From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH] input: st1232.c: Add devicetree attributes Date: Mon, 16 Nov 2015 09:40:44 -0600 Message-ID: <20151116154044.GA18208@rob-hp-laptop> References: <1447604447-8932-1-git-send-email-sander@vermin.nl> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1447604447-8932-1-git-send-email-sander@vermin.nl> Sender: linux-input-owner@vger.kernel.org To: Sander Vermin Cc: Dmitry Torokhov , linux-input@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree List-Id: devicetree@vger.kernel.org On Sun, Nov 15, 2015 at 05:20:47PM +0100, Sander Vermin wrote: > Add support for rotating and inverted axis for the Sitronix ST1232 touchscreen controller. > > For the rotation of the touchscreen the devicetree resolution propteries are requierd. For this purpose the following devicetree mappings are implemented: Fix the line wrap. > - touchscreen-size-x > - touchscreen-size-y > - touchscreen-inverted-x > - touchscreen-inverted-y > - touchscreen-swapped-x-y > > Signed-off-by: Sander Vermin > --- > .../bindings/input/touchscreen/sitronix-st1232.txt | 18 +- > drivers/input/touchscreen/st1232.c | 362 +++++++++++++++------ > 2 files changed, 272 insertions(+), 108 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt > index 64ad48b..1dcd1b6 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt > @@ -1,12 +1,18 @@ > * Sitronix st1232 touchscreen controller > > Required properties: > -- compatible: must be "sitronix,st1232" > -- reg: I2C address of the chip > -- interrupts: interrupt to which the chip is connected > +- compatible : must be "sitronix,st1232" > +- reg : I2C address of the chip > +- interrupts : interrupt to which the chip is connected > +- touchscreen-size-x : horizontal resolution of touchscreen (in pixels) > +- touchscreen-size-y : vertical resolution of touchscreen (in pixels) > + Reformatting in a separate patch please. > Optional properties: > -- gpios: a phandle to the reset GPIO > +- gpios : a phandle to the reset GPIO > +- touchscreen-inverted-x : X axis is inverted (boolean) > +- touchscreen-inverted-y : Y axis is inverted (boolean) > +- touchscreen-swapped-x-y : X and Y axis are swapped (boolean) > > Example: > > @@ -18,6 +24,10 @@ Example: > reg = <0x55>; > interrupts = <2 0>; > gpios = <&gpio1 166 0>; > + touchscreen-size-y = <800>; > + touchscreen-size-x = <480>; > + touchscreen-inverted-y; > + touchscreen-swapped-x-y; > }; > > /* ... */ > diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c > index e943678..0458a29 100644 > --- a/drivers/input/touchscreen/st1232.c > +++ b/drivers/input/touchscreen/st1232.c > @@ -1,6 +1,9 @@ > /* > * ST1232 Touchscreen Controller Driver > * > + * Copyright (C) 2015 Sander Vermin > + * Sander Vermin > + * > * Copyright (C) 2010 Renesas Solutions Corp. > * Tony SIM > * > @@ -22,6 +25,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -31,70 +35,89 @@ > #include > #include > > -#define ST1232_TS_NAME "st1232-ts" > +#define ST1232_REG_STATUS 0x01 > +#define ST1232_REG_CONTROL 0x02 > +#define ST1232_REG_XY_RES 0x04 > +#define ST1232_REG_TOUCHDATA 0x10 > + > +#define ST1232_POWER_DOWN 0x02 > > -#define MIN_X 0x00 > -#define MIN_Y 0x00 > -#define MAX_X 0x31f /* (800 - 1) */ > -#define MAX_Y 0x1df /* (480 - 1) */ > -#define MAX_AREA 0xff > -#define MAX_FINGERS 2 > +#define ST1232_MAX_FINGERS 2 > +#define ST1232_MAX_RESOLUTION 800 > +#define ST1232_TS_NAME "st1232-ts" > > struct st1232_ts_finger { > u16 x; > u16 y; > - u8 t; > + u8 z; > bool is_valid; > }; > > -struct st1232_ts_data { > +struct st1232_touch_data { > + __u8 softbutton; > + __u8 finger_count; > + struct st1232_ts_finger finger[ST1232_MAX_FINGERS]; > +}; > + > +struct st1232_data { > struct i2c_client *client; > struct input_dev *input_dev; > - struct st1232_ts_finger finger[MAX_FINGERS]; > struct dev_pm_qos_request low_latency_req; > int reset_gpio; > + u32 max_x; > + u32 max_y; > + bool invert_x; > + bool invert_y; > + bool swap_x_y; > }; > > -static int st1232_ts_read_data(struct st1232_ts_data *ts) > +static int st1232_ts_read_data(struct i2c_client *client, > + struct st1232_touch_data *touch_data) > { > - struct st1232_ts_finger *finger = ts->finger; > - struct i2c_client *client = ts->client; > - struct i2c_msg msg[2]; > int error; > - u8 start_reg; > + u8 start_reg = ST1232_REG_TOUCHDATA; > u8 buf[10]; > > - /* read touchscreen data from ST1232 */ > - msg[0].addr = client->addr; > - msg[0].flags = 0; > - msg[0].len = 1; > - msg[0].buf = &start_reg; > - start_reg = 0x10; > - > - msg[1].addr = ts->client->addr; > - msg[1].flags = I2C_M_RD; > - msg[1].len = sizeof(buf); > - msg[1].buf = buf; > + struct i2c_msg msg[2] = { > + { > + .addr = client->addr, > + .len = 1, > + .buf = &start_reg > + }, > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = sizeof(buf), > + .buf = (u8 *)buf > + } > + }; > > error = i2c_transfer(client->adapter, msg, 2); > if (error < 0) > return error; > > + /* get number of fingers */ > + touch_data->finger_count = buf[0] & 0x7; > + > + /* get softkeys */ > + touch_data->softbutton = buf[1]; > + > /* get "valid" bits */ > - finger[0].is_valid = buf[2] >> 7; > - finger[1].is_valid = buf[5] >> 7; > - > - /* get xy coordinate */ > - if (finger[0].is_valid) { > - finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3]; > - finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4]; > - finger[0].t = buf[8]; > + touch_data->finger[0].is_valid = buf[2] >> 7; > + touch_data->finger[1].is_valid = buf[5] >> 7; > + > + /* get coordinate finger 0 */ > + if (touch_data->finger[0].is_valid) { > + touch_data->finger[0].x = ((buf[2] & 0x70) << 4) | buf[3]; > + touch_data->finger[0].y = ((buf[2] & 0x07) << 8) | buf[4]; > + touch_data->finger[0].z = buf[8]; > } > > - if (finger[1].is_valid) { > - finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6]; > - finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7]; > - finger[1].t = buf[9]; > + /* get coordinate finger 1 */ > + if (touch_data->finger[1].is_valid) { > + touch_data->finger[1].x = ((buf[5] & 0x70) << 4) | buf[6]; > + touch_data->finger[1].y = ((buf[5] & 0x07) << 8) | buf[7]; > + touch_data->finger[1].z = buf[9]; > } > > return 0; > @@ -102,59 +125,155 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts) > > static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) > { > - struct st1232_ts_data *ts = dev_id; > - struct st1232_ts_finger *finger = ts->finger; > + struct st1232_data *ts = dev_id; > struct input_dev *input_dev = ts->input_dev; > - int count = 0; > + struct st1232_touch_data st_tdata; > int i, ret; > > - ret = st1232_ts_read_data(ts); > - if (ret < 0) > - goto end; > + ret = st1232_ts_read_data(ts->client, &st_tdata); > + if (ret < 0) { > + dev_err(dev_id, "Error reading touch data: %d\n", ret); > + return IRQ_HANDLED; > + } > + > + if (st_tdata.finger_count > ST1232_MAX_FINGERS) { > + dev_warn(dev_id, "Too many fingers %d > %d\n", > + st_tdata.finger_count, ST1232_MAX_FINGERS); > + st_tdata.finger_count = ST1232_MAX_FINGERS; > + } > > /* multi touch protocol */ > - for (i = 0; i < MAX_FINGERS; i++) { > - if (!finger[i].is_valid) > + for (i = 0; i < ST1232_MAX_FINGERS; i++) { > + input_mt_slot(input_dev, i); > + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, > + st_tdata.finger[i].is_valid); > + if (!st_tdata.finger[i].is_valid) > continue; > > - input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t); > - input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x); > - input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y); > - input_mt_sync(input_dev); > - count++; > - } > - > - /* SYN_MT_REPORT only if no contact */ > - if (!count) { > - input_mt_sync(input_dev); > - if (ts->low_latency_req.dev) { > - dev_pm_qos_remove_request(&ts->low_latency_req); > - ts->low_latency_req.dev = NULL; > + input_report_abs(input_dev, ABS_MT_PRESSURE, > + st_tdata.finger[i].z); > + > + if (ts->invert_x) > + st_tdata.finger[i].x = ts->max_x - st_tdata.finger[i].x; > + > + if (ts->invert_y) > + st_tdata.finger[i].y = ts->max_y - st_tdata.finger[i].y; > + > + if (!ts->swap_x_y) { > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_X, > + st_tdata.finger[i].x); > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_Y, > + st_tdata.finger[i].y); > + } else { > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_X, > + st_tdata.finger[i].y); > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_Y, > + st_tdata.finger[i].x); > } > - } else if (!ts->low_latency_req.dev) { > - /* First contact, request 100 us latency. */ > - dev_pm_qos_add_ancestor_request(&ts->client->dev, > - &ts->low_latency_req, > - DEV_PM_QOS_RESUME_LATENCY, 100); > } > > /* SYN_REPORT */ > + input_mt_sync_frame(input_dev); > input_sync(input_dev); > > -end: > return IRQ_HANDLED; > } > > -static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) > +static void st1232_ts_power(struct st1232_data *ts, bool poweron) > { > + /* only operates reset-pin */ > if (gpio_is_valid(ts->reset_gpio)) > gpio_direction_output(ts->reset_gpio, poweron); > } > > +static int st1232_start(struct input_dev *dev) > +{ > + struct st1232_data *data = input_get_drvdata(dev); > + struct st1232_touch_data touch_data; > + int error; > + int count; > + > + u8 start_reg = ST1232_REG_XY_RES; > + u8 buf[3]; > + /* set high nible of x and y resolution */ > + buf[0] = ((data->max_x >> 8) << 4) | (data->max_y >> 8); > + /* set low byte of x resolution */ > + buf[1] = data->max_x; > + /* set low byte of x resolution */ > + buf[2] = data->max_y; > + struct i2c_msg msg[2] = { > + { > + .addr = data->client->addr, > + .len = 1, > + .buf = &start_reg > + }, > + { > + .addr = data->client->addr, > + .flags = 0, > + .len = sizeof(buf), > + .buf = (u8 *)buf > + } > + }; > + > + /* set reset-pin high */ > + st1232_ts_power(data, true); > + > + /* read status register, check for erros */ > + count = 0; > + while (i2c_smbus_read_byte_data(data->client, ST1232_REG_STATUS) != 0) { > + /* wait for the device to come up */ > + msleep(20); > + count++; > + if (count > 10) { > + dev_err(&data->client->dev, "Device status Not OKE\n"); > + return -EINVAL; > + } > + } > + > + /* write 0 for defaults, disable powerdown */ > + i2c_smbus_write_byte_data(data->client, ST1232_REG_CONTROL, 0); > + > + /* write settings to controller */ > + error = i2c_transfer(data->client->adapter, msg, 2); > + if (error < 0) > + return error; > + > + /* read touch data to disgard possible interrupt */ > + error = st1232_ts_read_data(data->client, &touch_data); > + if (error < 0) > + return error; > + > + /* enable interrupt */ > + enable_irq(data->client->irq); > + > + dev_info(&data->client->dev, "Touchscreen device started\n"); > + > + return 0; > +} > + > +static void st1232_stop(struct input_dev *dev) > +{ > + struct st1232_data *data = input_get_drvdata(dev); > + > + /* disable interrupt */ > + disable_irq(data->client->irq); > + > + /* write powerdown to touchscreen */ > + i2c_smbus_write_byte_data(data->client, ST1232_REG_CONTROL, > + ST1232_POWER_DOWN); > + > + /* set reset-pin low */ > + st1232_ts_power(data, false); > + > + dev_info(&data->client->dev, "Touchscreen device stopped\n"); > +} > + > static int st1232_ts_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > - struct st1232_ts_data *ts; > + struct st1232_data *ts; > + struct device *dev = &client->dev; > + struct device_node *np = dev->of_node; > struct st1232_pdata *pdata = dev_get_platdata(&client->dev); > struct input_dev *input_dev; > int error; > @@ -177,8 +296,25 @@ static int st1232_ts_probe(struct i2c_client *client, > if (!input_dev) > return -ENOMEM; > > - ts->client = client; > - ts->input_dev = input_dev; > + if (of_property_read_u32(np, "touchscreen-size-x", &ts->max_x) || > + of_property_read_u32(np, "touchscreen-size-y", &ts->max_y)) { > + dev_err(&client->dev, > + "Error touchscreen-size-x and/or -y missing\n"); > + return -EINVAL; > + } > + > + if (ts->max_x > ST1232_MAX_RESOLUTION || > + ts->max_y > ST1232_MAX_RESOLUTION) { > + dev_err(&client->dev, > + "Error touchscreen-size-x and/or -y exceding maximum of %d\n", > + ST1232_MAX_RESOLUTION); > + return -EINVAL; > + } > + > + /* Optional device tree properties */ > + ts->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y"); > + ts->invert_x = of_property_read_bool(np, "touchscreen-inverted-x"); > + ts->invert_y = of_property_read_bool(np, "touchscreen-inverted-y"); > > if (pdata) > ts->reset_gpio = pdata->reset_gpio; > @@ -197,30 +333,46 @@ static int st1232_ts_probe(struct i2c_client *client, > } > } > > - st1232_ts_power(ts, true); > - > - input_dev->name = "st1232-touchscreen"; > + input_dev->name = client->name; > input_dev->id.bustype = BUS_I2C; > - input_dev->dev.parent = &client->dev; > + input_dev->open = st1232_start; > + input_dev->close = st1232_stop; > + input_dev->dev.parent = dev; > + > + if (!ts->swap_x_y) { > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, > + ts->max_x, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, > + ts->max_y, 0, 0); > + } else { > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, > + ts->max_y, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, > + ts->max_x, 0, 0); > + } > > - __set_bit(EV_SYN, input_dev->evbit); > - __set_bit(EV_KEY, input_dev->evbit); > - __set_bit(EV_ABS, input_dev->evbit); > + error = input_mt_init_slots(input_dev, ST1232_MAX_FINGERS, > + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); > + if (error) > + return error; > > - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); > - input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0); > - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0); > + ts->client = client; > + ts->input_dev = input_dev; > + input_set_drvdata(input_dev, ts); > > error = devm_request_threaded_irq(&client->dev, client->irq, > NULL, st1232_ts_irq_handler, > IRQF_ONESHOT, > client->name, ts); > if (error) { > - dev_err(&client->dev, "Failed to register interrupt\n"); > + dev_err(&client->dev, "Error requesting irq: %d\n", error); > return error; > } > > - error = input_register_device(ts->input_dev); > + /* Stop device till opened */ > + st1232_stop(ts->input_dev); > + > + error = input_register_device(input_dev); > if (error) { > dev_err(&client->dev, "Unable to register %s input device\n", > input_dev->name); > @@ -228,6 +380,8 @@ static int st1232_ts_probe(struct i2c_client *client, > } > > i2c_set_clientdata(client, ts); > + > + /* allow the device to wake */ > device_init_wakeup(&client->dev, 1); > > return 0; > @@ -235,43 +389,43 @@ static int st1232_ts_probe(struct i2c_client *client, > > static int st1232_ts_remove(struct i2c_client *client) > { > - struct st1232_ts_data *ts = i2c_get_clientdata(client); > + struct st1232_data *ts = i2c_get_clientdata(client); > > device_init_wakeup(&client->dev, 0); > + > + /* set reset-pin low */ > st1232_ts_power(ts, false); > > return 0; > } > > -static int __maybe_unused st1232_ts_suspend(struct device *dev) > +#ifdef CONFIG_PM_SLEEP > +static int st1232_ts_suspend(struct device *dev) > { > struct i2c_client *client = to_i2c_client(dev); > - struct st1232_ts_data *ts = i2c_get_clientdata(client); > + struct st1232_data *data = i2c_get_clientdata(client); > > - if (device_may_wakeup(&client->dev)) { > - enable_irq_wake(client->irq); > - } else { > - disable_irq(client->irq); > - st1232_ts_power(ts, false); > - } > + mutex_lock(&data->input_dev->mutex); > + if (data->input_dev->users) > + st1232_stop(data->input_dev); > + mutex_unlock(&data->input_dev->mutex); > > return 0; > } > > -static int __maybe_unused st1232_ts_resume(struct device *dev) > +static int st1232_ts_resume(struct device *dev) > { > struct i2c_client *client = to_i2c_client(dev); > - struct st1232_ts_data *ts = i2c_get_clientdata(client); > + struct st1232_data *data = i2c_get_clientdata(client); > > - if (device_may_wakeup(&client->dev)) { > - disable_irq_wake(client->irq); > - } else { > - st1232_ts_power(ts, true); > - enable_irq(client->irq); > - } > + mutex_lock(&data->input_dev->mutex); > + if (data->input_dev->users) > + st1232_start(data->input_dev); > + mutex_unlock(&data->input_dev->mutex); > > return 0; > } > +#endif > > static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops, > st1232_ts_suspend, st1232_ts_resume); > @@ -282,13 +436,12 @@ static const struct i2c_device_id st1232_ts_id[] = { > }; > MODULE_DEVICE_TABLE(i2c, st1232_ts_id); > > -#ifdef CONFIG_OF > -static const struct of_device_id st1232_ts_dt_ids[] = { > +static const struct of_device_id st1232_of_match[] = { > { .compatible = "sitronix,st1232", }, > { } > }; > -MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids); > -#endif > +MODULE_DEVICE_TABLE(of, st1232_of_match); > + > > static struct i2c_driver st1232_ts_driver = { > .probe = st1232_ts_probe, > @@ -296,13 +449,14 @@ static struct i2c_driver st1232_ts_driver = { > .id_table = st1232_ts_id, > .driver = { > .name = ST1232_TS_NAME, > - .of_match_table = of_match_ptr(st1232_ts_dt_ids), > + .owner = THIS_MODULE, > + .of_match_table = st1232_of_match, > .pm = &st1232_ts_pm_ops, > }, > }; > > module_i2c_driver(st1232_ts_driver); > > -MODULE_AUTHOR("Tony SIM "); > +MODULE_AUTHOR("Tony SIM , Sander Vermin "); > MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); > MODULE_LICENSE("GPL"); > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: robh@kernel.org (Rob Herring) Date: Mon, 16 Nov 2015 09:40:44 -0600 Subject: [PATCH] input: st1232.c: Add devicetree attributes In-Reply-To: <1447604447-8932-1-git-send-email-sander@vermin.nl> References: <1447604447-8932-1-git-send-email-sander@vermin.nl> Message-ID: <20151116154044.GA18208@rob-hp-laptop> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Sun, Nov 15, 2015 at 05:20:47PM +0100, Sander Vermin wrote: > Add support for rotating and inverted axis for the Sitronix ST1232 touchscreen controller. > > For the rotation of the touchscreen the devicetree resolution propteries are requierd. For this purpose the following devicetree mappings are implemented: Fix the line wrap. > - touchscreen-size-x > - touchscreen-size-y > - touchscreen-inverted-x > - touchscreen-inverted-y > - touchscreen-swapped-x-y > > Signed-off-by: Sander Vermin > --- > .../bindings/input/touchscreen/sitronix-st1232.txt | 18 +- > drivers/input/touchscreen/st1232.c | 362 +++++++++++++++------ > 2 files changed, 272 insertions(+), 108 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt > index 64ad48b..1dcd1b6 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/sitronix-st1232.txt > @@ -1,12 +1,18 @@ > * Sitronix st1232 touchscreen controller > > Required properties: > -- compatible: must be "sitronix,st1232" > -- reg: I2C address of the chip > -- interrupts: interrupt to which the chip is connected > +- compatible : must be "sitronix,st1232" > +- reg : I2C address of the chip > +- interrupts : interrupt to which the chip is connected > +- touchscreen-size-x : horizontal resolution of touchscreen (in pixels) > +- touchscreen-size-y : vertical resolution of touchscreen (in pixels) > + Reformatting in a separate patch please. > Optional properties: > -- gpios: a phandle to the reset GPIO > +- gpios : a phandle to the reset GPIO > +- touchscreen-inverted-x : X axis is inverted (boolean) > +- touchscreen-inverted-y : Y axis is inverted (boolean) > +- touchscreen-swapped-x-y : X and Y axis are swapped (boolean) > > Example: > > @@ -18,6 +24,10 @@ Example: > reg = <0x55>; > interrupts = <2 0>; > gpios = <&gpio1 166 0>; > + touchscreen-size-y = <800>; > + touchscreen-size-x = <480>; > + touchscreen-inverted-y; > + touchscreen-swapped-x-y; > }; > > /* ... */ > diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c > index e943678..0458a29 100644 > --- a/drivers/input/touchscreen/st1232.c > +++ b/drivers/input/touchscreen/st1232.c > @@ -1,6 +1,9 @@ > /* > * ST1232 Touchscreen Controller Driver > * > + * Copyright (C) 2015 Sander Vermin > + * Sander Vermin > + * > * Copyright (C) 2010 Renesas Solutions Corp. > * Tony SIM > * > @@ -22,6 +25,7 @@ > #include > #include > #include > +#include > #include > #include > #include > @@ -31,70 +35,89 @@ > #include > #include > > -#define ST1232_TS_NAME "st1232-ts" > +#define ST1232_REG_STATUS 0x01 > +#define ST1232_REG_CONTROL 0x02 > +#define ST1232_REG_XY_RES 0x04 > +#define ST1232_REG_TOUCHDATA 0x10 > + > +#define ST1232_POWER_DOWN 0x02 > > -#define MIN_X 0x00 > -#define MIN_Y 0x00 > -#define MAX_X 0x31f /* (800 - 1) */ > -#define MAX_Y 0x1df /* (480 - 1) */ > -#define MAX_AREA 0xff > -#define MAX_FINGERS 2 > +#define ST1232_MAX_FINGERS 2 > +#define ST1232_MAX_RESOLUTION 800 > +#define ST1232_TS_NAME "st1232-ts" > > struct st1232_ts_finger { > u16 x; > u16 y; > - u8 t; > + u8 z; > bool is_valid; > }; > > -struct st1232_ts_data { > +struct st1232_touch_data { > + __u8 softbutton; > + __u8 finger_count; > + struct st1232_ts_finger finger[ST1232_MAX_FINGERS]; > +}; > + > +struct st1232_data { > struct i2c_client *client; > struct input_dev *input_dev; > - struct st1232_ts_finger finger[MAX_FINGERS]; > struct dev_pm_qos_request low_latency_req; > int reset_gpio; > + u32 max_x; > + u32 max_y; > + bool invert_x; > + bool invert_y; > + bool swap_x_y; > }; > > -static int st1232_ts_read_data(struct st1232_ts_data *ts) > +static int st1232_ts_read_data(struct i2c_client *client, > + struct st1232_touch_data *touch_data) > { > - struct st1232_ts_finger *finger = ts->finger; > - struct i2c_client *client = ts->client; > - struct i2c_msg msg[2]; > int error; > - u8 start_reg; > + u8 start_reg = ST1232_REG_TOUCHDATA; > u8 buf[10]; > > - /* read touchscreen data from ST1232 */ > - msg[0].addr = client->addr; > - msg[0].flags = 0; > - msg[0].len = 1; > - msg[0].buf = &start_reg; > - start_reg = 0x10; > - > - msg[1].addr = ts->client->addr; > - msg[1].flags = I2C_M_RD; > - msg[1].len = sizeof(buf); > - msg[1].buf = buf; > + struct i2c_msg msg[2] = { > + { > + .addr = client->addr, > + .len = 1, > + .buf = &start_reg > + }, > + { > + .addr = client->addr, > + .flags = I2C_M_RD, > + .len = sizeof(buf), > + .buf = (u8 *)buf > + } > + }; > > error = i2c_transfer(client->adapter, msg, 2); > if (error < 0) > return error; > > + /* get number of fingers */ > + touch_data->finger_count = buf[0] & 0x7; > + > + /* get softkeys */ > + touch_data->softbutton = buf[1]; > + > /* get "valid" bits */ > - finger[0].is_valid = buf[2] >> 7; > - finger[1].is_valid = buf[5] >> 7; > - > - /* get xy coordinate */ > - if (finger[0].is_valid) { > - finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3]; > - finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4]; > - finger[0].t = buf[8]; > + touch_data->finger[0].is_valid = buf[2] >> 7; > + touch_data->finger[1].is_valid = buf[5] >> 7; > + > + /* get coordinate finger 0 */ > + if (touch_data->finger[0].is_valid) { > + touch_data->finger[0].x = ((buf[2] & 0x70) << 4) | buf[3]; > + touch_data->finger[0].y = ((buf[2] & 0x07) << 8) | buf[4]; > + touch_data->finger[0].z = buf[8]; > } > > - if (finger[1].is_valid) { > - finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6]; > - finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7]; > - finger[1].t = buf[9]; > + /* get coordinate finger 1 */ > + if (touch_data->finger[1].is_valid) { > + touch_data->finger[1].x = ((buf[5] & 0x70) << 4) | buf[6]; > + touch_data->finger[1].y = ((buf[5] & 0x07) << 8) | buf[7]; > + touch_data->finger[1].z = buf[9]; > } > > return 0; > @@ -102,59 +125,155 @@ static int st1232_ts_read_data(struct st1232_ts_data *ts) > > static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id) > { > - struct st1232_ts_data *ts = dev_id; > - struct st1232_ts_finger *finger = ts->finger; > + struct st1232_data *ts = dev_id; > struct input_dev *input_dev = ts->input_dev; > - int count = 0; > + struct st1232_touch_data st_tdata; > int i, ret; > > - ret = st1232_ts_read_data(ts); > - if (ret < 0) > - goto end; > + ret = st1232_ts_read_data(ts->client, &st_tdata); > + if (ret < 0) { > + dev_err(dev_id, "Error reading touch data: %d\n", ret); > + return IRQ_HANDLED; > + } > + > + if (st_tdata.finger_count > ST1232_MAX_FINGERS) { > + dev_warn(dev_id, "Too many fingers %d > %d\n", > + st_tdata.finger_count, ST1232_MAX_FINGERS); > + st_tdata.finger_count = ST1232_MAX_FINGERS; > + } > > /* multi touch protocol */ > - for (i = 0; i < MAX_FINGERS; i++) { > - if (!finger[i].is_valid) > + for (i = 0; i < ST1232_MAX_FINGERS; i++) { > + input_mt_slot(input_dev, i); > + input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, > + st_tdata.finger[i].is_valid); > + if (!st_tdata.finger[i].is_valid) > continue; > > - input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t); > - input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x); > - input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y); > - input_mt_sync(input_dev); > - count++; > - } > - > - /* SYN_MT_REPORT only if no contact */ > - if (!count) { > - input_mt_sync(input_dev); > - if (ts->low_latency_req.dev) { > - dev_pm_qos_remove_request(&ts->low_latency_req); > - ts->low_latency_req.dev = NULL; > + input_report_abs(input_dev, ABS_MT_PRESSURE, > + st_tdata.finger[i].z); > + > + if (ts->invert_x) > + st_tdata.finger[i].x = ts->max_x - st_tdata.finger[i].x; > + > + if (ts->invert_y) > + st_tdata.finger[i].y = ts->max_y - st_tdata.finger[i].y; > + > + if (!ts->swap_x_y) { > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_X, > + st_tdata.finger[i].x); > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_Y, > + st_tdata.finger[i].y); > + } else { > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_X, > + st_tdata.finger[i].y); > + input_event(input_dev, EV_ABS, ABS_MT_POSITION_Y, > + st_tdata.finger[i].x); > } > - } else if (!ts->low_latency_req.dev) { > - /* First contact, request 100 us latency. */ > - dev_pm_qos_add_ancestor_request(&ts->client->dev, > - &ts->low_latency_req, > - DEV_PM_QOS_RESUME_LATENCY, 100); > } > > /* SYN_REPORT */ > + input_mt_sync_frame(input_dev); > input_sync(input_dev); > > -end: > return IRQ_HANDLED; > } > > -static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron) > +static void st1232_ts_power(struct st1232_data *ts, bool poweron) > { > + /* only operates reset-pin */ > if (gpio_is_valid(ts->reset_gpio)) > gpio_direction_output(ts->reset_gpio, poweron); > } > > +static int st1232_start(struct input_dev *dev) > +{ > + struct st1232_data *data = input_get_drvdata(dev); > + struct st1232_touch_data touch_data; > + int error; > + int count; > + > + u8 start_reg = ST1232_REG_XY_RES; > + u8 buf[3]; > + /* set high nible of x and y resolution */ > + buf[0] = ((data->max_x >> 8) << 4) | (data->max_y >> 8); > + /* set low byte of x resolution */ > + buf[1] = data->max_x; > + /* set low byte of x resolution */ > + buf[2] = data->max_y; > + struct i2c_msg msg[2] = { > + { > + .addr = data->client->addr, > + .len = 1, > + .buf = &start_reg > + }, > + { > + .addr = data->client->addr, > + .flags = 0, > + .len = sizeof(buf), > + .buf = (u8 *)buf > + } > + }; > + > + /* set reset-pin high */ > + st1232_ts_power(data, true); > + > + /* read status register, check for erros */ > + count = 0; > + while (i2c_smbus_read_byte_data(data->client, ST1232_REG_STATUS) != 0) { > + /* wait for the device to come up */ > + msleep(20); > + count++; > + if (count > 10) { > + dev_err(&data->client->dev, "Device status Not OKE\n"); > + return -EINVAL; > + } > + } > + > + /* write 0 for defaults, disable powerdown */ > + i2c_smbus_write_byte_data(data->client, ST1232_REG_CONTROL, 0); > + > + /* write settings to controller */ > + error = i2c_transfer(data->client->adapter, msg, 2); > + if (error < 0) > + return error; > + > + /* read touch data to disgard possible interrupt */ > + error = st1232_ts_read_data(data->client, &touch_data); > + if (error < 0) > + return error; > + > + /* enable interrupt */ > + enable_irq(data->client->irq); > + > + dev_info(&data->client->dev, "Touchscreen device started\n"); > + > + return 0; > +} > + > +static void st1232_stop(struct input_dev *dev) > +{ > + struct st1232_data *data = input_get_drvdata(dev); > + > + /* disable interrupt */ > + disable_irq(data->client->irq); > + > + /* write powerdown to touchscreen */ > + i2c_smbus_write_byte_data(data->client, ST1232_REG_CONTROL, > + ST1232_POWER_DOWN); > + > + /* set reset-pin low */ > + st1232_ts_power(data, false); > + > + dev_info(&data->client->dev, "Touchscreen device stopped\n"); > +} > + > static int st1232_ts_probe(struct i2c_client *client, > const struct i2c_device_id *id) > { > - struct st1232_ts_data *ts; > + struct st1232_data *ts; > + struct device *dev = &client->dev; > + struct device_node *np = dev->of_node; > struct st1232_pdata *pdata = dev_get_platdata(&client->dev); > struct input_dev *input_dev; > int error; > @@ -177,8 +296,25 @@ static int st1232_ts_probe(struct i2c_client *client, > if (!input_dev) > return -ENOMEM; > > - ts->client = client; > - ts->input_dev = input_dev; > + if (of_property_read_u32(np, "touchscreen-size-x", &ts->max_x) || > + of_property_read_u32(np, "touchscreen-size-y", &ts->max_y)) { > + dev_err(&client->dev, > + "Error touchscreen-size-x and/or -y missing\n"); > + return -EINVAL; > + } > + > + if (ts->max_x > ST1232_MAX_RESOLUTION || > + ts->max_y > ST1232_MAX_RESOLUTION) { > + dev_err(&client->dev, > + "Error touchscreen-size-x and/or -y exceding maximum of %d\n", > + ST1232_MAX_RESOLUTION); > + return -EINVAL; > + } > + > + /* Optional device tree properties */ > + ts->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y"); > + ts->invert_x = of_property_read_bool(np, "touchscreen-inverted-x"); > + ts->invert_y = of_property_read_bool(np, "touchscreen-inverted-y"); > > if (pdata) > ts->reset_gpio = pdata->reset_gpio; > @@ -197,30 +333,46 @@ static int st1232_ts_probe(struct i2c_client *client, > } > } > > - st1232_ts_power(ts, true); > - > - input_dev->name = "st1232-touchscreen"; > + input_dev->name = client->name; > input_dev->id.bustype = BUS_I2C; > - input_dev->dev.parent = &client->dev; > + input_dev->open = st1232_start; > + input_dev->close = st1232_stop; > + input_dev->dev.parent = dev; > + > + if (!ts->swap_x_y) { > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, > + ts->max_x, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, > + ts->max_y, 0, 0); > + } else { > + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, > + ts->max_y, 0, 0); > + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, > + ts->max_x, 0, 0); > + } > > - __set_bit(EV_SYN, input_dev->evbit); > - __set_bit(EV_KEY, input_dev->evbit); > - __set_bit(EV_ABS, input_dev->evbit); > + error = input_mt_init_slots(input_dev, ST1232_MAX_FINGERS, > + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); > + if (error) > + return error; > > - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0); > - input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0); > - input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0); > + ts->client = client; > + ts->input_dev = input_dev; > + input_set_drvdata(input_dev, ts); > > error = devm_request_threaded_irq(&client->dev, client->irq, > NULL, st1232_ts_irq_handler, > IRQF_ONESHOT, > client->name, ts); > if (error) { > - dev_err(&client->dev, "Failed to register interrupt\n"); > + dev_err(&client->dev, "Error requesting irq: %d\n", error); > return error; > } > > - error = input_register_device(ts->input_dev); > + /* Stop device till opened */ > + st1232_stop(ts->input_dev); > + > + error = input_register_device(input_dev); > if (error) { > dev_err(&client->dev, "Unable to register %s input device\n", > input_dev->name); > @@ -228,6 +380,8 @@ static int st1232_ts_probe(struct i2c_client *client, > } > > i2c_set_clientdata(client, ts); > + > + /* allow the device to wake */ > device_init_wakeup(&client->dev, 1); > > return 0; > @@ -235,43 +389,43 @@ static int st1232_ts_probe(struct i2c_client *client, > > static int st1232_ts_remove(struct i2c_client *client) > { > - struct st1232_ts_data *ts = i2c_get_clientdata(client); > + struct st1232_data *ts = i2c_get_clientdata(client); > > device_init_wakeup(&client->dev, 0); > + > + /* set reset-pin low */ > st1232_ts_power(ts, false); > > return 0; > } > > -static int __maybe_unused st1232_ts_suspend(struct device *dev) > +#ifdef CONFIG_PM_SLEEP > +static int st1232_ts_suspend(struct device *dev) > { > struct i2c_client *client = to_i2c_client(dev); > - struct st1232_ts_data *ts = i2c_get_clientdata(client); > + struct st1232_data *data = i2c_get_clientdata(client); > > - if (device_may_wakeup(&client->dev)) { > - enable_irq_wake(client->irq); > - } else { > - disable_irq(client->irq); > - st1232_ts_power(ts, false); > - } > + mutex_lock(&data->input_dev->mutex); > + if (data->input_dev->users) > + st1232_stop(data->input_dev); > + mutex_unlock(&data->input_dev->mutex); > > return 0; > } > > -static int __maybe_unused st1232_ts_resume(struct device *dev) > +static int st1232_ts_resume(struct device *dev) > { > struct i2c_client *client = to_i2c_client(dev); > - struct st1232_ts_data *ts = i2c_get_clientdata(client); > + struct st1232_data *data = i2c_get_clientdata(client); > > - if (device_may_wakeup(&client->dev)) { > - disable_irq_wake(client->irq); > - } else { > - st1232_ts_power(ts, true); > - enable_irq(client->irq); > - } > + mutex_lock(&data->input_dev->mutex); > + if (data->input_dev->users) > + st1232_start(data->input_dev); > + mutex_unlock(&data->input_dev->mutex); > > return 0; > } > +#endif > > static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops, > st1232_ts_suspend, st1232_ts_resume); > @@ -282,13 +436,12 @@ static const struct i2c_device_id st1232_ts_id[] = { > }; > MODULE_DEVICE_TABLE(i2c, st1232_ts_id); > > -#ifdef CONFIG_OF > -static const struct of_device_id st1232_ts_dt_ids[] = { > +static const struct of_device_id st1232_of_match[] = { > { .compatible = "sitronix,st1232", }, > { } > }; > -MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids); > -#endif > +MODULE_DEVICE_TABLE(of, st1232_of_match); > + > > static struct i2c_driver st1232_ts_driver = { > .probe = st1232_ts_probe, > @@ -296,13 +449,14 @@ static struct i2c_driver st1232_ts_driver = { > .id_table = st1232_ts_id, > .driver = { > .name = ST1232_TS_NAME, > - .of_match_table = of_match_ptr(st1232_ts_dt_ids), > + .owner = THIS_MODULE, > + .of_match_table = st1232_of_match, > .pm = &st1232_ts_pm_ops, > }, > }; > > module_i2c_driver(st1232_ts_driver); > > -MODULE_AUTHOR("Tony SIM "); > +MODULE_AUTHOR("Tony SIM , Sander Vermin "); > MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); > MODULE_LICENSE("GPL"); > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo at vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html