From mboxrd@z Thu Jan 1 00:00:00 1970 From: Albert ARIBAUD Date: Tue, 26 Jan 2016 17:09:59 +0100 Subject: [U-Boot] [PATCH v2 0/2] net: phy: mv88e61xx: Revise as a PHY driver In-Reply-To: <1450734319-9515-2-git-send-email-kevin.smith@elecsyscorp.com> References: <1450734319-9515-1-git-send-email-kevin.smith@elecsyscorp.com> <1450734319-9515-2-git-send-email-kevin.smith@elecsyscorp.com> Message-ID: <20160126170959.32bbae7c@lilith> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello Kevin, On Mon, 21 Dec 2015 21:45:32 +0000, Kevin Smith wrote: > The previous version of this driver implemented a shell command to manually > comfigure the switch. It did not integrate with the PHY infrastructure to > allow a MAC to use it as its PHY. This is a complete rewrite to allow this > switch to function as a driver. Since none of the original driver remains, the > old driver is first removed and the new PHY driver is added. > > This version configures the switch to have a CPU connected over an MII > interface. It will enable PHY interfaces based on the MV88E61XX_PHY_PORTS > macro. The switch is configured to allow PHY ports to only communicate to the > CPU. This allows the switch to be used as a basic PHY on any/all ports. > > This was developed on a board with an mv88e6176 connected over SGMII. It is > intended to work with other configurations, but these could not be tested. Any > testing on other configurations or with other mv88e61xx chips is appreciated. Actually the driver was for the Wireless Space, which was removed but which I will resurrect as I did the Open-RDs. I will test the switch on the WS I have. Amicalement, -- Albert.