev);
> -	if (domain)
> +	if (domain && irq_domain_is_hierarchy(domain))
>  		pci_msi_domain_free_irqs(domain, dev);
>  	else
>  		arch_teardown_msi_irqs(dev);
> 
> --
> Jazz is not dead. It just smells funny...

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On Mon, 23 Nov 2015 09:44:10 +0000
Phil Edworthy <phil.edworthy@renesas.com> wrote:

> Hi Marc,
> 
> On 20 November 2015 09:49, Marc Zyngier wrote:
> > On 18/11/15 18:01, Phil Edworthy wrote:
> > > Hi Marc,
> > >
> > > On 16 November 2015 18:31, Marc Zyngier wrote:
> > >> On 13/11/15 09:36, Phil Edworthy wrote:
> > > <snip>
> > >>> Since the stack trace doesn't help that much I added some tracing:
> > >>> pci_msi_setup_msi_irqs()
> > >>>   calls pci_msi_get_domain()
> > >>>     calls dev_get_msi_domain(), gets a non-NULL domain.
> > >>> pci_msi_setup_msi_irqs()
> > >>>   calls pci_msi_domain_alloc_irqs()
> > >>>     calls msi_domain_alloc_irqs()
> > >>> msi_domain_alloc_irqs:273: opsÿffffc03193a810
> > >>> msi_domain_alloc_irqs:274: ops->msi_checkÿffffc031161418
> > >>> systemd-udevd[1311]: undefined instruction: pcÿffffc03116141c
> > >>> That looks to me as though msi_check is off pointing to the weeds.
> > >>
> > >> So the next step is to find out who initializes msi_check. Assuming
> > >> someone does...
> > > Nothing initializes msi_check...
> > >
> > >
> > >>> By passing a NULL domain into irq_domain_add_linear() you get:
> > >>> pci_msi_setup_msi_irqs()
> > >>>   calls pci_msi_get_domain()
> > >>>     calls dev_get_msi_domain(), gets a NULL domain.
> > >>>     calls arch_setup_msi_irq()
> > >>> All ok then.
> > >>
> > >> Yes, because you're sidestepping the issue. Any chance you could dig a
> > >> bit deeper? I'd really like to nail this one down (before we convert
> > >> your PCI driver to the right API... ;-).
> > > The problem appears to be that when the pci host driver enables msi
> > > it calls the following:
> > > 	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > INT_PCI_MSI_NR,
> > > 					    &msi_domain_ops, &msi->chip);
> > > The last arg is documented as:
> > > * @host_data: Controller private data pointer
> > > In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> > >
> > > However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> > > struct msi_domain_info.
> > >
> > > It seems that a number of other pci host drivers do the same, so I am
> > > surprised that no one else has seen this.
> > 
> > Can you please give this hack a go and let me know if that helps?
> Works for me!

Cool. I'll post a patch with your Reported-by/Tested-by later today.

Thanks a lot.

	M.
-- 
Jazz is not dead. It just smells funny.

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Marc Zyngier]

On Mon, 23 Nov 2015 09:44:10 +0000
Phil Edworthy <phil.edworthy@renesas.com> wrote:

> Hi Marc,
> 
> On 20 November 2015 09:49, Marc Zyngier wrote:
> > On 18/11/15 18:01, Phil Edworthy wrote:
> > > Hi Marc,
> > >
> > > On 16 November 2015 18:31, Marc Zyngier wrote:
> > >> On 13/11/15 09:36, Phil Edworthy wrote:
> > > <snip>
> > >>> Since the stack trace doesn't help that much I added some tracing:
> > >>> pci_msi_setup_msi_irqs()
> > >>>   calls pci_msi_get_domain()
> > >>>     calls dev_get_msi_domain(), gets a non-NULL domain.
> > >>> pci_msi_setup_msi_irqs()
> > >>>   calls pci_msi_domain_alloc_irqs()
> > >>>     calls msi_domain_alloc_irqs()
> > >>> msi_domain_alloc_irqs:273: ops=ffffffc03193a810
> > >>> msi_domain_alloc_irqs:274: ops->msi_check=ffffffc031161418
> > >>> systemd-udevd[1311]: undefined instruction: pc=ffffffc03116141c
> > >>> That looks to me as though msi_check is off pointing to the weeds.
> > >>
> > >> So the next step is to find out who initializes msi_check. Assuming
> > >> someone does...
> > > Nothing initializes msi_check...
> > >
> > >
> > >>> By passing a NULL domain into irq_domain_add_linear() you get:
> > >>> pci_msi_setup_msi_irqs()
> > >>>   calls pci_msi_get_domain()
> > >>>     calls dev_get_msi_domain(), gets a NULL domain.
> > >>>     calls arch_setup_msi_irq()
> > >>> All ok then.
> > >>
> > >> Yes, because you're sidestepping the issue. Any chance you could dig a
> > >> bit deeper? I'd really like to nail this one down (before we convert
> > >> your PCI driver to the right API... ;-).
> > > The problem appears to be that when the pci host driver enables msi
> > > it calls the following:
> > > 	msi->domain = irq_domain_add_linear(pcie->dev->of_node,
> > INT_PCI_MSI_NR,
> > > 					    &msi_domain_ops, &msi->chip);
> > > The last arg is documented as:
> > > * @host_data: Controller private data pointer
> > > In _irq_domain_add() this ptr is stored in struct irq_domain's host_data.
> > >
> > > However, msi_domain_alloc_irqs() expects host_data to be a ptr to a
> > > struct msi_domain_info.
> > >
> > > It seems that a number of other pci host drivers do the same, so I am
> > > surprised that no one else has seen this.
> > 
> > Can you please give this hack a go and let me know if that helps?
> Works for me!

Cool. I'll post a patch with your Reported-by/Tested-by later today.

Thanks a lot.

	M.
-- 
Jazz is not dead. It just smells funny.

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 239 bytes --]

Hi Marc,

> > > Can you please give this hack a go and let me know if that helps?
> > Works for me!
> 
> Cool. I'll post a patch with your Reported-by/Tested-by later today.

Please put me on CC as well.

Thanks,

   Wolfram


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH] PCI: pcie-rcar: Fix OF node passed to MSI irq domain

[Wolfram Sang]

[-- Attachment #1: Type: text/plain, Size: 239 bytes --]

Hi Marc,

> > > Can you please give this hack a go and let me know if that helps?
> > Works for me!
> 
> Cool. I'll post a patch with your Reported-by/Tested-by later today.

Please put me on CC as well.

Thanks,

   Wolfram


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]