From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH v6 7/7] ARM: dts: imx: Add support for Advantech/GE B850v3 Date: Thu, 28 Jan 2016 14:26:39 +0800 Message-ID: <20160128062639.GH9070@tiger> References: <1450908016-17384-1-git-send-email-akshay.bhat@timesys.com> <1450908016-17384-8-git-send-email-akshay.bhat@timesys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1450908016-17384-8-git-send-email-akshay.bhat-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Akshay Bhat Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org, galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, justin.waters-jEh4hwF5bVhBDgjK7y7TUQ@public.gmane.org, l.stach-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, Dec 23, 2015 at 05:00:16PM -0500, Akshay Bhat wrote: > Add support for Advantech/GE B850v3 board. > > Signed-off-by: Akshay Bhat > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-b850v3.dts | 157 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 158 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 684a504..b6c6d7a 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -319,6 +319,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-arm2.dtb \ > imx6q-b450v3.dtb \ > imx6q-b650v3.dtb \ > + imx6q-b850v3.dtb \ > imx6q-cm-fx6.dtb \ > imx6q-cubox-i.dtb \ > imx6q-dfi-fs700-m60.dtb \ > diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts > new file mode 100644 > index 0000000..318ba65 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-b850v3.dts > @@ -0,0 +1,157 @@ > +/* > + * Copyright 2015 Timesys Corporation. > + * Copyright 2015 General Electric Company > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include "imx6q-bx50v3.dtsi" > + > +/ { > + model = "General Electric B850v3"; > + compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q"; > + > + chosen { > + stdout-path = &uart3; > + }; > + > + panel_lvds0 { Hyphen please. > + compatible = "auo,b133htn01"; > + backlight = <&backlight_lvds>; > + ddc-i2c-bus = <&mux_i2c12>; > + > + port { > + panel_in_lvds0: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + }; > +}; > + > +&ldb { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, > + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > + fsl,dual-channel; > + status = "okay"; > + > + lvds0: lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <24>; > + status = "okay"; > + > + port@4 { > + reg = <4>; > + > + lvds0_out: endpoint { > + remote-endpoint = <&panel_in_lvds0>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + pca9547_ddc: mux@70 { > + compatible = "nxp,pca9547"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + mux_i2c11: i2c@0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + }; > + > + mux_i2c12: i2c@1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + }; > + > + mux_i2c13: i2c@2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + }; > + > + mux_i2c14: i2c@3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + }; > + > + mux_i2c15: i2c@4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + > + mux_i2c16: i2c@5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + }; > + > + mux_i2c17: i2c@6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + }; > + > + mux_i2c18: i2c@7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + }; > + }; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&mux_i2c11>; > +}; > + > +&mux_i2c3 { > + ads7830_2: ads7830@4a { What's the point to get this node labelled? Where is ads7830_1? Shawn > + compatible = "ti,ads7830"; > + reg = <0x4a>; > + }; > +}; > -- > 2.6.3 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: shawnguo@kernel.org (Shawn Guo) Date: Thu, 28 Jan 2016 14:26:39 +0800 Subject: [PATCH v6 7/7] ARM: dts: imx: Add support for Advantech/GE B850v3 In-Reply-To: <1450908016-17384-8-git-send-email-akshay.bhat@timesys.com> References: <1450908016-17384-1-git-send-email-akshay.bhat@timesys.com> <1450908016-17384-8-git-send-email-akshay.bhat@timesys.com> Message-ID: <20160128062639.GH9070@tiger> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Dec 23, 2015 at 05:00:16PM -0500, Akshay Bhat wrote: > Add support for Advantech/GE B850v3 board. > > Signed-off-by: Akshay Bhat > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/imx6q-b850v3.dts | 157 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 158 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6q-b850v3.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 684a504..b6c6d7a 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -319,6 +319,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-arm2.dtb \ > imx6q-b450v3.dtb \ > imx6q-b650v3.dtb \ > + imx6q-b850v3.dtb \ > imx6q-cm-fx6.dtb \ > imx6q-cubox-i.dtb \ > imx6q-dfi-fs700-m60.dtb \ > diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts > new file mode 100644 > index 0000000..318ba65 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-b850v3.dts > @@ -0,0 +1,157 @@ > +/* > + * Copyright 2015 Timesys Corporation. > + * Copyright 2015 General Electric Company > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This file is distributed in the hope that it will be useful > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > + > +#include "imx6q-bx50v3.dtsi" > + > +/ { > + model = "General Electric B850v3"; > + compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q"; > + > + chosen { > + stdout-path = &uart3; > + }; > + > + panel_lvds0 { Hyphen please. > + compatible = "auo,b133htn01"; > + backlight = <&backlight_lvds>; > + ddc-i2c-bus = <&mux_i2c12>; > + > + port { > + panel_in_lvds0: endpoint { > + remote-endpoint = <&lvds0_out>; > + }; > + }; > + }; > +}; > + > +&ldb { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, > + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > + fsl,dual-channel; > + status = "okay"; > + > + lvds0: lvds-channel at 0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <24>; > + status = "okay"; > + > + port at 4 { > + reg = <4>; > + > + lvds0_out: endpoint { > + remote-endpoint = <&panel_in_lvds0>; > + }; > + }; > + }; > +}; > + > +&i2c2 { > + pca9547_ddc: mux at 70 { > + compatible = "nxp,pca9547"; > + reg = <0x70>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + mux_i2c11: i2c at 0 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x0>; > + }; > + > + mux_i2c12: i2c at 1 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x1>; > + }; > + > + mux_i2c13: i2c at 2 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x2>; > + }; > + > + mux_i2c14: i2c at 3 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x3>; > + }; > + > + mux_i2c15: i2c at 4 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x4>; > + }; > + > + mux_i2c16: i2c at 5 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x5>; > + }; > + > + mux_i2c17: i2c at 6 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x6>; > + }; > + > + mux_i2c18: i2c at 7 { > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0x7>; > + }; > + }; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&mux_i2c11>; > +}; > + > +&mux_i2c3 { > + ads7830_2: ads7830 at 4a { What's the point to get this node labelled? Where is ads7830_1? Shawn > + compatible = "ti,ads7830"; > + reg = <0x4a>; > + }; > +}; > -- > 2.6.3 > >