All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: dirk.behme@gmail.com
Cc: rtc-linux <rtc-linux@googlegroups.com>,
	dirk.behme@de.bosch.com, linux@rempel-privat.de
Subject: [rtc-linux] Re: rtc: RV8803: BUG: scheduling while atomic
Date: Wed, 3 Feb 2016 15:18:20 +0100	[thread overview]
Message-ID: <20160203141820.GB20165@piout.net> (raw)
In-Reply-To: <15c6e090-33f5-4dd4-82bc-d8b7b1f62dcd@googlegroups.com>

On 03/02/2016 at 04:58:53 -0800, dirk.behme@gmail.com wrote :
> Anything like below [1]?
> 
> If you like this, we'll test it.
> 

This seems ok to me.

> Many thanks
> 
> Dirk
> 
> [1]
> 
> diff --git a/drivers/rtc/rtc-rv8803.c b/drivers/rtc/rtc-rv8803.c
> index 33c7e2a..38621ff 100644
> --- a/drivers/rtc/rtc-rv8803.c
> +++ b/drivers/rtc/rtc-rv8803.c
> @@ -52,7 +52,7 @@
>  struct rv8803_data {
>      struct i2c_client *client;
>      struct rtc_device *rtc;
> -    spinlock_t flags_lock;
> +    struct mutex flags_lock;
>      u8 ctrl;
>  };
>  
> @@ -63,11 +63,11 @@ static irqreturn_t rv8803_handle_irq(int irq, void 
> *dev_id)
>      unsigned long events = 0;
>      u8 flags;
>  
> -    spin_lock(&rv8803->flags_lock);
> +    mutex_lock(&rv8803->flags_lock);
>  
>      flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
>      if (flags <= 0) {
> -        spin_unlock(&rv8803->flags_lock);
> +        mutex_unlock(&rv8803->flags_lock);
>          return IRQ_NONE;
>      }
>  
> @@ -102,7 +102,7 @@ static irqreturn_t rv8803_handle_irq(int irq, void 
> *dev_id)
>                        rv8803->ctrl);
>      }
>  
> -    spin_unlock(&rv8803->flags_lock);
> +    mutex_unlock(&rv8803->flags_lock);
>  
>      return IRQ_HANDLED;
>  }
> @@ -155,7 +155,6 @@ static int rv8803_set_time(struct device *dev, struct 
> rtc_time *tm)
>      struct rv8803_data *rv8803 = dev_get_drvdata(dev);
>      u8 date[7];
>      int flags, ret;
> -    unsigned long irqflags;
>  
>      if ((tm->tm_year < 100) || (tm->tm_year > 199))
>          return -EINVAL;
> @@ -173,18 +172,18 @@ static int rv8803_set_time(struct device *dev, struct 
> rtc_time *tm)
>      if (ret < 0)
>          return ret;
>  
> -    spin_lock_irqsave(&rv8803->flags_lock, irqflags);
> +    mutex_lock(&rv8803->flags_lock);
>  
>      flags = i2c_smbus_read_byte_data(rv8803->client, RV8803_FLAG);
>      if (flags < 0) {
> -        spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +        mutex_unlock(&rv8803->flags_lock);
>          return flags;
>      }
>  
>      ret = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG,
>                      flags & ~RV8803_FLAG_V2F);
>  
> -    spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +    mutex_unlock(&rv8803->flags_lock);
>  
>      return ret;
>  }
> @@ -226,7 +225,7 @@ static int rv8803_set_alarm(struct device *dev, struct 
> rtc_wkalrm *alrm)
>      u8 alarmvals[3];
>      u8 ctrl[2];
>      int ret, err;
> -    unsigned long alarm_time, irqflags;
> +    unsigned long alarm_time;
>  
>      /* The alarm has no seconds, round up to nearest minute */
>      if (alrm->time.tm_sec) {
> @@ -236,11 +235,11 @@ static int rv8803_set_alarm(struct device *dev, 
> struct rtc_wkalrm *alrm)
>          rtc_time_to_tm(alarm_time, &alrm->time);
>      }
>  
> -    spin_lock_irqsave(&rv8803->flags_lock, irqflags);
> +    mutex_lock(&rv8803->flags_lock);
>  
>      ret = i2c_smbus_read_i2c_block_data(client, RV8803_FLAG, 2, ctrl);
>      if (ret != 2) {
> -        spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +        mutex_unlock(&rv8803->flags_lock);
>          return ret < 0 ? ret : -EIO;
>      }
>  
> @@ -253,14 +252,14 @@ static int rv8803_set_alarm(struct device *dev, 
> struct rtc_wkalrm *alrm)
>          err = i2c_smbus_write_byte_data(rv8803->client, RV8803_CTRL,
>                          rv8803->ctrl);
>          if (err) {
> -            spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +            mutex_unlock(&rv8803->flags_lock);
>              return err;
>          }
>      }
>  
>      ctrl[1] &= ~RV8803_FLAG_AF;
>      err = i2c_smbus_write_byte_data(rv8803->client, RV8803_FLAG, ctrl[1]);
> -    spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +    mutex_unlock(&rv8803->flags_lock);
>      if (err)
>          return err;
>  
> @@ -289,7 +288,6 @@ static int rv8803_alarm_irq_enable(struct device *dev, 
> unsigned int enabled)
>      struct i2c_client *client = to_i2c_client(dev);
>      struct rv8803_data *rv8803 = dev_get_drvdata(dev);
>      int ctrl, flags, err;
> -    unsigned long irqflags;
>  
>      ctrl = rv8803->ctrl;
>  
> @@ -305,15 +303,15 @@ static int rv8803_alarm_irq_enable(struct device 
> *dev, unsigned int enabled)
>              ctrl &= ~RV8803_CTRL_AIE;
>      }
>  
> -    spin_lock_irqsave(&rv8803->flags_lock, irqflags);
> +    mutex_lock(&rv8803->flags_lock);
>      flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
>      if (flags < 0) {
> -        spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +        mutex_unlock(&rv8803->flags_lock);
>          return flags;
>      }
>      flags &= ~(RV8803_FLAG_AF | RV8803_FLAG_UF);
>      err = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
> -    spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +    mutex_unlock(&rv8803->flags_lock);
>      if (err)
>          return err;
>  
> @@ -333,7 +331,6 @@ static int rv8803_ioctl(struct device *dev, unsigned 
> int cmd, unsigned long arg)
>      struct i2c_client *client = to_i2c_client(dev);
>      struct rv8803_data *rv8803 = dev_get_drvdata(dev);
>      int flags, ret = 0;
> -    unsigned long irqflags;
>  
>      switch (cmd) {
>      case RTC_VL_READ:
> @@ -355,16 +352,16 @@ static int rv8803_ioctl(struct device *dev, unsigned 
> int cmd, unsigned long arg)
>          return 0;
>  
>      case RTC_VL_CLR:
> -        spin_lock_irqsave(&rv8803->flags_lock, irqflags);
> +        mutex_lock(&rv8803->flags_lock);
>          flags = i2c_smbus_read_byte_data(client, RV8803_FLAG);
>          if (flags < 0) {
> -            spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +            mutex_unlock(&rv8803->flags_lock);
>              return flags;
>          }
>  
>          flags &= ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F);
>          ret = i2c_smbus_write_byte_data(client, RV8803_FLAG, flags);
> -        spin_unlock_irqrestore(&rv8803->flags_lock, irqflags);
> +        mutex_unlock(&rv8803->flags_lock);
>          if (ret < 0)
>              return ret;
>  
> @@ -441,6 +438,7 @@ static int rv8803_probe(struct i2c_client *client,
>      if (!rv8803)
>          return -ENOMEM;
>  
> +    mutex_init(&rv8803->flags_lock);
>      rv8803->client = client;
>      i2c_set_clientdata(client, rv8803);
>  
> 
> 
> 
>  


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

      reply	other threads:[~2016-02-03 14:18 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-03  9:31 [rtc-linux] rtc: RV8803: BUG: scheduling while atomic dirk.behme
2016-02-03 11:07 ` [rtc-linux] " Alexandre Belloni
2016-02-03 12:58   ` dirk.behme
2016-02-03 14:18     ` Alexandre Belloni [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160203141820.GB20165@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=dirk.behme@de.bosch.com \
    --cc=dirk.behme@gmail.com \
    --cc=linux@rempel-privat.de \
    --cc=rtc-linux@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.