From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Mon, 21 Dec 2015 21:27:01 +0100 Subject: [U-Boot] [PATCH 2/2 v2] usb: musb: Fix hub port number for SPLIT transactions In-Reply-To: <5678540B.2070709@redhat.com> References: <5675A1A6.2000607@redhat.com> <1450556218-26067-2-git-send-email-stefan.bruens@rwth-aachen.de> <5678540B.2070709@redhat.com> Message-ID: <201512212127.01731.marex@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Monday, December 21, 2015 at 08:33:31 PM, Hans de Goede wrote: > Hi, > > On 19-12-15 21:16, Stefan Br?ns wrote: > > The ifdef'ed Linux kernel code uses the 1 based port number, whereas > > U-Boot puts a 0 based port number into the register. The reason the 0 > > based port number apparently works can probably be taken from the USB > > 2.0 spec: > > > > 8.4.2.2 Start-Split Transaction Token > > ... The host must correctly set the port field for single and multiple TT > > hub implementations. A single TT hub implementation *may ignore* the port > > field. > > > > Actually, as far as I unterstand, a multi TT hub defaults to single TT > > (bAlternateSetting: 0) until switched via SetInterface, so even "port 42" > > would work. > > > > The change was verified by hardcoding the port number to a wrong value, > > SPLIT transactions kept working (although using a DWC2 instead of MUSB). > > Tested hubs are the RPi onboard SMC9514 and an external "05e3:0608 > > Genesys Logic, Inc. USB-2.0 4-Port HUB". The former is a multi TT hub, > > the latter single TT only. > > > > Signed-off-by: Stefan Br?ns > > --- > > > > drivers/usb/musb-new/musb_host.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/usb/musb-new/musb_host.c > > b/drivers/usb/musb-new/musb_host.c index fc4ba62..5c028d4 100644 > > --- a/drivers/usb/musb-new/musb_host.c > > +++ b/drivers/usb/musb-new/musb_host.c > > @@ -2096,7 +2096,7 @@ int musb_urb_enqueue( > > > > uint8_t hubaddr = 0; > > usb_find_usb2_hub_address_port(udev, &hubaddr, &portnr) > > qh->h_addr_reg = hubaddr; > > > > - qh->h_port_reg = portnr - 1; > > + qh->h_port_reg = portnr; > > > > } > > > > #endif > > > > } > > This patch needs to be re-spun to apply on top of the compile fixed [patch > 1/2] of this set. With that done this patch is: > > Reviewed-by: Hans de Goede > Tested-by: Hans de Goede OK, would you, Stefan, please resend the patchset with the necessary Reviewed-by etc so I can pick it ? This thread is a chaos and I am lost. Thanks! Best regards, Marek Vasut