From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754632AbbK3TBy (ORCPT ); Mon, 30 Nov 2015 14:01:54 -0500 Received: from mail.kernel.org ([198.145.29.136]:51461 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754221AbbK3TBw (ORCPT ); Mon, 30 Nov 2015 14:01:52 -0500 Date: Mon, 30 Nov 2015 13:01:44 -0600 From: Rob Herring To: Damien Riegel Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org, Lee Jones , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Shawn Guo , Sascha Hauer , Arnd Bergmann , Samuel Ortiz , Wim Van Sebroeck , Guenter Roeck , kernel@savoirfairelinux.com Subject: Re: [PATCH v7 3/6] watchdog: ts4800: add driver for TS-4800 watchdog Message-ID: <20151130190144.GA32374@rob-hp-laptop> References: <1448899191-13891-1-git-send-email-damien.riegel@savoirfairelinux.com> <1448899191-13891-4-git-send-email-damien.riegel@savoirfairelinux.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1448899191-13891-4-git-send-email-damien.riegel@savoirfairelinux.com> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Mon, Nov 30, 2015 at 10:59:48AM -0500, Damien Riegel wrote: > This watchdog is instantiated in a FPGA that is memory mapped. It is > made of only one register, called the feed register. Writing to this > register will re-arm the watchdog for a given time (and enable it if it > was disable). It can be disabled by writing a special value into it. > > It is part of a syscon block, and the watchdog register offset in this > block varies from board to board. This offset is passed in the syscon > property after the phandle to the syscon node. > > Signed-off-by: Damien Riegel > --- > .../devicetree/bindings/watchdog/ts4800-wdt.txt | 25 +++ For the binding: Acked-by: Rob Herring > drivers/watchdog/Kconfig | 10 + > drivers/watchdog/Makefile | 1 + > drivers/watchdog/ts4800_wdt.c | 215 +++++++++++++++++++++ > 4 files changed, 251 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > create mode 100644 drivers/watchdog/ts4800_wdt.c > > diff --git a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > new file mode 100644 > index 0000000..8f6caad > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > @@ -0,0 +1,25 @@ > +Technologic Systems Watchdog > + > +Required properties: > +- compatible: must be "technologic,ts4800-wdt" > +- syscon: phandle / integer array that points to the syscon node which > + describes the FPGA's syscon registers. > + - phandle to FPGA's syscon > + - offset to the watchdog register > + > +Optional property: > +- timeout-sec: contains the watchdog timeout in seconds. > + > +Example: > + > +syscon: syscon@b0010000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0xb0010000 0x3d>; > + reg-io-width = <2>; > + > + wdt@e { > + compatible = "technologic,ts4800-wdt"; > + syscon = <&syscon 0xe>; > + timeout-sec = <10>; > + }; > +} > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 79e1aa1..bb624d2 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -426,6 +426,16 @@ config NUC900_WATCHDOG > To compile this driver as a module, choose M here: the > module will be called nuc900_wdt. > > +config TS4800_WATCHDOG > + tristate "TS-4800 Watchdog" > + depends on HAS_IOMEM && OF > + select WATCHDOG_CORE > + select MFD_SYSCON > + help > + Technologic Systems TS-4800 has watchdog timer implemented in > + an external FPGA. Say Y here if you want to support for the > + watchdog timer on TS-4800 board. > + > config TS72XX_WATCHDOG > tristate "TS-72XX SBC Watchdog" > depends on MACH_TS72XX > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 0c616e3..3863ce0 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -53,6 +53,7 @@ obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o > obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o > obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o > obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o > +obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o > obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o > obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o > obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o > diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c > new file mode 100644 > index 0000000..2b8de86 > --- /dev/null > +++ b/drivers/watchdog/ts4800_wdt.c > @@ -0,0 +1,215 @@ > +/* > + * Watchdog driver for TS-4800 based boards > + * > + * Copyright (c) 2015 - Savoir-faire Linux > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static bool nowayout = WATCHDOG_NOWAYOUT; > +module_param(nowayout, bool, 0); > +MODULE_PARM_DESC(nowayout, > + "Watchdog cannot be stopped once started (default=" > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > + > +/* possible feed values */ > +#define TS4800_WDT_FEED_2S 0x1 > +#define TS4800_WDT_FEED_10S 0x2 > +#define TS4800_WDT_DISABLE 0x3 > + > +struct ts4800_wdt { > + struct watchdog_device wdd; > + struct regmap *regmap; > + u32 feed_offset; > + u32 feed_val; > +}; > + > +/* > + * TS-4800 supports the following timeout values: > + * > + * value desc > + * --------------------- > + * 0 feed for 338ms > + * 1 feed for 2.706s > + * 2 feed for 10.824s > + * 3 disable watchdog > + * > + * Keep the regmap/timeout map ordered by timeout > + */ > +static const struct { > + const int timeout; > + const int regval; > +} ts4800_wdt_map[] = { > + { 2, TS4800_WDT_FEED_2S }, > + { 10, TS4800_WDT_FEED_10S }, > +}; > + > +#define MAX_TIMEOUT_INDEX (ARRAY_SIZE(ts4800_wdt_map) - 1) > + > +static void ts4800_write_feed(struct ts4800_wdt *wdt, u32 val) > +{ > + regmap_write(wdt->regmap, wdt->feed_offset, val); > +} > + > +static int ts4800_wdt_start(struct watchdog_device *wdd) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + > + ts4800_write_feed(wdt, wdt->feed_val); > + return 0; > +} > + > +static int ts4800_wdt_stop(struct watchdog_device *wdd) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + > + ts4800_write_feed(wdt, TS4800_WDT_DISABLE); > + return 0; > +} > + > +static int ts4800_wdt_set_timeout(struct watchdog_device *wdd, > + unsigned int timeout) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + int i; > + > + for (i = 0; i < MAX_TIMEOUT_INDEX; i++) { > + if (ts4800_wdt_map[i].timeout >= timeout) > + break; > + } > + > + wdd->timeout = ts4800_wdt_map[i].timeout; > + wdt->feed_val = ts4800_wdt_map[i].regval; > + > + return 0; > +} > + > +static const struct watchdog_ops ts4800_wdt_ops = { > + .owner = THIS_MODULE, > + .start = ts4800_wdt_start, > + .stop = ts4800_wdt_stop, > + .set_timeout = ts4800_wdt_set_timeout, > +}; > + > +static const struct watchdog_info ts4800_wdt_info = { > + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, > + .identity = "TS-4800 Watchdog", > +}; > + > +static int ts4800_wdt_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct device_node *syscon_np; > + struct watchdog_device *wdd; > + struct ts4800_wdt *wdt; > + u32 reg; > + int ret; > + > + syscon_np = of_parse_phandle(np, "syscon", 0); > + if (!syscon_np) { > + dev_err(&pdev->dev, "no syscon property\n"); > + return -ENODEV; > + } > + > + ret = of_property_read_u32_index(np, "syscon", 1, ®); > + if (ret < 0) { > + dev_err(&pdev->dev, "no offset in syscon\n"); > + return ret; > + } > + > + /* allocate memory for watchdog struct */ > + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); > + if (!wdt) > + return -ENOMEM; > + > + /* set regmap and offset to know where to write */ > + wdt->feed_offset = reg; > + wdt->regmap = syscon_node_to_regmap(syscon_np); > + if (IS_ERR(wdt->regmap)) { > + dev_err(&pdev->dev, "cannot get parent's regmap\n"); > + return PTR_ERR(wdt->regmap); > + } > + > + /* Initialize struct watchdog_device */ > + wdd = &wdt->wdd; > + wdd->parent = &pdev->dev; > + wdd->info = &ts4800_wdt_info; > + wdd->ops = &ts4800_wdt_ops; > + wdd->min_timeout = ts4800_wdt_map[0].timeout; > + wdd->max_timeout = ts4800_wdt_map[MAX_TIMEOUT_INDEX].timeout; > + > + watchdog_set_drvdata(wdd, wdt); > + watchdog_set_nowayout(wdd, nowayout); > + watchdog_init_timeout(wdd, 0, &pdev->dev); > + > + /* > + * As this watchdog supports only a few values, ts4800_wdt_set_timeout > + * must be called to initialize timeout and feed_val with valid values. > + * Default to maximum timeout if none, or an invalid one, is provided in > + * device tree. > + */ > + if (!wdd->timeout) > + wdd->timeout = wdd->max_timeout; > + ts4800_wdt_set_timeout(wdd, wdd->timeout); > + > + /* > + * The feed register is write-only, so it is not possible to determine > + * watchdog's state. Disable it to be in a known state. > + */ > + ts4800_wdt_stop(wdd); > + > + ret = watchdog_register_device(wdd); > + if (ret) { > + dev_err(&pdev->dev, > + "failed to register watchdog device\n"); > + return ret; > + } > + > + platform_set_drvdata(pdev, wdt); > + > + dev_info(&pdev->dev, > + "initialized (timeout = %d sec, nowayout = %d)\n", > + wdd->timeout, nowayout); > + > + return 0; > +} > + > +static int ts4800_wdt_remove(struct platform_device *pdev) > +{ > + struct ts4800_wdt *wdt = platform_get_drvdata(pdev); > + > + watchdog_unregister_device(&wdt->wdd); > + > + return 0; > +} > + > +static const struct of_device_id ts4800_wdt_of_match[] = { > + { .compatible = "technologic,ts4800-wdt", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, ts4800_wdt_of_match); > + > +static struct platform_driver ts4800_wdt_driver = { > + .probe = ts4800_wdt_probe, > + .remove = ts4800_wdt_remove, > + .driver = { > + .name = "ts4800_wdt", > + .of_match_table = ts4800_wdt_of_match, > + }, > +}; > + > +module_platform_driver(ts4800_wdt_driver); > + > +MODULE_AUTHOR("Damien Riegel "); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:ts4800_wdt"); > -- > 2.5.0 > From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: Re: [PATCH v7 3/6] watchdog: ts4800: add driver for TS-4800 watchdog Date: Mon, 30 Nov 2015 13:01:44 -0600 Message-ID: <20151130190144.GA32374@rob-hp-laptop> References: <1448899191-13891-1-git-send-email-damien.riegel@savoirfairelinux.com> <1448899191-13891-4-git-send-email-damien.riegel@savoirfairelinux.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1448899191-13891-4-git-send-email-damien.riegel-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Damien Riegel Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Lee Jones , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Shawn Guo , Sascha Hauer , Arnd Bergmann , Samuel Ortiz , Wim Van Sebroeck , Guenter Roeck , kernel-4ysUXcep3aM1wj+D4I0NRVaTQe2KTcn/@public.gmane.org List-Id: devicetree@vger.kernel.org On Mon, Nov 30, 2015 at 10:59:48AM -0500, Damien Riegel wrote: > This watchdog is instantiated in a FPGA that is memory mapped. It is > made of only one register, called the feed register. Writing to this > register will re-arm the watchdog for a given time (and enable it if it > was disable). It can be disabled by writing a special value into it. > > It is part of a syscon block, and the watchdog register offset in this > block varies from board to board. This offset is passed in the syscon > property after the phandle to the syscon node. > > Signed-off-by: Damien Riegel > --- > .../devicetree/bindings/watchdog/ts4800-wdt.txt | 25 +++ For the binding: Acked-by: Rob Herring > drivers/watchdog/Kconfig | 10 + > drivers/watchdog/Makefile | 1 + > drivers/watchdog/ts4800_wdt.c | 215 +++++++++++++++++++++ > 4 files changed, 251 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > create mode 100644 drivers/watchdog/ts4800_wdt.c > > diff --git a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > new file mode 100644 > index 0000000..8f6caad > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > @@ -0,0 +1,25 @@ > +Technologic Systems Watchdog > + > +Required properties: > +- compatible: must be "technologic,ts4800-wdt" > +- syscon: phandle / integer array that points to the syscon node which > + describes the FPGA's syscon registers. > + - phandle to FPGA's syscon > + - offset to the watchdog register > + > +Optional property: > +- timeout-sec: contains the watchdog timeout in seconds. > + > +Example: > + > +syscon: syscon@b0010000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0xb0010000 0x3d>; > + reg-io-width = <2>; > + > + wdt@e { > + compatible = "technologic,ts4800-wdt"; > + syscon = <&syscon 0xe>; > + timeout-sec = <10>; > + }; > +} > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 79e1aa1..bb624d2 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -426,6 +426,16 @@ config NUC900_WATCHDOG > To compile this driver as a module, choose M here: the > module will be called nuc900_wdt. > > +config TS4800_WATCHDOG > + tristate "TS-4800 Watchdog" > + depends on HAS_IOMEM && OF > + select WATCHDOG_CORE > + select MFD_SYSCON > + help > + Technologic Systems TS-4800 has watchdog timer implemented in > + an external FPGA. Say Y here if you want to support for the > + watchdog timer on TS-4800 board. > + > config TS72XX_WATCHDOG > tristate "TS-72XX SBC Watchdog" > depends on MACH_TS72XX > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 0c616e3..3863ce0 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -53,6 +53,7 @@ obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o > obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o > obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o > obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o > +obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o > obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o > obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o > obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o > diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c > new file mode 100644 > index 0000000..2b8de86 > --- /dev/null > +++ b/drivers/watchdog/ts4800_wdt.c > @@ -0,0 +1,215 @@ > +/* > + * Watchdog driver for TS-4800 based boards > + * > + * Copyright (c) 2015 - Savoir-faire Linux > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static bool nowayout = WATCHDOG_NOWAYOUT; > +module_param(nowayout, bool, 0); > +MODULE_PARM_DESC(nowayout, > + "Watchdog cannot be stopped once started (default=" > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > + > +/* possible feed values */ > +#define TS4800_WDT_FEED_2S 0x1 > +#define TS4800_WDT_FEED_10S 0x2 > +#define TS4800_WDT_DISABLE 0x3 > + > +struct ts4800_wdt { > + struct watchdog_device wdd; > + struct regmap *regmap; > + u32 feed_offset; > + u32 feed_val; > +}; > + > +/* > + * TS-4800 supports the following timeout values: > + * > + * value desc > + * --------------------- > + * 0 feed for 338ms > + * 1 feed for 2.706s > + * 2 feed for 10.824s > + * 3 disable watchdog > + * > + * Keep the regmap/timeout map ordered by timeout > + */ > +static const struct { > + const int timeout; > + const int regval; > +} ts4800_wdt_map[] = { > + { 2, TS4800_WDT_FEED_2S }, > + { 10, TS4800_WDT_FEED_10S }, > +}; > + > +#define MAX_TIMEOUT_INDEX (ARRAY_SIZE(ts4800_wdt_map) - 1) > + > +static void ts4800_write_feed(struct ts4800_wdt *wdt, u32 val) > +{ > + regmap_write(wdt->regmap, wdt->feed_offset, val); > +} > + > +static int ts4800_wdt_start(struct watchdog_device *wdd) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + > + ts4800_write_feed(wdt, wdt->feed_val); > + return 0; > +} > + > +static int ts4800_wdt_stop(struct watchdog_device *wdd) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + > + ts4800_write_feed(wdt, TS4800_WDT_DISABLE); > + return 0; > +} > + > +static int ts4800_wdt_set_timeout(struct watchdog_device *wdd, > + unsigned int timeout) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + int i; > + > + for (i = 0; i < MAX_TIMEOUT_INDEX; i++) { > + if (ts4800_wdt_map[i].timeout >= timeout) > + break; > + } > + > + wdd->timeout = ts4800_wdt_map[i].timeout; > + wdt->feed_val = ts4800_wdt_map[i].regval; > + > + return 0; > +} > + > +static const struct watchdog_ops ts4800_wdt_ops = { > + .owner = THIS_MODULE, > + .start = ts4800_wdt_start, > + .stop = ts4800_wdt_stop, > + .set_timeout = ts4800_wdt_set_timeout, > +}; > + > +static const struct watchdog_info ts4800_wdt_info = { > + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, > + .identity = "TS-4800 Watchdog", > +}; > + > +static int ts4800_wdt_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct device_node *syscon_np; > + struct watchdog_device *wdd; > + struct ts4800_wdt *wdt; > + u32 reg; > + int ret; > + > + syscon_np = of_parse_phandle(np, "syscon", 0); > + if (!syscon_np) { > + dev_err(&pdev->dev, "no syscon property\n"); > + return -ENODEV; > + } > + > + ret = of_property_read_u32_index(np, "syscon", 1, ®); > + if (ret < 0) { > + dev_err(&pdev->dev, "no offset in syscon\n"); > + return ret; > + } > + > + /* allocate memory for watchdog struct */ > + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); > + if (!wdt) > + return -ENOMEM; > + > + /* set regmap and offset to know where to write */ > + wdt->feed_offset = reg; > + wdt->regmap = syscon_node_to_regmap(syscon_np); > + if (IS_ERR(wdt->regmap)) { > + dev_err(&pdev->dev, "cannot get parent's regmap\n"); > + return PTR_ERR(wdt->regmap); > + } > + > + /* Initialize struct watchdog_device */ > + wdd = &wdt->wdd; > + wdd->parent = &pdev->dev; > + wdd->info = &ts4800_wdt_info; > + wdd->ops = &ts4800_wdt_ops; > + wdd->min_timeout = ts4800_wdt_map[0].timeout; > + wdd->max_timeout = ts4800_wdt_map[MAX_TIMEOUT_INDEX].timeout; > + > + watchdog_set_drvdata(wdd, wdt); > + watchdog_set_nowayout(wdd, nowayout); > + watchdog_init_timeout(wdd, 0, &pdev->dev); > + > + /* > + * As this watchdog supports only a few values, ts4800_wdt_set_timeout > + * must be called to initialize timeout and feed_val with valid values. > + * Default to maximum timeout if none, or an invalid one, is provided in > + * device tree. > + */ > + if (!wdd->timeout) > + wdd->timeout = wdd->max_timeout; > + ts4800_wdt_set_timeout(wdd, wdd->timeout); > + > + /* > + * The feed register is write-only, so it is not possible to determine > + * watchdog's state. Disable it to be in a known state. > + */ > + ts4800_wdt_stop(wdd); > + > + ret = watchdog_register_device(wdd); > + if (ret) { > + dev_err(&pdev->dev, > + "failed to register watchdog device\n"); > + return ret; > + } > + > + platform_set_drvdata(pdev, wdt); > + > + dev_info(&pdev->dev, > + "initialized (timeout = %d sec, nowayout = %d)\n", > + wdd->timeout, nowayout); > + > + return 0; > +} > + > +static int ts4800_wdt_remove(struct platform_device *pdev) > +{ > + struct ts4800_wdt *wdt = platform_get_drvdata(pdev); > + > + watchdog_unregister_device(&wdt->wdd); > + > + return 0; > +} > + > +static const struct of_device_id ts4800_wdt_of_match[] = { > + { .compatible = "technologic,ts4800-wdt", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, ts4800_wdt_of_match); > + > +static struct platform_driver ts4800_wdt_driver = { > + .probe = ts4800_wdt_probe, > + .remove = ts4800_wdt_remove, > + .driver = { > + .name = "ts4800_wdt", > + .of_match_table = ts4800_wdt_of_match, > + }, > +}; > + > +module_platform_driver(ts4800_wdt_driver); > + > +MODULE_AUTHOR("Damien Riegel "); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:ts4800_wdt"); > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: robh@kernel.org (Rob Herring) Date: Mon, 30 Nov 2015 13:01:44 -0600 Subject: [PATCH v7 3/6] watchdog: ts4800: add driver for TS-4800 watchdog In-Reply-To: <1448899191-13891-4-git-send-email-damien.riegel@savoirfairelinux.com> References: <1448899191-13891-1-git-send-email-damien.riegel@savoirfairelinux.com> <1448899191-13891-4-git-send-email-damien.riegel@savoirfairelinux.com> Message-ID: <20151130190144.GA32374@rob-hp-laptop> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Nov 30, 2015 at 10:59:48AM -0500, Damien Riegel wrote: > This watchdog is instantiated in a FPGA that is memory mapped. It is > made of only one register, called the feed register. Writing to this > register will re-arm the watchdog for a given time (and enable it if it > was disable). It can be disabled by writing a special value into it. > > It is part of a syscon block, and the watchdog register offset in this > block varies from board to board. This offset is passed in the syscon > property after the phandle to the syscon node. > > Signed-off-by: Damien Riegel > --- > .../devicetree/bindings/watchdog/ts4800-wdt.txt | 25 +++ For the binding: Acked-by: Rob Herring > drivers/watchdog/Kconfig | 10 + > drivers/watchdog/Makefile | 1 + > drivers/watchdog/ts4800_wdt.c | 215 +++++++++++++++++++++ > 4 files changed, 251 insertions(+) > create mode 100644 Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > create mode 100644 drivers/watchdog/ts4800_wdt.c > > diff --git a/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > new file mode 100644 > index 0000000..8f6caad > --- /dev/null > +++ b/Documentation/devicetree/bindings/watchdog/ts4800-wdt.txt > @@ -0,0 +1,25 @@ > +Technologic Systems Watchdog > + > +Required properties: > +- compatible: must be "technologic,ts4800-wdt" > +- syscon: phandle / integer array that points to the syscon node which > + describes the FPGA's syscon registers. > + - phandle to FPGA's syscon > + - offset to the watchdog register > + > +Optional property: > +- timeout-sec: contains the watchdog timeout in seconds. > + > +Example: > + > +syscon: syscon at b0010000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0xb0010000 0x3d>; > + reg-io-width = <2>; > + > + wdt at e { > + compatible = "technologic,ts4800-wdt"; > + syscon = <&syscon 0xe>; > + timeout-sec = <10>; > + }; > +} > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig > index 79e1aa1..bb624d2 100644 > --- a/drivers/watchdog/Kconfig > +++ b/drivers/watchdog/Kconfig > @@ -426,6 +426,16 @@ config NUC900_WATCHDOG > To compile this driver as a module, choose M here: the > module will be called nuc900_wdt. > > +config TS4800_WATCHDOG > + tristate "TS-4800 Watchdog" > + depends on HAS_IOMEM && OF > + select WATCHDOG_CORE > + select MFD_SYSCON > + help > + Technologic Systems TS-4800 has watchdog timer implemented in > + an external FPGA. Say Y here if you want to support for the > + watchdog timer on TS-4800 board. > + > config TS72XX_WATCHDOG > tristate "TS-72XX SBC Watchdog" > depends on MACH_TS72XX > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile > index 0c616e3..3863ce0 100644 > --- a/drivers/watchdog/Makefile > +++ b/drivers/watchdog/Makefile > @@ -53,6 +53,7 @@ obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o > obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o > obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o > obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o > +obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o > obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o > obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o > obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o > diff --git a/drivers/watchdog/ts4800_wdt.c b/drivers/watchdog/ts4800_wdt.c > new file mode 100644 > index 0000000..2b8de86 > --- /dev/null > +++ b/drivers/watchdog/ts4800_wdt.c > @@ -0,0 +1,215 @@ > +/* > + * Watchdog driver for TS-4800 based boards > + * > + * Copyright (c) 2015 - Savoir-faire Linux > + * > + * This file is licensed under the terms of the GNU General Public > + * License version 2. This program is licensed "as is" without any > + * warranty of any kind, whether express or implied. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static bool nowayout = WATCHDOG_NOWAYOUT; > +module_param(nowayout, bool, 0); > +MODULE_PARM_DESC(nowayout, > + "Watchdog cannot be stopped once started (default=" > + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); > + > +/* possible feed values */ > +#define TS4800_WDT_FEED_2S 0x1 > +#define TS4800_WDT_FEED_10S 0x2 > +#define TS4800_WDT_DISABLE 0x3 > + > +struct ts4800_wdt { > + struct watchdog_device wdd; > + struct regmap *regmap; > + u32 feed_offset; > + u32 feed_val; > +}; > + > +/* > + * TS-4800 supports the following timeout values: > + * > + * value desc > + * --------------------- > + * 0 feed for 338ms > + * 1 feed for 2.706s > + * 2 feed for 10.824s > + * 3 disable watchdog > + * > + * Keep the regmap/timeout map ordered by timeout > + */ > +static const struct { > + const int timeout; > + const int regval; > +} ts4800_wdt_map[] = { > + { 2, TS4800_WDT_FEED_2S }, > + { 10, TS4800_WDT_FEED_10S }, > +}; > + > +#define MAX_TIMEOUT_INDEX (ARRAY_SIZE(ts4800_wdt_map) - 1) > + > +static void ts4800_write_feed(struct ts4800_wdt *wdt, u32 val) > +{ > + regmap_write(wdt->regmap, wdt->feed_offset, val); > +} > + > +static int ts4800_wdt_start(struct watchdog_device *wdd) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + > + ts4800_write_feed(wdt, wdt->feed_val); > + return 0; > +} > + > +static int ts4800_wdt_stop(struct watchdog_device *wdd) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + > + ts4800_write_feed(wdt, TS4800_WDT_DISABLE); > + return 0; > +} > + > +static int ts4800_wdt_set_timeout(struct watchdog_device *wdd, > + unsigned int timeout) > +{ > + struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); > + int i; > + > + for (i = 0; i < MAX_TIMEOUT_INDEX; i++) { > + if (ts4800_wdt_map[i].timeout >= timeout) > + break; > + } > + > + wdd->timeout = ts4800_wdt_map[i].timeout; > + wdt->feed_val = ts4800_wdt_map[i].regval; > + > + return 0; > +} > + > +static const struct watchdog_ops ts4800_wdt_ops = { > + .owner = THIS_MODULE, > + .start = ts4800_wdt_start, > + .stop = ts4800_wdt_stop, > + .set_timeout = ts4800_wdt_set_timeout, > +}; > + > +static const struct watchdog_info ts4800_wdt_info = { > + .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, > + .identity = "TS-4800 Watchdog", > +}; > + > +static int ts4800_wdt_probe(struct platform_device *pdev) > +{ > + struct device_node *np = pdev->dev.of_node; > + struct device_node *syscon_np; > + struct watchdog_device *wdd; > + struct ts4800_wdt *wdt; > + u32 reg; > + int ret; > + > + syscon_np = of_parse_phandle(np, "syscon", 0); > + if (!syscon_np) { > + dev_err(&pdev->dev, "no syscon property\n"); > + return -ENODEV; > + } > + > + ret = of_property_read_u32_index(np, "syscon", 1, ®); > + if (ret < 0) { > + dev_err(&pdev->dev, "no offset in syscon\n"); > + return ret; > + } > + > + /* allocate memory for watchdog struct */ > + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); > + if (!wdt) > + return -ENOMEM; > + > + /* set regmap and offset to know where to write */ > + wdt->feed_offset = reg; > + wdt->regmap = syscon_node_to_regmap(syscon_np); > + if (IS_ERR(wdt->regmap)) { > + dev_err(&pdev->dev, "cannot get parent's regmap\n"); > + return PTR_ERR(wdt->regmap); > + } > + > + /* Initialize struct watchdog_device */ > + wdd = &wdt->wdd; > + wdd->parent = &pdev->dev; > + wdd->info = &ts4800_wdt_info; > + wdd->ops = &ts4800_wdt_ops; > + wdd->min_timeout = ts4800_wdt_map[0].timeout; > + wdd->max_timeout = ts4800_wdt_map[MAX_TIMEOUT_INDEX].timeout; > + > + watchdog_set_drvdata(wdd, wdt); > + watchdog_set_nowayout(wdd, nowayout); > + watchdog_init_timeout(wdd, 0, &pdev->dev); > + > + /* > + * As this watchdog supports only a few values, ts4800_wdt_set_timeout > + * must be called to initialize timeout and feed_val with valid values. > + * Default to maximum timeout if none, or an invalid one, is provided in > + * device tree. > + */ > + if (!wdd->timeout) > + wdd->timeout = wdd->max_timeout; > + ts4800_wdt_set_timeout(wdd, wdd->timeout); > + > + /* > + * The feed register is write-only, so it is not possible to determine > + * watchdog's state. Disable it to be in a known state. > + */ > + ts4800_wdt_stop(wdd); > + > + ret = watchdog_register_device(wdd); > + if (ret) { > + dev_err(&pdev->dev, > + "failed to register watchdog device\n"); > + return ret; > + } > + > + platform_set_drvdata(pdev, wdt); > + > + dev_info(&pdev->dev, > + "initialized (timeout = %d sec, nowayout = %d)\n", > + wdd->timeout, nowayout); > + > + return 0; > +} > + > +static int ts4800_wdt_remove(struct platform_device *pdev) > +{ > + struct ts4800_wdt *wdt = platform_get_drvdata(pdev); > + > + watchdog_unregister_device(&wdt->wdd); > + > + return 0; > +} > + > +static const struct of_device_id ts4800_wdt_of_match[] = { > + { .compatible = "technologic,ts4800-wdt", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, ts4800_wdt_of_match); > + > +static struct platform_driver ts4800_wdt_driver = { > + .probe = ts4800_wdt_probe, > + .remove = ts4800_wdt_remove, > + .driver = { > + .name = "ts4800_wdt", > + .of_match_table = ts4800_wdt_of_match, > + }, > +}; > + > +module_platform_driver(ts4800_wdt_driver); > + > +MODULE_AUTHOR("Damien Riegel "); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:ts4800_wdt"); > -- > 2.5.0 >