From: Rob Herring <robh@kernel.org>
To: Matthew McClintock <mmcclint@qca.qualcomm.com>
Cc: Andy Gross <agross@codeaurora.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org,
Varadarajan Narayanan <varada@codeaurora.org>,
linux-kernel@vger.kernel.org,
qca-upstream.external@qca.qualcomm.com,
Sricharan R <sricharan@codeaurora.org>,
Mathieu Olivari <mathieu@codeaurora.org>,
Matthew McClintock <mmcclint@codeaurora.org>
Subject: Re: [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support
Date: Fri, 20 Nov 2015 10:35:08 -0600 [thread overview]
Message-ID: <20151120163508.GA6680@rob-hp-laptop> (raw)
In-Reply-To: <1447975173-29485-2-git-send-email-mmcclint@qca.qualcomm.com>
On Thu, Nov 19, 2015 at 05:19:28PM -0600, Matthew McClintock wrote:
> From: Varadarajan Narayanan <varada@codeaurora.org>
>
> Add pinctrl driver support for IPQ4019 platform
>
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
> Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
> Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
> ---
>
> v3
> - update example with actual values from dts
> - add missing pins 71-99
> - drop many functions and stick to basic functionality
>
> v2
> - add a note in the device tree binding about the TLMM block
>
> .../bindings/pinctrl/qcom,ipq4019-pinctrl.txt | 74 ++++
Acked-by: Rob Herring <robh@kernel.org>
> drivers/pinctrl/qcom/Kconfig | 8 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-ipq4019.c | 454 +++++++++++++++++++++
> 4 files changed, 537 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
> create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq4019.c
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
> new file mode 100644
> index 0000000..cfb8500
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq4019-pinctrl.txt
> @@ -0,0 +1,74 @@
> +Qualcomm Atheros IPQ4019 TLMM block
> +
> +This is the Top Level Mode Multiplexor block found on the Qualcomm IPQ8019
> +platform, it provides pinctrl, pinmux, pinconf, and gpiolib facilities.
> +
> +Required properties:
> +- compatible: "qcom,ipq4019-pinctrl"
> +- reg: Should be the base address and length of the TLMM block.
> +- interrupts: Should be the parent IRQ of the TLMM block.
> +- interrupt-controller: Marks the device node as an interrupt controller.
> +- #interrupt-cells: Should be two.
> +- gpio-controller: Marks the device node as a GPIO controller.
> +- #gpio-cells : Should be two.
> + The first cell is the gpio pin number and the
> + second cell is used for optional parameters.
> +
> +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
> +a general description of GPIO and interrupt bindings.
> +
> +Please refer to pinctrl-bindings.txt in this directory for details of the
> +common pinctrl bindings used by client devices, including the meaning of the
> +phrase "pin configuration node".
> +
> +The pin configuration nodes act as a container for an abitrary number of
> +subnodes. Each of these subnodes represents some desired configuration for a
> +pin, a group, or a list of pins or groups. This configuration can include the
> +mux function to select on those pin(s)/group(s), and various pin configuration
> +parameters, such as pull-up, drive strength, etc.
> +
> +The name of each subnode is not important; all subnodes should be enumerated
> +and processed purely based on their content.
> +
> +Each subnode only affects those parameters that are explicitly listed. In
> +other words, a subnode that lists a mux function but no pin configuration
> +parameters implies no information about any pin configuration parameters.
> +Similarly, a pin subnode that describes a pullup parameter implies no
> +information about e.g. the mux function.
> +
> +
> +The following generic properties as defined in pinctrl-bindings.txt are valid
> +to specify in a pin configuration subnode:
> + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength.
> +
> +Non-empty subnodes must specify the 'pins' property.
> +Note that not all properties are valid for all pins.
> +
> +
> +Valid values for qcom,pins are:
> + gpio0-gpio99
> + Supports mux, bias and drive-strength
> +
> +Valid values for qcom,function are:
> +gpio, blsp_uart1, blsp_i2c0, blsp_i2c1, blsp_uart0, blsp_spi1, blsp_spi0
> +
> +Example:
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq4019-pinctrl";
> + reg = <0x1000000 0x300000>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 208 0>;
> +
> + serial_pins: serial_pinmux {
> + mux {
> + pins = "gpio60", "gpio61";
> + function = "blsp_uart0";
> + bias-disable;
> + };
> + };
> + };
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 383263a..6b898ef 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -23,6 +23,14 @@ config PINCTRL_APQ8084
> This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> Qualcomm TLMM block found in the Qualcomm APQ8084 platform.
>
> +config PINCTRL_IPQ4019
> + tristate "Qualcomm IPQ4019 pin controller driver"
> + depends on GPIOLIB && OF
> + select PINCTRL_MSM
> + help
> + This is the pinctrl, pinmux, pinconf and gpiolib driver for the
> + Qualcomm TLMM block found in the Qualcomm IPQ4019 platform.
> +
> config PINCTRL_IPQ8064
> tristate "Qualcomm IPQ8064 pin controller driver"
> depends on GPIOLIB && OF
> diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
> index 13b190e..fb9a991 100644
> --- a/drivers/pinctrl/qcom/Makefile
> +++ b/drivers/pinctrl/qcom/Makefile
> @@ -2,6 +2,7 @@
> obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
> obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
> obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o
> +obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o
> obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
> obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o
> obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
> diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> new file mode 100644
> index 0000000..122bfab
> --- /dev/null
> +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
> @@ -0,0 +1,454 @@
> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +
> +#include "pinctrl-msm.h"
> +
> +static const struct pinctrl_pin_desc ipq4019_pins[] = {
> + PINCTRL_PIN(0, "GPIO_0"),
> + PINCTRL_PIN(1, "GPIO_1"),
> + PINCTRL_PIN(2, "GPIO_2"),
> + PINCTRL_PIN(3, "GPIO_3"),
> + PINCTRL_PIN(4, "GPIO_4"),
> + PINCTRL_PIN(5, "GPIO_5"),
> + PINCTRL_PIN(6, "GPIO_6"),
> + PINCTRL_PIN(7, "GPIO_7"),
> + PINCTRL_PIN(8, "GPIO_8"),
> + PINCTRL_PIN(9, "GPIO_9"),
> + PINCTRL_PIN(10, "GPIO_10"),
> + PINCTRL_PIN(11, "GPIO_11"),
> + PINCTRL_PIN(12, "GPIO_12"),
> + PINCTRL_PIN(13, "GPIO_13"),
> + PINCTRL_PIN(14, "GPIO_14"),
> + PINCTRL_PIN(15, "GPIO_15"),
> + PINCTRL_PIN(16, "GPIO_16"),
> + PINCTRL_PIN(17, "GPIO_17"),
> + PINCTRL_PIN(18, "GPIO_18"),
> + PINCTRL_PIN(19, "GPIO_19"),
> + PINCTRL_PIN(20, "GPIO_20"),
> + PINCTRL_PIN(21, "GPIO_21"),
> + PINCTRL_PIN(22, "GPIO_22"),
> + PINCTRL_PIN(23, "GPIO_23"),
> + PINCTRL_PIN(24, "GPIO_24"),
> + PINCTRL_PIN(25, "GPIO_25"),
> + PINCTRL_PIN(26, "GPIO_26"),
> + PINCTRL_PIN(27, "GPIO_27"),
> + PINCTRL_PIN(28, "GPIO_28"),
> + PINCTRL_PIN(29, "GPIO_29"),
> + PINCTRL_PIN(30, "GPIO_30"),
> + PINCTRL_PIN(31, "GPIO_31"),
> + PINCTRL_PIN(32, "GPIO_32"),
> + PINCTRL_PIN(33, "GPIO_33"),
> + PINCTRL_PIN(34, "GPIO_34"),
> + PINCTRL_PIN(35, "GPIO_35"),
> + PINCTRL_PIN(36, "GPIO_36"),
> + PINCTRL_PIN(37, "GPIO_37"),
> + PINCTRL_PIN(38, "GPIO_38"),
> + PINCTRL_PIN(39, "GPIO_39"),
> + PINCTRL_PIN(40, "GPIO_40"),
> + PINCTRL_PIN(41, "GPIO_41"),
> + PINCTRL_PIN(42, "GPIO_42"),
> + PINCTRL_PIN(43, "GPIO_43"),
> + PINCTRL_PIN(44, "GPIO_44"),
> + PINCTRL_PIN(45, "GPIO_45"),
> + PINCTRL_PIN(46, "GPIO_46"),
> + PINCTRL_PIN(47, "GPIO_47"),
> + PINCTRL_PIN(48, "GPIO_48"),
> + PINCTRL_PIN(49, "GPIO_49"),
> + PINCTRL_PIN(50, "GPIO_50"),
> + PINCTRL_PIN(51, "GPIO_51"),
> + PINCTRL_PIN(52, "GPIO_52"),
> + PINCTRL_PIN(53, "GPIO_53"),
> + PINCTRL_PIN(54, "GPIO_54"),
> + PINCTRL_PIN(55, "GPIO_55"),
> + PINCTRL_PIN(56, "GPIO_56"),
> + PINCTRL_PIN(57, "GPIO_57"),
> + PINCTRL_PIN(58, "GPIO_58"),
> + PINCTRL_PIN(59, "GPIO_59"),
> + PINCTRL_PIN(60, "GPIO_60"),
> + PINCTRL_PIN(61, "GPIO_61"),
> + PINCTRL_PIN(62, "GPIO_62"),
> + PINCTRL_PIN(63, "GPIO_63"),
> + PINCTRL_PIN(64, "GPIO_64"),
> + PINCTRL_PIN(65, "GPIO_65"),
> + PINCTRL_PIN(66, "GPIO_66"),
> + PINCTRL_PIN(67, "GPIO_67"),
> + PINCTRL_PIN(68, "GPIO_68"),
> + PINCTRL_PIN(69, "GPIO_69"),
> + PINCTRL_PIN(70, "GPIO_70"),
> + PINCTRL_PIN(71, "GPIO_71"),
> + PINCTRL_PIN(72, "GPIO_72"),
> + PINCTRL_PIN(73, "GPIO_73"),
> + PINCTRL_PIN(74, "GPIO_74"),
> + PINCTRL_PIN(75, "GPIO_75"),
> + PINCTRL_PIN(76, "GPIO_76"),
> + PINCTRL_PIN(77, "GPIO_77"),
> + PINCTRL_PIN(78, "GPIO_78"),
> + PINCTRL_PIN(79, "GPIO_79"),
> + PINCTRL_PIN(80, "GPIO_80"),
> + PINCTRL_PIN(81, "GPIO_81"),
> + PINCTRL_PIN(82, "GPIO_82"),
> + PINCTRL_PIN(83, "GPIO_83"),
> + PINCTRL_PIN(84, "GPIO_84"),
> + PINCTRL_PIN(85, "GPIO_85"),
> + PINCTRL_PIN(86, "GPIO_86"),
> + PINCTRL_PIN(87, "GPIO_87"),
> + PINCTRL_PIN(88, "GPIO_88"),
> + PINCTRL_PIN(89, "GPIO_89"),
> + PINCTRL_PIN(90, "GPIO_90"),
> + PINCTRL_PIN(91, "GPIO_91"),
> + PINCTRL_PIN(92, "GPIO_92"),
> + PINCTRL_PIN(93, "GPIO_93"),
> + PINCTRL_PIN(94, "GPIO_94"),
> + PINCTRL_PIN(95, "GPIO_95"),
> + PINCTRL_PIN(96, "GPIO_96"),
> + PINCTRL_PIN(97, "GPIO_97"),
> + PINCTRL_PIN(98, "GPIO_98"),
> + PINCTRL_PIN(99, "GPIO_99"),
> +};
> +
> +#define DECLARE_QCA_GPIO_PINS(pin) \
> + static const unsigned int gpio##pin##_pins[] = { pin }
> +DECLARE_QCA_GPIO_PINS(0);
> +DECLARE_QCA_GPIO_PINS(1);
> +DECLARE_QCA_GPIO_PINS(2);
> +DECLARE_QCA_GPIO_PINS(3);
> +DECLARE_QCA_GPIO_PINS(4);
> +DECLARE_QCA_GPIO_PINS(5);
> +DECLARE_QCA_GPIO_PINS(6);
> +DECLARE_QCA_GPIO_PINS(7);
> +DECLARE_QCA_GPIO_PINS(8);
> +DECLARE_QCA_GPIO_PINS(9);
> +DECLARE_QCA_GPIO_PINS(10);
> +DECLARE_QCA_GPIO_PINS(11);
> +DECLARE_QCA_GPIO_PINS(12);
> +DECLARE_QCA_GPIO_PINS(13);
> +DECLARE_QCA_GPIO_PINS(14);
> +DECLARE_QCA_GPIO_PINS(15);
> +DECLARE_QCA_GPIO_PINS(16);
> +DECLARE_QCA_GPIO_PINS(17);
> +DECLARE_QCA_GPIO_PINS(18);
> +DECLARE_QCA_GPIO_PINS(19);
> +DECLARE_QCA_GPIO_PINS(20);
> +DECLARE_QCA_GPIO_PINS(21);
> +DECLARE_QCA_GPIO_PINS(22);
> +DECLARE_QCA_GPIO_PINS(23);
> +DECLARE_QCA_GPIO_PINS(24);
> +DECLARE_QCA_GPIO_PINS(25);
> +DECLARE_QCA_GPIO_PINS(26);
> +DECLARE_QCA_GPIO_PINS(27);
> +DECLARE_QCA_GPIO_PINS(28);
> +DECLARE_QCA_GPIO_PINS(29);
> +DECLARE_QCA_GPIO_PINS(30);
> +DECLARE_QCA_GPIO_PINS(31);
> +DECLARE_QCA_GPIO_PINS(32);
> +DECLARE_QCA_GPIO_PINS(33);
> +DECLARE_QCA_GPIO_PINS(34);
> +DECLARE_QCA_GPIO_PINS(35);
> +DECLARE_QCA_GPIO_PINS(36);
> +DECLARE_QCA_GPIO_PINS(37);
> +DECLARE_QCA_GPIO_PINS(38);
> +DECLARE_QCA_GPIO_PINS(39);
> +DECLARE_QCA_GPIO_PINS(40);
> +DECLARE_QCA_GPIO_PINS(41);
> +DECLARE_QCA_GPIO_PINS(42);
> +DECLARE_QCA_GPIO_PINS(43);
> +DECLARE_QCA_GPIO_PINS(44);
> +DECLARE_QCA_GPIO_PINS(45);
> +DECLARE_QCA_GPIO_PINS(46);
> +DECLARE_QCA_GPIO_PINS(47);
> +DECLARE_QCA_GPIO_PINS(48);
> +DECLARE_QCA_GPIO_PINS(49);
> +DECLARE_QCA_GPIO_PINS(50);
> +DECLARE_QCA_GPIO_PINS(51);
> +DECLARE_QCA_GPIO_PINS(52);
> +DECLARE_QCA_GPIO_PINS(53);
> +DECLARE_QCA_GPIO_PINS(54);
> +DECLARE_QCA_GPIO_PINS(55);
> +DECLARE_QCA_GPIO_PINS(56);
> +DECLARE_QCA_GPIO_PINS(57);
> +DECLARE_QCA_GPIO_PINS(58);
> +DECLARE_QCA_GPIO_PINS(59);
> +DECLARE_QCA_GPIO_PINS(60);
> +DECLARE_QCA_GPIO_PINS(61);
> +DECLARE_QCA_GPIO_PINS(62);
> +DECLARE_QCA_GPIO_PINS(63);
> +DECLARE_QCA_GPIO_PINS(64);
> +DECLARE_QCA_GPIO_PINS(65);
> +DECLARE_QCA_GPIO_PINS(66);
> +DECLARE_QCA_GPIO_PINS(67);
> +DECLARE_QCA_GPIO_PINS(68);
> +DECLARE_QCA_GPIO_PINS(69);
> +DECLARE_QCA_GPIO_PINS(70);
> +DECLARE_QCA_GPIO_PINS(71);
> +DECLARE_QCA_GPIO_PINS(72);
> +DECLARE_QCA_GPIO_PINS(73);
> +DECLARE_QCA_GPIO_PINS(74);
> +DECLARE_QCA_GPIO_PINS(75);
> +DECLARE_QCA_GPIO_PINS(76);
> +DECLARE_QCA_GPIO_PINS(77);
> +DECLARE_QCA_GPIO_PINS(78);
> +DECLARE_QCA_GPIO_PINS(79);
> +DECLARE_QCA_GPIO_PINS(80);
> +DECLARE_QCA_GPIO_PINS(81);
> +DECLARE_QCA_GPIO_PINS(82);
> +DECLARE_QCA_GPIO_PINS(83);
> +DECLARE_QCA_GPIO_PINS(84);
> +DECLARE_QCA_GPIO_PINS(85);
> +DECLARE_QCA_GPIO_PINS(86);
> +DECLARE_QCA_GPIO_PINS(87);
> +DECLARE_QCA_GPIO_PINS(88);
> +DECLARE_QCA_GPIO_PINS(89);
> +DECLARE_QCA_GPIO_PINS(90);
> +DECLARE_QCA_GPIO_PINS(91);
> +DECLARE_QCA_GPIO_PINS(92);
> +DECLARE_QCA_GPIO_PINS(93);
> +DECLARE_QCA_GPIO_PINS(94);
> +DECLARE_QCA_GPIO_PINS(95);
> +DECLARE_QCA_GPIO_PINS(96);
> +DECLARE_QCA_GPIO_PINS(97);
> +DECLARE_QCA_GPIO_PINS(98);
> +DECLARE_QCA_GPIO_PINS(99);
> +
> +#define FUNCTION(fname) \
> + [qca_mux_##fname] = { \
> + .name = #fname, \
> + .groups = fname##_groups, \
> + .ngroups = ARRAY_SIZE(fname##_groups), \
> + }
> +
> +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9, f10, f11, f12, f13, f14) \
> + { \
> + .name = "gpio" #id, \
> + .pins = gpio##id##_pins, \
> + .npins = (unsigned)ARRAY_SIZE(gpio##id##_pins), \
> + .funcs = (int[]){ \
> + qca_mux_NA, /* gpio mode */ \
> + qca_mux_##f1, \
> + qca_mux_##f2, \
> + qca_mux_##f3, \
> + qca_mux_##f4, \
> + qca_mux_##f5, \
> + qca_mux_##f6, \
> + qca_mux_##f7, \
> + qca_mux_##f8, \
> + qca_mux_##f9, \
> + qca_mux_##f10, \
> + qca_mux_##f11, \
> + qca_mux_##f12, \
> + qca_mux_##f13, \
> + qca_mux_##f14 \
> + }, \
> + .nfuncs = 15, \
> + .ctl_reg = 0x1000 + 0x10 * id, \
> + .io_reg = 0x1004 + 0x10 * id, \
> + .intr_cfg_reg = 0x1008 + 0x10 * id, \
> + .intr_status_reg = 0x100c + 0x10 * id, \
> + .intr_target_reg = 0x400 + 0x4 * id, \
> + .mux_bit = 2, \
> + .pull_bit = 0, \
> + .drv_bit = 6, \
> + .oe_bit = 9, \
> + .in_bit = 0, \
> + .out_bit = 1, \
> + .intr_enable_bit = 0, \
> + .intr_status_bit = 0, \
> + .intr_target_bit = 5, \
> + .intr_raw_status_bit = 4, \
> + .intr_polarity_bit = 1, \
> + .intr_detection_bit = 2, \
> + .intr_detection_width = 2, \
> + }
> +
> +
> +enum ipq4019_functions {
> + qca_mux_gpio,
> + qca_mux_blsp_uart1,
> + qca_mux_blsp_i2c0,
> + qca_mux_blsp_i2c1,
> + qca_mux_blsp_uart0,
> + qca_mux_blsp_spi1,
> + qca_mux_blsp_spi0,
> + qca_mux_NA,
> +};
> +
> +static const char * const gpio_groups[] = {
> + "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
> + "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
> + "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
> + "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
> + "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
> + "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
> + "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
> + "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
> + "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
> + "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
> + "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
> + "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
> + "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
> + "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
> + "gpio99",
> +};
> +
> +static const char * const blsp_uart1_groups[] = {
> + "gpio8", "gpio9", "gpio10", "gpio11",
> +};
> +static const char * const blsp_i2c0_groups[] = {
> + "gpio10", "gpio11", "gpio20", "gpio21", "gpio58", "gpio59",
> +};
> +static const char * const blsp_spi0_groups[] = {
> + "gpio12", "gpio13", "gpio14", "gpio15", "gpio45",
> + "gpio54", "gpio55", "gpio56", "gpio57",
> +};
> +static const char * const blsp_i2c1_groups[] = {
> + "gpio12", "gpio13", "gpio34", "gpio35",
> +};
> +static const char * const blsp_uart0_groups[] = {
> + "gpio16", "gpio17", "gpio60", "gpio61",
> +};
> +static const char * const blsp_spi1_groups[] = {
> + "gpio44", "gpio45", "gpio46", "gpio47",
> +};
> +
> +static const struct msm_function ipq4019_functions[] = {
> + FUNCTION(gpio),
> + FUNCTION(blsp_uart1),
> + FUNCTION(blsp_i2c0),
> + FUNCTION(blsp_i2c1),
> + FUNCTION(blsp_uart0),
> + FUNCTION(blsp_spi1),
> + FUNCTION(blsp_spi0),
> +};
> +
> +static const struct msm_pingroup ipq4019_groups[] = {
> + PINGROUP(0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(2, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(3, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(4, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(5, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(6, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(7, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(8, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(9, blsp_uart1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(10, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(11, blsp_uart1, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(12, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(13, blsp_spi0, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(14, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(15, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(16, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(17, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(18, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(19, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(20, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(21, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(22, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(23, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(24, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(25, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(26, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(27, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(28, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(29, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(30, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(31, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(32, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(33, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(34, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(35, blsp_i2c1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(36, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(37, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(38, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(39, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(40, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(41, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(42, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(43, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(44, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(45, NA, blsp_spi1, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(46, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(47, NA, blsp_spi1, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(48, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(49, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(50, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(51, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(52, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(53, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(54, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(55, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(56, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(57, NA, blsp_spi0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(58, NA, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(59, NA, blsp_i2c0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(60, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(61, NA, blsp_uart0, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(62, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(63, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(65, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(67, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(68, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> + PINGROUP(69, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
> +};
> +
> +static const struct msm_pinctrl_soc_data ipq4019_pinctrl = {
> + .pins = ipq4019_pins,
> + .npins = ARRAY_SIZE(ipq4019_pins),
> + .functions = ipq4019_functions,
> + .nfunctions = ARRAY_SIZE(ipq4019_functions),
> + .groups = ipq4019_groups,
> + .ngroups = ARRAY_SIZE(ipq4019_groups),
> + .ngpios = 70,
> +};
> +
> +static int ipq4019_pinctrl_probe(struct platform_device *pdev)
> +{
> + return msm_pinctrl_probe(pdev, &ipq4019_pinctrl);
> +}
> +
> +static const struct of_device_id ipq4019_pinctrl_of_match[] = {
> + { .compatible = "qcom,ipq4019-pinctrl", },
> + { },
> +};
> +
> +static struct platform_driver ipq4019_pinctrl_driver = {
> + .driver = {
> + .name = "ipq4019-pinctrl",
> + .owner = THIS_MODULE,
> + .of_match_table = ipq4019_pinctrl_of_match,
> + },
> + .probe = ipq4019_pinctrl_probe,
> + .remove = msm_pinctrl_remove,
> +};
> +
> +static int __init ipq4019_pinctrl_init(void)
> +{
> + return platform_driver_register(&ipq4019_pinctrl_driver);
> +}
> +arch_initcall(ipq4019_pinctrl_init);
> +
> +static void __exit ipq4019_pinctrl_exit(void)
> +{
> + platform_driver_unregister(&ipq4019_pinctrl_driver);
> +}
> +module_exit(ipq4019_pinctrl_exit);
> +
> +MODULE_DESCRIPTION("Qualcomm ipq4019 pinctrl driver");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DEVICE_TABLE(of, ipq4019_pinctrl_of_match);
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-20 16:35 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 23:19 [PATCH v3 0/6] arm: qcom: Add support for IPQ8014 family of SoCs Matthew McClintock
2015-11-19 23:19 ` [PATCH v3 1/6] pinctrl: qcom: ipq4019: Add IPQ4019 pinctrl support Matthew McClintock
2015-11-20 16:35 ` Rob Herring [this message]
2015-12-11 4:03 ` [v3,1/6] " Andy Gross
2016-02-15 0:41 ` [PATCH v3 1/6] " Bjorn Andersson
2016-02-16 14:53 ` Linus Walleij
2016-02-16 14:54 ` Linus Walleij
2016-02-16 16:31 ` Matthew McClintock
2016-02-16 16:31 ` Matthew McClintock
2015-11-19 23:19 ` [PATCH v3 2/6] clk: qcom: Add IPQ4019 Global Clock Controller support Matthew McClintock
2015-12-11 4:06 ` [v3,2/6] " Andy Gross
2016-02-25 22:33 ` [PATCH v3 2/6] " Stephen Boyd
2015-11-19 23:19 ` [PATCH v3 3/6] ARM: qcom: add IPQ4019 compatible match Matthew McClintock
2016-02-08 22:46 ` Stephen Boyd
2015-11-19 23:19 ` [PATCH v3 4/6] qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC Matthew McClintock
2015-11-19 23:19 ` Matthew McClintock
2015-11-19 23:19 ` Matthew McClintock
2016-02-08 22:45 ` Stephen Boyd
2016-02-08 22:45 ` Stephen Boyd
2015-11-19 23:19 ` [PATCH v3 5/6] dts: ipq4019: Add support for IPQ4019 DK01 board Matthew McClintock
2015-11-19 23:19 ` Matthew McClintock
2016-02-08 22:43 ` Stephen Boyd
2016-02-08 22:43 ` Stephen Boyd
2016-02-16 20:43 ` Matthew McClintock
2016-02-16 20:43 ` Matthew McClintock
2016-02-16 20:43 ` Matthew McClintock
[not found] ` <59152C1B-683F-417D-9C23-C6E3F53D7096-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2016-02-19 2:43 ` Stephen Boyd
2016-02-19 2:43 ` Stephen Boyd
2016-02-19 2:43 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151120163508.GA6680@rob-hp-laptop \
--to=robh@kernel.org \
--cc=agross@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mathieu@codeaurora.org \
--cc=mmcclint@codeaurora.org \
--cc=mmcclint@qca.qualcomm.com \
--cc=qca-upstream.external@qca.qualcomm.com \
--cc=sricharan@codeaurora.org \
--cc=varada@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.