From mboxrd@z Thu Jan  1 00:00:00 1970
From: Marek Vasut <marex@denx.de>
Date: Wed, 16 Dec 2015 18:11:06 +0100
Subject: [U-Boot] [PATCH 1/2] arm: imx6: Add DDR3 calibration code for
	MX6 Q/D/DL
In-Reply-To: <56719A36.5060803@nelint.com>
References: <1450276807-8960-1-git-send-email-marex@denx.de>
 <201512161750.44229.marex@denx.de> <56719A36.5060803@nelint.com>
Message-ID: <201512161811.06996.marex@denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On Wednesday, December 16, 2015 at 06:07:02 PM, Eric Nelson wrote:
> Hi Marek,

Hi!

> On 12/16/2015 09:50 AM, Marek Vasut wrote:
> > On Wednesday, December 16, 2015 at 05:28:48 PM, Eric Nelson wrote:
> >> On 12/16/2015 08:33 AM, Marek Vasut wrote:
> >>> On Wednesday, December 16, 2015 at 04:00:38 PM, Eric Nelson wrote:
> ...
> 
> >>> I don't have SX/SL, so I couldn't test it there.
> >> 
> >> I have a couple of SL boards, so I can do that (mx6slevk and a custom
> >> board using DDR3). Both of them support SPL, so it shouldn't take
> >> long to validate.
> > 
> > Excellent! Let's do this as a subsequent patch though, since this code is
> > actually tested extensively and I'd like to keep it as a reference for
> > possible bisecting ;-)
> 
> Will do.
> 
> I'll review and test your patch first, then follow up with SoloLite and
> LPDDR2 support.

Excellent, thanks!

Best regards,
Marek Vasut