From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Date: Tue, 24 Nov 2015 03:02:46 +0000 Subject: Re: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.5 Message-Id: <20151124030246.GL21853@verge.net.au> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-arm-kernel@lists.infradead.org On Thu, Nov 19, 2015 at 05:05:25PM -0800, Simon Horman wrote: > Hi Olof, Hi Kevin, Hi Arnd, > > Please consider these Renesas ARM based SoC DT updates for v4.5. > > > The following changes since commit 99f7445ea41c0187cd2e78bcb58cdd9e6c1756e5: > > ARM: shmobile: porter: enable internal PCI and USB PHY (2015-10-13 10:00:12 +0900) > > are available in the git repository at: The above is commit is the head of the last pull request I sent for Renesas DT updates for v4.4, taged as renesas-dt2-for-v4.4. Someohow it was not rebased on top of v4.4-rc1 although that was my intention. I don't think it should make any difference but if you would like me to rebase and repost please let me know. > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.5 > > for you to fetch changes up to d537543b3948bc3bc9dede248fa455493e055457: > > ARM: shmobile: alt: add VIN0, ADV7180 DT support (2015-11-18 09:10:38 -0800) > > ---------------------------------------------------------------- > Renesas ARM Based SoC DT Updates for v4.5 > > * henninger: Remove as it is now replaced by silk > * koelsch: Move SPI partitions to subnode > * porter: Add CAN0 and HS-USB support > * r8a7793/gose: Add QSPI, PFC support > * r8a7793: Add GPIO, DMAC, theral, IPMMU support > * r8a7794/alt: Add DU support > * r8a7794: Disable all IPMMU nodes by default > * r8a779[0134]: Use Use SoC specific binding for rcar-dmac > * r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with > wakeup-source property > * r8a779[14]: Correct "gpio-ranges" properties > * r8a779[14]: Remove bogus imp_clk node > * silk: Add SDHI1 support > > ---------------------------------------------------------------- > Geert Uytterhoeven (3): > ARM: shmobile: r8a7794 dtsi: Remove bogus imp_clk node > ARM: shmobile: r8a7791 dtsi: Remove bogus imp_clk node > ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode > > Laurent Pinchart (2): > ARM: shmobile: r8a7794: Add DU0 clock > ARM: shmobile: r8a7794: Add DU node to device tree > > Magnus Damm (4): > ARM: shmobile: r8a7794: Disable all IPMMU nodes by default > ARM: shmobile: r8a7793: Add IPMMU nodes > ARM: shmobile: r8a7794: alt: Enable VGA port > ARM: shmobile: r8a7793: Add GPIO nodes to device tree > > Sergei Shtylyov (6): > ARM: shmobile: porter: add HS-USB DT support > ARM: shmobile: silk: add SDHI1 DT support > ARM: shmobile: r8a7790: fix "gpio-ranges" props > ARM: shmobile: r8a7791: fix "gpio-ranges" props > ARM: shmobile: porter: add CAN0 DT support > ARM: shmobile: henninger: remove board DT > > Simon Horman (11): > ARM: shmobile: r8a7793: Add thermal device to DT > ARM: shmobile: r8a7793: Add PFC to DT > ARM: shmobile: gose: Configure PFC in DT > ARM: shmobile: r8a7793: Add DMAC devices to DT > ARM: shmobile: r8a7793: Add QSPI device to DT > ARM: shmobile: gose: Add QSPI device to DT > ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: alt: Add pfc pins to DT > > Sudeep Holla (1): > ARM: dts: shmobile/r8a7xxx: replace gpio-key, wakeup with wakeup-source property > > Ulrich Hecht (2): > ARM: shmobile: alt: add I2C1 DT support > ARM: shmobile: alt: add VIN0, ADV7180 DT support > > arch/arm/boot/dts/Makefile | 1 - > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +- > arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 +- > arch/arm/boot/dts/r8a7790-lager.dts | 8 +- > arch/arm/boot/dts/r8a7790.dtsi | 12 +- > arch/arm/boot/dts/r8a7791-henninger.dts | 320 -------------------------- > arch/arm/boot/dts/r8a7791-koelsch.dts | 55 ++--- > arch/arm/boot/dts/r8a7791-porter.dts | 20 ++ > arch/arm/boot/dts/r8a7791.dtsi | 18 +- > arch/arm/boot/dts/r8a7793-gose.dts | 74 ++++++ > arch/arm/boot/dts/r8a7793.dtsi | 294 +++++++++++++++++++++++ > arch/arm/boot/dts/r8a7794-alt.dts | 125 ++++++++++ > arch/arm/boot/dts/r8a7794-silk.dts | 40 ++++ > arch/arm/boot/dts/r8a7794.dtsi | 49 ++-- > arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +- > include/dt-bindings/clock/r8a7794-clock.h | 1 + > 16 files changed, 637 insertions(+), 386 deletions(-) > delete mode 100644 arch/arm/boot/dts/r8a7791-henninger.dts > From mboxrd@z Thu Jan 1 00:00:00 1970 From: horms@verge.net.au (Simon Horman) Date: Tue, 24 Nov 2015 12:02:46 +0900 Subject: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.5 In-Reply-To: References: Message-ID: <20151124030246.GL21853@verge.net.au> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, Nov 19, 2015 at 05:05:25PM -0800, Simon Horman wrote: > Hi Olof, Hi Kevin, Hi Arnd, > > Please consider these Renesas ARM based SoC DT updates for v4.5. > > > The following changes since commit 99f7445ea41c0187cd2e78bcb58cdd9e6c1756e5: > > ARM: shmobile: porter: enable internal PCI and USB PHY (2015-10-13 10:00:12 +0900) > > are available in the git repository at: The above is commit is the head of the last pull request I sent for Renesas DT updates for v4.4, taged as renesas-dt2-for-v4.4. Someohow it was not rebased on top of v4.4-rc1 although that was my intention. I don't think it should make any difference but if you would like me to rebase and repost please let me know. > git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.5 > > for you to fetch changes up to d537543b3948bc3bc9dede248fa455493e055457: > > ARM: shmobile: alt: add VIN0, ADV7180 DT support (2015-11-18 09:10:38 -0800) > > ---------------------------------------------------------------- > Renesas ARM Based SoC DT Updates for v4.5 > > * henninger: Remove as it is now replaced by silk > * koelsch: Move SPI partitions to subnode > * porter: Add CAN0 and HS-USB support > * r8a7793/gose: Add QSPI, PFC support > * r8a7793: Add GPIO, DMAC, theral, IPMMU support > * r8a7794/alt: Add DU support > * r8a7794: Disable all IPMMU nodes by default > * r8a779[0134]: Use Use SoC specific binding for rcar-dmac > * r8a779[01], r8a73a4, r8a7740, sh73a0: replace gpio-key, wakeup with > wakeup-source property > * r8a779[14]: Correct "gpio-ranges" properties > * r8a779[14]: Remove bogus imp_clk node > * silk: Add SDHI1 support > > ---------------------------------------------------------------- > Geert Uytterhoeven (3): > ARM: shmobile: r8a7794 dtsi: Remove bogus imp_clk node > ARM: shmobile: r8a7791 dtsi: Remove bogus imp_clk node > ARM: shmobile: koelsch: Move SPI FLASH partitions to subnode > > Laurent Pinchart (2): > ARM: shmobile: r8a7794: Add DU0 clock > ARM: shmobile: r8a7794: Add DU node to device tree > > Magnus Damm (4): > ARM: shmobile: r8a7794: Disable all IPMMU nodes by default > ARM: shmobile: r8a7793: Add IPMMU nodes > ARM: shmobile: r8a7794: alt: Enable VGA port > ARM: shmobile: r8a7793: Add GPIO nodes to device tree > > Sergei Shtylyov (6): > ARM: shmobile: porter: add HS-USB DT support > ARM: shmobile: silk: add SDHI1 DT support > ARM: shmobile: r8a7790: fix "gpio-ranges" props > ARM: shmobile: r8a7791: fix "gpio-ranges" props > ARM: shmobile: porter: add CAN0 DT support > ARM: shmobile: henninger: remove board DT > > Simon Horman (11): > ARM: shmobile: r8a7793: Add thermal device to DT > ARM: shmobile: r8a7793: Add PFC to DT > ARM: shmobile: gose: Configure PFC in DT > ARM: shmobile: r8a7793: Add DMAC devices to DT > ARM: shmobile: r8a7793: Add QSPI device to DT > ARM: shmobile: gose: Add QSPI device to DT > ARM: shmobile: r8a7790: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: r8a7791: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: r8a7793: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: r8a7794: Use SoC specific binding for rcar-dmac nodes > ARM: shmobile: alt: Add pfc pins to DT > > Sudeep Holla (1): > ARM: dts: shmobile/r8a7xxx: replace gpio-key, wakeup with wakeup-source property > > Ulrich Hecht (2): > ARM: shmobile: alt: add I2C1 DT support > ARM: shmobile: alt: add VIN0, ADV7180 DT support > > arch/arm/boot/dts/Makefile | 1 - > arch/arm/boot/dts/r8a73a4-ape6evm.dts | 2 +- > arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 2 +- > arch/arm/boot/dts/r8a7790-lager.dts | 8 +- > arch/arm/boot/dts/r8a7790.dtsi | 12 +- > arch/arm/boot/dts/r8a7791-henninger.dts | 320 -------------------------- > arch/arm/boot/dts/r8a7791-koelsch.dts | 55 ++--- > arch/arm/boot/dts/r8a7791-porter.dts | 20 ++ > arch/arm/boot/dts/r8a7791.dtsi | 18 +- > arch/arm/boot/dts/r8a7793-gose.dts | 74 ++++++ > arch/arm/boot/dts/r8a7793.dtsi | 294 +++++++++++++++++++++++ > arch/arm/boot/dts/r8a7794-alt.dts | 125 ++++++++++ > arch/arm/boot/dts/r8a7794-silk.dts | 40 ++++ > arch/arm/boot/dts/r8a7794.dtsi | 49 ++-- > arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +- > include/dt-bindings/clock/r8a7794-clock.h | 1 + > 16 files changed, 637 insertions(+), 386 deletions(-) > delete mode 100644 arch/arm/boot/dts/r8a7791-henninger.dts >