From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752404AbcBBDjD (ORCPT ); Mon, 1 Feb 2016 22:39:03 -0500 Received: from mail-pf0-f180.google.com ([209.85.192.180]:36715 "EHLO mail-pf0-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752007AbcBBDjA (ORCPT ); Mon, 1 Feb 2016 22:39:00 -0500 Date: Tue, 2 Feb 2016 09:08:56 +0530 From: Viresh Kumar To: Stephen Boyd Cc: Rafael Wysocki , linaro-kernel@lists.linaro.org, linux-pm@vger.kernel.org, nm@ti.com, Greg Kroah-Hartman , Len Brown , open list , Pavel Machek , Viresh Kumar Subject: Re: [PATCH V2 07/16] PM / OPP: Add dev_pm_opp_set_rate() Message-ID: <20160202033856.GB31828@vireshk> References: <9151a47d7235855032be559372398edf809fe52b.1453965717.git.viresh.kumar@linaro.org> <20160202021046.GH4848@codeaurora.org> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20160202021046.GH4848@codeaurora.org> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 01-02-16, 18:10, Stephen Boyd wrote: > clk = ERR_CAST(dev_opp); > > not available? > > Why is current capitalized? > > The error gotos above this don't have rcu lock held, so this is > sometimes wrong to do. -------------------------8<------------------------- From: Viresh Kumar Date: Fri, 4 Sep 2015 12:28:39 +0530 Subject: [PATCH] PM / OPP: Add dev_pm_opp_set_rate() This adds a routine, dev_pm_opp_set_rate(), responsible for configuring power-supply and clock source for an OPP. The OPP is found by matching against the target_freq passed to the routine. This shall replace similar code present in most of the OPP users and help simplify them a lot. Signed-off-by: Viresh Kumar --- drivers/base/power/opp/core.c | 176 ++++++++++++++++++++++++++++++++++++++++++ include/linux/pm_opp.h | 6 ++ 2 files changed, 182 insertions(+) diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 7d7749ce1ce4..ab711c2c3e00 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -529,6 +529,182 @@ struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev, } EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor); +/* + * The caller needs to ensure that device_opp (and hence the clk) isn't freed, + * while clk returned here is used. + */ +static struct clk *_get_opp_clk(struct device *dev) +{ + struct device_opp *dev_opp; + struct clk *clk; + + rcu_read_lock(); + + dev_opp = _find_device_opp(dev); + if (IS_ERR(dev_opp)) { + dev_err(dev, "%s: device opp doesn't exist\n", __func__); + clk = ERR_CAST(dev_opp); + goto unlock; + } + + clk = dev_opp->clk; + if (IS_ERR(clk)) + dev_err(dev, "%s: No clock available for the device\n", + __func__); + +unlock: + rcu_read_unlock(); + return clk; +} + +static int _set_opp_voltage(struct device *dev, struct regulator *reg, + unsigned long u_volt, unsigned long u_volt_min, + unsigned long u_volt_max) +{ + int ret; + + /* Regulator not available for device */ + if (IS_ERR(reg)) { + dev_dbg(dev, "%s: regulator not available: %ld\n", __func__, + PTR_ERR(reg)); + return 0; + } + + dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min, + u_volt, u_volt_max); + + ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt, + u_volt_max); + if (ret) + dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n", + __func__, u_volt_min, u_volt, u_volt_max, ret); + + return ret; +} + +/** + * dev_pm_opp_set_rate() - Configure new OPP based on frequency + * @dev: device for which we do this operation + * @target_freq: frequency to achieve + * + * This configures the power-supplies and clock source to the levels specified + * by the OPP corresponding to the target_freq. + * + * Locking: This function takes rcu_read_lock(). + */ +int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) +{ + struct device_opp *dev_opp; + struct dev_pm_opp *old_opp, *opp; + struct regulator *reg; + struct clk *clk; + unsigned long freq, old_freq; + unsigned long u_volt, u_volt_min, u_volt_max; + unsigned long ou_volt, ou_volt_min, ou_volt_max; + int ret; + + if (unlikely(!target_freq)) { + dev_err(dev, "%s: Invalid target frequency %lu\n", __func__, + target_freq); + return -EINVAL; + } + + clk = _get_opp_clk(dev); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + freq = clk_round_rate(clk, target_freq); + if ((long)freq <= 0) + freq = target_freq; + + old_freq = clk_get_rate(clk); + + /* Return early if nothing to do */ + if (old_freq == freq) { + dev_dbg(dev, "%s: old/new frequencies (%lu Hz) are same, nothing to do\n", + __func__, freq); + return 0; + } + + rcu_read_lock(); + + dev_opp = _find_device_opp(dev); + if (IS_ERR(dev_opp)) { + dev_err(dev, "%s: device opp doesn't exist\n", __func__); + rcu_read_unlock(); + return PTR_ERR(dev_opp); + } + + old_opp = dev_pm_opp_find_freq_ceil(dev, &old_freq); + if (!IS_ERR(old_opp)) { + ou_volt = old_opp->u_volt; + ou_volt_min = old_opp->u_volt_min; + ou_volt_max = old_opp->u_volt_max; + } else { + dev_err(dev, "%s: failed to find current OPP for freq %lu (%ld)\n", + __func__, old_freq, PTR_ERR(old_opp)); + } + + opp = dev_pm_opp_find_freq_ceil(dev, &freq); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n", + __func__, freq, ret); + rcu_read_unlock(); + return ret; + } + + u_volt = opp->u_volt; + u_volt_min = opp->u_volt_min; + u_volt_max = opp->u_volt_max; + + reg = dev_opp->regulator; + + rcu_read_unlock(); + + /* Scaling up? Scale voltage before frequency */ + if (freq > old_freq) { + ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min, + u_volt_max); + if (ret) + goto restore_voltage; + } + + /* Change frequency */ + + dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", + __func__, old_freq, freq); + + ret = clk_set_rate(clk, freq); + if (ret) { + dev_err(dev, "%s: failed to set clock rate: %d\n", __func__, + ret); + goto restore_voltage; + } + + /* Scaling down? Scale voltage after frequency */ + if (freq < old_freq) { + ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min, + u_volt_max); + if (ret) + goto restore_freq; + } + + return 0; + +restore_freq: + if (clk_set_rate(clk, old_freq)) + dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n", + __func__, old_freq); +restore_voltage: + /* This shouldn't harm even if the voltages weren't updated earlier */ + if (!IS_ERR(old_opp)) + _set_opp_voltage(dev, reg, ou_volt, ou_volt_min, ou_volt_max); + + return ret; +} +EXPORT_SYMBOL_GPL(dev_pm_opp_set_rate); + /* List-dev Helpers */ static void _kfree_list_dev_rcu(struct rcu_head *head) { diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h index 59da3d9e11ea..cccaf4a29e9f 100644 --- a/include/linux/pm_opp.h +++ b/include/linux/pm_opp.h @@ -64,6 +64,7 @@ int dev_pm_opp_set_prop_name(struct device *dev, const char *name); void dev_pm_opp_put_prop_name(struct device *dev); int dev_pm_opp_set_regulator(struct device *dev, const char *name); void dev_pm_opp_put_regulator(struct device *dev); +int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq); #else static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp) { @@ -172,6 +173,11 @@ static inline int dev_pm_opp_set_regulator(struct device *dev, const char *name) static inline void dev_pm_opp_put_regulator(struct device *dev) {} +static inline int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) +{ + return -EINVAL; +} + #endif /* CONFIG_PM_OPP */ #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)