From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas =?iso-8859-1?Q?Bie=DFmann?= Date: Thu, 18 Feb 2016 21:25:40 +0100 Subject: [U-Boot] [U-Boot, v3, 4/4] board: atmel: siemens: clean up UTMI PLL code In-Reply-To: <1454382714-8712-5-git-send-email-wenyou.yang@atmel.com> References: <1454382714-8712-5-git-send-email-wenyou.yang@atmel.com> Message-ID: <20160218202540.GD40739@imac.int.er.biessmann.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On Tue, Feb 02, 2016 at 11:11:54AM +0800, Wenyou Yang wrote: > Due to introducing the new UTMI PLL clock handle functions, > use the functions to reduce the duplicated code. > > Signed-off-by: Wenyou Yang > Tested-by: Heiko Schocher Reviewed-by: Andreas Bie?mann > --- > > Changes in v3: > - collect Tested-by from Heiko Schocher. > > Changes in v2: None > > board/siemens/corvus/board.c | 4 +--- > 1 file changed, 1 insertion(+), 3 deletions(-) > > diff --git a/board/siemens/corvus/board.c b/board/siemens/corvus/board.c > index 8729fe9..658e029 100644 > --- a/board/siemens/corvus/board.c > +++ b/board/siemens/corvus/board.c > @@ -207,10 +207,8 @@ int board_early_init_f(void) > /* from ./arch/arm/mach-at91/armv7/sama5d3_devices.c */ > void at91_udp_hw_init(void) > { > - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; > - > /* Enable UPLL clock */ > - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); > + at91_upll_clk_enable(); > > /* Enable UDPHS clock */ > at91_periph_clk_enable(ATMEL_ID_UDPHS);