From: Marc MERLIN <marc_xorg@merlins.org>
To: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org, vcheng@debian.org
Subject: Xorg[9132]: segfault at 0 ip 00007fbc84d6fb0d sp 00007ffca3765610 error 4 in intel_drv.so[7fbc84d4d000+18b000]
Date: Sat, 28 Nov 2015 09:54:50 -0800 [thread overview]
Message-ID: <20151128175450.GA8526@merlins.org> (raw)
In-Reply-To: <874mgkek52.fsf@intel.com>
On Tue, Nov 17, 2015 at 05:11:05PM +0200, Jani Nikula wrote:
> On Tue, 17 Nov 2015, Marc MERLIN <marc_xorg@merlins.org> wrote:
> > So, this is probably the 3rd time I send such a report with different
> > kernels and get 0 response.
> > Is this a write only list and no one is really seeing any of them, or is
> > this an unknown/known problem that no one can work on?
>
> Apologies; nothing wrong with your report, our fail.
>
> Given all your attempts I hate to ask, but please do give v4.3 or later
> a try. If that fails too, please file a bug at [1]. Add drm.debug=14
> module parameter, and attach dmesg from boot to the bug.
I'm now running 4.3.0 and haven't had the same problem yet. But for the
first time, X has crashed after a few days of use:
Sadly I don't have a backtrace on this, but if you need me to dump symbols
on /usr/lib/xorg/modules/drivers/intel_drv.so, let me know.
ii xserver-xorg 1:7.7+12 amd64 X.Org X server
ii xserver-xorg-vide 2:2.99.917-2 amd64 X.Org X server -- Intel i8xx, i9xx disp
dmesg before the crash:
[608609.761552] [drm:check_crtc_state] [CRTC:21]
[608609.761563] [drm:check_shared_dpll_state] WRPLL 1
[608609.761565] [drm:check_shared_dpll_state] WRPLL 2
[608609.761640] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=0/4789
[608609.761642] [drm:intel_panel_actually_set_backlight] set backlight PWM = 56
[608609.761650] [drm:intel_edp_backlight_power] panel power control backlight disable
[608609.969137] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1429/4789
[608609.969143] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1468
[608609.969152] [drm:intel_edp_backlight_power] panel power control backlight enable
[608609.973545] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1431/4789
[608609.973550] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1470
[608609.977560] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1432/4789
[608609.977564] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1471
[608609.981131] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1433/4789
[608609.981136] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1472
[608609.986773] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1434/4789
[608609.986778] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1473
[608609.990295] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1435/4789
[608609.990300] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1474
[608610.010694] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1435/4789
[608610.010698] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1474
[608610.059590] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=1436/4789
[608610.059594] [drm:intel_panel_actually_set_backlight] set backlight PWM = 1475
[608610.114580] [drm:drm_mode_addfb2] [FB:64]
[608612.723962] [drm:edp_panel_vdd_off_sync] Turning eDP port D VDD off
[608612.723976] [drm:edp_panel_vdd_off_sync] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[608617.054802] [drm:drm_mode_addfb2] [FB:64]
[608626.995484] [drm:drm_mode_addfb2] [FB:64]
[608636.998296] [drm:drm_mode_addfb2] [FB:64]
[608646.982420] [drm:drm_mode_addfb2] [FB:58]
[608656.976622] [drm:drm_mode_addfb2] [FB:64]
[608666.971204] [drm:drm_mode_addfb2] [FB:64]
[608676.974639] [drm:drm_mode_addfb2] [FB:58]
[608687.042452] [drm:drm_mode_addfb2] [FB:64]
[608696.963229] [drm:drm_mode_addfb2] [FB:58]
[608717.282594] [drm:drm_mode_addfb2] [FB:59]
[608726.950478] [drm:drm_mode_addfb2] [FB:58]
[608746.959069] [drm:drm_mode_addfb2] [FB:59]
[608756.945777] [drm:drm_mode_addfb2] [FB:59]
[608775.437527] Xorg[9132]: segfault at 0 ip 00007fbc84d6fb0d sp 00007ffca3765610 error 4 in
intel_drv.so[7fbc84d4d000+18b000]
legolas:~$ grep intel /var/log/dmesg
[ 0.301152] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 1.125533] intel_idle: MWAIT substates: 0x42120
[ 1.125534] intel_idle: v0.4 model 0x3C
[ 1.125535] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.127766] [drm:intel_detect_pch] Found LynxPoint PCH
[ 1.128951] [drm:intel_opregion_setup] graphic opregion physical addr: 0xdcf45018
[ 1.128957] [drm:intel_opregion_setup] Public ACPI methods supported
[ 1.128958] [drm:intel_opregion_setup] SWSCI supported
[ 1.134961] [drm:intel_opregion_setup] ASLE supported
[ 1.135077] [drm:intel_device_info_runtime_init] slice total: 0
[ 1.135078] [drm:intel_device_info_runtime_init] subslice total: 0
[ 1.135079] [drm:intel_device_info_runtime_init] subslice per slice: 0
[ 1.135080] [drm:intel_device_info_runtime_init] EU total: 0
[ 1.135081] [drm:intel_device_info_runtime_init] EU per subslice: 0
[ 1.135082] [drm:intel_device_info_runtime_init] has slice power gating: n
[ 1.135083] [drm:intel_device_info_runtime_init] has subslice power gating: n
[ 1.135084] [drm:intel_device_info_runtime_init] has EU power gating: n
[ 1.135127] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[ 1.135132] [drm:intel_power_well_enable] enabling always-on
[ 1.135133] [drm:intel_power_well_enable] enabling display
[ 1.135179] [drm:intel_print_wm_latency] Primary WM0 latency 20 (2.0 usec)
[ 1.135181] [drm:intel_print_wm_latency] Primary WM1 latency 4 (2.0 usec)
[ 1.135182] [drm:intel_print_wm_latency] Primary WM2 latency 36 (18.0 usec)
[ 1.135183] [drm:intel_print_wm_latency] Primary WM3 latency 90 (45.0 usec)
[ 1.135184] [drm:intel_print_wm_latency] Primary WM4 latency 160 (80.0 usec)
[ 1.135186] [drm:intel_print_wm_latency] Sprite WM0 latency 20 (2.0 usec)
[ 1.135187] [drm:intel_print_wm_latency] Sprite WM1 latency 4 (2.0 usec)
[ 1.135188] [drm:intel_print_wm_latency] Sprite WM2 latency 36 (18.0 usec)
[ 1.135189] [drm:intel_print_wm_latency] Sprite WM3 latency 90 (45.0 usec)
[ 1.135190] [drm:intel_print_wm_latency] Sprite WM4 latency 160 (80.0 usec)
[ 1.135191] [drm:intel_print_wm_latency] Cursor WM0 latency 20 (2.0 usec)
[ 1.135192] [drm:intel_print_wm_latency] Cursor WM1 latency 4 (2.0 usec)
[ 1.135193] [drm:intel_print_wm_latency] Cursor WM2 latency 36 (18.0 usec)
[ 1.135194] [drm:intel_print_wm_latency] Cursor WM3 latency 90 (45.0 usec)
[ 1.135196] [drm:intel_print_wm_latency] Cursor WM4 latency 160 (80.0 usec)
[ 1.135197] [drm:intel_modeset_init] 3 display pipes available.
[ 1.135214] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
[ 1.135215] [drm:intel_update_max_cdclk] Max CD clock rate: 540000 kHz
[ 1.135566] [drm:intel_crt_reset] crt adpa set to 0xf40000
[ 1.135572] [drm:intel_dp_init_connector] Adding DP connector on port B
[ 1.135599] [drm:intel_dp_aux_init] registering DPDDC-B bus for card0-DP-1
[ 1.135672] [drm:intel_dp_init_connector] Adding DP connector on port C
[ 1.135696] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-2
[ 1.135757] [drm:intel_dp_init_connector] Adding eDP connector on port D
[ 1.135790] [drm:intel_dp_init_panel_power_sequencer] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
[ 1.135791] [drm:intel_dp_init_panel_power_sequencer] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 1.135793] [drm:intel_dp_init_panel_power_sequencer] panel power up delay 200, power down delay 50, power cycle delay 600
[ 1.135794] [drm:intel_dp_init_panel_power_sequencer] backlight on delay 1, off delay 200
[ 1.135795] [drm:intel_dp_aux_init] registering DPDDC-D bus for card0-eDP-1
[ 1.136278] [drm:intel_dp_get_dpcd] DPCD: 11 0a 04 00 00 00 00 00 00 00 00 00 00 0b 00
[ 1.136922] [drm:intel_dp_print_rates] source rates: 162000, 270000, 540000
[ 1.136924] [drm:intel_dp_print_rates] sink rates: 162000, 270000
[ 1.136925] [drm:intel_dp_print_rates] common rates: 162000, 270000
[ 1.136939] [drm:intel_dp_init_panel_power_sequencer_registers] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x186906
[ 1.140550] [drm:intel_dp_drrs_init] VBT doesn't support DRRS
[ 1.140555] [drm:intel_panel_setup_backlight] Connector eDP-1 backlight initialized, enabled, brightness 4789/4789
[ 1.142783] [drm:intel_modeset_readout_hw_state] [CRTC:21] hw state readout: enabled
[ 1.142784] [drm:intel_modeset_readout_hw_state] [CRTC:25] hw state readout: disabled
[ 1.142786] [drm:intel_modeset_readout_hw_state] [CRTC:29] hw state readout: disabled
[ 1.142788] [drm:intel_modeset_readout_hw_state] WRPLL 1 hw state readout: crtc_mask 0x00000000, on 0
[ 1.142789] [drm:intel_modeset_readout_hw_state] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
[ 1.142791] [drm:intel_modeset_readout_hw_state] [ENCODER:32:DAC-32] hw state readout: disabled, pipe A
[ 1.142793] [drm:intel_modeset_readout_hw_state] [ENCODER:33:TMDS-33] hw state readout: disabled, pipe A
[ 1.142794] [drm:intel_modeset_readout_hw_state] [ENCODER:35:DP MST-35] hw state readout: disabled, pipe A
[ 1.142795] [drm:intel_modeset_readout_hw_state] [ENCODER:36:DP MST-36] hw state readout: disabled, pipe B
[ 1.142796] [drm:intel_modeset_readout_hw_state] [ENCODER:37:DP MST-37] hw state readout: disabled, pipe C
[ 1.142798] [drm:intel_modeset_readout_hw_state] [ENCODER:42:TMDS-42] hw state readout: disabled, pipe A
[ 1.142799] [drm:intel_modeset_readout_hw_state] [ENCODER:44:DP MST-44] hw state readout: disabled, pipe A
[ 1.142800] [drm:intel_modeset_readout_hw_state] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe B
[ 1.142801] [drm:intel_modeset_readout_hw_state] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe C
[ 1.142804] [drm:intel_modeset_readout_hw_state] [ENCODER:48:TMDS-48] hw state readout: enabled, pipe A
[ 1.142806] [drm:intel_modeset_readout_hw_state] [ENCODER:50:DP MST-50] hw state readout: disabled, pipe A
[ 1.142807] [drm:intel_modeset_readout_hw_state] [ENCODER:51:DP MST-51] hw state readout: disabled, pipe B
[ 1.142808] [drm:intel_modeset_readout_hw_state] [ENCODER:52:DP MST-52] hw state readout: disabled, pipe C
[ 1.142810] [drm:intel_modeset_readout_hw_state] [CONNECTOR:49:eDP-1] hw state readout: enabled
[ 1.142811] [drm:intel_modeset_readout_hw_state] [CONNECTOR:31:VGA-1] hw state readout: disabled
[ 1.142813] [drm:intel_modeset_readout_hw_state] [CONNECTOR:34:DP-1] hw state readout: disabled
[ 1.142814] [drm:intel_modeset_readout_hw_state] [CONNECTOR:40:HDMI-A-1] hw state readout: disabled
[ 1.142815] [drm:intel_modeset_readout_hw_state] [CONNECTOR:43:DP-2] hw state readout: disabled
[ 1.142817] [drm:intel_modeset_readout_hw_state] [CONNECTOR:47:HDMI-A-2] hw state readout: disabled
[ 1.142824] [drm:intel_dump_pipe_config] [CRTC:21][setup_hw_state] config ffff88040ad78800 for pipe A
[ 1.142825] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 1.142826] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1.142828] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.142829] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 7048760, gmch_n: 8388608, link_m: 587396, link_n: 524288, tu: 64
[ 1.142831] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.142832] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.142833] [drm:intel_dump_pipe_config] requested mode:
[ 1.142836] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.142839] [drm:intel_dump_crtc_timings] crtc timings: 302499 2880 2924 2928 3076 1620 1629 1630 1640, type: 0x40 flags: 0x5
[ 1.142840] [drm:intel_dump_pipe_config] port clock: 270000
[ 1.142841] [drm:intel_dump_pipe_config] pipe src size: 720x400
[ 1.142842] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.142844] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.142845] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x0b400654, enabled
[ 1.142846] [drm:intel_dump_pipe_config] ips: 0
[ 1.142847] [drm:intel_dump_pipe_config] double wide: 0
[ 1.142848] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0
[ 1.142849] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.142850] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
[ 1.142852] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[ 1.142853] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 1.142855] [drm:intel_dump_pipe_config] [CRTC:25][setup_hw_state] config ffff880409bb0c00 for pipe B
[ 1.142856] [drm:intel_dump_pipe_config] cpu_transcoder: B
[ 1.142857] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 1.142859] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.142860] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.142861] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.142862] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.142863] [drm:intel_dump_pipe_config] requested mode:
[ 1.142866] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.142869] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.142870] [drm:intel_dump_pipe_config] port clock: 0
[ 1.142871] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 1.142872] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.142873] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.142874] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.142875] [drm:intel_dump_pipe_config] ips: 0
[ 1.142876] [drm:intel_dump_pipe_config] double wide: 0
[ 1.142877] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[ 1.142878] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.142879] [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
[ 1.142881] [drm:intel_dump_pipe_config] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
[ 1.142882] [drm:intel_dump_pipe_config] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
[ 1.142884] [drm:intel_dump_pipe_config] [CRTC:29][setup_hw_state] config ffff880409bb2c00 for pipe C
[ 1.142885] [drm:intel_dump_pipe_config] cpu_transcoder: C
[ 1.142886] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[ 1.142887] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.142888] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.142890] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.142891] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.142892] [drm:intel_dump_pipe_config] requested mode:
[ 1.142894] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.142897] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 1.142898] [drm:intel_dump_pipe_config] port clock: 0
[ 1.142899] [drm:intel_dump_pipe_config] pipe src size: 0x0
[ 1.142900] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.142901] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.142902] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.142903] [drm:intel_dump_pipe_config] ips: 0
[ 1.142904] [drm:intel_dump_pipe_config] double wide: 0
[ 1.142905] [drm:intel_dump_pipe_config] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0
[ 1.142906] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.142907] [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
[ 1.142909] [drm:intel_dump_pipe_config] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
[ 1.142910] [drm:intel_dump_pipe_config] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
[ 1.145191] [drm:intel_init_pipe_control] render ring pipe control offset: 0x00032000
[ 1.147074] [drm:intel_update_cdclk] Current CD clock rate: 540000 kHz
[ 1.147131] [drm:intel_backlight_device_register] Connector eDP-1 backlight sysfs interface registered
[ 1.147153] [drm:intel_dp_detect] [CONNECTOR:49:eDP-1]
[ 1.147218] [drm:intel_didl_outputs] 8 outputs detected
[ 1.147676] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1
[ 1.147679] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[ 1.157025] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[ 1.157027] [drm:intel_crt_detect] CRT not detected via hotplug
[ 1.157454] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 1.157455] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 1.157835] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 1.157837] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 1.157845] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[ 1.157851] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[ 1.226951] [drm:intel_dp_detect] [CONNECTOR:43:DP-2]
[ 1.226957] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2]
[ 1.227342] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
[ 1.227344] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
[ 1.227345] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 2880x1620
[ 1.227346] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[ 1.227347] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[ 1.227348] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[ 1.227349] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
[ 1.227350] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
[ 1.227355] [drm:intelfb_create] no BIOS fb, allocating a new one
[ 1.238198] [drm:intelfb_create] allocated 2880x1620 fb: 0x000c0000, bo ffff88040b1abdc0
[ 1.238336] fbcon: inteldrmfb (fb0) is primary device
[ 1.238427] [drm:intel_dp_compute_config] DP link computation with max lane count 4 max bw 270000 pixel clock 302500KHz
[ 1.238431] [drm:intel_dp_compute_config] DP link bw 0a lane count 4 clock 270000 bpp 24
[ 1.238431] [drm:intel_dp_compute_config] DP link bw required 726000 available 864000
[ 1.238433] [drm:intel_modeset_pipe_config] plane bpp: 36, pipe bpp: 24, dithering: 0
[ 1.238434] [drm:intel_dump_pipe_config] [CRTC:21][modeset] config ffff880409695000 for pipe A
[ 1.238435] [drm:intel_dump_pipe_config] cpu_transcoder: A
[ 1.238435] [drm:intel_dump_pipe_config] pipe bpp: 24, dithering: 0
[ 1.238437] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 1.238438] [drm:intel_dump_pipe_config] dp: 1, gmch_m: 7048760, gmch_n: 8388608, link_m: 587396, link_n: 524288, tu: 64
[ 1.238439] [drm:intel_dump_pipe_config] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[ 1.238439] [drm:intel_dump_pipe_config] audio: 0, infoframes: 0
[ 1.238440] [drm:intel_dump_pipe_config] requested mode:
[ 1.238442] [drm:intel_dump_pipe_config] adjusted mode:
[ 1.238445] [drm:intel_dump_crtc_timings] crtc timings: 302500 2880 2924 2928 3076 1620 1629 1630 1640, type: 0x48 flags: 0x5
[ 1.238445] [drm:intel_dump_pipe_config] port clock: 270000
[ 1.238446] [drm:intel_dump_pipe_config] pipe src size: 2880x1620
[ 1.238446] [drm:intel_dump_pipe_config] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
[ 1.238447] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 1.238448] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 1.238449] [drm:intel_dump_pipe_config] ips: 0
[ 1.238449] [drm:intel_dump_pipe_config] double wide: 0
[ 1.238450] [drm:intel_dump_pipe_config] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0
[ 1.238450] [drm:intel_dump_pipe_config] planes on this crtc
[ 1.238451] [drm:intel_dump_pipe_config] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
[ 1.238452] [drm:intel_dump_pipe_config] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
[ 1.238453] [drm:intel_dump_pipe_config] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
[ 1.240521] [drm:intel_edp_backlight_off]
[ 1.442903] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[ 1.442918] [drm:intel_disable_pipe] disabling pipe A
[ 1.507480] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00800000, dig 0x00121010, pins 0x00000080
[ 1.507481] [drm:intel_hpd_irq_handler] digital hpd port D - long
[ 1.507482] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 7 - cnt: 0
[ 1.507505] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port D
[ 2.207826] [drm:intel_get_hpd_pins] hotplug event received, stat 0x00800000, dig 0x00121010, pins 0x00000080
[ 2.207827] [drm:intel_hpd_irq_handler] digital hpd port D - long
[ 2.207829] [drm:intel_hpd_irq_storm_detect] Received HPD interrupt on PIN 7 - cnt: 1
[ 2.207851] [drm:intel_dp_hpd_pulse] ignoring long hpd on eDP port D
[ 2.260530] [drm:intel_dp_set_signal_levels] Using signal levels 00000000
[ 2.260531] [drm:intel_dp_set_signal_levels] Using vswing level 0
[ 2.260532] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 2.261193] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[ 2.261193] [drm:intel_dp_set_signal_levels] Using vswing level 1
[ 2.261195] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 2.261840] [drm:intel_dp_set_signal_levels] Using signal levels 04000000
[ 2.261840] [drm:intel_dp_set_signal_levels] Using vswing level 1
[ 2.261841] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0
[ 2.262487] [drm:intel_dp_start_link_train] clock recovery OK
[ 2.263446] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[ 2.263447] [drm:intel_dp_set_signal_levels] Using vswing level 1
[ 2.263448] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
[ 2.264390] [drm:intel_dp_set_signal_levels] Using signal levels 05000000
[ 2.264391] [drm:intel_dp_set_signal_levels] Using vswing level 1
[ 2.264391] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1
[ 2.267376] [drm:intel_dp_complete_link_train] Channel EQ done. DP Training successful
[ 2.267627] [drm:intel_enable_pipe] enabling pipe A
[ 2.267630] [drm:intel_edp_backlight_on]
[ 2.267631] [drm:intel_panel_enable_backlight] pipe A
[ 2.267634] [drm:intel_panel_actually_set_backlight] set backlight PWM = 4789
[ 2.267642] [drm:intel_psr_enable] PSR not supported by this panel
[ 2.267642] [drm:intel_edp_drrs_enable] Panel doesn't support DRRS
[ 2.301034] [drm:intel_connector_check_state] [CONNECTOR:49:eDP-1]
[ 2.301074] [drm:intel_dp_detect] [CONNECTOR:49:eDP-1]
[ 2.301610] [drm:intel_crt_detect] [CONNECTOR:31:VGA-1] force=1
[ 2.301612] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[ 2.301612] [drm:intel_crt_detect] CRT not detected via hotplug
[ 2.301981] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[ 2.301981] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[ 2.302353] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[ 2.302354] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[ 2.302357] [drm:intel_dp_detect] [CONNECTOR:34:DP-1]
[ 2.302360] [drm:intel_hdmi_detect] [CONNECTOR:40:HDMI-A-1]
[ 2.314553] [drm:intel_dp_detect] [CONNECTOR:43:DP-2]
[ 2.314556] [drm:intel_hdmi_detect] [CONNECTOR:47:HDMI-A-2]
[ 2.314928] [drm:intel_fb_initial_config] looking for cmdline mode on connector eDP-1
[ 2.314929] [drm:intel_fb_initial_config] looking for preferred mode on connector eDP-1 0
[ 2.314930] [drm:intel_fb_initial_config] connector eDP-1 on pipe A [CRTC:21]: 2880x1620
[ 2.314931] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[ 2.314931] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[ 2.314932] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[ 2.314932] [drm:intel_fb_initial_config] connector DP-2 not enabled, skipping
[ 2.314933] [drm:intel_fb_initial_config] connector HDMI-A-2 not enabled, skipping
[ 2.339971] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.800636] [drm:intel_print_rc6_info] Enabling RC6 states: RC6 on
[ 26.040533] intel_rapl: Found RAPL domain package
[ 26.041151] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops)
[ 26.046911] intel_rapl: Found RAPL domain core
[ 26.048332] intel_rapl: Found RAPL domain uncore
[ 26.049756] intel_rapl: Found RAPL domain dram
--
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems ....
.... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/ | PGP 1024R/763BE901
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-11-28 17:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-15 16:13 drivers/gpu/drm/i915/intel_display.c:9717 intel_check_page_flip+0xb3/0xd2() Marc MERLIN
2015-07-15 16:12 ` Marc MERLIN
2015-07-18 20:35 ` Marc MERLIN
2015-08-03 15:10 ` Marc MERLIN
2015-11-14 15:25 ` intel_display.c:3916 intel_crtc_wait_for_pending_flips+0xe9/0x1cd() intel_check_page_flip+0xb3/0xd2() Marc MERLIN
2015-11-17 3:21 ` Marc MERLIN
2015-11-17 15:11 ` Jani Nikula
2015-11-28 17:54 ` Marc MERLIN [this message]
2015-12-01 16:27 ` Xorg[9132]: segfault at 0 ip 00007fbc84d6fb0d sp 00007ffca3765610 error 4 in intel_drv.so[7fbc84d4d000+18b000] Marc MERLIN
2015-12-02 8:32 ` Jani Nikula
2015-12-14 22:11 ` Marc MERLIN
2015-12-15 10:42 ` Daniel Vetter
2015-12-15 10:55 ` Chris Wilson
2015-12-18 14:20 ` Marc MERLIN
2015-12-19 16:52 ` Marc MERLIN
2016-01-03 16:04 ` Intel graphics on Thinkpad T540p is most unsuable now :( (Intel(R) HD Graphics 4600) Marc MERLIN
2016-01-08 17:42 ` Marc MERLIN
2016-01-10 0:07 ` Marc MERLIN
2016-01-10 22:41 ` Daniel Kasak
2016-01-10 22:45 ` Marc MERLIN
2016-02-10 1:12 ` Marc MERLIN
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151128175450.GA8526@merlins.org \
--to=marc_xorg@merlins.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=vcheng@debian.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.